ubuntuusers.de

ZFS Raid degraded

Status: Ungelöst | Ubuntu-Version: Ubuntu 20.04 (Focal Fossa)
Antworten |

UbuntuRobbi

Anmeldungsdatum:
1. August 2022

Beiträge: Zähle...

Hallo in die Runde!

Mein zpool meldet den Status degraded. Meine Kernfrage lautet: Ist die Platte wirklich kaputt? Neue Platte kaufen oder liegt es an den Kabeln/Mainboard?

Zpool status:

$ sudo zpool status
  pool: tank
 state: DEGRADED
status: One or more devices are faulted in response to persistent errors.
	Sufficient replicas exist for the pool to continue functioning in a
	degraded state.
action: Replace the faulted device, or use 'zpool clear' to mark the device
	repaired.
  scan: scrub repaired 0B in 0 days 05:37:58 with 0 errors on Sun Jul 10 06:02:00 2022
config:

	NAME                                  STATE     READ WRITE CKSUM
	tank                                  DEGRADED     0     0     0
	  raidz1-0                            DEGRADED     0     0     0
	    ata-TOSHIBA_DT01ACA300_16FTPZ3GS  ONLINE       0     0     0
	    ata-TOSHIBA_DT01ACA300_16FTPZKGS  FAULTED      0    82     0  too many errors
	    ata-TOSHIBA_DT01ACA300_16FTRPKGS  ONLINE       0     0     0

errors: No known data errors

smartctl sagt folgendes:

$ sudo smartctl -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-122-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" DT01ACA... Desktop HDD
Device Model:     TOSHIBA DT01ACA300
Serial Number:    16FTPZKGS
LU WWN Device Id: 5 000039 fe3cb3b70
Firmware Version: MX6OABB0
User Capacity:    3.000.592.982.016 bytes [3,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Mon Aug  1 22:13:47 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x85)	Offline data collection activity
					was aborted by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 247)	Self-test routine in progress...
					70% of test remaining.
Total time to complete Offline 
data collection: 		(21361) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 356) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   139   139   054    Pre-fail  Offline      -       70
  3 Spin_Up_Time            0x0007   128   128   024    Pre-fail  Always       -       447 (Average 446)
  4 Start_Stop_Count        0x0012   098   098   000    Old_age   Always       -       8292
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   124   124   020    Pre-fail  Offline      -       33
  9 Power_On_Hours          0x0012   096   096   000    Old_age   Always       -       32499
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       104
192 Power-Off_Retract_Count 0x0032   065   065   000    Old_age   Always       -       43195
193 Load_Cycle_Count        0x0012   065   065   000    Old_age   Always       -       43195
194 Temperature_Celsius     0x0002   157   157   000    Old_age   Always       -       38 (Min/Max 17/51)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   198   198   000    Old_age   Always       -       22

SMART Error Log Version: 1
ATA Error Count: 22 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 22 occurred at disk power-on lifetime: 32497 hours (1354 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 68 18 d8 aa 0a  Error: ICRC, ABRT 104 sectors at LBA = 0x0aaad818 = 178968600

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  35 00 78 08 d8 aa e0 08      00:05:30.874  WRITE DMA EXT
  35 00 20 d8 d7 aa e0 08      00:05:30.874  WRITE DMA EXT
  25 00 08 60 84 1b e0 08      00:05:30.850  READ DMA EXT
  c8 00 10 10 0a 00 e0 08      00:05:30.826  READ DMA
  25 00 08 50 8f 0c e0 08      00:05:30.819  READ DMA EXT

Error 21 occurred at disk power-on lifetime: 32497 hours (1354 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 29 e7 4f 00 08  Error: ICRC, ABRT 41 sectors at LBA = 0x08004fe7 = 134238183

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  35 00 a8 68 4f 00 e0 08      00:05:30.171  WRITE DMA EXT
  35 00 98 d0 4d 00 e0 08      00:05:30.169  WRITE DMA EXT
  25 00 08 b0 24 11 e0 08      00:05:30.157  READ DMA EXT
  35 00 08 c0 4d 00 e0 08      00:05:30.157  WRITE DMA EXT
  25 00 08 a0 bd 23 e0 08      00:05:30.138  READ DMA EXT

Error 20 occurred at disk power-on lifetime: 32497 hours (1354 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 78 b8 4c 00 08  Error: ICRC, ABRT 120 sectors at LBA = 0x08004cb8 = 134237368

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  35 00 88 a8 4c 00 e0 08      00:05:25.271  WRITE DMA EXT
  35 00 08 28 27 01 e0 08      00:05:25.271  WRITE DMA EXT
  35 00 30 c0 d4 aa e0 08      00:05:25.271  WRITE DMA EXT
  35 00 20 80 d4 aa e0 08      00:05:25.271  WRITE DMA EXT
  35 00 40 38 d4 aa e0 08      00:05:25.271  WRITE DMA EXT

Error 19 occurred at disk power-on lifetime: 32497 hours (1354 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 4f 88 55 05  Error: ICRC, ABRT 1 sectors at LBA = 0x0555884f = 89491535

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  35 00 08 48 88 55 e0 08      00:05:23.359  WRITE DMA EXT
  35 00 08 30 88 55 e0 08      00:05:23.359  WRITE DMA EXT
  35 00 08 a8 87 55 e0 08      00:05:23.359  WRITE DMA EXT
  35 00 08 88 75 1b e0 08      00:05:23.358  WRITE DMA EXT
  35 00 08 d0 fe e3 e0 08      00:05:23.358  WRITE DMA EXT

Error 18 occurred at disk power-on lifetime: 32497 hours (1354 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 ff c4 ab 0a  Error: ICRC, ABRT 1 sectors at LBA = 0x0aabc4ff = 179029247

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  35 00 08 f8 c4 ab e0 08      00:05:22.665  WRITE DMA EXT
  35 00 08 d8 d6 aa e0 08      00:05:22.665  WRITE DMA EXT
  35 00 08 80 d6 aa e0 08      00:05:22.665  WRITE DMA EXT
  35 00 10 18 27 01 e0 08      00:05:22.665  WRITE DMA EXT
  35 00 08 18 f2 00 e0 08      00:05:22.665  WRITE DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     32497         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

dmesg-Output

$ dmesg -l err
[   27.328318] ata5.00: failed to enable AA (error_mask=0x4)
[  113.628484] ata5.00: exception Emask 0x0 SAct 0x40 SErr 0xc00000 action 0x6 frozen
[  113.628569] ata5: SError: { Handshk LinkSeq }
[  113.628615] ata5.00: failed command: READ FPDMA QUEUED
[  113.628671] ata5.00: cmd 60/08:30:98:a3:50/00:00:5d:01:00/40 tag 6 ncq dma 4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  113.628823] ata5.00: status: { DRDY }
[  173.020486] ata5.00: exception Emask 0x0 SAct 0x1f4007 SErr 0xc00000 action 0x6 frozen
[  173.020490] ata5: SError: { Handshk LinkSeq }
[  173.020492] ata5.00: failed command: READ FPDMA QUEUED
[  173.020494] ata5.00: cmd 60/00:00:00:00:00/01:00:00:00:00/40 tag 0 ncq dma 131072 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  173.020496] ata5.00: status: { DRDY }
[  173.020497] ata5.00: failed command: READ FPDMA QUEUED
[  173.020499] ata5.00: cmd 60/00:08:00:08:00/01:00:00:00:00/40 tag 1 ncq dma 131072 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  173.020500] ata5.00: status: { DRDY }
[  173.020501] ata5.00: failed command: READ FPDMA QUEUED
[  173.020504] ata5.00: cmd 60/00:10:00:60:50/01:00:5d:01:00/40 tag 2 ncq dma 131072 in
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  173.020505] ata5.00: status: { DRDY }
[  173.020506] ata5.00: failed command: READ FPDMA QUEUED
[  173.020508] ata5.00: cmd 60/08:70:00:80:50/00:00:5d:01:00/40 tag 14 ncq dma 4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  173.020509] ata5.00: status: { DRDY }
[  173.020510] ata5.00: failed command: READ FPDMA QUEUED
[  173.020512] ata5.00: cmd 60/08:80:10:08:00/00:00:00:00:00/40 tag 16 ncq dma 4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  173.020513] ata5.00: status: { DRDY }
[  173.020514] ata5.00: failed command: READ FPDMA QUEUED
[  173.020516] ata5.00: cmd 60/10:88:28:08:00/00:00:00:00:00/40 tag 17 ncq dma 8192 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  173.020517] ata5.00: status: { DRDY }
[  173.020518] ata5.00: failed command: READ FPDMA QUEUED
[  173.020520] ata5.00: cmd 60/30:90:48:08:00/00:00:00:00:00/40 tag 18 ncq dma 24576 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  173.020521] ata5.00: status: { DRDY }
[  173.020522] ata5.00: failed command: READ FPDMA QUEUED
[  173.020524] ata5.00: cmd 60/78:98:88:08:00/00:00:00:00:00/40 tag 19 ncq dma 61440 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  173.020525] ata5.00: status: { DRDY }
[  173.020526] ata5.00: failed command: READ FPDMA QUEUED
[  173.020528] ata5.00: cmd 60/f8:a0:08:09:00/00:00:00:00:00/40 tag 20 ncq dma 126976 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  173.020529] ata5.00: status: { DRDY }
[  173.499941] blk_update_request: I/O error, dev sda, sector 5860524032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[  173.499958] blk_update_request: I/O error, dev sda, sector 2064 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[  173.499966] blk_update_request: I/O error, dev sda, sector 2088 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[  173.499973] blk_update_request: I/O error, dev sda, sector 2120 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[  173.499980] blk_update_request: I/O error, dev sda, sector 2184 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[  173.499987] blk_update_request: I/O error, dev sda, sector 2312 op 0x0:(READ) flags 0x80700 phys_seg 9 prio class 0
[  203.740482] ata5.00: exception Emask 0x0 SAct 0x8000 SErr 0xc00000 action 0x6 frozen
[  203.740486] ata5: SError: { Handshk LinkSeq }
[  203.740488] ata5.00: failed command: READ FPDMA QUEUED
[  203.740491] ata5.00: cmd 60/08:78:e0:08:00/00:00:00:00:00/40 tag 15 ncq dma 4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  203.740492] ata5.00: status: { DRDY }
[  234.460460] ata5.00: exception Emask 0x0 SAct 0x8 SErr 0xc00000 action 0x6 frozen
[  234.460463] ata5: SError: { Handshk LinkSeq }
[  234.460465] ata5.00: failed command: READ FPDMA QUEUED
[  234.460468] ata5.00: cmd 60/08:18:50:09:00/00:00:00:00:00/40 tag 3 ncq dma 4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  234.460469] ata5.00: status: { DRDY }
[  271.324470] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0xc00000 action 0x6 frozen
[  271.324474] ata5: SError: { Handshk LinkSeq }
[  271.324476] ata5.00: failed command: READ DMA EXT
[  271.324479] ata5.00: cmd 25/00:08:90:28:00/00:00:b8:00:00/e0 tag 21 dma 4096 in
                        res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[  271.324480] ata5.00: status: { DRDY }
[  271.800208] blk_update_request: I/O error, dev sda, sector 3087018128 op 0x0:(READ) flags 0x700 phys_seg 1 prio class 0
[  274.720448] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0xc00000 action 0x6 frozen
[  274.720452] ata5.00: irq_stat 0x08000000, interface fatal error
[  274.720453] ata5: SError: { Handshk LinkSeq }
[  274.720455] ata5.00: failed command: WRITE DMA
[  274.720459] ata5.00: cmd ca/00:10:10:0a:00/00:00:00:00:00/e0 tag 19 dma 8192 out
                        res 50/00:00:1f:5e:50/00:00:5d:01:00/ed Emask 0x10 (ATA bus error)
[  274.720460] ata5.00: status: { DRDY }
[  277.780456] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[  277.780459] ata5.00: irq_stat 0x08000000, interface fatal error
[  277.780460] ata5: SError: { Handshk LinkSeq TrStaTrns }
[  277.780462] ata5.00: failed command: WRITE DMA EXT
[  277.780465] ata5.00: cmd 35/00:10:10:5c:50/00:00:5d:01:00/e0 tag 11 dma 8192 out
                        res 50/00:00:af:a3:50/00:00:5d:01:00/ed Emask 0x10 (ATA bus error)
[  277.780467] ata5.00: status: { DRDY }
[  280.832653] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0xc00000 action 0x6 frozen
[  280.832656] ata5.00: irq_stat 0x08000000, interface fatal error
[  280.832657] ata5: SError: { Handshk LinkSeq }
[  280.832659] ata5.00: failed command: WRITE DMA EXT
[  280.832662] ata5.00: cmd 35/00:10:10:5e:50/00:00:5d:01:00/e0 tag 9 dma 8192 out
                        res 50/00:00:af:a3:50/00:00:5d:01:00/ed Emask 0x10 (ATA bus error)
[  280.832664] ata5.00: status: { DRDY }
[  282.296419] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  282.296422] ata5.00: irq_stat 0x48000001, interface fatal error
[  282.296424] ata5: SError: { Handshk }
[  282.296426] ata5.00: failed command: WRITE DMA EXT
[  282.296429] ata5.00: cmd 35/00:30:48:28:00/00:00:08:01:00/e0 tag 9 dma 24576 out
                        res 51/84:10:68:28:00/00:00:08:01:00/08 Emask 0x10 (ATA bus error)
[  282.296430] ata5.00: status: { DRDY ERR }
[  282.296431] ata5.00: error: { ICRC ABRT }
[  282.779847] blk_update_request: I/O error, dev sda, sector 4429195336 op 0x1:(WRITE) flags 0x700 phys_seg 2 prio class 0
[  282.816456] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  282.816459] ata5.00: irq_stat 0x48000001, interface fatal error
[  282.816461] ata5: SError: { Handshk }
[  282.816463] ata5.00: failed command: WRITE DMA EXT
[  282.816466] ata5.00: cmd 35/00:10:a8:5e:56/00:00:4d:01:00/e0 tag 28 dma 8192 out
                        res 51/84:01:b7:5e:56/00:00:4d:01:00/0d Emask 0x10 (ATA bus error)
[  282.816467] ata5.00: status: { DRDY ERR }
[  282.816469] ata5.00: error: { ICRC ABRT }
[  283.296142] blk_update_request: I/O error, dev sda, sector 5592473256 op 0x1:(WRITE) flags 0x700 phys_seg 1 prio class 0
[  283.736419] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  283.736423] ata5.00: irq_stat 0x48000001, interface fatal error
[  283.736424] ata5: SError: { Handshk }
[  283.736426] ata5.00: failed command: WRITE DMA EXT
[  283.736430] ata5.00: cmd 35/00:08:b0:81:55/00:00:f5:00:00/e0 tag 3 dma 4096 out
                        res 51/84:01:b7:81:55/00:00:f5:00:00/05 Emask 0x10 (ATA bus error)
[  283.736431] ata5.00: status: { DRDY ERR }
[  283.736432] ata5.00: error: { ICRC ABRT }
[  284.212538] blk_update_request: I/O error, dev sda, sector 4116021680 op 0x1:(WRITE) flags 0x700 phys_seg 1 prio class 0
[  284.308477] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  284.308479] ata5.00: irq_stat 0x48000001, interface fatal error
[  284.308481] ata5: SError: { Handshk }
[  284.308483] ata5.00: failed command: WRITE DMA EXT
[  284.308486] ata5.00: cmd 35/00:08:58:4c:00/00:00:b8:00:00/e0 tag 22 dma 4096 out
                        res 51/84:01:5f:4c:00/00:00:b8:00:00/08 Emask 0x10 (ATA bus error)
[  284.308487] ata5.00: status: { DRDY ERR }
[  284.308488] ata5.00: error: { ICRC ABRT }
[  284.784090] blk_update_request: I/O error, dev sda, sector 3087027288 op 0x1:(WRITE) flags 0x700 phys_seg 1 prio class 0
[  284.904429] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  284.904432] ata5.00: irq_stat 0x48000001, interface fatal error
[  284.904434] ata5: SError: { Handshk }
[  284.904436] ata5.00: failed command: WRITE DMA EXT
[  284.904439] ata5.00: cmd 35/00:10:c0:82:55/00:00:f5:00:00/e0 tag 22 dma 8192 out
                        res 51/84:01:cf:82:55/00:00:f5:00:00/05 Emask 0x10 (ATA bus error)
[  284.904441] ata5.00: status: { DRDY ERR }
[  284.904442] ata5.00: error: { ICRC ABRT }
[  285.380056] blk_update_request: I/O error, dev sda, sector 4116021952 op 0x1:(WRITE) flags 0x700 phys_seg 1 prio class 0
[  285.440155] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  285.440157] ata5.00: irq_stat 0x48000001, interface fatal error
[  285.440159] ata5: SError: { Handshk }
[  285.440160] ata5.00: failed command: WRITE DMA EXT
[  285.440163] ata5.00: cmd 35/00:18:28:31:00/00:00:08:01:00/e0 tag 15 dma 12288 out
                        res 51/84:08:38:31:00/00:00:08:01:00/08 Emask 0x10 (ATA bus error)
[  285.440164] ata5.00: status: { DRDY ERR }
[  285.440165] ata5.00: error: { ICRC ABRT }
[  285.915735] blk_update_request: I/O error, dev sda, sector 4429197608 op 0x1:(WRITE) flags 0x700 phys_seg 2 prio class 0
[  286.304440] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  286.304443] ata5.00: irq_stat 0x48000001, interface fatal error
[  286.304445] ata5: SError: { Handshk }
[  286.304447] ata5.00: failed command: WRITE DMA EXT
[  286.304450] ata5.00: cmd 35/00:08:30:85:55/00:00:f5:00:00/e0 tag 11 dma 4096 out
                        res 51/84:01:37:85:55/00:00:f5:00:00/05 Emask 0x10 (ATA bus error)
[  286.304452] ata5.00: status: { DRDY ERR }
[  286.304453] ata5.00: error: { ICRC ABRT }
[  286.784098] blk_update_request: I/O error, dev sda, sector 4116022576 op 0x1:(WRITE) flags 0x700 phys_seg 1 prio class 0
[  286.920449] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  286.920451] ata5.00: irq_stat 0x48000001, interface fatal error
[  286.920453] ata5: SError: { Handshk }
[  286.920455] ata5.00: failed command: WRITE DMA EXT
[  286.920458] ata5.00: cmd 35/00:10:80:87:55/00:00:f5:00:00/e0 tag 2 dma 8192 out
                        res 51/84:01:8f:87:55/00:00:f5:00:00/05 Emask 0x10 (ATA bus error)
[  286.920459] ata5.00: status: { DRDY ERR }
[  286.920460] ata5.00: error: { ICRC ABRT }
[  287.396235] blk_update_request: I/O error, dev sda, sector 4116023168 op 0x1:(WRITE) flags 0x700 phys_seg 1 prio class 0
[  287.552453] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  287.552456] ata5.00: irq_stat 0x48000001, interface fatal error
[  287.552458] ata5: SError: { Handshk }
[  287.552460] ata5.00: failed command: WRITE DMA
[  287.552463] ata5.00: cmd ca/00:e0:20:08:00/00:00:00:00:00/e0 tag 9 dma 114688 out
                        res 51/84:30:d0:08:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
[  287.552465] ata5.00: status: { DRDY ERR }
[  287.552466] ata5.00: error: { ICRC ABRT }
[  288.032030] blk_update_request: I/O error, dev sda, sector 2080 op 0x1:(WRITE) flags 0x700 phys_seg 4 prio class 0
[  298.168374] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  298.168378] ata5.00: irq_stat 0x48000001, interface fatal error
[  298.168380] ata5: SError: { Handshk }
[  298.168383] ata5.00: failed command: WRITE DMA EXT
[  298.168388] ata5.00: cmd 35/00:08:f8:c4:ab/00:00:ea:00:00/e0 tag 31 dma 4096 out
                        res 51/84:01:ff:c4:ab/00:00:ea:00:00/0a Emask 0x10 (ATA bus error)
[  298.168390] ata5.00: status: { DRDY ERR }
[  298.168392] ata5.00: error: { ICRC ABRT }
[  298.648040] blk_update_request: I/O error, dev sda, sector 3937125624 op 0x1:(WRITE) flags 0x700 phys_seg 1 prio class 0
[  298.868430] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  298.868435] ata5.00: irq_stat 0x48000001, interface fatal error
[  298.868438] ata5: SError: { Handshk }
[  298.868440] ata5.00: failed command: WRITE DMA EXT
[  298.868446] ata5.00: cmd 35/00:08:48:88:55/00:00:f5:00:00/e0 tag 21 dma 4096 out
                        res 51/84:01:4f:88:55/00:00:f5:00:00/05 Emask 0x10 (ATA bus error)
[  298.868448] ata5.00: status: { DRDY ERR }
[  298.868449] ata5.00: error: { ICRC ABRT }
[  299.348017] blk_update_request: I/O error, dev sda, sector 4116023368 op 0x1:(WRITE) flags 0x700 phys_seg 1 prio class 0
[  300.796091] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  300.796095] ata5.00: irq_stat 0x48000001, interface fatal error
[  300.796098] ata5: SError: { Handshk }
[  300.796100] ata5.00: failed command: WRITE DMA EXT
[  300.796105] ata5.00: cmd 35/00:88:a8:4c:00/00:00:08:01:00/e0 tag 16 dma 69632 out
                        res 51/84:78:b8:4c:00/00:00:08:01:00/08 Emask 0x10 (ATA bus error)
[  300.796107] ata5.00: status: { DRDY ERR }
[  300.796109] ata5.00: error: { ICRC ABRT }
[  301.274997] blk_update_request: I/O error, dev sda, sector 4429204648 op 0x1:(WRITE) flags 0x700 phys_seg 2 prio class 0
[  305.716106] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  305.716110] ata5.00: irq_stat 0x48000001, interface fatal error
[  305.716113] ata5: SError: { Handshk }
[  305.716115] ata5.00: failed command: WRITE DMA EXT
[  305.716121] ata5.00: cmd 35/00:a8:68:4f:00/00:00:08:01:00/e0 tag 18 dma 86016 out
                        res 51/84:29:e7:4f:00/00:00:08:01:00/08 Emask 0x10 (ATA bus error)
[  305.716123] ata5.00: status: { DRDY ERR }
[  305.716124] ata5.00: error: { ICRC ABRT }
[  306.195295] blk_update_request: I/O error, dev sda, sector 4429205352 op 0x1:(WRITE) flags 0x700 phys_seg 3 prio class 0
[  306.432045] ata5.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  306.432050] ata5.00: irq_stat 0x48000001, interface fatal error
[  306.432053] ata5: SError: { Handshk }
[  306.432055] ata5.00: failed command: WRITE DMA EXT
[  306.432061] ata5.00: cmd 35/00:78:08:d8:aa/00:00:9a:00:00/e0 tag 7 dma 61440 out
                        res 51/84:68:18:d8:aa/00:00:9a:00:00/0a Emask 0x10 (ATA bus error)
[  306.432063] ata5.00: status: { DRDY ERR }
[  306.432064] ata5.00: error: { ICRC ABRT }
[  306.910953] blk_update_request: I/O error, dev sda, sector 2594887688 op 0x1:(WRITE) flags 0x700 phys_seg 4 prio class 0

parted -l

$ sudo parted -l 
Modell: ATA TOSHIBA DT01ACA3 (scsi)
Festplatte  /dev/sda:  3001GB
Sektorgröße (logisch/physisch): 512B/4096B
Partitionstabelle: gpt
Disk-Flags: 

Nummer  Anfang  Ende    Größe   Dateisystem  Name  Flags
 1      1049kB  3001GB  3001GB  zfs          zfs
 9      3001GB  3001GB  8389kB


Modell: ATA LITEONIT LCS-256 (scsi)
Festplatte  /dev/sdb:  256GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: gpt
Disk-Flags: 

Nummer  Anfang  Ende    Größe  Dateisystem  Name                  Flags
 1      1049kB  538MB   537MB  fat32        EFI System Partition  boot, esp
 2      538MB   1305MB  768MB  ext4
 3      1305MB  256GB   255GB


Modell: ATA TOSHIBA DT01ACA3 (scsi)
Festplatte  /dev/sdc:  3001GB
Sektorgröße (logisch/physisch): 512B/4096B
Partitionstabelle: gpt
Disk-Flags: 

Nummer  Anfang  Ende    Größe   Dateisystem  Name  Flags
 1      1049kB  3001GB  3001GB  zfs          zfs
 9      3001GB  3001GB  8389kB


Modell: ATA TOSHIBA DT01ACA3 (scsi)
Festplatte  /dev/sdd:  3001GB
Sektorgröße (logisch/physisch): 512B/4096B
Partitionstabelle: gpt
Disk-Flags: 

Nummer  Anfang  Ende    Größe   Dateisystem  Name  Flags
 1      1049kB  3001GB  3001GB  zfs          zfs
 9      3001GB  3001GB  8389kB


Modell: Linux device-mapper (linear) (dm)
Festplatte  /dev/mapper/ubuntu--vg-root:  254GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: loop
Disk-Flags: 

Nummer  Anfang  Ende   Größe  Dateisystem  Flags
 1      0,00B   254GB  254GB  ext4


Modell: Linux device-mapper (linear) (dm)
Festplatte  /dev/mapper/ubuntu--vg-swap_1:  1023MB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: loop
Disk-Flags: 

Nummer  Anfang  Ende    Größe   Dateisystem     Flags
 1      0,00B   1023MB  1023MB  linux-swap(v1)


Fehler: /dev/mapper/sde3_crypt: unbekannte Partitionstabelle
Modell: Linux device-mapper (crypt) (dm)                                  
Festplatte  /dev/mapper/sde3_crypt:  255GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: unknown
Disk-Flags: 

Ich freue mich über eure Hilfe!

UbuntuRobbi

(Themenstarter)

Anmeldungsdatum:
1. August 2022

Beiträge: 3

Okay. Jetzt wird es seltsam. sda ist laut Test in Ordnung:

$ sudo smartctl -a /dev/sda
[...]
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     32505         -

Dafür wirft nun eine andere Festplatte Fehler:

$ sudo zpool status tank
  pool: tank
 state: DEGRADED
status: One or more devices are faulted in response to persistent errors.
	Sufficient replicas exist for the pool to continue functioning in a
	degraded state.
action: Replace the faulted device, or use 'zpool clear' to mark the device
	repaired.
  scan: scrub repaired 0B in 0 days 05:37:58 with 0 errors on Sun Jul 10 06:02:00 2022
config:

	NAME                                  STATE     READ WRITE CKSUM
	tank                                  DEGRADED     0     0     0
	  raidz1-0                            DEGRADED     0     9     0
	    ata-TOSHIBA_DT01ACA300_16FTPZ3GS  ONLINE       0    20     0
	    ata-TOSHIBA_DT01ACA300_16FTPZKGS  FAULTED      0    82     0  too many errors
	    ata-TOSHIBA_DT01ACA300_16FTRPKGS  ONLINE       0     0     0

errors: No known data errors

Hat jemand Ratschläge?

UbuntuRobbi

(Themenstarter)

Anmeldungsdatum:
1. August 2022

Beiträge: 3

Ein Neustart und die Überprüfung der Steckverbindungen führte zu folgendem Eregbnis:

$ sudo zpool status tank
  pool: tank
 state: ONLINE
status: One or more devices has experienced an unrecoverable error.  An
	attempt was made to correct the error.  Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
	using 'zpool clear' or replace the device with 'zpool replace'.
   see: http://zfsonlinux.org/msg/ZFS-8000-9P
  scan: resilvered 9,55M in 0 days 00:00:11 with 0 errors on Tue Aug  2 08:50:53 2022
config:

	NAME                                  STATE     READ WRITE CKSUM
	tank                                  ONLINE       0     0     0
	  raidz1-0                            ONLINE       0     0     0
	    ata-TOSHIBA_DT01ACA300_16FTPZ3GS  ONLINE       0     0     0
	    ata-TOSHIBA_DT01ACA300_16FTPZKGS  ONLINE       0     0     4
	    ata-TOSHIBA_DT01ACA300_16FTRPKGS  ONLINE       0     0     0

errors: No known data errors

Soll ich jetzt weiter beobachten? Alles in Ordnung?

frostschutz

Avatar von frostschutz

Anmeldungsdatum:
18. November 2010

Beiträge: 7777

Der SMART Test ist durchgelaufen, das ist schon mal gut - aber die Platte hat ja aktuelle Fehlermeldungen im Log (ICRC, ABRT).

Also irgendein Problem war da, kann auch der Controller oder das Kabel sein, dein UDMA CRC Error Count ist auch größer 0. Wenn das weiter ansteigt mal Kabel tauschen.

Antworten |