linux-pc@linux-pc-Aspire-X1700:~$ mkdir -p ~/Downloads/MFC-L2700DW
linux-pc@linux-pc-Aspire-X1700:~$ sudo apt purge printer-driver-brlaser printer-driver-ptouch
[sudo] Passwort für linux-pc:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
fonts-font-awesome fonts-liberation2 freerdp2-x11
libabw-0.1-1 libadplug-2.2.1-0v5 libaio1 libaudiofile1
libbinio1v5 libboost-date-time1.67.0
libboost-filesystem1.67.0 libboost-iostreams1.67.0
libboost-locale1.67.0 libboost-system1.67.0
libboost-thread1.67.0 libcdio-cdda2 libcdio-paranoia2
libcdr-0.1-1 libclucene-contribs1v5 libclucene-core1v5
libcmis-0.5-5v5 libcolamd2 libe-book-0.1-1 libebur128-1
libeot0 libepubgen-0.1-1 libetonyek-0.1-1
libexttextcat-2.0-0 libexttextcat-data libfluidsynth1
libfreecell-solver0 libfreehand-0.1-1 libfreerdp-client2-2
libfreerdp2-2 libgrantlee-textdocument5 libharfbuzz-icu0
libical2 libid3tag0 libjs-sphinxdoc libkf5plotting5
libkf5webkit5 libkgantt2 libkgantt2-l10n libkolabxml1v5
libktorrent-l10n libktorrent6 liblangtag-common
liblangtag1 libmhash2 libmikmod3 libmms0 libmodplug1
libmpdclient2 libmspub-0.1-1 libmwaw-0.3-3 libmythes-1.2-0
libodfgen-0.1-1 libopenal-data libopenal1 liborcus-0.14-0
libpagemaker-0.0-0 libqgpgme7 libqt5networkauth5
libraptor2-0 librasqal3 librdf0 librevenge-0.0-0
libsdl2-2.0-0 libsidplayfp4 libsuitesparseconfig5
libvisio-0.1-1 libvncclient1 libwildmidi2 libwinpr2-2
libwpd-0.10-10 libwpg-0.3-3 libwps-0.4-4 libxerces-c3.2
libxmlsec1 libxmlsec1-nss libyajl2 libzzip-0-13 lp-solve
paperkey
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
Die folgenden Pakete werden ENTFERNT:
printer-driver-brlaser* printer-driver-ptouch*
0 aktualisiert, 0 neu installiert, 2 zu entfernen und 236 nicht aktualisiert.
Nach dieser Operation werden 133 kB Plattenplatz freigegeben.
Möchten Sie fortfahren? [J/n] j
(Lese Datenbank ... 198796 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von printer-driver-brlaser (4-1) ...
Entfernen von printer-driver-ptouch (1.4.2-3) ...
Trigger für cups (2.2.10-4) werden verarbeitet ...
Updating PPD files for cups-filters ...
Updating PPD files for foomatic-db-compressed-ppds ...
Updating PPD files for openprinting-ppds ...
Updating PPD files for c2esp ...
Updating PPD files for foo2zjs-common ...
Updating PPD files for gutenprint ...
Updating PPD files for hpcups ...
Updating PPD files for m2300w ...
Updating PPD files for postscript-hp ...
Updating PPD files for pxljr ...
Updating PPD files for sag-gdi ...
Updating PPD files for splix ...
linux-pc@linux-pc-Aspire-X1700:~$ sudo apt install lib32z1 lib32ncurses6 csh lpr libusb-0.1-4
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
fonts-font-awesome fonts-liberation2 freerdp2-x11
libabw-0.1-1 libadplug-2.2.1-0v5 libaio1 libaudiofile1
libbinio1v5 libboost-date-time1.67.0
libboost-filesystem1.67.0 libboost-iostreams1.67.0
libboost-locale1.67.0 libboost-system1.67.0
libboost-thread1.67.0 libcdio-cdda2 libcdio-paranoia2
libcdr-0.1-1 libclucene-contribs1v5 libclucene-core1v5
libcmis-0.5-5v5 libcolamd2 libe-book-0.1-1 libebur128-1
libeot0 libepubgen-0.1-1 libetonyek-0.1-1
libexttextcat-2.0-0 libexttextcat-data libfluidsynth1
libfreecell-solver0 libfreehand-0.1-1 libfreerdp-client2-2
libfreerdp2-2 libgrantlee-textdocument5 libharfbuzz-icu0
libical2 libid3tag0 libjs-sphinxdoc libkf5plotting5
libkf5webkit5 libkgantt2 libkgantt2-l10n libkolabxml1v5
libktorrent-l10n libktorrent6 liblangtag-common
liblangtag1 libmhash2 libmikmod3 libmms0 libmodplug1
libmpdclient2 libmspub-0.1-1 libmwaw-0.3-3 libmythes-1.2-0
libodfgen-0.1-1 libopenal-data libopenal1 liborcus-0.14-0
libpagemaker-0.0-0 libqgpgme7 libqt5networkauth5
libraptor2-0 librasqal3 librdf0 librevenge-0.0-0
libsdl2-2.0-0 libsidplayfp4 libsuitesparseconfig5
libvisio-0.1-1 libvncclient1 libwildmidi2 libwinpr2-2
libwpd-0.10-10 libwpg-0.3-3 libwps-0.4-4 libxerces-c3.2
libxmlsec1 libxmlsec1-nss libyajl2 libzzip-0-13 lp-solve
paperkey
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
Die folgenden zusätzlichen Pakete werden installiert:
cups cups-client cups-common cups-core-drivers cups-daemon
cups-ipp-utils cups-server-common lib32tinfo6 libc6-i386
libcups2 libcupsimage2
Vorgeschlagene Pakete:
cups-bsd cups-pdf smbclient magicfilter | apsfilter
Die folgenden Pakete werden ENTFERNT:
cups-bsd
Die folgenden NEUEN Pakete werden installiert:
csh lib32ncurses6 lib32tinfo6 lib32z1 libc6-i386
libusb-0.1-4 lpr
Die folgenden Pakete werden aktualisiert (Upgrade):
cups cups-client cups-common cups-core-drivers cups-daemon
cups-ipp-utils cups-server-common libcups2 libcupsimage2
9 aktualisiert, 7 neu installiert, 1 zu entfernen und 226 nicht aktualisiert.
Es müssen 5.065 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 15,6 MB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] j
Holen:1 http://de.archive.ubuntu.com/ubuntu disco-updates/universe amd64 csh amd64 20110502-4ubuntu0.19.04.1 [243 kB]
Holen:2 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libcupsimage2 amd64 2.2.10-4ubuntu2.1 [18,4 kB]
Holen:3 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 cups-ipp-utils amd64 2.2.10-4ubuntu2.1 [211 kB]
Holen:4 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 cups-daemon amd64 2.2.10-4ubuntu2.1 [314 kB]
Holen:5 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 cups-core-drivers amd64 2.2.10-4ubuntu2.1 [27,9 kB]
Holen:6 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 cups-server-common all 2.2.10-4ubuntu2.1 [415 kB]
Holen:7 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 cups-common all 2.2.10-4ubuntu2.1 [206 kB]
Holen:8 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 cups-client amd64 2.2.10-4ubuntu2.1 [140 kB]
Holen:9 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 cups amd64 2.2.10-4ubuntu2.1 [263 kB]
Holen:10 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libcups2 amd64 2.2.10-4ubuntu2.1 [211 kB]
Holen:11 http://de.archive.ubuntu.com/ubuntu disco/main amd64 libc6-i386 amd64 2.29-0ubuntu2 [2.658 kB]
Holen:12 http://de.archive.ubuntu.com/ubuntu disco/main amd64 lib32tinfo6 amd64 6.1+20181013-2ubuntu2 [83,3 kB]
Holen:13 http://de.archive.ubuntu.com/ubuntu disco/main amd64 lib32ncurses6 amd64 6.1+20181013-2ubuntu2 [107 kB]
Holen:14 http://de.archive.ubuntu.com/ubuntu disco/main amd64 lib32z1 amd64 1:1.2.11.dfsg-1ubuntu2 [55,9 kB]
Holen:15 http://de.archive.ubuntu.com/ubuntu disco/main amd64 libusb-0.1-4 amd64 2:0.1.12-32 [17,4 kB]
Holen:16 http://de.archive.ubuntu.com/ubuntu disco/universe amd64 lpr amd64 1:2008.05.17.3 [93,9 kB]
Es wurden 5.065 kB in 1 s geholt (5.871 kB/s).
Vorkonfiguration der Pakete ...
(Lese Datenbank ... 198783 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von cups-bsd (2.2.10-4) ...
Vormals nicht ausgewähltes Paket csh wird gewählt.
(Lese Datenbank ... 198767 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../00-csh_20110502-4ubuntu0.19.04.1_amd64.deb ...
Entpacken von csh (20110502-4ubuntu0.19.04.1) ...
Vorbereitung zum Entpacken von .../01-libcupsimage2_2.2.10-4ubuntu2.1_amd64.deb ...
Entpacken von libcupsimage2:amd64 (2.2.10-4ubuntu2.1) über (2.2.10-4) ...
Vorbereitung zum Entpacken von .../02-cups-ipp-utils_2.2.10-4ubuntu2.1_amd64.deb ...
Entpacken von cups-ipp-utils (2.2.10-4ubuntu2.1) über (2.2.10-4) ...
Vorbereitung zum Entpacken von .../03-cups-daemon_2.2.10-4ubuntu2.1_amd64.deb ...
Entpacken von cups-daemon (2.2.10-4ubuntu2.1) über (2.2.10-4) ...
Vorbereitung zum Entpacken von .../04-cups-core-drivers_2.2.10-4ubuntu2.1_amd64.deb ...
Entpacken von cups-core-drivers (2.2.10-4ubuntu2.1) über (2.2.10-4) ...
Vorbereitung zum Entpacken von .../05-cups-server-common_2.2.10-4ubuntu2.1_all.deb ...
Entpacken von cups-server-common (2.2.10-4ubuntu2.1) über (2.2.10-4) ...
Vorbereitung zum Entpacken von .../06-cups-common_2.2.10-4ubuntu2.1_all.deb ...
Entpacken von cups-common (2.2.10-4ubuntu2.1) über (2.2.10-4) ...
Vorbereitung zum Entpacken von .../07-cups-client_2.2.10-4ubuntu2.1_amd64.deb ...
Entpacken von cups-client (2.2.10-4ubuntu2.1) über (2.2.10-4) ...
Vorbereitung zum Entpacken von .../08-cups_2.2.10-4ubuntu2.1_amd64.deb ...
Entpacken von cups (2.2.10-4ubuntu2.1) über (2.2.10-4) ...
Vorbereitung zum Entpacken von .../09-libcups2_2.2.10-4ubuntu2.1_amd64.deb ...
Entpacken von libcups2:amd64 (2.2.10-4ubuntu2.1) über (2.2.10-4) ...
Vormals nicht ausgewähltes Paket libc6-i386 wird gewählt.
Vorbereitung zum Entpacken von .../10-libc6-i386_2.29-0ubuntu2_amd64.deb ...
Entpacken von libc6-i386 (2.29-0ubuntu2) ...
Vormals nicht ausgewähltes Paket lib32tinfo6 wird gewählt.
Vorbereitung zum Entpacken von .../11-lib32tinfo6_6.1+20181013-2ubuntu2_amd64.deb ...
Entpacken von lib32tinfo6 (6.1+20181013-2ubuntu2) ...
Vormals nicht ausgewähltes Paket lib32ncurses6 wird gewählt.
Vorbereitung zum Entpacken von .../12-lib32ncurses6_6.1+20181013-2ubuntu2_amd64.deb ...
Entpacken von lib32ncurses6 (6.1+20181013-2ubuntu2) ...
Vormals nicht ausgewähltes Paket lib32z1 wird gewählt.
Vorbereitung zum Entpacken von .../13-lib32z1_1%3a1.2.11.dfsg-1ubuntu2_amd64.deb ...
Entpacken von lib32z1 (1:1.2.11.dfsg-1ubuntu2) ...
Vormals nicht ausgewähltes Paket libusb-0.1-4:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../14-libusb-0.1-4_2%3a0.1.12-32_amd64.deb ...
Entpacken von libusb-0.1-4:amd64 (2:0.1.12-32) ...
Vormals nicht ausgewähltes Paket lpr wird gewählt.
Vorbereitung zum Entpacken von .../15-lpr_1%3a2008.05.17.3_amd64.deb ...
Entpacken von lpr (1:2008.05.17.3) ...
csh (20110502-4ubuntu0.19.04.1) wird eingerichtet ...
update-alternatives: /bin/bsd-csh wird verwendet, um /bin/csh (csh) im automatischen Modus bereitzustellen
cups-server-common (2.2.10-4ubuntu2.1) wird eingerichtet ...
cups-common (2.2.10-4ubuntu2.1) wird eingerichtet ...
libusb-0.1-4:amd64 (2:0.1.12-32) wird eingerichtet ...
libcups2:amd64 (2.2.10-4ubuntu2.1) wird eingerichtet ...
lpr (1:2008.05.17.3) wird eingerichtet ...
libc6-i386 (2.29-0ubuntu2) wird eingerichtet ...
cups-ipp-utils (2.2.10-4ubuntu2.1) wird eingerichtet ...
lib32z1 (1:1.2.11.dfsg-1ubuntu2) wird eingerichtet ...
libcupsimage2:amd64 (2.2.10-4ubuntu2.1) wird eingerichtet ...
cups-daemon (2.2.10-4ubuntu2.1) wird eingerichtet ...
lib32tinfo6 (6.1+20181013-2ubuntu2) wird eingerichtet ...
cups-core-drivers (2.2.10-4ubuntu2.1) wird eingerichtet ...
lib32ncurses6 (6.1+20181013-2ubuntu2) wird eingerichtet ...
cups-client (2.2.10-4ubuntu2.1) wird eingerichtet ...
cups (2.2.10-4ubuntu2.1) wird eingerichtet ...
Updating PPD files for cups ...
Trigger für ufw (0.36-1ubuntu1) werden verarbeitet ...
Trigger für systemd (240-6ubuntu5) werden verarbeitet ...
Trigger für man-db (2.8.5-2) werden verarbeitet ...
Trigger für libc-bin (2.29-0ubuntu2) werden verarbeitet ...
linux-pc@linux-pc-Aspire-X1700:~$ sudo mkdir -p /var/spool/lpd
linux-pc@linux-pc-Aspire-X1700:~$ sudo mkdir -p /usr/share/cups/model
linux-pc@linux-pc-Aspire-X1700:~$ mkdir -p ~/Brother-MFC-L2700DN
linux-pc@linux-pc-Aspire-X1700:~$ cd ~/Downloads/MFC-L2700DW
linux-pc@linux-pc-Aspire-X1700:~/Downloads/MFC-L2700DW$ wget https://download.brother.com/welcome/dlf006893/linux-brprinter-installer-2.2.1-1.gz
--2019-10-11 23:43:28-- https://download.brother.com/welcome/dlf006893/linux-brprinter-installer-2.2.1-1.gz
Auflösen des Hostnamens download.brother.com (download.brother.com) … 23.52.12.91
Verbindungsaufbau zu download.brother.com (download.brother.com)|23.52.12.91|:443 … verbunden.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK
Länge: 24694 (24K) [application/x-gzip]
Wird in »linux-brprinter-installer-2.2.1-1.gz« gespeichert.
linux-brprinter-inst 100%[===================>] 24,12K --.-KB/s in 0,003s
2019-10-11 23:43:28 (8,67 MB/s) - »linux-brprinter-installer-2.2.1-1.gz« gespeichert [24694/24694]
linux-pc@linux-pc-Aspire-X1700:~/Downloads/MFC-L2700DW$ wget http://download.brother.com/welcome/dlf006654/brother-udev-rule-type1-1.0.2-0.all.deb
--2019-10-11 23:43:47-- http://download.brother.com/welcome/dlf006654/brother-udev-rule-type1-1.0.2-0.all.deb
Auflösen des Hostnamens download.brother.com (download.brother.com) … 23.52.12.91
Verbindungsaufbau zu download.brother.com (download.brother.com)|23.52.12.91|:80 … verbunden.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK
Länge: 1558 (1,5K) [image/x-deb]
Wird in »brother-udev-rule-type1-1.0.2-0.all.deb« gespeichert.
brother-udev-rule-type1 100%[============================>] 1,52K --.-KB/s in 0s
2019-10-11 23:43:48 (77,9 MB/s) - »brother-udev-rule-type1-1.0.2-0.all.deb« gespeichert [1558/1558]
linux-pc@linux-pc-Aspire-X1700:~/Downloads/MFC-L2700DW$ gunzip linux-brprinter-installer-2.2.1-1.gz
linux-pc@linux-pc-Aspire-X1700:~/Downloads/MFC-L2700DW$ chmod a+rx linux-brprinter-installer-2.2.1-1
linux-pc@linux-pc-Aspire-X1700:~/Downloads/MFC-L2700DW$ sudo bash linux-brprinter-installer-2.2.1-1 MFC-L2700DW
You are going to install following packages.
mfcl2700dwlpr-3.2.0-1.i386.deb
mfcl2700dwcupswrapper-3.2.0-1.i386.deb
brscan4-0.4.8-1.amd64.deb
brscan-skey-0.2.4-1.amd64.deb
OK? [y/N] ->y
=========================================
Brother License Agreement
Brother retains any and all copyrights to the Software. In no case this Agreement shall be construed to assign or otherwise transfer from Brother to User any copyrights or other intellectual property rights to whole or any part of the Software.
Brother grants User a non-exclusive license: to reproduce and/or distribute (via Internet or in any other manner) the Software. Further, Brother grants User a non-exclusive license to modify, alter, translate or otherwise prepare derivative works of the Software and to reproduce and distribute (via Internet or in any other manner) such modification, alteration, translation or other derivative works for any purpose.
The license of the Software from Brother hereunder is granted "AS IS." BROTHER HEREBY DISCLAIMS ANY WARRANTIES WITH RESPECT TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY FOR THE QUALITY, MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT.
Brother shall have no liability in contract, tort (including negligence or breach of statutory duty) or otherwise for any interruption of use, loss of data, or for any indirect, incidental, punitive or consequential loss or damage, or for any loss of profit, revenue, data, goodwill or anticipated savings that arises under, out of, or in contemplation of this Agreement or otherwise arises due to any error, inaccuracy or defect in the Software even if Brother has been advised of the possibility of such loss or damage.
Further, Brother shall have no liability to disclose and/or distribute the source cord of the Software to User under any circumstances. In no case shall the above license by Brother to modify, alter, translate or otherwise prepare derivative works of the Software be construed as Brother's implied agreement or undertakings to disclose and/or distribute the source cord of the Software.
=========================================
Do you agree? [Y/n] ->y
wget -T 10 -nd --no-cache http://www.brother.com/pub/bsc/linux/packages/mfcl2700dwlpr-3.2.0-1.i386.deb
--2019-10-11 23:44:47-- http://www.brother.com/pub/bsc/linux/packages/mfcl2700dwlpr-3.2.0-1.i386.deb
Auflösen des Hostnamens www.brother.com (www.brother.com) … 104.81.55.211
Verbindungsaufbau zu www.brother.com (www.brother.com)|104.81.55.211|:80 … verbunden.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK
Länge: 35580 (35K) [application/x-troff-man]
Wird in »mfcl2700dwlpr-3.2.0-1.i386.deb« gespeichert.
mfcl2700dwlpr-3.2.0-1.i 100%[============================>] 34,75K --.-KB/s in 0,009s
2019-10-11 23:44:47 (3,90 MB/s) - »mfcl2700dwlpr-3.2.0-1.i386.deb« gespeichert [35580/35580]
=========================================
GPL License Agreement
This Software may be used in accordance with GNU General Public License (GPL). Please read carefully the following GPL and click on "I Accept" button. If you cannot agree with the following terms, please click "I don't Accept" button. In case of your non-acceptance, you can not use this Software.
Note:
Please click on "I Accept" while holding down "Shift" or right click on "I Accept" and select "Save Target As,,," from the menu.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision
comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License.
=========================================
Do you agree? [Y/n] ->y
wget -T 10 -nd --no-cache http://www.brother.com/pub/bsc/linux/packages/mfcl2700dwcupswrapper-3.2.0-1.i386.deb
--2019-10-11 23:44:50-- http://www.brother.com/pub/bsc/linux/packages/mfcl2700dwcupswrapper-3.2.0-1.i386.deb
Auflösen des Hostnamens www.brother.com (www.brother.com) … 104.81.55.211
Verbindungsaufbau zu www.brother.com (www.brother.com)|104.81.55.211|:80 … verbunden.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK
Länge: 18994 (19K) [application/x-troff-man]
Wird in »mfcl2700dwcupswrapper-3.2.0-1.i386.deb« gespeichert.
mfcl2700dwcupswrapper-3 100%[============================>] 18,55K --.-KB/s in 0,005s
2019-10-11 23:44:51 (3,93 MB/s) - »mfcl2700dwcupswrapper-3.2.0-1.i386.deb« gespeichert [18994/18994]
OK:1 http://de.archive.ubuntu.com/ubuntu disco InRelease
OK:2 http://de.archive.ubuntu.com/ubuntu disco-updates InRelease
OK:3 https://deb.opera.com/opera-stable stable InRelease
OK:4 http://de.archive.ubuntu.com/ubuntu disco-backports InRelease
OK:5 http://security.ubuntu.com/ubuntu disco-security InRelease
Paketlisten werden gelesen... Fertig
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Paket ia32-libs ist nicht verfügbar, wird aber von einem anderen Paket
referenziert. Das kann heißen, dass das Paket fehlt, dass es abgelöst
wurde oder nur aus einer anderen Quelle verfügbar ist.
Doch die folgenden Pakete ersetzen es:
lib32z1
E: Für Paket »ia32-libs« existiert kein Installationskandidat.
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
fonts-font-awesome fonts-liberation2 freerdp2-x11 libabw-0.1-1 libadplug-2.2.1-0v5
libaio1 libaudiofile1 libbinio1v5 libboost-date-time1.67.0 libboost-filesystem1.67.0
libboost-iostreams1.67.0 libboost-locale1.67.0 libboost-system1.67.0
libboost-thread1.67.0 libcdio-cdda2 libcdio-paranoia2 libcdr-0.1-1 libclucene-contribs1v5
libclucene-core1v5 libcmis-0.5-5v5 libcolamd2 libe-book-0.1-1 libebur128-1 libeot0
libepubgen-0.1-1 libetonyek-0.1-1 libexttextcat-2.0-0 libexttextcat-data libfluidsynth1
libfreecell-solver0 libfreehand-0.1-1 libfreerdp-client2-2 libfreerdp2-2
libgrantlee-textdocument5 libharfbuzz-icu0 libical2 libid3tag0 libjs-sphinxdoc
libkf5plotting5 libkf5webkit5 libkgantt2 libkgantt2-l10n libkolabxml1v5 libktorrent-l10n
libktorrent6 liblangtag-common liblangtag1 libmhash2 libmikmod3 libmms0 libmodplug1
libmpdclient2 libmspub-0.1-1 libmwaw-0.3-3 libmythes-1.2-0 libodfgen-0.1-1 libopenal-data
libopenal1 liborcus-0.14-0 libpagemaker-0.0-0 libqgpgme7 libqt5networkauth5 libraptor2-0
librasqal3 librdf0 librevenge-0.0-0 libsdl2-2.0-0 libsidplayfp4 libsuitesparseconfig5
libvisio-0.1-1 libvncclient1 libwildmidi2 libwinpr2-2 libwpd-0.10-10 libwpg-0.3-3
libwps-0.4-4 libxerces-c3.2 libxmlsec1 libxmlsec1-nss libyajl2 libzzip-0-13 lp-solve
paperkey
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
Die folgenden zusätzlichen Pakete werden installiert:
gcc-9-base lib32gcc1 libasan5 libatomic1 libcc1-0 libgcc1 libgomp1 libitm1 liblsan0
libobjc4 libquadmath0 libstdc++6 libtsan0 libubsan1
Die folgenden NEUEN Pakete werden installiert:
lib32gcc1 lib32stdc++6
Die folgenden Pakete werden aktualisiert (Upgrade):
gcc-9-base libasan5 libatomic1 libcc1-0 libgcc1 libgomp1 libitm1 liblsan0 libobjc4
libquadmath0 libstdc++6 libtsan0 libubsan1
13 aktualisiert, 2 neu installiert, 0 zu entfernen und 213 nicht aktualisiert.
Es müssen 2.475 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 2.493 kB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] j
Holen:1 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libubsan1 amd64 9.1.0-2ubuntu2~19.04 [130 kB]
Holen:2 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libtsan0 amd64 9.1.0-2ubuntu2~19.04 [300 kB]
Holen:3 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 gcc-9-base amd64 9.1.0-2ubuntu2~19.04 [17,7 kB]
Holen:4 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libstdc++6 amd64 9.1.0-2ubuntu2~19.04 [509 kB]
Holen:5 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libquadmath0 amd64 9.1.0-2ubuntu2~19.04 [145 kB]
Holen:6 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libobjc4 amd64 9.1.0-2ubuntu2~19.04 [46,7 kB]
Holen:7 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 liblsan0 amd64 9.1.0-2ubuntu2~19.04 [139 kB]
Holen:8 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libitm1 amd64 9.1.0-2ubuntu2~19.04 [28,0 kB]
Holen:9 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libgomp1 amd64 9.1.0-2ubuntu2~19.04 [89,0 kB]
Holen:10 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libcc1-0 amd64 9.1.0-2ubuntu2~19.04 [48,5 kB]
Holen:11 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libatomic1 amd64 9.1.0-2ubuntu2~19.04 [9.168 B]
Holen:12 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libasan5 amd64 9.1.0-2ubuntu2~19.04 [393 kB]
Holen:13 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 libgcc1 amd64 1:9.1.0-2ubuntu2~19.04 [40,6 kB]
Holen:14 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 lib32gcc1 amd64 1:9.1.0-2ubuntu2~19.04 [47,9 kB]
Holen:15 http://de.archive.ubuntu.com/ubuntu disco-updates/main amd64 lib32stdc++6 amd64 9.1.0-2ubuntu2~19.04 [531 kB]
Es wurden 2.475 kB in 0 s geholt (5.137 kB/s).
(Lese Datenbank ... 199139 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../libubsan1_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von libubsan1:amd64 (9.1.0-2ubuntu2~19.04) über (9-20190402-1ubuntu1) ...
Vorbereitung zum Entpacken von .../libtsan0_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von libtsan0:amd64 (9.1.0-2ubuntu2~19.04) über (9-20190402-1ubuntu1) ...
Vorbereitung zum Entpacken von .../gcc-9-base_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von gcc-9-base:amd64 (9.1.0-2ubuntu2~19.04) über (9-20190402-1ubuntu1) ...
gcc-9-base:amd64 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
(Lese Datenbank ... 199139 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../libstdc++6_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von libstdc++6:amd64 (9.1.0-2ubuntu2~19.04) über (9-20190402-1ubuntu1) ...
libstdc++6:amd64 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
(Lese Datenbank ... 199139 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../0-libquadmath0_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von libquadmath0:amd64 (9.1.0-2ubuntu2~19.04) über (9-20190402-1ubuntu1) ...
Vorbereitung zum Entpacken von .../1-libobjc4_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von libobjc4:amd64 (9.1.0-2ubuntu2~19.04) über (9-20190402-1ubuntu1) ...
Vorbereitung zum Entpacken von .../2-liblsan0_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von liblsan0:amd64 (9.1.0-2ubuntu2~19.04) über (9-20190402-1ubuntu1) ...
Vorbereitung zum Entpacken von .../3-libitm1_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von libitm1:amd64 (9.1.0-2ubuntu2~19.04) über (9-20190402-1ubuntu1) ...
Vorbereitung zum Entpacken von .../4-libgomp1_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von libgomp1:amd64 (9.1.0-2ubuntu2~19.04) über (9-20190402-1ubuntu1) ...
Vorbereitung zum Entpacken von .../5-libcc1-0_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von libcc1-0:amd64 (9.1.0-2ubuntu2~19.04) über (9-20190402-1ubuntu1) ...
Vorbereitung zum Entpacken von .../6-libatomic1_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von libatomic1:amd64 (9.1.0-2ubuntu2~19.04) über (9-20190402-1ubuntu1) ...
Vorbereitung zum Entpacken von .../7-libasan5_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von libasan5:amd64 (9.1.0-2ubuntu2~19.04) über (9-20190402-1ubuntu1) ...
Vorbereitung zum Entpacken von .../8-libgcc1_1%3a9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von libgcc1:amd64 (1:9.1.0-2ubuntu2~19.04) über (1:9-20190402-1ubuntu1) ...
libgcc1:amd64 (1:9.1.0-2ubuntu2~19.04) wird eingerichtet ...
Vormals nicht ausgewähltes Paket lib32gcc1 wird gewählt.
(Lese Datenbank ... 199139 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../lib32gcc1_1%3a9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von lib32gcc1 (1:9.1.0-2ubuntu2~19.04) ...
Vormals nicht ausgewähltes Paket lib32stdc++6 wird gewählt.
Vorbereitung zum Entpacken von .../lib32stdc++6_9.1.0-2ubuntu2~19.04_amd64.deb ...
Entpacken von lib32stdc++6 (9.1.0-2ubuntu2~19.04) ...
libobjc4:amd64 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
libgomp1:amd64 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
lib32gcc1 (1:9.1.0-2ubuntu2~19.04) wird eingerichtet ...
libasan5:amd64 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
lib32stdc++6 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
libquadmath0:amd64 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
libatomic1:amd64 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
libubsan1:amd64 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
libcc1-0:amd64 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
liblsan0:amd64 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
libitm1:amd64 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
libtsan0:amd64 (9.1.0-2ubuntu2~19.04) wird eingerichtet ...
Trigger für libc-bin (2.29-0ubuntu2) werden verarbeitet ...
dpkg -x mfcl2700dwlpr-3.2.0-1.i386.deb /
dpkg -x mfcl2700dwcupswrapper-3.2.0-1.i386.deb /
dpkg-deb: Paket »mfcl2700dwlpr« wird in »mfcl2700dwlpr-3.2.0-1a.i386.deb« gebaut.
dpkg -b ./brother_driver_packdir mfcl2700dwlpr-3.2.0-1a.i386.deb
dpkg-deb: Paket »mfcl2700dwcupswrapper« wird in »mfcl2700dwcupswrapper-3.2.0-1a.i386.deb« gebaut.
dpkg -b ./brother_driver_packdir mfcl2700dwcupswrapper-3.2.0-1a.i386.deb
dpkg -i --force-all mfcl2700dwlpr-3.2.0-1a.i386.deb
Vormals nicht ausgewähltes Paket mfcl2700dwlpr:i386 wird gewählt.
(Lese Datenbank ... 199146 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von mfcl2700dwlpr-3.2.0-1a.i386.deb ...
Entpacken von mfcl2700dwlpr:i386 (3.2.0-1) ...
mfcl2700dwlpr:i386 (3.2.0-1) wird eingerichtet ...
dpkg -i --force-all mfcl2700dwcupswrapper-3.2.0-1a.i386.deb
Vormals nicht ausgewähltes Paket mfcl2700dwcupswrapper:i386 wird gewählt.
(Lese Datenbank ... 199164 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von mfcl2700dwcupswrapper-3.2.0-1a.i386.deb ...
Entpacken von mfcl2700dwcupswrapper:i386 (3.2.0-1) ...
mfcl2700dwcupswrapper:i386 (3.2.0-1) wird eingerichtet ...
lpadmin -p MFCL2700DW -E -v usb://dev/usb/lp0 -P /usr/share/ppd/brother/brother-MFCL2700DW-cups-en.ppd
#
Will you specify the Device URI? [Y/n] ->y
0: http
1: ipp
2: beh
3: cups-brf:/
4: https
5: socket
6: serial:/dev/ttyS0?baud=115200
7: lpd
8: ipps
9: hp
10: hpfax
11 (I): Specify IP address.
12 (A): Auto. (usb://dev/usblp0)
select the number of destination Device URI. ->