Jetzt nach dem Standby war das Bluetooth Icon aus der Taskleise verschwunden. Eine Verbindung zur Maus kam nicht (automatisch) zustande - durch aktivieren der Maus.
Ich hab dann im Menu Bluetooth-Verwaltung gestartet und darin bei der Maus auf Verbinden gedrückt, dann auf die Maus und es lief.
Aber das ist ein anderes Problem als ich ursprünglich beschrieben habe, da setzt die Verbindung dann einfach so aus.
Hier mal noch der Kernel-log nach dem Hochfahren - aber ich glaube das bringt gar nicht viel, das ist wohl eher eine obere Schicht:
Es beginnt mit der letzten Zeile vor dem Suspend.
[ 39.853647] hid-generic 0005:05AC:3232.0002: input,hidraw1: BLUETOOTH HID v0.01 Mouse [Bluetooth Mouse] on 00:c2:c6:e2:c0:ec
[ 2576.422089] PM: suspend entry (deep)
[ 2576.434024] Filesystems sync: 0.011 seconds
[ 2576.435601] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 2576.438480] OOM killer disabled.
[ 2576.438482] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2576.440371] printk: Suspending console(s) (use no_console_suspend to debug)
[ 2576.441129] wlp108s0: deauthenticating from dc:39:6f:49:29:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2576.462677] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 2576.463669] sd 1:0:0:0: [sda] Stopping disk
[ 2576.814420] ACPI: EC: interrupt blocked
[ 2576.859821] ACPI: Preparing to enter system sleep state S3
[ 2576.862084] ACPI: EC: event blocked
[ 2576.862085] ACPI: EC: EC stopped
[ 2576.862086] PM: Saving platform NVS memory
[ 2576.862128] Disabling non-boot CPUs ...
[ 2576.862839] IRQ 123: no longer affine to CPU1
[ 2576.864915] smpboot: CPU 1 is now offline
[ 2576.869486] IRQ 125: no longer affine to CPU2
[ 2576.871564] smpboot: CPU 2 is now offline
[ 2576.876182] IRQ 122: no longer affine to CPU3
[ 2576.876190] IRQ 127: no longer affine to CPU3
[ 2576.877223] smpboot: CPU 3 is now offline
[ 2576.884110] ACPI: Low-level resume complete
[ 2576.884261] ACPI: EC: EC started
[ 2576.884263] PM: Restoring platform NVS memory
[ 2576.885153] Enabling non-boot CPUs ...
[ 2576.885243] x86: Booting SMP configuration:
[ 2576.885245] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2576.886950] CPU1 is up
[ 2576.886994] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 2576.887900] CPU2 is up
[ 2576.887942] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2576.888791] CPU3 is up
[ 2576.890752] ACPI: Waking up from system sleep state S3
[ 2576.907339] ACPI: EC: interrupt unblocked
[ 2576.949642] ACPI: EC: event unblocked
[ 2576.950300] sd 1:0:0:0: [sda] Starting disk
[ 2576.952564] usb usb1: root hub lost power or was reset
[ 2576.952569] usb usb2: root hub lost power or was reset
[ 2576.964455] iwlwifi 0000:6c:00.0: Applying debug destination EXTERNAL_DRAM
[ 2577.111546] iwlwifi 0000:6c:00.0: Applying debug destination EXTERNAL_DRAM
[ 2577.192721] iwlwifi 0000:6c:00.0: FW already configured (0) - re-configuring
[ 2577.265005] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2577.266110] ata2.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 2577.266114] ata2.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2577.268555] ata2.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 2577.268561] ata2.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2577.269576] ata2.00: configured for UDMA/133
[ 2577.314326] usb 1-1: reset high-speed USB device number 2 using xhci_hcd
[ 2577.590488] usb 1-5: reset full-speed USB device number 3 using xhci_hcd
[ 2577.743075] acpi LNXPOWER:18: Turning OFF
[ 2577.743224] acpi LNXPOWER:17: Turning OFF
[ 2577.743362] acpi LNXPOWER:16: Turning OFF
[ 2577.743498] acpi LNXPOWER:15: Turning OFF
[ 2577.743633] acpi LNXPOWER:14: Turning OFF
[ 2577.743768] acpi LNXPOWER:13: Turning OFF
[ 2577.743903] acpi LNXPOWER:12: Turning OFF
[ 2577.744036] acpi LNXPOWER:11: Turning OFF
[ 2577.744170] acpi LNXPOWER:10: Turning OFF
[ 2577.744306] acpi LNXPOWER:0f: Turning OFF
[ 2577.744441] acpi LNXPOWER:0e: Turning OFF
[ 2577.744576] acpi LNXPOWER:0d: Turning OFF
[ 2577.744710] acpi LNXPOWER:0c: Turning OFF
[ 2577.744843] acpi LNXPOWER:0b: Turning OFF
[ 2577.744979] acpi LNXPOWER:0a: Turning OFF
[ 2577.745116] acpi LNXPOWER:09: Turning OFF
[ 2577.745251] acpi LNXPOWER:08: Turning OFF
[ 2577.745387] acpi LNXPOWER:07: Turning OFF
[ 2577.745522] acpi LNXPOWER:06: Turning OFF
[ 2577.745657] acpi LNXPOWER:05: Turning OFF
[ 2577.746623] acpi LNXPOWER:04: Turning OFF
[ 2577.748211] OOM killer enabled.
[ 2577.748213] Restarting tasks ... done.
[ 2577.838778] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 2577.839051] PM: suspend exit
[ 2577.845736] Bluetooth: hci0: Device revision is 5
[ 2577.845739] Bluetooth: hci0: Secure boot is enabled
[ 2577.845739] Bluetooth: hci0: OTP lock is enabled
[ 2577.845740] Bluetooth: hci0: API lock is enabled
[ 2577.845741] Bluetooth: hci0: Debug lock is disabled
[ 2577.845743] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 2577.845747] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 2578.375025] iwlwifi 0000:6c:00.0: Applying debug destination EXTERNAL_DRAM
[ 2578.535102] iwlwifi 0000:6c:00.0: Applying debug destination EXTERNAL_DRAM
[ 2578.618589] iwlwifi 0000:6c:00.0: FW already configured (0) - re-configuring
[ 2579.406510] Bluetooth: hci0: Waiting for firmware download to complete
[ 2579.406853] Bluetooth: hci0: Firmware loaded in 1535651 usecs
[ 2579.406936] Bluetooth: hci0: Waiting for device to boot
[ 2579.418890] Bluetooth: hci0: Device booted in 11740 usecs
[ 2579.418901] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[ 2579.422912] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 2581.014408] ACPI BIOS Error (bug): Failure creating named object [\_GPE._E16.SPRT], AE_ALREADY_EXISTS (20190816/dswload2-326)
[ 2581.014417] No Local Variables are initialized for Method [_E16]
[ 2581.014418] No Arguments are initialized for method [_E16]
[ 2581.014419] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-220)
[ 2581.014421] ACPI Error: Aborting method \_GPE._E16 due to previous error (AE_ALREADY_EXISTS) (20190816/psparse-529)
[ 2581.014425] ACPI Error: Aborting method \_GPE._E16 due to previous error (AE_ALREADY_EXISTS) (20190816/psparse-529)
[ 2581.014431] ACPI Error: AE_ALREADY_EXISTS, while evaluating GPE method [_E16] (20190816/evgpe-511)
[ 2582.240210] wlp108s0: authenticate with dc:39:6f:49:29:c8
[ 2582.248985] wlp108s0: send auth to dc:39:6f:49:29:c8 (try 1/3)
[ 2582.258529] wlp108s0: authenticated
[ 2582.262116] wlp108s0: associate with dc:39:6f:49:29:c8 (try 1/3)
[ 2582.269768] wlp108s0: RX AssocResp from dc:39:6f:49:29:c8 (capab=0x1431 status=0 aid=3)
[ 2582.273035] wlp108s0: associated
[ 2582.311578] IPv6: ADDRCONF(NETDEV_CHANGE): wlp108s0: link becomes ready
[ 2582.328852] wlp108s0: Limiting TX power to 20 (20 - 0) dBm as advertised by dc:39:6f:49:29:c8
[ 2586.066137] pci 0000:01:00.0: [8086:1578] type 01 class 0x060400
[ 2586.066215] pci 0000:01:00.0: enabling Extended Tags
[ 2586.066325] pci 0000:01:00.0: supports D1 D2
[ 2586.066326] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2586.066390] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[ 2586.078027] pci 0000:02:00.0: [8086:1578] type 01 class 0x060400
[ 2586.078109] pci 0000:02:00.0: enabling Extended Tags
[ 2586.078223] pci 0000:02:00.0: supports D1 D2
[ 2586.078225] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2586.078362] pci 0000:02:01.0: [8086:1578] type 01 class 0x060400
[ 2586.078441] pci 0000:02:01.0: enabling Extended Tags
[ 2586.078549] pci 0000:02:01.0: supports D1 D2
[ 2586.078550] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2586.078669] pci 0000:02:02.0: [8086:1578] type 01 class 0x060400
[ 2586.078747] pci 0000:02:02.0: enabling Extended Tags
[ 2586.078852] pci 0000:02:02.0: supports D1 D2
[ 2586.078853] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2586.079042] pci 0000:02:04.0: [8086:1578] type 01 class 0x060400
[ 2586.079122] pci 0000:02:04.0: enabling Extended Tags
[ 2586.079232] pci 0000:02:04.0: supports D1 D2
[ 2586.079233] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2586.079375] pci 0000:01:00.0: PCI bridge to [bus 02-6b]
[ 2586.079386] pci 0000:01:00.0: bridge window [mem 0xbc000000-0xea0fffff]
[ 2586.079393] pci 0000:01:00.0: bridge window [mem 0x70000000-0xb9ffffff 64bit pref]
[ 2586.079467] pci 0000:03:00.0: [8086:1577] type 00 class 0x088000
[ 2586.079511] pci 0000:03:00.0: reg 0x10: [mem 0xea000000-0xea03ffff]
[ 2586.079524] pci 0000:03:00.0: reg 0x14: [mem 0xea040000-0xea040fff]
[ 2586.079596] pci 0000:03:00.0: enabling Extended Tags
[ 2586.079719] pci 0000:03:00.0: supports D1 D2
[ 2586.079721] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2586.079924] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 2586.079934] pci 0000:02:00.0: bridge window [mem 0xea000000-0xea0fffff]
[ 2586.080004] pci 0000:02:01.0: PCI bridge to [bus 04-36]
[ 2586.080014] pci 0000:02:01.0: bridge window [mem 0xbc000000-0xd3efffff]
[ 2586.080021] pci 0000:02:01.0: bridge window [mem 0x70000000-0x8fffffff 64bit pref]
[ 2586.080115] pci 0000:37:00.0: [8086:15b6] type 00 class 0x0c0330
[ 2586.080157] pci 0000:37:00.0: reg 0x10: [mem 0xd3f00000-0xd3f0ffff]
[ 2586.080368] pci 0000:37:00.0: supports D1 D2
[ 2586.080370] pci 0000:37:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2586.080442] pci 0000:37:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[ 2586.080625] pci 0000:02:02.0: PCI bridge to [bus 37]
[ 2586.080637] pci 0000:02:02.0: bridge window [mem 0xd3f00000-0xd3ffffff]
[ 2586.080721] pci 0000:02:04.0: PCI bridge to [bus 38-6b]
[ 2586.080732] pci 0000:02:04.0: bridge window [mem 0xd4000000-0xe9ffffff]
[ 2586.080740] pci 0000:02:04.0: bridge window [mem 0x90000000-0xb9ffffff 64bit pref]
[ 2586.080776] pci_bus 0000:02: Allocating resources
[ 2586.080804] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-36] add_size 1000
[ 2586.080806] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 37] add_size 1000
[ 2586.080810] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 37] add_size 200000 add_align 100000
[ 2586.080812] pci 0000:02:04.0: bridge window [io 0x1000-0x0fff] to [bus 38-6b] add_size 1000
[ 2586.080816] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-6b] add_size 4000
[ 2586.080821] pci 0000:01:00.0: BAR 13: no space for [io size 0x4000]
[ 2586.080823] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x4000]
[ 2586.080826] pci 0000:01:00.0: BAR 13: no space for [io size 0x4000]
[ 2586.080827] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x4000]
[ 2586.080836] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 2586.080838] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 2586.080841] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 2586.080843] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 2586.080845] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 2586.080847] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 2586.080849] pci 0000:02:04.0: BAR 13: no space for [io size 0x1000]
[ 2586.080851] pci 0000:02:04.0: BAR 13: failed to assign [io size 0x1000]
[ 2586.080853] pci 0000:02:04.0: BAR 13: no space for [io size 0x1000]
[ 2586.080855] pci 0000:02:04.0: BAR 13: failed to assign [io size 0x1000]
[ 2586.080859] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 2586.080862] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 2586.080864] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 2586.080865] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 2586.080867] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 2586.080869] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 2586.080873] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 2586.080881] pci 0000:02:00.0: bridge window [mem 0xea000000-0xea0fffff]
[ 2586.080894] pci 0000:02:01.0: PCI bridge to [bus 04-36]
[ 2586.080901] pci 0000:02:01.0: bridge window [mem 0xbc000000-0xd3efffff]
[ 2586.080907] pci 0000:02:01.0: bridge window [mem 0x70000000-0x8fffffff 64bit pref]
[ 2586.080915] pci 0000:02:02.0: PCI bridge to [bus 37]
[ 2586.080922] pci 0000:02:02.0: bridge window [mem 0xd3f00000-0xd3ffffff]
[ 2586.080933] pci 0000:02:04.0: PCI bridge to [bus 38-6b]
[ 2586.080940] pci 0000:02:04.0: bridge window [mem 0xd4000000-0xe9ffffff]
[ 2586.080945] pci 0000:02:04.0: bridge window [mem 0x90000000-0xb9ffffff 64bit pref]
[ 2586.080954] pci 0000:01:00.0: PCI bridge to [bus 02-6b]
[ 2586.080961] pci 0000:01:00.0: bridge window [mem 0xbc000000-0xea0fffff]
[ 2586.080966] pci 0000:01:00.0: bridge window [mem 0x70000000-0xb9ffffff 64bit pref]
[ 2586.083139] xhci_hcd 0000:37:00.0: xHCI Host Controller
[ 2586.083146] xhci_hcd 0000:37:00.0: new USB bus registered, assigned bus number 3
[ 2586.084272] xhci_hcd 0000:37:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 2586.084521] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 2586.084523] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2586.084525] usb usb3: Product: xHCI Host Controller
[ 2586.084529] usb usb3: Manufacturer: Linux 5.4.0-40-generic xhci-hcd
[ 2586.084531] usb usb3: SerialNumber: 0000:37:00.0
[ 2586.084707] hub 3-0:1.0: USB hub found
[ 2586.084719] hub 3-0:1.0: 2 ports detected
[ 2586.085494] xhci_hcd 0000:37:00.0: xHCI Host Controller
[ 2586.085498] xhci_hcd 0000:37:00.0: new USB bus registered, assigned bus number 4
[ 2586.085502] xhci_hcd 0000:37:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 2586.085547] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 2586.085549] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2586.085550] usb usb4: Product: xHCI Host Controller
[ 2586.085552] usb usb4: Manufacturer: Linux 5.4.0-40-generic xhci-hcd
[ 2586.085553] usb usb4: SerialNumber: 0000:37:00.0
[ 2586.085676] hub 4-0:1.0: USB hub found
[ 2586.085686] hub 4-0:1.0: 2 ports detected
[ 2626.993002] xhci_hcd 0000:37:00.0: Refused to change power state, currently in D3
[ 2627.068651] xhci_hcd 0000:37:00.0: Refused to change power state, currently in D3
[ 2627.068712] xhci_hcd 0000:37:00.0: Controller not ready at resume -19
[ 2627.068721] xhci_hcd 0000:37:00.0: PCI post-resume error -19!
[ 2627.068731] xhci_hcd 0000:37:00.0: HC died; cleaning up
[ 2627.068901] xhci_hcd 0000:37:00.0: remove, state 4
[ 2627.068910] usb usb4: USB disconnect, device number 1
[ 2627.073041] xhci_hcd 0000:37:00.0: USB bus 4 deregistered
[ 2627.073058] xhci_hcd 0000:37:00.0: remove, state 4
[ 2627.073066] usb usb3: USB disconnect, device number 1
[ 2627.073793] xhci_hcd 0000:37:00.0: Host halt failed, -19
[ 2627.073799] xhci_hcd 0000:37:00.0: Host not accessible, reset failed.
[ 2627.074004] xhci_hcd 0000:37:00.0: USB bus 3 deregistered
[ 2627.613042] pci_bus 0000:02: Allocating resources
[ 2627.613086] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-36] add_size 1000
[ 2627.613093] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 37] add_size 1000
[ 2627.613101] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 37] add_size 200000 add_align 100000
[ 2627.613106] pcieport 0000:02:04.0: bridge window [io 0x1000-0x0fff] to [bus 38-6b] add_size 1000
[ 2627.613113] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-6b] add_size 4000
[ 2627.613124] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x4000]
[ 2627.613128] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x4000]
[ 2627.613133] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x4000]
[ 2627.613137] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x4000]
[ 2627.613157] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 2627.613161] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 2627.613166] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 2627.613169] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 2627.613173] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 2627.613176] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 2627.613181] pcieport 0000:02:04.0: BAR 13: no space for [io size 0x1000]
[ 2627.613184] pcieport 0000:02:04.0: BAR 13: failed to assign [io size 0x1000]
[ 2627.613191] pcieport 0000:02:04.0: BAR 13: no space for [io size 0x1000]
[ 2627.613195] pcieport 0000:02:04.0: BAR 13: failed to assign [io size 0x1000]
[ 2627.613203] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 2627.613206] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 2627.613210] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 2627.613214] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 2627.613218] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 2627.613221] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 2628.486809] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[ 2632.320412] pcieport 0000:02:00.0: Refused to change power state, currently in D3
[ 2632.330540] pci_bus 0000:03: busn_res: [bus 03] is released
[ 2632.330781] pci_bus 0000:04: busn_res: [bus 04-36] is released
[ 2632.330985] pci_bus 0000:37: busn_res: [bus 37] is released
[ 2632.331279] pci_bus 0000:38: busn_res: [bus 38-6b] is released
[ 2632.331475] pci_bus 0000:02: busn_res: [bus 02-6b] is released
[ 2653.103030] hid-generic 0005:05AC:3232.0003: unknown main item tag 0x0
[ 2653.103226] input: Bluetooth Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/bluetooth/hci0/hci0:256/0005:05AC:3232.0003/input/input34
[ 2653.104990] hid-generic 0005:05AC:3232.0003: input,hidraw1: BLUETOOTH HID v0.01 Mouse [Bluetooth Mouse] on 00:c2:c6:e2:c0:ec