E: Paket libsane-extras kann nicht gefunden werden.
Verzweiflungstat? Das gibt's nur noch für Bionic.
Anmeldungsdatum: Beiträge: 9563 |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 58 |
Bei Start epsonscan2 im Terminal kommt: libpng warning: iCCP: known incorrect sRGB profile und bei $ sudo rm epsonscan2 rm: das Entfernen von 'epsonscan2' ist nicht möglich: Datei oder Verzeichnis nicht gefunden Nun zum Kellerkind_2009
Letztendlich habe ich epsonscan2 und epsonscan2-non-free-plugin uninstalled bzw gepurged mit Synaptic. Dann iscan-perfection-v330-bundle-2.30.4.x64.deb heruntergeladen von EPSON und mit ~/Donwload/iscan-perfection-v330-bundle-2.30.4.x64.deb$ sudo sh install.sh installiert. Image Scan! for Linux laufen lassen ; leider wird nur TPU für für neg.Film als Auswahl angeboten, also kein einzeln Dia‘s aber die Dias sind als Film gescanned und sichtbar. Ich werde wohl auf Win10 ausweichen. Allen vielen dank. Bei W10 lief das Scannen von Dia‘s problemlos; aber das war nicht Sinn der Übung. Ich werde auch VueScan daher nicht weiter verfolgen. |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 58 |
Bei Start epsonscan2 im Terminal kommt: libpng warning: iCCP: known incorrect sRGB profile und bei $ sudo rm epsonscan2 rm: das Entfernen von 'epsonscan2' ist nicht möglich: Datei oder Verzeichnis nicht gefunden Nun zum Kellerkind_2009
Letztendlich habe ich epsonscan2 und epsonscan2-non-free-plugin uninstalled bzw gepurged mit Synaptic. Dann iscan-perfection-v330-bundle-2.30.4.x64.deb heruntergeladen von EPSON und mit ~/Donwload/iscan-perfection-v330-bundle-2.30.4.x64.deb$ sudo sh install.sh installiert. Image Scan! for Linux laufen lassen ; leider wird nur TPU für für neg.Film als Auswahl angeboten, also kein einzeln Dia‘s aber die Dias sind als Film gescanned und sichtbar. Ich werde wohl auf Win10 ausweichen. Allen vielen dank. Bei W10 lief das Scannen von Dia‘s problemlos; aber das war nicht Sinn der Übung. Ich werde auch VueScan daher nicht weiter verfolgen. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 58 |
Bei Start epsonscan2 im Terminal kommt: libpng warning: iCCP: known incorrect sRGB profile und bei $ sudo rm epsonscan2 rm: das Entfernen von 'epsonscan2' ist nicht möglich: Datei oder Verzeichnis nicht gefunden Nun zum Kellerkind_2009
Letztendlich habe ich epsonscan2 und epsonscan2-non-free-plugin uninstalled bzw gepurged mit Synaptic. Dann iscan-perfection-v330-bundle-2.30.4.x64.deb heruntergeladen von EPSON und mit ~/Donwload/iscan-perfection-v330-bundle-2.30.4.x64.deb$ sudo sh install.sh installiert. Image Scan! for Linux laufen lassen ; leider wird nur TPU für für neg.Film als Auswahl angeboten, also kein einzeln Dia‘s aber die Dias sind als Film gescanned und sichtbar. Ich werde wohl auf Win10 ausweichen. Allen vielen dank. Bei W10 lief das Scannen von Dia‘s problemlos; aber das war nicht Sinn der Übung. Ich werde auch VueScan daher nicht weiter verfolgen. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 58 |
Entschuldigung , aber ich habe wohl meinen Beitreg 3x abgeschicht da ich nicht mit bekommen habe dass die Seite 2 bereits existiert.
Dass nun wiederum nicht. Ich hatte vor nur ein Paar Dia's zu scannen und gedacht vielleicht ein Plug-in nachzuladen zu müssen bzw auf einen Verständnis-Problem zu stoßen. Schließlich funktioniert die aktuelle EPSON Treiber-SW.Siehe
Sei mir nicht böse , ich gehe auf die bijna 80 zu , verstehe alles nicht mehr so und bewundere eurere Unterstützung |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Ist gar nicht aufgefallen 😬
Kannst du mal ein Screenshot deiner Xsane Einstellung zeigen?
Gerne 😉 Zeige bitte mal noch scanimage -L und scanimage -A |
(Themenstarter)
Anmeldungsdatum: Beiträge: 58 |
Nun kommt wenigstens der Auswahl Lichtdurchsatz; hatte probeweise installiert : dick@Dundee:~$ cd /home/dick/Donwload/iscan-perfection-v330-bundle-2.30.4.x64.deb' also wird NUR Film-scan erkannt, keinen Dia-scan |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 58 |
hier noch beide Terminal_Echo's (Anwendung XSANE lief zeitweise noch), dann beendet : dick@Dundee:~$ scanimage -L device `epkowa:interpreter:003:002' is a Epson (unknown model) flatbed scanner dick@Dundee:~$ scanimage -A Output format is not set, using pnm as a default. scanimage: open of device epkowa:interpreter:003:002 failed: Device busy dick@Dundee:~$ scanimage -A Output format is not set, using pnm as a default. scanimage: open of device epkowa:interpreter:003:002 failed: Device busy dick@Dundee:~$ scanimage -A Output format is not set, using pnm as a default. All options specific to device `epkowa:interpreter:003:004': Scan Mode: --mode Binary|Gray|Color [Color] Selects the scan mode (e.g., lineart, monochrome, or color). --depth 8|16 [8] Number of bits per sample, typical values are 1 for "line-art" and 8 for multibit scans. --halftoning None|Halftone A (Hard Tone)|Halftone B (Soft Tone)|Halftone C (Net Screen) [inactive] Selects the halftone. --dropout None|Red|Green|Blue [inactive] Selects the dropout. --brightness-method iscan|gimp [iscan] Selects a method to change the brightness of the acquired image. --brightness -100..100 (in steps of 1) [0] Controls the brightness of the acquired image. --contrast -100..100 (in steps of 1) [0] Controls the contrast of the acquired image. --sharpness -2..2 [inactive] --gamma-correction User defined (Gamma=1.0)|User defined (Gamma=1.8) [User defined (Gamma=1.8)] Selects the gamma correction value from a list of pre-defined devices or the user defined table, which can be downloaded to the scanner --color-correction User defined [inactive] Sets the color correction table for the selected output device. --resolution 100|200|300|600|1200|2400|4800dpi [300] Sets the resolution of the scanned image. --x-resolution 100|200|300|450|600|1200|2400|4800dpi [300] Sets the horizontal resolution of the scanned image. --y-resolution 100|200|300|400|600|800|1200|1800|2400|3600|4800|6600|9600dpi [300] Sets the vertical resolution of the scanned image. --threshold 0..255 [inactive] Select minimum-brightness to get a white point Advanced: --mirror[=(yes|no)] [inactive] Mirror the image. --speed[=(yes|no)] [no] Determines the speed at which the scan proceeds. --auto-area-segmentation[=(yes|no)] [inactive] --short-resolution[=(yes|no)] [no] Display short resolution list --zoom 50..200 [inactive] Defines the zoom factor the scanner will use --red-gamma-table 0..255,... Gamma-correction table for the red band. --green-gamma-table 0..255,... Gamma-correction table for the green band. --blue-gamma-table 0..255,... Gamma-correction table for the blue band. --wait-for-button[=(yes|no)] [no] After sending the scan command, wait until the button on the scanner is pressed to actually start the scan process. --monitor-button[=(yes|no)] [no] [read-only] Indicates whether a button on the scanner has been pressed. --polling-time <int> [1000000] [read-only] Time between queries when waiting for device state changes. --needs-polling[=(yes|no)] [no] [read-only] Indicates whether the scanner needs to poll. Color correction coefficients: --cct-1 -2..2 [1.2663] Controls red level --cct-2 -2..2 [-0.215698] Adds to red based on green level --cct-3 -2..2 [-0.0505981] Adds to red based on blue level --cct-4 -2..2 [-0.14119] Adds to green based on red level --cct-5 -2..2 [1.2428] Controls green level --cct-6 -2..2 [-0.101593] Adds to green based on blue level --cct-7 -2..2 [-0.00279236] Adds to blue based on red level --cct-8 -2..2 [-0.330292] Adds to blue based on green level --cct-9 -2..2 [1.3331] Control blue level Preview: --preview[=(yes|no)] [no] Request a preview-quality scan. --preview-speed[=(yes|no)] [no] Geometry: --scan-area Maximum|A4|A5 Landscape|A5 Portrait|B5|Letter|Executive|CD [Maximum] Select an area to scan based on well-known media sizes. -l 0..215.9mm [0] Top-left x position of scan area. -t 0..297.18mm [0] Top-left y position of scan area. -x 0..215.9mm [215.9] Width of scan-area. -y 0..297.18mm [297.18] Height of scan-area. --quick-format Maximum|A4|A5 Landscape|A5 Portrait|B5|Letter|Executive|CD [Maximum] Select an area to scan based on well-known media sizes. (DEPRECATED) Optional equipment: --source Flatbed|Transparency Unit [Flatbed] Selects the scan source (such as a document-feeder). --auto-eject[=(yes|no)] [inactive] Eject document after scanning --film-type Positive Film|Negative Film [inactive] --focus-position Focus on glass|Focus 2.5mm above glass [inactive] Sets the focus position to either the glass or 2.5mm above the glass --bay 1 | 2 | 3 | 4 | 5 | 6 [inactive] Select bay to scan --eject [inactive] Eject the sheet in the ADF --adf-mode Simplex|Duplex [inactive] Selects the ADF mode (simplex/duplex) --detect-doc-size[=(yes|no)] [inactive] Activates document size auto-detection. The scan area will be set to match the detected document size. --scan-area-is-valid[=(yes|no)] [yes] [read-only] Indicates whether the current scan area settings are valid. --adf-auto-scan[=(yes|no)] [inactive] Skips per sheet device setup for faster throughput. --double-feed-detection-sensitivity None|Low|High [inactive] Sets the sensitivity with which multi-sheet page feeds are detected and reported as errors. --ext-sane-status 0..2 [0] [read-only] Ugly kludge to provide additional status message strings to a frontend. --adf-duplex-direction-matches[=(yes|no)] [inactive] Indicates whether the device's ADF duplex mode, if available, scans in the same direction for the front and back. --deskew[=(yes|no)] [inactive] Rotate image so it appears upright. --autocrop[=(yes|no)] [inactive] Determines empty margins in the scanned image and removes them. This normally reduces the image to the size of the original document but may remove more. --calibrate [inactive] Performs color matching to make sure that the document's color tones are scanned correctly. --clean [inactive] Cleans the scanners reading section. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 58 |
Scan als Film_not Dia |
Supporter, Wikiteam
Anmeldungsdatum: Beiträge: 8564 |
Hallo Richyfor Das ist die Antworte bei meinem V330. mate-hp@matehp-HP:~$ scanimage -L device `epkowa:interpreter:003:010' is a Epson Perfection V330 Photo flatbed scanner mate-hp@matehp-HP:~$ Deine ist ja: dick@Dundee:~$ scanimage -L device `epkowa:interpreter:003:002' is a Epson (unknown model) flatbed scanner Was steht den genau auf der Unterseite? Mit diesem Befehl am 8. November 2021 16:10 wurde schon mal mehr erkannt: sudo sane-find-scanner -q found USB scanner (vendor=0x04b8 [EPSON], product=0x0142 [EPSON Perfection V33/V330]) at libusb:003:005 Bei mir ist das ausführlicher: mate-hp@matehp-HP:~$ sudo sane-find-scanner -q [sudo] Passwort für mate-hp: found USB scanner (vendor=0x0b05 [Broadcom Corp], product=0x17cb [BCM20702A0]) at libusb:003:005 could not fetch string descriptor: Pipe error could not fetch string descriptor: Pipe error found USB scanner (vendor=0x04b8 [EPSON], product=0x0142 [EPSON Perfection V33/V330]) at libusb:003:010 mate-hp@matehp-HP:~$ Woher kommt das Delta oder was wurde geändert, vllt hat Kellerkind_2009 (Moin Stephan) eine Idee. Ich wollte nur meine Beobachtung mitteilen. Nachtrag: Die |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Moin Werner 😉 Ich weiß nicht was da so alles falsch gemacht wurde! Richyfor zeige mal grep 0142 /usr/lib/udev/rules.d/60-iscan.rules |
(Themenstarter)
Anmeldungsdatum: Beiträge: 58 |
EPSON Perfektion V30 , V33, V300 Foto, V330 Foto (Warum kann ich keinen Fotos /Anhänge hochladen? Manchmal geht’s , manchmal nicht. Anhänge: Anlage: EPSON_V330 Photo Spezifika_173520.jpg Dieses Feld ist zwingend erforderlich. Umbenennen zu: Beschreibung Überschreibe Anhänge mit dem gleichen Namen.) 4,8 MiB (5.039.477 Bytes) iscan-data, Image Scan! for Linux data files Version 1.39.2-1 (Datum finde ich nicht) dick@Dundee:~$ grep 0142 /usr/lib/udev/rules.d/60-iscan.rules ATTRS{idProduct}=="0142", ENV{iscan_driver}="esci" |
Anmeldungsdatum: Beiträge: 9563 |
Auf dem Typschild des Scanners - das ist 1 Modell und nicht 4. Vermutlich steht das irgendwo auf der Durchlichteinheit, die für eben diese Modelle gedacht ist.
Maximale Dateigröße und maximale Auflösung beachten und "Anhang hochladen" klicken! |