ubuntuusers.de

Moin,

mache doch mal ein neues Thema auf: Habe mir, leider ohne viel nachzudenken, einen Epson ET4700 gekauft. Nun sitze ich da und kann nicht Drucken und auch nicht Scannen, da es anscheinend keinen passenden Treiber dafür gibt. Kann mir da jemand weiterhelfen ob ich den trotzdem irgendwie zum Laufen bekomme? Habe was von Turboprint gelesen. Kostet aber wohl auch einiges. Oder gibts da ne einfache Lösung?

Danke schonmal und LG Gebhard

Hallo Gebhard,

das gleiche Modell läuft auf diesem System einwandfrei. Bei Epson auf der richtigen Supportseite gibt's den Scannertreiber. Der Druckertreiber vom System ist ausreichend - allerdings solltest Du von Ubuntu MATE mindestens auf die LTS-Version 20.04 upgraden. 18.04 MATE hat seine sichere Lebensdauer überschritten.

Grüße

schollsky

Alles kar, danke. Hab verschiedene USB-Anschlüsse am Rechner probiert. Nu gehts.

Gruß Gebhard

So, noch ne Frage:

Drucken funzt einwandfrei. Scannen funktioniert nicht. Habe mir von der Epson-Seite den Imagescanner runter geladen und installiert. Weder Simple Scan noch der neue Image Scan finden den Scanner. Da gibts doch bestimmt einen Trick, oder?

Zeige mal bitte die Ausgaben von

dpkg -l | egrep 'ippusbxd|libusb-0.1-4|system-config-printer-udev'

export SANE_DEBUG_DLL=255 && scanimage -L

OK

dpkg -l | egrep 'ippusbxd|libusb-0.1-4|system-config-printer-udev'
ii  libusb-0.1-4:i386                      2:0.1.12-31                                         i386         userspace USB programming library
ii  system-config-printer-udev             1.5.11-1ubuntu2                                     i386         Utilities to detect and configure printers automatically

[dll] load: searching backend `u12' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-u12.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-u12.so.1'
[dll] init: initializing backend `u12'
[dll] init: backend `u12' is version 1.0.0
[dll] load: searching backend `teco3' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco3.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco3.so.1'
[dll] init: initializing backend `teco3'
[dll] init: backend `teco3' is version 1.0.1
[dll] load: searching backend `teco2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco2.so.1'
[dll] init: initializing backend `teco2'
[dll] init: backend `teco2' is version 1.0.10
[dll] load: searching backend `teco1' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-teco1.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-teco1.so.1'
[dll] init: initializing backend `teco1'
[dll] init: backend `teco1' is version 1.0.10
[dll] load: searching backend `tamarack' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-tamarack.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-tamarack.so.1'
[dll] init: initializing backend `tamarack'
[dll] init: backend `tamarack' is version 1.0.0
[dll] load: searching backend `sp15c' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sp15c.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sp15c.so.1'
[dll] init: initializing backend `sp15c'
[dll] init: backend `sp15c' is version 1.0.0
[dll] load: searching backend `snapscan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-snapscan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-snapscan.so.1'
[dll] init: initializing backend `snapscan'
[dll] init: backend `snapscan' is version 1.4.53
[dll] load: searching backend `sm3840' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sm3840.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sm3840.so.1'
[dll] init: initializing backend `sm3840'
[dll] init: backend `sm3840' is version 1.0.0
[dll] load: searching backend `sm3600' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sm3600.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sm3600.so.1'
[dll] init: initializing backend `sm3600'
[dll] init: backend `sm3600' is version 1.0.6
[dll] load: searching backend `sharp' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sharp.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sharp.so.1'
[dll] init: initializing backend `sharp'
[dll] init: backend `sharp' is version 1.0.0
[dll] load: searching backend `sceptre' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-sceptre.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-sceptre.so.1'
[dll] init: initializing backend `sceptre'
[dll] init: backend `sceptre' is version 1.0.10
[dll] load: searching backend `s9036' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-s9036.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-s9036.so.1'
[dll] init: initializing backend `s9036'
[dll] init: backend `s9036' is version 1.0.0
[dll] load: searching backend `rts8891' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-rts8891.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-rts8891.so.1'
[dll] init: initializing backend `rts8891'
[dll] init: backend `rts8891' is version 1.0.2401
[dll] load: searching backend `ricoh' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ricoh.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ricoh.so.1'
[dll] init: initializing backend `ricoh'
[dll] init: backend `ricoh' is version 1.0.0
[dll] load: searching backend `qcam' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-qcam.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-qcam.so.1'
[dll] init: initializing backend `qcam'
[dll] init: backend `qcam' is version 1.0.0
[dll] load: searching backend `plustek' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-plustek.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[dll] init: backend `plustek' is version 1.0.0
[dll] load: searching backend `pixma' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pixma.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-pixma.so.1'
[dll] init: initializing backend `pixma'
[dll] init: backend `pixma' is version 1.0.17
[dll] load: searching backend `pint' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pint.so.1'
[dll] load: couldn't open `/usr/lib/i386-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory)
[dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1'
[dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory)
[dll] load: couldn't find backend `pint' (No such file or directory)
[dll] load: searching backend `pie' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-pie.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-pie.so.1'
[dll] init: initializing backend `pie'
[dll] init: backend `pie' is version 1.0.9
[dll] load: searching backend `niash' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-niash.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-niash.so.1'
[dll] init: initializing backend `niash'
[dll] init: backend `niash' is version 1.0.1
[dll] load: searching backend `nec' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-nec.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-nec.so.1'
[dll] init: initializing backend `nec'
[dll] init: backend `nec' is version 1.0.0
[dll] load: searching backend `mustek_usb2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] init: initializing backend `mustek_usb2'
[dll] init: backend `mustek_usb2' is version 1.0.10
[dll] load: searching backend `mustek_usb' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] init: initializing backend `mustek_usb'
[dll] init: backend `mustek_usb' is version 1.0.18
[dll] load: searching backend `mustek' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-mustek.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-mustek.so.1'
[dll] init: initializing backend `mustek'
[dll] init: backend `mustek' is version 1.0.138
[dll] load: searching backend `microtek2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-microtek2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-microtek2.so.1'
[dll] init: initializing backend `microtek2'
[dll] init: backend `microtek2' is version 1.0.0
[dll] load: searching backend `microtek' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-microtek.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-microtek.so.1'
[dll] init: initializing backend `microtek'
[dll] init: backend `microtek' is version 1.0.0
[dll] load: searching backend `matsushita' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-matsushita.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-matsushita.so.1'
[dll] init: initializing backend `matsushita'
[dll] init: backend `matsushita' is version 1.0.7
[dll] load: searching backend `magicolor' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-magicolor.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-magicolor.so.1'
[dll] init: initializing backend `magicolor'
[dll] init: backend `magicolor' is version 1.0.1
[dll] load: searching backend `ma1509' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ma1509.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ma1509.so.1'
[dll] init: initializing backend `ma1509'
[dll] init: backend `ma1509' is version 1.0.3
[dll] load: searching backend `lexmark' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-lexmark.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-lexmark.so.1'
[dll] init: initializing backend `lexmark'
[dll] init: backend `lexmark' is version 1.0.32
[dll] load: searching backend `leo' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-leo.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-leo.so.1'
[dll] init: initializing backend `leo'
[dll] init: backend `leo' is version 1.0.11
[dll] load: searching backend `kvs20xx' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] init: initializing backend `kvs20xx'
[dll] init: backend `kvs20xx' is version 1.0.2
[dll] load: searching backend `kvs1025' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] init: initializing backend `kvs1025'
[dll] init: backend `kvs1025' is version 1.0.5
[dll] load: searching backend `kodakaio' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] init: initializing backend `kodakaio'
[dll] init: backend `kodakaio' is version 1.0.3
[dll] load: searching backend `kodak' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-kodak.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-kodak.so.1'
[dll] init: initializing backend `kodak'
[dll] init: backend `kodak' is version 1.0.7
[dll] load: searching backend `ibm' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-ibm.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-ibm.so.1'
[dll] init: initializing backend `ibm'
[dll] init: backend `ibm' is version 1.0.0
[dll] load: searching backend `hs2p' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hs2p.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hs2p.so.1'
[dll] init: initializing backend `hs2p'
[dll] init: backend `hs2p' is version 1.0.0
[dll] load: searching backend `hpljm1005' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] init: initializing backend `hpljm1005'
[dll] init: backend `hpljm1005' is version 1.0.1
[dll] load: searching backend `hp5590' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp5590.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp5590.so.1'
[dll] init: initializing backend `hp5590'
[dll] init: backend `hp5590' is version 1.0.7
[dll] load: searching backend `hp5400' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp5400.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp5400.so.1'
[dll] init: initializing backend `hp5400'
[dll] init: backend `hp5400' is version 1.0.3
[dll] load: searching backend `hp4200' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp4200.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp4200.so.1'
[dll] init: initializing backend `hp4200'
[dll] init: backend `hp4200' is version 1.0.0
[dll] load: searching backend `hp3500' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp3500.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp3500.so.1'
[dll] init: initializing backend `hp3500'
[dll] init: backend `hp3500' is version 1.0.0
[dll] load: searching backend `hpsj5s' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] init: initializing backend `hpsj5s'
[dll] init: backend `hpsj5s' is version 1.0.3
[dll] load: searching backend `hp3900' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp3900.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp3900.so.1'
[dll] init: initializing backend `hp3900'
[dll] init: backend `hp3900' is version 1.0.0
[dll] load: searching backend `hp' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hp.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hp.so.1'
[dll] init: initializing backend `hp'
[dll] init: backend `hp' is version 1.0.8
[dll] load: searching backend `gt68xx' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] init: initializing backend `gt68xx'
[dll] init: backend `gt68xx' is version 1.0.84
[dll] load: searching backend `genesys' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
[dll] init: initializing backend `genesys'
[dll] init: backend `genesys' is version 1.0.2511
[dll] load: searching backend `fujitsu' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] init: initializing backend `fujitsu'
[dll] init: backend `fujitsu' is version 1.0.133
[dll] load: searching backend `epsonds' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epsonds.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epsonds.so.1'
[dll] init: initializing backend `epsonds'
[dll] init: backend `epsonds' is version 1.0.0
[dll] load: searching backend `epson2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epson2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epson2.so.1'
[dll] init: initializing backend `epson2'
[dll] init: backend `epson2' is version 1.0.124
[dll] load: searching backend `epjitsu' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] init: initializing backend `epjitsu'
[dll] init: backend `epjitsu' is version 1.0.31
[dll] load: searching backend `dmc' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-dmc.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-dmc.so.1'
[dll] init: initializing backend `dmc'
[dll] init: backend `dmc' is version 1.0.0
[dll] load: searching backend `dell1600n_net' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] init: initializing backend `dell1600n_net'
[dll] init: backend `dell1600n_net' is version 1.0.0
[dll] load: searching backend `coolscan3' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] init: initializing backend `coolscan3'
[dll] init: backend `coolscan3' is version 1.0.0
[dll] load: searching backend `coolscan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-coolscan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-coolscan.so.1'
[dll] init: initializing backend `coolscan'
[dll] init: backend `coolscan' is version 1.0.0
[dll] load: searching backend `cardscan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-cardscan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-cardscan.so.1'
[dll] init: initializing backend `cardscan'
[dll] init: backend `cardscan' is version 1.0.3
[dll] load: searching backend `canon_dr' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] init: initializing backend `canon_dr'
[dll] init: backend `canon_dr' is version 1.0.56
[dll] load: searching backend `canon630u' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon630u.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon630u.so.1'
[dll] init: initializing backend `canon630u'
[dll] init: backend `canon630u' is version 1.0.1
[dll] load: searching backend `canon' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-canon.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-canon.so.1'
[dll] init: initializing backend `canon'
[dll] init: backend `canon' is version 1.0.0
[dll] load: searching backend `bh' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-bh.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-bh.so.1'
[dll] init: initializing backend `bh'
[dll] init: backend `bh' is version 1.0.4
[dll] load: searching backend `as6e' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-as6e.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-as6e.so.1'
[dll] init: initializing backend `as6e'
[dll] load: searching backend `artec_eplus48u' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] init: initializing backend `artec_eplus48u'
[dll] init: backend `artec_eplus48u' is version 1.0.0
[dll] load: searching backend `artec' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-artec.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-artec.so.1'
[dll] init: initializing backend `artec'
[dll] init: backend `artec' is version 1.0.0
[dll] load: searching backend `avision' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-avision.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-avision.so.1'
[dll] init: initializing backend `avision'
[dll] init: backend `avision' is version 1.0.297
[dll] load: searching backend `apple' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-apple.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-apple.so.1'
[dll] init: initializing backend `apple'
[dll] init: backend `apple' is version 1.0.0
[dll] load: searching backend `agfafocus' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] init: initializing backend `agfafocus'
[dll] init: backend `agfafocus' is version 1.0.0
[dll] load: searching backend `abaton' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-abaton.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-abaton.so.1'
[dll] init: initializing backend `abaton'
[dll] init: backend `abaton' is version 1.0.0
[dll] load: searching backend `net' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.27
[dll] load: searching backend `imagescan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-imagescan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-imagescan.so.1'
[dll] init: initializing backend `imagescan'
[dll] init: backend `imagescan' is version 1.1.0
[dll] load: searching backend `hpaio' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] sane_get_devices: found 0 devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `xerox_mfp's exit function
[dll] sane_exit: calling backend `umax1220u's exit function
[dll] sane_exit: calling backend `umax's exit function
[dll] sane_exit: calling backend `u12's exit function
[dll] sane_exit: calling backend `teco3's exit function
[dll] sane_exit: calling backend `teco2's exit function
[dll] sane_exit: calling backend `teco1's exit function
[dll] sane_exit: calling backend `tamarack's exit function
[dll] sane_exit: calling backend `sp15c's exit function
[dll] sane_exit: calling backend `snapscan's exit function
[dll] sane_exit: calling backend `sm3840's exit function
[dll] sane_exit: calling backend `sm3600's exit function
[dll] sane_exit: calling backend `sharp's exit function
[dll] sane_exit: calling backend `sceptre's exit function
[dll] sane_exit: calling backend `s9036's exit function
[dll] sane_exit: calling backend `rts8891's exit function
[dll] sane_exit: calling backend `ricoh's exit function
[dll] sane_exit: calling backend `qcam's exit function
[dll] sane_exit: calling backend `plustek's exit function
[dll] sane_exit: calling backend `pixma's exit function
[dll] sane_exit: calling backend `pie's exit function
[dll] sane_exit: calling backend `niash's exit function
[dll] sane_exit: calling backend `nec's exit function
[dll] sane_exit: calling backend `mustek_usb2's exit function
[dll] sane_exit: calling backend `mustek_usb's exit function
[dll] sane_exit: calling backend `mustek's exit function
[dll] sane_exit: calling backend `microtek2's exit function
[dll] sane_exit: calling backend `microtek's exit function
[dll] sane_exit: calling backend `matsushita's exit function
[dll] sane_exit: calling backend `magicolor's exit function
[dll] sane_exit: calling backend `ma1509's exit function
[dll] sane_exit: calling backend `lexmark's exit function
[dll] sane_exit: calling backend `leo's exit function
[dll] sane_exit: calling backend `kvs20xx's exit function
[dll] sane_exit: calling backend `kvs1025's exit function
[dll] sane_exit: calling backend `kodakaio's exit function
[dll] sane_exit: calling backend `kodak's exit function
[dll] sane_exit: calling backend `ibm's exit function
[dll] sane_exit: calling backend `hs2p's exit function
[dll] sane_exit: calling backend `hpljm1005's exit function
[dll] sane_exit: calling backend `hp5590's exit function
[dll] sane_exit: calling backend `hp5400's exit function
[dll] sane_exit: calling backend `hp4200's exit function
[dll] sane_exit: calling backend `hp3500's exit function
[dll] sane_exit: calling backend `hpsj5s's exit function
[dll] sane_exit: calling backend `hp3900's exit function
[dll] sane_exit: calling backend `hp's exit function
[dll] sane_exit: calling backend `gt68xx's exit function
[dll] sane_exit: calling backend `genesys's exit function
[dll] sane_exit: calling backend `fujitsu's exit function
[dll] sane_exit: calling backend `epsonds's exit function
[dll] sane_exit: calling backend `epson2's exit function
[dll] sane_exit: calling backend `epjitsu's exit function
[dll] sane_exit: calling backend `dmc's exit function
[dll] sane_exit: calling backend `dell1600n_net's exit function
[dll] sane_exit: calling backend `coolscan3's exit function
[dll] sane_exit: calling backend `coolscan's exit function
[dll] sane_exit: calling backend `cardscan's exit function
[dll] sane_exit: calling backend `canon_dr's exit function
[dll] sane_exit: calling backend `canon630u's exit function
[dll] sane_exit: calling backend `canon's exit function
[dll] sane_exit: calling backend `bh's exit function
[dll] sane_exit: calling backend `artec_eplus48u's exit function
[dll] sane_exit: calling backend `artec's exit function
[dll] sane_exit: calling backend `avision's exit function
[dll] sane_exit: calling backend `apple's exit function
[dll] sane_exit: calling backend `agfafocus's exit function
[dll] sane_exit: calling backend `abaton's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: calling backend `imagescan's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
gebhard@gebhard-OptiPlex-GX280:~$ 

Ganz schön viel, oder? 😬

Ist das ein 32Bit System? Zeige

uname -a

lscpu

Der Treiber wird auf 32 Bit nicht Funktionieren.

Ja, ist ein 32Bit System. Auf der Epson Homepage stand er allerdings für 32Bit.

uname -a
Linux gebhard-OptiPlex-GX280 4.15.0-161-generic #169-Ubuntu SMP Fri Oct 15 13:39:59 UTC 2021 i686 i686 i686 GNU/Linux

.

uname -a
Linux gebhard-OptiPlex-GX280 4.15.0-161-generic #169-Ubuntu SMP Fri Oct 15 13:39:59 UTC 2021 i686 i686 i686 GNU/Linux
gebhard@gebhard-OptiPlex-GX280:~$ lscpu
Architektur:             i686
CPU Operationsmodus:     32-bit
Byte-Reihenfolge:        Little Endian
CPU(s):                  1
Liste der Online-CPU(s): 0
Thread(s) pro Kern:      1
Kern(e) pro Socket:      1
Sockel:                  1
Anbieterkennung:         GenuineIntel
Prozessorfamilie:        15
Modell:                  4
Modellname:              Intel(R) Pentium(R) 4 CPU 2.80GHz
Stepping:                1
CPU MHz:                 2793.006
BogoMIPS:                5586.01
L1d Cache:               16K
L2 Cache:                1024K
Markierungen:            fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc pebs bts cpuid pni dtes64 monitor ds_cpl cid xtpr pti

Ah - ok.Dann mal bitte.

sudo mv /etc/sane.d/dll.conf /etc/sane.d/dll.conf.bak

danach nochmal die Ausgabe von

export SANE_DEBUG_DLL=255 && scanimage -L

OK, da kommt dann das raus:

gebhard@gebhard-OptiPlex-GX280:~$ export SANE_DEBUG_DLL=255 && scanimage -L
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/imagescan
[dll] sane_init/read_config: reading dll.d/imagescan
[dll] add_backend: adding backend `imagescan'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: Couldn't open config file (dll.conf): No such file or directory
[dll] sane_get_devices
[dll] load: searching backend `imagescan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-imagescan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-imagescan.so.1'
[dll] init: initializing backend `imagescan'
[dll] init: backend `imagescan' is version 1.1.0
[dll] load: searching backend `hpaio' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] sane_get_devices: found 0 devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `imagescan's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
gebhard@gebhard-OptiPlex-GX280:~$ 

Hast du nicht geschrieben das du den Treiber für dein Modell installiert hast??

Der Imagescan ist nicht der Richtige! Bei dir muss er Epsonscan2 heißen 😉

Scannertreiber

Oh, verdammt! Mein Fehler.

So, hab jetzt den Epsonscan2 installiert. Aber auch hier wird der Scanner nicht gefunden. ☹

Dann zeige erst mal wieder

export SANE_DEBUG_DLL=255 && scanimage -L

und

dpkg -l epson*

OK, danke für deine Geduld:

gebhard@gebhard-OptiPlex-GX280:~$ export SANE_DEBUG_DLL=255 && scanimage -L
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/epsonscan2
[dll] sane_init/read_config: reading dll.d/epsonscan2
[dll] add_backend: adding backend `epsonscan2'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/imagescan
[dll] sane_init/read_config: reading dll.d/imagescan
[dll] add_backend: adding backend `imagescan'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: Couldn't open config file (dll.conf): No such file or directory
[dll] sane_get_devices
[dll] load: searching backend `imagescan' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-imagescan.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-imagescan.so.1'
[dll] init: initializing backend `imagescan'
[dll] init: backend `imagescan' is version 1.1.0
[dll] load: searching backend `hpaio' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] load: searching backend `epsonscan2' in `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-epsonscan2.so.1'
[dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-epsonscan2.so.1'
[dll] init: initializing backend `epsonscan2'
[dll] init: backend `epsonscan2' is version 1.1.0
[dll] sane_get_devices: found 0 devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `imagescan's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: calling backend `epsonscan2's exit function
[dll] sane_exit: finished
gebhard@gebhard-OptiPlex-GX280:~$ 

.

gebhard@gebhard-OptiPlex-GX280:~$ dpkg -l epson*
dpkg-query: Kein Paket gefunden, das auf epsonscan2-bundle-6.6.2.5.i686.deb.tar.gz passt

Ok,der Treiber ist nun da.Mal einen Neustart machen.Wie ist der Epson angeschlossen?USB? Dann mal

lsusb

zeigen.