Geilokrieger
Anmeldungsdatum: 26. April 2017
Beiträge: 12
|
Hallo, ich habe seit längerem das der Ton, wenn ich einen Sprachchannel betrete, anfängt zu rauschen. Bislang hat es gereicht pulseaudio mit pulseaudio --kill und pulseaudio --start neu zu starten, aber Discord stürzt dadurch nun ab und nach dem Neustart rauscht es wieder. Wenn ich aber lang genug in einem Sprachchannel bin geht das rauschen wieder weg. Moderiert von ChickenLipsRfun2eat: Thema in einen passenden Forenbereich verschoben. Bitte beachte die als wichtig markierten Themen („Welche Themen gehören hier her und welche nicht?“) in jedem Forenbereich. Danke.
|
RamSpeicher
Anmeldungsdatum: 17. Juli 2009
Beiträge: 2508
|
Servus, auch wenn das jetzt evtl. Komisch klingt aber ich hatte das Problem damals an meinem vorigen PC in Verbindung mit dem Voicechat über Steam. Ich hatte dann mal versuchsweise mein Staubsaugerrohr (halbe Leistung in etwa sollte Reichen) an den betreffenden Klinkenanschluss für mein Headset gehalten (und auch gleich an die USB Ports), und das Rauschen war weg. Deswegen mache ich das auch heute noch bei meinem jetzigen PC. Einen Versuch ist es bei Dir auf jeden Fall Wert,
vorausgesetzt Du hast eine Staubsauger ☺
|
Geilokrieger
(Themenstarter)
Anmeldungsdatum: 26. April 2017
Beiträge: 12
|
Hallo RamSpeicher,
Das scheint das Problem gelöst zu haben, oder das Update das heute kam. Zumindest rauscht es nicht mehr.
Danke 😀
|
RamSpeicher
Anmeldungsdatum: 17. Juli 2009
Beiträge: 2508
|
Ja Cool 👍 kann aber dennoch nicht Schaden besagte Methode mit dem Sauger mal öfters zu machen. So wie die geneigte Hausfrau auch öfter mal die Waschmaschine anschmeißt 😀
|
Geilokrieger
(Themenstarter)
Anmeldungsdatum: 26. April 2017
Beiträge: 12
|
Hallo, ein kurzer Nachtrag, dass Rauschen kam jetzt wieder nur in "/etc/pulse/default.pa" in Zeile 52 nach "oad-module module-udev-detect" "tsched=0" hinzuzufügen. Hab das hier gefunden → https://www.reddit.com/r/discordapp/comments/7si7s3/linux_crackling_sound_in_application/
Hier noch einmal meine komplette Pulseaudio config.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157 | #!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Use hot-plugged devices like Bluetooth or USB automatically (LP: #1702794)
.ifexists module-switch-on-connect.so
load-module module-switch-on-connect
.endif
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect tsched=0 #tsched=0 ist neu
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GSettings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Block audio recording for snap confined packages unless they have
### the "pulseaudio" or "audio-record" interfaces plugged.
.ifexists module-snap-policy.so
load-module module-snap-policy
.endif
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
#
# Alternativ die Source mit eigenem Namen versehen:
# load-module module-echo-cancel source_name=noechosource source_properties=device.description=MySilentSource sink_name=noechosink
set-default-source noechosource
set-default-sink noechosink
|
|