Nabend zusammen,
das Kameramodul der interne Kamera meines Schlepptops (Lenovo E545) ist defekt. Abhilfe sollte eine externe USB-Kamera inkl. Mikrophon (Hama Webcam Spy Protect / HD720p 30fps) schaffen. Die wird erkannt. lsusb ergibt u.a.:
Bus 007 Device 002: ID 0c45:6341 Microdia Defender G-Lens 2577 HD720p Camera
Unter https://www.ideasonboard.org/uvc/#devices ist jedoch die ID nicht aufgeführt und der UVC-Treiber wird wohl nicht funktionieren. Der Befehl dmesg ergibt u.a.:
[ 966.752483] usb 5-2: USB disconnect, device number 3 [ 1067.313326] usb 5-2: new high-speed USB device number 4 using xhci_hcd [ 1067.558263] usb 5-2: New USB device found, idVendor=0c45, idProduct=6341, bcdDevice= 0.00 [ 1067.558268] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 1067.558271] usb 5-2: Product: HD 720P Webcam [ 1067.558274] usb 5-2: Manufacturer: HD 720P Webcam [ 1067.558276] usb 5-2: SerialNumber: 20130901 [ 1067.565553] uvcvideo: Found UVC 1.00 device HD 720P Webcam (0c45:6341) [ 1067.593338] input: HD 720P Webcam: HD 720P Webcam as /devices/pci0000:00/0000:00:10.0/usb5/5-2/5-2:1.0/input/input13 [ 1067.609508] usb 5-2: 3:1: cannot get freq at ep 0x84 [ 1067.779893] usb 5-2: 3:1: cannot get freq at ep 0x84 [ 1067.821259] usb 5-2: 3:1: cannot get freq at ep 0x84 [ 2161.697019] r8169 0000:01:00.0 enp1s0: Link is Down [ 3151.744265] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 3244.619711] audit: type=1400 audit(1625506930.823:86): apparmor="DENIED" operation="capable" profile="/snap/snapd/12398/usr/lib/snapd/snap-confine" pid=3240 comm="snap-confine" capability=4 capname="fsetid"
Der hervorgehobene Text war rot markiert. Meine Frage ist nun, welcher Treiber käme sonst in Frage, oder muß noch diese Bibliothekseinbindung für V4L stattfinden?
Danke und Gruß in die Runde