OK...
manuel@manuel-Aspire-E5-575G:~$ brsaneconfig4 -r manuel@manuel-Aspire-E5-575G:~$ sudo service udev restart [sudo] Passwort für manuel: manuel@manuel-Aspire-E5-575G:~$ /opt/brother/scanner/brscan4/brsaneconfig4 -d ----------------------------- cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sdb5 during installation UUID=d83e40e1-545c-423f-b266-d0c228761d3e / ext4 errors=remount-ro 0 1 # /boot/efi was on /dev/sdb1 during installation UUID=88EF-7A9C /boot/efi vfat umask=0077 0 1 # swap was on /dev/sdb6 during installation UUID=1a458cd6-c305-4f6e-a32c-9478bab12054 none swap sw 0 0 ----------------------------- sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # No USB scanners found. If you expected something different, make sure that # you have loaded a kernel driver for your USB host controller and have setup # the USB system correctly. See man sane-usb for details. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. ----------------------------- ls -R -all /proc/bus/usb ls: Zugriff auf '/proc/bus/usb' nicht möglich: Datei oder Verzeichnis nicht gefunden ----------------------------- cat /proc/bus/usb/devices cat: /proc/bus/usb/devices: Datei oder Verzeichnis nicht gefunden ----------------------------- scanimage -L device `brother4:net1;dev0' is a Brother MFC-J4410DW MFC-J4410DW device `hpaio:/net/Officejet_6500_E710n-z?ip=192.168.178.37' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one ----------------------------- ----------------------------- /etc/opt/brother/scanner/brscan4//brsanenetdevice4.cfg: ----------------------------- /etc/opt/brother/scanner/brscan4//Brsane4.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_17.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_2.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_13.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_8.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_1.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_10.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_16.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_3.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_9.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_14.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_7.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_11.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_19.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_6.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_18.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_15.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_4.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_5.ini: ----------------------------- /etc/opt/brother/scanner/brscan4//models4/ext_12.ini: ----------------------------- ----------------------------- ping test MFC-J4410DW ping 192.168.0.5 -w 10 PING 192.168.0.5 (192.168.0.5) 56(84) bytes of data. 64 bytes from 192.168.0.5: icmp_seq=1 ttl=64 time=0.017 ms 64 bytes from 192.168.0.5: icmp_seq=2 ttl=64 time=0.015 ms 64 bytes from 192.168.0.5: icmp_seq=3 ttl=64 time=0.014 ms 64 bytes from 192.168.0.5: icmp_seq=4 ttl=64 time=0.020 ms 64 bytes from 192.168.0.5: icmp_seq=5 ttl=64 time=0.029 ms 64 bytes from 192.168.0.5: icmp_seq=6 ttl=64 time=0.025 ms 64 bytes from 192.168.0.5: icmp_seq=7 ttl=64 time=0.019 ms 64 bytes from 192.168.0.5: icmp_seq=8 ttl=64 time=0.023 ms 64 bytes from 192.168.0.5: icmp_seq=9 ttl=64 time=0.022 ms 64 bytes from 192.168.0.5: icmp_seq=10 ttl=64 time=0.037 ms --- 192.168.0.5 ping statistics --- 10 packets transmitted, 10 received, 0% packet loss, time 9001ms rtt min/avg/max/mdev = 0.014/0.022/0.037/0.006 ms manuel@manuel-Aspire-E5-575G:~$