Auch alles i.O. Was für ein Headset ist das? Hat es einzelne Stecker für Mic/Ton?
Headset an Frontpanel wird nicht erkannt
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: Zähle... |
Das ist ein HyperX Cloud II mit einem Kombi-Klinkenstecker. Den hab ich in einen Y-Verteiler von UGreen gesteckt, der das dann auf Input und Output aufsplittet. Und nein, die USB Soundkarte von dem Headset ist keine Alternative, darunter leidet die Soundqualität zu sehr. ^^ Nur - wenn ich meine JBL Flip 3 per AUX vorne anschließe (sowohl direkt also auch mit Y-Verteiler) dann passiert da leider auch genau garnichts... Die Kombi-Klinke im Audioausgang vorne klappt auch nicht. Kann ich nicht einfach einen Eintrag anlegen, der auf das entsprechende Device + Subdevice zeigt? Also ich habe kein Plan wie das gehen würde, aber das könnte doch vielleicht funktionieren? 🙄 |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Demnach könntest du das Headset aber Hinten in der Asus einstecken.Dort Funktioniert das (ohne Y-Kabel) Mic und Lautsprecher – ist das Richtig? |
(Themenstarter)
Anmeldungsdatum: Beiträge: 16 |
Ja und Nein. Also ich könnte, klar. Aber dann muss ich jedes mal, wenn ich auf meinen Verstärker umschalten mag (und das ist durchaus mehrmals am Tag) unter den Schreibtisch kriechen. Und zudem ist das Headset Kabel viel zu kurz. Eine wirkliche Lösung ist das also auch nicht... Wie gesagt - es scheint ja an sich zu gehen, ich kann ja Daten an das Headset schicken, die es dann ausgibt. Und genauso wird das Headset ja vom PC erkannt. Kann man da nicht irgendwie eine Art virtuelles Gerät anlegen, welches auf das Device+Subdevice zeigt? |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Da bin ich mir nicht sicher. Ich baue mir dein System im Kopf ja gerade zusammen 😬 Ist immer schwierig wenn man nicht davor sitzt. Das Erkennen/Umschalten von Jack scheint nicht Stabil zu sein.Dann kann Pulse damit nicht Arbeiten. Hier fehlt eigentlich der Switch um auf den Ausgang umzuschalten node hw:0, #40 (0,0,0,Front Headphone Jack,0) VALUE node hw:0, #4 (2,0,0,Surround Playback Switch,0) VALUE node hw:0, #4 (2,0,0,Surround Playback Switch,0) VALUE node hw:0, #3 (2,0,0,Surround Playback Volume,0) VALUE node hw:0, #3 (2,0,0,Surround Playback Volume,0) VALUE node hw:0, #10 (2,0,0,Side Playback Switch,0) VALUE node hw:0, #10 (2,0,0,Side Playback Switch,0) VALUE node hw:0, #9 (2,0,0,Side Playback Volume,0) VALUE node hw:0, #9 (2,0,0,Side Playback Volume,0) VALUE node hw:0, #7 (2,0,0,Center Playback Switch,0) VALUE node hw:0, #5 (2,0,0,Center Playback Volume,0) VALUE node hw:0, #8 (2,0,0,LFE Playback Switch,0) VALUE node hw:0, #6 (2,0,0,LFE Playback Volume,0) VALUE node hw:0, #11 (2,0,0,Headphone Playback Switch,0) VALUE node hw:0, #11 (2,0,0,Headphone Playback Switch,0) VALUE node hw:0, #31 (2,0,0,Master Playback Volume,0) VALUE Wie ist der Stecker für das Frontpanel aufgebaut? Nur HDA oder hat er auch AC97? Zeige mal cat /var/lib/alsa/asound.state |
(Themenstarter)
Anmeldungsdatum: Beiträge: 16 |
Der Stecker ist ein normaler HDA Stecker. Der geht dann nochmal auf so ne kleine USB Soundkarte und kann optional auch per USB 2.0 ans Board gesteckt werden. Aber auch hier ist die Qualität ziemlich schlecht, sodass ich diese Soundkarte nicht wirklich als Lösung betrachte. 😐 Die asound.state Datei ist nicht vorhanden. Ich habe gesucht, ob sie aus irgendwelchen Gründen wo anders liegt, aber leider Fehlanzeige... Es gibt eine /run/lock/asound.state.lock - da steht "1118" drin... |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Hmm,wird nicht besser mit dem Spaziergang 😕 Die Datei ist eigentlich elementar(nach meinem Wissenstand),zeige mal systemctl status alsa-restore
dmesg | egrep -i "alsa|snd|hdmi" |
(Themenstarter)
Anmeldungsdatum: Beiträge: 16 |
Das hat ihn tatsächlich auch gestört. Ich habe die Datei mal angelegt und dann den Service neugestartet. Die Datei selbst ist leer. whoami@tower:~$ sudo systemctl status alsa-restore.service ● alsa-restore.service - Save/Restore Sound Card State Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled) Active: inactive (dead) Condition: start condition failed at Sun 2020-04-05 17:46:03 CEST; 2h 11min ago └─ ConditionPathExists=/var/lib/alsa/asound.state was not met Docs: man:alsactl(1) Apr 05 17:46:03 tower systemd[1]: Condition check resulted in Save/Restore Sound Card State being skipped. whoami@tower:~$ dmesg | egrep -i "alsa|snd|hdmi" [ 0.111779] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 13.874844] snd_hda_intel 0000:01:00.1: Disabling MSI [ 13.874848] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 13.926967] usbcore: registered new interface driver snd-usb-audio [ 14.664032] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input13 [ 14.664058] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input14 [ 14.664116] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input15 [ 14.664163] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input16 [ 27.263552] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 44 [ 27.443548] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 1 [ 28.451508] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 60 [ 29.435504] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 1 [ 39.575545] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 24 [ 39.611540] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 0 [ 40.187503] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 25 whoami@tower:~$ touch /var/lib/alsa/asound.state touch: '/var/lib/alsa/asound.state' kann nicht berührt werden: Keine Berechtigung whoami@tower:~$ sudo touch /var/lib/alsa/asound.state whoami@tower:~$ sudo systemctl restart alsa-restore.service whoami@tower:~$ sudo systemctl status alsa-restore.service ● alsa-restore.service - Save/Restore Sound Card State Loaded: loaded (/lib/systemd/system/alsa-restore.service; static; vendor preset: enabled) Active: active (exited) since Sun 2020-04-05 19:58:30 CEST; 7s ago Docs: man:alsactl(1) Process: 12503 ExecStartPre=/bin/mkdir -p /run/alsa (code=exited, status=0/SUCCESS) Process: 12504 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa restore (code=exited, status=99) Main PID: 12504 (code=exited, status=99) Apr 05 19:58:30 tower systemd[1]: Starting Save/Restore Sound Card State... Apr 05 19:58:30 tower alsactl[12504]: No state is present for card NVidia Apr 05 19:58:30 tower alsactl[12504]: Found hardware: "HDA-Intel" "Nvidia GPU 93 HDMI/DP" "HDA:10de0093,145837b5,00100100" "0x1458" "0x37b5" Apr 05 19:58:30 tower alsactl[12504]: Hardware is initialized using a generic method Apr 05 19:58:30 tower alsactl[12504]: No state is present for card NVidia Apr 05 19:58:30 tower alsactl[12504]: No state is present for card SoundCard Apr 05 19:58:30 tower alsactl[12504]: Found hardware: "USB-Audio" "USB Mixer" "USB0b05:189d" "" "" Apr 05 19:58:30 tower alsactl[12504]: Hardware is initialized using a generic method Apr 05 19:58:30 tower alsactl[12504]: No state is present for card SoundCard Apr 05 19:58:30 tower systemd[1]: Started Save/Restore Sound Card State. whoami@tower:~$ cat /var/lib/alsa/asound.state whoami@tower:~$ |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Ne-- so wird das nichts 😉 Process: 12504 ExecStart=/usr/sbin/alsactl -E HOME=/run/alsa restore (code=exited, status=99) Die wird von Alsa erstellt beim Einrichten der Hardware. Zeige mal cat /etc/modprobe.d/alsa-base.conf vielleicht bringt es was die USB Karte beim Start nach vorne zu schubsen. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 16 |
Hier ist die Datei... whoami@tower:~$ cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 Auf Basis einer anderen Anleitung hatte ich das (glaube ich) schon gemacht: whoami@tower:~$ cat /etc/modprobe.d/sound-cards-order options snd_usb_audio index=0 options snd_hda_intel index=1 Scheint aber nicht zu funktionieren, siehe hier: whoami@tower:~$ cat /proc/asound/modules 0 snd_hda_intel 1 snd_usb_audio Liegt das vielleicht an der letzten Zeile der von dir besagten Datei? |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Richtig ☺ Ändere es mal wie folgt # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=0 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=0 |
(Themenstarter)
Anmeldungsdatum: Beiträge: 16 |
Soo... habe es geändert und die Reihenfolge wurde bzw. hat sich auch angepasst. Aber das Headset wird immer noch nicht angezeigt... :/ |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Dann wüsste ich jetzt nichts weiter,außer Alsa den Switch für das Headset "aufzuzwingen".Ob es bei USB geht weiß ich nicht - testen 😉 sudo apt-get install alsa-tools-gui Danach das Toll starten mit hdajackretask und mal ein Screenshot davon zeigen. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 16 |
Sieht schwierig aus... https://media-cdn.ubuntu-de.org/forum/attachments/temp/3785906cf10f309dd46ba6288c1079f6 Ich kann auch oben im DropDown Menü nur die Grafikkarte auswählen, die USB Karte wird mir leider nicht angeboten... |
Anmeldungsdatum: Beiträge: 19610 Wohnort: Schleswig-Holstein |
Ok,dann weiß ich das nun auch das es mit USB nicht geht 😛 Kannst du dann wieder entfernen das Toll. sudo apt purge alsa-tools-gui Hab auf die schnelle jetzt keine Idee mehr. |