Hallo, ich habe ein Problem mit dem Booten von Ubuntu. Meist dauert es 3 Neustarts bis Ubuntu normal hochfährt. Bei dem ersten Anlauf habe ich nur einen Dunkel-lila Bildschirm, beim 2. kommt erst Grub zur Auswahl von Ubuntu, ich wähle normal starten, dann ein blinkender Cursor und dann die weiter unten erläuterte Meldung.
Es sei noch gesagt das ich meine HDD in ein neues System eingebaut habe, als der Fehler auftrat habe ich Ubuntu neu aufgespielt und auf der /Home Partition alles bis auf meine Dokumente gelöscht. Ich habe noch eine 2. SSD auf der Win7 ist, die PLatten werden nie zusammen betrieben (Strom-switch), dieses läuft ohne Probleme.
Gave up waiting for root device - Bootargs cat/proc/cmdline - Check rootdelay - Check root - Missing modules (cat/proc/modulesjls/dev Alert! /dev/disk/by-uuid/ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 does not exist Dropping to a shell BusyBox v.1.18.5 ( ubuntu 1:1.18.5.1 ubuntu4 ) buildin shell ( ash ) Enter help for a list of build-in commands. (initramfs)
Boot Info Script 0.60
Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for on this drive. sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 Köpfe, 63 Sektoren/Spur, 60801 Zylinder, zusammen 976773168 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda2 * 2,046 976,771,071 976,769,026 5 Extended /dev/sda5 586,149,888 595,912,703 9,762,816 82 Linux swap / Solaris /dev/sda6 595,914,752 976,771,071 380,856,320 83 Linux /dev/sda7 2,048 586,147,839 586,145,792 83 Linux "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda5 84c8f859-e742-457c-908e-8aca9f039872 swap /dev/sda6 ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 ext4 /dev/sda7 6ecab53b-24c7-4fb7-9b88-f13993e2907d ext4 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda6 / ext4 (rw,errors=remount-ro) /dev/sda7 /home ext4 (rw) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 set locale_dir=($root)/boot/grub/locale set lang=de_DE insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, mit Linux 3.2.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 linux /boot/vmlinuz-3.2.0-30-generic root=UUID=ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-30-generic } menuentry 'Ubuntu, mit Linux 3.2.0-30-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 echo 'Linux 3.2.0-30-generic wird geladen …' linux /boot/vmlinuz-3.2.0-30-generic root=UUID=ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 ro recovery nomodeset echo 'Initiale Ramdisk wird geladen …' initrd /boot/initrd.img-3.2.0-30-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, mit Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 linux /boot/vmlinuz-3.2.0-23-generic root=UUID=ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic } menuentry 'Ubuntu, mit Linux 3.2.0-23-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 echo 'Linux 3.2.0-23-generic wird geladen …' linux /boot/vmlinuz-3.2.0-23-generic root=UUID=ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 ro recovery nomodeset echo 'Initiale Ramdisk wird geladen …' initrd /boot/initrd.img-3.2.0-23-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=ca2e8b2d-a5c0-4c6f-b68a-8d5e22a588f7 / ext4 errors=remount-ro 0 1 # /home was on /dev/sda7 during installation UUID=6ecab53b-24c7-4fb7-9b88-f13993e2907d /home ext4 defaults 0 2 # swap was on /dev/sda5 during installation UUID=84c8f859-e742-457c-908e-8aca9f039872 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-23-generic 2 = boot/initrd.img-3.2.0-30-generic 2 = boot/vmlinuz-3.2.0-23-generic 1 = boot/vmlinuz-3.2.0-30-generic 1 = initrd.img 2 = initrd.img.old 2 = vmlinuz 1 = vmlinuz.old 1 =============================== StdErr Messages: =============================== unlzma: (stdin): Komprimierte Daten sind korrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in
Moderiert von tomtomtom:
Ins passende Forum verschoben. Bitte beachte die Themenstickies.