Moin Moin zusammen,
leider schaffe ich es nicht ohne Hilfe meinen "neuen gebrauchten" Scanner in Betrieb zu nehmen.
Zunächst ein paar Eckdaten: Scanner hat installierte Netzwerkkarte. Per Webinterface komme ich drauf und konnte die IP statisch einstellen. Auf ein Ping folgt ein Pong ☺
Über die Herstellerwebsite habe ich das deb-Paket (iscan-bundle-1.0.4.x64.deb.tar.gz) geladen, entpackt und ohne Fehlermeldung installiert.
Die Ausgabe von "sudo systemctl status saned.socket"
● saned.socket - saned incoming socket Loaded: loaded (/lib/systemd/system/saned.socket; enabled; vendor preset: enabled) Active: active (listening) since Di 2017-04-04 19:42:26 CEST; 19min ago Listen: [::]:6566 (Stream) Accepted: 0; Connected: 0 Apr 04 19:42:26 T5500 systemd[1]: Listening on saned incoming socket.
Der Inhalt von "/etc/sane.d/net.conf" (Kommentarzeilen gekürzt)
connect_timeout = 10 192.168.1.116
Ausgabe von "sane-find-scanner"
# sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. could not open USB device 0x0424/0x4060 at 002:006: Access denied (insufficient permissions) could not open USB device 0x0424/0x2640 at 002:004: Access denied (insufficient permissions) could not open USB device 0x0424/0x2514 at 002:002: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions) could not open USB device 0x043d/0x0019 at 008:002: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 008:001: Access denied (insufficient permissions) could not open USB device 0x0a5f/0x0009 at 007:002: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 007:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 006:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 005:001: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient permissions) could not open USB device 0x046d/0xc018 at 003:002: Access denied (insufficient permissions) could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions) # No USB scanners found. If you expected something different, make sure that # you have loaded a kernel driver for your USB host controller and have setup # the USB system correctly. See man sane-usb for details. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary.
Leider ist die Ausgabe von "scanimage -L"
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
Besten Dank für jede Hilfe 😉