1896er
Anmeldungsdatum: 11. Oktober 2016
Beiträge: 81
|
Hallo zusammen,
ich habe hier ein Dell XPS 13 9360. Hier läuft seit gestern Ubuntu 18.04. Vorher war Windows 10 drauf und das Druckerproblem gab es dort nicht. Der HP Envy 7640 scheint nur dann zu drucken, wenn er nicht vorher im Ruhemodus war. Er läuft mit HPLIP 3.17.10, ich habe auch schon den neuesten (3.19.6) installiert, es gab aber keine Veränderung des Problems. Wenn der Drucker schon im Ruhemodus ist, muss ich ihn aus- und wieder einschalten, dann druckt er. Befindet er sich bereits im Ruhemodus, zeigt der Rechner die Fehlermeldung "connecting-to-device". Diese Meldung kommt dann alle paar Sekunden - nach etwa 5 Minuten (!) wird dann gedruckt - immerhin... Wenn ich nun vorher den Drucker aus- und wieder einschalte, wird unmittelbar nach Aktivierung des Drucker-WLANs das Dokument gedruckt. Das hp-setup zeigt mir den Drucker übrigens gar nicht an (weder im Ruhemodus, noch davor!) Bei den Einstellungen ist er im Menü "Geräte" allerdings sofort angezeigt worden. Der WLAN-Bericht des HP zeigt übrigens keine Störungen an... Den Ruhemodus kann man leider nicht ganz deaktivieren. Nur von 5 bis 15 Minuten einstellen... Vielleicht hat jemand eine Idee. Gruß Florian
|
1896er
(Themenstarter)
Anmeldungsdatum: 11. Oktober 2016
Beiträge: 81
|
Also, die Zeit, bis der Drucker druckt, scheint zu variieren. Eben hat hat es "nur" etwa eine Minute gedauert, bis eine Verbindung hergestellt werden konnte und der Druck begann. In der Tat: Das WLAN-Signal ist am Drucker schwach. Das liegt an der Entfernung zum Router. Nur: Weder an einem MacBook noch an diesem Rechner, als er noch unter Win10 lief, gab es irgendwelche Verzögerungen. Das WLAN-Signal an den Rechnern ist jeweils gut. Unter hp-setup wird der Drucker übrigens konsequent nicht angezeigt. Ich verbuche die Sache jetzt mal unter "schwaches WLAN am Drucker" und versuche, mit der Verzögerung zu leben. Außer, es hat noch jemand eine Idee... Gruß Florian
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
1896er schrieb: Er läuft mit HPLIP 3.17.10, ich habe auch schon den neuesten (3.19.6) installiert
Wie hat du Installiert/Deinstalliert? Die Terminal Ausgaben von dpkg -l | egrep HP
hp-check -r bitte mal zeigen.
|
1896er
(Themenstarter)
Anmeldungsdatum: 11. Oktober 2016
Beiträge: 81
|
Ich habe gestern 18.04.3 nochmal ganz neu aufgesetzt. Das Problem besteht immer noch. 3.17.10 ist der "mitgelieferte" HPLIP-Treiber. Dennoch hier mal die Ausgaben: dpkg -l | egrep HP
ii hplip 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging System (HPLIP)
ii hplip-data 3.17.10+repack0-5 all HP Linux Printing and Imaging - data files
ii hplip-gui 3.17.10+repack0-5 all HP Linux Printing and Imaging - GUI utilities (Qt-based)
ii libhpmud0:amd64 3.17.10+repack0-5 amd64 HP Multi-Point Transport Driver (hpmud) run-time libraries
ii libsane-hpaio:amd64 3.17.10+repack0-5 amd64 HP SANE backend for multi-function peripherals
ii printer-driver-hpcups 3.17.10+repack0-5 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii printer-driver-pnm2ppa 1.13+nondbs-0ubuntu6 amd64 printer driver for HP-GDI printers
ii printer-driver-postscript-hp 3.17.10+repack0-5 all HP Printers PostScript Descriptions
ii printer-driver-pxljr 1.4+repack0-5 amd64 printer driver for HP Color LaserJet 35xx/36xx
|
1896er
(Themenstarter)
Anmeldungsdatum: 11. Oktober 2016
Beiträge: 81
|
Und: hp-check -r
Saving output in log file: /home/florian/hp-check.log
HP Linux Imaging and Printing System (ver. 3.17.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.15.0-55-generic #60-Ubuntu SMP Tue Jul 2 18:22:20 UTC 2019 GNU/Linux
Host: florian-XPS-13-9360
Proc: 4.15.0-55-generic #60-Ubuntu SMP Tue Jul 2 18:22:20 UTC 2019 GNU/Linux
Distribution: 12 18.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.17.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.17.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.17.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 08/09/19 10:54:53
version = 3.17.10
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.2 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.19.4 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
error: libpthread libpthread - POSIX threads library REQUIRED - b'2.27' MISSING 'libpthread needs to be installed'
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.8 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK -
python3-xml Python XML libraries REQUIRED - 2.2.5 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.8 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
error: make make - GNU make utility to maintain groups of programs REQUIRED 3.0 - MISSING 'make needs to be installed'
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.17.10 OK -
hpmudext IO-Extension REQUIRED - 3.17.10 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
ENVY-7640
---------
Type: Unknown
Device URI: dnssd://HP%20ENVY%207640%20series%20%5B03BCB4%5D._ipp._tcp.local/?uuid=1c852a4d-b800-1f08-abcd-f430b903bcb4
PPD: /etc/cups/ppd/ENVY-7640.ppd
warning: Failed to read /etc/cups/ppd/ENVY-7640.ppd ppd file
PPD Description:
Printer status: Drucker ENVY-7640 ist im Leerlauf. Aktiviert seit Fr 09 Aug 2019 09:12:13 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 17
Total Warnings: 1
Done.
florian@florian-XPS-13-9360:~$
|
1896er
(Themenstarter)
Anmeldungsdatum: 11. Oktober 2016
Beiträge: 81
|
Das einzige, was ich selbst gestern nachträglich zum "sauberen" 18.04.3 installiert habe, ist dieses HPLIP "GUI-Modul". Ansonsten haben wir es hier also mit einem völlig frischen 18.04.3 zu tun. Schon mal im Voraus ein Dankeschön für die Unterstützung! Gruß Florian
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Installiere erst mal nur was bemängelt wird. sudo apt install gtk2-engines-pixbuf xsane python3-dbus.mainloop.qt Neustart. Zeige danach mal id sowie nochmal hp-check -r
|
1896er
(Themenstarter)
Anmeldungsdatum: 11. Oktober 2016
Beiträge: 81
|
id
uid=1000(florian) gid=1000(florian) Gruppen=1000(florian),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),116(lpadmin),126(sambashare)
hp-check -r
Saving output in log file: /home/florian/hp-check.log
HP Linux Imaging and Printing System (ver. 3.17.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
\Gtk-Message: 11:13:11.072: Failed to load module "canberra-gtk-module"
warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.15.0-55-generic #60-Ubuntu SMP Tue Jul 2 18:22:20 UTC 2019 GNU/Linux
Host: florian-XPS-13-9360
Proc: 4.15.0-55-generic #60-Ubuntu SMP Tue Jul 2 18:22:20 UTC 2019 GNU/Linux
Distribution: 12 18.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.17.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.17.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.17.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 08/09/19 11:13:11
version = 3.17.10
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK -
Gtk-Message: 11:13:12.549: Failed to load module "canberra-gtk-module"
Gtk-Message: 11:13:12.568: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.2 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.19.4 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
error: libpthread libpthread - POSIX threads library REQUIRED - b'2.27' MISSING 'libpthread needs to be installed'
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.8 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - INCOMPAT 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK -
python3-xml Python XML libraries REQUIRED - 2.2.5 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.8 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
error: make make - GNU make utility to maintain groups of programs REQUIRED 3.0 - MISSING 'make needs to be installed'
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.17.10 OK -
hpmudext IO-Extension REQUIRED - 3.17.10 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
ENVY-7640
---------
Type: Unknown
Device URI: dnssd://HP%20ENVY%207640%20series%20%5B03BCB4%5D._ipp._tcp.local/?uuid=1c852a4d-b800-1f08-abcd-f430b903bcb4
PPD: /etc/cups/ppd/ENVY-7640.ppd
warning: Failed to read /etc/cups/ppd/ENVY-7640.ppd ppd file
PPD Description:
Printer status: Drucker ENVY-7640 ist im Leerlauf. Aktiviert seit Fr 09 Aug 2019 09:12:13 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 16
Total Warnings: 1
Done.
florian@florian-XPS-13-9360:~$
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Eines ist immer noch da.Zeige mal dpkg -l python3-dbus.mainloop.qt Dann mal sudo adduser $USER lp Danach den HP aus system-config-printer mal Löschen. Dann Neustart und den HP einrichten hp-setup -i
|
1896er
(Themenstarter)
Anmeldungsdatum: 11. Oktober 2016
Beiträge: 81
|
dpkg -l python3-dbus.mainloop.qt
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
||/ Name Version Architektur Beschreibung
+++-==============-============-============-=================================
ii python3-dbus.m 4.12.1+dfsg- amd64 D-Bus Support for PyQt4 with Pyth
sudo adduser $USER lp
[sudo] Passwort für florian:
Benutzer »florian« wird der Gruppe »lp« hinzugefügt …
Benutzer florian wird zur Gruppe lp hinzugefügt.
Fertig.
Soweit Teil 1... Fortsetzung folgt...
|
1896er
(Themenstarter)
Anmeldungsdatum: 11. Oktober 2016
Beiträge: 81
|
So, Rechner neu gestartet. Drucker auch. WLAN am Drucker aktiv und verbunden. hp-setup -i
HP Linux Imaging and Printing System (ver. 3.17.10)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
2 par Parallel Port (LPT:)
Enter number 0...2 for connection type (q=quit, enter=usb*) ? 1
Using connection type: net
error: No device selected/specified or that supports this functionality.
Ich könnte nun (wieder) über das Menü "Einstellungen" - Geräte - Drucker gehen, und den Drucker hinzufügen... Ich habe das jetzt noch nicht gemacht.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Führe noch aus sudo apt install build-essential libtool python3-pyqt5 gcc make zeige auch hiervon die Terminal Ausgabe.Dann den HP mal hinzufügen.Ausgabe von hp-check -r ebenfalls wieder zeigen.
|
1896er
(Themenstarter)
Anmeldungsdatum: 11. Oktober 2016
Beiträge: 81
|
sudo apt install build-essential libtool python3-pyqt5 gcc make
[sudo] Passwort für florian:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
python3-pyqt5 ist schon die neueste Version (5.10.1+dfsg-1ubuntu2).
python3-pyqt5 wurde als manuell installiert festgelegt.
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
libdrm-dev libgl1-mesa-dev libgles1 libglu1-mesa-dev libglvnd-core-dev
libglvnd-dev libmng2 libmysqlclient20 libopengl0 libpthread-stubs0-dev
libqt4-dbus libqt4-declarative libqt4-designer libqt4-dev libqt4-dev-bin
libqt4-help libqt4-network libqt4-opengl libqt4-opengl-dev libqt4-qt3support
libqt4-script libqt4-scripttools libqt4-sql libqt4-sql-mysql libqt4-svg
libqt4-test libqt4-xml libqt4-xmlpatterns libqtdbus4 libqtgui4 libx11-dev
libx11-doc libx11-xcb-dev libxau-dev libxcb-dri2-0-dev libxcb-dri3-dev
libxcb-glx0-dev libxcb-present-dev libxcb-randr0-dev libxcb-render0-dev
libxcb-shape0-dev libxcb-sync-dev libxcb-xfixes0-dev libxcb1-dev
libxdamage-dev libxdmcp-dev libxext-dev libxfixes-dev libxshmfence-dev
libxxf86vm-dev mesa-common-dev mysql-common qdbus qt-at-spi
qt4-linguist-tools qt4-qmake qtchooser x11proto-core-dev x11proto-damage-dev
x11proto-dev x11proto-fixes-dev x11proto-xext-dev x11proto-xf86vidmode-dev
xorg-sgml-doctools xtrans-dev
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
Die folgenden zusätzlichen Pakete werden installiert:
autotools-dev dpkg-dev fakeroot g++ g++-7 gcc-7 libalgorithm-diff-perl
libalgorithm-diff-xs-perl libalgorithm-merge-perl libasan4 libatomic1
libc-dev-bin libc6-dev libcilkrts5 libfakeroot libgcc-7-dev libitm1 liblsan0
libltdl-dev libmpx2 libquadmath0 libstdc++-7-dev libtsan0 libubsan0
linux-libc-dev manpages-dev
Vorgeschlagene Pakete:
debian-keyring g++-multilib g++-7-multilib gcc-7-doc libstdc++6-7-dbg
gcc-multilib autoconf automake flex bison gcc-doc gcc-7-multilib
gcc-7-locales libgcc1-dbg libgomp1-dbg libitm1-dbg libatomic1-dbg
libasan4-dbg liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg
libmpx2-dbg libquadmath0-dbg glibc-doc libtool-doc libstdc++-7-doc automaken
gfortran | fortran95-compiler gcj-jdk make-doc
Die folgenden NEUEN Pakete werden installiert:
autotools-dev build-essential dpkg-dev fakeroot g++ g++-7 gcc gcc-7
libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl
libasan4 libatomic1 libc-dev-bin libc6-dev libcilkrts5 libfakeroot
libgcc-7-dev libitm1 liblsan0 libltdl-dev libmpx2 libquadmath0
libstdc++-7-dev libtool libtsan0 libubsan0 linux-libc-dev make manpages-dev
0 aktualisiert, 30 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 27,2 MB an Archiven heruntergeladen werden.
Nach dieser Operation werden 119 MB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] j
Holen:1 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 autotools-dev all 20180224.1 [39,6 kB]
Holen:2 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 libc-dev-bin amd64 2.27-3ubuntu1 [71,8 kB]
Holen:3 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 linux-libc-dev amd64 4.15.0-55.60 [991 kB]
Holen:4 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 libc6-dev amd64 2.27-3ubuntu1 [2.587 kB]
Holen:5 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libitm1 amd64 8.3.0-6ubuntu1~18.04.1 [28,0 kB]
Holen:6 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libatomic1 amd64 8.3.0-6ubuntu1~18.04.1 [9.184 B]
Holen:7 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libasan4 amd64 7.4.0-1ubuntu1~18.04.1 [359 kB]
Holen:8 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 liblsan0 amd64 8.3.0-6ubuntu1~18.04.1 [133 kB]
Holen:9 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libtsan0 amd64 8.3.0-6ubuntu1~18.04.1 [288 kB]
Holen:10 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libubsan0 amd64 7.4.0-1ubuntu1~18.04.1 [126 kB]
Holen:11 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libcilkrts5 amd64 7.4.0-1ubuntu1~18.04.1 [42,5 kB]
Holen:12 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libmpx2 amd64 8.3.0-6ubuntu1~18.04.1 [11,6 kB]
Holen:13 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libquadmath0 amd64 8.3.0-6ubuntu1~18.04.1 [133 kB]
Holen:14 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libgcc-7-dev amd64 7.4.0-1ubuntu1~18.04.1 [2.381 kB]
Holen:15 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 gcc-7 amd64 7.4.0-1ubuntu1~18.04.1 [7.463 kB]
Holen:16 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 gcc amd64 4:7.4.0-1ubuntu2.3 [5.184 B]
Holen:17 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libstdc++-7-dev amd64 7.4.0-1ubuntu1~18.04.1 [1.468 kB]
Holen:18 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 g++-7 amd64 7.4.0-1ubuntu1~18.04.1 [7.574 kB]
Holen:19 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 g++ amd64 4:7.4.0-1ubuntu2.3 [1.568 B]
Holen:20 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 make amd64 4.1-9.1ubuntu1 [154 kB]
Holen:21 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 dpkg-dev all 1.19.0.5ubuntu2.1 [608 kB]
Holen:22 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 build-essential amd64 12.4ubuntu1 [4.758 B]
Holen:23 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 libfakeroot amd64 1.22-2ubuntu1 [25,9 kB]
Holen:24 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 fakeroot amd64 1.22-2ubuntu1 [62,3 kB]
Holen:25 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 libalgorithm-diff-perl all 1.19.03-1 [47,6 kB]
Holen:26 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 libalgorithm-diff-xs-perl amd64 0.04-5 [11,1 kB]
Holen:27 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 libalgorithm-merge-perl all 0.08-3 [12,0 kB]
Holen:28 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 libltdl-dev amd64 2.4.6-2 [162 kB]
Holen:29 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 libtool all 2.4.6-2 [194 kB]
Holen:30 http://de.archive.ubuntu.com/ubuntu bionic/main amd64 manpages-dev all 4.15-1 [2.217 kB]
Es wurden 27,2 MB in 29 s geholt (948 kB/s).
Vormals nicht ausgewähltes Paket autotools-dev wird gewählt.
(Lese Datenbank ... 173321 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../00-autotools-dev_20180224.1_all.deb ...
Entpacken von autotools-dev (20180224.1) ...
Vormals nicht ausgewähltes Paket libc-dev-bin wird gewählt.
Vorbereitung zum Entpacken von .../01-libc-dev-bin_2.27-3ubuntu1_amd64.deb ...
Entpacken von libc-dev-bin (2.27-3ubuntu1) ...
Vormals nicht ausgewähltes Paket linux-libc-dev:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../02-linux-libc-dev_4.15.0-55.60_amd64.deb ...
Entpacken von linux-libc-dev:amd64 (4.15.0-55.60) ...
Vormals nicht ausgewähltes Paket libc6-dev:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../03-libc6-dev_2.27-3ubuntu1_amd64.deb ...
Entpacken von libc6-dev:amd64 (2.27-3ubuntu1) ...
Vormals nicht ausgewähltes Paket libitm1:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../04-libitm1_8.3.0-6ubuntu1~18.04.1_amd64.deb ...
Entpacken von libitm1:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket libatomic1:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../05-libatomic1_8.3.0-6ubuntu1~18.04.1_amd64.deb ...
Entpacken von libatomic1:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket libasan4:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../06-libasan4_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Entpacken von libasan4:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket liblsan0:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../07-liblsan0_8.3.0-6ubuntu1~18.04.1_amd64.deb ...
Entpacken von liblsan0:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket libtsan0:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../08-libtsan0_8.3.0-6ubuntu1~18.04.1_amd64.deb ...
Entpacken von libtsan0:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket libubsan0:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../09-libubsan0_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Entpacken von libubsan0:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket libcilkrts5:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../10-libcilkrts5_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Entpacken von libcilkrts5:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket libmpx2:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../11-libmpx2_8.3.0-6ubuntu1~18.04.1_amd64.deb ...
Entpacken von libmpx2:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket libquadmath0:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../12-libquadmath0_8.3.0-6ubuntu1~18.04.1_amd64.deb ...
Entpacken von libquadmath0:amd64 (8.3.0-6ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket libgcc-7-dev:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../13-libgcc-7-dev_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Entpacken von libgcc-7-dev:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket gcc-7 wird gewählt.
Vorbereitung zum Entpacken von .../14-gcc-7_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Entpacken von gcc-7 (7.4.0-1ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket gcc wird gewählt.
Vorbereitung zum Entpacken von .../15-gcc_4%3a7.4.0-1ubuntu2.3_amd64.deb ...
Entpacken von gcc (4:7.4.0-1ubuntu2.3) ...
Vormals nicht ausgewähltes Paket libstdc++-7-dev:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../16-libstdc++-7-dev_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Entpacken von libstdc++-7-dev:amd64 (7.4.0-1ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket g++-7 wird gewählt.
Vorbereitung zum Entpacken von .../17-g++-7_7.4.0-1ubuntu1~18.04.1_amd64.deb ...
Entpacken von g++-7 (7.4.0-1ubuntu1~18.04.1) ...
Vormals nicht ausgewähltes Paket g++ wird gewählt.
Vorbereitung zum Entpacken von .../18-g++_4%3a7.4.0-1ubuntu2.3_amd64.deb ...
Entpacken von g++ (4:7.4.0-1ubuntu2.3) ...
Vormals nicht ausgewähltes Paket make wird gewählt.
Vorbereitung zum Entpacken von .../19-make_4.1-9.1ubuntu1_amd64.deb ...
Entpacken von make (4.1-9.1ubuntu1) ...
Vormals nicht ausgewähltes Paket dpkg-dev wird gewählt.
Vorbereitung zum Entpacken von .../20-dpkg-dev_1.19.0.5ubuntu2.1_all.deb ...
Entpacken von dpkg-dev (1.19.0.5ubuntu2.1) ...
Vormals nicht ausgewähltes Paket build-essential wird gewählt.
Vorbereitung zum Entpacken von .../21-build-essential_12.4ubuntu1_amd64.deb ...
Entpacken von build-essential (12.4ubuntu1) ...
Vormals nicht ausgewähltes Paket libfakeroot:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../22-libfakeroot_1.22-2ubuntu1_amd64.deb ...
Entpacken von libfakeroot:amd64 (1.22-2ubuntu1) ...
Vormals nicht ausgewähltes Paket fakeroot wird gewählt.
Vorbereitung zum Entpacken von .../23-fakeroot_1.22-2ubuntu1_amd64.deb ...
Entpacken von fakeroot (1.22-2ubuntu1) ...
Vormals nicht ausgewähltes Paket libalgorithm-diff-perl wird gewählt.
Vorbereitung zum Entpacken von .../24-libalgorithm-diff-perl_1.19.03-1_all.deb ...
Entpacken von libalgorithm-diff-perl (1.19.03-1) ...
Vormals nicht ausgewähltes Paket libalgorithm-diff-xs-perl wird gewählt.
Vorbereitung zum Entpacken von .../25-libalgorithm-diff-xs-perl_0.04-5_amd64.deb ...
Entpacken von libalgorithm-diff-xs-perl (0.04-5) ...
Vormals nicht ausgewähltes Paket libalgorithm-merge-perl wird gewählt.
Vorbereitung zum Entpacken von .../26-libalgorithm-merge-perl_0.08-3_all.deb ...
Entpacken von libalgorithm-merge-perl (0.08-3) ...
Vormals nicht ausgewähltes Paket libltdl-dev:amd64 wird gewählt.
Vorbereitung zum Entpacken von .../27-libltdl-dev_2.4.6-2_amd64.deb ...
Entpacken von libltdl-dev:amd64 (2.4.6-2) ...
Vormals nicht ausgewähltes Paket libtool wird gewählt.
Vorbereitung zum Entpacken von .../28-libtool_2.4.6-2_all.deb ...
Entpacken von libtool (2.4.6-2) ...
Vormals nicht ausgewähltes Paket manpages-dev wird gewählt.
Vorbereitung zum Entpacken von .../29-manpages-dev_4.15-1_all.deb ...
Entpacken von manpages-dev (4.15-1) ...
libquadmath0:amd64 (8.3.0-6ubuntu1~18.04.1) wird eingerichtet ...
libatomic1:amd64 (8.3.0-6ubuntu1~18.04.1) wird eingerichtet ...
make (4.1-9.1ubuntu1) wird eingerichtet ...
libltdl-dev:amd64 (2.4.6-2) wird eingerichtet ...
libasan4:amd64 (7.4.0-1ubuntu1~18.04.1) wird eingerichtet ...
libcilkrts5:amd64 (7.4.0-1ubuntu1~18.04.1) wird eingerichtet ...
libubsan0:amd64 (7.4.0-1ubuntu1~18.04.1) wird eingerichtet ...
libtsan0:amd64 (8.3.0-6ubuntu1~18.04.1) wird eingerichtet ...
linux-libc-dev:amd64 (4.15.0-55.60) wird eingerichtet ...
liblsan0:amd64 (8.3.0-6ubuntu1~18.04.1) wird eingerichtet ...
libmpx2:amd64 (8.3.0-6ubuntu1~18.04.1) wird eingerichtet ...
dpkg-dev (1.19.0.5ubuntu2.1) wird eingerichtet ...
Trigger für libc-bin (2.27-3ubuntu1) werden verarbeitet ...
autotools-dev (20180224.1) wird eingerichtet ...
libfakeroot:amd64 (1.22-2ubuntu1) wird eingerichtet ...
libalgorithm-diff-perl (1.19.03-1) wird eingerichtet ...
Trigger für man-db (2.8.3-2ubuntu0.1) werden verarbeitet ...
libc-dev-bin (2.27-3ubuntu1) wird eingerichtet ...
manpages-dev (4.15-1) wird eingerichtet ...
libc6-dev:amd64 (2.27-3ubuntu1) wird eingerichtet ...
libitm1:amd64 (8.3.0-6ubuntu1~18.04.1) wird eingerichtet ...
fakeroot (1.22-2ubuntu1) wird eingerichtet ...
update-alternatives: /usr/bin/fakeroot-sysv wird verwendet, um /usr/bin/fakeroot (fakeroot) im automatischen Modus bereitzustellen
libgcc-7-dev:amd64 (7.4.0-1ubuntu1~18.04.1) wird eingerichtet ...
libstdc++-7-dev:amd64 (7.4.0-1ubuntu1~18.04.1) wird eingerichtet ...
libalgorithm-merge-perl (0.08-3) wird eingerichtet ...
libalgorithm-diff-xs-perl (0.04-5) wird eingerichtet ...
gcc-7 (7.4.0-1ubuntu1~18.04.1) wird eingerichtet ...
g++-7 (7.4.0-1ubuntu1~18.04.1) wird eingerichtet ...
gcc (4:7.4.0-1ubuntu2.3) wird eingerichtet ...
g++ (4:7.4.0-1ubuntu2.3) wird eingerichtet ...
update-alternatives: /usr/bin/g++ wird verwendet, um /usr/bin/c++ (c++) im automatischen Modus bereitzustellen
libtool (2.4.6-2) wird eingerichtet ...
build-essential (12.4ubuntu1) wird eingerichtet ...
Trigger für libc-bin (2.27-3ubuntu1) werden verarbeitet ...
florian@florian-XPS-13-9360:~$
Wieder Teil 1...
|
1896er
(Themenstarter)
Anmeldungsdatum: 11. Oktober 2016
Beiträge: 81
|
Beim Hinzufügen wurden mir 2 Drucker angeboten (Envy 7640). Ich habe den hinzugefügt, der eine IP-Adresse mit angezeigt hat. hp-check -r
Saving output in log file: /home/florian/hp-check.log
HP Linux Imaging and Printing System (ver. 3.17.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
-Gtk-Message: 12:00:30.319: Failed to load module "canberra-gtk-module"
warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.15.0-55-generic #60-Ubuntu SMP Tue Jul 2 18:22:20 UTC 2019 GNU/Linux
Host: florian-XPS-13-9360
Proc: 4.15.0-55-generic #60-Ubuntu SMP Tue Jul 2 18:22:20 UTC 2019 GNU/Linux
Distribution: 12 18.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.17.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.17.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.17.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 08/09/19 12:00:31
version = 3.17.10
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK -
Gtk-Message: 12:00:31.875: Failed to load module "canberra-gtk-module"
Gtk-Message: 12:00:31.894: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.2 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.19.4 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.27' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.8 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - INCOMPAT 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK -
python3-xml Python XML libraries REQUIRED - 2.2.5 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.8 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.4.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.17.10 OK -
hpmudext IO-Extension REQUIRED - 3.17.10 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
ENVY-7640
---------
Type: Unknown
Device URI: socket://192.168.178.32:9100
PPD: /etc/cups/ppd/ENVY-7640.ppd
PPD Description: HP Envy 7640 Series, hpcups 3.17.10
Printer status: Drucker ENVY-7640 ist im Leerlauf. Aktiviert seit Fr 09 Aug 2019 11:58:19 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 13
Total Warnings: 1
Done.
florian@florian-XPS-13-9360:~$
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Das war richtig. Das was meiner Meinung nach Wichtig war stimmt jetzt Device URI: socket://192.168.178.32:9100
PPD: /etc/cups/ppd/ENVY-7640.ppd
PPD Description: HP Envy 7640 Series, hpcups 3.17.10 HP gibt manchmal Warnungen/erros raus die keine sind. Teste es nun erst mal.Bei Misserfolg sehen wir weiter. Bin erst wieder gegen 21 Uhr hier. Gruß Stephan
|