Vor 10 Jahren war das Modul rtl8192cu fehlerhaft, es wäre dann für die Allgemeinheit schon gut zu wissen, ob das immer noch so ist.
Edimax AX1800 Treiber Installation
![]() Anmeldungsdatum: Beiträge: 17165 |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 157 |
@von.wert Wenn es geht der Edimax AX1800, da dieser mehr Funktionen/Geschwindigkeit bietet. |
![]() Anmeldungsdatum: Beiträge: 4652 |
Nur den Namen des Kernelmoduls in /etc/modules eintragen, im Fall von brcmsmac einfach nur: brcmsmac Pro Zeile ein Modulname, wenn es mehrere sind. Lm sensors trägt in /etc/modules zum Beispiel auch die Module für die Temperaturüberwachung der Hardware ein. |
![]() Anmeldungsdatum: Beiträge: 17165 |
Dann zeige doch mal den Status nach dem blacklisten und Neustart, was wichtig ist steht im bereits verlinkten Sticky. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 157 |
So, das mit der Broadcom ist wie es aussieht gelöst. Hab den Fehler entdeckt. Das besagte Module war geblacklist. sudo rm /etc/modprobe.d/broadcom-sta-dkms.conf Deshalb ist es nicht automatisch geladen worden. https://wiki.ubuntuusers.de/WLAN/Karten/Broadcom/ Der Proprietäre Treiber unter Zusätzliche Treiber ist nun auch wieder entfernt. Obwohl dieser vorher auch nicht vorhanden war. Vielleicht ein Überbleibsel aus der Vergangenheit. Ich poste nochmal die neuen Ausgaben der Befehle, da jetzt nur noch der AX1800 dran steckt und nicht mehr der genannte kleine Edimax Stick.
Das zeigte gerade nur ne Ausgabe als der kleine Edimax Stick eingesteckt wurde. Mache noch nen Reboot wo dann nur der AX1800 und die interne Broadcom dran ist ohne den kleinen. Dann gibt es die neue Ausgabe der Befehle. |
![]() Anmeldungsdatum: Beiträge: 17165 |
Wenn es um einen Edimax AX1800 geht, dann steckt man beliebige andere WLAN-Sticks an und zeigt dann diese Ausgabe, verwirrender kann man es nicht machen ... 😈 |
(Themenstarter)
Anmeldungsdatum: Beiträge: 157 |
So nachdem Reboot und mit eingesteckten AX1800 und interner Broadcom. ~$ journalctl -b | grep rtl8192 ~$ Keine Ausgabe. rtl8192, nicht geblacklistet. ~$ ls -la /etc/modprobe.d/ insgesamt 48 drwxr-xr-x 1 root root 490 Feb 10 12:59 . drwxr-xr-x 1 root root 4536 Feb 10 13:55 .. -rw-r--r-- 1 root root 2507 Feb 22 2021 alsa-base.conf -rw-r--r-- 1 root root 154 Aug 23 2022 amd64-microcode-blacklist.conf -rw-r--r-- 1 root root 325 Feb 15 2023 blacklist-ath_pci.conf -rw-r--r-- 1 root root 1518 Feb 15 2023 blacklist.conf -rw-r--r-- 1 root root 210 Feb 15 2023 blacklist-firewire.conf -rw-r--r-- 1 root root 677 Feb 15 2023 blacklist-framebuffer.conf -rw-r--r-- 1 root root 156 Feb 22 2021 blacklist-modem.conf lrwxrwxrwx 1 root root 41 Mai 1 2023 blacklist-oss.conf -> /lib/linux-sound-base/noOSS.modprobe.conf -rw-r--r-- 1 root root 583 Feb 15 2023 blacklist-rare-network.conf -rw-r--r-- 1 root root 127 Jan 31 2023 dkms.conf -rw-r--r-- 1 root root 154 Feb 20 2023 intel-microcode-blacklist.conf -rw-r--r-- 1 root root 347 Feb 15 2023 iwlwifi.conf $ uname -a Linux NB-Name 6.5.0-17-generic #17-Ubuntu SMP PREEMPT_DYNAMIC Thu Jan 11 14:01:59 UTC 2024 x86_64 x86_64 x86_64 GNU/Linux $ lspci -nnk -d::0280 # für Funkgeräte 02:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01) Subsystem: Broadcom Inc. and subsidiaries BCM4313 802.11bgn Wireless Network Adapter [14e4:0608] Kernel driver in use: bcma-pci-bridge Kernel modules: bcma $ lsusb -v -t /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M ID 1d6b:0003 Linux Foundation 3.0 root hub /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M ID 1d6b:0002 Linux Foundation 2.0 root hub |__ Port 3: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M ID 046d:c045 Logitech, Inc. Optical Mouse |__ Port 4: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 480M ID 7392:6822 Edimax Technology Co., Ltd /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/3p, 480M ID 1d6b:0002 Linux Foundation 2.0 root hub |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M ID 8087:0024 Intel Corp. Integrated Rate Matching Hub |__ Port 6: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M ID 058f:6366 Alcor Micro Corp. Multi Flash Reader /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/3p, 480M ID 1d6b:0002 Linux Foundation 2.0 root hub |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M ID 8087:0024 Intel Corp. Integrated Rate Matching Hub |__ Port 4: Dev 3, If 0, Class=Vendor Specific Class, Driver=btusb, 12M ID 0a5c:21f4 Broadcom Corp. |__ Port 4: Dev 3, If 1, Class=Vendor Specific Class, Driver=btusb, 12M ID 0a5c:21f4 Broadcom Corp. |__ Port 4: Dev 3, If 2, Class=Vendor Specific Class, Driver=btusb, 12M ID 0a5c:21f4 Broadcom Corp. |__ Port 4: Dev 3, If 3, Class=Application Specific Interface, Driver=, 12M ID 0a5c:21f4 Broadcom Corp. |__ Port 5: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M ID 04f2:b2fa Chicony Electronics Co., Ltd |__ Port 5: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M ID 04f2:b2fa Chicony Electronics Co., Ltd $ rfkill list 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lsmod Module Size Used by rfcomm 98304 4 snd_seq_dummy 12288 0 snd_hrtimer 12288 1 nls_utf8 12288 6 cifs 1409024 6 cifs_arc4 12288 1 cifs cifs_md4 12288 1 cifs fscache 389120 1 cifs netfs 61440 2 cifs,fscache ccm 20480 9 cmac 12288 4 algif_hash 12288 1 algif_skcipher 12288 1 af_alg 32768 6 algif_hash,algif_skcipher bnep 32768 2 brcmsmac 798720 0 brcmutil 24576 1 brcmsmac b43 577536 0 intel_rapl_msr 20480 0 intel_rapl_common 36864 1 intel_rapl_msr x86_pkg_temp_thermal 20480 0 intel_powerclamp 24576 0 cordic 12288 2 b43,brcmsmac coretemp 24576 0 sunrpc 811008 1 kvm_intel 487424 0 snd_hda_codec_hdmi 94208 1 binfmt_misc 24576 1 snd_ctl_led 24576 0 uvcvideo 135168 0 mac80211 1724416 2 b43,brcmsmac kvm 1404928 1 kvm_intel btusb 73728 0 btrtl 32768 1 btusb btbcm 24576 1 btusb videobuf2_vmalloc 20480 1 uvcvideo irqbypass 12288 1 kvm uvc 12288 1 uvcvideo crct10dif_pclmul 12288 1 snd_hda_codec_realtek 192512 1 btintel 53248 1 btusb polyval_clmulni 12288 0 videobuf2_memops 16384 1 videobuf2_vmalloc polyval_generic 12288 1 polyval_clmulni snd_hda_codec_generic 122880 1 snd_hda_codec_realtek videobuf2_v4l2 40960 1 uvcvideo snd_hda_intel 61440 1 btmtk 12288 1 btusb ghash_clmulni_intel 16384 0 snd_intel_dspcfg 32768 1 snd_hda_intel nls_iso8859_1 12288 1 cfg80211 1318912 3 b43,mac80211,brcmsmac videodev 360448 2 videobuf2_v4l2,uvcvideo bluetooth 1073152 34 btrtl,btmtk,btintel,btbcm,bnep,btusb,rfcomm snd_intel_sdw_acpi 16384 1 snd_intel_dspcfg cryptd 24576 1 ghash_clmulni_intel snd_hda_codec 212992 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek videobuf2_common 86016 4 videobuf2_vmalloc,videobuf2_v4l2,uvcvideo,videobuf2_memops libarc4 12288 1 mac80211 ecdh_generic 16384 2 bluetooth rapl 20480 0 snd_hda_core 147456 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek ecc 45056 1 ecdh_generic at24 24576 0 mei_pxp 16384 0 mei_hdcp 28672 0 ssb 102400 1 b43 mc 86016 4 videodev,videobuf2_v4l2,uvcvideo,videobuf2_common intel_cstate 20480 0 snd_hwdep 20480 1 snd_hda_codec snd_pcm 196608 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core i915 4145152 20 think_lmi 45056 0 firmware_attributes_class 12288 1 think_lmi snd_seq_midi 24576 0 snd_seq_midi_event 16384 1 snd_seq_midi wmi_bmof 12288 0 i2c_i801 36864 0 snd_rawmidi 57344 1 snd_seq_midi drm_buddy 20480 1 i915 snd_seq 118784 9 snd_seq_midi,snd_seq_midi_event,snd_seq_dummy ttm 110592 1 i915 thinkpad_acpi 159744 0 i2c_smbus 16384 1 i2c_i801 drm_display_helper 241664 1 i915 nvram 16384 1 thinkpad_acpi snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi cec 94208 2 drm_display_helper,i915 snd_timer 49152 3 snd_seq,snd_hrtimer,snd_pcm rc_core 77824 1 cec drm_kms_helper 270336 2 drm_display_helper,i915 mei_me 53248 2 snd 143360 17 snd_ctl_led,snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,thinkpad_acpi,snd_pcm,snd_rawmidi bcma 86016 2 b43,brcmsmac lpc_ich 32768 0 soundcore 16384 2 snd_ctl_led,snd ledtrig_audio 12288 3 snd_ctl_led,snd_hda_codec_generic,thinkpad_acpi mei 167936 5 mei_hdcp,mei_pxp,mei_me i2c_algo_bit 16384 1 i915 platform_profile 12288 1 thinkpad_acpi joydev 32768 0 input_leds 12288 0 mac_hid 12288 0 serio_raw 20480 0 msr 12288 0 parport_pc 53248 0 ppdev 24576 0 lp 28672 0 parport 77824 3 parport_pc,lp,ppdev drm 761856 13 drm_kms_helper,drm_display_helper,drm_buddy,thinkpad_acpi,i915,ttm efi_pstore 12288 0 dmi_sysfs 20480 0 ip_tables 36864 0 x_tables 69632 1 ip_tables autofs4 57344 2 btrfs 1945600 2 blake2b_generic 24576 0 xor 20480 1 btrfs raid6_pq 126976 1 btrfs libcrc32c 12288 1 btrfs hid_generic 12288 0 usbhid 77824 0 hid 180224 2 usbhid,hid_generic uas 28672 0 usb_storage 86016 1 uas crc32_pclmul 12288 0 video 73728 2 thinkpad_acpi,i915 psmouse 212992 0 r8169 114688 0 xhci_pci 24576 0 ahci 49152 3 realtek 36864 1 libahci 57344 1 ahci xhci_pci_renesas 20480 1 xhci_pci wmi 40960 3 video,wmi_bmof,think_lmi Vielen Dank an alle! Viele Liebe Grüße Revan335 |
(Themenstarter)
Anmeldungsdatum: Beiträge: 157 |
Deshalb der Hinweis am Anfang das dieser steckt. Kenne das genaue Modell von dem nicht. Deshalb die Umschreibung. Darüber ging das Internet, da zu dem Zeitpunkt die Broadcom ja noch nicht ging.
Entschuldigt die Verwirrung! 😢 |
![]() Anmeldungsdatum: Beiträge: 17165 |
Das könnte passen, jedenfalls wird dort die USB-ID angegeben: https://github.com/morrownr/rtl8852bu/tree/1.19.3 Dort gibt es viel zu lesen für dich. Bearbeitet von kB: Externen Link formatiert. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 157 |
$ sudo dkms status rtl8852bu/1.19.3, 6.5.0-17-generic, x86_64: installed Müsste es dann nicht auch hier auftauchen? $ lsmod Module Size Used by rfcomm 98304 4 snd_seq_dummy 12288 0 snd_hrtimer 12288 1 nls_utf8 12288 5 cifs 1409024 6 cifs_arc4 12288 1 cifs cifs_md4 12288 1 cifs fscache 389120 1 cifs netfs 61440 2 cifs,fscache ccm 20480 9 cmac 12288 4 algif_hash 12288 1 algif_skcipher 12288 1 af_alg 32768 6 algif_hash,algif_skcipher bnep 32768 2 snd_hda_codec_hdmi 94208 1 snd_ctl_led 24576 0 snd_hda_codec_realtek 192512 1 snd_hda_codec_generic 122880 1 snd_hda_codec_realtek uvcvideo 135168 0 videobuf2_vmalloc 20480 1 uvcvideo btusb 73728 0 brcmsmac 798720 0 uvc 12288 1 uvcvideo btrtl 32768 1 btusb videobuf2_memops 16384 1 videobuf2_vmalloc btbcm 24576 1 btusb btintel 53248 1 btusb btmtk 12288 1 btusb videobuf2_v4l2 40960 1 uvcvideo brcmutil 24576 1 brcmsmac intel_rapl_msr 20480 0 bluetooth 1073152 34 btrtl,btmtk,btintel,btbcm,bnep,btusb,rfcomm b43 577536 0 videodev 360448 2 videobuf2_v4l2,uvcvideo snd_hda_intel 61440 1 ecdh_generic 16384 2 bluetooth snd_intel_dspcfg 32768 1 snd_hda_intel intel_rapl_common 36864 1 intel_rapl_msr videobuf2_common 86016 4 videobuf2_vmalloc,videobuf2_v4l2,uvcvideo,videobuf2_memops snd_intel_sdw_acpi 16384 1 snd_intel_dspcfg x86_pkg_temp_thermal 20480 0 cordic 12288 2 b43,brcmsmac sunrpc 811008 1 binfmt_misc 24576 1 mc 86016 4 videodev,videobuf2_v4l2,uvcvideo,videobuf2_common ecc 45056 1 ecdh_generic intel_powerclamp 24576 0 mac80211 1724416 2 b43,brcmsmac snd_hda_codec 212992 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek coretemp 24576 0 snd_hda_core 147456 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek libarc4 12288 1 mac80211 snd_hwdep 20480 1 snd_hda_codec kvm_intel 487424 0 i915 4145152 19 at24 24576 0 snd_pcm 196608 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core mei_pxp 16384 0 mei_hdcp 28672 0 ssb 102400 1 b43 nls_iso8859_1 12288 1 kvm 1404928 1 kvm_intel irqbypass 12288 1 kvm crct10dif_pclmul 12288 1 polyval_clmulni 12288 0 polyval_generic 12288 1 polyval_clmulni snd_seq_midi 24576 0 snd_seq_midi_event 16384 1 snd_seq_midi drm_buddy 20480 1 i915 ghash_clmulni_intel 16384 0 cryptd 24576 1 ghash_clmulni_intel rapl 20480 0 snd_rawmidi 57344 1 snd_seq_midi ttm 110592 1 i915 intel_cstate 20480 0 cfg80211 1318912 3 b43,mac80211,brcmsmac snd_seq 118784 9 snd_seq_midi,snd_seq_midi_event,snd_seq_dummy drm_display_helper 241664 1 i915 snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi think_lmi 45056 0 thinkpad_acpi 159744 0 firmware_attributes_class 12288 1 think_lmi wmi_bmof 12288 0 nvram 16384 1 thinkpad_acpi cec 94208 2 drm_display_helper,i915 snd_timer 49152 3 snd_seq,snd_hrtimer,snd_pcm i2c_i801 36864 0 i2c_smbus 16384 1 i2c_i801 lpc_ich 32768 0 rc_core 77824 1 cec snd 143360 17 snd_ctl_led,snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,thinkpad_acpi,snd_pcm,snd_rawmidi drm_kms_helper 270336 2 drm_display_helper,i915 mei_me 53248 2 i2c_algo_bit 16384 1 i915 bcma 86016 2 b43,brcmsmac mei 167936 5 mei_hdcp,mei_pxp,mei_me soundcore 16384 2 snd_ctl_led,snd ledtrig_audio 12288 3 snd_ctl_led,snd_hda_codec_generic,thinkpad_acpi platform_profile 12288 1 thinkpad_acpi input_leds 12288 0 joydev 32768 0 mac_hid 12288 0 serio_raw 20480 0 msr 12288 0 parport_pc 53248 0 ppdev 24576 0 lp 28672 0 parport 77824 3 parport_pc,lp,ppdev drm 761856 13 drm_kms_helper,drm_display_helper,drm_buddy,thinkpad_acpi,i915,ttm efi_pstore 12288 0 dmi_sysfs 20480 0 ip_tables 36864 0 x_tables 69632 1 ip_tables autofs4 57344 2 btrfs 1945600 2 blake2b_generic 24576 0 xor 20480 1 btrfs raid6_pq 126976 1 btrfs libcrc32c 12288 1 btrfs hid_generic 12288 0 usbhid 77824 0 hid 180224 2 usbhid,hid_generic uas 28672 0 usb_storage 86016 1 uas crc32_pclmul 12288 0 psmouse 212992 0 ahci 49152 3 video 73728 2 thinkpad_acpi,i915 r8169 114688 0 xhci_pci 24576 0 libahci 57344 1 ahci realtek 36864 1 xhci_pci_renesas 20480 1 xhci_pci wmi 40960 3 video,wmi_bmof,think_lmi $ ls -la /etc/modprobe.d/ insgesamt 56 drwxr-xr-x 1 root root 512 Feb 10 16:04 . drwxr-xr-x 1 root root 4536 Feb 10 13:55 .. -rw-r--r-- 1 root root 7262 Feb 10 15:54 8852bu.conf -rw-r--r-- 1 root root 2507 Feb 22 2021 alsa-base.conf -rw-r--r-- 1 root root 154 Aug 23 2022 amd64-microcode-blacklist.conf -rw-r--r-- 1 root root 325 Feb 15 2023 blacklist-ath_pci.conf -rw-r--r-- 1 root root 1518 Feb 15 2023 blacklist.conf -rw-r--r-- 1 root root 210 Feb 15 2023 blacklist-firewire.conf -rw-r--r-- 1 root root 677 Feb 15 2023 blacklist-framebuffer.conf -rw-r--r-- 1 root root 156 Feb 22 2021 blacklist-modem.conf lrwxrwxrwx 1 root root 41 Mai 1 2023 blacklist-oss.conf -> /lib/linux-sound-base/noOSS.modprobe.conf -rw-r--r-- 1 root root 583 Feb 15 2023 blacklist-rare-network.conf -rw-r--r-- 1 root root 127 Jan 31 2023 dkms.conf -rw-r--r-- 1 root root 154 Feb 20 2023 intel-microcode-blacklist.conf -rw-r--r-- 1 root root 347 Feb 15 2023 iwlwifi.conf Geladen scheint es aber noch nicht zu sein: $ lsmod | grep 8852bu Keine Ausgabe. ~$ sudo modprobe 8852bu modprobe: ERROR: could not insert '8852bu': Key was rejected by service modinfo liefert Infos, also muss es existieren: $ modinfo 8852bu filename: /lib/modules/6.5.0-17-generic/updates/dkms/8852bu.ko.zst import_ns: VFS_internal_I_am_really_a_filesystem_and_am_NOT_a_driver version: v1.19.3-45-g7583a804a.20230505 author: Realtek Semiconductor Corp. description: Realtek Wireless Lan Driver license: GPL srcversion: 0DE5E68C82450480486EF0A alias: usb:v35BCp0108d*dc*dsc*dp*icFFiscFFipFFin* alias: usb:v0DB0p6931d*dc*dsc*dp*icFFiscFFipFFin* alias: usb:v7392p6822d*dc*dsc*dp*icFFiscFFipFFin* alias: usb:v3574p6121d*dc*dsc*dp*icFFiscFFipFFin* alias: usb:v0B05p1A62d*dc*dsc*dp*icFFiscFFipFFin* alias: usb:v0586p3428d*dc*dsc*dp*icFFiscFFipFFin* alias: usb:v0BDApA85Bd*dc*dsc*dp*icFFiscFFipFFin* alias: usb:v0BDApB85Ad*dc*dsc*dp*icFFiscFFipFFin* alias: usb:v0BDApB852d*dc*dsc*dp*icFFiscFFipFFin* alias: usb:v0BDApB83Ad*dc*dsc*dp*icFFiscFFipFFin* alias: usb:v0BDApB832d*dc*dsc*dp*icFFiscFFipFFin* depends: cfg80211 retpoline: Y name: 8852bu vermagic: 6.5.0-17-generic SMP preempt mod_unload modversions sig_id: PKCS#7 signer: NB-Name Secure Boot Module Signature key sig_key: 0D:...:5B sig_hashalgo: sha512 signature: 1A:...5F: parm: rtw_wireless_mode:int parm: rtw_band_type:int parm: rtw_max_bss_cnt:int parm: rtw_usb_rxagg_mode:int parm: rtw_dynamic_agg_enable:int parm: rtw_tx_bw_mode:The max tx bw for 2G/5G/6G. format is the same as rtw_bw_mode (uint) parm: rtw_max_amsdu_len:uint parm: rtw_tx_ampdu_num:int parm: rtw_rx_ampdu_sz_limit_1ss:RX AMPDU size limit for 1SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_rx_ampdu_sz_limit_2ss:RX AMPDU size limit for 2SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_rx_ampdu_sz_limit_3ss:RX AMPDU size limit for 3SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_rx_ampdu_sz_limit_4ss:RX AMPDU size limit for 4SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_vht_enable:int parm: rtw_vht_24g_enable:int parm: rtw_vht_rx_mcs_map:VHT RX MCS map (uint) parm: rtw_he_enable:int parm: rtw_rf_path:int parm: rtw_tx_nss:int parm: rtw_rx_nss:int parm: rtw_init_regd_always_apply:Whether INIT regd request is always applied (being included when taking intersection together with higher priority requests) when regd source is RTK_PRIV (uint) parm: rtw_user_regd_always_apply:Whether USER regd request is always applied (being included when taking intersection together with higher priority requests) when regd source is RTK_PRIV (uint) parm: rtw_country_code:The default country code (in alpha2) (charp) parm: rtw_channel_plan:The default chplan ID when rtw_alpha2 is not specified or valid (uint) parm: rtw_excl_chs:Exclusive channel list of 2G and 5G band (array of uint) parm: rtw_dis_ch_flags:The flags with which channel is to be disabled (charp) parm: rtw_bcn_hint_valid_ms:The length of time beacon hint continue (uint) parm: rtw_country_ie_slave_en_mode:802.11d country IE slave enable mode: 0: disable, 1: enable, 2: enable when INIT/USER set world wide mode (uint) parm: rtw_country_ie_slave_flags:802.11d country IE slave flags: BIT0: take intersection when having multiple received IEs, otherwise choose effected one from received IEs, BIT1: consider all environment BSSs, otherwise associated BSSs only (uint) parm: rtw_country_ie_slave_en_role:802.11d country IE slave enable role: BIT0:pure STA mode, BIT1:P2P group client (uint) parm: rtw_country_ie_slave_en_ifbmp:802.11d country IE slave enable iface bitmap (uint) parm: rtw_country_ie_slave_scan_int_ms:802.11d country IE slave auto scan interval in ms to find environment BSSs. 0: no environment BSS auto scan triggered by driver self (uint) parm: rtw_btcoex_enable:BT co-existence on/off, 0:off, 1:on, 2:by efuse (int) parm: rtw_ant_num:Antenna number setting, 0:by efuse (int) parm: rtw_pci_dynamic_aspm_linkctrl:int parm: rtw_qos_opt_enable:int parm: ifname:The default name to allocate for first interface (charp) parm: if2name:The default name to allocate for second interface (charp) parm: rtw_vo_edca:uint parm: rtw_ap_src_b2u_flags:int parm: rtw_ap_fwd_b2u_flags:int parm: rtw_wowlan_sta_mix_mode:int parm: rtw_pwrtrim_enable:int parm: rtw_initmac:charp parm: rtw_chip_version:int parm: rtw_rfintfs:int parm: rtw_lbkmode:int parm: rtw_network_mode:int parm: rtw_band:int parm: rtw_channel:int parm: rtw_mp_mode:int parm: rtw_wmm_enable:int parm: rtw_vrtl_carrier_sense:int parm: rtw_vcs_type:int parm: rtw_hw_rts_en:int parm: rtw_busy_thresh:int parm: rtw_ht_enable:int parm: rtw_bw_mode:int parm: rtw_ampdu_enable:int parm: rtw_stbc_cap:int parm: rtw_rx_ampdu_amsdu:int parm: rtw_tx_ampdu_amsdu:int parm: rtw_quick_addba_req:int parm: rtw_beamform_cap:int parm: rtw_sw_proto_bf_cap_phy0:int parm: rtw_sw_proto_bf_cap_phy1:int parm: rtw_dyn_txbf:int parm: rtw_lowrate_two_xmit:int parm: rtw_low_power:int parm: rtw_wifi_spec:int parm: rtw_full_ch_in_p2p_handshake:int parm: rtw_antdiv_cfg:int parm: rtw_antdiv_type:int parm: rtw_drv_ant_band_switch:int parm: rtw_single_ant_path:int parm: rtw_switch_usb_mode:int parm: rtw_hwpwrp_detect:int parm: rtw_hw_wps_pbc:int parm: rtw_check_hw_status:int parm: rtw_max_roaming_times:The max roaming times to try (uint) parm: rtw_hiq_filter:0:allow all, 1:allow special, 2:deny all (uint) parm: rtw_adaptivity_en:0:disable, 1:enable, 2:auto (uint) parm: rtw_adaptivity_mode:0:normal, 1:carrier sense (uint) parm: rtw_adaptivity_th_l2h_ini:th_l2h_ini for Adaptivity (int) parm: rtw_adaptivity_th_edcca_hl_diff:th_edcca_hl_diff for Adaptivity (int) parm: rtw_adaptivity_idle_probability:rtw_adaptivity_idle_probability (int) parm: rtw_dfs_region_domain:0:NONE, 1:FCC, 2:MKK, 3:ETSI, 4:KCC (uint) parm: rtw_amsdu_mode:0:non-spp, 1:spp, 2:all drop (uint) parm: rtw_amplifier_type_2g:BIT3:2G ext-PA, BIT4:2G ext-LNA (uint) parm: rtw_amplifier_type_5g:BIT6:5G ext-PA, BIT7:5G ext-LNA (uint) parm: rtw_rfe_type:default init value:64 (uint) parm: rtw_powertracking_type:default init value:64 (uint) parm: rtw_GLNA_type:default init value:0 (uint) parm: rtw_TxBBSwing_2G:default init value:0xFF (uint) parm: rtw_TxBBSwing_5G:default init value:0xFF (uint) parm: rtw_OffEfuseMask:default open Efuse Mask value:0 (uint) parm: rtw_FileMaskEfuse:default drv Mask Efuse value:0 (uint) parm: rtw_rxgain_offset_2g:default RF Gain 2G Offset value:0 (uint) parm: rtw_rxgain_offset_5gl:default RF Gain 5GL Offset value:0 (uint) parm: rtw_rxgain_offset_5gh:uint parm: rtw_rxgain_offset_5gm:default RF Gain 5GM Offset value:0 (uint) parm: rtw_pll_ref_clk_sel:force pll_ref_clk_sel, 0xF:use autoload value (uint) parm: rtw_tx_pwr_by_rate:0:Disable, 1:Enable, 2: Depend on efuse (int) parm: rtw_tx_pwr_lmt_enable:0:Disable, 1:Enable, 2: Depend on efuse (int) parm: rtw_target_tx_pwr_2g_a:2.4G target tx power (unit:dBm) of RF path A for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_2g_b:2.4G target tx power (unit:dBm) of RF path B for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_2g_c:2.4G target tx power (unit:dBm) of RF path C for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_2g_d:2.4G target tx power (unit:dBm) of RF path D for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_a:5G target tx power (unit:dBm) of RF path A for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_b:5G target tx power (unit:dBm) of RF path B for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_c:5G target tx power (unit:dBm) of RF path C for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_d:5G target tx power (unit:dBm) of RF path D for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_phydm_ability:uint parm: rtw_halrf_ability:uint parm: rtw_rfk_ability:uint parm: rtw_fw_ofld_cap:uint parm: rtw_edcca_th_2g:uint parm: rtw_edcca_th_5g:uint parm: rtw_edcca_cs_th:uint parm: rtw_en_napi:int parm: rtw_en_gro:int parm: rtw_iqk_fw_offload:int parm: rtw_ch_switch_offload:int parm: rtw_en_tdls:int parm: rtw_en_dyn_rrsr:int parm: rtw_rrsr_value:int parm: rtw_scan_interval_thr:Threshold used to judge if scan request comes from scan UI, unit is ms. (uint) parm: rtw_roch_min_home_dur:uint parm: rtw_roch_max_away_dur:uint parm: rtw_roch_extend_dur:uint parm: rtw_en_ecsa:uint parm: rtw_quota_turbo_en:int parm: rtw_scan_pch_ex:uint An der Config wurde nichts verändert: # /etc/modprobe.d/8852bu.conf # # Purpose: Allow easy access to specific driver options. # # Edit the following line to change, add or delete options: options 8852bu rtw_switch_usb_mode=0 rtw_he_enable=1 rtw_vht_enable=1 rtw_dfs_region_domain=0 # # Note: To activate USB3 mode, change `rtw_switch_usb_mode=0` above to # `rtw_switch_usb_mode=1` # # Note: The `options` line shown above is a good default for managed mode. Below is # an example for AP mode. Modify as required after reading the documentation: #options 8852bu rtw_switch_usb_mode=0 rtw_he_enable=2 rtw_vht_enable=2 rtw_dfs_region_domain=1 # # Note: See documentation for rtw_dfs_region_domain below. # # After editing is complete, save this file (if using nano: Ctrl + x, y, Enter) # and reboot to activate the changes. # # Documentation: # # ----- # # USB options: ( rtw_switch_usb_mode ) # # 0 = No switch (default) # 1 = Switch from usb 2.0 to usb 3.0 # 2 = Switch from usb 3.0 to usb 2.0 # # ----- # # HE options ( rtw_he_enable ) # # 0 = Disable # 1 = Enable (default) # 2 = Force auto enable (use only for AP mode) # # Notes: # - A non-default setting can degrade performance greatly in managed mode. # - Option 2 allows 80 MHz channel width for 5GHz AP mode, such as when # you are using hostapd. # # ----- # # VHT options ( rtw_vht_enable ) # # 0 = Disable # 1 = Enable (default) # 2 = Force auto enable (use only for AP mode) # # Notes: # - A non-default setting can degrade performance greatly in managed mode. # - Option 2 allows 80 MHz channel width for 5GHz AP mode, such as when # you are using hostapd. # # ----- # # DFS Options ( rtw_dfs_region_domain ) # # 0 = NONE (default) # 1 = FCC # 2 = MKK # 3 = ETSI # # Notes: # - Activates DFS channels in AP mode. # - DFS FCC 80 MHz channels for hostapd: 52(58), 100(106), 116(122) and 132(138) # - For more information: https://en.wikipedia.org/wiki/List_of_WLAN_channels # # Note: An AP needs to listen on a DFS channel for a period of 60 seconds # before transmitting on the channel. If any radar pulses are detected, # the AP cannot use that channel and will have to try a different channel. # # ----- # # Wireless Mode options ( rtw_wireless_mode ) # # Note: The following settings are for an AC class adapter and need to # be updated for AX. # # 1 = 2.4GHz 802.11b # 2 = 2.4GHz 802.11g # 3 = 2.4GHz 802.11b/g # 4 = 5GHz 802.11a # 8 = 2.4Hz 802.11n # 11 = 2.4GHz 802.11b/g/n # 16 = 5GHz 802.11n # 20 = 5GHz 802.11a/n # 64 = 5GHz 802.11ac # 84 = 5GHz 802.11a/n/ac # 95 = 2.4GHz 802.11b/g/n 5GHz 802.11a/n/ac # # ----- # # To see all options that are available: # # $ ls /sys/module/8852bu/parameters/ # # if2name rtw_max_bss_cnt # ifname rtw_max_roaming_times # rtw_adaptivity_en rtw_mp_mode # rtw_adaptivity_idle_probability rtw_network_mode # rtw_adaptivity_mode rtw_OffEfuseMask # rtw_adaptivity_th_edcca_hl_diff rtw_pci_dynamic_aspm_linkctrl # rtw_adaptivity_th_l2h_ini rtw_phl_log_level # rtw_ampdu_enable rtw_phydm_ability # rtw_amplifier_type_2g rtw_phy_file_path # rtw_amplifier_type_5g rtw_pll_ref_clk_sel # rtw_amsdu_mode rtw_powertracking_type # rtw_antdiv_cfg rtw_pwrtrim_enable # rtw_antdiv_type rtw_qos_opt_enable # rtw_ant_num rtw_quick_addba_req # rtw_ap_fwd_b2u_flags rtw_quota_turbo_en # rtw_ap_src_b2u_flags rtw_rfe_type # rtw_band rtw_rfintfs # rtw_band_type rtw_rfk_ability # rtw_bcn_hint_valid_ms rtw_rf_path # rtw_beamform_cap rtw_roch_extend_dur # rtw_btcoex_enable rtw_roch_max_away_dur # rtw_busy_thresh rtw_roch_min_home_dur # rtw_bw_mode rtw_rrsr_value # rtw_channel rtw_rx_ampdu_amsdu # rtw_channel_plan rtw_rx_ampdu_sz_limit_1ss # rtw_check_hw_status rtw_rx_ampdu_sz_limit_2ss # rtw_chip_version rtw_rx_ampdu_sz_limit_3ss # rtw_ch_switch_offload rtw_rx_ampdu_sz_limit_4ss # rtw_country_code rtw_rxgain_offset_2g # rtw_country_ie_slave_en_ifbmp rtw_rxgain_offset_5gh # rtw_country_ie_slave_en_mode rtw_rxgain_offset_5gl # rtw_country_ie_slave_en_role rtw_rxgain_offset_5gm # rtw_country_ie_slave_flags rtw_rx_nss # rtw_country_ie_slave_scan_int_ms rtw_scan_interval_thr # rtw_decrypt_phy_file rtw_scan_pch_ex # rtw_dfs_region_domain rtw_single_ant_path # rtw_dis_ch_flags rtw_stbc_cap # rtw_drv_ant_band_switch rtw_switch_usb_mode # rtw_drv_log_level rtw_sw_proto_bf_cap_phy0 # rtw_dynamic_agg_enable rtw_sw_proto_bf_cap_phy1 # rtw_dyn_txbf rtw_target_tx_pwr_2g_a # rtw_edcca_cs_th rtw_target_tx_pwr_2g_b # rtw_edcca_th_2g rtw_target_tx_pwr_2g_c # rtw_edcca_th_5g rtw_target_tx_pwr_2g_d # rtw_en_dyn_rrsr rtw_target_tx_pwr_5g_a # rtw_en_ecsa rtw_target_tx_pwr_5g_b # rtw_en_gro rtw_target_tx_pwr_5g_c # rtw_en_napi rtw_target_tx_pwr_5g_d # rtw_en_tdls rtw_tx_ampdu_amsdu # rtw_excl_chs rtw_tx_ampdu_num # rtw_FileMaskEfuse rtw_TxBBSwing_2G # rtw_full_ch_in_p2p_handshake rtw_TxBBSwing_5G # rtw_fw_ofld_cap rtw_tx_bw_mode # rtw_GLNA_type rtw_tx_nss # rtw_halrf_ability rtw_tx_pwr_by_rate # rtw_he_enable rtw_tx_pwr_lmt_enable # rtw_hiq_filter rtw_usb_rxagg_mode # rtw_ht_enable rtw_user_regd_always_apply # rtw_hwpwrp_detect rtw_vcs_type # rtw_hw_rts_en rtw_vht_24g_enable # rtw_hw_wps_pbc rtw_vht_enable # rtw_initmac rtw_vht_rx_mcs_map # rtw_init_regd_always_apply rtw_vo_edca # rtw_iqk_fw_offload rtw_vrtl_carrier_sense # rtw_lbkmode rtw_wifi_spec # rtw_load_phy_file rtw_wireless_mode # rtw_low_power rtw_wmm_enable # rtw_lowrate_two_xmit rtw_wowlan_sta_mix_mode # rtw_max_amsdu_len # # ----- # # To see the values that are in use: # # $ grep [[:alnum:]] /sys/module/8852bu/parameters/* # # ----- # # hostapd setup information for rtl8852bu # Note: The best settings can vary but the following may be a good place to start. # # /etc/modprobe.d/8852bu.conf # options 8852bu rtw_switch_usb_mode=0 rtw_he_enable=2 rtw_vht_enable=2 rtw_dfs_region_domain=1 # # Note: The best setting for `rtw_dfs_region_domain=` will depend on your location. # # /etc/hostapd/hostapd.conf # # hw ht capab: 19e3 #ht_capab=[LDPC][HT40+][HT40-][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40] # # hw vht capab: 03c011b1 #vht_capab=[MAX-MPDU-7991][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][SU-BEAMFORMEE][MU-BEAMFORMEE][VHT-TXOP-PS][HTC-VHT][MAX-A-MPDU-LEN-EXP7] # # hw he capab: 0x0001120a0060 # # ----- |
(Themenstarter)
Anmeldungsdatum: Beiträge: 157 |
OK, ohne Secure Boot scheint der AX1800 nun zu funktionieren. Teste das mal weiter. Wieso er trotz Signatur nicht akzeptiert wird. 🙄 Vielleicht ist im die automatische Signierung von dem Install Script nicht genehm genug. Vielleicht hat noch einer ne Idee dazu, sonst muss es leider ohne Secure Boot gehen. Vielen Dank schon mal an alle! Viele Liebe Grüße Revan335 |
(Themenstarter)
Anmeldungsdatum: Beiträge: 157 |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 157 |
Weiß zufällig einer was mit der Github Seite passiert ist? Über die Wayback Machine ist sie noch aufrufbar: https://web.archive.org/web/20250124214613/https://github.com/morrownr/rtl8852bu/ Sonst gibt es nen 404 Error beim aufrufen der Seite. https://github.com/morrownr/rtl8852bu/ |
![]() Anmeldungsdatum: Beiträge: 17165 |
schaust du so: https://github.com/morrownr/ |
(Themenstarter)
Anmeldungsdatum: Beiträge: 157 |
Dann ist es hierhin gewandert: https://github.com/morrownr/rtl8852bu-20240418 Vielen Dank! |