Hallo zusammen,
ich benötige Hilfe. Habe mir einen WLAN-USB-Stick von blumax zugelegt weil versprochen wurde, er liefe unter Linux. Nicht versprochen wurde, dass es so einfach sei, dass auch Anfänger wie ich klarkommen...
Gesagt sei noch dass ich erst sehr kurz Linux-Anwender bin (Ubuntu 10.10) und mich noch reichlich schwer tue insbesondere was die Konsolenarbeit betrifft. Außerdem ist es vielleicht gut zu wissen, dass ich mit dem betreffenden Rechner momentan via Kabel online bin und ausserdem einen zweiten PC (notebook) habe, der via WLAN online ist (aber nicht mittels Ralink). Na-ja, und gelesen habe ich hier natürlich auch schon einiges - und ausprobiert auch. Vermultlich aber zu unsystematisch. Offensichtlich habe ich den Treiber rt3390ats installiert, aber nicht überreden können, auch irgendetwas sinnvolles zu tun.
Hier nun die notwendigen Information (so gut ich kann):
1. Aufbau des Netzwerks
- Geräte: Shuttle Baerbone XPC SN68SG2 (mit AMD Athlon64 X2) / WLAN-USB-Dongle v. blumax '9009' / Router Linksys Wireless-G - da das notebook online ist, ist schon ab dem Router offensichtlich alles ok
2. Systemversionen
- Chipsatz der Netzwerkkarte: gem. Ubuntu: nVidia Corporation MCP67 Ethernet (rev a2) - Kernel: 2.6.35-22-generic - lspci -nn:
00:00.0 RAM memory [0500]: nVidia Corporation MCP67 Memory Controller [10de:0547] (rev a2) 00:01.0 ISA bridge [0601]: nVidia Corporation MCP67 ISA Bridge [10de:0548] (rev a2) 00:01.1 SMBus [0c05]: nVidia Corporation MCP67 SMBus [10de:0542] (rev a2) 00:01.2 RAM memory [0500]: nVidia Corporation MCP67 Memory Controller [10de:0541] (rev a2) 00:02.0 USB Controller [0c03]: nVidia Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2) 00:02.1 USB Controller [0c03]: nVidia Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2) 00:04.0 USB Controller [0c03]: nVidia Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2) 00:04.1 USB Controller [0c03]: nVidia Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2) 00:06.0 IDE interface [0101]: nVidia Corporation MCP67 IDE Controller [10de:0560] (rev a1) 00:07.0 Audio device [0403]: nVidia Corporation MCP67 High Definition Audio [10de:055c] (rev a1) 00:08.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Bridge [10de:0561] (rev a2) 00:09.0 IDE interface [0101]: nVidia Corporation MCP67 AHCI Controller [10de:0550] (rev a2) 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP67 Ethernet [10de:054c] (rev a2) 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0562] (rev a2) 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:0e.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:10.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:11.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:12.0 VGA compatible controller [0300]: nVidia Corporation C68 [GeForce 7025 / nForce 630a] [10de:053e] (rev a2) 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] 01:08.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023]
- lspci -nnk | grep -i net -A2
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP67 Ethernet [10de:054c] (rev a2) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3114] Kernel driver in use: forcedeth
- pccardctl info
''keine Ausgabe''
- lsusb
Bus 004 Device 002: ID 1241:1603 Belkin Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0458:002e KYE Systems Corp. (Mouse Systems) Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
3. Netzwerkkonfiguration
- network interfaces
auto lo iface lo inet loopback
- resolv conf
nameserver 62.109.123.7 nameserver 213.191.92.86
- hosts
192.168.1.100 lin2 # Added by NetworkManager 127.0.0.1 localhost.localdomain localhost ::1 lin2 localhost6.localdomain6 localhost6 127.0.1.1 lin2 ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters
- Schnittstellenzuordnung
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:30:1b:bc:4d:54", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
- ifconfig
eth0 Link encap:Ethernet Hardware Adresse 00:30:1b:bc:4d:54 inet Adresse:192.168.1.100 Bcast:192.168.1.255 Maske:255.255.255.0 inet6-Adresse: fe80::230:1bff:febc:4d54/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX packets:9421 errors:0 dropped:0 overruns:0 frame:0 TX packets:9453 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:6619683 (6.6 MB) TX bytes:1632588 (1.6 MB) Interrupt:47 Basisadresse:0x4000 lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:16436 Metrik:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B)
- route
Kernel-IP-Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
- iwconfig
lo no wireless extensions. eth0 no wireless extensions.
4. Pings
waren ok (wenn ich das richtig sehe, war das wegen der Kabelverbindung auch klar, nicht!?)
1. Weitere Infos zu WLAN-Karten
- iwlist chan
lo no wireless extensions. eth0 no wireless extensions.
- iwlist scan
lo no wireless extensions. eth0 no wireless extensions.
- rfkill: habe nicht verstanden, wie ich das Netz markieren könnte.
2. geladene Kerneltreiber
- lsmod
Module Size Used by nls_iso8859_1 3261 0 nls_cp437 4931 0 vfat 9201 0 fat 48240 1 vfat usb_storage 40172 0 rt3390sta 896830 0 snd_hda_codec_realtek 217980 1 binfmt_misc 6599 1 snd_hda_intel 22107 2 snd_hda_codec 87552 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5040 1 snd_hda_codec snd_pcm 71475 2 snd_hda_intel,snd_hda_codec snd_seq_midi 4588 0 nouveau 516971 2 snd_rawmidi 17783 1 snd_seq_midi snd_seq_midi_event 6047 1 snd_seq_midi ttm 56633 1 nouveau snd_seq 47174 2 snd_seq_midi,snd_seq_midi_event drm_kms_helper 30200 1 nouveau snd_timer 19067 2 snd_pcm,snd_seq snd_seq_device 5744 3 snd_seq_midi,snd_rawmidi,snd_seq ppdev 5556 0 drm 168054 4 nouveau,ttm,drm_kms_helper parport_pc 26058 1 snd 49006 13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 880 1 snd psmouse 59033 0 k8temp 3132 0 snd_page_alloc 7120 2 snd_hda_intel,snd_pcm serio_raw 4022 0 i2c_nforce2 5179 0 agpgart 32011 2 ttm,drm i2c_algo_bit 5168 1 nouveau lp 7342 0 parport 31492 3 ppdev,parport_pc,lp usbhid 36882 0 hid 67742 1 usbhid firewire_ohci 21106 0 floppy 54311 0 firewire_core 46643 1 firewire_ohci crc_itu_t 1383 1 firewire_core ahci 19013 0 libahci 21667 3 ahci pata_amd 8746 0 forcedeth 49433 0
3. erweiterte Fehlermeldungen
- dmesg (boar, bin ich froh, dass man Befehle ins Terminalfenster hineinkopieren kann...😉 )
[ 0.000000] Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010 (Ubuntu 2.6.35-22.35-generic 2.6.35.4) [ 0.004287] Initializing cgroup subsys net_cls [ 0.166948] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.258441] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.MBIO._CRS] (Node f701bfc0), AE_NOT_FOUND [ 0.298139] pci 0000:00:0f.0: PCI bridge to [bus 06-06] [ 0.330162] audit: initializing netlink socket (disabled) [ 0.348173] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.348180] ACPI: Thermal Zone [THRM] (40 C) [ 0.351287] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.539251] device-mapper: multipath: version 1.1.1 loaded [ 0.539254] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.776939] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.797835] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 0.797843] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.316729] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 19, addr 00:30:1b:bc:4d:54 [ 1.316733] forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3 [ 1.536973] ata2: port disabled. ignoring. [ 11.366836] Adding 6142972k swap on /dev/sda5. Priority:-1 extents:1 across:6142972k [ 12.306776] forcedeth 0000:00:0a.0: irq 47 for MSI/MSI-X [ 23.272012] eth0: no IPv6 routers present
4. Konfiguration des NM
- NM state
[main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true
- NM-settings
[main] plugins=ifupdown,keyfile no-auto-default=00:30:1b:bc:4d:54, [ifupdown] managed=false
Mein Gott, dass Ihr mit diesem Kram 'was anfangen könnt! Jetzt schon mal großen Dank!!!
Valentin