ubuntuusers.de

Hallo Leute, ich hab seit kurzem Ubuntu 9.10 bei mir auf meinem Rechner installiert, bin also echt noch blutiger Anfänger. Das System läuft mit dieser Version auch ganz stabil und alles ist so weit klasse. Probleme traten bis jetzt nur mit meiner externen Festplatte von Seagate 500GB auf. Nach etwa 1 Minute ist sie nicht mehr auf dem Desktop zu finden und es kann kein Datentransfer mehr erfolgen... Könnt ihr mir bitte helfen?, das wäre echt klasse, denn meine gesamte Musik befindet sich dort drauf. USB-Sticks gehen problemlos ran und bleiben auch aktiv, und kapseln sich nicht wie die Externe von alleine ab. MfG FanFel

Hi

Wird die HDD ggf. schnell sehr heiß - also, schaltet sich das Teil ggf. selbstständig ab? sonst, ruf mal im Terminal (Anwendungen-Zubehör-Terminal) folgende Befehle ein:

lsusb
-- zeigt die Geräte am USB an (gibt auch noch lspci und so'n Kram ;))

sudo blkid
-- Du mußt hier Dein User-PW eingeben (sudo = SuperUser do *Befehl*), der Befehl wird quasi mit Admin-Rechten ausgeführt (sparsam benutzen !!)
-- zeigt 'gefundene' und eingebundene Medien an - ggf. wenn die Platte noch 'da' ist, und, wenn sie verschwunden ist

- Auch könntest Du versuchen, folgenden Befehl vom Einstecken bis zum Abschmieren der Platte auszuführen
- beenden mit STRG-C
tail -f /var/log/messages

- Befürchte aber, daß dort 'ne Menge' an Info's auflaufen, habe das bisher auch nur für USB-Probleme benutzt, da hier (auch ?) die USB-Geräte erkannt und (irgendwie) eingebunden werden.
- Ubuntu-Guru's können darin was erkennen ;) *hoff*

Leider kann ich Dir nicht direkt helfen, aber vll. kommt ein Ubuntu-Guru dadurch auf eine Lösung für Dein Problem?

MfG

Hi posti, ne, also heiß wird die auf keinen Fall. Vielleicht nach 5 Stunden Dauereinsatz,aber noch nicht nach der Minute die sie immer ungefähr bei mir nur läuft... Das Terminal hab ich schon aufgerufen und die Befehle mal durchgegeben. Wenn sie dann an ist,wird sie auch angezeigt,aber das Problem beseitigt man dadurch doch nicht, oder?, denn sie schaltet sich immer noch nach kurzer Zeit wieder aus. Ist das vieleicht ein Problem das sie noch ntfs-windows-format hat? Linux arbeitet doch mit etwas anderem oder?

Hi

Nein, diese Befehle lesen nur, was Sache ist. Diese Informationen kannst Du im Terminal kopieren (rechte Maus + Kopieren ... STRG+C klappt da nicht) und hier im Forum in einem CODE-Block einfügen. Das Passwort wird ja nicht angezeigt (auch im Terminal nicht).

Weiß auch noch nicht, was Deine Platte da mit Dir macht - aber externe NTFS-Platten sind (ok, bei mir WAREN) kein Problem - habe momentan was ähnliches, die USB-Datenträger erscheinen einfach nicht mehr auf dem Desktop (man kann die Geräte aber händisch mounten). Die oben vorgeschlagene Befehle wurden mir ebenfalls auch nur vorgegeben - kannst auch mal dort reinschaun: http://forum.ubuntuusers.de/topic/usb-stick-erscheint-nicht-auf-desktop Dort ist auch ersichtlich, wie man eine vorhandene aber nicht eingebundene Partition einbinden kann - falls bei Dir das Mounten irgendwie rückgängig gemacht wird.

MfG

so erstmal danke für die Antwort...

felix@fefe:~$ sudo lsusb
Bus 001 Device 004: ID 05e3:0760 Genesys Logic, Inc. USB 2.0 Card Reader/Writer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 1267:0103 Logic3 / SpectraVideo plc G-720 Keyboard
Bus 002 Device 002: ID 1532:0002 Razer USA, Ltd 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

also nachdem die externe festplatte sich wieder abgeklinkt hat ist sie natürlich ja auch nicht mehr mit sudo lsusb einzusehen,aber wie mach ich das denn mit dem mounten?

felix@fefe:~$ sudo mount
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/felix/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=felix)
felix@fefe:~$ ^C
felix@fefe:~$ 

Hi

Sieht nicht danach aus, daß dort ne Festplatte am USB-Bus hängt noch, daß eine nicht eingebundene Platte erkannt wurde. Bei den Befehlen im Terminal NUR WENN NÖTIG das 'sudo' benutzen! Mit sudo erstellte Dateien (sollen) danach nur noch von 'sudo' verwaltet werden können. Was ohne 'sudo' klappt, ohne sudo ausführen.

posti@posti-ubuntu:~$ lsusb
Bus 002 Device 003: ID 0d7e:2517 American Computer & Digital Components Hi-Speed Mass Storage Device
Bus 002 Device 002: ID 0d7e:2515 American Computer & Digital Components 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
posti@posti-ubuntu:~$ sudo blkid
[sudo] password for posti: 
/dev/sda1: UUID="7e0334b9-3373-4f07-bea2-e602d9021c96" TYPE="ext4" 
/dev/sda5: UUID="9cdb30b1-d8b6-44fe-89f3-405e566924b3" TYPE="swap" 
/dev/sdb1: SEC_TYPE="msdos" LABEL="SD-CARD" UUID="FC30-3DA9" TYPE="vfat" 
/dev/sdf: LABEL="E6" UUID="4489-C00F" TYPE="vfat" 

Direkt die erste beiden Ausgabeb bei lsusb sind mein USB-Stick (warum 2 - kA). Bei blkid siehst Du, daß sda1 (meine System-Platte) und sda5 (die Swap-Partition) erkannt sind (sind auch gemountet - System läuft ja gerade). Die anderen beiden Garäte sdb1 (SD-Card) und sdf (USB-Stick) sind erkannt, aber nicht automatisch eingebunden.

Bei Dir vermisse ich die Swap-Partition, oder? AAH - Du hast 'mount' anzeigen lassen - da steht bei mir auch kein Swap drin ☺

Jetzt wäre mal ein Ubuntu-Guru recht 😉

MfG

ja aber wo sind die ganzen Ubuntu-Könige? Ich könnte echt einen tollen Rat gebrauchen

Hei, zuerst was wichtiges: Steckt Deine externe Festplatte direkt an USB oder an einem HUB? Sie muss (99%)direkt dran. Desweiteren testet man so: dranstecken...warten...in Terminal eingeben dmesg Gruß

jo danke addi72, also ich hab sie mal angeschlossen und das dann ins Terminal eingegeben und gewartet und mir ist aufgefallen,dass wenn ich sie nicht benutze oder darauf zugreife,sie auch nicht ausgeht...aber sobald ich von ihr wieder Musik abspielen will,geht sie aus und auf dem Medium kann nicht zugegriffen werden...

[    0.188720] pci 0000:02:03.0: supports D2
[    0.188723] pci 0000:02:03.0: PME# supported from D2 D3hot D3cold
[    0.188729] pci 0000:02:03.0: PME# disabled
[    0.188773] pci 0000:02:06.0: reg 10 io port: [0xc400-0xc4ff]
[    0.188783] pci 0000:02:06.0: reg 14 32bit mmio: [0xfeaef800-0xfeaef8ff]
[    0.188833] pci 0000:02:06.0: supports D1 D2
[    0.188836] pci 0000:02:06.0: PME# supported from D1 D2 D3hot D3cold
[    0.188842] pci 0000:02:06.0: PME# disabled
[    0.188887] pci 0000:00:1e.0: transparent bridge
[    0.188893] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[    0.188899] pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    0.188921] pci_bus 0000:00: on NUMA node 0
[    0.188927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.189093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.189147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.189331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.198150] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.198283] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.198414] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.198545] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.198676] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.198810] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.198942] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.199076] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.199316] SCSI subsystem initialized
[    0.199356] libata version 3.00 loaded.
[    0.199356] usbcore: registered new interface driver usbfs
[    0.199356] usbcore: registered new interface driver hub
[    0.199356] usbcore: registered new device driver usb
[    0.199356] ACPI: WMI: Mapper loaded
[    0.199356] PCI: Using ACPI for IRQ routing
[    0.208013] Bluetooth: Core ver 2.15
[    0.208035] NET: Registered protocol family 31
[    0.208035] Bluetooth: HCI device and connection manager initialized
[    0.208035] Bluetooth: HCI socket layer initialized
[    0.208035] NetLabel: Initializing
[    0.208035] NetLabel:  domain hash size = 128
[    0.208035] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.208052] NetLabel:  unlabeled traffic allowed by default
[    0.208170] hpet clockevent registered
[    0.208174] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.208180] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.208188] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.224013] pnp: PnP ACPI init
[    0.224035] ACPI: bus type pnp registered
[    0.228872] pnp: PnP ACPI: found 16 devices
[    0.228876] ACPI: ACPI bus type pnp unregistered
[    0.228881] PnPBIOS: Disabled by ACPI PNP
[    0.228897] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[    0.228909] system 00:08: ioport range 0x680-0x6ff has been reserved
[    0.228913] system 00:08: ioport range 0x295-0x296 has been reserved
[    0.228921] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[    0.228925] system 00:09: ioport range 0x800-0x87f has been reserved
[    0.228929] system 00:09: ioport range 0x480-0x4bf has been reserved
[    0.228933] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.228937] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.228945] system 00:0b: iomem range 0xffc00000-0xfff7ffff has been reserved
[    0.228953] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.228957] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.228965] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[    0.228973] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[    0.228981] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[    0.228985] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[    0.228989] system 00:0f: iomem range 0x100000-0x3fffffff could not be reserved
[    0.263698] AppArmor: AppArmor Filesystem Enabled
[    0.263744] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.263749] pci 0000:00:01.0:   IO window: 0xb000-0xbfff
[    0.263754] pci 0000:00:01.0:   MEM window: 0xfa900000-0xfe9fffff
[    0.263759] pci 0000:00:01.0:   PREFETCH window: 0xbfe00000-0xdfefffff
[    0.263764] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[    0.263767] pci 0000:00:1c.0:   IO window: disabled
[    0.263772] pci 0000:00:1c.0:   MEM window: disabled
[    0.263777] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.263783] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.263787] pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
[    0.263793] pci 0000:00:1e.0:   MEM window: 0xfea00000-0xfeafffff
[    0.263797] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.263810]   alloc irq_desc for 16 on node -1
[    0.263813]   alloc kstat_irqs on node -1
[    0.263820] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.263826] pci 0000:00:01.0: setting latency timer to 64
[    0.263837] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.263843] pci 0000:00:1c.0: setting latency timer to 64
[    0.263852] pci 0000:00:1e.0: setting latency timer to 64
[    0.263859] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.263864] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.263867] pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
[    0.263870] pci_bus 0000:01: resource 1 mem: [0xfa900000-0xfe9fffff]
[    0.263873] pci_bus 0000:01: resource 2 pref mem [0xbfe00000-0xdfefffff]
[    0.263877] pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
[    0.263880] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.263883] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.263886] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.263936] NET: Registered protocol family 2
[    0.264081] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.264501] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.265004] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.265312] TCP: Hash tables configured (established 131072 bind 65536)
[    0.265316] TCP reno registered
[    0.265441] NET: Registered protocol family 1
[    0.265527] Trying to unpack rootfs image as initramfs...
[    0.499035] Freeing initrd memory: 7471k freed
[    0.503394] cpufreq-nforce2: No nForce2 chipset.
[    0.503433] Scanning for low memory corruption every 60 seconds
[    0.503554] audit: initializing netlink socket (disabled)
[    0.503572] type=2000 audit(1276199540.499:1): initialized
[    0.512651] highmem bounce pool size: 64 pages
[    0.512658] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.514525] VFS: Disk quotas dquot_6.5.2
[    0.514607] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.515338] fuse init (API version 7.12)
[    0.515452] msgmni has been set to 1731
[    0.515738] alg: No test for stdrng (krng)
[    0.515760] io scheduler noop registered
[    0.515764] io scheduler anticipatory registered
[    0.515766] io scheduler deadline registered
[    0.515828] io scheduler cfq registered (default)
[    0.515939] pci 0000:01:00.0: Boot video device
[    0.516103]   alloc irq_desc for 24 on node -1
[    0.516107]   alloc kstat_irqs on node -1
[    0.516118] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.516126] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.516257]   alloc irq_desc for 25 on node -1
[    0.516260]   alloc kstat_irqs on node -1
[    0.516270] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.516280] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.516401] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.516479] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.516641] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.516645] ACPI: Power Button [PWRF]
[    0.516719] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.516726] ACPI: Power Button [PWRB]
[    0.517188] processor LNXCPU:00: registered as cooling_device0
[    0.517193] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.517337] processor LNXCPU:01: registered as cooling_device1
[    0.520927] isapnp: Scanning for PnP cards...
[    0.708951] Switched to high resolution mode on CPU 1
[    0.711947] Switched to high resolution mode on CPU 0
[    0.874159] isapnp: No Plug & Play device found
[    0.875650] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.875771] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.876159] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.877650] brd: module loaded
[    0.878266] loop: module loaded
[    0.878361] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.878499] ata_piix 0000:00:1f.1: version 2.13
[    0.878516]   alloc irq_desc for 18 on node -1
[    0.878519]   alloc kstat_irqs on node -1
[    0.878527] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.878573] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.878673] scsi0 : ata_piix
[    0.878787] scsi1 : ata_piix
[    0.880591] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.880596] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.880623]   alloc irq_desc for 19 on node -1
[    0.880626]   alloc kstat_irqs on node -1
[    0.880632] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.880639] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.880684] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.880963] scsi2 : ata_piix
[    0.881054] scsi3 : ata_piix
[    0.881108] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
[    0.881112] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
[    0.882330] Fixed MDIO Bus: probed
[    0.882380] PPP generic driver version 2.4.2
[    0.882509] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.882533]   alloc irq_desc for 23 on node -1
[    0.882536]   alloc kstat_irqs on node -1
[    0.882544] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.882561] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.882566] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.882606] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.886504] ehci_hcd 0000:00:1d.7: debug port 1
[    0.886512] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[    0.886527] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00
[    0.900011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.900118] usb usb1: configuration #1 chosen from 1 choice
[    0.900158] hub 1-0:1.0: USB hub found
[    0.900169] hub 1-0:1.0: 8 ports detected
[    0.900252] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.900275] uhci_hcd: USB Universal Host Controller Interface driver
[    0.900309] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.900317] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.900322] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.900369] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.900394] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
[    0.900496] usb usb2: configuration #1 chosen from 1 choice
[    0.900532] hub 2-0:1.0: USB hub found
[    0.900542] hub 2-0:1.0: 2 ports detected
[    0.900600] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.900607] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.900611] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.900652] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.900677] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[    0.900775] usb usb3: configuration #1 chosen from 1 choice
[    0.900811] hub 3-0:1.0: USB hub found
[    0.900820] hub 3-0:1.0: 2 ports detected
[    0.900877] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.900884] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.900888] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.900929] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.900963] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00
[    0.901067] usb usb4: configuration #1 chosen from 1 choice
[    0.901102] hub 4-0:1.0: USB hub found
[    0.901112] hub 4-0:1.0: 2 ports detected
[    0.901172] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.901180] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.901184] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.901222] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.901255] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[    0.901356] usb usb5: configuration #1 chosen from 1 choice
[    0.901391] hub 5-0:1.0: USB hub found
[    0.901400] hub 5-0:1.0: 2 ports detected
[    0.901541] PNP: No PS/2 controller found. Probing ports directly.
[    0.903706] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.903715] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.903826] mice: PS/2 mouse device common for all mice
[    0.903956] rtc_cmos 00:03: RTC can wake from S4
[    0.904010] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.904038] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.904181] device-mapper: uevent: version 1.0.3
[    0.904299] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.904404] device-mapper: multipath: version 1.1.0 loaded
[    0.904408] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.904567] EISA: Probing bus 0 at eisa.0
[    0.904598] EISA: Detected 0 cards.
[    0.904722] cpuidle: using governor ladder
[    0.904727] cpuidle: using governor menu
[    0.905410] TCP cubic registered
[    0.905581] NET: Registered protocol family 10
[    0.906207] lo: Disabled Privacy Extensions
[    0.906709] NET: Registered protocol family 17
[    0.906735] Bluetooth: L2CAP ver 2.13
[    0.906738] Bluetooth: L2CAP socket layer initialized
[    0.906743] Bluetooth: SCO (Voice Link) ver 0.6
[    0.906745] Bluetooth: SCO socket layer initialized
[    0.906784] Bluetooth: RFCOMM TTY layer initialized
[    0.906788] Bluetooth: RFCOMM socket layer initialized
[    0.906791] Bluetooth: RFCOMM ver 1.11
[    0.906833] Using IPI No-Shortcut mode
[    0.906919] PM: Resume from disk failed.
[    0.906935] registered taskstats version 1
[    0.907064]   Magic number: 14:106:900
[    0.907100] acpi PNP0501:00: hash matches
[    0.907135] rtc_cmos 00:03: setting system clock to 2010-06-10 19:52:21 UTC (1276199541)
[    0.907139] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.907141] EDD information not available.
[    1.043456] ata1.00: ATAPI: _NEC DVD_RW ND-2510A, 2.96, max UDMA/33
[    1.051225] ata1.00: configured for UDMA/33
[    1.057542] ata3.00: ATA-6: WDC WD2000JD-55HBB0, 08.02D08, max UDMA/133
[    1.057547] ata3.00: 390721968 sectors, multi 16: LBA48 
[    1.057830] scsi 0:0:0:0: CD-ROM            _NEC     DVD_RW ND-2510A  2.96 PQ: 0 ANSI: 5
[    1.073556] ata3.00: configured for UDMA/133
[    1.074184] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[    1.074188] Uniform CD-ROM driver Revision: 3.20
[    1.074302] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.074370] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.074501] scsi 2:0:0:0: Direct-Access     ATA      WDC WD2000JD-55H 08.0 PQ: 0 ANSI: 5
[    1.074671] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[    1.074685] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.074761] sd 2:0:0:0: [sda] Write Protect is off
[    1.074766] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.074803] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.074981]  sda: sda1 sda2 < sda5 >
[    1.101606] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.101629] Freeing unused kernel memory: 544k freed
[    1.102046] Write protecting the kernel text: 4584k
[    1.102104] Write protecting the kernel read-only data: 1844k
[    1.277461] Linux agpgart interface v0.103
[    1.317785] Floppy drive(s): fd0 is 1.44M
[    1.348376] usb 1-8: new high speed USB device using ehci_hcd and address 4
[    1.379048] FDC 0 is a post-1991 82077
[    1.426302] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.426349] 8139cp 0000:02:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.432602] 8139too Fast Ethernet driver 0.9.28
[    1.432676]   alloc irq_desc for 21 on node -1
[    1.432681]   alloc kstat_irqs on node -1
[    1.432693] 8139too 0000:02:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.434740] eth0: RealTek RTL8139 at 0xc400, 00:11:09:29:72:83, IRQ 21
[    1.439186] ohci1394 0000:02:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.495009] usb 1-8: configuration #1 chosen from 1 choice
[    1.495031] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[feaef000-feaef7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    1.510276] Initializing USB Mass Storage driver...
[    1.510462] scsi4 : SCSI emulation for USB Mass Storage devices
[    1.510624] usbcore: registered new interface driver usb-storage
[    1.510630] USB Mass Storage support registered.
[    1.510832] usb-storage: device found at 4
[    1.510836] usb-storage: waiting for device to settle before scanning
[    1.736026] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    1.918750] usb 2-1: configuration #1 chosen from 1 choice
[    1.961507] usbcore: registered new interface driver hiddev
[    1.977608] input: Razer Razer Diamondback Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[    1.977725] generic-usb 0003:1532:0002.0001: input,hidraw0: USB HID v1.10 Mouse [Razer Razer Diamondback Optical Mouse] on usb-0000:00:1d.0-1/input0
[    1.977749] usbcore: registered new interface driver usbhid
[    1.977753] usbhid: v2.6:USB HID core driver
[    2.172063] usb 2-2: new low speed USB device using uhci_hcd and address 3
[    2.338430] usb 2-2: configuration #1 chosen from 1 choice
[    2.354769] input: HID 1267:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
[    2.354867] generic-usb 0003:1267:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1d.0-2/input0
[    2.363862] PM: Starting manual resume from disk
[    2.363868] PM: Resume from partition 8:5
[    2.363870] PM: Checking hibernation image.
[    2.364038] PM: Resume from disk failed.
[    2.370393] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.370400] EXT4-fs (sda1): write access will be enabled during recovery
[    2.373041] EXT4-fs (sda1): barriers enabled
[    2.378412] input: HID 1267:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input5
[    2.378503] generic-usb 0003:1267:0103.0003: input,hidraw2: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1d.0-2/input1
[    2.780161] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc000067400c]
[    5.264775] kjournald2 starting: pid 351, dev sda1:8, commit interval 5 seconds
[    5.264864] EXT4-fs (sda1): delayed allocation enabled
[    5.264870] EXT4-fs: file extents enabled
[    5.291626] EXT4-fs: mballoc enabled
[    5.291647] EXT4-fs (sda1): recovery complete
[    5.291938] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    5.846894] type=1505 audit(1276199546.436:2): operation="profile_load" pid=376 name=/usr/share/gdm/guest-session/Xsession
[    5.850073] type=1505 audit(1276199546.440:3): operation="profile_load" pid=377 name=/sbin/dhclient3
[    5.850807] type=1505 audit(1276199546.440:4): operation="profile_load" pid=377 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    5.851205] type=1505 audit(1276199546.440:5): operation="profile_load" pid=377 name=/usr/lib/connman/scripts/dhclient-script
[    5.883005] type=1505 audit(1276199546.472:6): operation="profile_load" pid=378 name=/usr/bin/evince
[    5.894978] type=1505 audit(1276199546.484:7): operation="profile_load" pid=378 name=/usr/bin/evince-previewer
[    5.901955] type=1505 audit(1276199546.492:8): operation="profile_load" pid=378 name=/usr/bin/evince-thumbnailer
[    5.923783] type=1505 audit(1276199546.512:9): operation="profile_load" pid=380 name=/usr/lib/cups/backend/cups-pdf
[    5.924649] type=1505 audit(1276199546.516:10): operation="profile_load" pid=380 name=/usr/sbin/cupsd
[    5.928046] type=1505 audit(1276199546.520:11): operation="profile_load" pid=381 name=/usr/sbin/tcpdump
[    6.508593] usb-storage: device scan complete
[    6.509658] scsi 4:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0125 PQ: 0 ANSI: 0
[    6.510777] scsi 4:0:0:1: Direct-Access     Generic  STORAGE DEVICE   0125 PQ: 0 ANSI: 0
[    6.511779] scsi 4:0:0:2: Direct-Access     Generic  STORAGE DEVICE   0125 PQ: 0 ANSI: 0
[    6.512778] scsi 4:0:0:3: Direct-Access     Generic  STORAGE DEVICE   0125 PQ: 0 ANSI: 0
[    6.513385] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    6.513509] sd 4:0:0:1: Attached scsi generic sg3 type 0
[    6.513626] sd 4:0:0:2: Attached scsi generic sg4 type 0
[    6.513749] sd 4:0:0:3: Attached scsi generic sg5 type 0
[    6.521142] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    6.522513] sd 4:0:0:3: [sde] Attached SCSI removable disk
[    6.523885] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[    6.525261] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[   15.914566] udev: starting version 147
[   15.943745] Adding 3004112k swap on /dev/sda5.  Priority:-1 extents:1 across:3004112k 
[   16.586605] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.694148] intel_rng: FWH not detected
[   16.772796] lp: driver loaded but no devices found
[   16.844677] EXT4-fs (sda1): internal journal on sda1:8
[   16.913739] Linux video capture interface: v2.00
[   17.067193] saa7130/34: v4l2 driver version 0.2.15 loaded
[   17.067268]   alloc irq_desc for 17 on node -1
[   17.067273]   alloc kstat_irqs on node -1
[   17.067285] saa7134 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   17.067296] saa7134[0]: found at 0000:02:01.0, rev: 1, irq: 17, latency: 64, mmio: 0xfeaefc00
[   17.067307] saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected]
[   17.067326] saa7134[0]: board init: gpio is c806000
[   17.067341] IRQ 17/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   17.100442] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   17.250487] saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
[   17.250514] saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
[   17.250539] saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
[   17.250562] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.250585] saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
[   17.250608] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.250631] saa7134[0]: i2c eeprom 60: 0c 22 17 44 02 8e ce 14 ff ff ff ff ff ff ff ff
[   17.250653] saa7134[0]: i2c eeprom 70: 00 30 8d 14 34 25 ff ff ff ff ff ff ff ff ff ff
[   17.250676] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.250698] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.250721] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.250744] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.250767] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.250789] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.250812] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.250834] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   17.250859] i2c-adapter i2c-0: Invalid 7-bit address 0x7a
[   17.337497] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.337544] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   17.343845] type=1505 audit(1276199557.932:12): operation="profile_replace" pid=930 name=/usr/share/gdm/guest-session/Xsession
[   17.347122] type=1505 audit(1276199557.936:13): operation="profile_replace" pid=932 name=/sbin/dhclient3
[   17.347986] type=1505 audit(1276199557.936:14): operation="profile_replace" pid=932 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   17.348462] type=1505 audit(1276199557.940:15): operation="profile_replace" pid=932 name=/usr/lib/connman/scripts/dhclient-script
[   17.357214] type=1505 audit(1276199557.948:16): operation="profile_replace" pid=933 name=/usr/bin/evince
[   17.371125] type=1505 audit(1276199557.960:17): operation="profile_replace" pid=933 name=/usr/bin/evince-previewer
[   17.380221] type=1505 audit(1276199557.972:18): operation="profile_replace" pid=933 name=/usr/bin/evince-thumbnailer
[   17.398439] type=1505 audit(1276199557.988:19): operation="profile_replace" pid=947 name=/usr/lib/cups/backend/cups-pdf
[   17.399298] type=1505 audit(1276199557.988:20): operation="profile_replace" pid=947 name=/usr/sbin/cupsd
[   17.403658] type=1505 audit(1276199557.992:21): operation="profile_replace" pid=950 name=/usr/sbin/tcpdump
[   17.497494] tuner 0-0043: chip found @ 0x86 (saa7134[0])
[   17.540056] tda9887 0-0043: creating new instance
[   17.540063] tda9887 0-0043: tda988[5/6/7] found
[   17.608085] Chip ID is not zero. It is not a TEA5767
[   17.608285] tuner 0-0060: chip found @ 0xc0 (saa7134[0])
[   17.653479] mt20xx 0-0060: microtune: companycode=3cbf part=42 rev=2f
[   17.684285] mt20xx 0-0060: microtune MT2050 found, OK
[   17.759465] saa7134[0]: registered device video0 [v4l2]
[   17.759516] saa7134[0]: registered device vbi0
[   17.793449] saa7134 ALSA driver for DMA sound loaded
[   17.793470] IRQ 17/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   17.793516] saa7134[0]/alsa: saa7134[0] at 0xfeaefc00 irq 17 registered as card -2
[   17.918128] dvb_init() allocating 1 frontend
[   17.972082] DVB: registering new adapter (saa7134[0])
[   17.972091] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...
[   18.081848] ppdev: user-space parallel port driver
[   18.724468] CPU0 attaching NULL sched-domain.
[   18.724476] CPU1 attaching NULL sched-domain.
[   18.768069] CPU0 attaching sched-domain:
[   18.768075]  domain 0: span 0-1 level SIBLING
[   18.768080]   groups: 0 1
[   18.768086]   domain 1: span 0-1 level MC
[   18.768090]    groups: 0-1 (__cpu_power = 2048)
[   18.768098] CPU1 attaching sched-domain:
[   18.768101]  domain 0: span 0-1 level SIBLING
[   18.768105]   groups: 1 0
[   18.768112]   domain 1: span 0-1 level MC
[   18.768115]    groups: 0-1 (__cpu_power = 2048)
[   20.064482] CPU0 attaching NULL sched-domain.
[   20.064490] CPU1 attaching NULL sched-domain.
[   20.088072] CPU0 attaching sched-domain:
[   20.088078]  domain 0: span 0-1 level SIBLING
[   20.088082]   groups: 0 1
[   20.088090] CPU1 attaching sched-domain:
[   20.088093]  domain 0: span 0-1 level SIBLING
[   20.088097]   groups: 1 0
[   27.992029] eth0: no IPv6 routers present
[ 8835.176029] usb 1-4: new high speed USB device using ehci_hcd and address 5
[ 8835.566219] usb 1-4: configuration #1 chosen from 1 choice
[ 8835.630516] scsi5 : SCSI emulation for USB Mass Storage devices
[ 8835.633492] usb-storage: device found at 5
[ 8835.633497] usb-storage: waiting for device to settle before scanning
[ 8840.634252] usb-storage: device scan complete
[ 8840.637225] scsi 5:0:0:0: Direct-Access     Seagate  FreeAgent Pro    400A PQ: 0 ANSI: 4
[ 8840.637827] sd 5:0:0:0: Attached scsi generic sg6 type 0
[ 8840.645174] sd 5:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 8840.647965] sd 5:0:0:0: [sdf] Write Protect is off
[ 8840.647971] sd 5:0:0:0: [sdf] Mode Sense: 1c 00 00 00
[ 8840.647975] sd 5:0:0:0: [sdf] Assuming drive cache: write through
[ 8840.654951] sd 5:0:0:0: [sdf] Assuming drive cache: write through
[ 8840.654959]  sdf: sdf1
[ 8840.682471] sd 5:0:0:0: [sdf] Assuming drive cache: write through
[ 8840.682480] sd 5:0:0:0: [sdf] Attached SCSI disk
felix@fefe:~$ 

Genug Strom da? Ist die Festplatte mit Netzteil? Wenn nicht/oder defekt, mal alle anderen USB-Geräte abstöpseln.

ne genug strom ist da... und auf windows läuft sie tadellos