Mein alter Imac hat sich über ein aktuelles Os gefreut. Nur das Problem, dass nach dem Aufwachen aus dem Bereitschaftsmodus der Bildschirm milchig weiß ist. Wie übersteuert oder zu starke Hintergrundbeleuchtung oder ähnliches. Erst nach einem Neustart behebt sich das Problem. Irgend wo in einem Forum etwas von Parameter - "vendor" sei ein zu tragen , aber ich weiß weder wo noch ob dieser Eintrag für meine Graka und 24.04 gilt. Bitte um Hilfe. Der imac hat eine Radeon eingebaut die der Kernel auch lädt. die Basis Installation ist Xubuntu hatte schon bei 20.04 den selben Effekt. Nun habe ich einen upgrade durchgeführt und ebenso gnome als neuen Desktop hinzugefügt und als Standard geneommen. Diese Änderungen aber bitte nicht als Gründe anführen . beide Installationen liefen reibungslos und fehlerfrei. Das Bereitschaftsproblem und wakeup sehe ich im kernel oder in grub. Kann man linux auch ohne grub nutzen? wäre maö ein versuch. Ich nutze kein Dualboot , daher brauche ich eigentlich auch keine bootmanager.
Desktop nach wakeup milchig weiß - bereitschaft nicht nutzbar
|
Anmeldungsdatum: Beiträge: 10 |
|
|
Supporter, Wikiteam
Anmeldungsdatum: Beiträge: 10363 |
|
|
Anmeldungsdatum: Beiträge: 2177 Wohnort: dahoam |
Da Du vermutlich Deinen Imac auch schon mit MacOS betrieben haben dürftest: Gab es eine Situation, in der der Bildschirm beim Starten aus der Bereitschaft auch so milchig weiß übersteuert wurde? Wenn Du schon irgendwas zwischen Grup und Kernel erwähnst, könnte ich mir vorstellen, dass dieser Effekt durch das systemeigene UEFI (?) oder so gesteuert wird und eine bestimmte Aussage hat. Hast Du irgendwelche Grub-Ausgaben oder frühe Kernel-Logs, die damit einhergehen? Leider hab ich keinen Imac (dafür eine andere lustige Kiste), d.h. ich habe sowas noch nie gesehen. |
|
Anmeldungsdatum: Beiträge: 3140 |
Diese Angaben sind etwas dürftig Bitte veröfffentliche deine Hardware mit inxi im Codeblock. https://wiki.ubuntuusers.de/inxi/ Da es dich um einen iMac handelt, gehe ich mal einfach von Inkompatibilität aus. ☹ Du kannst mal in den Logs nach ACPI Errors schauen. |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 10 |
lspci -nnk | grep -A3 "\[03..\]:" 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV630/M76 [Mobility Radeon HD 2600 XT/2700] [1002:9583] Subsystem: Apple Inc. iMac 7,1 [106b:0083] Kernel driver in use: radeon Kernel modules: radeon, amdgpu martin@martin-iMac:~$ xrandr --prop Screen 0: minimum 16 x 16, current 1680 x 1050, maximum 32767 x 32767 LVDS-1 connected primary 1680x1050+0+0 (normal left inverted right x axis y axis) 430mm x 270mm RANDR Emulation: 1 non-desktop: 0 supported: 0, 1 1680x1050 59.85*+ 1400x1050 59.86 1280x1024 59.81 1280x960 59.79 1152x864 59.78 1024x768 59.68 800x600 59.47 640x480 59.38 320x240 59.52 1440x900 59.75 1280x800 59.81 1152x720 59.75 960x600 59.63 928x580 59.53 800x500 59.50 768x480 59.38 720x480 59.71 640x400 59.20 320x200 58.96 1600x900 59.82 1368x768 59.71 1280x720 59.65 1024x576 59.58 864x486 59.45 720x400 59.55 640x350 58.91 xorg.log: [ 19.723] X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 [ 19.723] Current Operating System: Linux martin-iMac 6.8.0-31-generic #31-Ubuntu SMP PREEMPT_DYNAMIC Sat Apr 20 00:40:06 UTC 2024 x86_64 [ 19.723] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-31-generic root=UUID=0e5b6eba-7344-412d-8573-7afd31fa9e95 ro quiet splash vt.handoff=7 [ 19.723] xorg-server 2:21.1.12-1ubuntu1 (For technical support please see http://www.ubuntu.com/support) [ 19.723] Current version of pixman: 0.42.2 [ 19.723] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 19.723] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 19.723] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 7 19:26:33 2024 [ 19.736] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 19.746] (==) No Layout section. Using the first Screen section. [ 19.746] (==) No screen section available. Using defaults. [ 19.746] (**) |-->Screen "Default Screen Section" (0) [ 19.746] (**) | |-->Monitor "<default monitor>" [ 19.748] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 19.748] (**) Allowing byte-swapped clients [ 19.748] (==) Automatically adding devices [ 19.748] (==) Automatically enabling devices [ 19.748] (==) Automatically adding GPU devices [ 19.748] (==) Automatically binding GPU devices [ 19.748] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 19.758] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 19.758] Entry deleted from font path. [ 19.765] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 19.765] Entry deleted from font path. [ 19.767] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 19.767] Entry deleted from font path. [ 19.767] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 19.767] (==) ModulePath set to "/usr/lib/xorg/modules" [ 19.767] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 19.767] (II) Loader magic: 0x58a440c0f020 [ 19.767] (II) Module ABI versions: [ 19.767] X.Org ANSI C Emulation: 0.4 [ 19.767] X.Org Video Driver: 25.2 [ 19.767] X.Org XInput driver : 24.4 [ 19.767] X.Org Server Extension : 10.0 [ 19.768] (++) using VT number 7 [ 19.768] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 19.770] (II) xfree86: Adding drm device (/dev/dri/card0) [ 19.770] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 [ 19.775] (--) PCI:*(1@0:0:0) 1002:9583:106b:0083 rev 0, Mem @ 0xc0000000/268435456, 0xd0620000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072 [ 19.776] (II) LoadModule: "glx" [ 19.776] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 19.822] (II) Module glx: vendor="X.Org Foundation" [ 19.822] compiled for 1.21.1.11, module version = 1.0.0 [ 19.822] ABI class: X.Org Server Extension, version 10.0 [ 19.822] (II) Applying OutputClass "Radeon" to /dev/dri/card0 [ 19.822] loading driver: radeon [ 19.822] (==) Matched radeon as autoconfigured driver 0 [ 19.822] (==) Matched ati as autoconfigured driver 1 [ 19.822] (==) Matched modesetting as autoconfigured driver 2 [ 19.822] (==) Matched fbdev as autoconfigured driver 3 [ 19.822] (==) Matched vesa as autoconfigured driver 4 [ 19.822] (==) Assigned the driver to the xf86ConfigLayout [ 19.822] (II) LoadModule: "radeon" [ 19.822] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 19.843] (II) Module radeon: vendor="X.Org Foundation" [ 19.843] compiled for 1.21.1.11, module version = 22.0.0 [ 19.843] Module class: X.Org Video Driver [ 19.843] ABI class: X.Org Video Driver, version 25.2 [ 19.843] (II) LoadModule: "ati" [ 19.843] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 19.845] (II) Module ati: vendor="X.Org Foundation" [ 19.845] compiled for 1.21.1.11, module version = 22.0.0 [ 19.845] Module class: X.Org Video Driver [ 19.845] ABI class: X.Org Video Driver, version 25.2 [ 19.846] (II) LoadModule: "modesetting" [ 19.846] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 19.847] (II) Module modesetting: vendor="X.Org Foundation" [ 19.847] compiled for 1.21.1.11, module version = 1.21.1 [ 19.847] Module class: X.Org Video Driver [ 19.847] ABI class: X.Org Video Driver, version 25.2 [ 19.847] (II) LoadModule: "fbdev" [ 19.848] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 19.848] (II) Module fbdev: vendor="X.Org Foundation" [ 19.848] compiled for 1.21.1.11, module version = 0.5.0 [ 19.848] Module class: X.Org Video Driver [ 19.848] ABI class: X.Org Video Driver, version 25.2 [ 19.848] (II) LoadModule: "vesa" [ 19.848] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 19.849] (II) Module vesa: vendor="X.Org Foundation" [ 19.849] compiled for 1.21.1.7, module version = 2.6.0 [ 19.849] Module class: X.Org Video Driver [ 19.849] ABI class: X.Org Video Driver, version 25.2 [ 19.849] (II) RADEON: Driver for ATI/AMD Radeon chipsets: ATI Radeon Mobility X600 (M24), ATI FireMV 2400, ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL, ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380), ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4), ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE, ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE, ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360, ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW, ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2), ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000, ATI Radeon X800 (R420), ATI Radeon X800PRO (R420), ATI Radeon X800SE (R420), ATI FireGL X3 (R420), ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420), ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420), ATI Radeon X850 (R480), ATI Radeon X850 XT (R480), ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480), ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7, ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6, ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9), ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1, ATI Radeon 9800PRO, ATI Radeon 9800XT, ATI Radeon Mobility 9600/9700 (M10/M11), ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11), ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11), ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100, ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000, ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C), ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423), ATI Radeon X800LE (R423), ATI Radeon X800SE (R423), ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430), ATI Radeon X800 SE (R430), ATI Radeon X800 (R430), ATI FireGL V7100 (R423), ATI FireGL V5100 (R423), ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26), ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26), ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5), ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200, ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200, ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370), ATI Radeon X600 (RV370), ATI Radeon X550 (RV370), ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370), ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28), ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28), ATI Radeon X850, ATI unknown Radeon / FireGL (R480), ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410), ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410), ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410), ATI Radeon X1800, ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800, ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100, ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300, ATI FireGL V3350, ATI Mobility Radeon X1450, ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200, ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400, ATI Mobility FireGL V5250, ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT, ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300, ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor, ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570, ATI FireGL V7400, ATI Radeon 9100 PRO IGP, ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2, ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98, ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670, ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600, ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830, ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740, ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610, ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870, ATI Mobility Radeon HD 3850, ATI Radeon HD3850, ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630, ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP, ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600, ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470, ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700, ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT, ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700, ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2, ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics, AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS, ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370, AMD Firestream 9350, ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series, ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570, ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270, ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS, AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS, ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI, MULLINS, KAVERI, HAWAII [ 19.854] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 19.854] (II) FBDEV: driver for framebuffer: fbdev [ 19.854] (II) VESA: driver for VESA chipsets: vesa [ 19.862] (II) [KMS] Kernel modesetting enabled. [ 19.862] (WW) Falling back to old probe method for modesetting [ 19.862] (WW) Falling back to old probe method for fbdev [ 19.862] (II) Loading sub module "fbdevhw" [ 19.862] (II) LoadModule: "fbdevhw" [ 19.862] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 19.864] (II) Module fbdevhw: vendor="X.Org Foundation" [ 19.864] compiled for 1.21.1.11, module version = 0.0.2 [ 19.864] ABI class: X.Org Video Driver, version 25.2 [ 19.864] (II) RADEON(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 19.864] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 [ 19.864] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 19.864] (==) RADEON(0): Default visual is TrueColor [ 19.864] (==) RADEON(0): RGB weight 888 [ 19.864] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) [ 19.864] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 2600 XT" (ChipID = 0x9583) [ 19.864] (II) Loading sub module "fb" [ 19.864] (II) LoadModule: "fb" [ 19.864] (II) Module "fb" already built-in [ 19.864] (II) Loading sub module "dri2" [ 19.864] (II) LoadModule: "dri2" [ 19.864] (II) Module "dri2" already built-in [ 20.580] (II) Loading sub module "glamoregl" [ 20.580] (II) LoadModule: "glamoregl" [ 20.580] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 20.589] (II) Module glamoregl: vendor="X.Org Foundation" [ 20.589] compiled for 1.21.1.11, module version = 1.0.1 [ 20.589] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.661] (II) RADEON(0): glamor X acceleration enabled on AMD RV630 (DRM 2.50.0 / 6.8.0-31-generic, LLVM 17.0.6) [ 20.661] (II) RADEON(0): glamor detected, initialising EGL layer. [ 20.661] (II) RADEON(0): KMS Color Tiling: enabled [ 20.661] (II) RADEON(0): KMS Color Tiling 2D: enabled [ 20.661] (==) RADEON(0): TearFree property default: auto [ 20.661] (II) RADEON(0): KMS Pageflipping: enabled [ 20.671] (II) RADEON(0): Output DVI-0 has no monitor section [ 20.671] (II) RADEON(0): Output LVDS has no monitor section [ 20.678] (II) RADEON(0): Output DIN has no monitor section [ 20.678] (WW) RADEON(0): 3 ZaphodHeads crtcs unavailable. Some outputs will stay off. [ 20.687] (II) RADEON(0): EDID for output DVI-0 [ 20.687] (II) RADEON(0): EDID for output LVDS [ 20.687] (II) RADEON(0): Manufacturer: APP Model: 9c6a Serial#: 16843009 [ 20.687] (II) RADEON(0): Year: 2006 Week: 0 [ 20.687] (II) RADEON(0): EDID Version: 1.3 [ 20.687] (II) RADEON(0): Digital Display Input [ 20.687] (II) RADEON(0): Max Image Size [cm]: horiz.: 43 vert.: 27 [ 20.687] (II) RADEON(0): Gamma: 2.20 [ 20.687] (II) RADEON(0): No DPMS capabilities specified [ 20.687] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 20.687] (II) RADEON(0): First detailed timing is preferred mode [ 20.687] (II) RADEON(0): redX: 0.636 redY: 0.340 greenX: 0.292 greenY: 0.612 [ 20.687] (II) RADEON(0): blueX: 0.146 blueY: 0.069 whiteX: 0.313 whiteY: 0.328 [ 20.687] (II) RADEON(0): Supported established timings: [ 20.687] (II) RADEON(0): Manufacturer's mask: 10 [ 20.687] (II) RADEON(0): Supported detailed timing: [ 20.687] (II) RADEON(0): clock: 119.0 MHz Image Size: 433 x 270 mm [ 20.687] (II) RADEON(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0 [ 20.687] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0 [ 20.687] (II) RADEON(0): Unknown vendor-specific block 1 [ 20.687] (II) RADEON(0): LM201WE3-TLF1 [ 20.687] (II) RADEON(0): Monitor name: Color LCD [ 20.687] (II) RADEON(0): EDID (in hex): [ 20.687] (II) RADEON(0): 00ffffffffffff0006106a9c01010101 [ 20.687] (II) RADEON(0): 00100103802b1b780acf74a2574a9c25 [ 20.687] (II) RADEON(0): 11505400001001010101010101010101 [ 20.687] (II) RADEON(0): 0101010101017c2e90a0601a1e403020 [ 20.687] (II) RADEON(0): 3600b10e1100001c0000000100061030 [ 20.687] (II) RADEON(0): 11080000000000000a20000000fe004c [ 20.687] (II) RADEON(0): 4d3230315745332d544c4631000000fc [ 20.688] (II) RADEON(0): 00436f6c6f72204c43440a202020002b [ 20.688] (II) RADEON(0): Printing probed modes for output LVDS [ 20.688] (II) RADEON(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync (64.7 kHz eP) [ 20.688] (II) RADEON(0): Modeline "1400x1050"x60.0 121.79 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz) [ 20.688] (II) RADEON(0): Modeline "1280x1024"x59.9 109.10 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz) [ 20.688] (II) RADEON(0): Modeline "1440x900"x60.0 106.68 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (56.0 kHz) [ 20.688] (II) RADEON(0): Modeline "1280x960"x60.0 101.34 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.8 kHz) [ 20.688] (II) RADEON(0): Modeline "1280x854"x60.0 89.34 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.2 kHz) [ 20.688] (II) RADEON(0): Modeline "1280x800"x60.0 83.71 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.8 kHz) [ 20.688] (II) RADEON(0): Modeline "1280x720"x60.0 74.65 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.9 kHz) [ 20.688] (II) RADEON(0): Modeline "1152x768"x59.9 71.95 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.8 kHz) [ 20.688] (II) RADEON(0): Modeline "1024x768"x59.9 63.53 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 20.688] (II) RADEON(0): Modeline "800x600"x60.0 38.31 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 20.688] (II) RADEON(0): Modeline "848x480"x59.9 31.65 848 872 952 1056 480 483 493 500 -hsync +vsync (30.0 kHz) [ 20.688] (II) RADEON(0): Modeline "720x480"x59.9 26.85 720 744 808 896 480 483 493 500 -hsync +vsync (30.0 kHz) [ 20.688] (II) RADEON(0): Modeline "640x480"x59.9 23.98 640 664 720 800 480 483 487 500 -hsync +vsync (30.0 kHz) [ 20.701] (II) RADEON(0): EDID for output DIN [ 20.701] (II) RADEON(0): Output DVI-0 disconnected [ 20.701] (II) RADEON(0): Output LVDS connected [ 20.701] (II) RADEON(0): Output DIN disconnected [ 20.701] (II) RADEON(0): Using exact sizes for initial modes [ 20.701] (II) RADEON(0): Output LVDS using initial mode 1680x1050 +0+0 [ 20.701] (II) RADEON(0): mem size init: gart size :1fdee000 vram size: s:10000000 visible:f6c7000 [ 20.701] (==) RADEON(0): DPI set to (96, 96) [ 20.701] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) [ 20.701] (II) Loading sub module "ramdac" [ 20.701] (II) LoadModule: "ramdac" [ 20.701] (II) Module "ramdac" already built-in [ 20.701] (II) UnloadModule: "modesetting" [ 20.701] (II) Unloading modesetting [ 20.701] (II) UnloadModule: "fbdev" [ 20.701] (II) Unloading fbdev [ 20.701] (II) UnloadSubModule: "fbdevhw" [ 20.701] (II) Unloading fbdevhw [ 20.701] (II) UnloadModule: "vesa" [ 20.701] (II) Unloading vesa [ 20.704] (II) RADEON(0): [DRI2] Setup complete [ 20.704] (II) RADEON(0): [DRI2] DRI driver: r600 [ 20.704] (II) RADEON(0): [DRI2] VDPAU driver: r600 [ 20.704] (II) RADEON(0): Front buffer size: 7087K [ 20.704] (II) RADEON(0): VRAM usage limit set to 221022K [ 20.706] (II) RADEON(0): SYNC extension fences enabled [ 20.707] (II) RADEON(0): Present extension enabled [ 20.707] (==) RADEON(0): DRI3 enabled [ 20.707] (==) RADEON(0): Backing store enabled [ 20.707] (II) RADEON(0): Direct rendering enabled [ 20.786] (II) RADEON(0): Use GLAMOR acceleration. [ 20.786] (II) RADEON(0): Acceleration enabled [ 20.787] (==) RADEON(0): DPMS enabled [ 20.787] (==) RADEON(0): Silken mouse enabled [ 20.787] (II) RADEON(0): Set up textured video (glamor) [ 20.787] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video. [ 20.787] (II) RADEON(0): [XvMC] Extension initialized. [ 20.788] (II) Initializing extension Generic Event Extension [ 20.788] (II) Initializing extension SHAPE [ 20.790] (II) Initializing extension MIT-SHM [ 20.790] (II) Initializing extension XInputExtension [ 20.793] (II) Initializing extension XTEST [ 20.797] (II) Initializing extension BIG-REQUESTS [ 20.798] (II) Initializing extension SYNC [ 20.798] (II) Initializing extension XKEYBOARD [ 20.798] (II) Initializing extension XC-MISC [ 20.798] (II) Initializing extension SECURITY [ 20.798] (II) Initializing extension XFIXES [ 20.799] (II) Initializing extension RENDER [ 20.799] (II) Initializing extension RANDR [ 20.799] (II) Initializing extension COMPOSITE [ 20.799] (II) Initializing extension DAMAGE [ 20.800] (II) Initializing extension MIT-SCREEN-SAVER [ 20.800] (II) Initializing extension DOUBLE-BUFFER [ 20.800] (II) Initializing extension RECORD [ 20.800] (II) Initializing extension DPMS [ 20.800] (II) Initializing extension Present [ 20.801] (II) Initializing extension DRI3 [ 20.801] (II) Initializing extension X-Resource [ 20.801] (II) Initializing extension XVideo [ 20.801] (II) Initializing extension XVideo-MotionCompensation [ 20.801] (II) Initializing extension SELinux [ 20.801] (II) SELinux: Disabled on system [ 20.801] (II) Initializing extension GLX [ 20.814] (II) AIGLX: Loaded and initialized r600 [ 20.814] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 20.814] (II) Initializing extension XFree86-VidModeExtension [ 20.815] (II) Initializing extension XFree86-DGA [ 20.815] (II) Initializing extension XFree86-DRI [ 20.815] (II) Initializing extension DRI2 [ 20.816] (II) RADEON(0): Setting screen physical size to 444 x 277 [ 20.988] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 20.988] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 20.988] (II) LoadModule: "libinput" [ 20.990] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 21.014] (II) Module libinput: vendor="X.Org Foundation" [ 21.014] compiled for 1.21.1.11, module version = 1.4.0 [ 21.014] Module class: X.Org XInput Driver [ 21.014] ABI class: X.Org XInput driver, version 24.4 [ 21.014] (II) Using input driver 'libinput' for 'Power Button' [ 21.014] (**) Power Button: always reports core events [ 21.014] (**) Option "Device" "/dev/input/event2" [ 21.025] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 21.025] (II) event2 - Power Button: device is a keyboard [ 21.025] (II) event2 - Power Button: device removed [ 21.031] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 21.031] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 21.031] (**) Option "xkb_model" "pc105" [ 21.031] (**) Option "xkb_layout" "de" [ 21.068] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 21.068] (II) event2 - Power Button: device is a keyboard [ 21.069] (II) config/udev: Adding input device Video Bus (/dev/input/event3) [ 21.069] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 21.069] (II) Using input driver 'libinput' for 'Video Bus' [ 21.069] (**) Video Bus: always reports core events [ 21.069] (**) Option "Device" "/dev/input/event3" [ 21.071] (II) event3 - Video Bus: is tagged by udev as: Keyboard [ 21.071] (II) event3 - Video Bus: device is a keyboard [ 21.071] (II) event3 - Video Bus: device removed [ 21.083] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input3/event3" [ 21.083] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 21.083] (**) Option "xkb_model" "pc105" [ 21.083] (**) Option "xkb_layout" "de" [ 21.085] (II) event3 - Video Bus: is tagged by udev as: Keyboard [ 21.085] (II) event3 - Video Bus: device is a keyboard [ 21.086] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 21.086] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 21.086] (II) Using input driver 'libinput' for 'Power Button' [ 21.086] (**) Power Button: always reports core events [ 21.086] (**) Option "Device" "/dev/input/event0" [ 21.088] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 21.088] (II) event0 - Power Button: device is a keyboard [ 21.088] (II) event0 - Power Button: device removed [ 21.092] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 21.092] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 21.092] (**) Option "xkb_model" "pc105" [ 21.092] (**) Option "xkb_layout" "de" [ 21.093] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 21.093] (II) event0 - Power Button: device is a keyboard [ 21.094] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 21.094] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 21.094] (II) Using input driver 'libinput' for 'Sleep Button' [ 21.094] (**) Sleep Button: always reports core events [ 21.094] (**) Option "Device" "/dev/input/event1" [ 21.096] (II) event1 - Sleep Button: is tagged by udev as: Keyboard [ 21.096] (II) event1 - Sleep Button: device is a keyboard [ 21.096] (II) event1 - Sleep Button: device removed [ 21.100] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1" [ 21.100] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 21.100] (**) Option "xkb_model" "pc105" [ 21.100] (**) Option "xkb_layout" "de" [ 21.101] (II) event1 - Sleep Button: is tagged by udev as: Keyboard [ 21.101] (II) event1 - Sleep Button: device is a keyboard [ 21.104] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/event7) [ 21.104] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Applying InputClass "libinput pointer catchall" [ 21.104] (II) Using input driver 'libinput' for 'Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)' [ 21.104] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): always reports core events [ 21.104] (**) Option "Device" "/dev/input/event7" [ 21.159] (II) event7 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse [ 21.159] (II) event7 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): device is a pointer [ 21.160] (II) event7 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): device removed [ 21.177] (II) libinput: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used. [ 21.177] (II) libinput: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used. [ 21.177] (II) libinput: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used. [ 21.177] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/0003:045E:0039.0004/input/input7/event7" [ 21.177] (II) XINPUT: Adding extended input device "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 10) [ 21.177] (**) Option "AccelerationScheme" "none" [ 21.177] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) selected scheme none/0 [ 21.177] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000 [ 21.177] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4 [ 21.236] (II) event7 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse [ 21.237] (II) event7 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): device is a pointer [ 21.241] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/mouse1) [ 21.241] (II) No input driver specified, ignoring this device. [ 21.241] (II) This device may have been added with another device file. [ 21.244] (II) config/udev: Adding input device Apple Inc. Apple Keyboard (/dev/input/event8) [ 21.244] (**) Apple Inc. Apple Keyboard: Applying InputClass "libinput keyboard catchall" [ 21.244] (II) Using input driver 'libinput' for 'Apple Inc. Apple Keyboard' [ 21.244] (**) Apple Inc. Apple Keyboard: always reports core events [ 21.244] (**) Option "Device" "/dev/input/event8" [ 21.250] (II) event8 - Apple Inc. Apple Keyboard: is tagged by udev as: Keyboard [ 21.250] (II) event8 - Apple Inc. Apple Keyboard: device is a keyboard [ 21.250] (II) event8 - Apple Inc. Apple Keyboard: device removed [ 21.261] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb2/2-4/2-4.2/2-4.2:1.0/0003:05AC:0250.0005/input/input8/event8" [ 21.261] (II) XINPUT: Adding extended input device "Apple Inc. Apple Keyboard" (type: KEYBOARD, id 11) [ 21.261] (**) Option "xkb_model" "pc105" [ 21.261] (**) Option "xkb_layout" "de" [ 21.266] (II) event8 - Apple Inc. Apple Keyboard: is tagged by udev as: Keyboard [ 21.266] (II) event8 - Apple Inc. Apple Keyboard: device is a keyboard [ 21.269] (II) config/udev: Adding input device Apple Inc. Apple Keyboard (/dev/input/event9) [ 21.269] (**) Apple Inc. Apple Keyboard: Applying InputClass "libinput keyboard catchall" [ 21.269] (II) Using input driver 'libinput' for 'Apple Inc. Apple Keyboard' [ 21.269] (**) Apple Inc. Apple Keyboard: always reports core events [ 21.269] (**) Option "Device" "/dev/input/event9" [ 21.274] (II) event9 - Apple Inc. Apple Keyboard: is tagged by udev as: Keyboard [ 21.274] (II) event9 - Apple Inc. Apple Keyboard: device is a keyboard [ 21.275] (II) event9 - Apple Inc. Apple Keyboard: device removed [ 21.300] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb2/2-4/2-4.2/2-4.2:1.1/0003:05AC:0250.0006/input/input9/event9" [ 21.300] (II) XINPUT: Adding extended input device "Apple Inc. Apple Keyboard" (type: KEYBOARD, id 12) [ 21.300] (**) Option "xkb_model" "pc105" [ 21.300] (**) Option "xkb_layout" "de" [ 21.305] (II) event9 - Apple Inc. Apple Keyboard: is tagged by udev as: Keyboard [ 21.305] (II) event9 - Apple Inc. Apple Keyboard: device is a keyboard [ 21.307] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5) [ 21.307] (II) No input driver specified, ignoring this device. [ 21.307] (II) This device may have been added with another device file. [ 21.308] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10) [ 21.308] (II) No input driver specified, ignoring this device. [ 21.308] (II) This device may have been added with another device file. [ 21.310] (II) config/udev: Adding input device Apple Computer, Inc. IR Receiver (/dev/input/event6) [ 21.310] (**) Apple Computer, Inc. IR Receiver: Applying InputClass "libinput keyboard catchall" [ 21.310] (II) Using input driver 'libinput' for 'Apple Computer, Inc. IR Receiver' [ 21.311] (**) Apple Computer, Inc. IR Receiver: always reports core events [ 21.311] (**) Option "Device" "/dev/input/event6" [ 21.315] (II) event6 - Apple Computer, Inc. IR Receiver: is tagged by udev as: Keyboard [ 21.315] (II) event6 - Apple Computer, Inc. IR Receiver: device is a keyboard [ 21.315] (II) event6 - Apple Computer, Inc. IR Receiver: device removed [ 21.343] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/0003:05AC:8242.0003/input/input6/event6" [ 21.343] (II) XINPUT: Adding extended input device "Apple Computer, Inc. IR Receiver" (type: KEYBOARD, id 13) [ 21.343] (**) Option "xkb_model" "pc105" [ 21.343] (**) Option "xkb_layout" "de" [ 21.347] (II) event6 - Apple Computer, Inc. IR Receiver: is tagged by udev as: Keyboard [ 21.347] (II) event6 - Apple Computer, Inc. IR Receiver: device is a keyboard [ 21.350] (II) config/udev: Adding input device Built-in iSight (/dev/input/event4) [ 21.350] (**) Built-in iSight: Applying InputClass "libinput keyboard catchall" [ 21.350] (II) Using input driver 'libinput' for 'Built-in iSight' [ 21.350] (**) Built-in iSight: always reports core events [ 21.350] (**) Option "Device" "/dev/input/event4" [ 21.354] (II) event4 - Built-in iSight: is tagged by udev as: Keyboard [ 21.354] (II) event4 - Built-in iSight: device is a keyboard [ 21.355] (II) event4 - Built-in iSight: device removed [ 21.366] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb3/3-4/3-4:1.0/input/input10/event4" [ 21.366] (II) XINPUT: Adding extended input device "Built-in iSight" (type: KEYBOARD, id 14) [ 21.366] (**) Option "xkb_model" "pc105" [ 21.366] (**) Option "xkb_layout" "de" [ 21.370] (II) event4 - Built-in iSight: is tagged by udev as: Keyboard [ 21.370] (II) event4 - Built-in iSight: device is a keyboard [ 25.070] (II) RADEON(0): EDID vendor "APP", prod id 40042 [ 25.070] (II) RADEON(0): Printing DDC gathered Modelines: [ 25.070] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync (64.7 kHz eP) [ 29.216] (II) RADEON(0): EDID vendor "APP", prod id 40042 [ 29.216] (II) RADEON(0): Printing DDC gathered Modelines: [ 29.216] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync (64.7 kHz eP) [ 302.263] (EE) event7 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): client bug: event processing lagging behind by 98ms, your system is too slow [ 1940.640] (II) event2 - Power Button: device removed [ 1940.649] (II) event3 - Video Bus: device removed [ 1940.672] (II) event0 - Power Button: device removed [ 1940.678] (II) event1 - Sleep Button: device removed [ 1940.693] (II) event7 - Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): device removed [ 1940.702] (II) event8 - Apple Inc. Apple Keyboard: device removed [ 1940.719] (II) event9 - Apple Inc. Apple Keyboard: device removed [ 1940.736] (II) event6 - Apple Computer, Inc. IR Receiver: device removed [ 1940.750] (II) event4 - Built-in iSight: device removed [ 1940.782] (II) UnloadModule: "libinput" [ 1940.783] (II) UnloadModule: "libinput" [ 1940.783] (II) UnloadModule: "libinput" [ 1940.783] (II) UnloadModule: "libinput" [ 1940.783] (II) UnloadModule: "libinput" [ 1940.783] (II) UnloadModule: "libinput" [ 1940.783] (II) UnloadModule: "libinput" [ 1940.783] (II) UnloadModule: "libinput" [ 1940.792] (II) UnloadModule: "libinput" [ 1940.890] (II) Server terminated successfully (0). Closing log file. bugreport script wurde nicht gefunden Bearbeitet von Thomas_Do: Bitte verwende in Zukunft Codeblöcke, um die Übersicht im Forum zu verbessern! |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 10 |
martin@martin-iMac:~$ lspci -nnk | grep -A3 "\[03..\]:" 01:00.0 VGA compatible controller [300]: Advanced Micro Devices, Inc. [AMD/ATI] RV630/M76 [Mobility Radeon HD 2600 XT/2700] [1002:9583] Subsystem: Apple Inc. iMac 7,1 [106b:0083] Kernel driver in use: radeon Kernel modules: radeon, amdgpu martin@martin-iMac:~$ $ inxi CPU: dual core Intel Core2 Duo T7700 (-MCP-) speed/min/max: 968/800/2400 MHz Kernel: 6.8.0-31-generic x86_64 Up: 22m Mem: 2.25/3.82 GiB (58.8%) Storage: 238.47 GiB (65.6% used) Procs: 243 Shell: Bash inxi: 3.3.34 |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 10 |
"die logś" ? kann ich ansehen....wußte gar nicht wozu ich alles im Stande bin..."inkommpatibel" es ist ab und an schon peinlich... einerseits kommen die linuxer voll stolz rüber ...aber wehe es funktioniert was nicht ... dann wird der Arsch zusammen geklemmt... Linux wirbt damit ... alte imacs wieder zum Leben zu erwecken.. nein ich bin Nutzer eines Computers und habe keine Ahnung woran das liegt. Und ich meine mit einer anderen distrtibutioin wäre das problem nicht aufgetreten . hab schon einige durch. |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 10 |
wayland it aktiv ....nicht xorg |
|
Anmeldungsdatum: Beiträge: 3140 |
Der stammt aus dem Jahr 2007. Die Distribution "Ubuntu" richtet sich an Nutzer moderner und potenter Hardware. Dafür ist Ubuntu "berüchtigt"! ☹
Prima, dann ist das ja alles kein Thema! 👍 P.S. Ich wundere mich, daß "Ubuntu" überhaupt rund läuft auf diesem Gerät. (Snap, Wayland, radeon "Legacy" Treiber etc.) |
|
Supporter, Wikiteam
Anmeldungsdatum: Beiträge: 10363 |
martin@martin-iMac:~$ lspci -nnk | grep -A3 "\[03..\]:" 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV630/M76 [Mobility Radeon HD 2600 XT/2700] [1002:9583] Subsystem: Apple Inc. iMac 7,1 [106b:0083] Kernel driver in use: radeon Kernel modules: radeon, amdgpu martin@martin-iMac:~$ martin@martin-iMac:~ $ inxi CPU: dual core Intel Core2 Duo T7700 (-MCP-) speed/min/max: 968/800/2400 MHz Kernel: 6.8.0-31-generic x86_64 Up: 22m Mem: 2.25/3.82 GiB (58.8%) Storage: 238.47 GiB (65.6% used) Procs: 243 Shell: Bash inxi: 3.3.34 martin@martin-iMac:~$ Bearbeitet von Berlin_1946: Forensyntax korrigiert. Bearbeitet von Berlin_1946: Bitte verwende in Zukunft Codeblöcke, um die Übersicht im Forum zu verbessern! |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 10 |
https://www.baeldung.com/linux/kernel-parameters-screen-brightness das habe ich gefunden, muss ich nun testen ob das zum Erfolg führt - denke schon Stichwort Kernelparameter in der grubconfig Bömische Dörfer - ich gehe es an |
Anmeldungsdatum: Beiträge: 4909 |
So, damit niemand auf dumme Ideen kommt, ich sah nämlich gerade ein aus dem Wiki verlinktes Nixiepixel Video, bei dem mit einem GUI-Editor mit root Rechten hantiert wurde. 😳 Ganz schlechte Idee, Nixiepixel! Also zum editieren bitte im Terminal einen Editor verwenden, der keine grafische Umgebung braucht, und somit dann auch nicht die Rechte im User Verzeichnis verbogen werden: sudo nano /etc/default/grub Nano ist einfach zu bedienen, Artikel im Wiki: Nach dem editieren und speichern mit root Rechten (sudo) im Terminal: sudo update-grub && sudo update-initramfs -u -k all Erst wenn das erfolgreich durchgelaufen ist, rebooten. Bootoptionen Artikel im Wiki: |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 10 |
so - hab scheinbar zu viel rumprobiert, nun bleibt er schwarz - startet nicht mehr. Wie kann ich den bootloader reparieren? Was kann ich tun damit linux wieder startet? |
|
Anmeldungsdatum: Beiträge: 3140 |
Du kannst deine Bootoptionen in der Root Shell der Wiederherstellungskonsole permanent oder einmalig ändern. Wenn man experimentiert, ist einmalig immer eine gute Idee! 💡 https://wiki.ubuntuusers.de/Recovery-Modus/ Warum nimmst du nicht einfach eine funktionierende Distribution? Ubuntu -in allen Varianten- ist für dein Gerät ungeeignet wegen des hohen Alters. Debian mit Xfce soll doch schlank sein. |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 10 |
so danke - Rechner bootet wieder. nur - in der etc/default/grub steht etwas anderes drin als ich im bootmenü ändern kann. Demnach gibt es mehrere grub- Dateien? im bootmenü kann ich nur temporär ändern? wo finde ich die korrekte datei - damit ich den falschen parameter permanent entfernen kann? |
