hans889
Anmeldungsdatum: 3. Oktober 2009
Beiträge: 227
Wohnort: Pforzheim
|
Hallo, Drucker ist ein HP envy-4520. Ist eingerichtet als Netzwerkdrucker. Beim Versuch, zu drucken tut sich nichts, in den Systemeinstellunger erscheint die Fehlermeldung: Der Drucker HP30E17B01D37.local kann nicht lokalisiert werden. Im Internet habe ich eine mögliche Lösung gefunden, und zwar, dass statt des Druckernamens die IP-Adresse angegeben werden muss.
Ich weiß aber nicht, wo man das ändern kann. Bitte um Hilfe. Gruß hans889 Moderiert von Taomon: Dieses Thema ist verschoben worden. Bitte beachte die als wichtig markierten Themen („Welche Themen gehören hier her und welche nicht?“)!
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Siehe Screenshot. system-config-printer
- Bilder
|
hans889
(Themenstarter)
Anmeldungsdatum: 3. Oktober 2009
Beiträge: 227
Wohnort: Pforzheim
|
danke Kellerkind_2009, habe die IP-Adresse eingetragen unter Location.
Leider dieselbe Fehlermeldung. Unter 18.04 funktioniert es aber, hab ich grade ausprobiert. Die Settings sind dieselben.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Dann wird es vielleicht an der Hplip Einrichtung liegen.Zeige mal hp-check -r
|
hans889
(Themenstarter)
Anmeldungsdatum: 3. Oktober 2009
Beiträge: 227
Wohnort: Pforzheim
|
Das ist voll von errors: johannes@johannes-ideacentre-510S-08IKL:~$ hp-check -r
Saving output in log file: /home/johannes/hp-check.log
HP Linux Imaging and Printing System (ver. 3.18.7)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to
successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper
dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: ubuntu-18.10 version is not supported. Using ubuntu-18.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.18.0-15-generic #16-Ubuntu SMP Thu Feb 7 10:56:39 UTC 2019 GNU/Linux
Host: johannes-ideacentre-510S-08IKL
Proc: 4.18.0-15-generic #16-Ubuntu SMP Thu Feb 7 10:56:39 UTC 2019 GNU/Linux
Distribution: ubuntu 18.10
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.18.7
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 18.10 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.18.7
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.18.7
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 03/16/19 19:00:11
version = 3.18.7
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.10 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.19.5 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
error: libpthread libpthread - POSIX threads library REQUIRED - b'2.28' MISSING 'libpthread needs to be installed'
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.7 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.8 OK -
python3-xml Python XML libraries REQUIRED - 2.2.6 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.7 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.6 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
error: make make - GNU make utility to maintain groups of programs REQUIRED 3.0 - MISSING 'make needs to be installed'
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.18.7 OK -
hpmudext IO-Extension REQUIRED - 3.18.7 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.18.7 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.18.7 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_ENVY_4520_series
-------------------
Type: Unknown
Device URI: dnssd://HP%20ENVY%204520%20series%20%5BB01D37%5D._ipp._tcp.local/?uuid=1c852a4d-b800-1f08-abcd-30e171b01d37
PPD: /etc/cups/ppd/HP_ENVY_4520_series.ppd
warning: Failed to read /etc/cups/ppd/HP_ENVY_4520_series.ppd ppd file
PPD Description:
Printer status: Drucker HP_ENVY_4520_series ist im Leerlauf. Aktiviert seit Sa 16 Mär 2019 18:28:06 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'libssl-dev' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 17
Total Warnings: 1
Done.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Hmm,zeige mal bitte ls -l /etc/cups/ppd/HP_ENVY_4520_series.ppd id hp-doctor
|
hans889
(Themenstarter)
Anmeldungsdatum: 3. Oktober 2009
Beiträge: 227
Wohnort: Pforzheim
|
Bittesehr: johannes@johannes-ideacentre-510S-08IKL:~$ ls -l /etc/cups/ppd/HP_ENVY_4520_series.ppd
-rw-r----- 1 root lp 29390 Mär 14 18:30 /etc/cups/ppd/HP_ENVY_4520_series.ppd
johannes@johannes-ideacentre-510S-08IKL:~$ id
uid=1000(johannes) gid=1000(johannes) Gruppen=1000(johannes),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),118(lpadmin),128(sambashare)
johannes@johannes-ideacentre-510S-08IKL:~$ hp-doctor
Traceback (most recent call last):
File "/usr/bin/hp-doctor", line 42, in <module>
check_extension_module_env('cupsext')
File "/usr/share/hplip/base/g.py", line 339, in check_extension_module_env
python_ver = xint((sys.version).split(' ')[0]) #find the current python version ; xint() to convert string to int, returns a list
File "/usr/share/hplip/base/g.py", line 331, in xint
return l
UnboundLocalError: local variable 'l' referenced before assignment
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Also die Rechte der ppa stimmen,mal weiter Forschen hp-diagnose_queues -i cat /var/lib/dpkg/statoverride sudo adduser $USER lp Neustart. Danach Druck-Versuch,bei Problemen tail -n 150 /var/log/cups/error_log
|
hans889
(Themenstarter)
Anmeldungsdatum: 3. Oktober 2009
Beiträge: 227
Wohnort: Pforzheim
|
Hab die Befehle eingegeben, neu gestartet. Druckversuch lief ins Leere. johannes@johannes-ideacentre-510S-08IKL:~$ tail -n 150 /var/log/cups/error_log
E [17/Mar/2019:10:28:29 +0100] [cups-deviced] PID 5588 (gutenprint53+usb) stopped with status 1!
W [17/Mar/2019:10:28:37 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:28:37 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:28:37 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:28:37 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:33:44 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:33:44 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:33:44 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:33:44 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
E [17/Mar/2019:10:33:45 +0100] [cups-deviced] PID 1626 (gutenprint53+usb) stopped with status 1!
W [17/Mar/2019:10:33:53 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:33:53 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:33:54 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:33:54 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:47:15 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:47:15 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:47:15 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:47:15 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:47:18 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:47:18 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:47:19 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
W [17/Mar/2019:10:47:19 +0100] DNS-SD registration of "HP ENVY 4520 series @ johannes-ideacentre-510S-08IKL" failed: Local name collision
johannes@johannes-ideacentre-510S-08IKL:~$
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Da stimmt scheinbar einiges nicht! Entferne den Drucker aus system-config-printer dann cups neu starten sudo service cups restart
sudo /etc/init.d/cups restart Dann füge ihn über Cups direkt hinzu http://localhost:631/admin
|
hans889
(Themenstarter)
Anmeldungsdatum: 3. Oktober 2009
Beiträge: 227
Wohnort: Pforzheim
|
Habe ich gemacht, keine Änderung leider. Beim Durchlesen von hp-check -r fiel mir Folgendes auf:
ubuntu-18.10 version is not supported. Ich gebe auf und werde zum Drucken 18.04.2 starten. Danke für deine Hilfe Kellerkind_2009!
|