ubuntuusers.de

M.2-Karte mit pi5 und Ubuntu

Status: Ungelöst | Ubuntu-Version: Ubuntu 23.10 (Mantic Minotaur)
Antworten |

kamirha

Anmeldungsdatum:
12. Januar 2024

Beiträge: 5

Servus zusammen,

vorab die Info, ich bin kompletter neuling im Thema,habt also ein bischen Nachsicht, falls ich blöde Fragen stelle. ☺

Ich habe einen pi5 mit Ubuntu 23.10 ausgestattet. Dazu einen HAT von pinebarry mit einer Corsair M.2-Karte. Diese wird leider nicht erkannt, unter piOS allerdings schon. Habt ihr eine Ahnung was ich tun muss, das die Karte erkannt wird? Ich möchte diese nur als Speicher verwenden, nicht zum booten!

Bisher habe ich nur in der config.txt unter /boot/ die Zeile

dtparam=nvme

hinzugefügt. Hier schon die erste Frage. Ist das Verzeichnis korrekt? Ich finde unter /boot/firmware auch eine config.tct Datei, die schon befüllt ist. Die Datei unter /boot ist leer bzw. jeztzt nur mit meiner Zeile befüllt.

Hoffe ihr könnt mir helfen ☺

Lidux

Anmeldungsdatum:
18. April 2007

Beiträge: 16531

Hallo kamirha,

Herzlich Willkommen auf Ubuntuusers.

Ich kann mich noch erinnern das da mal ein Artikel im PLANETEN war / ist zu diesem.

Gruss Lidux

kamirha

(Themenstarter)

Anmeldungsdatum:
12. Januar 2024

Beiträge: 5

Und was ist das?

Lidux

Anmeldungsdatum:
18. April 2007

Beiträge: 16531

Hallo kamirha,

Ubuntuusers.de - rechts oben vor "Mitmachen" .....

Gruss Lidux

noisefloor Team-Icon

Anmeldungsdatum:
6. Juni 2006

Beiträge: 29567

Hallo,

so grundsätzlich muss Hardware von verwendeten Linux-Kernel erkannt werden = ein Treiber dafür da sein, damit man sie nutzen kann. Scheinbar hat der Raspberry Pi OS Kernel das und der Ubuntu Kernel nicht.

Was tu machen könntest ist versuchen herauszufinden, welche Treiber Raspberry Pi OS für den HAT nutzt und dann schauen, ob man den Treiber auch für den Ubuntu Kernel installieren kann. Keine Ahnung, wie aufwendig das ganze ist, wenn es möglich ist.

Gruß, noisefloor

kamirha

(Themenstarter)

Anmeldungsdatum:
12. Januar 2024

Beiträge: 5

Ich werde aus der ganzen Linux-Kiste nicht schlau. Mittlerweile habe ich es geschafft, dass die Karte ab und zu in Ubuntu auftaucht und auch in meine VMS eingebunden ist. ABER, beim nächsten Neustart ist sie wieder weg. Dann brauche ich gefühlt wieder 20 Neustarts bis sie irgendwann wieder auftaucht. Wenn ich die Karte an eine M2 Dockingstation hänge ist sie permanent verfügbar, acuh dem Neustart. Aber das liegt vermutlich an der anderen Schnittstelle, also USB in dem Fall.

Ich weiß nicht was das soll, die Karte scheint intakt zu sein. Liegt das am pi5, am HAT oder ist das ein Treiber Ubuntu Problem?

tomtomtom Team-Icon

Supporter
Avatar von tomtomtom

Anmeldungsdatum:
22. August 2008

Beiträge: 54980

Wohnort: Berlin

Was sagt denn

sudo dmesg

? Gerne sowohl mit erkannter Karte als auch ohne.

kB Team-Icon

Supporter, Wikiteam
Avatar von kB

Anmeldungsdatum:
4. Oktober 2007

Beiträge: 9384

Wohnort: Münster

kamirha schrieb:

[…] Dann brauche ich gefühlt wieder 20 Neustarts bis sie irgendwann wieder auftaucht.

Wenn etwas sporadisch verfügbar ist und dann wieder nicht, liegt das oft an der Stromversorgung. Besonders beim RPi.

kamirha

(Themenstarter)

Anmeldungsdatum:
12. Januar 2024

Beiträge: 5

tomtomtom schrieb:

Was sagt denn

sudo dmesg

? Gerne sowohl mit erkannter Karte als auch ohne.

Da bekomme ich eine menge ausgespuckt. Das ist jetzt ohne Karte. Ich bekomme die Karte jetzt wieder nicht rein.

  0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[    0.000000] Linux version 6.5.0-1008-raspi (buildd@bos02-arm64-062) (aarch64-linux-gnu-gcc-13 (Ubuntu 13.2.0-4ubuntu3) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.41) #11-Ubuntu SMP PREEMPT_DYNAMIC Wed Nov 22 19:08:26 UTC 2023 (Ubuntu 6.5.0-1008.11-raspi 6.5.3)
[    0.000000] KASLR enabled
[    0.000000] random: crng init done
[    0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000001e00000, size 320 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x0000000001e00000..0x0000000015dfffff (327680 KiB) map reusable linux,cma
[    0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
[    0.000000] OF: reserved mem: 0x000000003fd16600..0x000000003fd16636 (0 KiB) nomap non-reusable nvram@0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000007ffff]
[    0.000000]   node   0: [mem 0x0000000000080000-0x000000003f7fffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] On node 0, zone DMA: 2048 pages in unavailable ranges
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 30 pages/cpu s85928 r8192 d28760 u122880
[    0.000000] pcpu-alloc: s85928 r8192 d28760 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: Hardware dirty bit management
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=D8:3A:DD:A1:92:CC vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  zswap.enabled=1 zswap.zpool=z3fold zswap.compressor=zstd multipath=off dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 rootwait fixrtc quiet splash
[    0.000000] Unknown kernel command line parameters "fixrtc splash multipath=off", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2062336
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 7776620K/8380416K available (14400K kernel code, 2578K rwdata, 4452K rodata, 6144K init, 826K bss, 276116K reserved, 327680K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 42938 entries in 168 pages
[    0.000000] ftrace: allocated 168 pages with 3 groups
[    0.000000] trace event string verifier disabled
[    0.000000] Dynamic Preempt: full
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000165] Console: colour dummy device 80x25
[    0.000172] printk: console [tty1] enabled
[    0.000208] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000215] pid_max: default: 32768 minimum: 301
[    0.000390] LSM: initializing lsm=lockdown,capability,yama,apparmor,integrity
[    0.000495] Yama: becoming mindful.
[    0.000541] AppArmor: AppArmor initialized
[    0.000644] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000668] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.001597] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.001635] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.001675] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.001767] rcu: Hierarchical SRCU implementation.
[    0.001770] rcu: 	Max phase no-delay instances is 1000.
[    0.002588] smp: Bringing up secondary CPUs ...
[    0.002826] Detected PIPT I-cache on CPU1
[    0.002873] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[    0.003139] Detected PIPT I-cache on CPU2
[    0.003176] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[    0.003423] Detected PIPT I-cache on CPU3
[    0.003458] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[    0.003499] smp: Brought up 1 node, 4 CPUs
[    0.003505] SMP: Total of 4 processors activated.
[    0.003508] CPU features: detected: 32-bit EL0 Support
[    0.003511] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.003514] CPU features: detected: Common not Private translations
[    0.003517] CPU features: detected: CRC32 instructions
[    0.003519] CPU features: detected: Data cache clean to Point of Persistence
[    0.003523] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.003526] CPU features: detected: LSE atomic instructions
[    0.003529] CPU features: detected: Privileged Access Never
[    0.003533] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.003572] CPU: All CPU(s) started at EL2
[    0.003575] alternatives: applying system-wide alternatives
[    0.005915] devtmpfs: initialized
[    0.009060] Enabled cp15_barrier support
[    0.009067] Enabled setend support
[    0.009126] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.009135] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.012538] pinctrl core: initialized pinctrl subsystem
[    0.012967] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.013427] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.013500] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.013671] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.013693] audit: initializing netlink subsys (disabled)
[    0.013751] audit: type=2000 audit(0.012:1): state=initialized audit_enabled=0 res=1
[    0.013907] thermal_sys: Registered thermal governor 'fair_share'
[    0.013910] thermal_sys: Registered thermal governor 'bang_bang'
[    0.013913] thermal_sys: Registered thermal governor 'step_wise'
[    0.013916] thermal_sys: Registered thermal governor 'user_space'
[    0.013933] cpuidle: using governor ladder
[    0.013943] cpuidle: using governor menu
[    0.014039] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.014083] ASID allocator initialised with 32768 entries
[    0.014426] Serial: AMBA PL011 UART driver
[    0.016138] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[    0.016985] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
[    0.025248] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-01-05T15:57:40, variant start_cd
[    0.029253] raspberrypi-firmware soc:firmware: Firmware hash is 30cc5f3700000000000000000000000000000000
[    0.037882] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[    0.037886] Modules: 0 pages in range for non-PLT usage
[    0.037889] Modules: 517136 pages in range for PLT usage
[    0.038245] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.038250] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.038254] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.038256] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.038259] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.038262] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.038265] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.038267] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.039009] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[    0.040079] iommu: Default domain type: Translated
[    0.040083] iommu: DMA domain TLB invalidation policy: strict mode
[    0.040203] SCSI subsystem initialized
[    0.040246] usbcore: registered new interface driver usbfs
[    0.040258] usbcore: registered new interface driver hub
[    0.040270] usbcore: registered new device driver usb
[    0.040293] pps_core: LinuxPPS API ver. 1 registered
[    0.040296] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.040301] PTP clock support registered
[    0.040312] EDAC MC: Ver: 3.0.0
[    0.040743] NetLabel: Initializing
[    0.040746] NetLabel:  domain hash size = 128
[    0.040748] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.040775] NetLabel:  unlabeled traffic allowed by default
[    0.040942] clocksource: Switched to clocksource arch_sys_counter
[    0.073470] VFS: Disk quotas dquot_6.6.0
[    0.073501] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.073830] AppArmor: AppArmor Filesystem Enabled
[    0.076229] NET: Registered PF_INET protocol family
[    0.076413] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.078956] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.079018] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.079288] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.079578] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.081526] TCP: Hash tables configured (established 65536 bind 65536)
[    0.081731] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.081861] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.081962] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.082148] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.082169] NET: Registered PF_XDP protocol family
[    0.082179] PCI: CLS 0 bytes, default 64
[    0.082282] Trying to unpack rootfs image as initramfs...
[    0.082441] kvm [1]: IPA Size Limit: 40 bits
[    0.082493] kvm [1]: vgic interrupt IRQ9
[    0.082516] kvm [1]: VHE mode initialized successfully
[    0.083133] Initialise system trusted keyrings
[    0.083164] Key type blacklist registered
[    0.083264] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    0.083327] zbud: loaded
[    0.083973] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.096008] Key type asymmetric registered
[    0.096015] Asymmetric key parser 'x509' registered
[    0.096051] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.096152] io scheduler mq-deadline registered
[    0.096537] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 27)
[    0.096699] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 28)
[    0.096823] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 29)
[    0.096975] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 30)
[    0.097092] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 31)
[    0.097205] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 32)
[    0.099150] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes
[    0.099158] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840
[    0.099380] Console: switching to colour frame buffer device 240x67
[    0.101903] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered!
[    0.154852] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.156997] iproc-rng200 107d208000.rng: hwrng registered
[    0.157213] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[    0.158379] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[    0.162948] Freeing initrd memory: 20008K
[    0.163527] loop: module loaded
[    0.163770] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    0.164686] usbcore: registered new interface driver lan78xx
[    0.164697] usbcore: registered new interface driver smsc95xx
[    0.164709] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.164781] dwc_otg: FIQ enabled
[    0.164784] dwc_otg: NAK holdoff enabled
[    0.164786] dwc_otg: FIQ split-transaction FSM disabled
[    0.164790] Module dwc_common_port init
[    0.164923] mousedev: PS/2 mouse device common for all mice
[    0.164927] i2c_dev: i2c /dev entries driver
[    0.165632] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[    0.165635] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    0.168216] sdhci: Secure Digital Host Controller Interface driver
[    0.168220] sdhci: Copyright(c) Pierre Ossman
[    0.168359] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.168624] ledtrig-cpu: registered to indicate activity on CPUs
[    0.168675] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    0.168690] hid: raw HID events driver (C) Jiri Kosina
[    0.169211] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
[    0.169319] watchdog: Delayed init of the lockup detector failed: -19
[    0.169323] watchdog: Hard watchdog permanently disabled
[    0.169508] NET: Registered PF_INET6 protocol family
[    0.179268] Segment Routing with IPv6
[    0.179287] In-situ OAM (IOAM) with IPv6
[    0.179317] NET: Registered PF_PACKET protocol family
[    0.179364] Key type dns_resolver registered
[    0.182913] registered taskstats version 1
[    0.182998] Loading compiled-in X.509 certificates
[    0.183898] Loaded X.509 cert 'Build time autogenerated kernel key: b6dd0c1b0b1b09fd6a9bb03bfa2d3348cf73a9ec'
[    0.184713] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.185531] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.185535] blacklist: Loading compiled-in revocation X.509 certificates
[    0.185556] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    0.185577] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[    0.185596] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[    0.185614] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[    0.185632] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[    0.185651] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[    0.185668] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[    0.185684] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[    0.199885] zswap: loaded using pool zstd/z3fold
[    0.202887] Key type .fscrypt registered
[    0.202890] Key type fscrypt-provisioning registered
[    0.208365] Key type encrypted registered
[    0.208370] AppArmor: AppArmor sha1 policy hashing enabled
[    0.208380] ima: No TPM chip found, activating TPM-bypass!
[    0.208386] ima: Allocated hash algorithm: sha1
[    0.208396] ima: No architecture policies found
[    0.208415] evm: Initialising EVM extended attributes:
[    0.208417] evm: security.selinux
[    0.208419] evm: security.SMACK64
[    0.208421] evm: security.SMACK64EXEC
[    0.208423] evm: security.SMACK64TRANSMUTE
[    0.208425] evm: security.SMACK64MMAP
[    0.208427] evm: security.apparmor
[    0.208429] evm: security.ima
[    0.208431] evm: security.capability
[    0.208433] evm: HMAC attrs: 0x1
[    0.210027] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[    0.210376] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[    0.210380] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[    0.210385] platform 1000880000.pisp_be: Adding to iommu group 0
[    0.210413] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[    0.210419] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[    0.210882] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[    0.211160] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[    0.211163] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[    0.211172] platform axi:gpu: Adding to iommu group 1
[    0.211208] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[    0.211213] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[    0.211726] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[    0.212013] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[    0.213099] of_cfs_init
[    0.213139] of_cfs_init: OK
[    0.213241] clk: Disabling unused clocks
[    0.228150] Freeing unused kernel memory: 6144K
[    0.277126] Checked W+X mappings: passed, no W+X pages found
[    0.277137] Run /init as init process
[    0.277138]   with arguments:
[    0.277141]     /init
[    0.277142]     fixrtc
[    0.277144]     splash
[    0.277146]   with environment:
[    0.277147]     HOME=/
[    0.277149]     TERM=linux
[    0.277150]     multipath=off
[    0.485471] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges:
[    0.485481] brcm-pcie 1000110000.pcie:   No bus range found for /axi/pcie@110000, using [bus 00-ff]
[    0.485497] brcm-pcie 1000110000.pcie:      MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000
[    0.485506] brcm-pcie 1000110000.pcie:      MEM 0x1800000000..0x1affffffff -> 0x0400000000
[    0.485516] brcm-pcie 1000110000.pcie:   IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[    0.486636] brcm-pcie 1000110000.pcie: Forcing gen 2
[    0.486863] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00
[    0.486868] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.486872] pci_bus 0000:00: root bus resource [mem 0x1b00000000-0x1bfffffffb] (bus address [0x00000000-0xfffffffb])
[    0.486875] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1affffffff pref] (bus address [0x400000000-0x6ffffffff])
[    0.486890] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
[    0.486928] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.487632] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.490665] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.491671] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.492021] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.492126] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.492263] input: pwr_button as /devices/platform/pwr_button/input/input0
[    0.502717] dwc2 107c480000.usb: supply vusb_d not found, using dummy regulator
[    0.505223] dwc2 107c480000.usb: supply vusb_a not found, using dummy regulator
[    0.510707] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 40, base_baud = 6000000) is a 16550A
[    0.510822] serial serial0: tty port ttyS0 registered
[    0.520563] rpi-rtc soc:rpi_rtc: registered as rtc0
[    0.521930] rpi-rtc soc:rpi_rtc: setting system clock to 2024-01-15T17:39:32 UTC (1705340372)
[    0.544619] brcmstb-i2c 107d508200.i2c:  @200000hz registered in interrupt mode
[    0.575763] brcmstb-i2c 107d508280.i2c:  @200000hz registered in interrupt mode
[    0.720993] dwc2 107c480000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
[    0.721126] dwc2 107c480000.usb: DWC OTG Controller
[    0.721136] dwc2 107c480000.usb: new USB bus registered, assigned bus number 1
[    0.721151] dwc2 107c480000.usb: irq 41, io mem 0x107c480000
[    0.721231] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    0.721236] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.721240] usb usb1: Product: DWC OTG Controller
[    0.721244] usb usb1: Manufacturer: Linux 6.5.0-1008-raspi dwc2_hsotg
[    0.721247] usb usb1: SerialNumber: 107c480000.usb
[    0.721453] hub 1-0:1.0: USB hub found
[    0.721468] hub 1-0:1.0: 1 port detected
[    0.808954] raid6: neonx8   gen()  9640 MB/s
[    0.876949] raid6: neonx4   gen() 11527 MB/s
[    0.928944] brcm-pcie 1000110000.pcie: link down
[    0.929066] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.929075] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.929083] pci 0000:00:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
[    0.929226] pcieport 0000:00:00.0: PME: Signaling with IRQ 43
[    0.929777] pcieport 0000:00:00.0: AER: enabled with IRQ 43
[    0.929932] pci_bus 0000:01: busn_res: [bus 01] is released
[    0.930029] pci_bus 0000:00: busn_res: [bus 00-ff] is released
[    0.930329] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
[    0.930333] brcm-pcie 1000120000.pcie:   No bus range found for /axi/pcie@120000, using [bus 00-ff]
[    0.930349] brcm-pcie 1000120000.pcie:      MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[    0.930359] brcm-pcie 1000120000.pcie:      MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[    0.930373] brcm-pcie 1000120000.pcie:   IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[    0.930382] brcm-pcie 1000120000.pcie:   IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[    0.931610] brcm-pcie 1000120000.pcie: Forcing gen 2
[    0.931664] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00
[    0.931667] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.931671] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[    0.931674] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[    0.931688] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
[    0.931724] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.932392] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.944949] raid6: neonx2   gen()  9836 MB/s
[    1.012948] raid6: neonx1   gen()  7943 MB/s
[    1.040946] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[    1.040972] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000
[    1.040988] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
[    1.040996] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
[    1.041003] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
[    1.041080] pci 0000:01:00.0: supports D1
[    1.041082] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    1.052954] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.052963] pci 0000:00:00.0: BAR 14: assigned [mem 0x1f00000000-0x1f005fffff]
[    1.052966] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
[    1.052971] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
[    1.052976] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
[    1.052980] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.052983] pci 0000:00:00.0:   bridge window [mem 0x1f00000000-0x1f005fffff]
[    1.052989] pci 0000:00:00.0: Max Payload Size set to  256/ 512 (was  128), Max Read Rq  512
[    1.052997] pci 0000:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  512
[    1.053089] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    1.053130] pcieport 0000:00:00.0: PME: Signaling with IRQ 44
[    1.053211] pcieport 0000:00:00.0: AER: enabled with IRQ 44
[    1.053324] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[    1.053328] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[    1.053334] rp1 0000:01:00.0: enabling device (0000 -> 0002)
[    1.054145] rp1 0000:01:00.0: chip_id 0x20001927
[    1.059850] sdhci-brcmstb 1000fff000.mmc: there is not valid maps for state default
[    1.060533] mmc0: CQHCI version 5.10
[    1.061312] sdhci-brcmstb 1001100000.mmc: invalid resource (null)
[    1.061332] sdhci-brcmstb 1001100000.mmc: invalid resource (null)
[    1.061418] mmc1: CQHCI version 5.10
[    1.080953] raid6: int64x8  gen()  5594 MB/s
[    1.096845] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[    1.148951] raid6: int64x4  gen()  5889 MB/s
[    1.216948] raid6: int64x2  gen()  4923 MB/s
[    1.259487] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[    1.281097] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 112 (d8:3a:dd:a1:92:cc)
[    1.283406] xhci-hcd xhci-hcd.0: xHCI Host Controller
[    1.283417] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[    1.283859] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000000810
[    1.283876] xhci-hcd xhci-hcd.0: irq 137, io mem 0x1f00200000
[    1.283963] xhci-hcd xhci-hcd.0: xHCI Host Controller
[    1.283966] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 3
[    1.283969] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[    1.284951] raid6: int64x1  gen()  4057 MB/s
[    1.284957] raid6: using algorithm neonx4 gen() 11527 MB/s
[    1.285013] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    1.285017] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.285020] usb usb2: Product: xHCI Host Controller
[    1.285022] usb usb2: Manufacturer: Linux 6.5.0-1008-raspi xhci-hcd
[    1.285024] usb usb2: SerialNumber: xhci-hcd.0
[    1.286463] hub 2-0:1.0: USB hub found
[    1.286481] hub 2-0:1.0: 2 ports detected
[    1.286671] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    1.286675] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.286677] usb usb3: Product: xHCI Host Controller
[    1.286679] usb usb3: Manufacturer: Linux 6.5.0-1008-raspi xhci-hcd
[    1.286681] usb usb3: SerialNumber: xhci-hcd.0
[    1.288805] hub 3-0:1.0: USB hub found
[    1.288816] hub 3-0:1.0: 1 port detected
[    1.288962] xhci-hcd xhci-hcd.1: xHCI Host Controller
[    1.288968] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[    1.289409] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000000810
[    1.289424] xhci-hcd xhci-hcd.1: irq 142, io mem 0x1f00300000
[    1.289505] xhci-hcd xhci-hcd.1: xHCI Host Controller
[    1.289509] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 5
[    1.289512] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[    1.290213] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    1.290218] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.290220] usb usb4: Product: xHCI Host Controller
[    1.290222] usb usb4: Manufacturer: Linux 6.5.0-1008-raspi xhci-hcd
[    1.290224] usb usb4: SerialNumber: xhci-hcd.1
[    1.290419] hub 4-0:1.0: USB hub found
[    1.290432] hub 4-0:1.0: 2 ports detected
[    1.290607] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    1.290610] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.290613] usb usb5: Product: xHCI Host Controller
[    1.290615] usb usb5: Manufacturer: Linux 6.5.0-1008-raspi xhci-hcd
[    1.290617] usb usb5: SerialNumber: xhci-hcd.1
[    1.290730] hub 5-0:1.0: USB hub found
[    1.290739] hub 5-0:1.0: 1 port detected
[    1.294301] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[    1.332566] mmc0: new ultra high speed SDR104 SDXC card at address aaaa
[    1.332861] mmcblk0: mmc0:aaaa SC200 183 GiB
[    1.335070]  mmcblk0: p1 p2
[    1.335166] mmcblk0: mmc0:aaaa SC200 183 GiB (quirks 0x00004000)
[    1.352940] raid6: .... xor() 8736 MB/s, rmw enabled
[    1.352944] raid6: using neon recovery algorithm
[    1.354929] xor: measuring software checksum speed
[    1.355554]    8regs           : 15892 MB/sec
[    1.356180]    32regs          : 15779 MB/sec
[    1.357059]    arm64_neon      : 11355 MB/sec
[    1.357062] xor: using function: 8regs (15892 MB/sec)
[    1.398914] Btrfs loaded, zoned=yes, fsverity=no
[    1.544953] usb 4-2: new low-speed USB device number 2 using xhci-hcd
[    1.544975] usb 2-2: new full-speed USB device number 2 using xhci-hcd
[    1.695461] usb 2-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[    1.695469] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.695473] usb 2-2: Product: USB Receiver
[    1.695476] usb 2-2: Manufacturer: Logitech
[    1.709936] usb 4-2: New USB device found, idVendor=04f2, idProduct=0402, bcdDevice= 1.65
[    1.709943] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.709946] usb 4-2: Product: USB Keyboard
[    1.709949] usb 4-2: Manufacturer: Chicony
[    1.761848] usbcore: registered new interface driver usbhid
[    1.761854] usbhid: USB HID core driver
[    1.767405] input: Logitech USB Receiver as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.0/0003:046D:C52B.0001/input/input1
[    1.787432] EXT4-fs (mmcblk0p2): mounted filesystem 4106d6da-14ec-4cc5-a35b-62796617f5f4 ro with ordered data mode. Quota mode: none.
[    1.825094] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0-2/input0
[    1.828038] input: Logitech USB Receiver Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.1/0003:046D:C52B.0002/input/input2
[    1.828130] input: Logitech USB Receiver Consumer Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.1/0003:046D:C52B.0002/input/input3
[    1.885198] input: Logitech USB Receiver System Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.1/0003:046D:C52B.0002/input/input4
[    1.885366] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0-2/input1
[    1.885683] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.0-2/input2
[    1.889652] input: Chicony USB Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb4/4-2/4-2:1.0/0003:04F2:0402.0004/input/input6
[    1.949063] hid-generic 0003:04F2:0402.0004: input,hidraw3: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-xhci-hcd.1-2/input0
[    1.953546] input: Chicony USB Keyboard System Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb4/4-2/4-2:1.1/0003:04F2:0402.0005/input/input7
[    2.013043] input: Chicony USB Keyboard Consumer Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb4/4-2/4-2:1.1/0003:04F2:0402.0005/input/input8
[    2.013158] hid-generic 0003:04F2:0402.0005: input,hiddev2,hidraw4: USB HID v1.11 Device [Chicony USB Keyboard] on usb-xhci-hcd.1-2/input1
[    2.127209] systemd[1]: Inserted module 'autofs4'
[    2.176514] systemd[1]: systemd 253.5-1ubuntu6.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    2.176526] systemd[1]: Detected architecture arm64.
[    2.181204] systemd[1]: Hostname set to <claudiuspi5-desktop>.
[    2.213359] systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[    2.530087] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[    2.653009] systemd[1]: Queued start job for default target graphical.target.
[    2.690313] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    2.691075] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[    2.691499] systemd[1]: Created slice user.slice - User and Session Slice.
[    2.691633] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[    2.692023] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    2.692126] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[    2.692195] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[    2.692218] systemd[1]: Reached target slices.target - Slice Units.
[    2.692249] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
[    2.692292] systemd[1]: Reached target time-set.target - System Time Set.
[    2.692371] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[    2.692732] systemd[1]: Listening on syslog.socket - Syslog Socket.
[    2.692956] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[    2.693063] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[    2.695064] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    2.695345] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[    2.695724] systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
[    2.696034] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    2.696248] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    2.698216] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[    2.700046] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[    2.702045] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[    2.704028] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[    2.707038] systemd[1]: Starting systemd-journald.service - Journal Service...
[    2.709246] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[    2.711052] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    2.712862] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[    2.715392] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[    2.717670] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[    2.720096] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[    2.722477] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[    2.724789] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[    2.725222] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[    2.735013] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    2.735112] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[    2.737077] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[    2.738891] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[    2.741227] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[    2.741418] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[    2.741561] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[    2.741703] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[    2.742073] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[    2.742586] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    2.742830] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[    2.743225] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    2.743417] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[    2.743845] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    2.744082] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[    2.745114] systemd-journald[244]: Collecting audit messages is disabled.
[    2.745975] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[    2.748919] fuse: init (API version 7.38)
[    2.751413] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    2.751728] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[    2.752331] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[    2.754276] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[    2.758581] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[    2.762099] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[    2.764437] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    2.764462] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[    2.764681] EXT4-fs (mmcblk0p2): re-mounted 4106d6da-14ec-4cc5-a35b-62796617f5f4 r/w. Quota mode: none.
[    2.766055] device-mapper: uevent: version 1.0.3
[    2.766231] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    2.770099] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    2.770356] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[    2.770909] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[    2.771169] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[    2.771219] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[    2.774773] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[    2.774955] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[    2.777113] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[    2.787037] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    2.787519] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[    2.803091] systemd[1]: Started systemd-journald.service - Journal Service.
[    2.830955] systemd-journald[244]: Received client request to flush runtime journal.
[    2.848038] systemd-journald[244]: File /var/log/journal/f1cbb61c9a43407db0da4582ef4f3e42/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    3.562604] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[    3.562696] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[    3.562762] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[    3.562795] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[    3.562851] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[    3.562881] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[    3.562930] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[    3.562987] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[    3.563142] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[    3.563180] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[    3.571757] mc: Linux media interface: v0.10
[    3.607426] videodev: Linux video capture interface: v2.00
[    3.617587] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0
[    3.668489] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[    3.668653] pispbe 1000880000.pisp_be: pispbe_probe: HW version:  0x02252700
[    3.668657] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000
[    3.668659] pispbe 1000880000.pisp_be: pispbe_probe: Status:      0x00000000
[    3.668662] pispbe 1000880000.pisp_be: Register nodes for group 0
[    3.668894] pispbe 1000880000.pisp_be: input device node registered as /dev/video20
[    3.671563] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video21
[    3.672401] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video22
[    3.674207] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video23
[    3.674926] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video24
[    3.675928] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video25
[    3.678823] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video26
[    3.678935] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video27
[    3.678989] pispbe 1000880000.pisp_be: config device node registered as /dev/video28
[    3.679347] pispbe 1000880000.pisp_be: Register nodes for group 1
[    3.679426] pispbe 1000880000.pisp_be: input device node registered as /dev/video29
[    3.679469] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video30
[    3.679520] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video31
[    3.679572] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video32
[    3.679621] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video33
[    3.679667] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video34
[    3.679707] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video35
[    3.679746] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video36
[    3.679787] pispbe 1000880000.pisp_be: config device node registered as /dev/video37
[    3.681611] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[    3.681619] rpivid_hevc: module verification failed: signature and/or required key missing - tainting kernel
[    3.688929] rpivid 1000800000.codec: Device registered as /dev/video19
[    3.776182] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.0-2/input2
[    3.791859] loop0: detected capacity change from 0 to 8
[    3.796896] loop1: detected capacity change from 0 to 141464
[    3.804735] loop2: detected capacity change from 0 to 140352
[    3.808056] loop3: detected capacity change from 0 to 464232
[    3.814033] loop4: detected capacity change from 0 to 972976
[    3.820916] loop5: detected capacity change from 0 to 187776
[    3.833826] loop6: detected capacity change from 0 to 19440
[    3.838300] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.845035] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    3.845298] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    3.845519] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.852856] Bluetooth: Core ver 2.22
[    3.854012] loop7: detected capacity change from 0 to 72736
[    3.855415] NET: Registered PF_BLUETOOTH protocol family
[    3.855424] Bluetooth: HCI device and connection manager initialized
[    3.855433] Bluetooth: HCI socket layer initialized
[    3.855436] Bluetooth: L2CAP socket layer initialized
[    3.855453] Bluetooth: SCO socket layer initialized
[    3.863678] loop8: detected capacity change from 0 to 72112
[    3.871236] loop9: detected capacity change from 0 to 832
[    3.895156] Bluetooth: HCI UART driver ver 2.3
[    3.895166] Bluetooth: HCI UART protocol H4 registered
[    3.895168] Bluetooth: HCI UART protocol BCSP registered
[    3.895412] input: Logitech Wireless Device PID:4082 Keyboard as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/0003:046D:4082.0006/input/input10
[    3.895650] input: Logitech Wireless Device PID:4082 Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/0003:046D:4082.0006/input/input11
[    3.895797] hid-generic 0003:046D:4082.0006: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4082] on usb-xhci-hcd.0-2/input2:1
[    3.895835] Bluetooth: HCI UART protocol LL registered
[    3.895838] Bluetooth: HCI UART protocol ATH3K registered
[    3.895856] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    3.895968] Bluetooth: HCI UART protocol Intel registered
[    3.896088] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[    3.896190] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[    3.896458] input: Logitech Wireless Device PID:4082 Keyboard as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/0003:046D:4082.0007/input/input15
[    3.896718] input: Logitech Wireless Device PID:4082 Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/0003:046D:4082.0007/input/input16
[    3.898119] Bluetooth: HCI UART protocol Broadcom registered
[    3.898155] Bluetooth: HCI UART protocol QCA registered
[    3.898157] Bluetooth: HCI UART protocol AG6XX registered
[    3.903018] Bluetooth: HCI UART protocol Marvell registered
[    3.904664] brcmfmac: F1 signature read @0x18000000=0x15264345
[    3.908544] hid-generic 0003:046D:4082.0007: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4082] on usb-xhci-hcd.0-2/input2:2
[    3.911767] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    3.912433] usbcore: registered new interface driver brcmfmac
[    3.931126] input: Logitech Wireless Device PID:408a Keyboard as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/0003:046D:408A.0008/input/input20
[    3.934022] input: Logitech Wireless Device PID:408a Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/0003:046D:408A.0008/input/input21
[    3.934162] hid-generic 0003:046D:408A.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Device PID:408a] on usb-xhci-hcd.0-2/input2:3
[    4.006335] Adding 1048572k swap on /swapfile.  Priority:-2 extents:4 across:2719744k SSFS
[    4.072742] audit: type=1400 audit(1705340375.615:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/brave.com/brave/brave" pid=509 comm="apparmor_parser"
[    4.072809] audit: type=1400 audit(1705340375.615:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/bin/toybox" pid=506 comm="apparmor_parser"
[    4.080188] audit: type=1400 audit(1705340375.623:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=508 comm="apparmor_parser"
[    4.080209] audit: type=1400 audit(1705340375.623:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=508 comm="apparmor_parser"
[    4.080469] audit: type=1400 audit(1705340375.623:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/google/chrome/chrome" pid=510 comm="apparmor_parser"
[    4.081872] audit: type=1400 audit(1705340375.627:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/microsoft/msedge/msedge" pid=511 comm="apparmor_parser"
[    4.082398] audit: type=1400 audit(1705340375.627:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=507 comm="apparmor_parser"
[    4.083833] audit: type=1400 audit(1705340375.627:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/vivaldi/vivaldi-bin" pid=512 comm="apparmor_parser"
[    4.086206] audit: type=1400 audit(1705340375.631:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/buildah" pid=514 comm="apparmor_parser"
[    4.134383] brcmfmac_wcc: brcmf_wcc_attach: executing
[    4.141887] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[    4.142270] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov  1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[    4.162280] input: Logitech MX Master 3 as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/0003:046D:4082.0006/input/input25
[    4.162868] logitech-hidpp-device 0003:046D:4082.0006: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Master 3] on usb-xhci-hcd.0-2/input2:1
[    4.253643] Bluetooth: hci0: BCM: chip id 107
[    4.253870] Bluetooth: hci0: BCM: features 0x2f
[    4.255255] Bluetooth: hci0: BCM4345C0
[    4.255261] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[    4.258188] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[    4.259112] Console: switching to colour dummy device 80x25
[    4.259953] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.hcd' Patch
[    4.261505] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[    4.263076] Registered IR keymap rc-cec
[    4.263323] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0
[    4.263448] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input26
[    4.326778] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
[    4.328390] Registered IR keymap rc-cec
[    4.328440] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1
[    4.328513] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input27
[    4.366812] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
[    4.366988] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
[    4.367092] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
[    4.367178] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
[    4.367256] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
[    4.372243] input: Logitech MX Master 3 as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/0003:046D:4082.0007/input/input28
[    4.372575] logitech-hidpp-device 0003:046D:4082.0007: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Master 3] on usb-xhci-hcd.0-2/input2:2
[    4.412237] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1
[    4.470148] Console: switching to colour frame buffer device 240x67
[    4.487756] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device
[    4.616303] input: Logitech MX Keys as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/0003:046D:408A.0008/input/input29
[    4.616612] logitech-hidpp-device 0003:046D:408A.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech MX Keys] on usb-xhci-hcd.0-2/input2:3
[    4.949644] Bluetooth: hci0: BCM: features 0x2f
[    4.950980] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[    4.950984] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[    4.951282] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
[    5.331803] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.331811] Bluetooth: BNEP filters: protocol multicast
[    5.331819] Bluetooth: BNEP socket layer initialized
[    5.341478] Bluetooth: MGMT ver 1.22
[    5.354962] NET: Registered PF_ALG protocol family
[    6.830555] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[    6.830567] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
[    6.833213] pps pps0: new PPS source ptp0
[    6.834008] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[    7.000464] loop10: detected capacity change from 0 to 8
[    7.207932] kauditd_printk_skb: 96 callbacks suppressed
[    7.207938] audit: type=1400 audit(1705340378.751:107): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=927 comm="cupsd" capability=12  capname="net_admin"
[    9.082986] audit: type=1400 audit(1705340380.627:108): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/20674/usr/lib/snapd/snap-confine" pid=1024 comm="snap-confine" capability=12  capname="net_admin"
[    9.083032] audit: type=1400 audit(1705340380.627:109): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/20674/usr/lib/snapd/snap-confine" pid=1024 comm="snap-confine" capability=38  capname="perfmon"
[    9.691776] Bluetooth: RFCOMM TTY layer initialized
[    9.691796] Bluetooth: RFCOMM socket layer initialized
[    9.691810] Bluetooth: RFCOMM ver 1.11
[    9.816678] warning: `MediaServerProc' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[   14.565932] platform 1f00050000.spi: deferred probe pending
[   15.074019] rfkill: input handler disabled
[   15.826584] logitech-hidpp-device 0003:046D:4082.0006: HID++ 4.5 device connected.
[   20.992589] systemd-journald[244]: File /var/log/journal/f1cbb61c9a43407db0da4582ef4f3e42/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   21.449001] rfkill: input handler enabled
[   24.025452] rfkill: input handler disabled
[   25.353908] audit: type=1400 audit(1705340396.899:110): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/20674/usr/lib/snapd/snap-confine" pid=2469 comm="snap-confine" capability=12  capname="net_admin"
[   25.353965] audit: type=1400 audit(1705340396.899:111): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/20674/usr/lib/snapd/snap-confine" pid=2469 comm="snap-confine" capability=38  capname="perfmon"

kamirha

(Themenstarter)

Anmeldungsdatum:
12. Januar 2024

Beiträge: 5

kB schrieb:

kamirha schrieb:

[…] Dann brauche ich gefühlt wieder 20 Neustarts bis sie irgendwann wieder auftaucht.

Wenn etwas sporadisch verfügbar ist und dann wieder nicht, liegt das oft an der Stromversorgung. Besonders beim RPi.

Hmm. Auxch wenn es unter piOS ohne Probleme funktioniert?

Antworten |