taker1988
Anmeldungsdatum: 19. Februar 2019
Beiträge: 81
Wohnort: Deutschland
|
hallo, habe auf meinem htpc mehrere festplatten hängen, die per smb freigegeben sind, damit ich mit meinen kodi-clienten drauf zugreifen kann. ich mache alle paar wochen mal ein update am htpc mit apt-get update und apt-get upgrade. lief alles immer gut. nun habe ich eine zeitlang keine updates mehr gemacht und musste plötzlich feststellen, dass plötzlich eine festplatte keinen inhalt mehr anzeigt. diese ist im ntfs format formatiert. ich habe nun die festplatte testweise an einem laptop mit ubuntu (selbe version) und an einem windows 10 pc gehängt. bei beiden OS das selbe verhalten. die festplatte scheint belegt zu sein, aber es werden keine dateien angezeigt. und in kodi sind auch diese dateien, die in der bibliothek waren auch weg. kann mir jemand vllt. erklären, was hier passiert ist, bzw. ob die daten nun weg sind und ob ich diese auch noch retten kann? vielen dank mfg taker-
Moderiert von sebix: Thema in den am ehesten passenden Forenbereich verschoben.
Bearbeitet von Taomon: modtag repariert.
- Bilder
|
Cranvil
Anmeldungsdatum: 9. März 2019
Beiträge: 990
|
Hallo taker1988, hast du in Windows die Anzeige von versteckten und Systemdateien versuchsweise eingeschaltet? Diese Dateien werden von Windows normalerweise nicht angezeigt. Ein weiterer Test wäre die Dateisystemprüfung von Windows auf dem Medium, vielleicht findet sich da ja was wieder. Je nach Möglichkeit bietet es sich ggf. an, vor ein Image der Festplatte zu erzeugen, damit du mehrere Diagnoseanläufe nehmen kannst, ohne mehr kaputt zu machen, als es schon ist. Viele Grüße Cranvil
|
taker1988
(Themenstarter)
Anmeldungsdatum: 19. Februar 2019
Beiträge: 81
Wohnort: Deutschland
|
hi, ja, habe in windows auch die versteckte dateien anzeige an gehabt. auch nichts. ich kann auch daten drauf und runter kopieren, löschen, verschieben usw. geht alles. die windows dateisystemprüfung brachte gar nichts. ☹ da die hdd eh am ubuntu htpc hängt...kann ich da was mit ubuntu versuchen zwecks reperatur, oder sowas? mfg
|
engheneiro
Anmeldungsdatum: 13. August 2009
Beiträge: 2079
Wohnort: Nähe München
|
Hi, wenn die Disk wie oben angegeben NTFS formatiert ist, dann solltest du die weitere Analyse von Windwows aus machen. Wegen der Belegung: evtl. gibt es ausser dem NTFS weitere Partitionen? Das könntets du von Linux aus mit parted oder gparted mal ansehen. Oder sind die Dateien schlicht gelöscht (NTFS Papierkorb?) Gruss Rainer
|
Cranvil
Anmeldungsdatum: 9. März 2019
Beiträge: 990
|
Wenn die Anzeige von versteckten und Systemdateien eingeschaltet ist, sollten sich im Hauptverzeichnis in der Regel die Verzeichnisse Recycler (oder ähnlich) für den Papierkorb und System Volume Information liegen. Ich weiß gerade nicht, ob das bei NTFS-Dateisystemen, die unter Linux erzeugt wurden, auch so ist. Spätestens nach der Benutzung unter Windows sollten die aber auch da sein.
|
taker1988
(Themenstarter)
Anmeldungsdatum: 19. Februar 2019
Beiträge: 81
Wohnort: Deutschland
|
hi, sorry das ich mich so spät melde, war leider geschäftlich unterwegs. also ich habe mich nun dazu entschlossen, die hdd einfach zu formatieren. ich würde sie gerne in ext4 formatieren. mein problem ist, dass ich die hdd in gparted oder so nicht finde. wenn ich nun in die fstab schaue, ist es diese: UUID=61888e28-6c5a-41d5-9589-27f0c3b42053 /media/usbdisk2 xfs auto,nofail,sync,users,rw 0 0 daraus lese ich, dass die hdd ja xfs ist und nicht ntfs? aber egal. auf jedenfall finde ich sie in gparted nicht. habe alle hdds nachgeschaut und die UUID´s verglichen. wie kann ich die hdd denn nun "richtig" mit dem terminal formatieren und was genau muss ich dann in der fstab abändern, dass diese dann wieder automatisch eingehängt wird? mfg
|
engheneiro
Anmeldungsdatum: 13. August 2009
Beiträge: 2079
Wohnort: Nähe München
|
Hallo taker1988 dein Problem hat nichts mit Multimedia zu tun. Bitte einen Moderator, den Thread entsprechend zu verschieben. Dann bekommst du womöglich schneller Antwort. Was da in der fstab steht, muss nicht stimmen. Zeige im Terminal die Ausgabe von sudo blkid Ob die Platte da angezeigt wird. Ist das eine externe (USB) Platte, kann da auch ein Defekt am Kabel oder an der Stromversorgung vorliegen. Das würde ich zunächst mal ausschließen.
Wenn die Platte weiterhin nicht angezeigt wird, kannst du auch nicht formatieren; egal mit welchem Tool. Wie gesagt, ich nehme bevorzugt gparted für den Job. Servus Rainer
|
taker1988
(Themenstarter)
Anmeldungsdatum: 19. Februar 2019
Beiträge: 81
Wohnort: Deutschland
|
hallo, danke für die antwort. ich habe sudo blkid eingegeben. folgendes kam:
/dev/mapper/ubuntu--vg-root: UUID="1d50345c-c1fa-4d4e-9554-4b60ecfdeb64" TYPE="ext4"
/dev/loop0: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: UUID="kLj54D-TSJg-SKb5-Q8zM-SAWP-bgNl-ulnIJm" TYPE="LVM2_member" PARTUUID="871ff9d9-01"
/dev/mapper/ubuntu--vg-swap_1: UUID="fb55b5c2-4f98-4be6-a2a6-8b955de73709" TYPE="swap"
/dev/sdb2: LABEL="Seagate" UUID="F6D86AEBD86AAA17" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="1142caa2-aa4b-4d89-8ee0-162c51ed365d"
/dev/sdc1: UUID="d00ebc82-61db-4644-8eb4-ad9513a3ac26" TYPE="ext4" PARTLABEL="usbhdd" PARTUUID="bcf034a0-78ab-474f-a769-6e280eb29f16"
/dev/sdd1: LABEL="Serien, Filme" UUID="022E45AF2E459D13" TYPE="ntfs" PARTLABEL="Elements" PARTUUID="543b599c-4f11-4228-8f19-a7c69f79745e"
/dev/sdf1: LABEL="Serien" UUID="A4EAB388EAB35570" TYPE="ntfs" PARTUUID="2573d651-01"
/dev/sde2: LABEL="Filme_Musik_Musikfilme_Serien_So" UUID="368CA5A88CA562DB" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="e66ad8d9-edc0-41ce-91a7-7d8cdf07e0bc"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"
/dev/loop12: TYPE="squashfs"
/dev/loop13: TYPE="squashfs"
/dev/loop14: TYPE="squashfs"
/dev/loop15: TYPE="squashfs"
/dev/loop16: TYPE="squashfs"
/dev/loop17: TYPE="squashfs"
/dev/loop18: TYPE="squashfs"
/dev/loop19: TYPE="squashfs"
/dev/loop20: TYPE="squashfs"
/dev/loop21: TYPE="squashfs"
/dev/loop23: TYPE="squashfs"
/dev/loop24: TYPE="squashfs"
/dev/loop26: TYPE="squashfs"
/dev/loop27: TYPE="squashfs"
/dev/loop28: TYPE="squashfs"
/dev/loop29: TYPE="squashfs"
/dev/loop30: TYPE="squashfs"
/dev/loop31: TYPE="squashfs"
/dev/loop33: TYPE="squashfs"
/dev/loop34: TYPE="squashfs"
/dev/loop35: TYPE="squashfs"
/dev/loop36: TYPE="squashfs"
/dev/loop37: TYPE="squashfs"
/dev/sdb1: PARTLABEL="Microsoft reserved partition" PARTUUID="1c049e61-a6d8-4d73-bee1-57fbcace0ba6"
/dev/sde1: PARTLABEL="Microsoft reserved partition" PARTUUID="ebc9076e-8b53-4607-83b0-36b2444b5447"
ich finde die hdd da nicht. ich muss allerdings dazu sagen, dass ich sie an meinem windows pc als netzlaufwerk eingebunden habe und auch drauf komme. also kann doch kein kabel defekt sein, oder liege ich da falsch? außerdem kann ich auch durchaus noch daten drauf und runter kopieren/verschieben und löschen. mfg
|
synthefreak
Anmeldungsdatum: 6. März 2019
Beiträge: 36
|
Ein Schuss in's blaue: Hast Du schon mal versucht, wenn die Platte in Windows eingebunden ist, in windows'schen Papierkorb zu leeren? Wenn Du Alle Partitionen von der HDD vernichten willst, und nicht's mehr hilft:
Boote gparted Live-System, und lösch die ganzen Partitionstabelle (b.z.w. ähnlicher Menupunk).
Hatte mal eine Platte, die konnte ich mit keinen OS löschen und gparted brachte Abhilfe...
https://gparted.org/livecd.php
|
engheneiro
Anmeldungsdatum: 13. August 2009
Beiträge: 2079
Wohnort: Nähe München
|
ich finde die hdd da nicht. ich muss allerdings dazu sagen, dass ich sie an meinem windows pc als netzlaufwerk eingebunden habe und auch drauf komme.
Aha. Das was du da in Windows siehst ist eine Samba-Freigabe (Netzwerklaufwerk). Das muss also gar keine physische Disk sein. Also ist wahrscheinlich nur etwas mit der Berechtigung auf diese Freigabe passiert. Ich würde jetzt nicht wild anfangen, irgendwelche Disks zu formatieren, es sei denn, du brauchst die Daten wirklich nicht mehr. Am Server solltest du über den Dateimanager oder per Terminal die Daten finden können. Verschaffe dir einen Überblick, welche Freigaben auf welchen physischen Disks liegen und prüfe dann die Berechtigung im Filesystem (Mountpunkte) und die Definition der Freigabe im SAMBA.
|
taker1988
(Themenstarter)
Anmeldungsdatum: 19. Februar 2019
Beiträge: 81
Wohnort: Deutschland
|
@synthfreak ja, auch wenn ich versteckte dateien anzeigen lasse, seh ich auf der platte gar nix. (in windows) aber es ist ja auch nur eine eingebundene netzwerkfreigabe.
kann ich mit dem gparted live auch "übers netzwerk" dann die platte anzeigen lassen und dann formatieren? @engheneiro ok, dann warte ich erstmal mit dem formatieren. kannst du mir sagen, wie genau ich das mache? mein server betreibe ich headless, habe aber zugriff über X2Go.
|
engheneiro
Anmeldungsdatum: 13. August 2009
Beiträge: 2079
Wohnort: Nähe München
|
Ich bin kein Supporter. Eigentlich musst du ja das System selbst mal eingerichtet haben und dann die Freigaben definiert haben. Die Angabe, dass es sich um eine Netzwerkfreigabe handelt, die nicht "sichtbar" ist, haben wir uns jetzt langwierig erarbeitet. Diese Info wäre von Anfang an wichtig gewesen. Wenn du Zugriff auf den Server hast, dann schau dort, ob du die Dateien findest. Die Freigaben siehst du bei Samba in der /etc/samba/smb.conf (da sollte stehen, wo die Dateien im Filesystem liegen). Die Freigaben als solche checkst du mit dem smbclient (Beispiel am Server): smbclient -L //localhost Wenn das ein Samba-Problem wird, gibts dafür auch eine eigene Rubrik im Forum 😉 PS: eine Netzwerkfreigabe sieht man natürlich nicht am Client mit gparted oder blkid. Das geht nur am Server, wo die Disks physisch angeschlossen ist. Formatieren und Partitionieren geht natürlich auch nur von da aus.
|
taker1988
(Themenstarter)
Anmeldungsdatum: 19. Februar 2019
Beiträge: 81
Wohnort: Deutschland
|
ja klar, habe es selber eingerichtet. bin aber etlichen tutorials gefolgt usw., da ich mit linux noch nicht soooo viel am hut hatte. hab da eben halt noch nicht so den druchblick 😉 wenn ich nun hier in die smb.conf schaue... #
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS
# Server
# wins support = no
# usershare owner only
usershare owner only=false
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = yes
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin
[Ubuntu]
path = /media/
public = yes
writeable = yes
guest ok = yes
[share]
comment = mein share
force group = sascha
force user = sascha
inherit acls = Yes
path = /media/
read only = No
create mode = 0700
force create mode = 0700
create mask = 0700
directory mask = 0700
meinst du dann diesen abschnitt? [Ubuntu]
path = /media/
public = yes
writeable = yes
guest ok = yes
[share]
comment = mein share
force group = sascha
force user = sascha
inherit acls = Yes
path = /media/
read only = No
create mode = 0700
force create mode = 0700
create mask = 0700
directory mask = 0700 außerdem zeigt mir smbclient -L //localhost das an: WARNING: The "syslog" option is deprecated
Enter WORKGROUP\sascha's password:
Sharename Type Comment
--------- ---- -------
print$ Disk Printer Drivers
Ubuntu Disk
share Disk mein share
IPC$ IPC IPC Service (sascha-htpc-ubuntu server (Samba, Ubuntu))
usbdisk2 Disk
Musik-Filme Disk
Serien Disk
Seagate Disk
usbhdd Disk
Serien_Filme Disk
Reconnecting with SMB1 for workgroup listing.
Server Comment
--------- -------
Workgroup Master
--------- -------
WORKGROUP FRITZ-NAS
aber was genau soll ich nun machen? sorry für die vllt. blöde frage. steh aber momentan aufm schlauch 😮 //edit: habe mit winscp mal in /media/ geschaut. dort sehe ich alle gemounteten platten. eben auch die "usbdisk2". wenn ich da reinschaue, ists auch leer.
|
engheneiro
Anmeldungsdatum: 13. August 2009
Beiträge: 2079
Wohnort: Nähe München
|
Ich bin auch kein Samba-Spezialist aber die beiden Freigaben in der smb.conf zeigen auf das gleiche Verzeichnis /media/ das ist schon mal komisch. Die anderen Freigaben sind offenbar als usershares definiert worden. Also in /var/lib/samba/usershares schauen, was da steht. Fehlt in der Auflistung der shares etwas oder wo ist die Freigabe mit den fehlenden Daten?
|
taker1988
(Themenstarter)
Anmeldungsdatum: 19. Februar 2019
Beiträge: 81
Wohnort: Deutschland
|
soweit ich sehe fehlt nix. habe nun auch in /var/lib/samba/usershares geschaut. dort sind alle freigaben als "dateien" sichtbar. laut winscp jedenfalls. ich sag ja, ich komme ja auch auf die hdd drauf. egal ob ich mit x2go drauf gehe, oder über ne windows freigabe. blos sehe ich auf der hdd halt keine daten, obwohl windows UND linux mir sagt, dass was belegt sei.
|