Guten Morgen,
immer wenn ich mein Asus F75A-Notebook aus der Bereitschaft hole (Deckel aufklappen), erscheint das Display in Teilbereichen sehr stark weiß bis grün/lila verpixelt. Manchmal sind es lediglich 2 - 3 cm breite, horizontale Balken (über das Display verteilt), mal ist das gesamte Display "vernebelt".
Auf erstellten Bildschirmfotos ist diese Störung nicht zu sehen, der Bildschirm wird ohne diese Verpixelung aufgenommen, deshalb kann ich hier leider keine anbieten. Diese "Bildstörung" dauert 2 - 4 Minuten und verschwindet selbständig und taucht im weiteren Betrieb zu keiner Zeit mehr auf.
Wäre nett, wenn jemand weiterführende Tipps zur Behebung der geschilderten Störung geben könnte. Änderungen am System wurden nicht vorgenommen.
Meine Systemangaben:
X75A1:~$ lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0106] (rev 09) Subsystem: ASUSTeK Computer Inc. Device [1043:14c7] Kernel driver in use: i915
X75A1:~$ xrandr --prop Screen 0: minimum 8 x 8, current 1600 x 900, maximum 32767 x 32767 LVDS1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 382mm x 215mm EDID: 00ffffffffffff004ca34f3100000000 00150103802615780a859599574f8f26 21505400000001010101010101010101 010101010101202a4036618429303020 26007ed7100000190000000f00000000 000000000032c80a1e00000000fe0053 414d53554e470a2020202020000000fe 003137334b5430322d5030310a2000d3 BACKLIGHT: 4882 range: (0, 4882) Backlight: 4882 range: (0, 4882) scaling mode: Full aspect supported: None, Full, Center, Full aspect 1600x900 60.0*+ 1440x900 59.9 1360x768 59.8 60.0 1152x864 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on VIRTUAL1 disconnected (normal left inverted right x axis y axis)
[ 28.558] X.Org X Server 1.16.0 Release Date: 2014-07-16 [ 28.558] X Protocol Version 11, Revision 0 [ 28.558] Build Operating System: Linux 3.2.0-70-generic x86_64 Ubuntu [ 28.558] Current Operating System: Linux henric-X75A1 3.16.0-49-generic #65~14.04.1-Ubuntu SMP Wed Sep 9 10:03:23 UTC 2015 x86_64 [ 28.558] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-49-generic.efi.signed root=UUID=cb8c39c8-34ca-4780-8f92-2d2752a8d363 ro quiet splash vt.handoff=7 [ 28.558] Build Date: 12 February 2015 11:11:26PM [ 28.558] xorg-server 2:1.16.0-1ubuntu1.2~trusty2 (For technical support please see http://www.ubuntu.com/support) [ 28.558] Current version of pixman: 0.30.2 [ 28.558] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 28.558] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 28.558] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 11 09:37:46 2015 [ 28.687] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 28.687] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 28.688] (==) No Layout section. Using the first Screen section. [ 28.688] (==) No screen section available. Using defaults. [ 28.688] (**) |-->Screen "Default Screen Section" (0) [ 28.688] (**) | |-->Monitor "<default monitor>" [ 28.688] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 28.688] (==) Automatically adding devices [ 28.688] (==) Automatically enabling devices [ 28.688] (==) Automatically adding GPU devices [ 28.688] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 28.688] Entry deleted from font path. [ 28.688] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 28.688] Entry deleted from font path. [ 28.688] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 28.688] Entry deleted from font path. [ 28.688] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 28.688] Entry deleted from font path. [ 28.688] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 28.688] Entry deleted from font path. [ 28.688] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 28.688] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 28.688] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 28.688] (II) Loader magic: 0x7f0e37c77c80 [ 28.688] (II) Module ABI versions: [ 28.688] X.Org ANSI C Emulation: 0.4 [ 28.688] X.Org Video Driver: 18.0 [ 28.688] X.Org XInput driver : 21.0 [ 28.688] X.Org Server Extension : 8.0 [ 28.688] (II) xfree86: Adding drm device (/dev/dri/card0) [ 28.689] (--) PCI:*(0:0:2:0) 8086:0106:1043:14c7 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64 [ 28.689] (II) LoadModule: "glx" [ 28.718] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 29.014] (II) Module glx: vendor="X.Org Foundation" [ 29.014] compiled for 1.16.0, module version = 1.0.0 [ 29.014] ABI class: X.Org Server Extension, version 8.0 [ 29.014] (==) AIGLX enabled [ 29.014] (==) Matched intel as autoconfigured driver 0 [ 29.014] (==) Matched intel as autoconfigured driver 1 [ 29.014] (==) Matched modesetting as autoconfigured driver 2 [ 29.014] (==) Matched fbdev as autoconfigured driver 3 [ 29.014] (==) Matched vesa as autoconfigured driver 4 [ 29.014] (==) Assigned the driver to the xf86ConfigLayout [ 29.014] (II) LoadModule: "intel" [ 29.014] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 29.036] (II) Module intel: vendor="X.Org Foundation" [ 29.036] compiled for 1.16.0, module version = 2.99.914 [ 29.036] Module class: X.Org Video Driver [ 29.036] ABI class: X.Org Video Driver, version 18.0 [ 29.036] (II) LoadModule: "modesetting" [ 29.036] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 29.036] (II) Module modesetting: vendor="X.Org Foundation" [ 29.036] compiled for 1.16.0, module version = 0.9.0 [ 29.036] Module class: X.Org Video Driver [ 29.036] ABI class: X.Org Video Driver, version 18.0 [ 29.036] (II) LoadModule: "fbdev" [ 29.037] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 29.037] (II) Module fbdev: vendor="X.Org Foundation" [ 29.037] compiled for 1.16.0, module version = 0.4.4 [ 29.037] Module class: X.Org Video Driver [ 29.037] ABI class: X.Org Video Driver, version 18.0 [ 29.037] (II) LoadModule: "vesa" [ 29.037] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 29.037] (II) Module vesa: vendor="X.Org Foundation" [ 29.037] compiled for 1.16.0, module version = 2.3.3 [ 29.037] Module class: X.Org Video Driver [ 29.037] ABI class: X.Org Video Driver, version 18.0 [ 29.037] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 29.037] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 29.037] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 29.037] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 29.037] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 29.037] (II) FBDEV: driver for framebuffer: fbdev [ 29.037] (II) VESA: driver for VESA chipsets: vesa [ 29.037] (++) using VT number 7 [ 29.037] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730 [ 29.037] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-utopic 2:2.99.914-1~exp1ubuntu4.5~trusty1 (Timo Aaltonen <tjaalton@debian.org>) [ 29.037] (II) intel(0): SNA compiled for use with valgrind [ 29.037] (WW) Falling back to old probe method for modesetting [ 29.038] (WW) Falling back to old probe method for fbdev [ 29.038] (II) Loading sub module "fbdevhw" [ 29.038] (II) LoadModule: "fbdevhw" [ 29.038] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 29.038] (II) Module fbdevhw: vendor="X.Org Foundation" [ 29.038] compiled for 1.16.0, module version = 0.0.2 [ 29.038] ABI class: X.Org Video Driver, version 18.0 [ 29.038] (WW) Falling back to old probe method for vesa [ 29.038] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2000 [ 29.038] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2 [ 29.038] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 29.038] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 29.038] (==) intel(0): RGB weight 888 [ 29.038] (==) intel(0): Default visual is TrueColor [ 29.038] (II) intel(0): Output LVDS1 has no monitor section [ 29.038] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1 [ 29.038] (II) intel(0): Output VGA1 has no monitor section [ 29.038] (II) intel(0): Output HDMI1 has no monitor section [ 29.038] (II) intel(0): Output DP1 has no monitor section [ 29.038] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 29.039] (II) intel(0): Output VIRTUAL1 has no monitor section [ 29.039] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0 [ 29.039] (==) intel(0): TearFree disabled [ 29.039] (==) intel(0): DPI set to (96, 96) [ 29.039] (II) Loading sub module "dri2" [ 29.039] (II) LoadModule: "dri2" [ 29.039] (II) Module "dri2" already built-in [ 29.039] (II) Loading sub module "present" [ 29.039] (II) LoadModule: "present" [ 29.039] (II) Module "present" already built-in [ 29.039] (II) UnloadModule: "modesetting" [ 29.039] (II) Unloading modesetting [ 29.039] (II) UnloadModule: "fbdev" [ 29.039] (II) Unloading fbdev [ 29.039] (II) UnloadSubModule: "fbdevhw" [ 29.039] (II) Unloading fbdevhw [ 29.039] (II) UnloadModule: "vesa" [ 29.039] (II) Unloading vesa [ 29.039] (==) Depth 24 pixmap format is 32 bpp [ 29.039] (II) intel(0): SNA initialized with Sandybridge (gen6, gt1) backend [ 29.039] (==) intel(0): Backing store enabled [ 29.039] (==) intel(0): Silken mouse enabled [ 29.039] (II) intel(0): HW Cursor enabled [ 29.039] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 29.039] (==) intel(0): DPMS enabled [ 29.039] (II) intel(0): [DRI2] Setup complete [ 29.039] (II) intel(0): [DRI2] DRI driver: i965 [ 29.039] (II) intel(0): [DRI2] VDPAU driver: i965 [ 29.039] (II) intel(0): direct rendering: DRI2 enabled [ 29.039] (II) intel(0): hardware support for Present enabled [ 29.039] (==) intel(0): display hotplug detection enabled [ 29.039] (--) RandR disabled [ 29.091] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 29.091] (II) AIGLX: enabled GLX_ARB_create_context [ 29.091] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 29.091] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 29.091] (II) AIGLX: enabled GLX_INTEL_swap_event [ 29.091] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 29.091] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 29.091] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 29.091] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 29.091] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 29.091] (II) AIGLX: Loaded and initialized i965 [ 29.091] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 29.094] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 29.116] (II) intel(0): Setting screen physical size to 423 x 238 [ 29.123] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 29.125] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 29.125] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 29.125] (II) LoadModule: "evdev" [ 29.125] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 29.150] (II) Module evdev: vendor="X.Org Foundation" [ 29.150] compiled for 1.16.0, module version = 2.9.0 [ 29.150] Module class: X.Org XInput Driver [ 29.150] ABI class: X.Org XInput driver, version 21.0 [ 29.150] (II) Using input driver 'evdev' for 'Power Button' [ 29.150] (**) Power Button: always reports core events [ 29.150] (**) evdev: Power Button: Device: "/dev/input/event2" [ 29.150] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 29.150] (--) evdev: Power Button: Found keys [ 29.150] (II) evdev: Power Button: Configuring as keyboard [ 29.150] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 29.150] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 29.150] (**) Option "xkb_rules" "evdev" [ 29.150] (**) Option "xkb_model" "pc105" [ 29.150] (**) Option "xkb_layout" "de" [ 29.153] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm [ 29.153] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 29.153] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 29.153] (II) Using input driver 'evdev' for 'Video Bus' [ 29.153] (**) Video Bus: always reports core events [ 29.153] (**) evdev: Video Bus: Device: "/dev/input/event4" [ 29.153] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 29.153] (--) evdev: Video Bus: Found keys [ 29.153] (II) evdev: Video Bus: Configuring as keyboard [ 29.153] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event4" [ 29.154] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 29.154] (**) Option "xkb_rules" "evdev" [ 29.154] (**) Option "xkb_model" "pc105" [ 29.154] (**) Option "xkb_layout" "de" [ 29.154] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 29.154] (II) No input driver specified, ignoring this device. [ 29.154] (II) This device may have been added with another device file. [ 29.154] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 29.154] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 29.154] (II) Using input driver 'evdev' for 'Sleep Button' [ 29.154] (**) Sleep Button: always reports core events [ 29.154] (**) evdev: Sleep Button: Device: "/dev/input/event1" [ 29.154] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 29.154] (--) evdev: Sleep Button: Found keys [ 29.154] (II) evdev: Sleep Button: Configuring as keyboard [ 29.154] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1" [ 29.154] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 29.154] (**) Option "xkb_rules" "evdev" [ 29.154] (**) Option "xkb_model" "pc105" [ 29.154] (**) Option "xkb_layout" "de" [ 29.155] (II) config/udev: Adding input device ASUS USB2.0 Webcam (/dev/input/event10) [ 29.155] (**) ASUS USB2.0 Webcam: Applying InputClass "evdev keyboard catchall" [ 29.155] (II) Using input driver 'evdev' for 'ASUS USB2.0 Webcam' [ 29.155] (**) ASUS USB2.0 Webcam: always reports core events [ 29.155] (**) evdev: ASUS USB2.0 Webcam: Device: "/dev/input/event10" [ 29.155] (--) evdev: ASUS USB2.0 Webcam: Vendor 0x1bcf Product 0x2883 [ 29.155] (--) evdev: ASUS USB2.0 Webcam: Found keys [ 29.155] (II) evdev: ASUS USB2.0 Webcam: Configuring as keyboard [ 29.155] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input17/event10" [ 29.155] (II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam" (type: KEYBOARD, id 9) [ 29.155] (**) Option "xkb_rules" "evdev" [ 29.155] (**) Option "xkb_model" "pc105" [ 29.155] (**) Option "xkb_layout" "de" [ 29.155] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8) [ 29.155] (II) No input driver specified, ignoring this device. [ 29.155] (II) This device may have been added with another device file. [ 29.156] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9) [ 29.156] (II) No input driver specified, ignoring this device. [ 29.156] (II) This device may have been added with another device file. [ 29.156] (II) config/udev: Adding input device OM (/dev/input/event6) [ 29.156] (**) OM: Applying InputClass "evdev pointer catchall" [ 29.156] (II) Using input driver 'evdev' for 'OM' [ 29.156] (**) OM: always reports core events [ 29.156] (**) evdev: OM: Device: "/dev/input/event6" [ 29.156] (--) evdev: OM: Vendor 0x4f3 Product 0x235 [ 29.156] (--) evdev: OM: Found 3 mouse buttons [ 29.156] (--) evdev: OM: Found scroll wheel(s) [ 29.156] (--) evdev: OM: Found relative axes [ 29.156] (--) evdev: OM: Found x and y relative axes [ 29.156] (II) evdev: OM: Configuring as mouse [ 29.156] (II) evdev: OM: Adding scrollwheel support [ 29.156] (**) evdev: OM: YAxisMapping: buttons 4 and 5 [ 29.156] (**) evdev: OM: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29.156] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:04F3:0235.0001/input/input13/event6" [ 29.156] (II) XINPUT: Adding extended input device "OM" (type: MOUSE, id 10) [ 29.156] (II) evdev: OM: initialized for relative axes. [ 29.156] (**) OM: (accel) keeping acceleration scheme 1 [ 29.156] (**) OM: (accel) acceleration profile 0 [ 29.156] (**) OM: (accel) acceleration factor: 2.000 [ 29.156] (**) OM: (accel) acceleration threshold: 4 [ 29.157] (II) config/udev: Adding input device OM (/dev/input/mouse1) [ 29.157] (II) No input driver specified, ignoring this device. [ 29.157] (II) This device may have been added with another device file. [ 29.157] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7) [ 29.157] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 29.157] (II) Using input driver 'evdev' for 'Asus WMI hotkeys' [ 29.157] (**) Asus WMI hotkeys: always reports core events [ 29.157] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event7" [ 29.157] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0 [ 29.157] (--) evdev: Asus WMI hotkeys: Found keys [ 29.157] (II) evdev: Asus WMI hotkeys: Configuring as keyboard [ 29.157] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input14/event7" [ 29.157] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11) [ 29.157] (**) Option "xkb_rules" "evdev" [ 29.157] (**) Option "xkb_model" "pc105" [ 29.157] (**) Option "xkb_layout" "de" [ 29.157] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 29.157] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 29.157] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 29.157] (**) AT Translated Set 2 keyboard: always reports core events [ 29.157] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 29.157] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 29.158] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 29.158] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 29.158] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 29.158] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12) [ 29.158] (**) Option "xkb_rules" "evdev" [ 29.158] (**) Option "xkb_model" "pc105" [ 29.158] (**) Option "xkb_layout" "de" [ 29.158] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event5) [ 29.158] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall" [ 29.158] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall" [ 29.158] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons" [ 29.158] (II) LoadModule: "synaptics" [ 29.158] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 29.158] (II) Module synaptics: vendor="X.Org Foundation" [ 29.158] compiled for 1.16.0, module version = 1.8.99 [ 29.158] Module class: X.Org XInput Driver [ 29.158] ABI class: X.Org XInput driver, version 21.0 [ 29.158] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad' [ 29.158] (**) ETPS/2 Elantech Touchpad: always reports core events [ 29.158] (**) Option "Device" "/dev/input/event5" [ 29.168] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property [ 29.168] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3249 (res 33) [ 29.168] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2223 (res 33) [ 29.168] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255 [ 29.168] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15 [ 29.168] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple [ 29.168] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe [ 29.168] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" [ 29.168] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 29.168] (**) ETPS/2 Elantech Touchpad: always reports core events [ 29.188] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event5" [ 29.188] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13) [ 29.188] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5 [ 29.188] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75 [ 29.188] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051 [ 29.188] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1 [ 29.188] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1 [ 29.188] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000 [ 29.188] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4 [ 29.188] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 29.188] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0) [ 29.189] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates" [ 32.437] (II) intel(0): EDID vendor "SEC", prod id 12623 [ 32.437] (II) intel(0): Printing DDC gathered Modelines: [ 32.437] (II) intel(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1910 900 902 908 941 -hsync -vsync (56.5 kHz eP) [ 46.414] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm [ 48.929] (II) XKB: reuse xkmfile /var/lib/xkb/server-81907AB388B478D711E6423DD8B0048239BE0CB6.xkm [ 48.985] (II) XKB: reuse xkmfile /var/lib/xkb/server-81907AB388B478D711E6423DD8B0048239BE0CB6.xkm [ 62.735] (II) XKB: reuse xkmfile /var/lib/xkb/server-A237F4D5ECC0A2998042D3B58D9A7CE5E820BA0E.xkm [ 40401.289] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [152276.506] (II) config/udev: removing device OM [152276.652] (II) evdev: OM: Close [152276.853] (II) UnloadModule: "evdev" [179082.480] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [179083.318] (II) config/udev: Adding input device OM (/dev/input/event6) [179083.318] (**) OM: Applying InputClass "evdev pointer catchall" [179083.318] (II) Using input driver 'evdev' for 'OM' [179083.318] (**) OM: always reports core events [179083.318] (**) evdev: OM: Device: "/dev/input/event6" [179083.318] (--) evdev: OM: Vendor 0x4f3 Product 0x235 [179083.318] (--) evdev: OM: Found 3 mouse buttons [179083.318] (--) evdev: OM: Found scroll wheel(s) [179083.318] (--) evdev: OM: Found relative axes [179083.318] (--) evdev: OM: Found x and y relative axes [179083.318] (II) evdev: OM: Configuring as mouse [179083.318] (II) evdev: OM: Adding scrollwheel support [179083.318] (**) evdev: OM: YAxisMapping: buttons 4 and 5 [179083.318] (**) evdev: OM: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [179083.318] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:04F3:0235.0002/input/input30/event6" [179083.318] (II) XINPUT: Adding extended input device "OM" (type: MOUSE, id 10) [179083.318] (II) evdev: OM: initialized for relative axes. [179083.319] (**) OM: (accel) keeping acceleration scheme 1 [179083.319] (**) OM: (accel) acceleration profile 0 [179083.319] (**) OM: (accel) acceleration factor: 2.000 [179083.319] (**) OM: (accel) acceleration threshold: 4 [179083.325] (II) config/udev: Adding input device OM (/dev/input/mouse1) [179083.326] (II) No input driver specified, ignoring this device. [179083.326] (II) This device may have been added with another device file. [230125.745] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [239779.757] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [266118.879] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
/etc/X11/xorg.conf in meinem System nicht existent.