Sieht gut aus,eines könntest du noch Installieren
sudo apt install libtool
zeige auch mal
ls -lrth /usr/bin/python*
hp-diagnose_queues -i
hp-doctor
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Sieht gut aus,eines könntest du noch Installieren sudo apt install libtool zeige auch mal ls -lrth /usr/bin/python*
hp-diagnose_queues -i
hp-doctor |
(Themenstarter)
Anmeldungsdatum: Beiträge: 335 |
erup@ch-inspiron3670:~$ hp-diagnose_queues -i Der Befehl 'hp-diagnose_queues' wurde nicht gefunden, kann aber installiert werden mit: sudo apt install hplip-gui erup@ch-inspiron3670:~$ sudo apt install hplip-gui [sudo] Passwort für erup: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Die folgenden zusätzlichen Pakete werden installiert: python3-notify2 Die folgenden NEUEN Pakete werden installiert: hplip-gui python3-notify2 0 aktualisiert, 2 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 30,1 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 200 kB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] j Holen:1 http://archive.ubuntu.com/ubuntu focal/universe amd64 hplip-gui all 3.20.3+dfsg0-2 [19,1 kB] Holen:2 http://archive.ubuntu.com/ubuntu focal/universe amd64 python3-notify2 all 0.3-4 [11,0 kB] Es wurden 30,1 kB in 0 s geholt (170 kB/s). Vormals nicht ausgewähltes Paket hplip-gui wird gewählt. (Lese Datenbank ... 279946 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../hplip-gui_3.20.3+dfsg0-2_all.deb ... Entpacken von hplip-gui (3.20.3+dfsg0-2) ... Vormals nicht ausgewähltes Paket python3-notify2 wird gewählt. Vorbereitung zum Entpacken von .../python3-notify2_0.3-4_all.deb ... Entpacken von python3-notify2 (0.3-4) ... hplip-gui (3.20.3+dfsg0-2) wird eingerichtet ... python3-notify2 (0.3-4) wird eingerichtet ... Trigger für mime-support (3.64ubuntu1) werden verarbeitet ... Trigger für man-db (2.9.1-1) werden verarbeitet ... Trigger für desktop-file-utils (0.24-1ubuntu3) werden verarbeitet ... erup@ch-inspiron3670:~$
erup@ch-inspiron3670:~$ sudo apt install libtool [sudo] Passwort für erup: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Die folgenden zusätzlichen Pakete werden installiert: autoconf automake autotools-dev libltdl-dev libsigsegv2 m4 Vorgeschlagene Pakete: autoconf-archive gnu-standards autoconf-doc gettext libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc Die folgenden NEUEN Pakete werden installiert: autoconf automake autotools-dev libltdl-dev libsigsegv2 libtool m4 0 aktualisiert, 7 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 1.419 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 6.223 kB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] j Holen:1 http://archive.ubuntu.com/ubuntu focal/main amd64 libsigsegv2 amd64 2.12-2 [13,9 kB] Holen:2 http://archive.ubuntu.com/ubuntu focal/main amd64 m4 amd64 1.4.18-4 [199 kB] Holen:3 http://archive.ubuntu.com/ubuntu focal/main amd64 autoconf all 2.69-11.1 [321 kB] Holen:4 http://archive.ubuntu.com/ubuntu focal/main amd64 autotools-dev all 20180224.1 [39,6 kB] Holen:5 http://archive.ubuntu.com/ubuntu focal/main amd64 automake all 1:1.16.1-4ubuntu6 [522 kB] Holen:6 http://archive.ubuntu.com/ubuntu focal/main amd64 libltdl-dev amd64 2.4.6-14 [162 kB] Holen:7 http://archive.ubuntu.com/ubuntu focal/main amd64 libtool all 2.4.6-14 [161 kB] Es wurden 1.419 kB in 1 s geholt (1.242 kB/s). Vormals nicht ausgewähltes Paket libsigsegv2:amd64 wird gewählt. (Lese Datenbank ... 279592 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../0-libsigsegv2_2.12-2_amd64.deb ... Entpacken von libsigsegv2:amd64 (2.12-2) ... Vormals nicht ausgewähltes Paket m4 wird gewählt. Vorbereitung zum Entpacken von .../1-m4_1.4.18-4_amd64.deb ... Entpacken von m4 (1.4.18-4) ... Vormals nicht ausgewähltes Paket autoconf wird gewählt. Vorbereitung zum Entpacken von .../2-autoconf_2.69-11.1_all.deb ... Entpacken von autoconf (2.69-11.1) ... Vormals nicht ausgewähltes Paket autotools-dev wird gewählt. Vorbereitung zum Entpacken von .../3-autotools-dev_20180224.1_all.deb ... Entpacken von autotools-dev (20180224.1) ... Vormals nicht ausgewähltes Paket automake wird gewählt. Vorbereitung zum Entpacken von .../4-automake_1%3a1.16.1-4ubuntu6_all.deb ... Entpacken von automake (1:1.16.1-4ubuntu6) ... Vormals nicht ausgewähltes Paket libltdl-dev:amd64 wird gewählt. Vorbereitung zum Entpacken von .../5-libltdl-dev_2.4.6-14_amd64.deb ... Entpacken von libltdl-dev:amd64 (2.4.6-14) ... Vormals nicht ausgewähltes Paket libtool wird gewählt. Vorbereitung zum Entpacken von .../6-libtool_2.4.6-14_all.deb ... Entpacken von libtool (2.4.6-14) ... autotools-dev (20180224.1) wird eingerichtet ... libsigsegv2:amd64 (2.12-2) wird eingerichtet ... libtool (2.4.6-14) wird eingerichtet ... m4 (1.4.18-4) wird eingerichtet ... autoconf (2.69-11.1) wird eingerichtet ... automake (1:1.16.1-4ubuntu6) wird eingerichtet ... update-alternatives: /usr/bin/automake-1.16 wird verwendet, um /usr/bin/automake (automake) im automatischen Modus bereitzustellen libltdl-dev:amd64 (2.4.6-14) wird eingerichtet ... Trigger für libc-bin (2.31-0ubuntu9.1) werden verarbeitet ... Trigger für man-db (2.9.1-1) werden verarbeitet ... Trigger für install-info (6.7.0.dfsg.2-5) werden verarbeitet ... erup@ch-inspiron3670:~$ erup@ch-inspiron3670:~$ ls -lrth /usr/bin/python* lrwxrwxrwx 1 root root 9 Mär 13 2020 /usr/bin/python3 -> python3.8 -rwxr-xr-x 1 root root 5,3M Jul 28 14:59 /usr/bin/python3.8 erup@ch-inspiron3670:~$ erup@ch-inspiron3670:~$ hp-diagnose_queues -i Der Befehl 'hp-diagnose_queues' wurde nicht gefunden, kann aber installiert werden mit: sudo apt install hplip-gui erup@ch-inspiron3670:~$ erup@ch-inspiron3670:~$ hp-doctor HP Linux Imaging and Printing System (ver. 3.20.3) Self Diagnse Utility and Healing Utility ver. 1.0 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. HP Linux Imaging and Printing System (ver. 3.20.3) Self Diagnse Utility and Healing Utility ver. 1.0 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Checking for Deprecated items.... No Deprecated items are found Checking for HPLIP updates.... error: Failed to locate hp-upgrade utility Checking for Dependencies.... warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 5.4.0-62-generic #70-Ubuntu SMP Tue Jan 12 12:45:47 UTC 2021 GNU/Linux Host: ch-inspiron3670 Proc: 5.4.0-62-generic #70-Ubuntu SMP Tue Jan 12 12:45:47 UTC 2021 GNU/Linux Distribution: ubuntu 20.04 Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.20.3 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.20.3 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip html=/usr/share/doc/hplip-doc icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=no gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=no foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.20.3 restricted-build=no ui-toolkit=qt5 qt3=no qt4=no qt5=yes policy-kit=yes lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=no class-driver=no Current contents of '/var/lib/hp/hplip.state' file: [plugin] installed = 1 eula = 1 version = 3.20.3 Current contents of '~/.hplip/hplip.conf' file: [last_used] device_uri = hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q87SN6CPR1a [installation] date_time = 01/18/21 16:04:31 version = 3.20.3 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> ------------------------- | External Dependencies | ------------------------- error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK - error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed' scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK - error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running' policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK - network network -wget OPTIONAL - 1.20.3 OK - avahi-utils avahi-utils OPTIONAL - 0.7 OK - ------------------------ | General Dependencies | ------------------------ error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed' error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed' error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed' libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK - error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed' sane SANE - Scanning library REQUIRED - - OK - error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed' error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed' error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed' python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.5 OK - error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed' error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed' error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed' python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK - python3-xml Python XML libraries REQUIRED - 2.2.9 OK - error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.5 MISSING 'python3-devel needs to be installed' python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK - python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK - -------------- | COMPILEDEP | -------------- error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed' gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK - --------------------- | Python Extentions | --------------------- cupsext CUPS-Extension REQUIRED - 3.20.3 OK - hpmudext IO-Extension REQUIRED - 3.20.3 OK - ---------------------- | Scan Configuration | ---------------------- '/etc/sane.d/dll.d/hpaio' not found. hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ device `genesys:libusb:001:003' is a Canon LiDE 35/40/50 flatbed scanner device `genesys:libusb:001:003' is a Canon LiDE 35/40/50 flatbed scanner -------------------------- | DISCOVERED USB DEVICES | -------------------------- No devices found. --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- HP-LaserJet-Professional-P1102 ------------------------------ Type: Printer Device URI: hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q87SN6CPR1a PPD: /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd warning: Failed to read /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd ppd file PPD Description: Printer status: Drucker HP-LaserJet-Professional-P1102 ist deaktiviert seit Mo 18 Jan 20Unplugged or turned off Required plug-in status: Installed error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q87SN6CPR1a error: Device not found error: Communication status: Failed -------------- | PERMISSION | -------------- Missing Required Dependencies ----------------------------- error: 'libcups2' package is missing or 'cups' service is not running. error: 'libdbus-1-dev' package is missing/incompatible error: 'libjpeg-dev' package is missing/incompatible error: 'libcups2-dev' package is missing or 'cups' service is not running. error: 'cups-bsd' package is missing or 'cups' service is not running. error: 'cups-client' package is missing or 'cups' service is not running. error: 'libcupsimage2-dev' package is missing or 'cups' service is not running. error: 'libusb-1.0.0-dev' package is missing/incompatible error: 'libusb-0.1-4' package is missing/incompatible error: 'libsane-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible error: 'snmp-mibs-downloader' package is missing/incompatible error: 'openssl' package is missing/incompatible error: 'python3-pyqt4' package is missing/incompatible error: 'gtk2-engines-pixbuf' package is missing/incompatible error: 'python3-dev' package is missing/incompatible error: 'libtool' package is missing/incompatible error: 'libtool-bin' package is missing/incompatible Missing Optional Dependencies ----------------------------- error: 'gtk2-engines-pixbuf' package is missing/incompatible error: 'xsane' package is missing/incompatible error: 'python3-notify2' package is missing/incompatible error: 'python3-dbus.mainloop.qt' package is missing/incompatible ENTER SUDO PASSWORD ------------------- Please enter the sudoer (erup)'s password: Checking Permissions.... Checking for Configured Queues.... warning: Fail to read ppd=/etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd file warning: Insufficient permission to access file /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd warning: Could not complete Queue(s) configuration check Checking for HP Properitery Plugin's.... Plugin's already installed Checking for Printer Status.... error: 'HP-LaserJet-Professional-P1102' Printer is either Powered-OFF or Failed to communicate. Turn On Printer and re-run hp-doctor Diagnose completed... More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html erup@ch-inspiron3670:~$ |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Ok,nun bitte noch ls -lha /etc/cups/ppd/ und sudo cat /etc/cups/printers.conf Danach klemme den HP von USB ab und rufe deine Druckerverwaltung auf system-config-printer und lösche alle Drucker! Stecke dein HP nun wieder in USB Port –- wird er erkannt und Eingerichtet? |
(Themenstarter)
Anmeldungsdatum: Beiträge: 335 |
Der Drucker wurde erkannt und eingerichtet. Ein Testdruck unmittelbar danach schlug leider fehl. Hätte ich da neu booten sollen? Ich hab was vergessen zu schicken: erup@ch-inspiron3670:~$ ls -lha /etc/cups/ppd/ insgesamt 36K drwxr-xr-x 2 root lp 4,0K Jan 18 14:15 . drwxr-xr-x 5 root lp 4,0K Jan 18 15:20 .. -rw-r----- 1 root lp 25K Jan 18 14:15 HP-LaserJet-Professional-P1102.ppd erup@ch-inspiron3670:~$ erup@ch-inspiron3670:~$ sudo cat /etc/cups/printers.conf [sudo] Passwort für erup: # Printer configuration file for CUPS v2.3.1 # Written by cupsd # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING NextPrinterId 12 <DefaultPrinter HP-LaserJet-Professional-P1102> PrinterId 11 UUID urn:uuid:b9738a8c-b05b-39b5-4139-75a5341e6afd Info Hewlett-Packard HP LaserJet Professional P1102 Location ch-inspiron3670 MakeModel HP LaserJet Pro P1102 Foomatic/foo2zjs-z2 (recommended) DeviceURI hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q87SN6CPR1a State Stopped StateMessage Unplugged or turned off StateTime 1610979595 ConfigTime 1610975709 Reason paused Type 8425476 Accepting Yes Shared Yes JobSheets none none QuotaPeriod 0 PageLimit 0 KLimit 0 OpPolicy default ErrorPolicy retry-job </DefaultPrinter> erup@ch-inspiron3670:~$ erup@ch-inspiron3670:~$ system-config-printer /usr/share/system-config-printer/system-config-printer.py:315: DeprecationWarning: Gtk.ActionGroup.list_actions is deprecated for action in printer_manager_action_group.list_actions (): /usr/share/system-config-printer/system-config-printer.py:316: DeprecationWarning: Gtk.Action.set_sensitive is deprecated action.set_sensitive (False) /usr/share/system-config-printer/system-config-printer.py:324: DeprecationWarning: Gtk.ActionGroup.get_action is deprecated act = printer_manager_action_group.get_action (action) /usr/share/system-config-printer/system-config-printer.py:354: DeprecationWarning: Gtk.UIManager.ensure_update is deprecated self.ui_manager.ensure_update () /usr/share/system-config-printer/system-config-printer.py:355: DeprecationWarning: Gtk.UIManager.get_accel_group is deprecated self.PrintersWindow.add_accel_group (self.ui_manager.get_accel_group ()) /usr/share/system-config-printer/system-config-printer.py:364: DeprecationWarning: Gtk.UIManager.get_action is deprecated action = self.ui_manager.get_action ("/new-printer") /usr/share/system-config-printer/system-config-printer.py:365: DeprecationWarning: Gtk.Action.create_menu_item is deprecated newprinteritem = action.create_menu_item () /usr/share/system-config-printer/system-config-printer.py:663: DeprecationWarning: Gtk.Action.get_proxies is deprecated for widget in action.get_proxies (): /usr/share/system-config-printer/system-config-printer.py:976: DeprecationWarning: urllib.parse.splittype() is deprecated as of 3.8, use urllib.parse.urlparse() instead (scheme, rest) = urllib.parse.splittype (object.device_uri) /usr/share/system-config-printer/system-config-printer.py:2236: DeprecationWarning: Gdk.threads_enter is deprecated Gdk.threads_enter () /usr/share/system-config-printer/system-config-printer.py:2187: DeprecationWarning: Gdk.threads_leave is deprecated Gdk.threads_leave () /usr/share/system-config-printer/system-config-printer.py:701: DeprecationWarning: Gtk.Menu.popup_for_device is deprecated self.printer_context_menu.popup_for_device (None, None, None, None, erup@ch-inspiron3670:~$ |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Nein,eigentlich nicht.Zeige nun mal python3 /usr/share/hplip/diagnose_queues.py
python3 /usr/share/hplip/doctor.py
tail -n 150 /var/log/cups/error_log |
(Themenstarter)
Anmeldungsdatum: Beiträge: 335 |
erup@ch-inspiron3670:~$ python3 /usr/share/hplip/diagnose_queues.py HP Linux Imaging and Printing System (ver. 3.20.3) AutoConfig Utility to check queues configuration ver. 1.1 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Icon theme "elementary" not found. warning: Fail to read ppd=/etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd file warning: Insufficient permission to access file /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd warning: Could not complete Queue(s) configuration check erup@ch-inspiron3670:~$ erup@ch-inspiron3670:~$ python3 /usr/share/hplip/doctor.py HP Linux Imaging and Printing System (ver. 3.20.3) Self Diagnse Utility and Healing Utility ver. 1.0 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. HP Linux Imaging and Printing System (ver. 3.20.3) Self Diagnse Utility and Healing Utility ver. 1.0 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Checking for Deprecated items.... No Deprecated items are found Checking for HPLIP updates.... error: Failed to locate hp-upgrade utility Checking for Dependencies.... warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 5.4.0-62-generic #70-Ubuntu SMP Tue Jan 12 12:45:47 UTC 2021 GNU/Linux Host: ch-inspiron3670 Proc: 5.4.0-62-generic #70-Ubuntu SMP Tue Jan 12 12:45:47 UTC 2021 GNU/Linux Distribution: ubuntu 20.04 Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.20.3 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.20.3 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip html=/usr/share/doc/hplip-doc icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=no gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=no foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.20.3 restricted-build=no ui-toolkit=qt5 qt3=no qt4=no qt5=yes policy-kit=yes lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=no class-driver=no Current contents of '/var/lib/hp/hplip.state' file: [plugin] installed = 1 eula = 1 version = 3.20.3 Current contents of '~/.hplip/hplip.conf' file: [last_used] device_uri = hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q87SN6CPR1a [installation] date_time = 01/18/21 16:38:16 version = 3.20.3 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> ------------------------- | External Dependencies | ------------------------- error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK - error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed' scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK - error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running' policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK - network network -wget OPTIONAL - 1.20.3 OK - avahi-utils avahi-utils OPTIONAL - 0.7 OK - ------------------------ | General Dependencies | ------------------------ error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed' error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed' error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed' libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK - error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed' sane SANE - Scanning library REQUIRED - - OK - error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed' error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed' error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed' python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.5 OK - python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK - error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed' error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed' python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK - python3-xml Python XML libraries REQUIRED - 2.2.9 OK - error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.5 MISSING 'python3-devel needs to be installed' python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK - python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK - -------------- | COMPILEDEP | -------------- error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed' gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK - --------------------- | Python Extentions | --------------------- cupsext CUPS-Extension REQUIRED - 3.20.3 OK - hpmudext IO-Extension REQUIRED - 3.20.3 OK - ---------------------- | Scan Configuration | ---------------------- '/etc/sane.d/dll.d/hpaio' not found. hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ device `genesys:libusb:001:003' is a Canon LiDE 35/40/50 flatbed scanner device `genesys:libusb:001:003' is a Canon LiDE 35/40/50 flatbed scanner -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model -------------------------------- ------------------------------ hp:/usb/HP_LaserJet_Professional HP LaserJet Professional P1102 _P1102?serial=000000000Q87SN6CPR 1a --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- HP-LaserJet-Professional-P1102 ------------------------------ Type: Printer Device URI: hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q87SN6CPR1a PPD: /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd warning: Failed to read /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd ppd file PPD Description: Printer status: Drucker HP-LaserJet-Professional-P1102 ist im Leerlauf. Aktiviert seit Mo 18 Jan 2021 16:30:19 CET Required plug-in status: Installed Communication status: Good -------------- | PERMISSION | -------------- USB HP-LaserJet-Professional-P1102 Required - - OK Node:'/dev/bus/usb/001/011' Perm:' root lp rw- rw- rw- rw- r--' Missing Required Dependencies ----------------------------- error: 'libcups2' package is missing or 'cups' service is not running. error: 'libdbus-1-dev' package is missing/incompatible error: 'libjpeg-dev' package is missing/incompatible error: 'libcups2-dev' package is missing or 'cups' service is not running. error: 'cups-bsd' package is missing or 'cups' service is not running. error: 'cups-client' package is missing or 'cups' service is not running. error: 'libcupsimage2-dev' package is missing or 'cups' service is not running. error: 'libusb-1.0.0-dev' package is missing/incompatible error: 'libusb-0.1-4' package is missing/incompatible error: 'libsane-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible error: 'snmp-mibs-downloader' package is missing/incompatible error: 'openssl' package is missing/incompatible error: 'python3-pyqt4' package is missing/incompatible error: 'gtk2-engines-pixbuf' package is missing/incompatible error: 'python3-dev' package is missing/incompatible error: 'libtool' package is missing/incompatible error: 'libtool-bin' package is missing/incompatible Missing Optional Dependencies ----------------------------- error: 'gtk2-engines-pixbuf' package is missing/incompatible error: 'xsane' package is missing/incompatible error: 'python3-dbus.mainloop.qt' package is missing/incompatible ENTER SUDO PASSWORD ------------------- Please enter the sudoer (erup)'s password: Checking Permissions.... Checking for Configured Queues.... warning: Fail to read ppd=/etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd file warning: Insufficient permission to access file /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd warning: Could not complete Queue(s) configuration check Checking for HP Properitery Plugin's.... Plugin's already installed Diagnose completed... More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html erup@ch-inspiron3670:~$ erup@ch-inspiron3670:~$ |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Hmmm,immer noch die Warnung 😐 Zeige mal bitte id
/usr/sbin/cupsfilter -p /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd -m printer/foo -e --list-filters /etc/services |
(Themenstarter)
Anmeldungsdatum: Beiträge: 335 |
erup@ch-inspiron3670:~$ id uid=1000(erup) gid=1001(erup) Gruppen=1001(erup),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),119(lpadmin),1000(sambashare) erup@ch-inspiron3670:~$ erup@ch-inspiron3670:~$ /usr/sbin/cupsfilter -p /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd -m printer/foo -e --list-filters /etc/services cupsfilter: Öffnen der PPD-Datei: PPD Datei kann nicht geöffnet werden in Zeile 0. Speicherzugriffsfehler (Speicherabzug geschrieben) erup@ch-inspiron3670:~$ /usr/sbin/cupsfilter -p /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd -m printer/foo -e --list-filters /etc/services cupsfilter: Öffnen der PPD-Datei: PPD Datei kann nicht geöffnet werden in Zeile 0. Speicherzugriffsfehler (Speicherabzug geschrieben) erup@ch-inspiron3670:~$ |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Du bist immer noch nicht in der Gruppe lp 😕 Zeige nun mal sudo adduser $USER lp sowie lpstat -t |
(Themenstarter)
Anmeldungsdatum: Beiträge: 335 |
rup@ch-inspiron3670:~$ sudo adduser $USER lp [sudo] Passwort für erup: Benutzer »erup« wird der Gruppe »lp« hinzugefügt … Benutzer erup wird zur Gruppe lp hinzugefügt. Fertig. erup@ch-inspiron3670:~$ lpstat -t Zeitplandienst läuft systemvoreingestelltes Ziel: HP-LaserJet-Professional-P1102 Gerät für HP-LaserJet-Professional-P1102: hp:/usb/HP_LaserJet_Professional_P1102?serial=000000000Q87SN6CPR1a HP-LaserJet-Professional-P1102 akzeptiert Anfragen seit Mo 18 Jan 2021 16:30:19 CET Drucker HP-LaserJet-Professional-P1102 ist im Leerlauf. Aktiviert seit Mo 18 Jan 2021 16:30:19 CET erup@ch-inspiron3670:~$ |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Ok,Neustart und dann nochmal /usr/sbin/cupsfilter -p /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd -m printer/foo -e --list-filters /etc/services zeigen und Testen python3 /usr/share/hplip/testpage.py |
(Themenstarter)
Anmeldungsdatum: Beiträge: 335 |
Cerup@ch-inspiron3670:~$ /usr/sbin/cupsfilter -p /etc/cups/ppd/HP-LaserJet-Professional-P1102.ppd -m printer/foo -e --list-filters /etc/services cupsfilter: Dateirechte "/usr/lib/cups/filter/foomatic-rip" OK (0100755/uid=0/gid=0). cupsfilter: Dateirechte "/usr/lib/cups/filter/foomatic-rip" OK (0100755/uid=0/gid=0). cupsfilter: Dateirechte "/usr/lib/cups/filter/commandtops" OK (0100755/uid=0/gid=0). texttopdf pdftopdf foomatic-rip erup@ch-inspiron3670:~$ erup@ch-inspiron3670:~$ python3 /usr/share/hplip/testpage.py HP Linux Imaging and Printing System (ver. 3.20.3) Testpage Print Utility ver. 6.0 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Icon theme "elementary" not found. erup@ch-inspiron3670:~$ ode Die Testseite ist (wie immer) erschienen. Ein Versuch, eine Word-Seite (mit Libre writer erstellt) zu drucken ging leider fehl. |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Mit Libre habe ich erklärt ☹ Wie sieht es bei Softmaker nun aus? |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Zeige auch mal dpkg -l | egrep HP mir fehlt da was – glaub ich. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 335 |
Mit Textmaker ist alles bestens. Cod erup@ch-inspiron3670:~$ dpkg -l | egrep HP ii hplip 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging System (HPLIP) ii hplip-data 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - data files ii hplip-gui 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - GUI utilities (Qt-based) ii libhpmud0:amd64 3.20.3+dfsg0-2 amd64 HP Multi-Point Transport Driver (hpmud) run-time libraries ii libsane-hpaio:amd64 3.20.3+dfsg0-2 amd64 HP SANE backend for multi-function peripherals ii printer-driver-hpcups 3.20.3+dfsg0-2 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups) ii printer-driver-pnm2ppa 1.13+nondbs-0ubuntu6 amd64 printer driver for HP-GDI printers ii printer-driver-postscript-hp 3.20.3+dfsg0-2 amd64 HP Printers PostScript Descriptions ii printer-driver-pxljr 1.4+repack0-5 amd64 printer driver for HP Color LaserJet 35xx/36xx erup@ch-inspiron3670:~$ Mein Computer schaltet sich ab und zu aus, daher die längeren Pausen. |