ubuntuusers.de

Hallo,

ist es irgendwie möglich Pavucontrol beizubringen, das es Spotify immer im "Simultaneus Output" gestartet wird und nicht jedes mal zuerst über den "normalen" Soundkarten Kanal? Momentan muss ich das nachdem ich Spotify gestartet habe jedes mal wieder von Hand umstellen.

Ich benötige diesen Simultaneous-Output für Spotify, damit ich die Musik per Stream2ip auf meinen Audio-Receiver hören kann und zum streamen in OBS. In beiden Fällen soll nur die Musik gesendet werden und nicht der kompletten Systemsound. ☺

Vielen Dank schon mal im voraus.

VG, Silentbob

pacmd move-sink-input x y

Probier es mal aus. Das ist schon PA Magie! 👍

Bestimmt ganz einfach, wenn man weiß wie. Den Input Sink kann man auch über den Namen ermitteln.

Hallo hakel,

vielen Dank für die Antwort!

Ich habe die richtigen Zahlen ausfindig gemacht und die Umstellung hat damit auch funktioniert. Allerdings nicht permanent, sondern nur bis zum nächsten Systemstart. Danach haben sich leider auch die Entinitäten also die Zahlen wieder geändert, so das man den selben Befehl leider kein zweites mal eingeben kann ohne die Nummern vorher wieder ausfindig zu machen. ☹

Vg, Sientbob

Hört sich doch schon mal gut an.

Mach dir ein Startscript mit dem du Spotify öffnest.

Danach haben sich leider auch die Entinitäten also die Zahlen

Du kannst die Zahl auch "per Name" also Spotify ermitteln.

Komisch, daß sich noch kein Wissender gemeldet hat. Das ist doch eine interessante Anwendung für PA.

Danke, das ist eine sehr gute Idee! Weißt Du zufällig auf die Schnelle, wie ich den genauen Namen von Spotify ermitteln kann? Ich weiß gerade nicht genau wonach ich da suchen muss. ☹ Mit "Spotify" oder "spotify" funktioniert es leider nicht. Bisher habe ich die sinks und Entinitäten mit "pactl list short sink-inputs" ermittelt.

Ansonsten klingt die Lösung mit dem Startskript sehr funktional, worüber ich mich sehr freue. ☺

VG, Silentbob

Hallo Hakel,

okay, die Entinität als Name einzugeben ist scheinbar nicht vorgesehen. Ich habe verschiedene Schreibweisen ausprobiert. Man müsste wie Du gesagt hast für das Startskript wohl die Nummer der Entinität per Name ermitteln, aber so gut sind meine Skript-Kenntnisse leider nicht. Ich werde mich aber in ruhiger Stunde noch mal damit beschäftigen.

Trotzdem noch mal Danke für die Hilfe. ☺

VG, Silentbob

Versuche mal im Terminal ob der Befehl greift nachdem du Spotify gestartet hast

pacmd set-default-sink combined

Der Befehl greift insofern schon, dass der komplette Output auf Simultaneous umgestellt wird. Allerdings bleibt Spotify davon unbetroffen und (nach manueller Umstellung) nach einem Programmneustart wie zuvor auf den normalen Soundkarten-Kanal gestellt und nicht auf Simultaneous. ☹

Btw. ich befürchte die erste Lösung mit dem Startskript wird nicht richtig funktionieren, weil der Input-Sink von Spotify leider erst dann erstellt wird, wenn man auf den Play-Button gedrückt hat.

VG, Silentbob

p.s. Wenns nicht klappt ist es auch kein Weltuntergang, aber ich habe bei meinem Ubuntu immer einen leichten Hang zur Perfektion 😀 und das wäre schon sehr cool. ☺

Zeige mal die Ausgabe von

pacmd ls

wenn alles so läuft wie gewünscht,vielleicht kommt dann eine Idee ☺

Das wäre toll! ☺ Hier die gewünschte Ausgabe nach einem Systemneustart ohne jegliche Umstellung bei geöffnetem Spotify:

peter@linux:~$ pacmd ls
Memory blocks currently allocated: 68, size: 626,4 KiB.
Memory blocks allocated during the whole lifetime: 1834, size: 25,3 MiB.
Memory blocks imported from other processes: 66, size: 528,0 KiB.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 34,5 KiB.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_03_06.0.analog-stereo
Default source name: alsa_input.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00.analog-stereo
Memory blocks of type POOL: 1 allocated/899 accumulated.
Memory blocks of type POOL_EXTERNAL: 1 allocated/1 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/375 accumulated.
Memory blocks of type IMPORTED: 66 allocated/560 accumulated.
34 module(s) loaded.
    index: 0
	name: <module-device-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute state of devices"
		module.version = "11.1"
    index: 1
	name: <module-stream-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.version = "11.1"
    index: 2
	name: <module-card-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore profile of cards"
		module.version = "11.1"
    index: 3
	name: <module-augment-properties>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Augment the property sets of streams with additional static information"
		module.version = "11.1"
    index: 4
	name: <module-switch-on-port-available>
	argument: <>
	used: -1
	load once: no
	properties:
		
    index: 5
	name: <module-switch-on-connect>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Michael Terry"
		module.description = "When a sink/source is added, switch to it or conditionally switch to it"
		module.version = "11.1"
    index: 6
	name: <module-udev-detect>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Detect available audio hardware and load matching drivers"
		module.version = "11.1"
    index: 7
	name: <module-alsa-card>
	argument: <device_id="2" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
	used: 0
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "11.1"
    index: 8
	name: <module-alsa-card>
	argument: <device_id="3" name="usb-046d_0825_6F7A09C0-02" card_name="alsa_card.usb-046d_0825_6F7A09C0-02" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
	used: 0
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "11.1"
    index: 9
	name: <module-alsa-card>
	argument: <device_id="1" name="usb-Burr-Brown_from_TI_USB_Audio_CODEC-00" card_name="alsa_card.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
	used: 0
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "11.1"
    index: 10
	name: <module-alsa-card>
	argument: <device_id="0" name="pci-0000_03_06.0" card_name="alsa_card.pci-0000_03_06.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
	used: 1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "11.1"
    index: 11
	name: <module-bluetooth-policy>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Frédéric Dalleau, Pali Rohár"
		module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
		module.version = "11.1"
    index: 12
	name: <module-bluetooth-discover>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "João Paulo Rechi Vita"
		module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
		module.version = "11.1"
    index: 13
	name: <module-bluez5-discover>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "João Paulo Rechi Vita"
		module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
		module.version = "11.1"
    index: 14
	name: <module-native-protocol-unix>
	argument: <>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Native protocol (UNIX sockets)"
		module.version = "11.1"
    index: 15
	name: <module-gconf>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "GConf Adapter"
		module.version = "11.1"
    index: 16
	name: <module-combine>
	argument: <>
	used: -1
	load once: no
	properties:
		module.author = "Colin Guthrie"
		module.description = "Compatibility module (module-combine rename)"
		module.version = "11.1"
    index: 17
	name: <module-combine-sink>
	argument: <>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Combine multiple sinks to one"
		module.version = "11.1"
    index: 18
	name: <module-default-device-restore>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the default sink and source"
		module.version = "11.1"
    index: 19
	name: <module-rescue-streams>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
		module.version = "11.1"
    index: 20
	name: <module-always-sink>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Hält stets ein Ziel geladen, selbst wenn dies ein Null-Ziel ist"
		module.version = "11.1"
    index: 21
	name: <module-intended-roles>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Automatically set device of streams based on intended roles of devices"
		module.version = "11.1"
    index: 22
	name: <module-suspend-on-idle>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is idle for too long, suspend it"
		module.version = "11.1"
    index: 23
	name: <module-console-kit>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each ConsoleKit session of this user"
		module.version = "11.1"
    index: 24
	name: <module-systemd-login>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each login session of this user"
		module.version = "11.1"
    index: 25
	name: <module-position-event-sounds>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
		module.version = "11.1"
    index: 26
	name: <module-role-cork>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Lennart Poettering"
		module.description = "Mute & cork streams with certain roles while others exist"
		module.version = "11.1"
    index: 27
	name: <module-filter-heuristics>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Detect when various filters are desirable"
		module.version = "11.1"
    index: 28
	name: <module-filter-apply>
	argument: <>
	used: -1
	load once: yes
	properties:
		module.author = "Colin Guthrie"
		module.description = "Load filter sinks automatically when needed"
		module.version = "11.1"
    index: 29
	name: <module-x11-publish>
	argument: <display=:0>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "X11 credential publisher"
		module.version = "11.1"
    index: 30
	name: <module-x11-bell>
	argument: <display=:0 sample=bell.ogg>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "X11 bell interceptor"
		module.version = "11.1"
    index: 31
	name: <module-x11-cork-request>
	argument: <display=:0>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Synthesize X11 media key events when cork/uncork is requested"
		module.version = "11.1"
    index: 32
	name: <module-x11-xsmp>
	argument: <display=:0 session_manager=local/linux:@/tmp/.ICE-unix/2491,unix/linux:/tmp/.ICE-unix/2491>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "X11 session management"
		module.version = "11.1"
    index: 33
	name: <module-cli-protocol-unix>
	argument: <>
	used: -1
	load once: no
	properties:
		module.author = "Lennart Poettering"
		module.description = "Command line interface protocol (UNIX sockets)"
		module.version = "11.1"
3 sink(s) available.
    index: 0
	name: <alsa_output.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9049
	volume: front-left: 0 /   0% / -inf dB,   front-right: 0 /   0% / -inf dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: yes
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 1
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	card: 2 <alsa_card.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00>
	module: 9
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "USB Audio CODEC"
		alsa.long_card_name = "Burr-Brown from TI USB Audio CODEC at usb-0000:00:13.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:13.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/sound/card1"
		udev.id = "usb-Burr-Brown_from_TI_USB_Audio_CODEC-00"
		device.bus = "usb"
		device.vendor.id = "08bb"
		device.vendor.name = "Texas Instruments"
		device.product.id = "2902"
		device.product.name = "PCM2902 Audio Codec"
		device.serial = "Burr-Brown_from_TI_USB_Audio_CODEC"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "PCM2902 Audio Codec Analog Stereo"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB08bb:2902"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	ports:
		analog-output: Analoge Ausgabe (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-output>
  * index: 1
	name: <alsa_output.pci-0000_03_06.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: 
	priority: 9039
	volume: front-left: 19661 /  30% / -31,37 dB,   front-right: 19661 /  30% / -31,37 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 977,20 ms
	max request: 168 KiB
	max rewind: 344 KiB
	monitor source: 3
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	configured latency: 980,00 ms; range is 0,50 .. 2000,00 ms
	card: 3 <alsa_card.pci-0000_03_06.0>
	module: 10
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "Multichannel"
		alsa.id = "Multichannel"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "Xonar DG"
		alsa.long_card_name = "C-Media Oxygen HD Audio at 0xc000, irq 20"
		alsa.driver_name = "snd_oxygen"
		device.bus_path = "pci-0000:03:06.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:06.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "13f6"
		device.vendor.name = "C-Media Electronics Inc"
		device.product.id = "8788"
		device.product.name = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG))"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "352800"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Stereo"
		alsa.mixer_name = "CMI8786"
		alsa.components = "CS4245 CMI8786"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-headphones: Kopfhörer (priority 9000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-headphones>
    index: 2
	name: <combined>
	driver: <module-combine-sink.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1000
	volume: front-left: 65722 / 100% / 0,07 dB,   front-right: 65722 / 100% / 0,07 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 34 KiB
	max rewind: 0 KiB
	monitor source: 4
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 200,00 ms
	module: 17
	properties:
		device.class = "filter"
		device.description = "Simultaneous output to PCM2902 Audio Codec Analog Stereo, CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Stereo"
		device.icon_name = "audio-card"
5 source(s) available.
    index: 0
	name: <alsa_input.usb-046d_0825_6F7A09C0-02.analog-mono>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9049
	volume: mono: 0 /   0% / -inf dB
	        balance 0,00
	base volume: 20724 /  32% / -30,00 dB
	volume steps: 65537
	muted: yes
	current latency: 0,00 ms
	max rewind: 0 KiB
	sample spec: s16le 1ch 48000Hz
	channel map: mono
	             Mono
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	card: 1 <alsa_card.usb-046d_0825_6F7A09C0-02>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "3"
		alsa.card_name = "USB Device 0x46d:0x825"
		alsa.long_card_name = "USB Device 0x46d:0x825 at usb-0000:00:10.1-2, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:10.1-usb-0:2:1.2"
		sysfs.path = "/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.2/sound/card3"
		udev.id = "usb-046d_0825_6F7A09C0-02"
		device.bus = "usb"
		device.vendor.id = "046d"
		device.vendor.name = "Logitech, Inc."
		device.product.id = "0825"
		device.product.name = "Webcam C270"
		device.serial = "046d_0825_6F7A09C0"
		device.form_factor = "webcam"
		device.string = "hw:3"
		device.buffering.buffer_size = "192000"
		device.buffering.fragment_size = "96000"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-mono"
		device.profile.description = "Analog Mono"
		device.description = "Webcam C270 Analog Mono"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB046d:0825"
		module-udev-detect.discovered = "1"
		device.icon_name = "camera-web-usb"
	ports:
		analog-input-mic: Mikrofon (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input-mic>
    index: 1
	name: <alsa_output.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1040
	volume: front-left: 65530 / 100% / -0,00 dB,   front-right: 65530 / 100% / -0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	monitor_of: 0
	card: 2 <alsa_card.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00>
	module: 9
	properties:
		device.description = "Monitor of PCM2902 Audio Codec Analog Stereo"
		device.class = "monitor"
		alsa.card = "1"
		alsa.card_name = "USB Audio CODEC"
		alsa.long_card_name = "Burr-Brown from TI USB Audio CODEC at usb-0000:00:13.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:13.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/sound/card1"
		udev.id = "usb-Burr-Brown_from_TI_USB_Audio_CODEC-00"
		device.bus = "usb"
		device.vendor.id = "08bb"
		device.vendor.name = "Texas Instruments"
		device.product.id = "2902"
		device.product.name = "PCM2902 Audio Codec"
		device.serial = "Burr-Brown_from_TI_USB_Audio_CODEC"
		device.string = "1"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
  * index: 2
	name: <alsa_input.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9049
	volume: front-left: 71593 / 109% / 2,30 dB,   front-right: 71593 / 109% / 2,30 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	card: 2 <alsa_card.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00>
	module: 9
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "USB Audio CODEC"
		alsa.long_card_name = "Burr-Brown from TI USB Audio CODEC at usb-0000:00:13.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:13.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/sound/card1"
		udev.id = "usb-Burr-Brown_from_TI_USB_Audio_CODEC-00"
		device.bus = "usb"
		device.vendor.id = "08bb"
		device.vendor.name = "Texas Instruments"
		device.product.id = "2902"
		device.product.name = "PCM2902 Audio Codec"
		device.serial = "Burr-Brown_from_TI_USB_Audio_CODEC"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "PCM2902 Audio Codec Analog Stereo"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB08bb:2902"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	ports:
		analog-input: Analogeingang (priority 10000, latency offset -10000 usec, available: unknown)
			properties:
				
	active port: <analog-input>
    index: 3
	name: <alsa_output.pci-0000_03_06.0.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: 
	priority: 1030
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 344 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 2000,00 ms; range is 0,50 .. 2000,00 ms
	monitor_of: 1
	card: 3 <alsa_card.pci-0000_03_06.0>
	module: 10
	properties:
		device.description = "Monitor of CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Stereo"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "Xonar DG"
		alsa.long_card_name = "C-Media Oxygen HD Audio at 0xc000, irq 20"
		alsa.driver_name = "snd_oxygen"
		device.bus_path = "pci-0000:03:06.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:06.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "13f6"
		device.vendor.name = "C-Media Electronics Inc"
		device.product.id = "8788"
		device.product.name = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG))"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
    index: 4
	name: <combined.monitor>
	driver: <module-combine-sink.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1000
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 200,00 ms
	monitor_of: 2
	module: 17
	properties:
		device.description = "Monitor Source of Simultaneous output to PCM2902 Audio Codec Analog Stereo, CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Stereo"
		device.class = "monitor"
		device.icon_name = "audio-input-microphone"
9 client(s) logged in.
    index: 0
	driver: <module-systemd-login.c>
	owner module: 24
	properties:
		application.name = "Login Session 1"
		systemd-login.session = "1"
    index: 1
	driver: <protocol-native.c>
	owner module: 14
	properties:
		application.name = "GNOME Shell"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.id = "org.gnome.Shell"
		application.icon_name = "start-here"
		application.language = "de_DE.UTF-8"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.process.id = "2596"
		application.process.user = "peter"
		application.process.host = "linux"
		application.process.binary = "gnome-shell"
		application.process.machine_id = "78a89bc1a8554d3b9c8a549064c7788a"
		application.process.session_id = "1"
    index: 2
	driver: <protocol-native.c>
	owner module: 14
	properties:
		application.name = "GNOME Shell Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "3.28.2"
		application.process.id = "2596"
		application.process.user = "peter"
		application.process.host = "linux"
		application.process.binary = "gnome-shell"
		application.language = "de_DE.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "78a89bc1a8554d3b9c8a549064c7788a"
		application.process.session_id = "1"
    index: 8
	driver: <module-x11-xsmp.c>
	owner module: 32
	properties:
		application.name = "XSMP Session on gnome-session as 1049c3e5f869ec199153390956039082100000024910073"
		xsmp.vendor = "gnome-session"
		xsmp.client.id = "1049c3e5f869ec199153390956039082100000024910073"
    index: 9
	driver: <protocol-native.c>
	owner module: 14
	properties:
		application.name = "GNOME Volume Control Media Keys"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = ""
		application.process.id = "2938"
		application.process.user = "peter"
		application.process.host = "linux"
		application.process.binary = "gsd-media-keys"
		application.language = "de_DE.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "78a89bc1a8554d3b9c8a549064c7788a"
		application.process.session_id = "1"
    index: 10
	driver: <protocol-native.c>
	owner module: 14
	properties:
		application.name = "Chrome input"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "3313"
		application.process.user = "peter"
		application.process.host = "linux"
		application.process.binary = "spotify"
		window.x11.display = ":0"
		application.language = "de_DE.UTF-8"
		application.process.machine_id = "78a89bc1a8554d3b9c8a549064c7788a"
		application.process.session_id = "1"
		application.icon_name = "spotify-client"
    index: 11
	driver: <protocol-native.c>
	owner module: 14
	properties:
		application.name = "Spotify"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "3313"
		application.process.user = "peter"
		application.process.host = "linux"
		application.process.binary = "spotify"
		window.x11.display = ":0"
		application.language = "de_DE.UTF-8"
		application.process.machine_id = "78a89bc1a8554d3b9c8a549064c7788a"
		application.process.session_id = "1"
		application.icon_name = "spotify-client"
    index: 13
	driver: <protocol-native.c>
	owner module: 14
	properties:
		application.name = "Chrome input"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "4201"
		application.process.user = "peter"
		application.process.host = "linux"
		application.process.binary = "chromium-browser"
		application.language = "de_DE.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "78a89bc1a8554d3b9c8a549064c7788a"
		application.process.session_id = "1"
		application.icon_name = "chromium-browser"
    index: 14
	driver: <cli.c>
	owner module: 33
	properties:
		application.name = "UNIX socket client"
4 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_01_00.1>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "2"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xfe080000 irq 41"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card2"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "0e0b"
		device.product.name = "GK106 HDMI Audio Controller"
		device.string = "2"
		device.description = "GK106 HDMI Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI)-Ausgabe (priority 5400, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI)-Ausgabe (priority 300, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI)-Ausgabe (priority 300, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2)-Ausgabe (priority 5200, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2)-Ausgabe (priority 100, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2)-Ausgabe (priority 100, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3)-Ausgabe (priority 5200, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3)-Ausgabe (priority 100, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3)-Ausgabe (priority 100, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4)-Ausgabe (priority 5200, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4)-Ausgabe (priority 100, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4)-Ausgabe (priority 100, available: no)
		off: Aus (priority 0, available: unknown)
	active profile: <off>
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.usb-046d_0825_6F7A09C0-02>
	driver: <module-alsa-card.c>
	owner module: 8
	properties:
		alsa.card = "3"
		alsa.card_name = "USB Device 0x46d:0x825"
		alsa.long_card_name = "USB Device 0x46d:0x825 at usb-0000:00:10.1-2, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:10.1-usb-0:2:1.2"
		sysfs.path = "/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.2/sound/card3"
		udev.id = "usb-046d_0825_6F7A09C0-02"
		device.bus = "usb"
		device.vendor.id = "046d"
		device.vendor.name = "Logitech, Inc."
		device.product.id = "0825"
		device.product.name = "Webcam C270"
		device.serial = "046d_0825_6F7A09C0"
		device.form_factor = "webcam"
		device.string = "3"
		device.description = "Webcam C270"
		module-udev-detect.discovered = "1"
		device.icon_name = "camera-web-usb"
	profiles:
		input:analog-mono: Analog Mono-Eingabe (priority 2, available: unknown)
		off: Aus (priority 0, available: unknown)
	active profile: <input:analog-mono>
	sources:
		alsa_input.usb-046d_0825_6F7A09C0-02.analog-mono/#0: Webcam C270 Analog Mono
	ports:
		analog-input-mic: Mikrofon (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
    index: 2
	name: <alsa_card.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00>
	driver: <module-alsa-card.c>
	owner module: 9
	properties:
		alsa.card = "1"
		alsa.card_name = "USB Audio CODEC"
		alsa.long_card_name = "Burr-Brown from TI USB Audio CODEC at usb-0000:00:13.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:13.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/sound/card1"
		udev.id = "usb-Burr-Brown_from_TI_USB_Audio_CODEC-00"
		device.bus = "usb"
		device.vendor.id = "08bb"
		device.vendor.name = "Texas Instruments"
		device.product.id = "2902"
		device.product.name = "PCM2902 Audio Codec"
		device.serial = "Burr-Brown_from_TI_USB_Audio_CODEC"
		device.string = "1"
		device.description = "PCM2902 Audio Codec"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	profiles:
		input:analog-mono: Analog Mono-Eingabe (priority 2, available: unknown)
		input:analog-stereo: Analog Stereo-Eingabe (priority 60, available: unknown)
		input:iec958-stereo: Digital Stereo (IEC958)-Eingabe (priority 55, available: unknown)
		output:analog-mono: Analog Mono-Ausgabe (priority 200, available: unknown)
		output:analog-mono+input:analog-mono: Analog Mono Duplex (priority 202, available: unknown)
		output:analog-mono+input:analog-stereo: Analog Mono-Ausgabe + Analog Stereo-Eingabe (priority 260, available: unknown)
		output:analog-mono+input:iec958-stereo: Analog Mono-Ausgabe + Digital Stereo (IEC958)-Eingabe (priority 255, available: unknown)
		output:analog-stereo: Analog Stereo-Ausgabe (priority 6000, available: unknown)
		output:analog-stereo+input:analog-mono: Analog Stereo-Ausgabe + Analog Mono-Eingabe (priority 6002, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
		output:analog-stereo+input:iec958-stereo: Analog Stereo-Ausgabe + Digital Stereo (IEC958)-Eingabe (priority 6055, available: unknown)
		output:iec958-stereo: Digital Stereo (IEC958)-Ausgabe (priority 5500, available: unknown)
		output:iec958-stereo+input:analog-mono: Digital Stereo (IEC958)-Ausgabe + Analog Mono-Eingabe (priority 5502, available: unknown)
		output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958)-Ausgabe + Analog Stereo-Eingabe (priority 5560, available: unknown)
		output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex (IEC958) (priority 5555, available: unknown)
		off: Aus (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00.analog-stereo/#0: PCM2902 Audio Codec Analog Stereo
	sources:
		alsa_output.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00.analog-stereo.monitor/#1: Monitor of PCM2902 Audio Codec Analog Stereo
		alsa_input.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00.analog-stereo/#2: PCM2902 Audio Codec Analog Stereo
	ports:
		analog-input: Analogeingang (priority 10000, latency offset -10000 usec, available: unknown)
			properties:
				
		iec958-stereo-input: Digitaleingang (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
		analog-output: Analoge Ausgabe (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
		iec958-stereo-output: Digitalausgang (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
    index: 3
	name: <alsa_card.pci-0000_03_06.0>
	driver: <module-alsa-card.c>
	owner module: 10
	properties:
		alsa.card = "0"
		alsa.card_name = "Xonar DG"
		alsa.long_card_name = "C-Media Oxygen HD Audio at 0xc000, irq 20"
		alsa.driver_name = "snd_oxygen"
		device.bus_path = "pci-0000:03:06.0"
		sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:06.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "13f6"
		device.vendor.name = "C-Media Electronics Inc"
		device.product.id = "8788"
		device.product.name = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG))"
		device.string = "0"
		device.description = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG))"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo-Eingabe (priority 60, available: unknown)
		input:iec958-stereo: Digital Stereo (IEC958)-Eingabe (priority 55, available: unknown)
		output:analog-stereo: Analog Stereo-Ausgabe (priority 6000, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
		output:analog-stereo+input:iec958-stereo: Analog Stereo-Ausgabe + Digital Stereo (IEC958)-Eingabe (priority 6055, available: unknown)
		output:analog-surround-40: Analog Surround 4.0-Ausgabe (priority 700, available: unknown)
		output:analog-surround-40+input:analog-stereo: Analog Surround 4.0-Ausgabe + Analog Stereo-Eingabe (priority 760, available: unknown)
		output:analog-surround-40+input:iec958-stereo: Analog Surround 4.0-Ausgabe + Digital Stereo (IEC958)-Eingabe (priority 755, available: unknown)
		output:analog-surround-51: Analog Surround 5.1-Ausgabe (priority 800, available: unknown)
		output:analog-surround-51+input:analog-stereo: Analog Surround 5.1-Ausgabe + Analog Stereo-Eingabe (priority 860, available: unknown)
		output:analog-surround-51+input:iec958-stereo: Analog Surround 5.1-Ausgabe + Digital Stereo (IEC958)-Eingabe (priority 855, available: unknown)
		output:iec958-stereo: Digital Stereo (IEC958)-Ausgabe (priority 5500, available: unknown)
		output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958)-Ausgabe + Analog Stereo-Eingabe (priority 5560, available: unknown)
		output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex (IEC958) (priority 5555, available: unknown)
		off: Aus (priority 0, available: unknown)
	active profile: <output:analog-stereo>
	sinks:
		alsa_output.pci-0000_03_06.0.analog-stereo/#1: CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Stereo
	sources:
		alsa_output.pci-0000_03_06.0.analog-stereo.monitor/#3: Monitor of CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Stereo
	ports:
		analog-input-front-mic: Vorderes Mikrofon (priority 8500, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Mikrofon (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-linein: Eingang (priority 8100, latency offset 0 usec, available: unknown)
			properties:
				
		analog-input-aux: Analogeingang (priority 8000, latency offset 0 usec, available: unknown)
			properties:
				
		iec958-stereo-input: Digitaleingang (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
		analog-output-headphones: Kopfhörer (priority 9000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-headphones"
		analog-output: Analoge Ausgabe (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
		iec958-stereo-output: Digitalausgang (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
1 sink input(s) available.
    index: 2
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 1 <alsa_output.pci-0000_03_06.0.analog-stereo>
	volume: front-left: 65535 / 100% / -0,00 dB,   front-right: 65535 / 100% / -0,00 dB
	        balance 0,00
	muted: no
	current latency: 523,13 ms
	requested latency: 980,00 ms
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	resample method: (null)
	module: 14
	client: 11 <Spotify>
	properties:
		media.role = "music"
		media.name = "Spotify"
		application.name = "Spotify"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "3313"
		application.process.user = "peter"
		application.process.host = "linux"
		application.process.binary = "spotify"
		window.x11.display = ":0"
		application.language = "de_DE.UTF-8"
		application.process.machine_id = "78a89bc1a8554d3b9c8a549064c7788a"
		application.process.session_id = "1"
		application.icon_name = "spotify-client"
		module-stream-restore.id = "sink-input-by-media-role:music"
0 source output(s) available.
1 cache entrie(s) available.
    name: <bell.ogg>
	index: 0
	sample spec: float32le 1ch 44100Hz
	channel map: mono
	             Mono
	length: 35280
	duration: 0,2 s
	volume: n/a
	        balance 0,00
	lazy: no
	filename: <n/a>
	properties:
		media.role = "event"
		media.name = "bell.ogg"
		application.name = "pactl"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "2899"
		application.process.user = "peter"
		application.process.host = "linux"
		application.process.binary = "pactl"
		application.language = "de_DE.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "78a89bc1a8554d3b9c8a549064c7788a"
		application.process.session_id = "1"

VG, Silentbob

p.s. An dem Rechner ist noch ein kleines Behringer Audio Interface angeschlossen, dass als "PCM2902 Audio Codec Analog Stereo" bezeichnet wird. Da hängt mein Mikrofon dran.

Zum Probieren.Um den Eingang auf combined zu schalten

pacmd set-default-source combined.monitor

Um den Ausgang auf combined zu schalten

pacmd set-default-sink combined

um beides gleichzeitig zu schalten

pacmd set-default-sink combined && pacmd set-default-source combined.monitor

Hallo Kellerkind_2009,

ich hab die Befehle gerade der Reihe nach eingegeben, aber es gab leider keinen Effekt, außer das der komplette Systemsound auf Combined gestellt wurde. Die Pavucontrol sieht nach wie vor aus wie auf dem Screenshot im Anhang.

Schade, dass Pulseaudio sich nicht einfach merken kann, dass Spotify in Combined gestartet werden soll... ☹

VG, Silentbob

Es ist ja möglich Programme mit Optionen zu starten,beispielsweise bei mir (als Test)

sh -c "clementine & pacmd load-module module-combine & pacmd set-default-sink combined"

als Starter.Damit ich das richtig verstehe,hast du den combined durch was Angelegt/starten lassen? Durch die default.pa oder durch paprefs ?

Zeige mal in Sreenshots wenn Spotify läuft und du alles so eingestellt hast wie du es willst.Unter "Klangeinstellung" den Bereich Eingang und Ausgang.

Habe es mal von mir Angehängt,um zu zeigen wie es meine.

Super, das mit dem Starter probiere ich gleich mal aus. Die Einstellungen mache ich über die paprefs. Alles bleibt eigentlich in den Grundeinstellungen, nur den Sink von Spotify stelle ich auf cobined, genauso wie Stream2IP eingestellt ist. Das hat den Vorteil, dass auf der Sourround-Anlage und in OBS dann wirklich auch nur der Ton von Spotify übertragen wird und nicht der komplette Systemsound. Zudem ist die Lautstärke des Streams dann völlig unabhängig vom Systemsound, also immer gleich, was sehr von Vorteil ist. ☺

Im Anhang findest findest Du die Screenies von den Einstellungen so wie ich die gerne hätte. Das mit dem Starter probiere ich gleich wie gesagt mal aus und melde mich dann wieder. Vielleicht ist das ja schön die Lösung. ☺ Mir gehts wirklich nur darum, dass Spotify und ggf. auch Clementine im Sink Combined gestartet werden. ☺ Der Rest kann so bleiben. ☺

VG, Silenbob

Schade, der Befehl für Clementine und Spotify startet das Programme leider ganz normal über den Standard-Sink der Soundkarte und nicht über combined. Hier mal die Ausgabe des Terminals für Clementine:

peter@linux:~$ sh -c "clementine & pacmd load-module module-combine & pacmd set-default-sink combined"
peter@linux:~$ 21:36:02.179 WARN  unknown                          QPainter::begin: Paint device returned engine == 0, type: 2 
21:36:02.548 WARN  unknown                          libpng warning: iCCP: known incorrect sRGB profile 

Bei Spotify kommt das hier, ist glaube ich aber ebenso nicht besonders vielsagend:

peter@linux:~$ sh -c "spotify & pacmd load-module module-combine & pacmd set-default-sink combined"
peter@linux:~$ Gtk-Message: 21:40:26.838: Failed to load module "unity-gtk-module"
Gtk-Message: 21:40:26.838: Failed to load module "canberra-gtk-module"
[0811/214026.957816:ERROR:nss_util.cc(724)] After loading Root Certs, loaded==false: NSS error code: -8018

Danke auf jeden Fall aber mal, dass ihr euch da so engagiert mit mir herumschlägt. ☺

VG, Silentbob