D 21:50 +0200 [ -L filename ] # Set current tone curve
D 21:50 +0200 [ -m ] # Query media
D 21:50 +0200 [ -r ] # Reset user/NV tone curve
D 21:50 +0200 [ -R ] # Reset printer to factory defaults
D 21:50 +0200 [ -s ] # Query status
D 21:50 +0200 [ -X jobid ] # Abort a printjob
D 21:50 +0200 [CGI] BACKEND=sonyupdr150\t# Sony UP-DR150/UP-DR200/UP-CR10 version 0.18
D 21:50 +0200 [CGI] BACKEND=mitsu70x\t# Mitsubishi CP-D70/D707/K60/D80 version 0.61
D 21:50 +0200 [ -s ] # Query status
D 21:50 +0200 [ -f ] # Use fast return mode
D 21:50 +0200 [ -k num ] # Set standby time (1-60 minutes, 0 disables)
D 21:50 +0200 [ -x num ] # Set USB iSerialNumber Reporting (1 on, 0 off)
D 21:50 +0200 [ -X jobid ] # Abort a printjob
D 21:50 +0200 [CGI] BACKEND=mitsu9550\t# Mitsubishi CP-9550 family version 0.29
D 21:50 +0200 [ -m ] # Query media
D 21:50 +0200 [ -s ] # Query status
D 21:50 +0200 [CGI] BACKEND=mitsup95d\t# Mitsubishi P93D/P95D version 0.05
D 21:50 +0200 [CGI] BACKEND=dnpds40\t# DNP DS40/DS80/DSRX1/DS620 version 0.91
D 21:50 +0200 [ -i ] # Query printer info
D 21:50 +0200 [ -I ] # Query sensor info
D 21:50 +0200 [ -k num ] # Set standby time (1-99 minutes, 0 disables)
D 21:50 +0200 [ -K num ] # Keep Media Status Across Power Cycles (1 on, 0 off)
D 21:50 +0200 [ -n ] # Query counters
D 21:50 +0200 [ -N A|B|M ] # Clear counter A/B/M
D 21:50 +0200 [ -p num ] # Set counter P
D 21:50 +0200 [ -R ] # Reset printer
D 21:50 +0200 [ -s ] # Query status
D 21:50 +0200 [ -x num ] # Set USB iSerialNumber Reporting (1 on, 0 off)
D 21:50 +0200 [ -X ] # Cancel current print job
D 21:50 +0200 [CGI] BACKEND=citizencw01\t# Citizen CW-01 version 0.12
D 21:50 +0200 [ -i ] # Query printer info
D 21:50 +0200 [ -s ] # Query status
D 21:50 +0200 [ -n ] # Query counters
D 21:50 +0200 [ -N A|B|M ] # Clear counter A/B/M
D 21:50 +0200 [cups-deviced] PID 7894 (implicitclass) exited with no errors.
D 21:50 +0200 [cups-deviced] PID 7893 (mdns) exited with no errors.
D 21:50 +0200 [cups-deviced] PID 7892 (serial) exited with no errors.
D 21:50 +0200 [Client 356] CGI data ready to be sent.
D 21:50 +0200 [CGI] Flushed attributes...
D 21:50 +0200 [cups-deviced] Found device \"hp\"...
D 21:50 +0200 [Client 356] con->http=0x5594a0b27250
D 21:50 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7875, file=14
D 21:50 +0200 [Client 356] Waiting for CGI data.
D 21:50 +0200 [Client 356] con->http=0x5594a0b27250
D 21:50 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7875, file=14
D 21:50 +0200 [Client 356] Waiting for CGI data.
D 21:50 +0200 [cups-deviced] PID 7885 (hp) exited with no errors.
D 21:50 +0200 [CGI] libusb_get_device_list=13
E 21:50 +0200 [cups-deviced] PID 7882 (gutenprint52+usb) stopped with status 1!
D 21:50 +0200 [Client 356] CGI data ready to be sent.
D 21:50 +0200 [CGI] Flushed attributes...
D 21:50 +0200 [cups-deviced] Found device \"usb://Brother/MFC-L2710DW%20series?serial=E78295F8N165572\"...
D 21:50 +0200 [Client 356] con->http=0x5594a0b27250
D 21:50 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7875, file=14
D 21:50 +0200 [Client 356] Waiting for CGI data.
D 21:50 +0200 [Client 356] con->http=0x5594a0b27250
D 21:50 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7875, file=14
D 21:50 +0200 [Client 356] Waiting for CGI data.
D 21:50 +0200 [cups-deviced] PID 7886 (usb) exited with no errors.
I 21:51 +0200 Expiring subscriptions...
D 21:52 +0200 [Client 356] CGI data ready to be sent.
D 21:52 +0200 [CGI] Flushed attributes...
D 21:52 +0200 [cups-deviced] Found device \"smb\"...
I 21:52 +0200 Expiring subscriptions...
D 21:52 +0200 [Client 356] con->http=0x5594a0b27250
D 21:52 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7875, file=14
D 21:52 +0200 [Client 356] Waiting for CGI data.
D 21:52 +0200 [Client 356] con->http=0x5594a0b27250
D 21:52 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7875, file=14
D 21:52 +0200 [Client 356] Waiting for CGI data.
D 21:52 +0200 [cups-deviced] PID 7878 (smb) exited with no errors.
D 21:52 +0200 [Client 356] CGI data ready to be sent.
D 21:52 +0200 [CGI] Flushed attributes...
D 21:52 +0200 [cups-deviced] Found device \"hpfax\"...
D 21:52 +0200 [Client 356] con->http=0x5594a0b27250
D 21:52 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7875, file=14
D 21:52 +0200 [Client 356] Waiting for CGI data.
D 21:52 +0200 [Client 356] con->http=0x5594a0b27250
D 21:52 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7875, file=14
D 21:52 +0200 [Client 356] Waiting for CGI data.
D 21:52 +0200 [cups-deviced] PID 7889 (hpfax) exited with no errors.
D 21:52 +0200 [Client 356] CGI data ready to be sent.
D 21:52 +0200 PID 7875 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D 21:52 +0200 [Client 356] con->http=0x5594a0b27250
D 21:52 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7875, file=14
D 21:52 +0200 [Client 356] Waiting for CGI data.
D 21:52 +0200 [Client 356] con->http=0x5594a0b27250
D 21:52 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7875, file=14
D 21:52 +0200 [Client 356] Waiting for CGI data.
D 21:52 +0200 [Client 356] CGI data ready to be sent.
D 21:52 +0200 [Client 356] con->http=0x5594a0b27250
D 21:52 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7875, file=14
D 21:52 +0200 [Client 356] Waiting for CGI data.
D 21:52 +0200 [Client 356] Sending 0-length chunk.
D 21:52 +0200 [Client 356] Flushing write buffer.
D 21:52 +0200 [Client 356] New state is HTTP_STATE_WAITING
D 21:52 +0200 [Client 356] Waiting for request.
D 21:52 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D 21:52 +0200 [Client 356] POST / HTTP/1.1
D 21:52 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D 21:52 +0200 [Client 356] Read: status=200, state=6
D 21:52 +0200 [Client 356] Authorized as root using Local.
D 21:52 +0200 [Client 356] 2.0 CUPS-Get-Devices 2
D 21:52 +0200 CUPS-Get-Devices
D 21:52 +0200 cupsdIsAuthorized: username="root"
D 21:52 +0200 [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D 21:52 +0200 [CGI] argv[1] = "2"
D 21:52 +0200 [CGI] argv[2] = "0"
D 21:52 +0200 [CGI] argv[3] = "15"
D 21:52 +0200 [CGI] argv[4] = "7"
D 21:52 +0200 [CGI] argv[5] = "requested-attributes=all include-schemes=\'dnssd\',\'snmp\',\'driverless\',\'bjnp\',\'bluetooth\'"
D 21:52 +0200 [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D 21:52 +0200 [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D 21:52 +0200 [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D 21:52 +0200 [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D 21:52 +0200 [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D 21:52 +0200 [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D 21:52 +0200 [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D 21:52 +0200 [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D 21:52 +0200 [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D 21:52 +0200 [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D 21:52 +0200 [CGI] envp[10] = "SERVER_ADMIN=root@busch-CQ1015CH"
D 21:52 +0200 [CGI] envp[11] = "SOFTWARE=CUPS/2.2.7"
D 21:52 +0200 [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D 21:52 +0200 [CGI] envp[13] = "USER=root"
D 21:52 +0200 [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D 21:52 +0200 [CGI] envp[15] = "CUPS_SERVER=/var/run/cups/cups.sock"
D 21:52 +0200 [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D 21:52 +0200 [CGI] envp[17] = "AUTH_TYPE=Local"
D 21:52 +0200 [CGI] envp[18] = "LANG=en_US.UTF8"
D 21:52 +0200 [CGI] envp[19] = "REDIRECT_STATUS=1"
D 21:52 +0200 [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D 21:52 +0200 [CGI] envp[21] = "SERVER_NAME=localhost"
D 21:52 +0200 [CGI] envp[22] = "SERVER_PORT=0"
D 21:52 +0200 [CGI] envp[23] = "REMOTE_ADDR=localhost"
D 21:52 +0200 [CGI] envp[24] = "REMOTE_HOST=localhost"
D 21:52 +0200 [CGI] envp[25] = "SCRIPT_NAME=/"
D 21:52 +0200 [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/"
D 21:52 +0200 [CGI] envp[27] = "REMOTE_USER=root"
D 21:52 +0200 [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D 21:52 +0200 [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/2.2.7 (Linux 4.15.0-36-generic; x86_64) IPP/2.0"
D 21:52 +0200 [CGI] envp[30] = "REQUEST_METHOD=POST"
D 21:52 +0200 [CGI] envp[31] = "CONTENT_LENGTH=147"
D 21:52 +0200 [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D 21:52 +0200 cupsdAddCert: Adding certificate for PID 7902
D 21:52 +0200 [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 7902)
I 21:52 +0200 [Client 356] Started "/usr/lib/cups/daemon/cups-deviced" (pid=7902, file=14)
D 21:52 +0200 [Client 356] Waiting for CGI data.
D 21:52 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/driverless (PID 7903)
D 21:52 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 7904)
D 21:52 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/bluetooth (PID 7905)
D 21:52 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 7906)
D 21:52 +0200 [CGI] Started ippfind (PID 7907)
D 21:52 +0200 [CGI] Started post-processing (PID 7908)
D 21:52 +0200 [cups-deviced] PID 7905 (bluetooth) exited with no errors.
D 21:53 +0200 [CGI] sent=0, count=0
I 21:53 +0200 Expiring subscriptions...
D 21:54 +0200 [CGI] sent=0, count=0
I 21:54 +0200 Expiring subscriptions...
D 21:54 +0200 [cups-deviced] PID 7906 (dnssd) exited with no errors.
D 21:54 +0200 [cups-deviced] PID 7904 (snmp) exited with no errors.
I 21:55 +0200 Expiring subscriptions...
D 21:56 +0200 [CGI] PID 7908 (Post-processing) exited with no errors.
I 21:56 +0200 Expiring subscriptions...
D 21:56 +0200 [CGI] PID 7907 (ippfind) stopped with status 1!
D 21:56 +0200 [cups-deviced] PID 7903 (driverless) exited with no errors.
D 21:56 +0200 [Client 356] CGI data ready to be sent.
D 21:56 +0200 PID 7902 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D 21:56 +0200 [Client 356] con->http=0x5594a0b27250
D 21:56 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=7902, file=14
D 21:56 +0200 [Client 356] Waiting for CGI data.
D 21:56 +0200 [Client 356] Script header: Content-Type: application/ipp
D 21:56 +0200 [Client 356] Script header:
D 21:56 +0200 [Client 356] Sending status 200 for CGI.
D 21:56 +0200 [Client 356] cupsdSendHeader: code=200, type="(null)", auth_type=0
D 21:56 +0200 [Client 356] con->http=0x5594a0b27250
D 21:56 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7902, file=14
D 21:56 +0200 [Client 356] Waiting for CGI data.
D 21:56 +0200 [Client 356] CGI data ready to be sent.
D 21:56 +0200 [Client 356] con->http=0x5594a0b27250
D 21:56 +0200 [Client 356] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=7902, file=14
D 21:56 +0200 [Client 356] Waiting for CGI data.
D 21:56 +0200 [Client 356] Sending 0-length chunk.
D 21:56 +0200 [Client 356] Flushing write buffer.
D 21:56 +0200 [Client 356] New state is HTTP_STATE_WAITING
D 21:56 +0200 [Client 356] Waiting for request.
D 21:56 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D 21:56 +0200 [Client 352] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 21:56 +0200 [Client 352] Closing connection.
D 21:56 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I 21:57 +0200 Expiring subscriptions...
I 22:20 +0200 Saving subscriptions.conf...
D 22:20 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I 22:20 +0200 Expiring subscriptions...
D 22:23 +0200 [Client 356] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 22:23 +0200 [Client 356] Closing connection.
D 22:23 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I 22:23 +0200 Expiring subscriptions...
I 22:24 +0200 Expiring subscriptions...
I 26:50 +0200 Expiring subscriptions...
D 26:50 +0200 cupsdAddCert: Adding certificate for PID 0
D 26:50 +0200 Closing client 351 after 300 seconds of inactivity.
D 26:50 +0200 [Client 351] Closing connection.
D 26:50 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D 26:50 +0200 Report: clients=0
D 26:50 +0200 Report: jobs=15
D 26:50 +0200 Report: jobs-active=0
D 26:50 +0200 Report: printers=1
D 26:50 +0200 Report: stringpool-string-count=13392
D 26:50 +0200 Report: stringpool-alloc-bytes=11272
D 26:50 +0200 Report: stringpool-total-bytes=287512
D 37:55 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D 37:56 +0200 [Client 357] Server address is "/var/run/cups/cups.sock".
D 37:56 +0200 [Client 357] Accepted from localhost (Domain)
D 37:56 +0200 [Client 357] Waiting for request.
I 37:56 +0200 Expiring subscriptions...
D 37:56 +0200 cupsdAddCert: Adding certificate for PID 0
D 37:56 +0200 Report: clients=1
D 37:56 +0200 Report: jobs=15
D 37:56 +0200 Report: jobs-active=0
D 37:56 +0200 Report: printers=1
D 37:56 +0200 Report: stringpool-string-count=13392
D 37:56 +0200 Report: stringpool-alloc-bytes=11272
D 37:56 +0200 Report: stringpool-total-bytes=287512
D 37:56 +0200 [Client 357] POST / HTTP/1.1
D 37:56 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D 37:56 +0200 [Client 357] Read: status=200, state=6
D 37:56 +0200 [Client 357] No authentication data provided.
D 37:56 +0200 [Client 357] 2.0 Cancel-Subscription 6
D 37:56 +0200 Cancel-Subscription /
D 37:56 +0200 [Client 357] Returning HTTP Nicht berechtigt for Cancel-Subscription (/) from localhost
D 37:56 +0200 [Client 357] cupsdSendHeader: code=401, type="text/html", auth_type=0
D 37:56 +0200 [Client 357] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D 37:56 +0200 [Client 357] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 37:56 +0200 [Client 357] Closing connection.
D 37:56 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D 37:56 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D 37:56 +0200 [Client 358] Server address is "/var/run/cups/cups.sock".
D 37:56 +0200 [Client 358] Accepted from localhost (Domain)
D 37:56 +0200 [Client 358] Waiting for request.
D 37:56 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D 37:56 +0200 [Client 359] Server address is "/var/run/cups/cups.sock".
D 37:56 +0200 [Client 359] Accepted from localhost (Domain)
D 37:56 +0200 [Client 359] Waiting for request.
D 37:56 +0200 [Client 358] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 37:56 +0200 [Client 358] Closing connection.
D 37:56 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D 37:56 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D 37:56 +0200 [Client 360] Server address is "/var/run/cups/cups.sock".
D 37:56 +0200 [Client 360] Accepted from localhost (Domain)
D 37:56 +0200 [Client 360] Waiting for request.
D 37:56 +0200 [Client 359] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 37:56 +0200 [Client 359] Closing connection.
D 37:56 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D 37:56 +0200 [Client 360] POST / HTTP/1.1
D 37:56 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D 37:56 +0200 [Client 360] Read: status=200, state=6
D 37:56 +0200 [Client 360] Authorized as root using Local.
D 37:56 +0200 [Client 360] 2.0 Cancel-Subscription 6
D 37:56 +0200 Cancel-Subscription /
D 37:56 +0200 cupsdIsAuthorized: username="root"
D 37:56 +0200 cupsdMarkDirty(–--S)
D 37:56 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D 37:56 +0200 [Client 360] Returning IPP successful-ok for Cancel-Subscription (/) from localhost
D 37:56 +0200 [Client 360] Content-Length: 75
D 37:56 +0200 [Client 360] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D 37:56 +0200 [Client 360] con->http=0x5594a0a3f7a0
D 37:56 +0200 [Client 360] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x5594a0aef660(IPP_STATE_DATA), pipe_pid=0, file=-1
D 37:56 +0200 [Client 360] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D 37:56 +0200 [Client 360] bytes=0, http_state=0, data_remaining=75
D 37:56 +0200 [Client 360] Flushing write buffer.
D 37:56 +0200 [Client 360] New state is HTTP_STATE_WAITING
D 37:56 +0200 [Client 360] Waiting for request.
D 37:56 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D 37:56 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D 37:56 +0200 [Client 361] Server address is "/var/run/cups/cups.sock".
D 37:56 +0200 [Client 361] Accepted from localhost (Domain)
D 37:56 +0200 [Client 361] Waiting for request.
D 37:56 +0200 [Client 361] POST / HTTP/1.1
D 37:56 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D 37:56 +0200 [Client 361] Read: status=200, state=6
D 37:56 +0200 [Client 361] No authentication data provided.
D 37:56 +0200 [Client 361] 2.0 Cancel-Subscription 7
D 37:56 +0200 Cancel-Subscription /
D 37:56 +0200 cupsdIsAuthorized: requesting-user-name="root"
D 37:56 +0200 cupsdMarkDirty(–--S)
D 37:56 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D 37:56 +0200 [Client 361] Returning IPP successful-ok for Cancel-Subscription (/) from localhost
D 37:56 +0200 [Client 361] Content-Length: 75
D 37:56 +0200 [Client 361] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D 37:56 +0200 [Client 361] con->http=0x5594a0b2de10
D 37:56 +0200 [Client 361] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x5594a0abb4f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D 37:56 +0200 [Client 361] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D 37:56 +0200 [Client 361] bytes=0, http_state=0, data_remaining=75
D 37:56 +0200 [Client 361] Flushing write buffer.
D 37:56 +0200 [Client 361] New state is HTTP_STATE_WAITING
D 37:56 +0200 [Client 361] Waiting for request.
D 37:56 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D 37:56 +0200 [Client 361] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 37:56 +0200 [Client 361] Closing connection.
D 37:56 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D 37:56 +0200 [Client 360] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 37:56 +0200 [Client 360] Closing connection.
D 37:56 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D 37:57 +0200 [Notifier] state=-1
D 37:58 +0200 [Notifier] ippReadFile() returned IPP_ERROR!
I 37:58 +0200 Expiring subscriptions...
D 37:58 +0200 PID 5244 (/usr/lib/cups/notifier/dbus) exited with no errors.
I 38:01 +0200 Scheduler shutting down normally.
D 38:01 +0200 Discarding unused server-stopped event...
I 38:01 +0200 Saving subscriptions.conf...
D 38:06 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D 38:06 +0200 Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
I 38:06 +0200 Saving job.cache...
D 38:07 +0200 cupsdStopSelect()
I 52:49 +0200 Listening to /var/run/cups/cups.sock (Domain)
W 52:49 +0200 Duplicate listen address "/var/run/cups/cups.sock" ignored.
E 52:49 +0200 Unknown directive JobPrivateAccess on line 84 of /etc/cups/cupsd.conf.
E 52:49 +0200 Unknown directive JobPrivateValues on line 85 of /etc/cups/cupsd.conf.
E 52:49 +0200 Unknown directive SubscriptionPrivateAccess on line 86 of /etc/cups/cupsd.conf.
E 52:49 +0200 Unknown directive SubscriptionPrivateValues on line 87 of /etc/cups/cupsd.conf.
I 52:49 +0200 Remote access is disabled.
D 52:49 +0200 Added auto ServerAlias busch-CQ1015CH
I 52:49 +0200 Loaded configuration file "/etc/cups/cupsd.conf"
D 52:49 +0200 Using keychain "/etc/cups/ssl" for server name "busch-CQ1015CH".
D 52:49 +0200 Repairing ownership of "/run/cups"
D 52:49 +0200 Creating missing directory "/run/cups/certs"
D 52:49 +0200 Repairing ownership of "/run/cups/certs"
D 52:49 +0200 Repairing access permissions of "/run/cups/certs"
I 52:49 +0200 Using default TempDir of /var/spool/cups/tmp...
I 52:49 +0200 Configured for up to 100 clients.
I 52:49 +0200 Allowing up to 100 client connections per host.
I 52:49 +0200 Using policy "default" as the default.
I 52:49 +0200 Full reload is required.
I 52:49 +0200 Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 78 types, 118 filters...
D 52:49 +0200 Loading printer MFCL2710DW...
D 52:49 +0200 load_ppd: Loading /var/cache/cups/MFCL2710DW.data...
D 52:49 +0200 cupsdRegisterPrinter(p=0x562287721320(MFCL2710DW))
I 52:49 +0200 Generating printcap /run/cups/printcap...
I 52:49 +0200 Loading job cache file "/var/cache/cups/job.cache"...
D 52:49 +0200 [Job 258] Loading from cache...
D 52:49 +0200 [Job 259] Loading from cache...
D 52:49 +0200 [Job 260] Loading from cache...
D 52:49 +0200 [Job 261] Loading from cache...
D 52:49 +0200 [Job 262] Loading from cache...
D 52:49 +0200 [Job 263] Loading from cache...
D 52:49 +0200 [Job 264] Loading from cache...
D 52:49 +0200 [Job 265] Loading from cache...
D 52:49 +0200 [Job 266] Loading from cache...
D 52:49 +0200 [Job 267] Loading from cache...
D 52:49 +0200 [Job 268] Loading from cache...
D 52:49 +0200 [Job 269] Loading from cache...
D 52:49 +0200 [Job 270] Loading from cache...
D 52:49 +0200 [Job 271] Loading from cache...
D 52:49 +0200 [Job 272] Loading from cache...
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:49 +0200 cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
I 52:49 +0200 Full reload complete.
D 52:49 +0200 cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I 52:49 +0200 Cleaning out old files in "/var/spool/cups/tmp".
D 52:49 +0200 cupsdCleanFiles(path="/var/spool/cups/tmp/.hplip", pattern="(null)")
I 52:49 +0200 Cleaning out old files in "/var/spool/cups/tmp/.hplip".
D 52:49 +0200 cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I 52:49 +0200 Cleaning out old files in "/var/cache/cups".
D 52:49 +0200 service_checkin: pid=813
D 52:49 +0200 service_checkin: 1 listeners.
D 52:49 +0200 service_add_listener: Listener #1 at fd 3, "/run/cups/cups.sock".
D 52:49 +0200 service_add_listener: Adding new listener #1 for /run/cups/cups.sock.
D 52:49 +0200 Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
D 52:49 +0200 Calling FindDeviceById(cups-MFCL2710DW)
D 52:51 +0200 FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-MFCL2710DW\' does not exist
D 52:51 +0200 Using profile ID "MFCL2710DW-Gray..".
D 52:51 +0200 Calling CreateProfile(MFCL2710DW-Gray..,temp)
D 52:52 +0200 Created profile "/org/freedesktop/ColorManager/profiles/MFCL2710DW_Gray".
* I 52:52 +0200 Registering ICC color profiles for "MFCL2710DW".
* D 52:52 +0200 Calling CreateDevice(cups-MFCL2710DW,temp)
* D 52:52 +0200 Created device "/org/freedesktop/ColorManager/devices/cups_MFCL2710DW".
* D 52:52 +0200 Calling /org/freedesktop/ColorManager/devices/cups_MFCL2710DW:AddProfile(/org/freedesktop/ColorManager/profiles/MFCL2710DW_Gray) [soft]
I 52:52 +0200 Listening to /var/run/cups/cups.sock on fd 7...
I 52:52 +0200 Listening to /run/cups/cups.sock on fd 3...
I 52:52 +0200 Resuming new connection processing...
D 52:52 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D 52:52 +0200 cupsdAddCert: Adding certificate for PID 0
D 52:52 +0200 Discarding unused server-started event...
D 52:52 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D 52:52 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D 52:52 +0200 [Client 1] Server address is "/run/cups/cups.sock".
D 52:52 +0200 [Client 1] Accepted from localhost (Domain)
D 52:52 +0200 [Client 1] Waiting for request.
D 52:52 +0200 Report: clients=1
D 52:52 +0200 Report: jobs=15
D 52:52 +0200 Report: jobs-active=0
D 52:52 +0200 Report: printers=1
D 52:52 +0200 Report: stringpool-string-count=1111
D 52:52 +0200 Report: stringpool-alloc-bytes=9776
D 52:52 +0200 Report: stringpool-total-bytes=21824
D 52:52 +0200 [Client 1] POST / HTTP/1.1
D 52:52 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D 52:52 +0200 [Client 1] Read: status=200, state=6
D 52:52 +0200 [Client 1] No authentication data provided.
D 52:52 +0200 [Client 1] 2.0 Create-Printer-Subscriptions 1
D 52:52 +0200 Create-Printer-Subscriptions /
D 52:52 +0200 create_subscriptions(con=0x5622877cdbd0(1), uri="/")
D 52:52 +0200 pullmethod="ippget"
D 52:52 +0200 notify-lease-duration=86400
D 52:52 +0200 notify-time-interval=60
D 52:52 +0200 cupsdAddSubscription(mask=7ff, dest=(nil)(), job=(nil)(0), uri="(null)")
D 52:52 +0200 Added subscription #2609 for server.
D 52:52 +0200 cupsdMarkDirty(–--S)
D 52:52 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D 52:52 +0200 [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost
D 52:52 +0200 [Client 1] Content-Length: 107
D 52:52 +0200 [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D 52:52 +0200 [Client 1] con->http=0x5622877dd850
D 52:52 +0200 [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x5622877d4e50(IPP_STATE_DATA), pipe_pid=0, file=-1
D 52:52 +0200 [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D 52:52 +0200 [Client 1] bytes=0, http_state=0, data_remaining=107
D 52:52 +0200 [Client 1] Flushing write buffer.
D 52:52 +0200 [Client 1] New state is HTTP_STATE_WAITING
D 52:52 +0200 [Client 1] Waiting for request.
D 52:52 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D 52:52 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D 52:52 +0200 [Client 2] Server address is "/var/run/cups/cups.sock".
D 52:52 +0200 [Client 2] Accepted from localhost (Domain)
D 52:52 +0200 [Client 2] Waiting for request.
D 52:52 +0200 [Client 2] POST / HTTP/1.1
D 52:52 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D 52:52 +0200 [Client 2] Read: status=200, state=6
D 52:52 +0200 [Client 2] No authentication data provided.
D 52:52 +0200 [Client 2] 2.0 CUPS-Get-Printers 2
D 52:52 +0200 CUPS-Get-Printers
D 52:52 +0200 [Client 2] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D 52:52 +0200 [Client 2] Content-Length: 1276
D 52:52 +0200 [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D 52:52 +0200 [Client 2] con->http=0x5622877e1c20
D 52:52 +0200 [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1276, response=0x5622877d8b00(IPP_STATE_DATA), pipe_pid=0, file=-1
D 52:52 +0200 [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D 52:52 +0200 [Client 2] bytes=0, http_state=0, data_remaining=1276
D 52:52 +0200 [Client 2] Flushing write buffer.
D 52:52 +0200 [Client 2] New state is HTTP_STATE_WAITING
D 52:52 +0200 [Client 2] Waiting for request.
D 52:52 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D 52:52 +0200 [Client 2] POST / HTTP/1.1
D 52:52 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D 52:52 +0200 [Client 2] Read: status=200, state=6
D 52:52 +0200 [Client 2] No authentication data provided.
D 52:52 +0200 [Client 2] 2.0 CUPS-Get-Default 3
D 52:52 +0200 CUPS-Get-Default
D 52:52 +0200 [Client 2] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D 52:52 +0200 [Client 2] Content-Length: 10192
D 52:52 +0200 [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D 52:52 +0200 [Client 2] con->http=0x5622877e1c20
D 52:52 +0200 [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10192, response=0x5622877dca80(IPP_STATE_DATA), pipe_pid=0, file=-1
D 52:52 +0200 [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D 52:52 +0200 [Client 2] bytes=0, http_state=0, data_remaining=10192
D 52:52 +0200 [Client 2] Flushing write buffer.
D 52:52 +0200 [Client 2] New state is HTTP_STATE_WAITING
D 52:52 +0200 [Client 2] Waiting for request.
D 52:52 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D 52:52 +0200 [Client 1] POST / HTTP/1.1
D 52:52 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D 52:52 +0200 [Client 1] Read: status=200, state=6
D 52:52 +0200 [Client 1] No authentication data provided.
D 52:52 +0200 [Client 1] 2.0 CUPS-Get-Default 4
D 52:52 +0200 CUPS-Get-Default
D 52:52 +0200 [Client 1] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D 52:52 +0200 [Client 1] Content-Length: 10192
D 52:52 +0200 [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D 52:52 +0200 [Client 1] con->http=0x5622877dd850
D 52:52 +0200 [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10192, response=0x5622877d2c70(IPP_STATE_DATA), pipe_pid=0, file=-1
D 52:52 +0200 [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D 52:52 +0200 [Client 1] bytes=0, http_state=0, data_remaining=10192
D 52:52 +0200 [Client 1] Flushing write buffer.
D 52:52 +0200 [Client 1] New state is HTTP_STATE_WAITING
D 52:52 +0200 [Client 1] Waiting for request.
D 52:52 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I 52:53 +0200 Expiring subscriptions...
D 52:54 +0200 [Client 1] POST / HTTP/1.1
D 52:54 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D 52:54 +0200 [Client 1] Read: status=200, state=6
D 52:54 +0200 [Client 1] No authentication data provided.
D 52:54 +0200 [Client 1] 2.0 Create-Printer-Subscriptions 5
D 52:54 +0200 Create-Printer-Subscriptions /
D 52:54 +0200 create_subscriptions(con=0x5622877cdbd0(1), uri="/")
D 52:54 +0200 recipient="dbus://"
D 52:54 +0200 notify-lease-duration=86400
D 52:54 +0200 notify-time-interval=0
D 52:54 +0200 cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
D 52:54 +0200 Added subscription #2610 for server.
D 52:54 +0200 cupsdMarkDirty(–--S)
D 52:54 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D 52:54 +0200 [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost
D 52:54 +0200 [Client 1] Content-Length: 107
D 52:54 +0200 [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I 52:54 +0200 Expiring subscriptions...
D 52:54 +0200 [Client 1] con->http=0x5622877dd850
D 52:54 +0200 [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x5622877c6b50(IPP_STATE_DATA), pipe_pid=0, file=-1
D 52:54 +0200 [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D 52:54 +0200 [Client 1] bytes=0, http_state=0, data_remaining=107
D 52:54 +0200 [Client 1] Flushing write buffer.
D 52:54 +0200 [Client 1] New state is HTTP_STATE_WAITING
D 52:54 +0200 [Client 1] Waiting for request.
D 52:54 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I 52:55 +0200 Expiring subscriptions...
I 53:23 +0200 Saving subscriptions.conf...
D 53:23 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I 53:23 +0200 Expiring subscriptions...
D 55:38 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D 55:38 +0200 [Client 3] Server address is "/var/run/cups/cups.sock".
D 55:38 +0200 [Client 3] Accepted from localhost (Domain)
D 55:38 +0200 [Client 3] Waiting for request.
I 55:38 +0200 Expiring subscriptions...
D 55:38 +0200 Report: clients=3
D 55:38 +0200 Report: jobs=15
D 55:38 +0200 Report: jobs-active=0
D 55:38 +0200 Report: printers=1
D 55:38 +0200 Report: stringpool-string-count=1115
D 55:38 +0200 Report: stringpool-alloc-bytes=9840
D 55:38 +0200 Report: stringpool-total-bytes=21920
D 55:38 +0200 [Client 3] POST / HTTP/1.1
D 55:38 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D 55:38 +0200 [Client 3] Read: status=200, state=6
D 55:38 +0200 [Client 3] No authentication data provided.
D 55:38 +0200 [Client 3] Read: status=100, state=6
D 55:38 +0200 [Client 3] Read: status=100, state=6
D 55:38 +0200 [Client 3] Read: status=100, state=6
D 55:38 +0200 [Client 3] Read: status=100, state=6
D 55:38 +0200 [Client 3] Read: status=100, state=6
D 55:38 +0200 [Client 3] Read: status=100, state=6
D 55:38 +0200 [Client 3] Read: status=100, state=6
D 55:38 +0200 [Client 3] Read: status=100, state=6
D 55:38 +0200 [Client 3] Read: status=100, state=6
D 55:38 +0200 [Client 3] 2.0 Get-Jobs 1
D 55:38 +0200 Get-Jobs ipp://localhost/printers/
D 55:38 +0200 [Client 3] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost
D 55:38 +0200 [Client 3] Content-Length: 75
D 55:38 +0200 [Client 3] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D 55:38 +0200 [Client 3] con->http=0x5622877e5ff0
D 55:38 +0200 [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x5622877d5120(IPP_STATE_DATA), pipe_pid=0, file=-1
D 55:38 +0200 [Client 3] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D 55:38 +0200 [Client 3] bytes=0, http_state=0, data_remaining=75
D 55:38 +0200 [Client 3] Flushing write buffer.
D 55:38 +0200 [Client 3] New state is HTTP_STATE_WAITING
D 55:38 +0200 [Client 3] Waiting for request.
D 55:38 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D 55:38 +0200 [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 55:38 +0200 [Client 3] Closing connection.
D 55:38 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I 55:39 +0200 Expiring subscriptions...
D 55:40 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D 55:40 +0200 [Client 4] Server address is "/var/run/cups/cups.sock".
D 55:40 +0200 [Client 4] Accepted from localhost (Domain)
D 55:40 +0200 [Client 4] Waiting for request.
I 55:40 +0200 Expiring subscriptions...
D 55:40 +0200 [Client 4] POST / HTTP/1.1
D 55:40 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D 55:40 +0200 [Client 4] Read: status=200, state=6
D 55:40 +0200 [Client 4] No authentication data provided.
D 55:40 +0200 [Client 4] 2.0 CUPS-Get-Printers 1
D 55:40 +0200 CUPS-Get-Printers
D 55:40 +0200 [Client 4] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D 55:40 +0200 [Client 4] Content-Length: 392
D 55:40 +0200 [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D 55:40 +0200 [Client 4] con->http=0x5622877e5ff0
D 55:40 +0200 [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=392, response=0x5622877d7920(IPP_STATE_DATA), pipe_pid=0, file=-1
D 55:40 +0200 [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D 55:40 +0200 [Client 4] bytes=0, http_state=0, data_remaining=392
D 55:40 +0200 [Client 4] Flushing write buffer.
D 55:40 +0200 [Client 4] New state is HTTP_STATE_WAITING
D 55:40 +0200 [Client 4] Waiting for request.
D 55:40 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
I 55:41 +0200 Expiring subscriptions...
I 57:53 +0200 Expiring subscriptions...
D 57:53 +0200 cupsdAddCert: Adding certificate for PID 0
D 57:53 +0200 Closing client 2 after 300 seconds of inactivity.
D 57:53 +0200 [Client 2] Closing connection.
D 57:53 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D 57:53 +0200 Report: clients=2
D 57:53 +0200 Report: jobs=15
D 57:53 +0200 Report: jobs-active=0
D 57:53 +0200 Report: printers=1
D 57:53 +0200 Report: stringpool-string-count=1115
D 57:53 +0200 Report: stringpool-alloc-bytes=9840
D 57:53 +0200 Report: stringpool-total-bytes=21920
I 57:55 +0200 Expiring subscriptions...
D 57:55 +0200 Closing client 1 after 300 seconds of inactivity.
D 57:55 +0200 [Client 1] Closing connection.
D 57:55 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I 00:41 +0200 Expiring subscriptions...
D 00:41 +0200 Closing client 4 after 300 seconds of inactivity.
D 00:41 +0200 [Client 4] Closing connection.
D 00:41 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D 00:41 +0200 Report: clients=0
D 00:41 +0200 Report: jobs=15
D 00:41 +0200 Report: jobs-active=0
D 00:41 +0200 Report: printers=1
D 00:41 +0200 Report: stringpool-string-count=1111
D 00:41 +0200 Report: stringpool-alloc-bytes=9776
D 00:41 +0200 Report: stringpool-total-bytes=21824
D 06:09 +0200 cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D 06:09 +0200 [Client 5] Server address is "/var/run/cups/cups.sock".
D 06:09 +0200 [Client 5] Accepted from localhost (Domain)
D 06:09 +0200 [Client 5] Waiting for request.
I 06:09 +0200 Expiring subscriptions...
I 06:09 +0200 Subscription 2565 has expired...
D 06:09 +0200 cupsdMarkDirty(–--S)
D 06:09 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients"
D 06:09 +0200 cupsdAddCert: Adding certificate for PID 0
D 06:09 +0200 Report: clients=1
D 06:09 +0200 Report: jobs=15
D 06:09 +0200 Report: jobs-active=0
D 06:09 +0200 Report: printers=1
D 06:09 +0200 Report: stringpool-string-count=1111
D 06:09 +0200 Report: stringpool-alloc-bytes=9776
D 06:09 +0200 Report: stringpool-total-bytes=21824
D 06:09 +0200 [Client 5] POST / HTTP/1.1
D 06:09 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D 06:09 +0200 [Client 5] Read: status=200, state=6
D 06:09 +0200 [Client 5] No authentication data provided.
D 06:09 +0200 [Client 5] 2.0 CUPS-Get-Devices 1
D 06:09 +0200 CUPS-Get-Devices
D 06:09 +0200 cupsdIsAuthorized: username=""
D 06:09 +0200 [Client 5] Returning HTTP Nicht berechtigt for CUPS-Get-Devices (no URI) from localhost
D 06:09 +0200 [Client 5] cupsdSendHeader: code=401, type="text/html", auth_type=0
D 06:09 +0200 [Client 5] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D 06:09 +0200 [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 06:09 +0200 [Client 5] Closing connection.
D 06:09 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D 06:09 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D 06:09 +0200 [Client 6] Server address is "/var/run/cups/cups.sock".
D 06:09 +0200 [Client 6] Accepted from localhost (Domain)
D 06:09 +0200 [Client 6] Waiting for request.
D 06:09 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D 06:09 +0200 [Client 7] Server address is "/var/run/cups/cups.sock".
D 06:09 +0200 [Client 7] Accepted from localhost (Domain)
D 06:09 +0200 [Client 7] Waiting for request.
D 06:09 +0200 [Client 6] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 06:09 +0200 [Client 6] Closing connection.
D 06:09 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D 06:09 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D 06:09 +0200 [Client 8] Server address is "/var/run/cups/cups.sock".
D 06:09 +0200 [Client 8] Accepted from localhost (Domain)
D 06:09 +0200 [Client 8] Waiting for request.
D 06:09 +0200 [Client 7] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 06:09 +0200 [Client 7] Closing connection.
D 06:09 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D 06:09 +0200 [Client 8] POST / HTTP/1.1
D 06:09 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D 06:09 +0200 [Client 8] Read: status=200, state=6
D 06:09 +0200 [Client 8] Authorized as root using Local.
D 06:09 +0200 [Client 8] 2.0 CUPS-Get-Devices 1
D 06:09 +0200 CUPS-Get-Devices
D 06:09 +0200 cupsdIsAuthorized: username="root"
D 06:09 +0200 [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D 06:09 +0200 [CGI] argv[1] = "1"
D 06:09 +0200 [CGI] argv[2] = "0"
D 06:09 +0200 [CGI] argv[3] = "2"
D 06:09 +0200 [CGI] argv[4] = "7"
D 06:09 +0200 [CGI] argv[5] = "requested-attributes=all exclude-schemes=\'beh\',\'cups-pdf\',\'bluetooth\',\'dnssd\',\'http\',\'https\',\'ipp\',\'lpd\',\'ncp\',\'parallel\',\'scsi\',\'smb\',\'snmp\',\'socket\'"
D 06:09 +0200 [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D 06:09 +0200 [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D 06:09 +0200 [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D 06:09 +0200 [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D 06:09 +0200 [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D 06:09 +0200 [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D 06:09 +0200 [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D 06:09 +0200 [CGI] envp[7] = "CUPS_STATEDIR=/run/cups"
D 06:09 +0200 [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D 06:09 +0200 [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D 06:09 +0200 [CGI] envp[10] = "SERVER_ADMIN=root@busch-CQ1015CH"
D 06:09 +0200 [CGI] envp[11] = "SOFTWARE=CUPS/2.2.7"
D 06:09 +0200 [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D 06:09 +0200 [CGI] envp[13] = "USER=root"
D 06:09 +0200 [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D 06:09 +0200 [CGI] envp[15] = "CUPS_SERVER=/var/run/cups/cups.sock"
D 06:09 +0200 [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D 06:09 +0200 [CGI] envp[17] = "AUTH_TYPE=Local"
D 06:09 +0200 [CGI] envp[18] = "LANG=de_CH.UTF8"
D 06:09 +0200 [CGI] envp[19] = "REDIRECT_STATUS=1"
D 06:09 +0200 [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D 06:09 +0200 [CGI] envp[21] = "SERVER_NAME=localhost"
D 06:09 +0200 [CGI] envp[22] = "SERVER_PORT=0"
D 06:09 +0200 [CGI] envp[23] = "REMOTE_ADDR=localhost"
D 06:09 +0200 [CGI] envp[24] = "REMOTE_HOST=localhost"
D 06:09 +0200 [CGI] envp[25] = "SCRIPT_NAME=/"
D 06:09 +0200 [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/"
D 06:09 +0200 [CGI] envp[27] = "REMOTE_USER=root"
D 06:09 +0200 [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D 06:09 +0200 [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/2.2.7 (Linux 4.15.0-36-generic; x86_64) IPP/2.0"
D 06:09 +0200 [CGI] envp[30] = "REQUEST_METHOD=POST"
D 06:09 +0200 [CGI] envp[31] = "CONTENT_LENGTH=244"
D 06:09 +0200 [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D 06:09 +0200 cupsdAddCert: Adding certificate for PID 2185
D 06:09 +0200 [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 2185)
I 06:09 +0200 [Client 8] Started "/usr/lib/cups/daemon/cups-deviced" (pid=2185, file=12)
D 06:09 +0200 [Client 8] Waiting for CGI data.
D 06:09 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/cups-brf (PID 2186)
D 06:09 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/driverless (PID 2187)
D 06:09 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/gutenprint52+usb (PID 2188)
D 06:09 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/hp (PID 2189)
D 06:09 +0200 [CGI] Multi-Call Dye-sublimation CUPS Backend version 0.71G
D 06:09 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 2190)
D 06:09 +0200 [CGI] Copyright 2007-2016 Solomon Peachy
D 06:09 +0200 [CGI] This free software comes with ABSOLUTELY NO WARRANTY!
D 06:09 +0200 [CGI] Licensed under the GNU GPL. Run with \'-G\' for more details.
D 06:09 +0200 [CGI]
D 06:09 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/hpfax (PID 2192)
D 06:09 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 2193)
D 06:09 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 2194)
D 06:09 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 2195)
D 06:09 +0200 [cups-deviced] Started backend /usr/lib/cups/backend/implicitclass (PID 2197)
D 06:09 +0200 [Client 8] CGI data ready to be sent.
D 06:09 +0200 [Client 8] con->http=0x5622877dd850
D 06:09 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=2185, file=12
D 06:09 +0200 [Client 8] Waiting for CGI data.
D 06:09 +0200 [Client 8] Script header: Content-Type: application/ipp
D 06:09 +0200 [Client 8] Script header:
D 06:09 +0200 [Client 8] Sending status 200 for CGI.
D 06:09 +0200 [Client 8] cupsdSendHeader: code=200, type="(null)", auth_type=0
D 06:09 +0200 [Client 8] con->http=0x5622877dd850
D 06:09 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2185, file=12
D 06:09 +0200 [Client 8] Waiting for CGI data.
D 06:09 +0200 [CGI] Flushed attributes...
D 06:09 +0200 [cups-deviced] Found device \"cups-brf:/\"...
D 06:09 +0200 [cups-deviced] PID 2186 (cups-brf) exited with no errors.
D 06:09 +0200 [CGI] Loading USB quirks from \"/usr/share/cups/usb\".
D 06:09 +0200 [CGI] Started ippfind (PID 2198)
D 06:09 +0200 [CGI] Started post-processing (PID 2199)
D 06:09 +0200 [CGI] Loaded 159 quirks.
D 06:09 +0200 [CGI] list_devices
D 06:09 +0200 [cups-deviced] PID 2195 (mdns) exited with no errors.
D 06:09 +0200 [CGI] Environment variables:
D 06:09 +0200 [CGI] DYESUB_DEBUG EXTRA_PID EXTRA_VID EXTRA_TYPE BACKEND SERIAL
D 06:09 +0200 [CGI] CUPS Usage:
D 06:09 +0200 [CGI] DEVICE_URI=someuri gutenprint52+usb job user title num-copies options [ filename ]
D 06:09 +0200 [CGI]
D 06:09 +0200 [CGI] Standalone Usage:
D 06:09 +0200 [CGI] gutenprint52+usb
D 06:09 +0200 [ -D ] [ -G ] [ -f ]
D 06:09 +0200 [ backend_specific_args ]
D 06:09 +0200 [ -d copies ]
D 06:09 +0200 [ - | infile ]
D 06:09 +0200 [CGI] BACKEND=canonselphy\t# Canon SELPHY CP/ES version 0.93
D 06:09 +0200 [ -R ] # Reset printer
D 06:09 +0200 [CGI] BACKEND=canonselphyneo\t# Canon SELPHY CPneo version 0.08
D 06:09 +0200 [ -R ] # Reset printer
D 06:09 +0200 [CGI] BACKEND=kodak6800\t# Kodak 6800/6850 version 0.58
D 06:09 +0200 [ -c filename ] # Get tone curve
D 06:09 +0200 [ -C filename ] # Set tone curve
D 06:09 +0200 [ -m ] # Query media
D 06:09 +0200 [ -s ] # Query status
D 06:09 +0200 [ -R ] # Reset printer
D 06:09 +0200 [ -X jobid ] # Cancel Job
D 06:09 +0200 [CGI] BACKEND=kodak605\t# Kodak 605 version 0.27
D 06:09 +0200 [ -C filename ] # Set tone curve
D 06:09 +0200 [ -m ] # Query media
D 06:09 +0200 [ -s ] # Query status
D 06:09 +0200 [CGI] BACKEND=kodak1400\t# Kodak 1400/805 version 0.34
D 06:09 +0200 [ -C filename ] # Set tone curve
D 06:09 +0200 [CGI] BACKEND=shinkos1245\t# Shinko/Sinfonia CHC-S1245 version 0.13WIP
D 06:09 +0200 [ -m ] # Query media
D 06:09 +0200 [ -s ] # Query status
D 06:09 +0200 [ -u ] # Query user string
D 06:09 +0200 [ -U sometext ] # Set user string
D 06:09 +0200 [ -R ] # Reset printer
D 06:09 +0200 [ -X jobid ] # Abort a printjob
D 06:09 +0200 [ -F ] # Tone curve refers to FINE mode
D 06:09 +0200 [ -c filename ] # Get user/NV tone curve
D 06:09 +0200 [ -C filename ] # Set user/NV tone curve
D 06:09 +0200 [ -l filename ] # Get current tone curve
D 06:09 +0200 [ -L filename ] # Set current tone curve
D 06:09 +0200 [CGI] BACKEND=shinkos2145\t# Shinko/Sinfonia CHC-S2145 version 0.48
D 06:09 +0200 [ -b 0|1 ] # Disable/Enable control panel
D 06:09 +0200 [ -c filename ] # Get user/NV tone curve
D 06:09 +0200 [ -C filename ] # Set user/NV tone curve
D 06:09 +0200 [ -e ] # Query error log
D 06:09 +0200 [ -f ] # Use fast return mode
D 06:09 +0200 [ -F ] # Flash Printer LED
D 06:09 +0200 [ -i ] # Query printer info
D 06:09 +0200 [ -l filename ] # Get current tone curve
D 06:09 +0200 [ -L filename ] # Set current tone curve
D 06:09 +0200 [ -m ] # Query media
D 06:09 +0200 [Client 8] CGI data ready to be sent.
D 06:09 +0200 [CGI] Flushed attributes...
D 06:09 +0200 [cups-deviced] Found device \"ipps\"...
D 06:09 +0200 [Client 8] con->http=0x5622877dd850
D 06:09 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2185, file=12
D 06:09 +0200 [Client 8] Waiting for CGI data.
D 06:09 +0200 [Client 8] con->http=0x5622877dd850
D 06:09 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2185, file=12
D 06:09 +0200 [Client 8] Waiting for CGI data.
D 06:09 +0200 [cups-deviced] PID 2197 (implicitclass) exited with no errors.
D 06:09 +0200 [ -r ] # Reset user/NV tone curve
D 06:09 +0200 [ -R ] # Reset printer to factory defaults
D 06:09 +0200 [ -s ] # Query status
D 06:09 +0200 [ -u ] # Query user string
D 06:09 +0200 [ -U sometext ] # Set user string
D 06:09 +0200 [ -X jobid ] # Abort a printjob
D 06:09 +0200 [CGI] BACKEND=shinkos6145\t# Shinko/Sinfonia CHC-S6145 version 0.22
D 06:09 +0200 [ -c filename ] # Get user/NV tone curve
D 06:09 +0200 [ -C filename ] # Set user/NV tone curve
D 06:09 +0200 [ -e ] # Query error log
D 06:09 +0200 [ -F ] # Flash Printer LED
D 06:09 +0200 [ -i ] # Query printer info
D 06:09 +0200 [ -k num ] # Set sleep time (5-240 minutes)
D 06:09 +0200 [ -l filename ] # Get current tone curve
D 06:09 +0200 [ -L filename ] # Set current tone curve
D 06:09 +0200 [ -m ] # Query media
D 06:09 +0200 [ -q filename ] # Extract eeprom data
D 06:09 +0200 [ -Q filename ] # Extract image correction params
D 06:09 +0200 [ -r ] # Reset user/NV tone curve
D 06:09 +0200 [ -R ] # Reset printer to factory defaults
D 06:09 +0200 [ -s ] # Query status
D 06:09 +0200 [ -X jobid ] # Abort a printjob
D 06:09 +0200 [CGI] BACKEND=shinkos6245\t# Shinko/Sinfonia CHC-S6245 version 0.07WIP
D 06:09 +0200 [ -c filename ] # Get user/NV tone curve
D 06:09 +0200 [ -C filename ] # Set user/NV tone curve
D 06:09 +0200 [ -e ] # Query error log
D 06:09 +0200 [ -F ] # Flash Printer LED
D 06:09 +0200 [ -i ] # Query printer info
D 06:09 +0200 [ -k num ] # Set sleep time (5-240 minutes)
D 06:09 +0200 [ -l filename ] # Get current tone curve
D 06:09 +0200 [ -L filename ] # Set current tone curve
D 06:09 +0200 [ -m ] # Query media
D 06:09 +0200 [ -r ] # Reset user/NV tone curve
D 06:09 +0200 [ -R ] # Reset printer to factory defaults
D 06:09 +0200 [ -s ] # Query status
D 06:09 +0200 [ -X jobid ] # Abort a printjob
D 06:09 +0200 [CGI] BACKEND=sonyupdr150\t# Sony UP-DR150/UP-DR200/UP-CR10 version 0.18
D 06:09 +0200 [CGI] BACKEND=mitsu70x\t# Mitsubishi CP-D70/D707/K60/D80 version 0.61
D 06:09 +0200 [ -s ] # Query status
D 06:09 +0200 [ -f ] # Use fast return mode
D 06:09 +0200 [ -k num ] # Set standby time (1-60 minutes, 0 disables)
D 06:09 +0200 [ -x num ] # Set USB iSerialNumber Reporting (1 on, 0 off)
D 06:09 +0200 [ -X jobid ] # Abort a printjob
D 06:09 +0200 [CGI] BACKEND=mitsu9550\t# Mitsubishi CP-9550 family version 0.29
D 06:09 +0200 [ -m ] # Query media
D 06:09 +0200 [ -s ] # Query status
D 06:09 +0200 [CGI] BACKEND=mitsup95d\t# Mitsubishi P93D/P95D version 0.05
D 06:09 +0200 [CGI] BACKEND=dnpds40\t# DNP DS40/DS80/DSRX1/DS620 version 0.91
D 06:09 +0200 [ -i ] # Query printer info
D 06:09 +0200 [ -I ] # Query sensor info
D 06:09 +0200 [ -k num ] # Set standby time (1-99 minutes, 0 disables)
D 06:09 +0200 [ -K num ] # Keep Media Status Across Power Cycles (1 on, 0 off)
D 06:09 +0200 [ -n ] # Query counters
D 06:09 +0200 [ -N A|B|M ] # Clear counter A/B/M
D 06:09 +0200 [ -p num ] # Set counter P
D 06:09 +0200 [ -R ] # Reset printer
D 06:09 +0200 [ -s ] # Query status
D 06:09 +0200 [ -x num ] # Set USB iSerialNumber Reporting (1 on, 0 off)
D 06:09 +0200 [ -X ] # Cancel current print job
D 06:09 +0200 [CGI] BACKEND=citizencw01\t# Citizen CW-01 version 0.12
D 06:09 +0200 [ -i ] # Query printer info
D 06:09 +0200 [ -s ] # Query status
D 06:09 +0200 [ -n ] # Query counters
D 06:09 +0200 [ -N A|B|M ] # Clear counter A/B/M
D 06:09 +0200 [cups-deviced] PID 2193 (ipps) exited with no errors.
D 06:09 +0200 [CGI] Flushed attributes...
D 06:09 +0200 [cups-deviced] Found device \"hp\"...
D 06:09 +0200 [cups-deviced] PID 2189 (hp) exited with no errors.
D 06:09 +0200 [Client 8] CGI data ready to be sent.
D 06:09 +0200 [Client 8] con->http=0x5622877dd850
D 06:09 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2185, file=12
D 06:09 +0200 [Client 8] Waiting for CGI data.
D 06:09 +0200 [Client 8] con->http=0x5622877dd850
D 06:09 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2185, file=12
D 06:09 +0200 [Client 8] Waiting for CGI data.
D 06:09 +0200 [cups-deviced] PID 2194 (serial) exited with no errors.
D 06:10 +0200 [CGI] libusb_get_device_list=13
I 06:10 +0200 Expiring subscriptions...
D 06:10 +0200 [Client 8] CGI data ready to be sent.
D 06:10 +0200 [CGI] Flushed attributes...
D 06:10 +0200 [cups-deviced] Found device \"usb://Brother/MFC-L2710DW%20series?serial=E78295F8N165572\"...
D 06:10 +0200 [Client 8] con->http=0x5622877dd850
D 06:10 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2185, file=12
D 06:10 +0200 [Client 8] Waiting for CGI data.
D 06:10 +0200 [Client 8] con->http=0x5622877dd850
D 06:10 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2185, file=12
D 06:10 +0200 [Client 8] Waiting for CGI data.
D 06:10 +0200 [cups-deviced] PID 2190 (usb) exited with no errors.
E 06:10 +0200 [cups-deviced] PID 2188 (gutenprint52+usb) stopped with status 1!
D 06:10 +0200 [Client 8] CGI data ready to be sent.
D 06:10 +0200 [CGI] Flushed attributes...
D 06:10 +0200 [cups-deviced] Found device \"hpfax\"...
D 06:10 +0200 [Client 8] con->http=0x5622877dd850
D 06:10 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2185, file=12
D 06:10 +0200 [Client 8] Waiting for CGI data.
D 06:10 +0200 [Client 8] con->http=0x5622877dd850
D 06:10 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2185, file=12
D 06:10 +0200 [Client 8] Waiting for CGI data.
D 06:10 +0200 [cups-deviced] PID 2192 (hpfax) exited with no errors.
D 06:11 +0200 [Client 8] CGI data ready to be sent.
I 06:11 +0200 Expiring subscriptions...
D 06:11 +0200 [Client 8] con->http=0x5622877dd850
D 06:11 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2185, file=12
D 06:11 +0200 [Client 8] Waiting for CGI data.
D 06:11 +0200 [Client 8] con->http=0x5622877dd850
D 06:11 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2185, file=12
D 06:11 +0200 [Client 8] Waiting for CGI data.
D 06:11 +0200 [Client 8] CGI data ready to be sent.
D 06:11 +0200 PID 2185 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D 06:11 +0200 [Client 8] con->http=0x5622877dd850
D 06:11 +0200 [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2185, file=12
D 06:11 +0200 [Client 8] Waiting for CGI data.
D 06:11 +0200 [Client 8] Sending 0-length chunk.
D 06:11 +0200 [Client 8] Flushing write buffer.
D 06:11 +0200 [Client 8] New state is HTTP_STATE_WAITING
D 06:11 +0200 [Client 8] Waiting for request.
D 06:11 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D 06:11 +0200 [Client 8] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 06:11 +0200 [Client 8] Closing connection.
D 06:11 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D 06:11 +0200 [CGI] PID 2198 (ippfind) was terminated normally with signal 0!
D 06:11 +0200 [CGI] PID 2199 (Post-processing) exited with no errors.
D 06:11 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D 06:11 +0200 [Client 9] Server address is "/var/run/cups/cups.sock".
D 06:11 +0200 [Client 9] Accepted from localhost (Domain)
D 06:11 +0200 [Client 9] Waiting for request.
D 06:11 +0200 [Client 9] POST / HTTP/1.1
D 06:11 +0200 cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D 06:11 +0200 [Client 9] Read: status=200, state=6
D 06:11 +0200 [Client 9] No authentication data provided.
D 06:11 +0200 [Client 9] 2.0 CUPS-Get-Printers 2
D 06:11 +0200 CUPS-Get-Printers
D 06:11 +0200 [Client 9] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D 06:11 +0200 [Client 9] Content-Length: 257
D 06:11 +0200 [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D 06:11 +0200 [Client 9] con->http=0x5622877dd850
D 06:11 +0200 [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=257, response=0x5622877dabc0(IPP_STATE_DATA), pipe_pid=0, file=-1
D 06:11 +0200 [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D 06:11 +0200 [Client 9] bytes=0, http_state=0, data_remaining=257
D 06:11 +0200 [Client 9] Flushing write buffer.
D 06:11 +0200 [Client 9] New state is HTTP_STATE_WAITING
D 06:11 +0200 [Client 9] Waiting for request.
D 06:11 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D 06:11 +0200 [Client 9] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D 06:11 +0200 [Client 9] Closing connection.
D 06:11 +0200 cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I 06:12 +0200 Expiring subscriptions...
I 06:40 +0200 Saving subscriptions.conf...
D 06:40 +0200 cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I 06:40 +0200 Expiring subscriptions...