:~$ dpkg -l | egrep -v '^ii|rc'
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
+++-==========================================-============================================-============-===============================================================================
toni@toni-ideacentre-510-15ABR:~$
:~$ dpkg -l | egrep 'iscan|esci-*|epson|escpr|imagescan'
ii imagescan 3.61.0-1epson4ubuntu18.04 amd64 next generation image acquisition utilities
ii imagescan-plugin-gt-s650 1.0.2-1epson4ubuntu18.04 amd64 Image Scan v3 GT-S650 Interpreter Plugin
ii imagescan-plugin-networkscan 1.1.3-1epson4ubuntu18.04 amd64 Network scan plugin
ii imagescan-plugin-ocr-engine 1.0.2-1epson4ubuntu18.04 amd64 Image Scan v3 OCR Engine Plugin
ii printer-driver-escpr 1.6.17-2 amd64 printer driver for Epson Inkjet that use ESC/P-R
toni@toni-ideacentre-510-15ABR:~$
~$ export SANE_DEBUG_DLL=255 && scanimage -L
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `imagescan'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: `epson2' is already there
[dll] add_backend: adding backend `epson2'
[dll] add_backend: `epson2' is already there
[dll] add_backend: adding backend `epson2'
[dll] add_backend: `epson2' is already there
[dll] sane_get_devices
[dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] init: initializing backend `epson2'
[dll] init: backend `epson2' is version 1.0.124
[dll] load: searching backend `imagescan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-imagescan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-imagescan.so.1'
[dll] init: initializing backend `imagescan'
[dll] init: backend `imagescan' is version 1.1.0
[dll] sane_get_devices: found 1 devices
device `imagescan:esci:usb:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.1/1-1.1:1.0' is a EPSON XP-342_343_345_Series
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `epson2's exit function
[dll] sane_exit: calling backend `imagescan's exit function
[dll] sane_exit: finished
toni@toni-ideacentre-510-15ABR:~$
~$ export SANE_DEBUG_DLL=255 && scanimage -L
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `imagescan'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: `epson2' is already there
[dll] add_backend: adding backend `epson2'
[dll] add_backend: `epson2' is already there
[dll] add_backend: adding backend `epson2'
[dll] add_backend: `epson2' is already there
[dll] sane_get_devices
[dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] init: initializing backend `epson2'
[dll] init: backend `epson2' is version 1.0.124
[dll] load: searching backend `imagescan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-imagescan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-imagescan.so.1'
[dll] init: initializing backend `imagescan'
[dll] init: backend `imagescan' is version 1.1.0
[dll] sane_get_devices: found 1 devices
device `imagescan:esci:usb:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.1/1-1.1:1.0' is a EPSON XP-342_343_345_Series
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `epson2's exit function
[dll] sane_exit: calling backend `imagescan's exit function
[dll] sane_exit: finished
toni@toni-ideacentre-510-15ABR:~$
:~$ xscanimage
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `imagescan'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: `epson2' is already there
[dll] add_backend: adding backend `epson2'
[dll] add_backend: `epson2' is already there
[dll] add_backend: adding backend `epson2'
[dll] add_backend: `epson2' is already there
[dll] sane_get_devices
[dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] init: initializing backend `epson2'
[dll] init: backend `epson2' is version 1.0.124
[dll] load: searching backend `imagescan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-imagescan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-imagescan.so.1'
[dll] init: initializing backend `imagescan'
[dll] init: backend `imagescan' is version 1.1.0
[dll] sane_get_devices: found 1 devices
[dll] sane_open: trying to open `imagescan:esci:usb:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.1/1-1.1:1.0'
[dll] sane_open: open successful
[dll] sane_control_option(handle=0x55d55362a7e0,option=0,action=0,value=0x7ffc3a357e84,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=1)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=2)
[dll] sane_control_option(handle=0x55d55362a7e0,option=2,action=0,value=0x55d553666ed0,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=3)
[dll] sane_control_option(handle=0x55d55362a7e0,option=3,action=0,value=0x7ffc3a357c0c,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=4)
[dll] sane_control_option(handle=0x55d55362a7e0,option=4,action=0,value=0x55d553519120,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=5)
[dll] sane_control_option(handle=0x55d55362a7e0,option=5,action=0,value=0x55d553519120,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=6)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=7)
[dll] sane_control_option(handle=0x55d55362a7e0,option=7,action=0,value=0x7ffc3a357c0c,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=8)
[dll] sane_control_option(handle=0x55d55362a7e0,option=8,action=0,value=0x7ffc3a357c0c,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=9)
[dll] sane_control_option(handle=0x55d55362a7e0,option=9,action=0,value=0x7ffc3a357c0c,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=10)
[dll] sane_control_option(handle=0x55d55362a7e0,option=10,action=0,value=0x7ffc3a357c0c,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=11)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=12)
[dll] sane_control_option(handle=0x55d55362a7e0,option=12,action=0,value=0x55d553668340,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=13)
[dll] sane_control_option(handle=0x55d55362a7e0,option=13,action=0,value=0x7ffc3a357c0c,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=14)
[dll] sane_control_option(handle=0x55d55362a7e0,option=14,action=0,value=0x7ffc3a357c0c,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=15)
[dll] sane_control_option(handle=0x55d55362a7e0,option=15,action=0,value=0x7ffc3a357c0c,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=16)
[dll] sane_control_option(handle=0x55d55362a7e0,option=16,action=0,value=0x7ffc3a357c0c,info=(nil))
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=17)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=18)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=19)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=20)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=21)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=22)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=23)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=24)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=25)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=26)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=27)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=28)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=29)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=30)
[dll] sane_get_option_descriptor(handle=0x55d55362a7e0,option=31)
[dll] sane_control_option(handle=0x55d55362a7e0,option=31,action=0,value=0x55d5535cf2f0,info=(nil))
[dll] sane_get_parameters(handle=0x55d55362a7e0,params=0x7ffc3a357ee0)
Fehlt hier der XP-345 ?
sudo lshw
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 0.2
Bus-Informationen: pci@0000:00:00.2
Version: 00
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: msi ht cap_list
Konfiguration: latency=0
*-pci:0
Beschreibung: PCI bridge
Produkt: Family 15h (Models 60h-6fh) Processor Root Port
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 2.1
Bus-Informationen: pci@0000:00:02.1
Version: 00
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pci pm pciexpress msi ht normal_decode bus_master cap_list
Konfiguration: driver=pcieport
Ressourcen: irq:26 memory:fe500000-fe5fffff
*-storage
Beschreibung: Non-Volatile memory controller
Produkt: NVMe SSD Controller SM961/PM961
Hersteller: Samsung Electronics Co Ltd
Physische ID: 0
Bus-Informationen: pci@0000:01:00.0
Version: 00
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: storage pm msi pciexpress msix nvm_express bus_master cap_list
Konfiguration: driver=nvme latency=0
Ressourcen: irq:37 memory:fe500000-fe503fff
*-pci:1
Beschreibung: PCI bridge
Produkt: Family 15h (Models 60h-6fh) Processor Root Port
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 2.3
Bus-Informationen: pci@0000:00:02.3
Version: 00
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pci pm pciexpress msi ht normal_decode bus_master cap_list
Konfiguration: driver=pcieport
Ressourcen: irq:27 ioport:e000(Größe=4096) memory:fe400000-fe4fffff ioport:f2000000(Größe=1048576)
*-network
Beschreibung: Ethernet interface
Produkt: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Hersteller: Realtek Semiconductor Co., Ltd.
Physische ID: 0
Bus-Informationen: pci@0000:02:00.0
Logischer Name: enp2s0
Version: 0c
Seriennummer: 6c:4b:90:60:73:09
Größe: 1Gbit/s
Kapazität: 1Gbit/s
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.2.105 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
Ressourcen: irq:36 ioport:e000(Größe=256) memory:fe400000-fe400fff memory:f2000000-f2003fff
*-pci:2
Beschreibung: PCI bridge
Produkt: Family 15h (Models 60h-6fh) Processor Root Port
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 2.4
Bus-Informationen: pci@0000:00:02.4
Version: 00
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pci pm pciexpress msi ht normal_decode bus_master cap_list
Konfiguration: driver=pcieport
Ressourcen: irq:28 ioport:d000(Größe=4096) memory:fe300000-fe3fffff
*-network
Beschreibung: Kabellose Verbindung
Produkt: RTL8821AE 802.11ac PCIe Wireless Network Adapter
Hersteller: Realtek Semiconductor Co., Ltd.
Physische ID: 0
Bus-Informationen: pci@0000:03:00.0
Logischer Name: wlp3s0
Version: 00
Seriennummer: b0:fc:36:4d:77:c3
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm msi pciexpress bus_master cap_list ethernet physical wireless
Konfiguration: broadcast=yes driver=rtl8821ae driverversion=4.15.0-70-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11
Ressourcen: irq:45 ioport:d000(Größe=256) memory:fe300000-fe303fff
*-pci:3
Beschreibung: PCI bridge
Produkt: Family 15h (Models 60h-6fh) Processor Root Port
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 3.1
Bus-Informationen: pci@0000:00:03.1
Version: 00
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pci pm pciexpress msi ht normal_decode bus_master cap_list
Konfiguration: driver=pcieport
Ressourcen: irq:30 ioport:c000(Größe=4096) memory:fd000000-fe0fffff ioport:e8000000(Größe=167772160)
*-display
Beschreibung: VGA compatible controller
Produkt: GK208B [GeForce GT 730]
Hersteller: NVIDIA Corporation
Physische ID: 0
Bus-Informationen: pci@0000:04:00.0
Version: a1
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom
Konfiguration: driver=nouveau latency=0
Ressourcen: irq:47 memory:fd000000-fdffffff memory:e8000000-efffffff memory:f0000000-f1ffffff ioport:c000(Größe=128) memory:fe000000-fe07ffff
*-multimedia
Beschreibung: Audio device
Produkt: GK208 HDMI/DP Audio Controller
Hersteller: NVIDIA Corporation
Physische ID: 0.1
Bus-Informationen: pci@0000:04:00.1
Version: a1
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pm msi pciexpress bus_master cap_list
Konfiguration: driver=snd_hda_intel latency=0
Ressourcen: irq:36 memory:fe080000-fe083fff
*-generic:1 UNGEFORDERT
Beschreibung: Encryption controller
Produkt: Advanced Micro Devices, Inc. [AMD]
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 8
Bus-Informationen: pci@0000:00:08.0
Version: 00
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: msix ht pm bus_master cap_list
Konfiguration: latency=0
Ressourcen: memory:f2100000-f211ffff memory:fe200000-fe2fffff memory:fe60b000-fe60bfff memory:fe606000-fe607fff
*-multimedia
Beschreibung: Computer telephony device
Produkt: Family 15h (Models 60h-6fh) Audio Controller
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 9.2
Bus-Informationen: pci@0000:00:09.2
Version: 00
Breite: 32 bits
Takt: 33MHz
Fähigkeiten: pm bus_master cap_list
Konfiguration: driver=snd_hda_intel latency=0
Ressourcen: irq:43 memory:fe600000-fe603fff
*-usb
Beschreibung: USB controller
Produkt: FCH USB XHCI Controller
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 10
Bus-Informationen: pci@0000:00:10.0
Version: 20
Breite: 64 bits
Takt: 33MHz
Fähigkeiten: pm msi msix pciexpress xhci bus_master cap_list
Konfiguration: driver=xhci_hcd latency=0
Ressourcen: irq:18 memory:fe604000-fe605fff
*-usbhost:0
Produkt: xHCI Host Controller
Hersteller: Linux 4.15.0-70-generic xhci-hcd
Physische ID: 0
Bus-Informationen: usb@1
Logischer Name: usb1
Version: 4.15
Fähigkeiten: usb-2.00
Konfiguration: driver=hub slots=4 speed=480Mbit/s
*-usb:0
Beschreibung: USB-Hub
Produkt: USB2.0 Hub
Hersteller: Genesys Logic, Inc.
Physische ID: 1
Bus-Informationen: usb@1:1
Version: 60.52
Fähigkeiten: usb-2.00
Konfiguration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
*-usb:0
Beschreibung: Drucker
Produkt: XP-342 343 345 Series
Hersteller: EPSON
Physische ID: 1
Bus-Informationen: usb@1:1.1
Logischer Name: scsi2
Version: 1.00
Seriennummer: 583243543136333507
Fähigkeiten: usb-2.00 bidirectional emulated scsi-host
Konfiguration: driver=usb-storage maxpower=2mA speed=480Mbit/s
*-disk
Beschreibung: SCSI Disk
Produkt: Storage
Hersteller: EPSON
Physische ID: 0.0.0
Bus-Informationen: scsi@2:0.0.0
Logischer Name: /dev/sdb
Version: 1.00
Fähigkeiten: removable
Konfiguration: ansiversion=2 logicalsectorsize=512 sectorsize=512
*-medium
Physische ID: 0
Logischer Name: /dev/sdb
*-usb:1
Beschreibung: USB-Hub
Produkt: USB2.0 Hub
Hersteller: Genesys Logic, Inc.
Physische ID: 2
Bus-Informationen: usb@1:1.2
Version: 77.64
Fähigkeiten: usb-2.00
Konfiguration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
*-usb
Beschreibung: Tastatur
Produkt: Lenovo Calliope USB Keyboard
Hersteller: Lenovo
Physische ID: 1
Bus-Informationen: usb@1:1.2.1
Version: 2.18
Fähigkeiten: usb-2.00
Konfiguration: driver=usbhid maxpower=100mA speed=1Mbit/s
*-usb:2
Beschreibung: Bluetooth-Schnittstelle
Produkt: Bluetooth Radio
Hersteller: Realtek
Physische ID: 3
Bus-Informationen: usb@1:1.3
Version: 2.00
Seriennummer: 00e04c000001
Fähigkeiten: bluetooth usb-2.10
Konfiguration: driver=btusb maxpower=500mA speed=12Mbit/s
*-usb:1
Beschreibung: USB-Hub
Produkt: USB2.0 Hub
Hersteller: Genesys Logic, Inc.
Physische ID: 2
Bus-Informationen: usb@1:2
Version: 60.52
Fähigkeiten: usb-2.00
Konfiguration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
*-usb:0
Beschreibung: Tastatur
Produkt: 2.4G RX
Hersteller: DaKai
Physische ID: 2
Bus-Informationen: usb@1:2.2
Version: 3.11
Fähigkeiten: usb-1.10
Konfiguration: driver=usbhid maxpower=100mA speed=1Mbit/s
*-usb:1
Beschreibung: Allgemeines USB-Gerät
Produkt: USB2.0-CRW
Hersteller: Generic
Physische ID: 3
Bus-Informationen: usb@1:2.3
Version: 39.60
Seriennummer: 20100201396000000
Fähigkeiten: usb-2.00
Konfiguration: driver=rtsx_usb maxpower=500mA speed=480Mbit/s
*-usbhost:1
Produkt: xHCI Host Controller
Hersteller: Linux 4.15.0-70-generic xhci-hcd
Physische ID: 1
Bus-Informationen: usb@2
Logischer Name: usb2
Version: 4.15
Fähigkeiten: usb-3.00
Konfiguration: driver=hub slots=4 speed=5000Mbit/s
*-storage
Beschreibung: SATA controller
Produkt: FCH SATA Controller [AHCI mode]
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 11
Bus-Informationen: pci@0000:00:11.0
Version: 49
Breite: 32 bits
Takt: 66MHz
Fähigkeiten: storage pm ahci_1.0 bus_master cap_list
Konfiguration: driver=ahci latency=32
Ressourcen: irq:19 ioport:f040(Größe=8) ioport:f030(Größe=4) ioport:f020(Größe=8) ioport:f010(Größe=4) ioport:f000(Größe=16) memory:fe609000-fe6093ff
*-serial
Beschreibung: SMBus
Produkt: FCH SMBus Controller
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 14
Bus-Informationen: pci@0000:00:14.0
Version: 4a
Breite: 32 bits
Takt: 66MHz
Konfiguration: driver=piix4_smbus latency=0
Ressourcen: irq:0
*-isa
Beschreibung: ISA bridge
Produkt: FCH LPC Bridge
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 14.3
Bus-Informationen: pci@0000:00:14.3
Version: 11
Breite: 32 bits
Takt: 66MHz
Fähigkeiten: isa bus_master
Konfiguration: latency=0
*-generic:2
Beschreibung: SD Host controller
Produkt: FCH SD Flash Controller
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 14.7
Bus-Informationen: pci@0000:00:14.7
Version: 01
Breite: 64 bits
Takt: 66MHz
Fähigkeiten: msi pm bus_master cap_list
Konfiguration: driver=sdhci-pci latency=39
Ressourcen: irq:16 memory:fe608000-fe6080ff
*-pci:1
Beschreibung: Host bridge
Produkt: Family 15h (Models 60h-6fh) Host Bridge
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 101
Bus-Informationen: pci@0000:00:02.0
Version: 00
Breite: 32 bits
Takt: 33MHz
*-pci:2
Beschreibung: Host bridge
Produkt: Family 15h (Models 60h-6fh) Host Bridge
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 102
Bus-Informationen: pci@0000:00:03.0
Version: 00
Breite: 32 bits
Takt: 33MHz
*-pci:3
Beschreibung: Host bridge
Produkt: Advanced Micro Devices, Inc. [AMD]
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 103
Bus-Informationen: pci@0000:00:09.0
Version: 00
Breite: 32 bits
Takt: 33MHz
*-pci:4
Beschreibung: Host bridge
Produkt: Family 15h (Models 60h-6fh) Processor Function 0
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 104
Bus-Informationen: pci@0000:00:18.0
Version: 00
Breite: 32 bits
Takt: 33MHz
*-pci:5
Beschreibung: Host bridge
Produkt: Family 15h (Models 60h-6fh) Processor Function 1
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 105
Bus-Informationen: pci@0000:00:18.1
Version: 00
Breite: 32 bits
Takt: 33MHz
*-pci:6
Beschreibung: Host bridge
Produkt: Family 15h (Models 60h-6fh) Processor Function 2
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 106
Bus-Informationen: pci@0000:00:18.2
Version: 00
Breite: 32 bits
Takt: 33MHz
*-pci:7
Beschreibung: Host bridge
Produkt: Family 15h (Models 60h-6fh) Processor Function 3
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 107
Bus-Informationen: pci@0000:00:18.3
Version: 00
Breite: 32 bits
Takt: 33MHz
Konfiguration: driver=k10temp
Ressourcen: irq:0
*-pci:8
Beschreibung: Host bridge
Produkt: Family 15h (Models 60h-6fh) Processor Function 4
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 108
Bus-Informationen: pci@0000:00:18.4
Version: 00
Breite: 32 bits
Takt: 33MHz
Konfiguration: driver=fam15h_power
Ressourcen: irq:0
*-pci:9
Beschreibung: Host bridge
Produkt: Family 15h (Models 60h-6fh) Processor Function 5
Hersteller: Advanced Micro Devices, Inc. [AMD]
Physische ID: 109
Bus-Informationen: pci@0000:00:18.5
Version: 00
Breite: 32 bits
Takt: 33MHz
*-scsi:0
Physische ID: 1
Logischer Name: scsi0
Fähigkeiten: emulated
*-disk
Beschreibung: ATA Disk
Produkt: WDC WD10EZEX-08W
Hersteller: Western Digital
Physische ID: 0.0.0
Bus-Informationen: scsi@0:0.0.0
Logischer Name: /dev/sda
Version: 1A02
Seriennummer: WD-WCC6Y2VH6LXU
Größe: 931GiB (1TB)
Fähigkeiten: gpt-1.00 partitioned partitioned:gpt
Konfiguration: ansiversion=5 guid=c66f7f46-bbf4-4870-bac3-1bd9bb89dd2c logicalsectorsize=512 sectorsize=4096
*-volume:0
Beschreibung: Windows NTFS Laufwerk
Hersteller: Windows
Physische ID: 1
Bus-Informationen: scsi@0:0.0.0,1
Logischer Name: /dev/sda1
Version: 3.1
Seriennummer: 8ccfe2af-af75-9442-a4ba-c7fd447b1a7a
Größe: 92GiB
Kapazität: 92GiB
Fähigkeiten: ntfs initialized
Konfiguration: clustersize=4096 created=2018-04-23 02:12:57 filesystem=ntfs name=Basic data partition state=clean
*-volume:1
Beschreibung: Windows FAT Laufwerk
Hersteller: mkfs.fat
Physische ID: 2
Bus-Informationen: scsi@0:0.0.0,2
Logischer Name: /dev/sda2
Version: FAT32
Seriennummer: ed6b-814c
Größe: 501MiB
Kapazität: 511MiB
Fähigkeiten: boot fat initialized
Konfiguration: FATs=2 filesystem=fat name=EFI System Partition
*-volume:2
Beschreibung: EXT4-Laufwerk
Hersteller: Linux
Physische ID: 3
Bus-Informationen: scsi@0:0.0.0,3
Logischer Name: /dev/sda3
Logischer Name: /
Version: 1.0
Seriennummer: 1fd578d5-05b1-43a2-a1c0-70e1b50c6099
Größe: 838GiB
Fähigkeiten: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
Konfiguration: created=2019-01-16 14:17:10 filesystem=ext4 lastmountpoint=/ modified=2019-11-15 15:20:53 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2019-11-15 15:20:56 state=mounted
*-scsi:1
Physische ID: 2
Logischer Name: scsi1
Fähigkeiten: emulated
*-cdrom
Beschreibung: DVD writer
Produkt: DVD-RW DA8AESH
Hersteller: PLDS
Physische ID: 0.0.0
Bus-Informationen: scsi@1:0.0.0
Logischer Name: /dev/cdrom
Logischer Name: /dev/cdrw
Logischer Name: /dev/dvd
Logischer Name: /dev/dvdrw
Logischer Name: /dev/sr0
Version: XL6M
Fähigkeiten: removable audio cd-r cd-rw dvd dvd-r
Konfiguration: ansiversion=5 status=nodisc
toni@toni-ideacentre-510-15ABR:~$
Code