Vielen Dank für das Angebot, ich habe leider noch weitere Probleme.
Arbeiten tue ich mit dem Bacula Admin Tool.
Und hier habe ich momentan das Problem, dass das Band nicht vollständig zugeordnet ist, so interpretiere ich die Fehlermeldung:
status storage=LTO-4
dubus1-sd Version: 5.0.1 (24 February 2010) x86_64-pc-linux-gnu ubuntu 10.04
Daemon started 27-Jan-11 08:58, 0 Jobs run since started.
Heap: heap=425,984 smbytes=157,049 max_bytes=221,955 bufs=101 max_bufs=103
Sizes: boffset_t=8 size_t=8 int32_t=4 int64_t=8
Running Jobs:
Writing: Full Backup job BackupClient1 JobId=8 Volume=""
pool="LTO" device="LTO-4" (/dev/nst0)
spooling=0 despooling=0 despool_wait=0
Files=0 Bytes=0 Bytes/sec=0
FDReadSeqNo=6 in_msg=6 out_msg=4 fd=6
====
Jobs waiting to reserve a drive:
====
Terminated Jobs:
JobId Level Files Bytes Status Finished Name
===================================================================
2 Full 0 0 Error 26-Jan-11 01:05 BackupClient1
3 Full 0 0 Error 26-Jan-11 01:10 BackupCatalog
7 Full 0 0 Cancel 27-Jan-11 08:16 BackupClient1
====
Device status:
Device "FileStorage" is not open or does not exist.
Device "LTO-4" (/dev/nst0) is mounted with:
Volume: Taeglich_2
Pool: LTO
Media type: LTO-4
Device is BLOCKED waiting to create a volume for:
Pool: LTO
Media type: LTO-4
Total Bytes Read=0 Blocks Read=0 Bytes/block=0
Positioned at File=0 Block=0
====
Used Volume status:
Taeglich_2 on device "LTO-4" (/dev/nst0)
Reader=0 writers=0 devres=1 volinuse=0
====
====
mount storage=LTO-4
3001 OK mount requested. Device="LTO-4" (/dev/nst0)
mount storage=LTO-4
3001 OK mount requested. Device="LTO-4" (/dev/nst0)
Hier meine Configs:
bacula-dir.conf
#
# Default Bacula Director Configuration file
#
# The only thing that MUST be changed is to add one or more
# file or directory names in the Include directive of the
# FileSet resource.
#
# For Bacula release 5.0.1 (24 February 2010) -- ubuntu 10.04
#
# You might also want to change the default email address
# from root to your address. See the "mail" and "operator"
# directives in the Messages resource.
#
Director { # define myself
Name = dubus1-dir
DIRport = 9101 # where we listen for UA connections
QueryFile = "/etc/bacula/scripts/query.sql"
WorkingDirectory = "/var/lib/bacula"
PidDirectory = "/var/run/bacula"
Maximum Concurrent Jobs = 1
Password = "Ui3dLcjKWiR6QIyTu+PjPK6wHlziIf7fZlSiCgiZZ3jq" # Console password
Messages = Daemon
DirAddress = 127.0.0.1
# DirAddress = 172.16.10.105
}
JobDefs {
Name = "DefaultJob"
Type = Backup
Level = Full
Client = dubus1-fd
FileSet = "Full Set"
Schedule = "WeeklyCycle"
# Storage = File
Storage = LTO-4
Messages = Standard
Pool = File
Priority = 10
Write Bootstrap = "/var/lib/bacula/%c.bsr"
}
#
# Define the main nightly save backup job
# By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir
Job {
Name = "BackupClient1"
JobDefs = "DefaultJob"
}
#Job {
# Name = "BackupClient2"
# Client = dubus12-fd
# JobDefs = "DefaultJob"
#}
# Backup the catalog database (after the nightly save)
Job {
Name = "BackupCatalog"
JobDefs = "DefaultJob"
Level = Full
FileSet="Catalog"
Schedule = "WeeklyCycleAfterBackup"
# This creates an ASCII copy of the catalog
# Arguments to make_catalog_backup.pl are:
# make_catalog_backup.pl <catalog-name>
RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog"
# This deletes the copy of the catalog
RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup"
Write Bootstrap = "/var/lib/bacula/%n.bsr"
Priority = 11 # run after main backup
}
#
# Standard Restore template, to be changed by Console program
# Only one such job is needed for all Jobs/Clients/Storage ...
#
Job {
Name = "RestoreFiles"
Type = Restore
Client=dubus1-fd
FileSet="Full Set"
Storage = File
Pool = Default
Messages = Standard
Where = /nonexistant/path/to/file/archive/dir/bacula-restores
}
# List of files to be backed up
FileSet {
Name = "Full Set"
Include {
Options {
signature = MD5
}
#
# Put your list of files here, preceded by 'File =', one per line
# or include an external list with:
#
# File = <file-name
#
# Note: / backs up everything on the root partition.
# if you have other partitions such as /usr or /home
# you will probably want to add them too.
#
# By default this is defined to point to the Bacula binary
# directory to give a reasonable FileSet to backup to
# disk storage during initial testing.
#
File = /usr/sbin
File = /home1
File = /home
}
#
# If you backup the root directory, the following two excluded
# files can be useful
#
Exclude {
File = /var/lib/bacula
File = /nonexistant/path/to/file/archive/dir
File = /proc
File = /tmp
File = /.journal
File = /.fsck
}
}
#
# When to do the backups, full backup on first sunday of the month,
# differential (i.e. incremental since full) every other sunday,
# and incremental backups other days
Schedule {
Name = "WeeklyCycle"
Run = Full sat at 01:05
Run = Incremental tue-fri at 01:05
}
# This schedule does the catalog. It starts after the WeeklyCycle
Schedule {
Name = "WeeklyCycleAfterBackup"
Run = Full tue-sat at 01:10
}
# This is the backup of the catalog
FileSet {
Name = "Catalog"
Include {
Options {
signature = MD5
}
File = "/var/lib/bacula/bacula.sql"
}
}
# Sicherung von nur /home1
FileSet {
Name = "nur home1"
Include {
Options {
signature = MD5
}
File = "/home1"
}
}
# Client (File Services) to backup
Client {
Name = dubus1-fd
# Address = localhost
Address = 172.16.10.105
FDPort = 9102
Catalog = MyCatalog
Password = "HiDZsFtTsmMOJFBZcBkWgVsB4xsLgegTz" # password for FileDaemon
File Retention = 30 days # 30 days
Job Retention = 6 months # six months
AutoPrune = yes # Prune expired Jobs/Files
}
#
# Second Client (File Services) to backup
# You should change Name, Address, and Password before using
#
#Client {
# Name = dubus12-fd
# Address = localhost2
# FDPort = 9102
# Catalog = MyCatalog
# Password = "HiDZsFtTsmMOJFBZcBkWgVsB4xsLgegTz2" # password for FileDaemon 2
# File Retention = 30 days # 30 days
# Job Retention = 6 months # six months
# AutoPrune = yes # Prune expired Jobs/Files
#}
# Definition of file storage device
Storage {
Name = File
# Do not use "localhost" here
Address = 172.16.10.105 # N.B. Use a fully qualified name here
SDPort = 9103
Password = "P7lEkECXKXzL12NUV2qS34RK4XYYkKAFn"
Device = FileStorage
Media Type = File
}
# Definition of LTO-4 tape storage device
Storage {
Name = LTO-4
Address = 172.16.10.105 # N.B. Use a fully qualified name here
SDPort = 9103
Password = "P7lEkECXKXzL12NUV2qS34RK4XYYkKAFn" # password for Storage daemon
Device = LTO-4 # must be same as Device in Storage daemon
Media Type = LTO-4 # must be same as MediaType in Storage daemon
Autochanger = no # enable for autochanger device
}
# Definition of 8mm tape storage device
#Storage {
# Name = "8mmDrive"
# Do not use "localhost" here
# Address = localhost # N.B. Use a fully qualified name here
# SDPort = 9103
# Password = "P7lEkECXKXzL12NUV2qS34RK4XYYkKAFn"
# Device = "Exabyte 8mm"
# MediaType = "8mm"
#}
# Definition of DVD storage device
#Storage {
# Name = "DVD"
# Do not use "localhost" here
# Address = localhost # N.B. Use a fully qualified name here
# SDPort = 9103
# Password = "P7lEkECXKXzL12NUV2qS34RK4XYYkKAFn"
# Device = "DVD Writer"
# MediaType = "DVD"
#}
# Generic catalog service
Catalog {
Name = MyCatalog
# Uncomment the following line if you want the dbi driver
# dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport =
dbname = bacula; DB Address = ""; dbuser = "bacula"; dbpassword = "H3lm_tra9en"
}
# Reasonable message delivery -- send most everything to email address
# and to the console
Messages {
Name = Standard
#
# NOTE! If you send to two email or more email addresses, you will need
# to replace the %r in the from field (-f part) with a single valid
# email address in both the mailcommand and the operatorcommand.
# What this does is, it sets the email address that emails would display
# in the FROM field, which is by default the same email as they're being
# sent to. However, if you send email to more than one address, then
# you'll have to set the FROM address manually, to a single address.
# for example, a 'no-reply@mydomain.com', is better since that tends to
# tell (most) people that its coming from an automated source.
#
mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %
c %l\" %r"
operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: Interv
ention needed for %j\" %r"
mail = amo@localhost = all, !skipped
operator = amo@localhost = mount
console = all, !skipped, !saved
#
# WARNING! the following will create a file that you must cycle from
# time to time as it will grow indefinitely. However, it will
# also keep all your messages if they scroll off the console.
#
append = "/var/lib/bacula/log" = all, !skipped
catalog = all
}
#
# Message delivery for daemon messages (no job).
Messages {
Name = Daemon
mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula daemon mess
age\" %r"
mail = amo@localhost = all, !skipped
console = all, !skipped, !saved
append = "/var/lib/bacula/log" = all, !skipped
}
# Default pool definition
Pool {
Name = Default
Pool Type = Backup
Recycle = yes # Bacula can automatically recycle Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 365 days # one year
}
# File Pool definition
Pool {
Name = File
Pool Type = Backup
Recycle = yes # Bacula can automatically recycle Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 365 days # one year
Maximum Volume Bytes = 50G # Limit Volume size to something reasonable
Maximum Volumes = 100 # Limit number of Volumes in Pool
}
# LTO pool definition
Pool {
Name = LTO
Pool Type = Backup
}
# Scratch pool definition
Pool {
Name = Scratch
Pool Type = Backup
}
#
# Restricted console used by tray-monitor to get the status of the director
#
Console {
Name = dubus1-mon
Password = "ga8H63-TbRtI4G6k_lEIcGS5iYNPWEm_u"
CommandACL = status, .status
}
bacula-sd.conf
#
# Default Bacula Storage Daemon Configuration file
#
# For Bacula release 5.0.1 (24 February 2010) -- ubuntu 10.04
#
# You may need to change the name of your tape drive
# on the "Archive Device" directive in the Device
# resource. If you change the Name and/or the
# "Media Type" in the Device resource, please ensure
# that dird.conf has corresponding changes.
#
Storage { # definition of myself
Name = dubus1-sd
SDPort = 9103 # Director's port
WorkingDirectory = "/var/lib/bacula"
Pid Directory = "/var/run/bacula"
Maximum Concurrent Jobs = 20
# SDAddress = 127.0.0.1
SDAddress = 172.16.10.105
}
#
# List Directors who are permitted to contact Storage daemon
#
Director {
Name = dubus1-dir
Password = "P7lEkECXKXzL12NUV2qS34RK4XYYkKAFn"
}
#
# Restricted Director, used by tray-monitor to get the
# status of the storage daemon
#
Director {
Name = dubus1-mon
Password = "RlvIUfnwJ_th30XrbXBsYcG8M5wbsnRDL"
Monitor = yes
}
#
# Note, for a list of additional Device templates please
# see the directory <bacula-source>/examples/devices
# Or follow the following link:
# http://bacula.svn.sourceforge.net/viewvc/bacula/trunk/bacula/examples/devices/
#
#
# Devices supported by this Storage daemon
# To connect, the Director's bacula-dir.conf must have the
# same Name and MediaType.
#
Device {
Name = FileStorage
Media Type = File
Archive Device = /home1/admin/restore # hierher wird ein Restore geschrieben
LabelMedia = yes; # lets Bacula label unlabeled media
Random Access = Yes;
AutomaticMount = yes; # when device opened, read it
RemovableMedia = no;
AlwaysOpen = no;
}
#
# A Linux or Solaris LTO-4 tape drive
#
Device {
Name = LTO-4
Media Type = LTO-4
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Maximum File Size = 50GB
}
#
# Send all messages to the Director,
# mount messages also are sent to the email address
#
Messages {
Name = Standard
director = dubus1-dir = all
}
bacula-fd.conf
#
# Default Bacula File Daemon Configuration file
#
# For Bacula release 5.0.1 (24 February 2010) -- ubuntu 10.04
#
# There is not much to change here except perhaps the
# File daemon Name to
#
#
# List Directors who are permitted to contact this File daemon
#
Director {
Name = dubus1-dir
Password = "HiDZsFtTsmMOJFBZcBkWgVsB4xsLgegTz"
}
#
# Restricted Director, used by tray-monitor to get the
# status of the file daemon
#
Director {
Name = dubus1-mon
Password = "db5vhEzM2UMj4rtmjvMpaV-z3i0S3t6wN"
Monitor = yes
}
#
# "Global" File daemon configuration specifications
#
FileDaemon { # this is me
Name = dubus1-fd
FDport = 9102 # where we listen for the director
WorkingDirectory = /var/lib/bacula
Pid Directory = /var/run/bacula
Maximum Concurrent Jobs = 20
# FDAddress = 127.0.0.1
FDAddress = 172.16.10.105
}
# Send all messages except skipped files back to Director
Messages {
Name = Standard
director = dubus1-dir = all, !skipped, !restored
}
bconsole.conf
#
# Bacula User Agent (or Console) Configuration File
#
Director {
Name = localhost-dir
DIRport = 9101
address = localhost
Password = "Ui3dLcjKWiR6QIyTu+PjPK6wHlziIf7fZlSiCgiZZ3jq"
}