Anselm1
Anmeldungsdatum: 6. Januar 2019
Beiträge: 225
|
Seit ungefähr einer Woche habe ich das folgende Problem: Nach längerer Nichtnutzung des laufenden Rechners (circa 2 Stunden) ist der Bildschirm mehr oder weniger eingefroren. Fenster lassen sich nicht mehr schließen, Fenster in der Kommandozeile nicht wieder öffnen. Die einzige verbleibende Möglichkeit ist mit Alt-F2 die Kommandozeile aufzurufen und den Rechner mit "shutdown" oder "halt" herunter zu fahren. Danach bleibt beim ersten starten die Bildschirmoberfläche zunächst einmal schwarz. Lediglich die Kommandozeile steht zur Verfügung. Erst bei einem erneuten Neustart erhält man wieder die vollständige Benutzeroberfläche. Irgendwie scheint ein Problem mit dem x-server vorzuliegen. Heute ist das Problem erstmalig bei laufender Nutzung (google earth unter brave) aufgetreten.
|
Tut-tut
Anmeldungsdatum: 24. August 2012
Beiträge: 1384
|
Vielleicht solltest du dein Thema in einer anderen Rubrik einstellen? Es könnte doch auch sein, dass etwas mit dem PC nicht in Ordnung ist, z.B. der Lüfter nicht richtig kühlt?
Ein PC meines Bekannten fror auch nach einiger Zeit ein, da er zu warm wurde. Ich musste die Seitenplatte des Gehäuses auflassen, um zu sehen ob der Lüfter anlief.
|
ChickenLipsRfun2eat
Anmeldungsdatum: 6. Dezember 2009
Beiträge: 12067
|
Hallo! Wenn es mal wieder so weit ist: Was geben nach der Anmeldung auf einer virtuellen Konsole die Logdateien preis? In erster Linie dmesg und journalctl (Fehler anzeigen mit:journalctl -xep err ). Blind geraten: ACPI/Energiesparmodi oder NVidia-Treiber.
|
Anselm1
(Themenstarter)
Anmeldungsdatum: 6. Januar 2019
Beiträge: 225
|
Ich habe einen lenovo t450 laptop. Weil es bei den backups Probleme gibt, habe ich für den Netzbetrieb alle Energiesparoptionen unter Ubuntu ausgeschaltet.
Der Rechner geht aber weiterhin in den Schlafmodus, wenn er nicht benutzt wird. Es scheint da weitere Einstellungen im Bios zu geben.
Die werde ich jetzt mal suchen und versuchen ebenfalls auszuschalten. Unabhängig davon werde ich die Log-Dateien ziehen, sobald das Problem das nächste mal auftritt.
|
Anselm1
(Themenstarter)
Anmeldungsdatum: 6. Januar 2019
Beiträge: 225
|
Also ein Lüfter-Problem bzw Temperatur-Problem ist das wohl nicht! Die Temperatur betrug beim Absturz 34 Grad. Wie schon gesagt trifft das Problem hauptsächlich auf, wenn der Rechner lange unbenutzt gelaufen ist!
|
Anselm1
(Themenstarter)
Anmeldungsdatum: 6. Januar 2019
Beiträge: 225
|
Die Terminalabfrage lieferte folgende Ergebnisse: @Saul:~$ journalctl -xep err
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- A start job for unit UNIT has finished with a failure.
--
-- The job identifier is 22 and the job result is failed.
Dez 24 12:57:46 Saul systemd[1136]: Failed to start Music Player Daemon.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- A start job for unit UNIT has finished with a failure.
--
-- The job identifier is 29 and the job result is failed.
Dez 24 12:57:46 Saul kernel: usb 2-3.4.1: 3:1: cannot get freq at ep 0x84
Dez 24 12:57:46 Saul kernel: usb 2-3.4.1: 3:1: cannot get freq at ep 0x84
Dez 24 12:57:48 Saul /hpfax[1225]: [1225]: error: Failed to create /var/spool/cups/tmp/.hpl>
Dez 24 12:57:58 Saul sddm-helper[1324]: gkr-pam: unable to locate daemon control file
Dez 24 12:57:58 Saul systemd[1337]: mpd.socket: Failed to create listening socket ([::]:660>
Dez 24 12:57:58 Saul systemd[1337]: Failed to listen on mpd.socket.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- A start job for unit UNIT has finished with a failure.
--
-- The job identifier is 17 and the job result is failed.
Dez 24 12:57:58 Saul systemd[1337]: Failed to start Music Player Daemon.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- A start job for unit UNIT has finished with a failure.
--
-- The job identifier is 28 and the job result is failed.
lines 2334-2369/2369 (END) dmesg sagt: [ 0.042589] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.042590] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.042591] ACPI: IRQ0 used by override.
[ 0.042592] ACPI: IRQ9 used by override.
[ 0.042594] Using ACPI (MADT) for SMP configuration information
[ 0.042595] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.042598] TSC deadline timer available
[ 0.042599] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.042614] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.042616] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.042616] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.042617] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.042618] PM: Registered nosave memory: [mem 0x10000000-0x1000afff]
[ 0.042619] PM: Registered nosave memory: [mem 0xaf0aa000-0xbcbfefff]
[ 0.042620] PM: Registered nosave memory: [mem 0xbcbff000-0xbcd7efff]
[ 0.042620] PM: Registered nosave memory: [mem 0xbcd7f000-0xbcdfefff]
[ 0.042621] PM: Registered nosave memory: [mem 0xbcdff000-0xbfffffff]
[ 0.042621] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
[ 0.042622] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.042622] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.042623] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.042623] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.042624] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.042624] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.042625] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.042625] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.042626] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.042626] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.042627] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.042627] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.042628] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.042629] [mem 0xc0000000-0xf7ffffff] available for PCI devices
[ 0.042630] Booting paravirtualized kernel on bare hardware
[ 0.042633] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.042638] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.042938] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[ 0.042944] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[ 0.042945] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.042969] Built 1 zonelists, mobility grouping on. Total pages: 3020003
[ 0.042970] Policy zone: Normal
[ 0.042971] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-58-generic root=UUID=f483f88d-b94c-4952-a61b-39ef45ebd664 ro quiet splash vt.handoff=7
[ 0.044260] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.044887] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.044960] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.049924] Calgary: detecting Calgary via BIOS EBDA area
[ 0.049925] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.079662] Memory: 11875076K/12271852K available (14339K kernel code, 2426K rwdata, 4932K rodata, 2720K init, 4956K bss, 396776K reserved, 0K cma-reserved)
[ 0.079668] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.079806] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.079819] Kernel/User page tables isolation: enabled
[ 0.079832] ftrace: allocating 44541 entries in 174 pages
[ 0.097479] rcu: Hierarchical RCU implementation.
[ 0.097480] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.097481] Tasks RCU enabled.
[ 0.097482] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.097482] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.100381] NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16
[ 0.100681] random: crng done (trusting CPU's manufacturer)
[ 0.100699] vt handoff: transparent VT on vt#7
[ 0.100705] Console: colour dummy device 80x25
[ 0.100708] printk: console [tty0] enabled
[ 0.100725] ACPI: Core revision 20190816
[ 0.100882] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.100892] APIC: Switch to symmetric I/O mode setup
[ 0.100894] DMAR: Host address width 39
[ 0.100895] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.100900] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.100900] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.100903] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.100904] DMAR: RMRR base: 0x000000bafcc000 end: 0x000000bafe2fff
[ 0.100905] DMAR: RMRR base: 0x000000bd800000 end: 0x000000bfffffff
[ 0.100906] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.100907] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.100907] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.100908] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.101367] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.101367] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.101974] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.120894] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25641dc4a8e, max_idle_ns: 440795265595 ns
[ 0.120898] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.01 BogoMIPS (lpj=10376024)
[ 0.120900] pid_max: default: 32768 minimum: 301
[ 0.120933] LSM: Security Framework initializing
[ 0.120942] Yama: becoming mindful.
[ 0.120980] AppArmor: AppArmor initialized
[ 0.121036] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.121067] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.121083] *** VALIDATE tmpfs ***
[ 0.121226] *** VALIDATE proc ***
[ 0.121275] *** VALIDATE cgroup1 ***
[ 0.121276] *** VALIDATE cgroup2 ***
[ 0.121330] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.121341] process: using mwait in idle threads
[ 0.121344] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.121344] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.121347] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.121348] Spectre V2 : Mitigation: Full generic retpoline
[ 0.121349] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.121349] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.121350] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.121351] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.121352] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.121355] TAA: Mitigation: Clear CPU buffers
[ 0.121356] SRBDS: Mitigation: Microcode
[ 0.121357] MDS: Mitigation: Clear CPU buffers
[ 0.121601] Freeing SMP alternatives memory: 40K
[ 0.124970] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.125086] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.125092] ... version: 3
[ 0.125092] ... bit width: 48
[ 0.125093] ... generic registers: 4
[ 0.125093] ... value mask: 0000ffffffffffff
[ 0.125094] ... max period: 00007fffffffffff
[ 0.125094] ... fixed-purpose events: 3
[ 0.125095] ... event mask: 000000070000000f
[ 0.125125] rcu: Hierarchical SRCU implementation.
[ 0.126191] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.126272] smp: Bringing up secondary CPUs ...
[ 0.126358] x86: Booting SMP configuration:
[ 0.126359] .... node #0, CPUs: #1
[ 0.127603] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.127603] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.
[ 0.127603] #2 #3
[ 0.130212] smp: Brought up 1 node, 4 CPUs
[ 0.130212] smpboot: Max logical packages: 2
[ 0.130212] smpboot: Total of 4 processors activated (20752.04 BogoMIPS)
[ 0.130252] devtmpfs: initialized
[ 0.130252] x86/mm: Memory block size: 128MB
[ 0.133688] PM: Registering ACPI NVS region [mem 0xbcbff000-0xbcd7efff] (1572864 bytes)
[ 0.133688] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.133688] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.133688] pinctrl core: initialized pinctrl subsystem
[ 0.133688] PM: RTC time: 11:57:35, date: 2020-12-24
[ 0.133688] NET: Registered protocol family 16
[ 0.133688] audit: initializing netlink subsys (disabled)
[ 0.133688] audit: type=2000 audit(1608811055.032:1): state=initialized audit_enabled=0 res=1
[ 0.133688] EISA bus registered
[ 0.133688] cpuidle: using governor ladder
[ 0.133688] cpuidle: using governor menu
[ 0.133688] Detected 1 PCC Subspaces
[ 0.133688] Registering PCC driver as Mailbox controller
[ 0.133688] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.133688] ACPI: bus type PCI registered
[ 0.133688] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.133688] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.133688] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.133688] PCI: Using configuration type 1 for base access
[ 0.133688] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.134285] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.134285] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.136975] ACPI: Added _OSI(Module Device)
[ 0.136975] ACPI: Added _OSI(Processor Device)
[ 0.136975] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.136975] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.136975] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.136975] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.136975] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.158270] ACPI: 12 ACPI AML tables successfully acquired and loaded
[ 0.159127] ACPI: EC: EC started
[ 0.159128] ACPI: EC: interrupt blocked
[ 0.160247] ACPI: \: Used as first EC
[ 0.160249] ACPI: \: GPE=0x25, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.160249] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.160698] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.166026] ACPI Error: Needed type [Reference], found [Integer] 00000000297d62e6 (20190816/exresop-66)
[ 0.166031] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20190816/dswexec-431)
[ 0.166035] No Local Variables are initialized for Method [_PDC]
[ 0.166036] Initialized Arguments for Method [_PDC]: (1 arguments defined for method invocation)
[ 0.166037] Arg0: 000000003654bc75 <Obj> Buffer(12) 01 00 00 00 01 00 00 00
[ 0.166042] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20190816/psparse-529)
[ 0.166457] ACPI: Dynamic OEM Table Load:
[ 0.166465] ACPI: SSDT 0xFFFF8AB86F563800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.166753] ACPI: Dynamic OEM Table Load:
[ 0.166753] ACPI: SSDT 0xFFFF8AB86F00C400 000119 (v02 PmRef ApCst 00003000 INTL 20120711)
[ 0.166753] ACPI: Interpreter enabled
[ 0.166753] ACPI: (supports S0 S3 S4 S5)
[ 0.166753] ACPI: Using IOAPIC for interrupt routing
[ 0.166753] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.166753] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.170157] ACPI: Power Resource [PUBS] (on)
[ 0.170290] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.170631] ACPI: Power Resource [NVP3] (on)
[ 0.170658] ACPI: Power Resource [NVP2] (on)
[ 0.174567] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.174677] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
[ 0.174785] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.174892] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
[ 0.174998] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.175079] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.175186] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.175293] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.175387] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.175391] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.175552] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR]
[ 0.175625] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.175626] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.175628] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.175628] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.175805] PCI host bridge to bus 0000:00
[ 0.175807] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.175808] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.175809] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.175810] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.175811] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[ 0.175812] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.175820] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.175900] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.175910] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
[ 0.175916] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.175920] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.175931] pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset
[ 0.176005] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.176014] pci 0000:00:03.0: reg 0x10: [mem 0xe1230000-0xe1233fff 64bit]
[ 0.176118] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.176135] pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit]
[ 0.176186] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.176257] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.176277] pci 0000:00:16.0: reg 0x10: [mem 0xe1239000-0xe123901f 64bit]
[ 0.176340] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.176405] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
[ 0.176420] pci 0000:00:19.0: reg 0x10: [mem 0xe1200000-0xe121ffff]
[ 0.176426] pci 0000:00:19.0: reg 0x14: [mem 0xe123e000-0xe123efff]
[ 0.176432] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
[ 0.176482] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.176551] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.176568] pci 0000:00:1b.0: reg 0x10: [mem 0xe1234000-0xe1237fff 64bit]
[ 0.176621] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.176687] pci 0000:00:1c.0: [8086:9c9a] type 01 class 0x060400
[ 0.176759] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.176902] pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400
[ 0.176983] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.177127] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.177146] pci 0000:00:1d.0: reg 0x10: [mem 0xe123d000-0xe123d3ff]
[ 0.177224] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.177302] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.177473] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.177487] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
[ 0.177492] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
[ 0.177498] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
[ 0.177503] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
[ 0.177510] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.177516] pci 0000:00:1f.2: reg 0x24: [mem 0xe123c000-0xe123c7ff]
[ 0.177545] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.177610] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.177625] pci 0000:00:1f.3: reg 0x10: [mem 0xe1238000-0xe12380ff 64bit]
[ 0.177642] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.177726] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[ 0.177759] pci 0000:00:1f.6: reg 0x10: [mem 0xe123b000-0xe123bfff 64bit]
[ 0.177965] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[ 0.178001] pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1100fff]
[ 0.178146] pci 0000:02:00.0: supports D1 D2
[ 0.178147] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.178277] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.178281] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff]
[ 0.178476] pci 0000:03:00.0: [8086:095b] type 00 class 0x028000
[ 0.178576] pci 0000:03:00.0: reg 0x10: [mem 0xe1000000-0xe1001fff 64bit]
[ 0.178868] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.179289] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.179293] pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe10fffff]
[ 0.180902] ACPI: EC: interrupt unblocked
[ 0.180902] ACPI: EC: event unblocked
[ 0.180902] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.180902] ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events
[ 0.180908] iommu: Default domain type: Translated
[ 0.181064] SCSI subsystem initialized
[ 0.181077] libata version 3.00 loaded.
[ 0.181077] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.181077] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.181077] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.181077] vgaarb: loaded
[ 0.181077] ACPI: bus type USB registered
[ 0.181077] usbcore: registered new interface driver usbfs
[ 0.181077] usbcore: registered new interface driver hub
[ 0.181077] usbcore: registered new device driver usb
[ 0.181077] pps_core: LinuxPPS API ver. 1 registered
[ 0.181077] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.181077] PTP clock support registered
[ 0.181077] EDAC MC: Ver: 3.0.0
[ 0.181107] PCI: Using ACPI for IRQ routing
[ 0.182135] PCI: pci_cache_line_size set to 64 bytes
[ 0.182454] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.182455] e820: reserve RAM buffer [mem 0xaf0aa000-0xafffffff]
[ 0.182456] e820: reserve RAM buffer [mem 0x33e000000-0x33fffffff]
[ 0.182550] NetLabel: Initializing
[ 0.182550] NetLabel: domain hash size = 128
[ 0.182551] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.182564] NetLabel: unlabeled traffic allowed by default
[ 0.185580] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.185584] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.188897] clocksource: Switched to clocksource tsc-early
[ 0.200621] *** VALIDATE bpf ***
[ 0.200694] VFS: Disk quotas dquot_6.6.0
[ 0.200710] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.200733] *** VALIDATE ramfs ***
[ 0.200736] *** VALIDATE hugetlbfs ***
[ 0.200816] AppArmor: AppArmor Filesystem Enabled
[ 0.200842] pnp: PnP ACPI init
[ 0.201431] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.201433] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.201434] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.201435] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[ 0.201436] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.201437] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.201438] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.201439] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.201441] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.201442] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.201443] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.201444] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.201445] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.201446] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.201447] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.201449] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.201450] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.201455] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.201564] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.201580] system 00:01: [io 0x1800-0x189f] has been reserved
[ 0.201582] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.201583] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 0.201584] system 00:01: [io 0x0900-0x097f] has been reserved
[ 0.201585] system 00:01: [io 0x0980-0x09ff] has been reserved
[ 0.201586] system 00:01: [io 0x0a00-0x0a7f] has been reserved
[ 0.201587] system 00:01: [io 0x0a80-0x0aff] has been reserved
[ 0.201588] system 00:01: [io 0x0b00-0x0b7f] has been reserved
[ 0.201590] system 00:01: [io 0x0b80-0x0bff] has been reserved
[ 0.201591] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.201592] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.201593] system 00:01: [io 0x1640-0x165f] has been reserved
[ 0.201595] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.201596] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.201598] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.201599] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.201600] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.201602] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.201606] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.201670] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.201689] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.201705] pnp 00:04: Plug and Play ACPI device, IDs LEN200f PNP0f13 (active)
[ 0.202243] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.202440] system 00:06: [mem 0xc0010000-0xc001ffff] has been reserved
[ 0.202441] system 00:06: [mem 0xc0000000-0xc000ffff] has been reserved
[ 0.202444] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.202483] pnp: PnP ACPI: found 7 devices
[ 0.203610] thermal_sys: Registered thermal governor 'fair_share'
[ 0.203611] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.203612] thermal_sys: Registered thermal governor 'step_wise'
[ 0.203612] thermal_sys: Registered thermal governor 'user_space'
[ 0.203613] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.208097] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.208131] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.208135] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff]
[ 0.208141] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.208144] pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe10fffff]
[ 0.208152] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.208153] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.208154] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.208155] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.208156] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[ 0.208157] pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff]
[ 0.208158] pci_bus 0000:03: resource 1 [mem 0xe1000000-0xe10fffff]
[ 0.208266] NET: Registered protocol family 2
[ 0.208433] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.208538] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.208745] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.208847] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.208911] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.208960] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.209024] NET: Registered protocol family 1
[ 0.209028] NET: Registered protocol family 44
[ 0.209037] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.209496] PCI: CLS 64 bytes, default 64
[ 0.209530] Trying to unpack rootfs image as initramfs...
[ 0.399429] Freeing initrd memory: 78908K
[ 0.420928] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.420929] software IO TLB: mapped [mem 0xab0aa000-0xaf0aa000] (64MB)
[ 0.421123] check: Scanning for low memory corruption every 60 seconds
[ 0.421556] Initialise system trusted keyrings
[ 0.421564] Key type blacklist registered
[ 0.421600] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.422823] zbud: loaded
[ 0.423153] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.423304] fuse: init (API version 7.31)
[ 0.423317] *** VALIDATE fuse ***
[ 0.423319] *** VALIDATE fuse ***
[ 0.423404] Platform Keyring initialized
[ 0.427252] Key type asymmetric registered
[ 0.427253] Asymmetric key parser 'x509' registered
[ 0.427260] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.427292] io scheduler mq-deadline registered
[ 0.427737] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.427787] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.427788] vesafb: scrolling: redraw
[ 0.427789] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.427807] vesafb: framebuffer at 0xd0000000, mapped to 0x00000000f218f49f, using 8128k, total 8128k
[ 0.427838] fbcon: Deferring console take-over
[ 0.427839] fb0: VESA VGA frame buffer device
[ 0.427851] intel_idle: MWAIT substates: 0x11142120
[ 0.427852] intel_idle: v0.4.1 model 0x3D
[ 0.428077] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.428358] ACPI: AC Adapter [AC] (on-line)
[ 0.428410] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.428437] ACPI: Lid Switch [LID]
[ 0.428467] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.428489] ACPI: Sleep Button [SLPB]
[ 0.428526] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.428545] ACPI: Power Button [PWRF]
[ 0.430400] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.430401] ACPI: Thermal Zone [THM0] (61 C)
[ 0.430523] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.432239] Linux agpgart interface v0.103
[ 0.436963] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.443783] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.456471] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 0.503377] loop: module loaded
[ 0.503570] libphy: Fixed MDIO Bus: probed
[ 0.503571] tun: Universal TUN/TAP device driver, 1.6
[ 0.503605] PPP generic driver version 2.4.2
[ 0.503670] VFIO - User Level meta-driver version: 0.3
[ 0.503748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.503750] ehci-pci: EHCI PCI platform driver
[ 0.503887] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.503893] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.503903] ehci-pci 0000:00:1d.0: debug port 2
[ 0.507818] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.507831] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe123d000
[ 0.520953] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.521015] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.521017] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.521018] usb usb1: Product: EHCI Host Controller
[ 0.521019] usb usb1: Manufacturer: Linux 5.4.0-58-generic ehci_hcd
[ 0.521020] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.521213] hub 1-0:1.0: USB hub found
[ 0.521218] hub 1-0:1.0: 3 ports detected
[ 0.521525] ehci-platform: EHCI generic platform driver
[ 0.521542] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.521546] ohci-pci: OHCI PCI platform driver
[ 0.521555] ohci-platform: OHCI generic platform driver
[ 0.521562] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.521680] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.521685] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.522728] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 0.522732] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.522856] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.522857] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.522858] usb usb2: Product: xHCI Host Controller
[ 0.522859] usb usb2: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
[ 0.522860] usb usb2: SerialNumber: 0000:00:14.0
[ 0.523021] hub 2-0:1.0: USB hub found
[ 0.523032] hub 2-0:1.0: 11 ports detected
[ 0.524118] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.524120] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.524123] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.524150] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.524151] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.524152] usb usb3: Product: xHCI Host Controller
[ 0.524153] usb usb3: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
[ 0.524153] usb usb3: SerialNumber: 0000:00:14.0
[ 0.524305] hub 3-0:1.0: USB hub found
[ 0.524311] hub 3-0:1.0: 4 ports detected
[ 0.524864] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.526832] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.526835] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.527076] mousedev: PS/2 mouse device common for all mice
[ 0.527367] rtc_cmos 00:02: RTC can wake from S4
[ 0.527558] rtc_cmos 00:02: registered as rtc0
[ 0.527570] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.527575] i2c /dev entries driver
[ 0.527620] device-mapper: uevent: version 1.0.3
[ 0.527680] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.527696] platform eisa.0: Probing EISA bus 0
[ 0.527698] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.527699] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.527699] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.527700] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.527701] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.527702] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.527703] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.527703] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.527704] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.527705] platform eisa.0: EISA: Detected 0 cards
[ 0.527711] intel_pstate: Intel P-state driver initializing
[ 0.527873] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.527926] drop_monitor: Initializing network drop monitor service
[ 0.528074] NET: Registered protocol family 10
[ 0.528610] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.533331] Segment Routing with IPv6
[ 0.533350] NET: Registered protocol family 17
[ 0.533413] Key type dns_resolver registered
[ 0.533589] RAS: Correctable Errors collector initialized.
[ 0.533616] microcode: sig=0x306d4, pf=0x40, revision=0x2f
[ 0.533647] microcode: Microcode Update Driver: v2.2.
[ 0.533650] IPI shorthand broadcast: enabled
[ 0.533656] sched_clock: Marking stable (533317259, 327008)->(534206505, -562238)
[ 0.533720] registered taskstats version 1
[ 0.533727] Loading compiled-in X.509 certificates
[ 0.534405] Loaded X.509 cert 'Build time autogenerated kernel key: 6b3d3d266049f4a4077ed3557f79f9ce7832433a'
[ 0.534438] zswap: loaded using pool lzo/zbud
[ 0.534498] Key type ._fscrypt registered
[ 0.534499] Key type .fscrypt registered
[ 0.539056] Key type big_key registered
[ 0.539061] Key type trusted registered
[ 0.541219] Key type encrypted registered
[ 0.541222] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.541234] ima: Allocated hash algorithm: sha1
[ 0.653016] ima: No architecture policies found
[ 0.653033] evm: Initialising EVM extended attributes:
[ 0.653034] evm: security.selinux
[ 0.653034] evm: security.SMACK64
[ 0.653035] evm: security.SMACK64EXEC
[ 0.653035] evm: security.SMACK64TRANSMUTE
[ 0.653035] evm: security.SMACK64MMAP
[ 0.653036] evm: security.apparmor
[ 0.653036] evm: security.ima
[ 0.653037] evm: security.capability
[ 0.653038] evm: HMAC attrs: 0x1
[ 0.653523] PM: Magic number: 0:450:985
[ 0.653577] platform PNP0C14:02: hash matches
[ 0.653582] acpi PNP0C14:02: hash matches
[ 0.653660] rtc_cmos 00:02: setting system clock to 2020-12-24T11:57:36 UTC (1608811056)
[ 0.654707] Freeing unused decrypted memory: 2040K
[ 0.655099] Freeing unused kernel image memory: 2720K
[ 0.655137] Write protecting the kernel read-only data: 22528k
[ 0.655528] Freeing unused kernel image memory: 2008K
[ 0.655720] Freeing unused kernel image memory: 1212K
[ 0.663338] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.663339] x86/mm: Checking user space page tables
[ 0.670775] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.670777] Run /init as init process
[ 0.755071] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 0.755188] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 0.783751] ahci 0000:00:1f.2: version 3.0
[ 0.784919] ahci 0000:00:1f.2: BIOS update required for Link Power Management support
[ 0.785317] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 0.785341] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.787714] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.787715] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.787880] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.792002] cryptd: max_cpu_qlen set to 1000
[ 0.797202] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[ 0.797205] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.798416] AVX2 version of gcm_enc/dec engaged.
[ 0.798416] AES CTR mode by8 optimization enabled
[ 0.802869] scsi host0: ahci
[ 0.805197] scsi host1: ahci
[ 0.808684] scsi host2: ahci
[ 0.808752] ata1: SATA max UDMA/133 abar m2048@0xe123c000 port 0xe123c100 irq 46
[ 0.808753] ata2: DUMMY
[ 0.808754] ata3: DUMMY
[ 0.851248] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 0.851249] fb0: switching to inteldrmfb from VESA VGA
[ 0.851308] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 0.856943] usb 2-2: new full-speed USB device number 2 using xhci_hcd
[ 0.856945] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.860954] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.860956] [drm] Driver supports precise vblank timestamp query.
[ 0.860989] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.872076] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 0.917354] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 0.927162] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 0.927215] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x4) (20190816/exoparg2-393)
[ 0.927224]
Initialized Local Variables for Method [BFRQ]:
[ 0.927224] Local0: 000000003762b243 <Obj> Integer 0000000080000100
[ 0.927228] No Arguments are initialized for method [BFRQ]
[ 0.927230] ACPI Error: Aborting method \_SB.PCI0.LPC.EC.BFRQ due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.927235] ACPI Error: Aborting method \_SB.PCI0.VID.LCD0._BCL due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.927384] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 0.946675] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:7b:9d:81:51:b7
[ 0.946676] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.946704] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[ 0.947514] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.007288] usb 2-2: New USB device found, idVendor=1ea7, idProduct=0066, bcdDevice= 2.00
[ 1.007290] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.007291] usb 2-2: Product: 2.4G Mouse
[ 1.021265] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[ 1.021266] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.021552] hub 1-1:1.0: USB hub found
[ 1.021621] hub 1-1:1.0: 8 ports detected
[ 1.124938] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.126344] ata1.00: LPM support broken, forcing max_power
[ 1.128430] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.128431] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.133014] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.135005] ata1.00: ATA-9: Intenso SSD SATAIII, R1001A0, max UDMA/133
[ 1.135006] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.139591] ata1.00: LPM support broken, forcing max_power
[ 1.141681] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.141683] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.148273] ata1.00: configured for UDMA/133
[ 1.158498] scsi 0:0:0:0: Direct-Access ATA Intenso SSD SATA 1A0 PQ: 0 ANSI: 5
[ 1.158676] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.158690] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 1.158699] sd 0:0:0:0: [sda] Write Protect is off
[ 1.158702] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.158711] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.177475] sda: sda1
[ 1.177791] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.190830] fbcon: i915drmfb (fb0) is primary device
[ 1.190831] fbcon: Deferring console take-over
[ 1.190834] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1.387680] usb 3-3: New USB device found, idVendor=17ef, idProduct=1012, bcdDevice=50.41
[ 1.387682] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.387683] usb 3-3: Product: Lenovo ThinkPad Dock
[ 1.387684] usb 3-3: Manufacturer: LENOVO
[ 1.389266] hub 3-3:1.0: USB hub found
[ 1.389698] hub 3-3:1.0: 4 ports detected
[ 1.440910] tsc: Refined TSC clocksource calibration: 2593.991 MHz
[ 1.440915] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25640fc6114, max_idle_ns: 440795275253 ns
[ 1.440926] clocksource: Switched to clocksource tsc
[ 1.512955] usb 2-3: new high-speed USB device number 3 using xhci_hcd
[ 1.557322] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[ 1.588451] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[ 1.588456] psmouse serio1: synaptics: Trying to set up SMBus access
[ 1.664194] usb 2-3: New USB device found, idVendor=17ef, idProduct=1012, bcdDevice=50.40
[ 1.664196] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.664197] usb 2-3: Product: Lenovo ThinkPad Dock
[ 1.664198] usb 2-3: Manufacturer: LENOVO
[ 1.665102] hub 2-3:1.0: USB hub found
[ 1.665501] hub 2-3:1.0: 4 ports detected
[ 1.800994] usb 2-5: new full-speed USB device number 4 using xhci_hcd
[ 1.958213] usb 2-5: New USB device found, idVendor=058f, idProduct=9540, bcdDevice= 1.20
[ 1.958215] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.958216] usb 2-5: Product: EMV Smartcard Reader
[ 1.958217] usb 2-5: Manufacturer: Generic
[ 2.041193] usb 2-3.2: new full-speed USB device number 5 using xhci_hcd
[ 2.155979] usb 2-3.2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[ 2.155981] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.155982] usb 2-3.2: Product: USB Receiver
[ 2.155983] usb 2-3.2: Manufacturer: Logitech
[ 2.280946] usb 2-6: new full-speed USB device number 6 using xhci_hcd
[ 2.430486] usb 2-6: New USB device found, idVendor=138a, idProduct=0017, bcdDevice= 0.78
[ 2.430488] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.430489] usb 2-6: SerialNumber: 12a69947bea8
[ 2.520994] usb 2-3.3: new full-speed USB device number 7 using xhci_hcd
[ 2.636147] usb 2-3.3: New USB device found, idVendor=04f9, idProduct=01e9, bcdDevice= 1.00
[ 2.636149] usb 2-3.3: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 2.636150] usb 2-3.3: SerialNumber: 000F9N220635
[ 2.760993] usb 2-7: new full-speed USB device number 8 using xhci_hcd
[ 2.910870] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 2.910872] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.000995] usb 2-3.4: new high-speed USB device number 9 using xhci_hcd
[ 3.113507] usb 2-3.4: New USB device found, idVendor=17ef, idProduct=1011, bcdDevice= 0.01
[ 3.113509] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.113510] usb 2-3.4: Product: Lenovo ThinkPad Dock
[ 3.113511] usb 2-3.4: Manufacturer: Lenovo
[ 3.113511] usb 2-3.4: SerialNumber: Rev1.2
[ 3.114322] hub 2-3.4:1.0: USB hub found
[ 3.114362] hub 2-3.4:1.0: 3 ports detected
[ 3.240993] usb 2-8: new high-speed USB device number 10 using xhci_hcd
[ 3.399091] usb 2-8: New USB device found, idVendor=5986, idProduct=0366, bcdDevice=10.19
[ 3.399093] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.399095] usb 2-8: Product: Integrated Camera
[ 3.399095] usb 2-8: Manufacturer: SunplusIT Inc
[ 3.406610] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.415488] usbcore: registered new interface driver usbhid
[ 3.415489] usbhid: USB HID core driver
[ 3.417845] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:1EA7:0066.0001/input/input7
[ 3.477193] hid-generic 0003:1EA7:0066.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Mouse] on usb-0000:00:14.0-2/input0
[ 3.477462] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:1EA7:0066.0002/input/input8
[ 3.477553] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:1EA7:0066.0002/input/input9
[ 3.477646] input: 2.4G Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:1EA7:0066.0002/input/input10
[ 3.480994] usb 2-3.1: new full-speed USB device number 11 using xhci_hcd
[ 3.537171] input: 2.4G Mouse System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:1EA7:0066.0002/input/input11
[ 3.537346] hid-generic 0003:1EA7:0066.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:14.0-2/input1
[ 3.537534] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.0/0003:046D:C534.0003/input/input13
[ 3.597190] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input0
[ 3.597436] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/input/input14
[ 3.597565] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/input/input15
[ 3.654695] usb 2-3.1: New USB device found, idVendor=046d, idProduct=0a29, bcdDevice=76.57
[ 3.654697] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.654698] usb 2-3.1: Product: Logitech Wireless Headset
[ 3.654699] usb 2-3.1: Manufacturer: Logitech
[ 3.654700] usb 2-3.1: SerialNumber: 88C626353A87
[ 3.657139] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/input/input16
[ 3.657284] hid-generic 0003:046D:C534.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input1
[ 3.672547] input: Logitech Logitech Wireless Headset Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.3/0003:046D:0A29.0005/input/input19
[ 3.696997] usb 2-3.4.1: new high-speed USB device number 12 using xhci_hcd
[ 3.729170] input: Logitech Logitech Wireless Headset as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.3/0003:046D:0A29.0005/input/input20
[ 3.729300] hid-generic 0003:046D:0A29.0005: input,hiddev2,hidraw4: USB HID v1.11 Device [Logitech Logitech Wireless Headset] on usb-0000:00:14.0-3.1/input3
[ 3.801257] logitech-djreceiver 0003:046D:C534.0003: hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input0
[ 3.849986] usb 2-3.4.1: New USB device found, idVendor=0c45, idProduct=636b, bcdDevice= 1.00
[ 3.849987] usb 2-3.4.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 3.849989] usb 2-3.4.1: Product: USB 2.0 Camera
[ 3.849990] usb 2-3.4.1: Manufacturer: Sonix Technology Co., Ltd.
[ 3.849990] usb 2-3.4.1: SerialNumber: SN0001
[ 3.977548] logitech-djreceiver 0003:046D:C534.0004: hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input1
[ 4.038096] logitech-djreceiver 0003:046D:C534.0004: device of type eQUAD nano Lite (0x0a) connected on slot 1
[ 4.038575] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/0003:046D:4023.0006/input/input21
[ 4.038693] input: Logitech Wireless Keyboard PID:4023 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/0003:046D:4023.0006/input/input22
[ 4.038766] input: Logitech Wireless Keyboard PID:4023 System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/0003:046D:4023.0006/input/input23
[ 4.038839] hid-generic 0003:046D:4023.0006: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-3.2/input1:1
[ 4.040098] logitech-djreceiver 0003:046D:C534.0004: device of type eQUAD nano Lite (0x0a) connected on slot 2
[ 4.040364] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/0003:046D:4054.0007/input/input28
[ 4.040471] hid-generic 0003:046D:4054.0007: input,hidraw6: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:14.0-3.2/input1:2
[ 4.206360] input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/0003:046D:4023.0006/input/input32
[ 4.206476] logitech-hidpp-device 0003:046D:4023.0006: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-3.2/input1:1
[ 4.340212] logitech-hidpp-device 0003:046D:4054.0007: HID++ 4.5 device connected.
[ 4.748268] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/0003:046D:4054.0007/input/input33
[ 4.748415] logitech-hidpp-device 0003:046D:4054.0007: input,hidraw6: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-3.2/input1:2
[ 5.188085] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.353733] systemd[1]: Inserted module 'autofs4'
[ 5.366520] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.385100] systemd[1]: Detected architecture x86-64.
[ 5.413484] systemd[1]: Set hostname to <Saul>.
[ 5.498453] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 5.515205] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 5.558000] systemd[1]: Created slice system-modprobe.slice.
[ 5.558168] systemd[1]: Created slice User and Session Slice.
[ 5.558218] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.558413] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.558441] systemd[1]: Reached target User and Group Name Lookups.
[ 5.558448] systemd[1]: Reached target Remote File Systems.
[ 5.558458] systemd[1]: Reached target Slices.
[ 5.558550] systemd[1]: Listening on Syslog Socket.
[ 5.558608] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.558647] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 5.558779] systemd[1]: Listening on Journal Audit Socket.
[ 5.558840] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.558911] systemd[1]: Listening on Journal Socket.
[ 5.558977] systemd[1]: Listening on udev Control Socket.
[ 5.559028] systemd[1]: Listening on udev Kernel Socket.
[ 5.559703] systemd[1]: Mounting Huge Pages File System...
[ 5.560527] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.561736] systemd[1]: Mounting Kernel Debug File System...
[ 5.562940] systemd[1]: Mounting Kernel Trace File System...
[ 5.564231] systemd[1]: Starting Journal Service...
[ 5.565414] systemd[1]: Starting Set the console keyboard layout...
[ 5.566571] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 5.566645] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 5.567196] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 5.567228] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 5.569373] systemd[1]: Starting Load Kernel Modules...
[ 5.570419] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.571479] systemd[1]: Starting udev Coldplug all Devices...
[ 5.572536] systemd[1]: Starting Uncomplicated firewall...
[ 5.574123] systemd[1]: Started Read required files in advance.
[ 5.576654] systemd[1]: Mounted Huge Pages File System.
[ 5.576873] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.577079] systemd[1]: Mounted Kernel Debug File System.
[ 5.577241] systemd[1]: Mounted Kernel Trace File System.
[ 5.577831] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 5.578831] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.580713] systemd[1]: Finished Uncomplicated firewall.
[ 5.582808] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 5.583788] systemd[1]: Activating swap /swapfile...
[ 5.587404] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 5.587460] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 5.588291] systemd[1]: Starting Load/Save Random Seed...
[ 5.589337] systemd[1]: Starting Create System Users...
[ 5.594301] lp: driver loaded but no devices found
[ 5.607697] systemd[1]: Finished Load/Save Random Seed.
[ 5.621548] ppdev: user-space parallel port driver
[ 5.623563] systemd[1]: Finished Create System Users.
[ 5.624969] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.625748] systemd[1]: Finished Load Kernel Modules.
[ 5.627092] systemd[1]: Mounting FUSE Control File System...
[ 5.628252] systemd[1]: Mounting Kernel Configuration File System...
[ 5.631598] systemd[1]: Starting Apply Kernel Variables...
[ 5.635254] systemd[1]: Mounted FUSE Control File System.
[ 5.646246] systemd[1]: Mounted Kernel Configuration File System.
[ 5.656939] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 5.658252] systemd[1]: Starting udev Kernel Device Manager...
[ 5.672825] systemd[1]: Finished Apply Kernel Variables.
[ 5.714667] systemd[1]: Started Journal Service.
[ 5.721396] systemd-journald[374]: Received client request to flush runtime journal.
[ 5.736915] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 6.336120] audit: type=1400 audit(1608811062.175:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=479 comm="apparmor_parser"
[ 6.363585] audit: type=1400 audit(1608811062.203:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=483 comm="apparmor_parser"
[ 6.367794] audit: type=1400 audit(1608811062.207:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=480 comm="apparmor_parser"
[ 6.370562] audit: type=1400 audit(1608811062.211:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=478 comm="apparmor_parser"
[ 6.378825] audit: type=1400 audit(1608811062.219:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=502 comm="apparmor_parser"
[ 6.379407] audit: type=1400 audit(1608811062.219:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=496 comm="apparmor_parser"
[ 6.382875] audit: type=1400 audit(1608811062.223:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=504 comm="apparmor_parser"
[ 6.382879] audit: type=1400 audit(1608811062.223:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=504 comm="apparmor_parser"
[ 6.393503] audit: type=1400 audit(1608811062.235:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=509 comm="apparmor_parser"
[ 6.393507] audit: type=1400 audit(1608811062.235:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=509 comm="apparmor_parser"
[ 6.481375] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.489983] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.548630] mc: Linux media interface: v0.10
[ 6.557005] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 6.557007] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.557008] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.557008] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.557009] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 6.569699] Intel(R) Wireless WiFi driver for Linux
[ 6.569701] Copyright(c) 2003- 2015 Intel Corporation
[ 6.618152] videodev: Linux video capture interface: v2.00
[ 6.701003] iwlwifi 0000:03:00.0: Found debug destination: EXTERNAL_DRAM
[ 6.701006] iwlwifi 0000:03:00.0: Found debug configuration: 0
[ 6.701365] iwlwifi 0000:03:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm
[ 6.735030] Non-volatile memory driver v1.3
[ 6.781895] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 6.781896] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.781897] thinkpad_acpi: ThinkPad BIOS JBET54WW (1.19 ), EC JBHT15WW
[ 6.781898] thinkpad_acpi: Lenovo ThinkPad T450s, model 20BWS1U604
[ 6.786870] rmi4_smbus 0-002c: registering SMbus-connected sensor
[ 6.794617] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x4) (20190816/exoparg2-393)
[ 6.794633]
Initialized Local Variables for Method [BFRQ]:
[ 6.794633] Local0: 0000000051d08e2c <Obj> Integer 0000000080000100
[ 6.794639] No Arguments are initialized for method [BFRQ]
[ 6.794643] ACPI Error: Aborting method \_SB.PCI0.LPC.EC.BFRQ due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 6.794650] ACPI Error: Aborting method \_SB.PCI0.VID.LCD0._BCL due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 6.794704] thinkpad_acpi: radio switch found; radios are enabled
[ 6.794722] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 6.794722] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 6.798535] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 6.810636] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.812744] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 6.813463] iwlwifi 0000:03:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 6.822204] iwlwifi 0000:03:00.0: base HW address: 18:5e:0f:8c:73:e1
[ 6.830705] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 6.836148] thinkpad_acpi: battery 2 registered (start 0, stop 100)
[ 6.838367] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 6.838372] battery: new extension: ThinkPad Battery Extension
[ 6.838428] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input34
[ 6.887459] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3053-004, fw id: 1741117
[ 6.890929] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.891349] thermal thermal_zone3: failed to read out thermal zone (-61)
[ 6.914575] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.940968] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0366)
[ 6.959850] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input36
[ 6.959915] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input37
[ 6.959968] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input38
[ 6.960022] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input39
[ 6.960223] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input40
[ 6.977008] input: Synaptics TM3053-004 as /devices/rmi4-00/input/input35
[ 6.983194] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.983197] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.983201] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[ 6.983202] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 6.983203] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 6.983204] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
[ 6.983205] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
[ 6.983206] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 6.987326] serio: RMI4 PS/2 pass-through port at rmi4-00.fn03
[ 7.003002] Bluetooth: Core ver 2.22
[ 7.003020] NET: Registered protocol family 31
[ 7.003021] Bluetooth: HCI device and connection manager initialized
[ 7.003024] Bluetooth: HCI socket layer initialized
[ 7.003027] Bluetooth: L2CAP socket layer initialized
[ 7.003032] Bluetooth: SCO socket layer initialized
[ 7.008695] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input42
[ 7.010546] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:636b)
[ 7.049139] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input43
[ 7.049225] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input44
[ 7.049302] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input45
[ 7.049364] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input46
[ 7.072980] input: USB 2.0 Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.0/input/input47
[ 7.075857] usbcore: registered new interface driver uvcvideo
[ 7.075858] USB Video Class driver (1.1.1)
[ 7.209827] usb 2-3.4.1: 3:1: cannot get freq at ep 0x84
[ 7.219068] usbcore: registered new interface driver snd-usb-audio
[ 7.228197] usbcore: registered new interface driver btusb
[ 7.246015] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 7.260962] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 7.349428] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 7.397931] input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input41
[ 7.552003] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 7.552013] fbcon: Taking over console
[ 7.556452] Console: switching to colour frame buffer device 240x67
[ 7.569007] Bluetooth: hci0: Intel firmware patch completed and activated
[ 8.033147] usb 2-7: USB disconnect, device number 8
[ 8.049729] intel_rapl_common: Found RAPL domain package
[ 8.049730] intel_rapl_common: Found RAPL domain core
[ 8.049731] intel_rapl_common: Found RAPL domain uncore
[ 8.049732] intel_rapl_common: Found RAPL domain dram
[ 8.258714] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 8.356034] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 8.441951] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 8.443366] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[ 8.720571] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.720572] Bluetooth: BNEP filters: protocol multicast
[ 8.720579] Bluetooth: BNEP socket layer initialized
[ 10.541043] usb 2-3.4.1: 3:1: cannot get freq at ep 0x84
[ 10.543636] usb 2-3.4.1: 3:1: cannot get freq at ep 0x84
[ 11.315186] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 11.315215] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 13.415615] vboxdrv: loading out-of-tree module taints kernel.
[ 13.415846] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 13.428994] vboxdrv: Found 4 processor cores
[ 13.453509] vboxdrv: TSC mode is Invariant, tentative frequency 2593990796 Hz
[ 13.453511] vboxdrv: Successfully loaded version 6.1.10_Ubuntu (interface 0x002d0001)
[ 13.462211] VBoxNetFlt: Successfully started.
[ 13.470808] VBoxNetAdp: Successfully started.
[ 18.154285] logitech-hidpp-device 0003:046D:4023.0006: HID++ 2.0 device connected.
[ 23.954119] wlp3s0: authenticate with 2c:3a:fd:fb:f6:55
[ 23.958809] wlp3s0: send auth to 2c:3a:fd:fb:f6:55 (try 1/3)
[ 24.099130] wlp3s0: authenticate with 2c:3a:fd:fb:f6:55
[ 24.099135] wlp3s0: send auth to 2c:3a:fd:fb:f6:55 (try 1/3)
[ 24.155726] wlp3s0: authenticated
[ 24.156930] wlp3s0: associate with 2c:3a:fd:fb:f6:55 (try 1/3)
[ 24.163442] wlp3s0: RX AssocResp from 2c:3a:fd:fb:f6:55 (capab=0x1431 status=0 aid=1)
[ 24.165073] wlp3s0: associated
[ 24.182805] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 2c:3a:fd:fb:f6:55
55
[ 24.210606] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
|
ChickenLipsRfun2eat
Anmeldungsdatum: 6. Dezember 2009
Beiträge: 12067
|
Dein journalctl meldet Probleme mit MPD, der Webcam („kernel: usb 2-3.4.1: 3:1: cannot get freq at ep 0x84“) und CUPS. die SDDM-Meldung kannst du ignorieren (ist das Passwort-Caching oder sowas). Die ACPI-Fehler könnten aber auf die Problematik hindeuten. Hast du das aktuellste UEFI/BIOS-Update installiert? Waren diese Ausgaben nachdem der Bildschirm eingefroren war?
|
Anselm1
(Themenstarter)
Anmeldungsdatum: 6. Januar 2019
Beiträge: 225
|
Erst mal vielen Dank für Deine Antwort auch noch am Feiertag! Nachdem der Bildschirm eingefroren war, ist es mir über "Alt-F" noch gelungen, zwei Terminals zu öffnen und die beiden Programme zu starten. Ich wollte die Ergebnisse dann mit einem Editor speichern, bin aber daran gescheitert, dass ich den Terminal-inhalt nicht mehr markieren und in den Editor verlagern konnte.
Ich habe den Rechner dann erneut gestartet und unmittelbar danach die Daten erneut ausgelesen und hier eingestellt. Die UEFI Bios Version ist JBET54WW (1.19) vom 6.11.2015
Embeded Controler Version JBHT15WW (1.02) Wie man ein Bios Update macht, weiß ich nicht, traue mich auch nicht so recht. Das würde ich nur machen wollen, wenn es unbedingt notwendig ist. Die USB Web-Cam habe ich seit dem Sommer und sie hat bislang zumindest keine erkennbaren Probleme bereitet. Ich habe sie jetzt mal ausgestöpselt, glaube aber nicht, dass die das Problem ist. Die eingebaute Web-CAM benutze ich gar nicht, weil der Rechner an einer Dogging-Station hängt und stets zugeklappt ist. Letzte Woche habe ich die Fritz-Box weitergehend eingerichtet um Faxe senden und empfangen zu können und Roger Router installiert, der ja CUBS benötigt. Möglicherweise ist das Problem erst danach aufgetreten, ich bin aber nicht sicher. AUßerdem habe ich letzte Woche "Myradio" und "Goodvipes" installiert. Die Programme funktionieren, waren aber nicht offen beim Absturz!
|
Anselm1
(Themenstarter)
Anmeldungsdatum: 6. Januar 2019
Beiträge: 225
|
Das Problem ist nun seit mehr als einem Monat nicht mehr aufgetreten, warum auch immer. Durch irgendein update scheint das Problem beseitigt worden zu sein. Ich stelle den thread also mal auf erledigt!
|
Anselm1
(Themenstarter)
Anmeldungsdatum: 6. Januar 2019
Beiträge: 225
|
Hallo, nach mehr als zwei Monaten tritt das Problem seit wenigen Tagen wieder auf und zwar im verstärkten Maße, also mehrfach täglich. journalctl -xep err ergibt nach Neustart: $ journalctl -xeperr
Mär 05 21:58:25 Saul sddm-helper[1382]: gkr-pam: unable to locate daemon control file
Mär 05 21:58:25 Saul systemd[1392]: mpd.socket: Failed to create listening socket ([::]:6600): Address already in use
Mär 05 21:58:25 Saul systemd[1392]: Failed to listen on mpd.socket.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- A start job for unit UNIT has finished with a failure.
--
-- The job identifier is 23 and the job result is failed.
Mär 05 21:58:25 Saul systemd[1392]: Failed to start Music Player Daemon.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- A start job for unit UNIT has finished with a failure.
--
-- The job identifier is 28 and the job result is failed.
Mär 05 21:58:58 Saul systemd[2351]: mpd.socket: Failed to create listening socket ([::]:6600): Address already in use
Mär 05 21:58:58 Saul systemd[2351]: Failed to listen on mpd.socket.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- A start job for unit UNIT has finished with a failure.
--
-- The job identifier is 19 and the job result is failed.
Mär 05 21:58:58 Saul systemd[2351]: Failed to start Music Player Daemon.
-- Subject: A start job for unit UNIT has failed
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
--
-- A start job for unit UNIT has finished with a failure.
--
-- The job identifier is 28 and the job result is failed.
Mär 05 21:59:09 Saul sddm-helper[2400]: gkr-pam: unable to locate daemon control file
lines 2377-2412/2412 (END) ] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[ 0.002938] ACPI: XSDT 0x00000000BCDFE1C0 0000F4 (v01 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.002943] ACPI: FACP 0x00000000BCDF8000 00010C (v05 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.002948] ACPI: DSDT 0x00000000BCDE3000 010F65 (v01 LENOVO TP-JB 00001190 INTL 20120711)
[ 0.002951] ACPI: FACS 0x00000000BCD68000 000040
[ 0.002953] ACPI: SLIC 0x00000000BCDFD000 000176 (v01 LENOVO TP-JB 00001190 PTEC 00000001)
[ 0.002955] ACPI: ASF! 0x00000000BCDFC000 0000A5 (v32 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.002958] ACPI: HPET 0x00000000BCDFB000 000038 (v01 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.002960] ACPI: ECDT 0x00000000BCDFA000 000052 (v01 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.002963] ACPI: APIC 0x00000000BCDF7000 000098 (v01 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.002965] ACPI: MCFG 0x00000000BCDF6000 00003C (v01 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.002968] ACPI: SSDT 0x00000000BCDF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
[ 0.002970] ACPI: SSDT 0x00000000BCDF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
[ 0.002973] ACPI: SSDT 0x00000000BCDE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
[ 0.002975] ACPI: SSDT 0x00000000BCDE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
[ 0.002977] ACPI: SSDT 0x00000000BCDE0000 0006C9 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
[ 0.002980] ACPI: SSDT 0x00000000BCDDF000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711)
[ 0.002982] ACPI: SSDT 0x00000000BCDDE000 000369 (v02 LENOVO CtdpB 00001000 INTL 20120711)
[ 0.002985] ACPI: SSDT 0x00000000BCDDC000 001475 (v01 LENOVO SaSsdt 00003000 INTL 20120711)
[ 0.002988] ACPI: SSDT 0x00000000BCDDB000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711)
[ 0.002990] ACPI: PCCT 0x00000000BCDDA000 00006E (v05 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.002992] ACPI: SSDT 0x00000000BCDD9000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[ 0.002995] ACPI: TCPA 0x00000000BCDD8000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.002998] ACPI: SSDT 0x00000000BCDD7000 0006A3 (v01 Intel_ TpmTable 00001000 INTL 20120711)
[ 0.003000] ACPI: UEFI 0x00000000BCDD6000 000042 (v01 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.003002] ACPI: MSDM 0x00000000BCCB1000 000055 (v03 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.003005] ACPI: BATB 0x00000000BCDD5000 000046 (v01 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.003007] ACPI: FPDT 0x00000000BCDD4000 000064 (v01 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.003010] ACPI: UEFI 0x00000000BCDD3000 0002E2 (v01 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.003012] ACPI: DMAR 0x00000000BCDD2000 0000B0 (v01 LENOVO TP-JB 00001190 PTEC 00000002)
[ 0.003020] ACPI: Local APIC address 0xfee00000
[ 0.003100] No NUMA configuration found
[ 0.003101] Faking a node at [mem 0x0000000000000000-0x000000033dffffff]
[ 0.003111] NODE_DATA(0) allocated [mem 0x33dfd2000-0x33dffcfff]
[ 0.003320] Zone ranges:
[ 0.003321] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.003322] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.003323] Normal [mem 0x0000000100000000-0x000000033dffffff]
[ 0.003324] Device empty
[ 0.003324] Movable zone start for each node
[ 0.003328] Early memory node ranges
[ 0.003328] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.003329] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.003330] node 0: [mem 0x000000001000b000-0x00000000af0a9fff]
[ 0.003331] node 0: [mem 0x0000000100000000-0x000000033dffffff]
[ 0.003467] Zeroed struct page in unavailable ranges: 12229 pages
[ 0.003468] Initmem setup node 0 [mem 0x0000000000001000-0x000000033dffffff]
[ 0.003470] On node 0 totalpages: 3067963
[ 0.003471] DMA zone: 64 pages used for memmap
[ 0.003471] DMA zone: 21 pages reserved
[ 0.003472] DMA zone: 3996 pages, LIFO batch:0
[ 0.003527] DMA32 zone: 11139 pages used for memmap
[ 0.003527] DMA32 zone: 712863 pages, LIFO batch:63
[ 0.013713] Normal zone: 36736 pages used for memmap
[ 0.013714] Normal zone: 2351104 pages, LIFO batch:63
[ 0.042713] Reserving Intel graphics memory at [mem 0xbe000000-0xbfffffff]
[ 0.042975] ACPI: PM-Timer IO Port: 0x1808
[ 0.042976] ACPI: Local APIC address 0xfee00000
[ 0.042983] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.042984] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.042994] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.042996] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.042998] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.042999] ACPI: IRQ0 used by override.
[ 0.043000] ACPI: IRQ9 used by override.
[ 0.043001] Using ACPI (MADT) for SMP configuration information
[ 0.043003] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.043006] TSC deadline timer available
[ 0.043008] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.043023] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.043025] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.043025] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.043026] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.043027] PM: Registered nosave memory: [mem 0x10000000-0x1000afff]
[ 0.043029] PM: Registered nosave memory: [mem 0xaf0aa000-0xbcbfefff]
[ 0.043029] PM: Registered nosave memory: [mem 0xbcbff000-0xbcd7efff]
[ 0.043030] PM: Registered nosave memory: [mem 0xbcd7f000-0xbcdfefff]
[ 0.043030] PM: Registered nosave memory: [mem 0xbcdff000-0xbfffffff]
[ 0.043031] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
[ 0.043031] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.043032] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.043033] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.043033] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.043034] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.043034] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.043035] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.043035] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.043036] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.043036] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.043037] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.043037] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.043038] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.043039] [mem 0xc0000000-0xf7ffffff] available for PCI devices
[ 0.043040] Booting paravirtualized kernel on bare hardware
[ 0.043043] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.043048] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.043276] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
[ 0.043281] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
[ 0.043282] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.043308] Built 1 zonelists, mobility grouping on. Total pages: 3020003
[ 0.043308] Policy zone: Normal
[ 0.043310] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-66-generic root=UUID=f483f88d-b94c-4952-a61b-39ef45ebd664 ro quiet splash vt.handoff=7
[ 0.044614] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.045240] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.045313] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.050276] Calgary: detecting Calgary via BIOS EBDA area
[ 0.050277] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.080153] Memory: 11875012K/12271852K available (14339K kernel code, 2400K rwdata, 4964K rodata, 2732K init, 4968K bss, 396840K reserved, 0K cma-reserved)
[ 0.080159] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.080295] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.080306] Kernel/User page tables isolation: enabled
[ 0.080319] ftrace: allocating 44565 entries in 175 pages
[ 0.097155] rcu: Hierarchical RCU implementation.
[ 0.097157] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.097158] Tasks RCU enabled.
[ 0.097159] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.097159] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.100194] NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16
[ 0.100495] random: crng done (trusting CPU's manufacturer)
[ 0.100515] vt handoff: transparent VT on vt#7
[ 0.100520] Console: colour dummy device 80x25
[ 0.100524] printk: console [tty0] enabled
[ 0.100540] ACPI: Core revision 20190816
[ 0.100699] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.100708] APIC: Switch to symmetric I/O mode setup
[ 0.100710] DMAR: Host address width 39
[ 0.100711] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.100716] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.100717] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.100720] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.100720] DMAR: RMRR base: 0x000000bafcc000 end: 0x000000bafe2fff
[ 0.100721] DMAR: RMRR base: 0x000000bd800000 end: 0x000000bfffffff
[ 0.100723] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.100723] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.100724] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.100724] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.101182] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.101183] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.101790] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.120712] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2563fba2b39, max_idle_ns: 440795251797 ns
[ 0.120716] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.94 BogoMIPS (lpj=10375880)
[ 0.120717] pid_max: default: 32768 minimum: 301
[ 0.120751] LSM: Security Framework initializing
[ 0.120760] Yama: becoming mindful.
[ 0.120799] AppArmor: AppArmor initialized
[ 0.120857] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.120888] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.120902] *** VALIDATE tmpfs ***
[ 0.121041] *** VALIDATE proc ***
[ 0.121087] *** VALIDATE cgroup1 ***
[ 0.121089] *** VALIDATE cgroup2 ***
[ 0.121143] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.121154] process: using mwait in idle threads
[ 0.121157] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.121157] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.121159] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.121160] Spectre V2 : Mitigation: Full generic retpoline
[ 0.121161] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.121161] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.121162] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.121163] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.121164] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.121167] TAA: Mitigation: Clear CPU buffers
[ 0.121168] SRBDS: Mitigation: Microcode
[ 0.121168] MDS: Mitigation: Clear CPU buffers
[ 0.121408] Freeing SMP alternatives memory: 40K
[ 0.124788] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.124905] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.124910] ... version: 3
[ 0.124910] ... bit width: 48
[ 0.124911] ... generic registers: 4
[ 0.124912] ... value mask: 0000ffffffffffff
[ 0.124912] ... max period: 00007fffffffffff
[ 0.124913] ... fixed-purpose events: 3
[ 0.124913] ... event mask: 000000070000000f
[ 0.124945] rcu: Hierarchical SRCU implementation.
[ 0.126000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.126081] smp: Bringing up secondary CPUs ...
[ 0.126167] x86: Booting SMP configuration:
[ 0.126168] .... node #0, CPUs: #1
[ 0.127418] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.127418] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.
[ 0.127418] #2 #3
[ 0.129927] smp: Brought up 1 node, 4 CPUs
[ 0.129927] smpboot: Max logical packages: 2
[ 0.129927] smpboot: Total of 4 processors activated (20751.76 BogoMIPS)
[ 0.130002] devtmpfs: initialized
[ 0.130002] x86/mm: Memory block size: 128MB
[ 0.133326] PM: Registering ACPI NVS region [mem 0xbcbff000-0xbcd7efff] (1572864 bytes)
[ 0.133326] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.133326] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.133326] pinctrl core: initialized pinctrl subsystem
[ 0.133326] PM: RTC time: 20:58:02, date: 2021-03-05
[ 0.133326] NET: Registered protocol family 16
[ 0.133326] audit: initializing netlink subsys (disabled)
[ 0.133326] audit: type=2000 audit(1614977882.032:1): state=initialized audit_enabled=0 res=1
[ 0.133326] EISA bus registered
[ 0.133326] cpuidle: using governor ladder
[ 0.133326] cpuidle: using governor menu
[ 0.133326] Detected 1 PCC Subspaces
[ 0.133326] Registering PCC driver as Mailbox controller
[ 0.133326] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.133326] ACPI: bus type PCI registered
[ 0.133326] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.133326] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.133326] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.133326] PCI: Using configuration type 1 for base access
[ 0.133326] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.133847] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.133847] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.136800] ACPI: Added _OSI(Module Device)
[ 0.136801] ACPI: Added _OSI(Processor Device)
[ 0.136801] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.136802] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.136803] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.136803] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.136804] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.157817] ACPI: 12 ACPI AML tables successfully acquired and loaded
[ 0.158665] ACPI: EC: EC started
[ 0.158666] ACPI: EC: interrupt blocked
[ 0.159788] ACPI: \: Used as first EC
[ 0.159790] ACPI: \: GPE=0x25, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.159790] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.160238] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.165613] ACPI Error: Needed type [Reference], found [Integer] 00000000a4bf1642 (20190816/exresop-66)
[ 0.165619] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20190816/dswexec-431)
[ 0.165624] No Local Variables are initialized for Method [_PDC]
[ 0.165625] Initialized Arguments for Method [_PDC]: (1 arguments defined for method invocation)
[ 0.165625] Arg0: 0000000059617562 <Obj> Buffer(12) 01 00 00 00 01 00 00 00
[ 0.165631] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20190816/psparse-529)
[ 0.166053] ACPI: Dynamic OEM Table Load:
[ 0.166061] ACPI: SSDT 0xFFFF90642FB34000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.167343] ACPI: Dynamic OEM Table Load:
[ 0.167349] ACPI: SSDT 0xFFFF90642F5F7200 000119 (v02 PmRef ApCst 00003000 INTL 20120711)
[ 0.167349] ACPI: Interpreter enabled
[ 0.167349] ACPI: (supports S0 S3 S4 S5)
[ 0.167349] ACPI: Using IOAPIC for interrupt routing
[ 0.167349] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.167349] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.169905] ACPI: Power Resource [PUBS] (on)
[ 0.170040] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.170380] ACPI: Power Resource [NVP3] (on)
[ 0.170406] ACPI: Power Resource [NVP2] (on)
[ 0.174308] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.174417] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
[ 0.174524] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.174631] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
[ 0.174737] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.174816] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.176831] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.176942] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.177055] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.177059] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.177222] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR]
[ 0.177222] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.177222] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.177222] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.177222] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.177222] PCI host bridge to bus 0000:00
[ 0.177222] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.177222] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.177222] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.177222] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.177222] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[ 0.177222] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.177222] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.177222] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.177222] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
[ 0.177222] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.177222] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.177222] pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset
[ 0.177222] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.177222] pci 0000:00:03.0: reg 0x10: [mem 0xe1230000-0xe1233fff 64bit]
[ 0.177270] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.177287] pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit]
[ 0.177338] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.177410] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.177430] pci 0000:00:16.0: reg 0x10: [mem 0xe1239000-0xe123901f 64bit]
[ 0.177492] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.177557] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
[ 0.177572] pci 0000:00:19.0: reg 0x10: [mem 0xe1200000-0xe121ffff]
[ 0.177579] pci 0000:00:19.0: reg 0x14: [mem 0xe123e000-0xe123efff]
[ 0.177585] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
[ 0.177634] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.177704] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.177721] pci 0000:00:1b.0: reg 0x10: [mem 0xe1234000-0xe1237fff 64bit]
[ 0.177772] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.177838] pci 0000:00:1c.0: [8086:9c9a] type 01 class 0x060400
[ 0.177910] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.178052] pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400
[ 0.178132] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.178276] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.178296] pci 0000:00:1d.0: reg 0x10: [mem 0xe123d000-0xe123d3ff]
[ 0.178373] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.178452] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.178623] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.178636] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
[ 0.178642] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
[ 0.178648] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
[ 0.178653] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
[ 0.178659] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.178664] pci 0000:00:1f.2: reg 0x24: [mem 0xe123c000-0xe123c7ff]
[ 0.178694] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.178759] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.178774] pci 0000:00:1f.3: reg 0x10: [mem 0xe1238000-0xe12380ff 64bit]
[ 0.178791] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.178874] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[ 0.178906] pci 0000:00:1f.6: reg 0x10: [mem 0xe123b000-0xe123bfff 64bit]
[ 0.179106] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[ 0.179142] pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1100fff]
[ 0.179297] pci 0000:02:00.0: supports D1 D2
[ 0.179298] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.179432] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.179436] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff]
[ 0.179631] pci 0000:03:00.0: [8086:095b] type 00 class 0x028000
[ 0.179730] pci 0000:03:00.0: reg 0x10: [mem 0xe1000000-0xe1001fff 64bit]
[ 0.180022] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.180444] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.180448] pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe10fffff]
[ 0.181708] ACPI: EC: interrupt unblocked
[ 0.181709] ACPI: EC: event unblocked
[ 0.181716] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.181717] ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events
[ 0.181796] iommu: Default domain type: Translated
[ 0.181796] SCSI subsystem initialized
[ 0.181796] libata version 3.00 loaded.
[ 0.181796] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.181796] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.181796] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.181796] vgaarb: loaded
[ 0.181796] ACPI: bus type USB registered
[ 0.181796] usbcore: registered new interface driver usbfs
[ 0.181796] usbcore: registered new interface driver hub
[ 0.181796] usbcore: registered new device driver usb
[ 0.181796] pps_core: LinuxPPS API ver. 1 registered
[ 0.181796] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.181796] PTP clock support registered
[ 0.181796] EDAC MC: Ver: 3.0.0
[ 0.181796] PCI: Using ACPI for IRQ routing
[ 0.181957] PCI: pci_cache_line_size set to 64 bytes
[ 0.182275] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.182277] e820: reserve RAM buffer [mem 0xaf0aa000-0xafffffff]
[ 0.182277] e820: reserve RAM buffer [mem 0x33e000000-0x33fffffff]
[ 0.182373] NetLabel: Initializing
[ 0.182373] NetLabel: domain hash size = 128
[ 0.182374] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.182386] NetLabel: unlabeled traffic allowed by default
[ 0.185278] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.185281] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.187303] clocksource: Switched to clocksource tsc-early
[ 0.196792] *** VALIDATE bpf ***
[ 0.196870] VFS: Disk quotas dquot_6.6.0
[ 0.196888] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.196909] *** VALIDATE ramfs ***
[ 0.196913] *** VALIDATE hugetlbfs ***
[ 0.196999] AppArmor: AppArmor Filesystem Enabled
[ 0.197028] pnp: PnP ACPI init
[ 0.197596] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.197598] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.197599] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.197600] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[ 0.197601] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.197602] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.197603] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.197604] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.197605] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.197606] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.197607] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.197609] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.197610] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.197611] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.197612] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.197613] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.197615] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.197619] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.197730] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.197746] system 00:01: [io 0x1800-0x189f] has been reserved
[ 0.197747] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.197748] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 0.197750] system 00:01: [io 0x0900-0x097f] has been reserved
[ 0.197751] system 00:01: [io 0x0980-0x09ff] has been reserved
[ 0.197752] system 00:01: [io 0x0a00-0x0a7f] has been reserved
[ 0.197753] system 00:01: [io 0x0a80-0x0aff] has been reserved
[ 0.197754] system 00:01: [io 0x0b00-0x0b7f] has been reserved
[ 0.197755] system 00:01: [io 0x0b80-0x0bff] has been reserved
[ 0.197756] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.197757] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.197758] system 00:01: [io 0x1640-0x165f] has been reserved
[ 0.197760] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.197761] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.197762] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.197763] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.197765] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.197766] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.197769] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.197836] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.197857] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.197873] pnp 00:04: Plug and Play ACPI device, IDs LEN200f PNP0f13 (active)
[ 0.198417] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.198610] system 00:06: [mem 0xc0010000-0xc001ffff] has been reserved
[ 0.198612] system 00:06: [mem 0xc0000000-0xc000ffff] has been reserved
[ 0.198615] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.198654] pnp: PnP ACPI: found 7 devices
[ 0.199757] thermal_sys: Registered thermal governor 'fair_share'
[ 0.199758] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.199758] thermal_sys: Registered thermal governor 'step_wise'
[ 0.199759] thermal_sys: Registered thermal governor 'user_space'
[ 0.199759] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.204244] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.204277] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.204281] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff]
[ 0.204287] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.204290] pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe10fffff]
[ 0.204298] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.204299] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.204300] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.204301] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.204302] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[ 0.204303] pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff]
[ 0.204304] pci_bus 0000:03: resource 1 [mem 0xe1000000-0xe10fffff]
[ 0.204413] NET: Registered protocol family 2
[ 0.204584] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.204689] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.204910] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.205010] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.205070] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.205117] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.205190] NET: Registered protocol family 1
[ 0.205195] NET: Registered protocol family 44
[ 0.205204] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.205682] PCI: CLS 64 bytes, default 64
[ 0.205719] Trying to unpack rootfs image as initramfs...
[ 0.395598] Freeing initrd memory: 78928K
[ 0.412746] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.412748] software IO TLB: mapped [mem 0xab0aa000-0xaf0aa000] (64MB)
[ 0.412925] check: Scanning for low memory corruption every 60 seconds
[ 0.413325] Initialise system trusted keyrings
[ 0.413333] Key type blacklist registered
[ 0.413353] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.414555] zbud: loaded
[ 0.414879] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.415023] fuse: init (API version 7.31)
[ 0.415044] *** VALIDATE fuse ***
[ 0.415046] *** VALIDATE fuse ***
[ 0.415140] Platform Keyring initialized
[ 0.419220] Key type asymmetric registered
[ 0.419221] Asymmetric key parser 'x509' registered
[ 0.419229] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.419264] io scheduler mq-deadline registered
[ 0.419697] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.419744] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.419744] vesafb: scrolling: redraw
[ 0.419745] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.419762] vesafb: framebuffer at 0xd0000000, mapped to 0x00000000ecd6ecdf, using 8128k, total 8128k
[ 0.419793] fbcon: Deferring console take-over
[ 0.419794] fb0: VESA VGA frame buffer device
[ 0.419806] intel_idle: MWAIT substates: 0x11142120
[ 0.419806] intel_idle: v0.4.1 model 0x3D
[ 0.420025] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.420301] ACPI: AC Adapter [AC] (on-line)
[ 0.420352] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.420382] ACPI: Lid Switch [LID]
[ 0.420408] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.420430] ACPI: Sleep Button [SLPB]
[ 0.420473] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.420492] ACPI: Power Button [PWRF]
[ 0.422285] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.422286] ACPI: Thermal Zone [THM0] (48 C)
[ 0.422411] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.424117] Linux agpgart interface v0.103
[ 0.428764] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.435438] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.448239] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 0.487278] loop: module loaded
[ 0.487478] libphy: Fixed MDIO Bus: probed
[ 0.487479] tun: Universal TUN/TAP device driver, 1.6
[ 0.487515] PPP generic driver version 2.4.2
[ 0.487578] VFIO - User Level meta-driver version: 0.3
[ 0.487653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.487656] ehci-pci: EHCI PCI platform driver
[ 0.487797] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.487802] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.487812] ehci-pci 0000:00:1d.0: debug port 2
[ 0.491706] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.491720] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe123d000
[ 0.504771] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.504828] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.504829] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.504830] usb usb1: Product: EHCI Host Controller
[ 0.504831] usb usb1: Manufacturer: Linux 5.4.0-66-generic ehci_hcd
[ 0.504832] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.505022] hub 1-0:1.0: USB hub found
[ 0.505028] hub 1-0:1.0: 3 ports detected
[ 0.505335] ehci-platform: EHCI generic platform driver
[ 0.505352] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.505355] ohci-pci: OHCI PCI platform driver
[ 0.505364] ohci-platform: OHCI generic platform driver
[ 0.505371] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.505496] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.505500] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.506539] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 0.506542] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.506665] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.506666] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.506667] usb usb2: Product: xHCI Host Controller
[ 0.506668] usb usb2: Manufacturer: Linux 5.4.0-66-generic xhci-hcd
[ 0.506669] usb usb2: SerialNumber: 0000:00:14.0
[ 0.506831] hub 2-0:1.0: USB hub found
[ 0.506842] hub 2-0:1.0: 11 ports detected
[ 0.507919] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.507922] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.507924] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.507956] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.507958] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.507958] usb usb3: Product: xHCI Host Controller
[ 0.507959] usb usb3: Manufacturer: Linux 5.4.0-66-generic xhci-hcd
[ 0.507960] usb usb3: SerialNumber: 0000:00:14.0
[ 0.508105] hub 3-0:1.0: USB hub found
[ 0.508111] hub 3-0:1.0: 4 ports detected
[ 0.508664] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.510516] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.510520] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.510761] mousedev: PS/2 mouse device common for all mice
[ 0.511060] rtc_cmos 00:02: RTC can wake from S4
[ 0.511251] rtc_cmos 00:02: registered as rtc0
[ 0.511263] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.511268] i2c /dev entries driver
[ 0.511317] device-mapper: uevent: version 1.0.3
[ 0.511379] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.511396] platform eisa.0: Probing EISA bus 0
[ 0.511397] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.511398] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.511399] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.511400] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.511400] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.511401] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.511402] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.511403] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.511404] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.511404] platform eisa.0: EISA: Detected 0 cards
[ 0.511411] intel_pstate: Intel P-state driver initializing
[ 0.511555] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.511610] drop_monitor: Initializing network drop monitor service
[ 0.511748] NET: Registered protocol family 10
[ 0.512208] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.517513] Segment Routing with IPv6
[ 0.517539] NET: Registered protocol family 17
[ 0.517588] Key type dns_resolver registered
[ 0.517827] RAS: Correctable Errors collector initialized.
[ 0.517855] microcode: sig=0x306d4, pf=0x40, revision=0x2f
[ 0.517921] microcode: Microcode Update Driver: v2.2.
[ 0.517925] IPI shorthand broadcast: enabled
[ 0.517931] sched_clock: Marking stable (517587693, 330149)->(522139658, -4221816)
[ 0.517983] registered taskstats version 1
[ 0.517994] Loading compiled-in X.509 certificates
[ 0.518564] Loaded X.509 cert 'Build time autogenerated kernel key: 81132838e0e3e1d866d3b1e53413495f1f405951'
[ 0.518588] zswap: loaded using pool lzo/zbud
[ 0.518635] Key type ._fscrypt registered
[ 0.518636] Key type .fscrypt registered
[ 0.523797] Key type big_key registered
[ 0.523802] Key type trusted registered
[ 0.526288] Key type encrypted registered
[ 0.526291] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.526299] ima: Allocated hash algorithm: sha1
[ 0.644834] ima: No architecture policies found
[ 0.644847] evm: Initialising EVM extended attributes:
[ 0.644848] evm: security.selinux
[ 0.644848] evm: security.SMACK64
[ 0.644849] evm: security.SMACK64EXEC
[ 0.644849] evm: security.SMACK64TRANSMUTE
[ 0.644849] evm: security.SMACK64MMAP
[ 0.644850] evm: security.apparmor
[ 0.644850] evm: security.ima
[ 0.644851] evm: security.capability
[ 0.644851] evm: HMAC attrs: 0x1
[ 0.645337] PM: Magic number: 13:919:1002
[ 0.645390] i8042 aux 00:04: hash matches
[ 0.645414] memory memory41: hash matches
[ 0.645468] rtc_cmos 00:02: setting system clock to 2021-03-05T20:58:02 UTC (1614977882)
[ 0.646424] Freeing unused decrypted memory: 2040K
[ 0.646815] Freeing unused kernel image memory: 2732K
[ 0.646855] Write protecting the kernel read-only data: 22528k
[ 0.647207] Freeing unused kernel image memory: 2008K
[ 0.647380] Freeing unused kernel image memory: 1180K
[ 0.655002] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.655003] x86/mm: Checking user space page tables
[ 0.662497] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.662498] Run /init as init process
[ 0.765860] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.765861] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.766032] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.766474] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 0.766494] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.766745] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 0.766815] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 0.767474] ahci 0000:00:1f.2: version 3.0
[ 0.767547] ahci 0000:00:1f.2: BIOS update required for Link Power Management support
[ 0.771084] cryptd: max_cpu_qlen set to 1000
[ 0.776678] AVX2 version of gcm_enc/dec engaged.
[ 0.776678] AES CTR mode by8 optimization enabled
[ 0.780737] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[ 0.780740] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.781145] scsi host0: ahci
[ 0.785777] scsi host1: ahci
[ 0.785892] scsi host2: ahci
[ 0.785947] ata1: SATA max UDMA/133 abar m2048@0xe123c000 port 0xe123c100 irq 47
[ 0.785948] ata2: DUMMY
[ 0.785950] ata3: DUMMY
[ 0.835857] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 0.835858] fb0: switching to inteldrmfb from VESA VGA
[ 0.835910] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 0.840751] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.840887] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 0.844764] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.844766] [drm] Driver supports precise vblank timestamp query.
[ 0.844799] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.851882] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 0.889594] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 0.903014] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 0.903066] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x4) (20190816/exoparg2-393)
[ 0.903075]
Initialized Local Variables for Method [BFRQ]:
[ 0.903076] Local0: 00000000f5e2eb2e <Obj> Integer 0000000080000100
[ 0.903080] No Arguments are initialized for method [BFRQ]
[ 0.903082] ACPI Error: Aborting method \_SB.PCI0.LPC.EC.BFRQ due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.903086] ACPI Error: Aborting method \_SB.PCI0.VID.LCD0._BCL due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 0.903238] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 0.922466] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:7b:9d:81:51:b7
[ 0.922468] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.922489] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[ 0.923297] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.009163] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[ 1.009164] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.009294] hub 1-1:1.0: USB hub found
[ 1.009411] hub 1-1:1.0: 8 ports detected
[ 1.104745] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.106125] ata1.00: LPM support broken, forcing max_power
[ 1.107668] usb 3-3: New USB device found, idVendor=17ef, idProduct=1012, bcdDevice=50.41
[ 1.107670] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.107672] usb 3-3: Product: Lenovo ThinkPad Dock
[ 1.107673] usb 3-3: Manufacturer: LENOVO
[ 1.108215] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.108217] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.109530] hub 3-3:1.0: USB hub found
[ 1.109945] hub 3-3:1.0: 4 ports detected
[ 1.114808] ata1.00: ATA-9: Intenso SSD SATAIII, R1001A0, max UDMA/133
[ 1.114810] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.119322] ata1.00: LPM support broken, forcing max_power
[ 1.121485] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.121488] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.128082] ata1.00: configured for UDMA/133
[ 1.138299] scsi 0:0:0:0: Direct-Access ATA Intenso SSD SATA 1A0 PQ: 0 ANSI: 5
[ 1.138513] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.138583] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 1.138597] sd 0:0:0:0: [sda] Write Protect is off
[ 1.138598] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.138620] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.161351] sda: sda1
[ 1.161630] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.162627] fbcon: i915drmfb (fb0) is primary device
[ 1.162628] fbcon: Deferring console take-over
[ 1.162630] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1.236747] usb 2-2: new full-speed USB device number 2 using xhci_hcd
[ 1.386985] usb 2-2: New USB device found, idVendor=1ea7, idProduct=0066, bcdDevice= 2.00
[ 1.386987] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.386989] usb 2-2: Product: 2.4G Mouse
[ 1.444775] tsc: Refined TSC clocksource calibration: 2593.990 MHz
[ 1.444782] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25640ebfed9, max_idle_ns: 440795320785 ns
[ 1.444806] clocksource: Switched to clocksource tsc
[ 1.512810] usb 2-3: new high-speed USB device number 3 using xhci_hcd
[ 1.553376] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[ 1.584397] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[ 1.584402] psmouse serio1: synaptics: Trying to set up SMBus access
[ 1.663733] usb 2-3: New USB device found, idVendor=17ef, idProduct=1012, bcdDevice=50.40
[ 1.663735] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.663736] usb 2-3: Product: Lenovo ThinkPad Dock
[ 1.663737] usb 2-3: Manufacturer: LENOVO
[ 1.664683] hub 2-3:1.0: USB hub found
[ 1.664984] hub 2-3:1.0: 4 ports detected
[ 1.800746] usb 2-5: new full-speed USB device number 4 using xhci_hcd
[ 1.957822] usb 2-5: New USB device found, idVendor=058f, idProduct=9540, bcdDevice= 1.20
[ 1.957823] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.957824] usb 2-5: Product: EMV Smartcard Reader
[ 1.957825] usb 2-5: Manufacturer: Generic
[ 2.040816] usb 2-3.2: new full-speed USB device number 5 using xhci_hcd
[ 2.155479] usb 2-3.2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[ 2.155481] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.155482] usb 2-3.2: Product: USB Receiver
[ 2.155482] usb 2-3.2: Manufacturer: Logitech
[ 2.280755] usb 2-6: new full-speed USB device number 6 using xhci_hcd
[ 2.430199] usb 2-6: New USB device found, idVendor=138a, idProduct=0017, bcdDevice= 0.78
[ 2.430201] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.430202] usb 2-6: SerialNumber: 12a69947bea8
[ 2.520813] usb 2-3.3: new full-speed USB device number 7 using xhci_hcd
[ 2.635685] usb 2-3.3: New USB device found, idVendor=04f9, idProduct=01e9, bcdDevice= 1.00
[ 2.635687] usb 2-3.3: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 2.635688] usb 2-3.3: SerialNumber: 000F9N220635
[ 2.760815] usb 2-7: new full-speed USB device number 8 using xhci_hcd
[ 2.910579] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 2.910581] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.000812] usb 2-3.4: new high-speed USB device number 9 using xhci_hcd
[ 3.113157] usb 2-3.4: New USB device found, idVendor=17ef, idProduct=1011, bcdDevice= 0.01
[ 3.113159] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.113160] usb 2-3.4: Product: Lenovo ThinkPad Dock
[ 3.113161] usb 2-3.4: Manufacturer: Lenovo
[ 3.113162] usb 2-3.4: SerialNumber: Rev1.2
[ 3.113937] hub 2-3.4:1.0: USB hub found
[ 3.113995] hub 2-3.4:1.0: 3 ports detected
[ 3.240810] usb 2-8: new high-speed USB device number 10 using xhci_hcd
[ 3.398731] usb 2-8: New USB device found, idVendor=5986, idProduct=0366, bcdDevice=10.19
[ 3.398733] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.398734] usb 2-8: Product: Integrated Camera
[ 3.398735] usb 2-8: Manufacturer: SunplusIT Inc
[ 3.406024] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.415011] usbcore: registered new interface driver usbhid
[ 3.415013] usbhid: USB HID core driver
[ 3.417374] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:1EA7:0066.0001/input/input7
[ 3.477027] hid-generic 0003:1EA7:0066.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Mouse] on usb-0000:00:14.0-2/input0
[ 3.477321] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:1EA7:0066.0002/input/input8
[ 3.477417] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:1EA7:0066.0002/input/input9
[ 3.477594] input: 2.4G Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:1EA7:0066.0002/input/input10
[ 3.484812] usb 2-3.1: new full-speed USB device number 11 using xhci_hcd
[ 3.537007] input: 2.4G Mouse System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:1EA7:0066.0002/input/input11
[ 3.537202] hid-generic 0003:1EA7:0066.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:14.0-2/input1
[ 3.537399] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.0/0003:046D:C534.0003/input/input13
[ 3.597027] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input0
[ 3.597307] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/input/input14
[ 3.597486] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/input/input15
[ 3.657003] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/input/input16
[ 3.657184] hid-generic 0003:046D:C534.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input1
[ 3.657980] usb 2-3.1: New USB device found, idVendor=046d, idProduct=0a29, bcdDevice=76.57
[ 3.657982] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.657983] usb 2-3.1: Product: Logitech Wireless Headset
[ 3.657985] usb 2-3.1: Manufacturer: Logitech
[ 3.657986] usb 2-3.1: SerialNumber: 88C626353A87
[ 3.673640] input: Logitech Logitech Wireless Headset Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.3/0003:046D:0A29.0005/input/input19
[ 3.732922] input: Logitech Logitech Wireless Headset as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.3/0003:046D:0A29.0005/input/input20
[ 3.733101] hid-generic 0003:046D:0A29.0005: input,hiddev2,hidraw4: USB HID v1.11 Device [Logitech Logitech Wireless Headset] on usb-0000:00:14.0-3.1/input3
[ 3.801175] logitech-djreceiver 0003:046D:C534.0003: hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input0
[ 3.957166] logitech-djreceiver 0003:046D:C534.0004: hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input1
[ 4.018370] logitech-djreceiver 0003:046D:C534.0004: device of type eQUAD nano Lite (0x0a) connected on slot 1
[ 4.018872] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/0003:046D:4023.0006/input/input21
[ 4.018988] input: Logitech Wireless Keyboard PID:4023 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/0003:046D:4023.0006/input/input22
[ 4.019055] input: Logitech Wireless Keyboard PID:4023 System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/0003:046D:4023.0006/input/input23
[ 4.019122] hid-generic 0003:046D:4023.0006: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-3.2/input1:1
[ 4.020369] logitech-djreceiver 0003:046D:C534.0004: device of type eQUAD nano Lite (0x0a) connected on slot 2
[ 4.020552] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/0003:046D:4054.0007/input/input28
[ 4.020633] hid-generic 0003:046D:4054.0007: input,hidraw6: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:14.0-3.2/input1:2
[ 4.174637] input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/0003:046D:4023.0006/input/input32
[ 4.174752] logitech-hidpp-device 0003:046D:4023.0006: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-3.2/input1:1
[ 4.222545] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0004/0003:046D:4054.0007/input/input33
[ 4.222684] logitech-hidpp-device 0003:046D:4054.0007: input,hidraw6: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-3.2/input1:2
[ 4.666354] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.836087] systemd[1]: Inserted module 'autofs4'
[ 4.850050] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 4.868926] systemd[1]: Detected architecture x86-64.
[ 4.890266] systemd[1]: Set hostname to <Saul>.
[ 4.977054] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 4.994003] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 5.039440] systemd[1]: Created slice system-modprobe.slice.
[ 5.039611] systemd[1]: Created slice User and Session Slice.
[ 5.039661] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.039858] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.039886] systemd[1]: Reached target User and Group Name Lookups.
[ 5.039896] systemd[1]: Reached target Remote File Systems.
[ 5.039906] systemd[1]: Reached target Slices.
[ 5.040896] systemd[1]: Listening on Syslog Socket.
[ 5.040963] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.041019] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 5.041180] systemd[1]: Listening on Journal Audit Socket.
[ 5.041253] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.041347] systemd[1]: Listening on Journal Socket.
[ 5.041428] systemd[1]: Listening on udev Control Socket.
[ 5.041488] systemd[1]: Listening on udev Kernel Socket.
[ 5.042254] systemd[1]: Mounting Huge Pages File System...
[ 5.043079] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.044257] systemd[1]: Mounting Kernel Debug File System...
[ 5.045480] systemd[1]: Mounting Kernel Trace File System...
[ 5.046712] systemd[1]: Starting Journal Service...
[ 5.047870] systemd[1]: Starting Set the console keyboard layout...
[ 5.049015] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 5.049078] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 5.049659] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 5.049759] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 5.051408] systemd[1]: Starting Load Kernel Modules...
[ 5.052436] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.053615] systemd[1]: Starting udev Coldplug all Devices...
[ 5.055290] systemd[1]: Starting Uncomplicated firewall...
[ 5.057018] systemd[1]: Started Read required files in advance.
[ 5.060598] systemd[1]: Mounted Huge Pages File System.
[ 5.061346] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.061858] systemd[1]: Mounted Kernel Debug File System.
[ 5.061986] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.063404] systemd[1]: Mounted Kernel Trace File System.
[ 5.063967] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 5.064520] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 5.065082] systemd[1]: Finished Uncomplicated firewall.
[ 5.066014] systemd[1]: Activating swap /swapfile...
[ 5.068128] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 5.068195] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 5.071596] systemd[1]: Starting Load/Save Random Seed...
[ 5.072880] systemd[1]: Starting Create System Users...
[ 5.083728] lp: driver loaded but no devices found
[ 5.094834] systemd[1]: Finished Load/Save Random Seed.
[ 5.103205] ppdev: user-space parallel port driver
[ 5.117997] systemd[1]: Finished Load Kernel Modules.
[ 5.119290] systemd[1]: Mounting FUSE Control File System...
[ 5.120456] systemd[1]: Mounting Kernel Configuration File System...
[ 5.124072] systemd[1]: Starting Apply Kernel Variables...
[ 5.127425] systemd[1]: Mounted FUSE Control File System.
[ 5.128516] systemd[1]: Mounted Kernel Configuration File System.
[ 5.141750] systemd[1]: Finished Create System Users.
[ 5.143800] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.174864] systemd[1]: Finished udev Coldplug all Devices.
[ 5.181709] systemd[1]: Finished Apply Kernel Variables.
[ 5.195311] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 5.196379] systemd[1]: Starting udev Kernel Device Manager...
[ 5.196477] systemd[1]: Started Journal Service.
[ 5.204004] systemd-journald[418]: Received client request to flush runtime journal.
[ 5.204867] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 5.959855] audit: type=1400 audit(1614977887.807:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=530 comm="apparmor_parser"
[ 5.969674] audit: type=1400 audit(1614977887.819:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=536 comm="apparmor_parser"
[ 5.969679] audit: type=1400 audit(1614977887.819:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=529 comm="apparmor_parser"
[ 5.971331] audit: type=1400 audit(1614977887.819:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=531 comm="apparmor_parser"
[ 5.974222] audit: type=1400 audit(1614977887.823:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=538 comm="apparmor_parser"
[ 5.979121] audit: type=1400 audit(1614977887.827:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=539 comm="apparmor_parser"
[ 5.980185] audit: type=1400 audit(1614977887.827:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=540 comm="apparmor_parser"
[ 5.980189] audit: type=1400 audit(1614977887.827:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=540 comm="apparmor_parser"
[ 5.981063] audit: type=1400 audit(1614977887.831:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=542 comm="apparmor_parser"
[ 5.981066] audit: type=1400 audit(1614977887.831:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=542 comm="apparmor_parser"
[ 6.138325] Non-volatile memory driver v1.3
[ 6.168677] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.170190] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.199823] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 6.199825] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.199826] thinkpad_acpi: ThinkPad BIOS JBET54WW (1.19 ), EC JBHT15WW
[ 6.199827] thinkpad_acpi: Lenovo ThinkPad T450s, model 20BWS1U604
[ 6.202480] ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x4) (20190816/exoparg2-393)
[ 6.202496]
Initialized Local Variables for Method [BFRQ]:
[ 6.202497] Local0: 00000000d8687d77 <Obj> Integer 0000000080000100
[ 6.202504] No Arguments are initialized for method [BFRQ]
[ 6.202508] ACPI Error: Aborting method \_SB.PCI0.LPC.EC.BFRQ due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 6.202515] ACPI Error: Aborting method \_SB.PCI0.VID.LCD0._BCL due to previous error (AE_AML_PACKAGE_LIMIT) (20190816/psparse-529)
[ 6.202577] thinkpad_acpi: radio switch found; radios are enabled
[ 6.202596] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 6.202596] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 6.229142] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.244405] mc: Linux media interface: v0.10
[ 6.251540] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 6.263692] Intel(R) Wireless WiFi driver for Linux
[ 6.263693] Copyright(c) 2003- 2015 Intel Corporation
[ 6.271899] videodev: Linux video capture interface: v2.00
[ 6.282394] thinkpad_acpi: battery 2 registered (start 0, stop 100)
[ 6.285617] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 6.285622] battery: new extension: ThinkPad Battery Extension
[ 6.285687] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input34
[ 6.297398] iwlwifi 0000:03:00.0: Found debug destination: EXTERNAL_DRAM
[ 6.297401] iwlwifi 0000:03:00.0: Found debug configuration: 0
[ 6.297757] iwlwifi 0000:03:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm
[ 6.321999] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.352946] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input35
[ 6.353035] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input36
[ 6.353111] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input37
[ 6.353167] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input38
[ 6.353219] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input39
[ 6.373634] Bluetooth: Core ver 2.22
[ 6.373657] NET: Registered protocol family 31
[ 6.373658] Bluetooth: HCI device and connection manager initialized
[ 6.373661] Bluetooth: HCI socket layer initialized
[ 6.373663] Bluetooth: L2CAP socket layer initialized
[ 6.373668] Bluetooth: SCO socket layer initialized
[ 6.388621] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.388624] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.388625] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[ 6.388626] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 6.388628] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 6.388629] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
[ 6.388631] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
[ 6.388632] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 6.402068] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 6.421899] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 6.422550] iwlwifi 0000:03:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 6.430714] iwlwifi 0000:03:00.0: base HW address: 18:5e:0f:8c:73:e1
[ 6.448626] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input40
[ 6.448699] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input41
[ 6.449027] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input42
[ 6.449086] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input43
[ 6.464973] rmi4_smbus 0-002c: registering SMbus-connected sensor
[ 6.499515] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.499909] thermal thermal_zone2: failed to read out thermal zone (-61)
[ 6.598581] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0366)
[ 6.599269] usbcore: registered new interface driver btusb
[ 6.618298] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 6.632372] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 6.644170] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input45
[ 6.644451] usbcore: registered new interface driver uvcvideo
[ 6.644452] USB Video Class driver (1.1.1)
[ 6.647860] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3053-004, fw id: 1741117
[ 6.649342] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 6.649344] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.649345] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.649345] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.649346] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 6.713567] input: Synaptics TM3053-004 as /devices/rmi4-00/input/input44
[ 6.718654] serio: RMI4 PS/2 pass-through port at rmi4-00.fn03
[ 6.841267] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 6.858277] Bluetooth: hci0: Intel firmware patch completed and activated
[ 7.073777] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 7.122341] input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input46
[ 7.145159] usbcore: registered new interface driver snd-usb-audio
[ 7.256051] fbcon: Taking over console
[ 7.306719] Console: switching to colour frame buffer device 240x67
[ 7.854956] usb 2-7: USB disconnect, device number 8
[ 8.297958] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 8.401555] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 8.461072] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.461073] Bluetooth: BNEP filters: protocol multicast
[ 8.461081] Bluetooth: BNEP socket layer initialized
[ 8.488889] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 8.490285] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[ 8.508338] intel_rapl_common: Found RAPL domain package
[ 8.508340] intel_rapl_common: Found RAPL domain core
[ 8.508341] intel_rapl_common: Found RAPL domain uncore
[ 8.508342] intel_rapl_common: Found RAPL domain dram
[ 11.422987] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 11.423018] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 13.501245] vboxdrv: loading out-of-tree module taints kernel.
[ 13.501463] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 13.513588] vboxdrv: Found 4 processor cores
[ 13.536917] vboxdrv: TSC mode is Invariant, tentative frequency 2593989560 Hz
[ 13.536918] vboxdrv: Successfully loaded version 6.1.16_Ubuntu (interface 0x00300000)
[ 13.545502] VBoxNetFlt: Successfully started.
[ 13.553149] VBoxNetAdp: Successfully started.
[ 14.650656] logitech-hidpp-device 0003:046D:4054.0007: HID++ 4.5 device connected.
[ 17.218559] logitech-hidpp-device 0003:046D:4023.0006: HID++ 2.0 device connected.
[ 24.954658] wlp3s0: authenticate with 2c:3a:fd:fb:f6:55
[ 24.958575] wlp3s0: send auth to 2c:3a:fd:fb:f6:55 (try 1/3)
[ 25.093180] wlp3s0: authenticate with 2c:3a:fd:fb:f6:55
[ 25.093187] wlp3s0: send auth to 2c:3a:fd:fb:f6:55 (try 1/3)
[ 25.149153] wlp3s0: authenticated
[ 25.156764] wlp3s0: associate with 2c:3a:fd:fb:f6:55 (try 1/3)
[ 25.162440] wlp3s0: RX AssocResp from 2c:3a:fd:fb:f6:55 (capab=0x1431 status=0 aid=2)
[ 25.181003] wlp3s0: associated
[ 25.269887] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 2c:3a:fd:fb:f6:55
[ 25.270437] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 54.910575] wlp3s0: deauthenticating from 2c:3a:fd:fb:f6:55 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 72.420681] wlp3s0: authenticate with 2c:3a:fd:fb:f6:55
[ 72.432972] wlp3s0: send auth to 2c:3a:fd:fb:f6:55 (try 1/3)
[ 72.565339] wlp3s0: authenticate with 2c:3a:fd:fb:f6:55
[ 72.565344] wlp3s0: send auth to 2c:3a:fd:fb:f6:55 (try 1/3)
[ 72.621734] wlp3s0: authenticated
[ 72.625091] wlp3s0: associate with 2c:3a:fd:fb:f6:55 (try 1/3)
[ 72.631745] wlp3s0: RX AssocResp from 2c:3a:fd:fb:f6:55 (capab=0x1431 status=0 aid=2)
[ 72.646338] wlp3s0: associated
[ 72.658921] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 2c:3a:fd:fb:f6:55
[ 72.678064] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 280.701859] kauditd_printk_skb: 36 callbacks suppressed
[ 280.701860] audit: type=1400 audit(1614978162.692:48): apparmor="DENIED" operation="capable" profile="/snap/core/10859/usr/lib/snapd/snap-confine" pid=4173 comm="snap-confine" capability=4 capname="fsetid"
[ 283.304127] audit: type=1400 audit(1614978165.296:49): apparmor="DENIED" operation="mkdir" profile="snap.brave.brave" name="/etc/brave/" pid=4284 comm="brave" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 283.495346] audit: type=1400 audit(1614978165.488:50): apparmor="DENIED" operation="mkdir" profile="snap.brave.brave" name="/etc/brave/" pid=4287 comm="brave" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 283.496008] audit: type=1400 audit(1614978165.488:51): apparmor="DENIED" operation="mkdir" profile="snap.brave.brave" name="/etc/brave/" pid=4289 comm="brave" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 285.115745] audit: type=1107 audit(1614978167.108:52): pid=770 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/" interface="org.freedesktop.DBus.ObjectManager" member="GetManagedObjects" mask="send" name="org.bluez" pid=4284 label="snap.brave.brave" peer_pid=1056 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 285.823487] audit: type=1400 audit(1614978167.816:53): apparmor="DENIED" operation="mkdir" profile="snap.brave.brave" name="/etc/brave/" pid=4314 comm="brave" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 290.830083] audit: type=1400 audit(1614978172.820:54): apparmor="DENIED" operation="open" profile="snap.brave.brave" name="/run/udev/data/c238:0" pid=4284 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 290.858338] audit: type=1400 audit(1614978172.848:55): apparmor="DENIED" operation="open" profile="snap.brave.brave" name="/run/udev/data/c239:0" pid=4284 comm="ThreadPoolForeg" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 480.861120] audit: type=1400 audit(1614978362.848:56): apparmor="DENIED" operation="mkdir" profile="snap.brave.brave" name="/etc/brave/" pid=4908 comm="brave" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 480.919837] audit: type=1400 audit(1614978362.908:57): apparmor="DENIED" operation="mkdir" profile="snap.brave.brave" name="/etc/brave/" pid=4911 comm="brave" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 480.919842] audit: type=1400 audit(1614978362.908:58): apparmor="DENIED" operation="mkdir" profile="snap.brave.brave" name="/etc/brave/" pid=4912 comm="brave" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 481.113090] audit: type=1107 audit(1614978363.100:59): pid=770 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/" interface="org.freedesktop.DBus.ObjectManager" member="GetManagedObjects" mask="send" name="org.bluez" pid=4908 label="snap.brave.brave" peer_pid=1056 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' ich kann dann zwar noch mit ALT F2 eine Kommandozeile öffnen und eine Konsole starten, mehr aber nicht. Auch lässt sich die Ausgabe der hier genannten Befehle dann nicht mehr speichern. Zudem ist nach dem ersten Neustart (shutdown -r now) der Bildschirmhintergrund schwarz!
Wer weiß Rat?
|
Anselm1
(Themenstarter)
Anmeldungsdatum: 6. Januar 2019
Beiträge: 225
|
Ihkann nun ergänzen: Der Rechner läuft stabil. Es ist sicher kein Temperaturproblem. Es stürzt die Benutzeroberfläche ab. Ich habe die Graphikanforderungen minimiert. Seither tritt es seltener auf.
Gebe ich in einem Terminal ein:
killall -9 plasmashell; kstart5 plasmashell & dann hilft das meistens, aber nicht immer!
|
ChickenLipsRfun2eat
Anmeldungsdatum: 6. Dezember 2009
Beiträge: 12067
|
Hallo! Es ist nett, dass du uns hier auf dem Laufenden hälst, aber es wäre besser, du würdest dich der Probleme annehmen und dazu etwas schreiben. Was ist aus den BIOS/UEFI-Einstellungen geworden bezüglich des Energiesparmodus? Was hast du im Fall ACPI versucht? Bootoptionen? Was sagt das journal, wenn die Plasmashell hängt? Welche Grafikkarte ist denn verbaut? btw: kquitapp5 plasmashell wäre besser als killall -9 .
|
Anselm1
(Themenstarter)
Anmeldungsdatum: 6. Januar 2019
Beiträge: 225
|
Ich habe im Bios "cpu Power Management" und
"Power On with AC attach auf disabeld" gestellt. Seither stürzt die Benutzeroberfläche nicht mehr ab und auch mein weitere Problem, dass beim wechseln meiner beiden Benutzer der Bildschirm schwarz wird, tritt nicht mehr auf; außer wenn ich es über die Tastenkombination ALT_contr. F1 bzw. F2 versuche und selbst das ist weniger fehleranfällig.
|