Danke!!
Hoffentlich passen die Angaben so:
lspci -nnk | grep -A3 "\[03..\]:"
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Stoney [Radeon R2/R3/R4/R5 Graphics] [1002:98e4] (rev e2)
Subsystem: Hewlett-Packard Company Stoney [Radeon R2/R3/R4/R5 Graphics] [103c:84ac]
Kernel driver in use: amdgpu
Kernel modules: amdgpu
xrandr --prop
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 16384 x 16384
eDP connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
EDID:
00ffffffffffff000daedb1500000000
201901049522137802c3c59155549428
24505400000001010101010101010101
010101010101da1d56e250002030442d
470058c11000001ae71356e250002030
442d470058c11000001a000000000000
00000000000000000000000000000002
000c3ae00d3c6e0d0d197b000000005f
GAMMA_LUT_SIZE: 4096
range: (0, -1)
DEGAMMA_LUT_SIZE: 4096
range: (0, -1)
GAMMA_LUT: 0
range: (0, 65535)
CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0
0 1
DEGAMMA_LUT: 0
range: (0, 65535)
TearFree: auto
supported: off, on, auto
vrr_capable: 0
range: (0, 1)
max bpc: 8
range: (8, 16)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
scaling mode: None
supported: None, Full, Center, Full aspect
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 47
supported: 47
non-desktop: 0
range: (0, 1)
1366x768 60.00*+ 40.00
1280x720 60.00
1024x768 60.00
800x600 60.00
640x480 60.00
HDMI-A-0 disconnected (normal left inverted right x axis y axis)
GAMMA_LUT_SIZE: 4096
range: (0, -1)
DEGAMMA_LUT_SIZE: 4096
range: (0, -1)
GAMMA_LUT: 0
range: (0, 65535)
CTM: 0
DEGAMMA_LUT: 0
range: (0, 65535)
TearFree: auto
supported: off, on, auto
vrr_capable: 0
range: (0, 1)
max bpc: 8
range: (8, 16)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
scaling mode: None
supported: None, Full, Center, Full aspect
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 52
supported: 52
non-desktop: 0
range: (0, 1)
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
GAMMA_LUT_SIZE: 4096
range: (0, -1)
DEGAMMA_LUT_SIZE: 4096
range: (0, -1)
GAMMA_LUT: 0
range: (0, 65535)
CTM: 0
DEGAMMA_LUT: 0
range: (0, 65535)
TearFree: auto
supported: off, on, auto
vrr_capable: 0
range: (0, 1)
max bpc: 8
range: (8, 16)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
scaling mode: None
supported: None, Full, Center, Full aspect
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 56
supported: 56
non-desktop: 0
range: (0, 1)
[ 9.224] (--) Log file renamed from "/var/log/Xorg.pid-822.log" to "/var/log/Xorg.0.log"
[ 9.225]
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[ 9.225] Build Operating System: Linux 4.15.0-140-generic x86_64 Ubuntu
[ 9.225] Current Operating System: Linux jmw-hplaptop15db0xxx 5.4.0-74-generic #83-Ubuntu SMP Sat May 8 02:35:39 UTC 2021 x86_64
[ 9.225] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-74-generic root=UUID=64670204-9dab-4e2c-b48c-7ec57b8f3ff6 ro quiet splash vt.handoff=7
[ 9.225] Build Date: 08 April 2021 12:29:22PM
[ 9.225] xorg-server 2:1.20.9-2ubuntu1.2~20.04.2 (For technical support please see http://www.ubuntu.com/support)
[ 9.225] Current version of pixman: 0.38.4
[ 9.225] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.225] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.225] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 13 16:48:46 2021
[ 9.226] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.226] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.227] (==) No Layout section. Using the first Screen section.
[ 9.227] (==) No screen section available. Using defaults.
[ 9.227] (**) |-->Screen "Default Screen Section" (0)
[ 9.227] (**) | |-->Monitor "<default monitor>"
[ 9.228] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.228] (==) Automatically adding devices
[ 9.228] (==) Automatically enabling devices
[ 9.228] (==) Automatically adding GPU devices
[ 9.228] (==) Automatically binding GPU devices
[ 9.228] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 9.238] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 9.238] Entry deleted from font path.
[ 9.238] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 9.238] Entry deleted from font path.
[ 9.238] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 9.238] Entry deleted from font path.
[ 9.239] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 9.239] Entry deleted from font path.
[ 9.239] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 9.239] Entry deleted from font path.
[ 9.239] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 9.239] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.239] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.239] (II) Loader magic: 0x56540a0ff020
[ 9.239] (II) Module ABI versions:
[ 9.239] X.Org ANSI C Emulation: 0.4
[ 9.239] X.Org Video Driver: 24.1
[ 9.239] X.Org XInput driver : 24.1
[ 9.239] X.Org Server Extension : 10.0
[ 9.240] (++) using VT number 1
[ 9.240] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 9.241] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 9.254] (--) PCI:*(0@0:1:0) 1002:98e4:103c:84ac rev 226, Mem @ 0xe8000000/134217728, 0xf0000000/8388608, 0xf0c00000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 9.259] (II) LoadModule: "glx"
[ 9.260] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.277] (II) Module glx: vendor="X.Org Foundation"
[ 9.277] compiled for 1.20.9, module version = 1.0.0
[ 9.277] ABI class: X.Org Server Extension, version 10.0
[ 9.277] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 9.277] loading driver: amdgpu
[ 9.278] (==) Matched amdgpu as autoconfigured driver 0
[ 9.278] (==) Matched ati as autoconfigured driver 1
[ 9.278] (==) Matched modesetting as autoconfigured driver 2
[ 9.278] (==) Matched fbdev as autoconfigured driver 3
[ 9.278] (==) Matched vesa as autoconfigured driver 4
[ 9.278] (==) Assigned the driver to the xf86ConfigLayout
[ 9.278] (II) LoadModule: "amdgpu"
[ 9.278] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 9.284] (II) Module amdgpu: vendor="X.Org Foundation"
[ 9.284] compiled for 1.20.5, module version = 19.1.0
[ 9.284] Module class: X.Org Video Driver
[ 9.284] ABI class: X.Org Video Driver, version 24.0
[ 9.284] (II) LoadModule: "ati"
[ 9.284] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 9.285] (II) Module ati: vendor="X.Org Foundation"
[ 9.285] compiled for 1.20.5, module version = 19.1.0
[ 9.285] Module class: X.Org Video Driver
[ 9.285] ABI class: X.Org Video Driver, version 24.0
[ 9.295] (II) LoadModule: "modesetting"
[ 9.295] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.296] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.296] compiled for 1.20.9, module version = 1.20.9
[ 9.296] Module class: X.Org Video Driver
[ 9.296] ABI class: X.Org Video Driver, version 24.1
[ 9.296] (II) LoadModule: "fbdev"
[ 9.296] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 9.297] (II) Module fbdev: vendor="X.Org Foundation"
[ 9.297] compiled for 1.20.1, module version = 0.5.0
[ 9.297] Module class: X.Org Video Driver
[ 9.297] ABI class: X.Org Video Driver, version 24.0
[ 9.297] (II) LoadModule: "vesa"
[ 9.297] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 9.297] (II) Module vesa: vendor="X.Org Foundation"
[ 9.297] compiled for 1.20.4, module version = 2.4.0
[ 9.297] Module class: X.Org Video Driver
[ 9.297] ABI class: X.Org Video Driver, version 24.0
[ 9.297] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 9.297] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 9.297] (II) FBDEV: driver for framebuffer: fbdev
[ 9.297] (II) VESA: driver for VESA chipsets: vesa
[ 9.315] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[ 9.317] (WW) Falling back to old probe method for modesetting
[ 9.317] (WW) Falling back to old probe method for fbdev
[ 9.317] (II) Loading sub module "fbdevhw"
[ 9.317] (II) LoadModule: "fbdevhw"
[ 9.317] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 9.318] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 9.318] compiled for 1.20.9, module version = 0.0.2
[ 9.318] ABI class: X.Org Video Driver, version 24.1
[ 9.318] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.318] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 9.318] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 9.318] (==) AMDGPU(0): Default visual is TrueColor
[ 9.318] (==) AMDGPU(0): RGB weight 888
[ 9.318] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 9.318] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x98e4)
[ 9.318] (II) Loading sub module "fb"
[ 9.318] (II) LoadModule: "fb"
[ 9.318] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.319] (II) Module fb: vendor="X.Org Foundation"
[ 9.320] compiled for 1.20.9, module version = 1.0.0
[ 9.320] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.320] (II) Loading sub module "dri2"
[ 9.320] (II) LoadModule: "dri2"
[ 9.320] (II) Module "dri2" already built-in
[ 9.653] (II) Loading sub module "glamoregl"
[ 9.653] (II) LoadModule: "glamoregl"
[ 9.653] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 9.687] (II) Module glamoregl: vendor="X.Org Foundation"
[ 9.687] compiled for 1.20.9, module version = 1.0.1
[ 9.687] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.786] (II) AMDGPU(0): glamor X acceleration enabled on AMD STONEY (DRM 3.35.0, 5.4.0-74-generic, LLVM 11.0.0)
[ 9.787] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 9.787] (==) AMDGPU(0): TearFree property default: auto
[ 9.787] (==) AMDGPU(0): VariableRefresh: disabled
[ 9.787] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 9.787] (II) AMDGPU(0): Output eDP has no monitor section
[ 9.787] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 9.787] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 9.795] (WW) AMDGPU(0): 3 ZaphodHeads crtcs unavailable. Some outputs will stay off.
[ 9.795] (II) AMDGPU(0): EDID for output eDP
[ 9.795] (II) AMDGPU(0): Manufacturer: CMN Model: 15db Serial#: 0
[ 9.795] (II) AMDGPU(0): Year: 2015 Week: 32
[ 9.795] (II) AMDGPU(0): EDID Version: 1.4
[ 9.795] (II) AMDGPU(0): Digital Display Input
[ 9.795] (II) AMDGPU(0): 6 bits per channel
[ 9.795] (II) AMDGPU(0): Digital interface is DisplayPort
[ 9.795] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 9.795] (II) AMDGPU(0): Gamma: 2.20
[ 9.795] (II) AMDGPU(0): No DPMS capabilities specified
[ 9.795] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4
[ 9.795] (II) AMDGPU(0): First detailed timing is preferred mode
[ 9.795] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 9.795] (II) AMDGPU(0): redX: 0.569 redY: 0.332 greenX: 0.328 greenY: 0.581
[ 9.795] (II) AMDGPU(0): blueX: 0.159 blueY: 0.141 whiteX: 0.313 whiteY: 0.329
[ 9.795] (II) AMDGPU(0): Manufacturer's mask: 0
[ 9.795] (II) AMDGPU(0): Supported detailed timing:
[ 9.795] (II) AMDGPU(0): clock: 76.4 MHz Image Size: 344 x 193 mm
[ 9.795] (II) AMDGPU(0): h_active: 1366 h_sync: 1434 h_sync_end 1479 h_blank_end 1592 h_border: 0
[ 9.795] (II) AMDGPU(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 800 v_border: 0
[ 9.795] (II) AMDGPU(0): Supported detailed timing:
[ 9.795] (II) AMDGPU(0): clock: 51.0 MHz Image Size: 344 x 193 mm
[ 9.796] (II) AMDGPU(0): h_active: 1366 h_sync: 1434 h_sync_end 1479 h_blank_end 1592 h_border: 0
[ 9.796] (II) AMDGPU(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 800 v_border: 0
[ 9.796] (II) AMDGPU(0): Unknown vendor-specific block 2
[ 9.796] (II) AMDGPU(0): EDID (in hex):
[ 9.796] (II) AMDGPU(0): 00ffffffffffff000daedb1500000000
[ 9.796] (II) AMDGPU(0): 201901049522137802c3c59155549428
[ 9.796] (II) AMDGPU(0): 24505400000001010101010101010101
[ 9.796] (II) AMDGPU(0): 010101010101da1d56e250002030442d
[ 9.796] (II) AMDGPU(0): 470058c11000001ae71356e250002030
[ 9.796] (II) AMDGPU(0): 442d470058c11000001a000000000000
[ 9.796] (II) AMDGPU(0): 00000000000000000000000000000002
[ 9.796] (II) AMDGPU(0): 000c3ae00d3c6e0d0d197b000000005f
[ 9.796] (II) AMDGPU(0): Printing probed modes for output eDP
[ 9.796] (II) AMDGPU(0): Modeline "1366x768"x60.0 76.42 1366 1434 1479 1592 768 772 779 800 +hsync -vsync (48.0 kHz eP)
[ 9.796] (II) AMDGPU(0): Modeline "1366x768"x40.0 50.95 1366 1434 1479 1592 768 772 779 800 +hsync -vsync (32.0 kHz e)
[ 9.796] (II) AMDGPU(0): Modeline "1280x720"x60.0 76.42 1280 1434 1479 1592 720 772 779 800 +hsync -vsync (48.0 kHz e)
[ 9.796] (II) AMDGPU(0): Modeline "1024x768"x60.0 76.42 1024 1434 1479 1592 768 772 779 800 +hsync -vsync (48.0 kHz e)
[ 9.796] (II) AMDGPU(0): Modeline "800x600"x60.0 76.42 800 1434 1479 1592 600 772 779 800 +hsync -vsync (48.0 kHz e)
[ 9.796] (II) AMDGPU(0): Modeline "640x480"x60.0 76.42 640 1434 1479 1592 480 772 779 800 +hsync -vsync (48.0 kHz e)
[ 9.796] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 9.796] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 9.796] (II) AMDGPU(0): Output eDP connected
[ 9.796] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 9.796] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[ 9.796] (II) AMDGPU(0): Using exact sizes for initial modes
[ 9.796] (II) AMDGPU(0): Output eDP using initial mode 1366x768 +0+0
[ 9.796] (II) AMDGPU(0): mem size init: gart size :b2fbb000 vram size: s:4772000 visible:4772000
[ 9.796] (==) AMDGPU(0): DPI set to (96, 96)
[ 9.796] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 9.796] (II) Loading sub module "ramdac"
[ 9.796] (II) LoadModule: "ramdac"
[ 9.796] (II) Module "ramdac" already built-in
[ 9.796] (II) UnloadModule: "modesetting"
[ 9.796] (II) Unloading modesetting
[ 9.796] (II) UnloadModule: "fbdev"
[ 9.796] (II) Unloading fbdev
[ 9.796] (II) UnloadSubModule: "fbdevhw"
[ 9.796] (II) Unloading fbdevhw
[ 9.796] (II) UnloadModule: "vesa"
[ 9.796] (II) Unloading vesa
[ 9.804] (II) AMDGPU(0): [DRI2] Setup complete
[ 9.804] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 9.804] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 9.804] (II) AMDGPU(0): Front buffer pitch: 5504 bytes
[ 9.805] (II) AMDGPU(0): SYNC extension fences enabled
[ 9.805] (II) AMDGPU(0): Present extension enabled
[ 9.805] (==) AMDGPU(0): DRI3 enabled
[ 9.805] (==) AMDGPU(0): Backing store enabled
[ 9.805] (II) AMDGPU(0): Direct rendering enabled
[ 9.864] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 9.864] (II) AMDGPU(0): Acceleration enabled
[ 9.864] (==) AMDGPU(0): DPMS enabled
[ 9.864] (==) AMDGPU(0): Silken mouse enabled
[ 9.864] (II) AMDGPU(0): Set up textured video (glamor)
[ 9.878] (II) Initializing extension Generic Event Extension
[ 9.879] (II) Initializing extension SHAPE
[ 9.879] (II) Initializing extension MIT-SHM
[ 9.879] (II) Initializing extension XInputExtension
[ 9.881] (II) Initializing extension XTEST
[ 9.881] (II) Initializing extension BIG-REQUESTS
[ 9.881] (II) Initializing extension SYNC
[ 9.881] (II) Initializing extension XKEYBOARD
[ 9.882] (II) Initializing extension XC-MISC
[ 9.882] (II) Initializing extension SECURITY
[ 9.882] (II) Initializing extension XFIXES
[ 9.882] (II) Initializing extension RENDER
[ 9.882] (II) Initializing extension RANDR
[ 9.883] (II) Initializing extension COMPOSITE
[ 9.883] (II) Initializing extension DAMAGE
[ 9.883] (II) Initializing extension MIT-SCREEN-SAVER
[ 9.883] (II) Initializing extension DOUBLE-BUFFER
[ 9.883] (II) Initializing extension RECORD
[ 9.884] (II) Initializing extension DPMS
[ 9.884] (II) Initializing extension Present
[ 9.884] (II) Initializing extension DRI3
[ 9.884] (II) Initializing extension X-Resource
[ 9.884] (II) Initializing extension XVideo
[ 9.884] (II) Initializing extension XVideo-MotionCompensation
[ 9.884] (II) Initializing extension SELinux
[ 9.884] (II) SELinux: Disabled on system
[ 9.884] (II) Initializing extension GLX
[ 9.908] (II) AIGLX: Loaded and initialized radeonsi
[ 9.908] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 9.908] (II) Initializing extension XFree86-VidModeExtension
[ 9.908] (II) Initializing extension XFree86-DGA
[ 9.908] (II) Initializing extension XFree86-DRI
[ 9.908] (II) Initializing extension DRI2
[ 9.921] (II) AMDGPU(0): Setting screen physical size to 361 x 203
[ 10.125] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 10.125] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 10.125] (**) Power Button: Applying InputClass "system-keyboard"
[ 10.125] (II) LoadModule: "libinput"
[ 10.125] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 10.132] (II) Module libinput: vendor="X.Org Foundation"
[ 10.132] compiled for 1.20.4, module version = 0.29.0
[ 10.132] Module class: X.Org XInput Driver
[ 10.132] ABI class: X.Org XInput driver, version 24.1
[ 10.132] (II) Using input driver 'libinput' for 'Power Button'
[ 10.132] (**) Power Button: always reports core events
[ 10.132] (**) Option "Device" "/dev/input/event2"
[ 10.132] (**) Option "_source" "server/udev"
[ 10.140] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 10.140] (II) event2 - Power Button: device is a keyboard
[ 10.141] (II) event2 - Power Button: device removed
[ 10.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 10.159] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.159] (**) Option "xkb_model" "pc105"
[ 10.159] (**) Option "xkb_layout" "at"
[ 10.200] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 10.200] (II) event2 - Power Button: device is a keyboard
[ 10.201] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 10.201] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 10.201] (**) Video Bus: Applying InputClass "system-keyboard"
[ 10.201] (II) Using input driver 'libinput' for 'Video Bus'
[ 10.201] (**) Video Bus: always reports core events
[ 10.201] (**) Option "Device" "/dev/input/event4"
[ 10.201] (**) Option "_source" "server/udev"
[ 10.202] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 10.202] (II) event4 - Video Bus: device is a keyboard
[ 10.202] (II) event4 - Video Bus: device removed
[ 10.214] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event4"
[ 10.214] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 10.214] (**) Option "xkb_model" "pc105"
[ 10.215] (**) Option "xkb_layout" "at"
[ 10.216] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 10.216] (II) event4 - Video Bus: device is a keyboard
[ 10.217] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 10.217] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 10.217] (**) Power Button: Applying InputClass "system-keyboard"
[ 10.217] (II) Using input driver 'libinput' for 'Power Button'
[ 10.217] (**) Power Button: always reports core events
[ 10.217] (**) Option "Device" "/dev/input/event0"
[ 10.217] (**) Option "_source" "server/udev"
[ 10.219] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 10.219] (II) event0 - Power Button: device is a keyboard
[ 10.219] (II) event0 - Power Button: device removed
[ 10.246] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 10.246] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 10.246] (**) Option "xkb_model" "pc105"
[ 10.246] (**) Option "xkb_layout" "at"
[ 10.248] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 10.248] (II) event0 - Power Button: device is a keyboard
[ 10.249] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 10.249] (II) No input driver specified, ignoring this device.
[ 10.249] (II) This device may have been added with another device file.
[ 10.251] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[ 10.251] (II) No input driver specified, ignoring this device.
[ 10.251] (II) This device may have been added with another device file.
[ 10.251] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event11)
[ 10.251] (II) No input driver specified, ignoring this device.
[ 10.251] (II) This device may have been added with another device file.
[ 10.252] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event12)
[ 10.252] (II) No input driver specified, ignoring this device.
[ 10.252] (II) This device may have been added with another device file.
[ 10.253] (II) config/udev: Adding input device HP Webcam: HP Webcam (/dev/input/event8)
[ 10.253] (**) HP Webcam: HP Webcam: Applying InputClass "libinput keyboard catchall"
[ 10.253] (**) HP Webcam: HP Webcam: Applying InputClass "system-keyboard"
[ 10.253] (II) Using input driver 'libinput' for 'HP Webcam: HP Webcam'
[ 10.253] (**) HP Webcam: HP Webcam: always reports core events
[ 10.253] (**) Option "Device" "/dev/input/event8"
[ 10.253] (**) Option "_source" "server/udev"
[ 10.258] (II) event8 - HP Webcam: HP Webcam: is tagged by udev as: Keyboard
[ 10.258] (II) event8 - HP Webcam: HP Webcam: device is a keyboard
[ 10.258] (II) event8 - HP Webcam: HP Webcam: device removed
[ 10.286] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input10/event8"
[ 10.286] (II) XINPUT: Adding extended input device "HP Webcam: HP Webcam" (type: KEYBOARD, id 9)
[ 10.286] (**) Option "xkb_model" "pc105"
[ 10.286] (**) Option "xkb_layout" "at"
[ 10.289] (II) event8 - HP Webcam: HP Webcam: is tagged by udev as: Keyboard
[ 10.289] (II) event8 - HP Webcam: HP Webcam: device is a keyboard
[ 10.292] (II) config/udev: Adding input device Logitech USB Trackball (/dev/input/event5)
[ 10.292] (**) Logitech USB Trackball: Applying InputClass "libinput pointer catchall"
[ 10.292] (II) Using input driver 'libinput' for 'Logitech USB Trackball'
[ 10.292] (**) Logitech USB Trackball: always reports core events
[ 10.292] (**) Option "Device" "/dev/input/event5"
[ 10.292] (**) Option "_source" "server/udev"
[ 10.352] (II) event5 - Logitech USB Trackball: is tagged by udev as: Mouse Trackball
[ 10.353] (II) event5 - Logitech USB Trackball: device is a pointer
[ 10.353] (II) event5 - Logitech USB Trackball: device removed
[ 10.387] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C408.0001/input/input7/event5"
[ 10.387] (II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE, id 10)
[ 10.387] (**) Option "AccelerationScheme" "none"
[ 10.387] (**) Logitech USB Trackball: (accel) selected scheme none/0
[ 10.387] (**) Logitech USB Trackball: (accel) acceleration factor: 2.000
[ 10.387] (**) Logitech USB Trackball: (accel) acceleration threshold: 4
[ 10.448] (II) event5 - Logitech USB Trackball: is tagged by udev as: Mouse Trackball
[ 10.449] (II) event5 - Logitech USB Trackball: device is a pointer
[ 10.450] (II) config/udev: Adding input device Logitech USB Trackball (/dev/input/mouse0)
[ 10.450] (II) No input driver specified, ignoring this device.
[ 10.450] (II) This device may have been added with another device file.
[ 10.451] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 10.451] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 10.451] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 10.451] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 10.451] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.451] (**) Option "Device" "/dev/input/event3"
[ 10.451] (**) Option "_source" "server/udev"
[ 10.453] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 10.453] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 10.454] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 10.466] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 10.467] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 10.467] (**) Option "xkb_model" "pc105"
[ 10.467] (**) Option "xkb_layout" "at"
[ 10.469] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 10.469] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 10.470] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 10.470] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 10.470] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 10.470] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10.470] (**) Option "Device" "/dev/input/event6"
[ 10.470] (**) Option "_source" "server/udev"
[ 10.472] (II) event6 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 10.474] (II) event6 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 10.474] (II) event6 - SynPS/2 Synaptics TouchPad: device removed
[ 10.499] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 10.499] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 10.499] (**) Option "AccelerationScheme" "none"
[ 10.499] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 10.499] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 10.499] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 10.501] (II) event6 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 10.503] (II) event6 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 10.504] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 10.504] (II) No input driver specified, ignoring this device.
[ 10.504] (II) This device may have been added with another device file.
[ 10.510] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event7)
[ 10.510] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[ 10.510] (**) HP Wireless hotkeys: Applying InputClass "system-keyboard"
[ 10.510] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[ 10.510] (**) HP Wireless hotkeys: always reports core events
[ 10.510] (**) Option "Device" "/dev/input/event7"
[ 10.510] (**) Option "_source" "server/udev"
[ 10.513] (II) event7 - HP Wireless hotkeys: is tagged by udev as: Keyboard
[ 10.513] (II) event7 - HP Wireless hotkeys: device is a keyboard
[ 10.514] (II) event7 - HP Wireless hotkeys: device removed
[ 10.543] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"
[ 10.543] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 13)
[ 10.543] (**) Option "xkb_model" "pc105"
[ 10.543] (**) Option "xkb_layout" "at"
[ 10.544] (II) event7 - HP Wireless hotkeys: is tagged by udev as: Keyboard
[ 10.544] (II) event7 - HP Wireless hotkeys: device is a keyboard
[ 10.545] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event10)
[ 10.545] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 10.545] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[ 10.545] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 10.545] (**) HP WMI hotkeys: always reports core events
[ 10.545] (**) Option "Device" "/dev/input/event10"
[ 10.545] (**) Option "_source" "server/udev"
[ 10.546] (II) event10 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 10.546] (II) event10 - HP WMI hotkeys: device is a keyboard
[ 10.546] (II) event10 - HP WMI hotkeys: device removed
[ 10.558] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event10"
[ 10.558] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[ 10.558] (**) Option "xkb_model" "pc105"
[ 10.558] (**) Option "xkb_layout" "at"
[ 10.560] (II) event10 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 10.560] (II) event10 - HP WMI hotkeys: device is a keyboard
[ 10.578] (EE) Failed to open authorization file "/var/run/sddm/{081b7a41-2357-4c9d-a33e-426dbf8a712f}": No such file or directory
[ 18.665] (II) AMDGPU(0): EDID vendor "CMN", prod id 5595
[ 18.665] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 18.665] (II) AMDGPU(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 +hsync -vsync (48.0 kHz eP)
[ 18.665] (II) AMDGPU(0): Modeline "1366x768"x0.0 50.95 1366 1434 1479 1592 768 772 779 800 +hsync -vsync (32.0 kHz e)
[ 18.666] (II) AMDGPU(0): EDID vendor "CMN", prod id 5595
[ 18.666] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 18.666] (II) AMDGPU(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 +hsync -vsync (48.0 kHz eP)
[ 18.666] (II) AMDGPU(0): Modeline "1366x768"x0.0 50.95 1366 1434 1479 1592 768 772 779 800 +hsync -vsync (32.0 kHz e)
[ 3332.625] (II) AMDGPU(0): EDID vendor "CMN", prod id 5595
[ 3332.625] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 3332.625] (II) AMDGPU(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 +hsync -vsync (48.0 kHz eP)
[ 3332.625] (II) AMDGPU(0): Modeline "1366x768"x0.0 50.95 1366 1434 1479 1592 768 772 779 800 +hsync -vsync (32.0 kHz e)