olliolliolli
Anmeldungsdatum: 29. April 2018
Beiträge: 16
|
Hallo! Leider funktioniert mein Bluetooth bei Ubuntu 18.04 überhaupt nicht - so kann ich mich weder mit meinem Handy noch mit meiner Musikanlage verbinden (zweiteres finde ich noch schlimmer). Ich habe ein HP C Pavilion 17-f024ng Notebook (Intel® Pentium(R) CPU N3530 @ 2.16GHz × 4). Ich hoffe, dass mir jemand weiterhelfen kann ... LG Olli Moderiert von Cruiz: In den am wenigsten unpassenden Bereich verschoben, da allgemeines Bluetooth-Problem.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Zeige mal die Terminal Ausgabe von journalctl | grep -i bluetooth
|
olliolliolli
(Themenstarter)
Anmeldungsdatum: 29. April 2018
Beiträge: 16
|
Das sieht folgendermaßen aus: Apr 29 14:36:32 Fritz kernel: Bluetooth: Core ver 2.22
Apr 29 14:36:32 Fritz kernel: Bluetooth: HCI device and connection manager initialized
Apr 29 14:36:32 Fritz kernel: Bluetooth: HCI socket layer initialized
Apr 29 14:36:32 Fritz kernel: Bluetooth: L2CAP socket layer initialized
Apr 29 14:36:32 Fritz kernel: Bluetooth: SCO socket layer initialized
Apr 29 14:36:33 Fritz kernel: Bluetooth: HCI UART driver ver 2.3
Apr 29 14:36:33 Fritz kernel: Bluetooth: HCI UART protocol H4 registered
Apr 29 14:36:33 Fritz kernel: Bluetooth: HCI UART protocol BCSP registered
Apr 29 14:36:33 Fritz kernel: Bluetooth: HCI UART protocol LL registered
Apr 29 14:36:33 Fritz kernel: Bluetooth: HCI UART protocol ATH3K registered
Apr 29 14:36:33 Fritz kernel: Bluetooth: HCI UART protocol Three-wire (H5) registered
Apr 29 14:36:33 Fritz kernel: Bluetooth: HCI UART protocol Intel registered
Apr 29 14:36:33 Fritz kernel: Bluetooth: HCI UART protocol Broadcom registered
Apr 29 14:36:33 Fritz kernel: Bluetooth: HCI UART protocol QCA registered
Apr 29 14:36:33 Fritz kernel: Bluetooth: HCI UART protocol AG6XX registered
Apr 29 14:36:33 Fritz kernel: Bluetooth: HCI UART protocol Marvell registered
Apr 29 14:36:34 Fritz kernel: Bluetooth: hci0: BCM: chip id 70
Apr 29 14:36:34 Fritz kernel: Bluetooth: hci0: BCM: features 0x06
Apr 29 14:36:34 Fritz kernel: Bluetooth: hci0: ubuntu
Apr 29 14:36:34 Fritz kernel: Bluetooth: hci0: BCM (001.001.011) build 0000
Apr 29 14:36:34 Fritz kernel: bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
Apr 29 14:36:34 Fritz kernel: Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
Apr 29 14:36:36 Fritz kernel: Bluetooth: hci0: command 0x1003 tx timeout
Apr 29 14:36:41 Fritz systemd[1]: Starting Bluetooth service...
Apr 29 14:36:41 Fritz bluetoothd[622]: Bluetooth daemon 5.48
Apr 29 14:36:43 Fritz systemd[1]: Started Bluetooth service.
Apr 29 14:36:44 Fritz systemd[1]: Reached target Bluetooth.
Apr 29 14:36:44 Fritz bluetoothd[622]: Starting SDP server
Apr 29 14:36:45 Fritz kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Apr 29 14:36:45 Fritz kernel: Bluetooth: BNEP filters: protocol multicast
Apr 29 14:36:45 Fritz kernel: Bluetooth: BNEP socket layer initialized
Apr 29 14:36:45 Fritz dbus-daemon[627]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.4' (uid=0 pid=622 comm="/usr/lib/bluetooth/bluetoothd " label="unconfined")
Apr 29 14:36:45 Fritz bluetoothd[622]: Bluetooth management interface 1.14 initialized
Apr 29 14:36:47 Fritz bluetoothd[622]: Loading LTKs timed out for hci0
Apr 29 14:36:47 Fritz kernel: Bluetooth: hci0: command 0x1003 tx timeout
Apr 29 14:36:49 Fritz NetworkManager[675]: <info> [1525005409.3987] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-bluetooth.so)
Apr 29 14:37:39 Fritz bluetoothd[622]: Endpoint registered: sender=:1.82 path=/MediaEndpoint/A2DPSource
Apr 29 14:37:39 Fritz bluetoothd[622]: Endpoint registered: sender=:1.82 path=/MediaEndpoint/A2DPSink
Apr 29 14:37:39 Fritz kernel: Bluetooth: RFCOMM TTY layer initialized
Apr 29 14:37:39 Fritz kernel: Bluetooth: RFCOMM socket layer initialized
Apr 29 14:37:39 Fritz kernel: Bluetooth: RFCOMM ver 1.11
Apr 29 14:40:56 Fritz systemd[1476]: Starting Bluetooth OBEX service...
Apr 29 14:40:56 Fritz systemd[1476]: Started Bluetooth OBEX service.
Apr 29 14:41:01 Fritz kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
Apr 29 14:41:17 Fritz kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
Apr 29 14:41:33 Fritz kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
Apr 29 14:41:49 Fritz kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
Apr 29 14:42:05 Fritz kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
Apr 29 14:42:21 Fritz kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
Apr 29 14:42:37 Fritz kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
Apr 29 14:42:53 Fritz kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
Apr 29 14:43:09 Fritz kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
Apr 29 14:43:25 Fritz kernel: Bluetooth: hci0: last event is not cmd complete (0x0f)
Apr 29 14:44:02 Fritz bluetoothd[622]: Failed to set mode: Blocked through rfkill (0x12)
Apr 29 18:08:20 Fritz bluetoothd[622]: Endpoint unregistered: sender=:1.82 path=/MediaEndpoint/A2DPSource
Apr 29 18:08:20 Fritz bluetoothd[622]: Endpoint unregistered: sender=:1.82 path=/MediaEndpoint/A2DPSink
Apr 29 18:08:20 Fritz dbus-daemon[627]: [system] Rejected send message, 1 matched rules; type="error", sender=":1.82" (uid=1000 pid=1740 comm="/usr/bin/pulseaudio --start --log-target=syslog " label="unconfined") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.4" (uid=0 pid=622 comm="/usr/lib/bluetooth/bluetoothd " label="unconfined")
Apr 29 18:08:20 Fritz dbus-daemon[627]: [system] Rejected send message, 1 matched rules; type="error", sender=":1.82" (uid=1000 pid=1740 comm="/usr/bin/pulseaudio --start --log-target=syslog " label="unconfined") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.4" (uid=0 pid=622 comm="/usr/lib/bluetooth/bluetoothd " label="unconfined")
Apr 29 18:08:20 Fritz dbus-daemon[627]: [system] Rejected send message, 1 matched rules; type="error", sender=":1.82" (uid=1000 pid=1740 comm="/usr/bin/pulseaudio --start --log-target=syslog " label="unconfined") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.4" (uid=0 pid=622 comm="/usr/lib/bluetooth/bluetoothd " label="unconfined")
Apr 29 18:08:20 Fritz dbus-daemon[627]: [system] Rejected send message, 1 matched rules; type="error", sender=":1.82" (uid=1000 pid=1740 comm="/usr/bin/pulseaudio --start --log-target=syslog " label="unconfined") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.4" (uid=0 pid=622 comm="/usr/lib/bluetooth/bluetoothd " label="unconfined")
Apr 29 18:08:20 Fritz systemd[1]: bluetooth.target: Unit not needed anymore. Stopping.
Apr 29 18:08:20 Fritz systemd[1]: Stopped target Bluetooth.
Apr 29 18:08:20 Fritz systemd[1]: Reached target Bluetooth.
Apr 29 18:08:20 Fritz kernel: Bluetooth: hci0: BCM: chip id 70
Apr 29 18:08:20 Fritz kernel: Bluetooth: hci0: BCM: features 0x06
Apr 29 18:08:20 Fritz kernel: Bluetooth: hci0: BCM43142A
Apr 29 18:08:20 Fritz kernel: Bluetooth: hci0: BCM (001.001.011) build 0000
Apr 29 18:08:20 Fritz kernel: bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
Apr 29 18:08:20 Fritz kernel: Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
Apr 29 18:08:22 Fritz kernel: Bluetooth: hci0: command 0x1003 tx timeout
Apr 29 18:08:22 Fritz bluetoothd[622]: Failed to set mode: Blocked through rfkill (0x12)
Apr 29 18:08:22 Fritz bluetoothd[622]: Endpoint registered: sender=:1.82 path=/MediaEndpoint/A2DPSource
Apr 29 18:08:22 Fritz bluetoothd[622]: Endpoint registered: sender=:1.82 path=/MediaEndpoint/A2DPSink
Apr 29 18:08:22 Fritz bluetoothd[622]: Failed to set mode: Blocked through rfkill (0x12)
Apr 29 18:08:22 Fritz bluetoothd[622]: Failed to set mode: Blocked through rfkill (0x12)
Apr 29 18:09:16 Fritz bluetoothd[622]: Failed to set mode: Blocked through rfkill (0x12)
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Vom codeblock (links neben dem Smiley) hast du schon gehört/gelesen? Dein Problem wird hier zu suchen sein bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
|
olliolliolli
(Themenstarter)
Anmeldungsdatum: 29. April 2018
Beiträge: 16
|
Da habe ich leider noch nichts von gehört ... Kann man da was machen?
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Mal sehen.Zeige lsusb dmesg | egrep -i 'blue|firm'
|
olliolliolli
(Themenstarter)
Anmeldungsdatum: 29. April 2018
Beiträge: 16
|
lsusb: Bus 002 Device 002: ID 0bda:0401 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0bda:5775 Realtek Semiconductor Corp. HP "Truevision HD" laptop camera
Bus 001 Device 003: ID 0a5c:216c Broadcom Corp. BCM43142A0 Bluetooth Device
Bus 001 Device 002: ID 0bda:5401 Realtek Semiconductor Corp. RTL 8153 USB 3.0 hub with gigabit ethernet
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg | egrep -i 'blue|firm': [ 0.327816] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 24.753904] Bluetooth: Core ver 2.22
[ 24.753936] Bluetooth: HCI device and connection manager initialized
[ 24.753943] Bluetooth: HCI socket layer initialized
[ 24.753947] Bluetooth: L2CAP socket layer initialized
[ 24.753957] Bluetooth: SCO socket layer initialized
[ 24.830994] Bluetooth: HCI UART driver ver 2.3
[ 24.830998] Bluetooth: HCI UART protocol H4 registered
[ 24.830999] Bluetooth: HCI UART protocol BCSP registered
[ 24.831030] Bluetooth: HCI UART protocol LL registered
[ 24.831031] Bluetooth: HCI UART protocol ATH3K registered
[ 24.831032] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 24.831079] Bluetooth: HCI UART protocol Intel registered
[ 24.831115] Bluetooth: HCI UART protocol Broadcom registered
[ 24.831116] Bluetooth: HCI UART protocol QCA registered
[ 24.831117] Bluetooth: HCI UART protocol AG6XX registered
[ 24.831118] Bluetooth: HCI UART protocol Marvell registered
[ 24.916928] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 27.229628] Bluetooth: hci0: BCM: chip id 70
[ 27.230631] Bluetooth: hci0: BCM: features 0x06
[ 27.246628] Bluetooth: hci0: BCM43142A
[ 27.246634] Bluetooth: hci0: BCM (001.001.011) build 0000
[ 27.337248] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
[ 27.337255] Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
[ 29.376022] Bluetooth: hci0: command 0x1003 tx timeout
[ 34.878765] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.878768] Bluetooth: BNEP filters: protocol multicast
[ 34.878774] Bluetooth: BNEP socket layer initialized
[ 70.257609] Bluetooth: RFCOMM TTY layer initialized
[ 70.257619] Bluetooth: RFCOMM socket layer initialized
[ 70.257630] Bluetooth: RFCOMM ver 1.11
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Letzte Chance um es mir im codeblock zu zeigen dpkg -l broadcom*
|
olliolliolli
(Themenstarter)
Anmeldungsdatum: 29. April 2018
Beiträge: 16
|
dpkg -l broadcom*: hanz-diehta@Fritz:~$ [ 0.327816] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.753904] Bluetooth: Core ver 2.22
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.753936] Bluetooth: HCI device and connection manager initialized
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.753943] Bluetooth: HCI socket layer initialized
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.753947] Bluetooth: L2CAP socket layer initialized
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.753957] Bluetooth: SCO socket layer initialized
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.830994] Bluetooth: HCI UART driver ver 2.3
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.830998] Bluetooth: HCI UART protocol H4 registered
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.830999] Bluetooth: HCI UART protocol BCSP registeredbash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.831030] Bluetooth: HCI UART protocol LL registered
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.831031] Bluetooth: HCI UART protocol ATH3K registered
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.831032] Bluetooth: HCI UART protocol Three-wire (H5) registered
bash: Syntaxfehler beim unerwarteten Wort »(«
hanz-diehta@Fritz:~$ [ 24.831079] Bluetooth: HCI UART protocol Intel registered
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.831115] Bluetooth: HCI UART protocol Broadcom registered
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.831116] Bluetooth: HCI UART protocol QCA registered
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.831117] Bluetooth: HCI UART protocol AG6XX registered
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.831118] Bluetooth: HCI UART protocol Marvell registered
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 24.916928] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 27.229628] Bluetooth: hci0: BCM: chip id 70
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 27.230631] Bluetooth: hci0: BCM: features 0x06
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 27.246628] Bluetooth: hci0: BCM43142A
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 27.246634] Bluetooth: hci0: BCM (001.001.011) build 0000
bash: Syntaxfehler beim unerwarteten Wort »(«
hanz-diehta@Fritz:~$ [ 27.337248] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 27.337255] Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 29.376022] Bluetooth: hci0: command 0x1003 tx timeout
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 34.878765] Bluetooth: BNEP (Ethernet Emulation) ver 1.3bash: Syntaxfehler beim unerwarteten Wort »(«
hanz-diehta@Fritz:~$ [ 34.878768] Bluetooth: BNEP filters: protocol multicast
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 34.878774] Bluetooth: BNEP socket layer initialized
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 70.257609] Bluetooth: RFCOMM TTY layer initialized
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 70.257619] Bluetooth: RFCOMM socket layer initialized
bash: [: Fehlende »]«
hanz-diehta@Fritz:~$ [ 70.257630] Bluetooth: RFCOMM ver 1.11
|
toddy
Ikhayateam
Anmeldungsdatum: 31. Juli 2007
Beiträge: 9517
Wohnort: Lüneburg
|
Hi Olli, Kellerkind_2009 schrieb: Letzte Chance um es mir im codeblock zu zeigen
das scheinst Du noch nicht beachtet zu haben. Der Codeblock befindet sich in dem Eingabefenster bei einer Antwort hier im Forum über dem Eingabefeld. Bitte schau in unseren Erklärungen unter "Beiträge formatieren" nach, damit die Beiträge besser erkennbar sind. Danke! Liebe Grüße, Torsten
|
olliolliolli
(Themenstarter)
Anmeldungsdatum: 29. April 2018
Beiträge: 16
|
Oh Mann, das wusste ich nicht.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Die Firmware ist im Anhang,lade sie runter und entpache sie in deinem Download Ordner.Zeige danach ls ~/Downloads/BCM.hcd
- BCM.hcd.zip (19.7 KiB)
- Download BCM.hcd.zip
|
olliolliolli
(Themenstarter)
Anmeldungsdatum: 29. April 2018
Beiträge: 16
|
Bei: ls ~/Downloads/BCM.hcd kommt folgendes: | hanz-diehta@Fritz:~$ ls ~/Downloads/BCM.hcd
ls: Zugriff auf '/home/hanz-diehta/Downloads/BCM.hcd' nicht möglich: Datei oder Verzeichnis nicht gefunden
hanz-diehta@Fritz:~$
|
Bei: ls ~/Downloads/8964080-BCM.hcd (so heißt die Datei im Downloadordner) kommt: hanz-diehta@Fritz:~$ ls ~/Downloads/8964080-BCM.hcd
BCM.hcd
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Du hast die Datei nicht entpackt,also cd ~/Downloads dann unzip 8964080-BCM.hcd Dann möchte ich wieder sehen ls ~/Downloads/BCM.hcd
|
olliolliolli
(Themenstarter)
Anmeldungsdatum: 29. April 2018
Beiträge: 16
|
Die Datei 8964080-BCM.hcd.zip hatte ich im Downloadordner entpackt. Daraufhin erschien der Ordner mit dem Namen 8964080-BCM.hcd in dem befindet sich die Datei BCM.hcd Auf den Befehl ls ~/Downloads/BCM.hcd kommt wieder: Datei oder Verzeichnis nicht gefunden.
|