Ich habe einen langen Smarttest durchgeführt, der bei einer Platte folgendes Ergebnis gebracht hat:
flow@capri:~$ sudo smartctl -A /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-55-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 16 3 Spin_Up_Time 0x0027 174 172 021 Pre-fail Always - 8275 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 517 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 10129 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 517 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 61 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2775 194 Temperature_Celsius 0x0022 120 097 000 Old_age Always - 32 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
Ich bin unsicher, wie ich den einen Multizone-Fehler deuten soll und bitte daher die Auskenner um Bewertung.