ubuntuusers.de

Hallo Ubunux,

die Suche nach "r815" ergab gar nichts.

Die Ausgabe von der Firmware:

johnny@MATERUS17YE5:~$ ls -l /lib/firmware/rtl_nic
insgesamt 148
-rw-r--r-- 1 root root  2076 Jan 30 11:04 rtl8105e-1.fw
-rw-r--r-- 1 root root  1856 Jan 30 11:04 rtl8106e-1.fw
-rw-r--r-- 1 root root   832 Jan 30 11:04 rtl8106e-2.fw
-rw-r--r-- 1 root root   992 Jan 30 11:04 rtl8107e-1.fw
-rw-r--r-- 1 root root   976 Jan 30 11:04 rtl8107e-2.fw
-rw-r--r-- 1 root root  3456 Jan 30 11:04 rtl8125a-3.fw
-rw-r--r-- 1 root root 10128 Jan 30 11:04 rtl8125b-1.fw
-rw-r--r-- 1 root root  3328 Jan 30 11:04 rtl8125b-2.fw
-rw-r--r-- 1 root root  1768 Jan 30 11:04 rtl8153a-2.fw
-rw-r--r-- 1 root root  1440 Jan 30 11:04 rtl8153a-3.fw
-rw-r--r-- 1 root root   712 Jan 30 11:04 rtl8153a-4.fw
-rw-r--r-- 1 root root  1880 Jan 30 11:04 rtl8153b-2.fw
-rw-r--r-- 1 root root   832 Jan 30 11:04 rtl8153c-1.fw
-rw-r--r-- 1 root root  4024 Jan 30 11:04 rtl8156a-2.fw
-rw-r--r-- 1 root root  7256 Jan 30 11:04 rtl8156b-2.fw
-rw-r--r-- 1 root root  1492 Jan 30 11:04 rtl8168d-1.fw
-rw-r--r-- 1 root root  1324 Jan 30 11:04 rtl8168d-2.fw
-rw-r--r-- 1 root root  5500 Jan 30 11:04 rtl8168e-1.fw
-rw-r--r-- 1 root root  3920 Jan 30 11:04 rtl8168e-2.fw
-rw-r--r-- 1 root root  3872 Jan 30 11:04 rtl8168e-3.fw
-rw-r--r-- 1 root root  3424 Jan 30 11:04 rtl8168f-1.fw
-rw-r--r-- 1 root root  1232 Jan 30 11:04 rtl8168f-2.fw
-rw-r--r-- 1 root root   336 Jan 30 11:04 rtl8168fp-3.fw
-rw-r--r-- 1 root root  4304 Jan 30 11:04 rtl8168g-1.fw
-rw-r--r-- 1 root root  4896 Jan 30 11:04 rtl8168g-2.fw
-rw-r--r-- 1 root root   832 Jan 30 11:04 rtl8168g-3.fw
-rw-r--r-- 1 root root   992 Jan 30 11:04 rtl8168h-1.fw
-rw-r--r-- 1 root root   976 Jan 30 11:04 rtl8168h-2.fw
-rw-r--r-- 1 root root  1824 Jan 30 11:04 rtl8402-1.fw
-rw-r--r-- 1 root root  2112 Jan 30 11:04 rtl8411-1.fw
-rw-r--r-- 1 root root  1040 Jan 30 11:04 rtl8411-2.fw

Bekommst du denn jetzt mit ethtool eine Ausgabe? Dann würde ich versuchen mit ethtool die Geschwindigkeit zu ändern.

Das wäre zu einfach 😉

Ausgabe ethtool:

johnny@MATERUS17YE5:~$ ethtool enxc0eac3622707
Settings for enxc0eac3622707:
	Supported ports: [  ]
	Supported link modes:   Not reported
	Supported pause frame use: No
	Supports auto-negotiation: No
	Supported FEC modes: Not reported
	Advertised link modes:  Not reported
	Advertised pause frame use: No
	Advertised auto-negotiation: No
	Advertised FEC modes: Not reported
	Speed: 100Mb/s
	Duplex: Half
	Auto-negotiation: off
	Port: Twisted Pair
	PHYAD: 0
	Transceiver: internal
	MDI-X: Unknown
netlink error: Operation not permitted
        Current message level: 0x00000007 (7)
                               drv probe link
	Link detected: yes

Speed setzen mittels ethtool:

johnny@MATERUS17YE5:~$ sudo ethtool -s enxc0eac3622707 speed 1000 duplex full
netlink error: Operation not supported

☹