ubuntuusers.de

hplip

hp-check -r
$ hp-check -r
Saving output in log file: /home/ich/hp-check.log

HP Linux Imaging and Printing System (ver. 3.17.10)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Check types:                                                                    
a. EXTERNALDEP - External Dependencies                                          
b. GENERALDEP - General Dependencies (required both at compile and run time)    
c. COMPILEDEP - Compile time Dependencies                                       
d. [All are run-time checks]                                                    
PYEXT SCANCONF QUEUES PERMISSION                                                

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

 Kernel: 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC 2019 GNU/Linux
 Host: T500
 Proc: 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC 2019 GNU/Linux
 Distribution: 12 18.04
 Bitness: 64 bit

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.17.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro  18.04 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.17.10

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.17.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no

Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory

Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 10/26/19 12:45:35
version = 3.17.10

 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

-------------------------
| External Dependencies |
-------------------------

 error: cups          CUPS - Common Unix Printing System                           REQUIRED        1.1             -               INCOMPAT   'CUPS may not be installed or not running'
 gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.26            OK         -
 xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.999           OK         -
 scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.27          OK         -
 dbus                 DBus - Message bus system                                    REQUIRED        -               1.12.2          OK         -
 policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.105           OK         -
 network              network -wget                                                OPTIONAL        -               1.19.4          OK         -
 avahi-utils          avahi-utils                                                  OPTIONAL        -               0.7             OK         -

------------------------
| General Dependencies |
------------------------

 error: libjpeg       libjpeg - JPEG library                                       REQUIRED        -               -               MISSING    'libjpeg needs to be installed'
 error: cups-devel    CUPS devel- Common Unix Printing System development files    REQUIRED        -               -               MISSING    'cups-devel needs to be installed'
 error: cups-image    CUPS image - CUPS image development files                    REQUIRED        -               -               MISSING    'cups-image needs to be installed'
 libpthread           libpthread - POSIX threads library                           REQUIRED        -               b'2.27'         OK         -
 error: libusb        libusb - USB library                                         REQUIRED        -               1.0             MISSING    'libusb needs to be installed'
 sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
 error: sane-devel    SANE - Scanning library development files                    REQUIRED        -               -               MISSING    'sane-devel needs to be installed'
 error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           -               MISSING    'libnetsnmp-devel needs to be installed'
 error: libcrypto     libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.1           MISSING    'libcrypto needs to be installed'
 python3X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             3.6.8           OK         -
 python3-notify2      Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               OK         -
 error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4                         OPTIONAL        4.0             -               MISSING    'python3-pyqt4-dbus needs to be installed'
 error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)         REQUIRED        4.0             -               MISSING    'python3-pyqt4 needs to be installed'
 python3-dbus         Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.6           OK         -
 python3-xml          Python XML libraries                                         REQUIRED        -               2.2.5           OK         -
 error: python3-devel Python devel - Python development files                      REQUIRED        2.2             3.6.8           MISSING    'python3-devel needs to be installed'
 python3-pil          PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               1.1.7           OK         -
 python3-reportlab    Reportlab - PDF library for Python                           OPTIONAL        2.0             3.4.0           OK         -

--------------
| COMPILEDEP |
--------------

 error: libtool       libtool - Library building support services                  REQUIRED        -               -               MISSING    'libtool needs to be installed'
 gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               7.4.0           OK         -
 make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.1             OK         -

---------------------
| Python Extentions |
---------------------

 cupsext              CUPS-Extension                                               REQUIRED        -               3.17.10         OK         -
 hpmudext             IO-Extension                                                 REQUIRED        -               3.17.10         OK         -

----------------------
| Scan Configuration |
----------------------

'/etc/sane.d/dll.d/hpaio' not found.
 hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.17.10         OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension                                          REQUIRED        -               3.17.10         OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model                  
  --------------------------------  -----------------------
  hp:/usb/hp_LaserJet_1320_series?  HP LaserJet 1320 series
  serial=00CNHW55TGZ5                                      

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Canon-MX880-3.50-1_FRITZ!Box
----------------------------
Type: Unknown
Device URI: socket://fritz.box:9100
PPD: /etc/cups/ppd/Canon-MX880-3.50-1_FRITZ!Box.ppd
PPD Description: Canon MX880 series Ver.3.50
Printer status: Drucker Canon-MX880-3.50-1_FRITZ!Box ist im Leerlauf.  Aktiviert seit So 23 Sep 2018 04:08:10 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

Canon-MX880-3.50-1_USB
----------------------
Type: Unknown
Device URI: cnijusb:/dev/usb/lp0
PPD: /etc/cups/ppd/Canon-MX880-3.50-1_USB.ppd
PPD Description: Canon MX880 series Ver.3.50
Printer status: Drucker Canon-MX880-3.50-1_USB ist im Leerlauf.  Aktiviert seit So 23 Sep 2018 04:00:16 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

Canon-MX880-3.90_FRITZ!Box
--------------------------
Type: Unknown
Device URI: socket://fritz.box:9100
PPD: /etc/cups/ppd/Canon-MX880-3.90_FRITZ!Box.ppd
PPD Description: Canon MX880 series Ver.3.90
Printer status: Drucker Canon-MX880-3.90_FRITZ!Box ist im Leerlauf.  Aktiviert seit Do 08 Nov 2018 14:55:34 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

Canon-MX880-3.90_USB
--------------------
Type: Unknown
Device URI: usb://Canon/MX880%20series?serial=10283A&interface=1
PPD: /etc/cups/ppd/Canon-MX880-3.90_USB.ppd
PPD Description: Canon MX880 series Ver.3.90
Printer status: Drucker Canon-MX880-3.90_USB ist im Leerlauf.  Aktiviert seit So 23 Sep 2018 02:49:32 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

Epson-WF-2630_USB
-----------------
Type: Unknown
Device URI: usb://EPSON/WF-2630%20Series?serial=554D43593237333652&interface=1
PPD: /etc/cups/ppd/Epson-WF-2630_USB.ppd
PPD Description: Epson WF-2530 Series - epson-inkjet-printer-escpr 1.6.33-1lsb3.2 (Seiko Epson Corporation LSB 3.2)
Printer status: Drucker Epson-WF-2630_USB ist im Leerlauf.  Aktiviert seit Do 13 Jun 2019 23:44:31 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

HP-LaserJet-1320_pxlmono
------------------------
Type: Unknown
Device URI: usb://HP/LaserJet%201320%20series?serial=00CNHW55TGZ5
PPD: /etc/cups/ppd/HP-LaserJet-1320_pxlmono.ppd
PPD Description: HP LaserJet 1320 Foomatic/pxlmono (recommended)
Printer status: Drucker HP-LaserJet-1320_pxlmono ist im Leerlauf.  Aktiviert seit Sa 26 Okt 2019 11:49:38 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

MX880-series_FRITZ!Box
----------------------
Type: Unknown
Device URI: socket://fritz.box:9100
PPD: /etc/cups/ppd/MX880-series_FRITZ!Box.ppd
PPD Description: Canon MX880 series - CUPS+Gutenprint v5.2.13
Printer status: Drucker MX880-series_FRITZ!Box ist im Leerlauf.  Aktiviert seit So 23 Sep 2018 04:10:31 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

MX880-series_USB
----------------
Type: Unknown
Device URI: usb://Canon/MX880%20series?serial=10283A&interface=1
PPD: /etc/cups/ppd/MX880-series_USB.ppd
PPD Description: Canon MX880 series - CUPS+Gutenprint v5.2.13
Printer status: Drucker MX880-series_USB ist im Leerlauf.  Aktiviert seit So 23 Sep 2018 02:06:02 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

--------------
| PERMISSION |
--------------

USB             None                           Required        -        -        OK       Node:'/dev/bus/usb/006/004' Perm:'  root  lp rw- rw- rw- rw- r--'

-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible 
error: 'libjpeg-dev' package is missing/incompatible 
error: 'libcups2-dev' package is missing/incompatible 
error: 'cups-bsd' package is missing/incompatible 
error: 'cups-client' package is missing/incompatible 
error: 'libcupsimage2-dev' package is missing/incompatible 
error: 'libusb-1.0.0-dev' package is missing/incompatible 
error: 'libsane-dev' package is missing/incompatible 
error: 'libsnmp-dev' package is missing/incompatible 
error: 'snmp-mibs-downloader' package is missing/incompatible 
error: 'openssl' package is missing/incompatible 
error: 'python3-pyqt4' package is missing/incompatible 
error: 'gtk2-engines-pixbuf' package is missing/incompatible 
error: 'python3-dev' package is missing/incompatible 
error: 'libtool' package is missing/incompatible 
error: 'libtool-bin' package is missing/incompatible 

Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible 

Total Errors: 12
Total Warnings: 8

Done.
USB             None                           Required        -        -        OK       Node:'/dev/bus/usb/006/004' Perm:'  root  lp rw- rw- rw- rw- r--'
$ hp-check -r
Saving output in log file: /home/ich/hp-check.log

HP Linux Imaging and Printing System (ver. 3.17.10)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Check types:                                                                    
a. EXTERNALDEP - External Dependencies                                          
b. GENERALDEP - General Dependencies (required both at compile and run time)    
c. COMPILEDEP - Compile time Dependencies                                       
d. [All are run-time checks]                                                    
PYEXT SCANCONF QUEUES PERMISSION                                                

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

 Kernel: 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC 2019 GNU/Linux
 Host: T500
 Proc: 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC 2019 GNU/Linux
 Distribution: 12 18.04
 Bitness: 64 bit

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.17.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro  18.04 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.17.10

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.17.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no

Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory

Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 10/26/19 13:05:53
version = 3.17.10

 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

-------------------------
| External Dependencies |
-------------------------

 error: cups          CUPS - Common Unix Printing System                           REQUIRED        1.1             -               INCOMPAT   'CUPS may not be installed or not running'
 gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.26            OK         -
 xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.999           OK         -
 scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.27          OK         -
 dbus                 DBus - Message bus system                                    REQUIRED        -               1.12.2          OK         -
 policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.105           OK         -
 network              network -wget                                                OPTIONAL        -               1.19.4          OK         -
 avahi-utils          avahi-utils                                                  OPTIONAL        -               0.7             OK         -

------------------------
| General Dependencies |
------------------------

 error: libjpeg       libjpeg - JPEG library                                       REQUIRED        -               -               MISSING    'libjpeg needs to be installed'
 error: cups-devel    CUPS devel- Common Unix Printing System development files    REQUIRED        -               -               MISSING    'cups-devel needs to be installed'
 error: cups-image    CUPS image - CUPS image development files                    REQUIRED        -               -               MISSING    'cups-image needs to be installed'
 libpthread           libpthread - POSIX threads library                           REQUIRED        -               b'2.27'         OK         -
 error: libusb        libusb - USB library                                         REQUIRED        -               1.0             MISSING    'libusb needs to be installed'
 sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
 error: sane-devel    SANE - Scanning library development files                    REQUIRED        -               -               MISSING    'sane-devel needs to be installed'
 error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           -               MISSING    'libnetsnmp-devel needs to be installed'
 error: libcrypto     libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.1           MISSING    'libcrypto needs to be installed'
 python3X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             3.6.8           OK         -
 python3-notify2      Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               OK         -
 error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4                         OPTIONAL        4.0             -               MISSING    'python3-pyqt4-dbus needs to be installed'
 error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)         REQUIRED        4.0             -               MISSING    'python3-pyqt4 needs to be installed'
 python3-dbus         Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.6           OK         -
 python3-xml          Python XML libraries                                         REQUIRED        -               2.2.5           OK         -
 error: python3-devel Python devel - Python development files                      REQUIRED        2.2             3.6.8           MISSING    'python3-devel needs to be installed'
 python3-pil          PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               1.1.7           OK         -
 python3-reportlab    Reportlab - PDF library for Python                           OPTIONAL        2.0             3.4.0           OK         -

--------------
| COMPILEDEP |
--------------

 error: libtool       libtool - Library building support services                  REQUIRED        -               -               MISSING    'libtool needs to be installed'
 gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               7.4.0           OK         -
 make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.1             OK         -

---------------------
| Python Extentions |
---------------------

 cupsext              CUPS-Extension                                               REQUIRED        -               3.17.10         OK         -
 hpmudext             IO-Extension                                                 REQUIRED        -               3.17.10         OK         -

----------------------
| Scan Configuration |
----------------------

'/etc/sane.d/dll.d/hpaio' not found.
 hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.17.10         OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension                                          REQUIRED        -               3.17.10         OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model                  
  --------------------------------  -----------------------
  hp:/usb/hp_LaserJet_1320_series?  HP LaserJet 1320 series
  serial=00CNHW55TGZ5                                      

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Canon-MX880-3.50-1_FRITZ!Box
----------------------------
Type: Unknown
Device URI: socket://fritz.box:9100
PPD: /etc/cups/ppd/Canon-MX880-3.50-1_FRITZ!Box.ppd
PPD Description: Canon MX880 series Ver.3.50
Printer status: Drucker Canon-MX880-3.50-1_FRITZ!Box ist im Leerlauf.  Aktiviert seit So 23 Sep 2018 04:08:10 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

Canon-MX880-3.50-1_USB
----------------------
Type: Unknown
Device URI: cnijusb:/dev/usb/lp0
PPD: /etc/cups/ppd/Canon-MX880-3.50-1_USB.ppd
PPD Description: Canon MX880 series Ver.3.50
Printer status: Drucker Canon-MX880-3.50-1_USB ist im Leerlauf.  Aktiviert seit So 23 Sep 2018 04:00:16 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

Canon-MX880-3.90_FRITZ!Box
--------------------------
Type: Unknown
Device URI: socket://fritz.box:9100
PPD: /etc/cups/ppd/Canon-MX880-3.90_FRITZ!Box.ppd
PPD Description: Canon MX880 series Ver.3.90
Printer status: Drucker Canon-MX880-3.90_FRITZ!Box ist im Leerlauf.  Aktiviert seit Do 08 Nov 2018 14:55:34 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

Canon-MX880-3.90_USB
--------------------
Type: Unknown
Device URI: usb://Canon/MX880%20series?serial=10283A&interface=1
PPD: /etc/cups/ppd/Canon-MX880-3.90_USB.ppd
PPD Description: Canon MX880 series Ver.3.90
Printer status: Drucker Canon-MX880-3.90_USB ist im Leerlauf.  Aktiviert seit So 23 Sep 2018 02:49:32 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

Epson-WF-2630_USB
-----------------
Type: Unknown
Device URI: usb://EPSON/WF-2630%20Series?serial=554D43593237333652&interface=1
PPD: /etc/cups/ppd/Epson-WF-2630_USB.ppd
PPD Description: Epson WF-2530 Series - epson-inkjet-printer-escpr 1.6.33-1lsb3.2 (Seiko Epson Corporation LSB 3.2)
Printer status: Drucker Epson-WF-2630_USB ist im Leerlauf.  Aktiviert seit Do 13 Jun 2019 23:44:31 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

HP-LaserJet-1320_pxlmono
------------------------
Type: Printer
Device URI: hp:/usb/hp_LaserJet_1320_series?serial=00CNHW55TGZ5
PPD: /etc/cups/ppd/HP-LaserJet-1320_pxlmono.ppd
PPD Description: HP LaserJet 1320 Foomatic/pxlmono (recommended)
Printer status: Drucker HP-LaserJet-1320_pxlmono ist im Leerlauf.  Aktiviert seit Sa 26 Okt 2019 13:05:31 CEST
Communication status: Good

MX880-series_FRITZ!Box
----------------------
Type: Unknown
Device URI: socket://fritz.box:9100
PPD: /etc/cups/ppd/MX880-series_FRITZ!Box.ppd
PPD Description: Canon MX880 series - CUPS+Gutenprint v5.2.13
Printer status: Drucker MX880-series_FRITZ!Box ist im Leerlauf.  Aktiviert seit So 23 Sep 2018 04:10:31 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

MX880-series_USB
----------------
Type: Unknown
Device URI: usb://Canon/MX880%20series?serial=10283A&interface=1
PPD: /etc/cups/ppd/MX880-series_USB.ppd
PPD Description: Canon MX880 series - CUPS+Gutenprint v5.2.13
Printer status: Drucker MX880-series_USB ist im Leerlauf.  Aktiviert seit So 23 Sep 2018 02:06:02 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.

--------------
| PERMISSION |
--------------

USB             HP-LaserJet-1320_pxlmono       Required        -        -        OK       Node:'/dev/bus/usb/006/004' Perm:'  root  lp rw- rw- rw- rw- r--'

-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible 
error: 'libjpeg-dev' package is missing/incompatible 
error: 'libcups2-dev' package is missing/incompatible 
error: 'cups-bsd' package is missing/incompatible 
error: 'cups-client' package is missing/incompatible 
error: 'libcupsimage2-dev' package is missing/incompatible 
error: 'libusb-1.0.0-dev' package is missing/incompatible 
error: 'libsane-dev' package is missing/incompatible 
error: 'libsnmp-dev' package is missing/incompatible 
error: 'snmp-mibs-downloader' package is missing/incompatible 
error: 'openssl' package is missing/incompatible 
error: 'python3-pyqt4' package is missing/incompatible 
error: 'gtk2-engines-pixbuf' package is missing/incompatible 
error: 'python3-dev' package is missing/incompatible 
error: 'libtool' package is missing/incompatible 
error: 'libtool-bin' package is missing/incompatible 

Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible 

Total Errors: 12
Total Warnings: 7

Done.
ich@T500:~$ hp-info

HP Linux Imaging and Printing System (ver. 3.17.10)
Device Information Utility ver. 5.2

Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Done.
$ hp-check -r
inters must use the hp: or hpfax: CUPS backend for HP-Devices.

HP-LaserJet-1320_pxlmono
------------------------
Type: Printer
Device URI: hp:/usb/hp_LaserJet_1320_series?serial=00CNHW55TGZ5
PPD: /etc/cups/ppd/HP-LaserJet-1320_pxlmono.ppd
PPD Description: HP LaserJet 1320 Foomatic/pxlmono (recommended)
Printer status: Drucker HP-LaserJet-1320_pxlmono ist im Leerlauf.  Aktiviert seit Sa 26 Okt 2019 13:05:31 CEST
Communication status: Good

$ cat /lib/udev/rules.d/99-saned.rules
# $Id: 99-saned.rules 218 2016-02-19 18:48:21Z wimalopaan $
#
#  scanbd - KMUX scanner button daemon
#
#  Copyright (C) 2008 - 2016  Wilhelm Meier (wilhelm.meier@fh-kl.de)
[.....]
$ id
uid=1000(bill) gid=1000(bill) Gruppen=1000(bill),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),118(lpadmin),126(sambashare)
$ id
uid=1000(bill) gid=1000(bill) Gruppen=1000(bill),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),118(lpadmin),126(sambashare)

Kellerkind_2009 Anmeldungsdatum: 26. November 2009 Beiträge: 19617 Wohnort: Schleswig-Holstein	Zitieren 26. Oktober 2019 12:44 Zeige nun mal abschließend ohne sudo hp-check -r
UlfZibis (Themenstarter) Anmeldungsdatum: 13. Juli 2011 Beiträge: 3304 Wohnort: Köln	Zitieren 26. Oktober 2019 12:49 (zuletzt bearbeitet: 26. Oktober 2019 12:50) Kellerkind_2009 schrieb: Zeige nun mal abschließend ohne sudo $ hp-check -r Saving output in log file: /home/ich/hp-check.log HP Linux Imaging and Printing System (ver. 3.17.10) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install... --------------- \| SYSTEM INFO \| --------------- Kernel: 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC 2019 GNU/Linux Host: T500 Proc: 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC 2019 GNU/Linux Distribution: 12 18.04 Bitness: 64 bit ----------------------- \| HPLIP CONFIGURATION \| ----------------------- HPLIP-Version: HPLIP 3.17.10 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.17.10 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip html=/usr/share/doc/hplip-doc icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.17.10 restricted-build=no ui-toolkit=qt5 qt3=no qt4=no qt5=yes policy-kit=yes lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=no Current contents of '/var/lib/hp/hplip.state' file: Plugins are not installed. Could not access file: No such file or directory Current contents of '~/.hplip/hplip.conf' file: [installation] date_time = 10/26/19 12:45:35 version = 3.17.10 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> ------------------------- \| External Dependencies \| ------------------------- error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK - xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK - scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK - dbus DBus - Message bus system REQUIRED - 1.12.2 OK - policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK - network network -wget OPTIONAL - 1.19.4 OK - avahi-utils avahi-utils OPTIONAL - 0.7 OK - ------------------------ \| General Dependencies \| ------------------------ error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed' error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed' error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed' libpthread libpthread - POSIX threads library REQUIRED - b'2.27' OK - error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed' sane SANE - Scanning library REQUIRED - - OK - error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed' error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed' error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed' python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.8 OK - python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK - error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed' error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed' python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK - python3-xml Python XML libraries REQUIRED - 2.2.5 OK - error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.8 MISSING 'python3-devel needs to be installed' python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK - python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK - -------------- \| COMPILEDEP \| -------------- error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed' gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.4.0 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK - --------------------- \| Python Extentions \| --------------------- cupsext CUPS-Extension REQUIRED - 3.17.10 OK - hpmudext IO-Extension REQUIRED - 3.17.10 OK - ---------------------- \| Scan Configuration \| ---------------------- '/etc/sane.d/dll.d/hpaio' not found. hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK - ------------------------------ \| DISCOVERED SCANNER DEVICES \| ------------------------------ No Scanner found. -------------------------- \| DISCOVERED USB DEVICES \| -------------------------- Device URI Model -------------------------------- ----------------------- hp:/usb/hp_LaserJet_1320_series? HP LaserJet 1320 series serial=00CNHW55TGZ5 --------------------------------- \| INSTALLED CUPS PRINTER QUEUES \| --------------------------------- Canon-MX880-3.50-1_FRITZ!Box ---------------------------- Type: Unknown Device URI: socket://fritz.box:9100 PPD: /etc/cups/ppd/Canon-MX880-3.50-1_FRITZ!Box.ppd PPD Description: Canon MX880 series Ver.3.50 Printer status: Drucker Canon-MX880-3.50-1_FRITZ!Box ist im Leerlauf. Aktiviert seit So 23 Sep 2018 04:08:10 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Canon-MX880-3.50-1_USB ---------------------- Type: Unknown Device URI: cnijusb:/dev/usb/lp0 PPD: /etc/cups/ppd/Canon-MX880-3.50-1_USB.ppd PPD Description: Canon MX880 series Ver.3.50 Printer status: Drucker Canon-MX880-3.50-1_USB ist im Leerlauf. Aktiviert seit So 23 Sep 2018 04:00:16 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Canon-MX880-3.90_FRITZ!Box -------------------------- Type: Unknown Device URI: socket://fritz.box:9100 PPD: /etc/cups/ppd/Canon-MX880-3.90_FRITZ!Box.ppd PPD Description: Canon MX880 series Ver.3.90 Printer status: Drucker Canon-MX880-3.90_FRITZ!Box ist im Leerlauf. Aktiviert seit Do 08 Nov 2018 14:55:34 CET warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Canon-MX880-3.90_USB -------------------- Type: Unknown Device URI: usb://Canon/MX880%20series?serial=10283A&interface=1 PPD: /etc/cups/ppd/Canon-MX880-3.90_USB.ppd PPD Description: Canon MX880 series Ver.3.90 Printer status: Drucker Canon-MX880-3.90_USB ist im Leerlauf. Aktiviert seit So 23 Sep 2018 02:49:32 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Epson-WF-2630_USB ----------------- Type: Unknown Device URI: usb://EPSON/WF-2630%20Series?serial=554D43593237333652&interface=1 PPD: /etc/cups/ppd/Epson-WF-2630_USB.ppd PPD Description: Epson WF-2530 Series - epson-inkjet-printer-escpr 1.6.33-1lsb3.2 (Seiko Epson Corporation LSB 3.2) Printer status: Drucker Epson-WF-2630_USB ist im Leerlauf. Aktiviert seit Do 13 Jun 2019 23:44:31 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. HP-LaserJet-1320_pxlmono ------------------------ Type: Unknown Device URI: usb://HP/LaserJet%201320%20series?serial=00CNHW55TGZ5 PPD: /etc/cups/ppd/HP-LaserJet-1320_pxlmono.ppd PPD Description: HP LaserJet 1320 Foomatic/pxlmono (recommended) Printer status: Drucker HP-LaserJet-1320_pxlmono ist im Leerlauf. Aktiviert seit Sa 26 Okt 2019 11:49:38 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. MX880-series_FRITZ!Box ---------------------- Type: Unknown Device URI: socket://fritz.box:9100 PPD: /etc/cups/ppd/MX880-series_FRITZ!Box.ppd PPD Description: Canon MX880 series - CUPS+Gutenprint v5.2.13 Printer status: Drucker MX880-series_FRITZ!Box ist im Leerlauf. Aktiviert seit So 23 Sep 2018 04:10:31 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. MX880-series_USB ---------------- Type: Unknown Device URI: usb://Canon/MX880%20series?serial=10283A&interface=1 PPD: /etc/cups/ppd/MX880-series_USB.ppd PPD Description: Canon MX880 series - CUPS+Gutenprint v5.2.13 Printer status: Drucker MX880-series_USB ist im Leerlauf. Aktiviert seit So 23 Sep 2018 02:06:02 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. -------------- \| PERMISSION \| -------------- USB None Required - - OK Node:'/dev/bus/usb/006/004' Perm:' root lp rw- rw- rw- rw- r--' ----------- \| SUMMARY \| ----------- Missing Required Dependencies ----------------------------- error: 'libcups2' package is missing/incompatible error: 'libjpeg-dev' package is missing/incompatible error: 'libcups2-dev' package is missing/incompatible error: 'cups-bsd' package is missing/incompatible error: 'cups-client' package is missing/incompatible error: 'libcupsimage2-dev' package is missing/incompatible error: 'libusb-1.0.0-dev' package is missing/incompatible error: 'libsane-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible error: 'snmp-mibs-downloader' package is missing/incompatible error: 'openssl' package is missing/incompatible error: 'python3-pyqt4' package is missing/incompatible error: 'gtk2-engines-pixbuf' package is missing/incompatible error: 'python3-dev' package is missing/incompatible error: 'libtool' package is missing/incompatible error: 'libtool-bin' package is missing/incompatible Missing Optional Dependencies ----------------------------- error: 'python3-dbus.mainloop.qt' package is missing/incompatible Total Errors: 12 Total Warnings: 8 Done. Vielleicht sollte ich jetzt auch mal testhalber die URI von `usb:...` nach `hp:...` ändern, oder gleich den Drucker erntfernen und wieder neu hinzuhügen?
Kellerkind_2009 Anmeldungsdatum: 26. November 2009 Beiträge: 19617 Wohnort: Schleswig-Holstein	Zitieren 26. Oktober 2019 12:54 Wir halten erst mal fest .. USB None Required - - OK Node:'/dev/bus/usb/006/004' Perm:' root lp rw- rw- rw- rw- r--' Hat sich jetzt irgend etwas geändert am Verhalten?
UlfZibis (Themenstarter) Anmeldungsdatum: 13. Juli 2011 Beiträge: 3304 Wohnort: Köln	Zitieren 26. Oktober 2019 13:12 (zuletzt bearbeitet: 26. Oktober 2019 13:16) Kellerkind_2009 schrieb: }}} Hat sich jetzt irgend etwas geändert am Verhalten? Ja, nachdem ich nun die URI `hp:/usb/hp_LaserJet_1320_series?serial=00CNHW55TGZ5` eingetragen habe, geht die Testseite immer noch, `hp-info` startet nun auch mit GUI und auch das sieht besser aus: $ hp-check -r Saving output in log file: /home/ich/hp-check.log HP Linux Imaging and Printing System (ver. 3.17.10) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install... --------------- \| SYSTEM INFO \| --------------- Kernel: 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC 2019 GNU/Linux Host: T500 Proc: 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC 2019 GNU/Linux Distribution: 12 18.04 Bitness: 64 bit ----------------------- \| HPLIP CONFIGURATION \| ----------------------- HPLIP-Version: HPLIP 3.17.10 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.17.10 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip html=/usr/share/doc/hplip-doc icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.17.10 restricted-build=no ui-toolkit=qt5 qt3=no qt4=no qt5=yes policy-kit=yes lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=no Current contents of '/var/lib/hp/hplip.state' file: Plugins are not installed. Could not access file: No such file or directory Current contents of '~/.hplip/hplip.conf' file: [installation] date_time = 10/26/19 13:05:53 version = 3.17.10 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> ------------------------- \| External Dependencies \| ------------------------- error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK - xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK - scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK - dbus DBus - Message bus system REQUIRED - 1.12.2 OK - policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK - network network -wget OPTIONAL - 1.19.4 OK - avahi-utils avahi-utils OPTIONAL - 0.7 OK - ------------------------ \| General Dependencies \| ------------------------ error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed' error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed' error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed' libpthread libpthread - POSIX threads library REQUIRED - b'2.27' OK - error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed' sane SANE - Scanning library REQUIRED - - OK - error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed' error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed' error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed' python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.8 OK - python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK - error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed' error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed' python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK - python3-xml Python XML libraries REQUIRED - 2.2.5 OK - error: python3-devel Python devel - Python development files REQUIRED 2.2 3.6.8 MISSING 'python3-devel needs to be installed' python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK - python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK - -------------- \| COMPILEDEP \| -------------- error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed' gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.4.0 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK - --------------------- \| Python Extentions \| --------------------- cupsext CUPS-Extension REQUIRED - 3.17.10 OK - hpmudext IO-Extension REQUIRED - 3.17.10 OK - ---------------------- \| Scan Configuration \| ---------------------- '/etc/sane.d/dll.d/hpaio' not found. hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK - ------------------------------ \| DISCOVERED SCANNER DEVICES \| ------------------------------ No Scanner found. -------------------------- \| DISCOVERED USB DEVICES \| -------------------------- Device URI Model -------------------------------- ----------------------- hp:/usb/hp_LaserJet_1320_series? HP LaserJet 1320 series serial=00CNHW55TGZ5 --------------------------------- \| INSTALLED CUPS PRINTER QUEUES \| --------------------------------- Canon-MX880-3.50-1_FRITZ!Box ---------------------------- Type: Unknown Device URI: socket://fritz.box:9100 PPD: /etc/cups/ppd/Canon-MX880-3.50-1_FRITZ!Box.ppd PPD Description: Canon MX880 series Ver.3.50 Printer status: Drucker Canon-MX880-3.50-1_FRITZ!Box ist im Leerlauf. Aktiviert seit So 23 Sep 2018 04:08:10 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Canon-MX880-3.50-1_USB ---------------------- Type: Unknown Device URI: cnijusb:/dev/usb/lp0 PPD: /etc/cups/ppd/Canon-MX880-3.50-1_USB.ppd PPD Description: Canon MX880 series Ver.3.50 Printer status: Drucker Canon-MX880-3.50-1_USB ist im Leerlauf. Aktiviert seit So 23 Sep 2018 04:00:16 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Canon-MX880-3.90_FRITZ!Box -------------------------- Type: Unknown Device URI: socket://fritz.box:9100 PPD: /etc/cups/ppd/Canon-MX880-3.90_FRITZ!Box.ppd PPD Description: Canon MX880 series Ver.3.90 Printer status: Drucker Canon-MX880-3.90_FRITZ!Box ist im Leerlauf. Aktiviert seit Do 08 Nov 2018 14:55:34 CET warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Canon-MX880-3.90_USB -------------------- Type: Unknown Device URI: usb://Canon/MX880%20series?serial=10283A&interface=1 PPD: /etc/cups/ppd/Canon-MX880-3.90_USB.ppd PPD Description: Canon MX880 series Ver.3.90 Printer status: Drucker Canon-MX880-3.90_USB ist im Leerlauf. Aktiviert seit So 23 Sep 2018 02:49:32 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Epson-WF-2630_USB ----------------- Type: Unknown Device URI: usb://EPSON/WF-2630%20Series?serial=554D43593237333652&interface=1 PPD: /etc/cups/ppd/Epson-WF-2630_USB.ppd PPD Description: Epson WF-2530 Series - epson-inkjet-printer-escpr 1.6.33-1lsb3.2 (Seiko Epson Corporation LSB 3.2) Printer status: Drucker Epson-WF-2630_USB ist im Leerlauf. Aktiviert seit Do 13 Jun 2019 23:44:31 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. HP-LaserJet-1320_pxlmono ------------------------ Type: Printer Device URI: hp:/usb/hp_LaserJet_1320_series?serial=00CNHW55TGZ5 PPD: /etc/cups/ppd/HP-LaserJet-1320_pxlmono.ppd PPD Description: HP LaserJet 1320 Foomatic/pxlmono (recommended) Printer status: Drucker HP-LaserJet-1320_pxlmono ist im Leerlauf. Aktiviert seit Sa 26 Okt 2019 13:05:31 CEST Communication status: Good MX880-series_FRITZ!Box ---------------------- Type: Unknown Device URI: socket://fritz.box:9100 PPD: /etc/cups/ppd/MX880-series_FRITZ!Box.ppd PPD Description: Canon MX880 series - CUPS+Gutenprint v5.2.13 Printer status: Drucker MX880-series_FRITZ!Box ist im Leerlauf. Aktiviert seit So 23 Sep 2018 04:10:31 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. MX880-series_USB ---------------- Type: Unknown Device URI: usb://Canon/MX880%20series?serial=10283A&interface=1 PPD: /etc/cups/ppd/MX880-series_USB.ppd PPD Description: Canon MX880 series - CUPS+Gutenprint v5.2.13 Printer status: Drucker MX880-series_USB ist im Leerlauf. Aktiviert seit So 23 Sep 2018 02:06:02 CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. -------------- \| PERMISSION \| -------------- USB HP-LaserJet-1320_pxlmono Required - - OK Node:'/dev/bus/usb/006/004' Perm:' root lp rw- rw- rw- rw- r--' ----------- \| SUMMARY \| ----------- Missing Required Dependencies ----------------------------- error: 'libcups2' package is missing/incompatible error: 'libjpeg-dev' package is missing/incompatible error: 'libcups2-dev' package is missing/incompatible error: 'cups-bsd' package is missing/incompatible error: 'cups-client' package is missing/incompatible error: 'libcupsimage2-dev' package is missing/incompatible error: 'libusb-1.0.0-dev' package is missing/incompatible error: 'libsane-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible error: 'snmp-mibs-downloader' package is missing/incompatible error: 'openssl' package is missing/incompatible error: 'python3-pyqt4' package is missing/incompatible error: 'gtk2-engines-pixbuf' package is missing/incompatible error: 'python3-dev' package is missing/incompatible error: 'libtool' package is missing/incompatible error: 'libtool-bin' package is missing/incompatible Missing Optional Dependencies ----------------------------- error: 'python3-dbus.mainloop.qt' package is missing/incompatible Total Errors: 12 Total Warnings: 7 Done. ich@T500:~$ hp-info HP Linux Imaging and Printing System (ver. 3.17.10) Device Information Utility ver. 5.2 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Done. Als nächstes werde ich mal neu starten, und dann auch mal die geparkte `udev`-Regel wieder aktivieren. EDIT: Und dann fragt sich auch noch, ob ich die Gruppenzugehörigkeit zu `lp` wieder rausnehmen kann, bei swkh scheint die ja auch nicht drin zu sein ???
Kellerkind_2009 Anmeldungsdatum: 26. November 2009 Beiträge: 19617 Wohnort: Schleswig-Holstein	Zitieren 26. Oktober 2019 13:16 Aha – siehe mal einer an.... UlfZibis schrieb: `hp-info` startet nun auch mit GUI und auch das sieht besser aus: $ hp-check -r inters must use the hp: or hpfax: CUPS backend for HP-Devices. HP-LaserJet-1320_pxlmono ------------------------ Type: Printer Device URI: hp:/usb/hp_LaserJet_1320_series?serial=00CNHW55TGZ5 PPD: /etc/cups/ppd/HP-LaserJet-1320_pxlmono.ppd PPD Description: HP LaserJet 1320 Foomatic/pxlmono (recommended) Printer status: Drucker HP-LaserJet-1320_pxlmono ist im Leerlauf. Aktiviert seit Sa 26 Okt 2019 13:05:31 CEST Communication status: Good Als nächstes werde ich mal neu starten, und dann auch mal die geparkte `udev`-Regel wieder aktivieren. ☺ Dann mal los.
UlfZibis (Themenstarter) Anmeldungsdatum: 13. Juli 2011 Beiträge: 3304 Wohnort: Köln	Zitieren 26. Oktober 2019 14:02 (zuletzt bearbeitet: 26. Oktober 2019 14:06) Kellerkind_2009 schrieb: Aha – siehe mal einer an.... An dieser Stelle mal ein herzliches Dankeschön an Dein Durchhaltevermögen ... und die flotte quasi Hotline-Kommunikation. Als nächstes werde ich mal neu starten, und dann auch mal die geparkte `udev`-Regel wieder aktivieren. ☺ Dann mal los. Ja, es ist tatsächlich die `udev`-Regel, die alles blockiert. Ich werde den Effekt mal an die sane-devel-Liste berichten, mal seh'n, ob die eine Lösung finden. Auch die Gruppenzugehörigkeit zu `lp` konnte ich wieder rausnehmen, ohne dass was kaputt geht. Ein "Geheimnis" bleibt aber noch, nämlich was das HP-Indikator-Menü uns sagen wollen würde, wenn es denn funktionierte: Bilder Download HP_Indikator_Menu.png
Kellerkind_2009 Anmeldungsdatum: 26. November 2009 Beiträge: 19617 Wohnort: Schleswig-Holstein	Zitieren 26. Oktober 2019 14:05 Wenn ich das wüsste ☺ Das wird wohl ein "Geheimnis" bleiben 😬 Mein Wissen ist ausgeschöpft und ich habe auch kein HP mehr um das zu Testen. Gruß Stephan
UlfZibis (Themenstarter) Anmeldungsdatum: 13. Juli 2011 Beiträge: 3304 Wohnort: Köln	Zitieren 26. Oktober 2019 14:28 UlfZibis schrieb: Ich werde den Effekt mal an die sane-devel-Liste berichten, mal seh'n, ob die eine Lösung finden. Done: https://alioth-lists.debian.net/pipermail/sane-devel/2019-October/037181.html Kellerkind_2009 schrieb: Wenn ich das wüsste ☺ Das wird wohl ein "Geheimnis" bleiben 😬 Vielleicht helfen da ja die fehlen QT-Pakete. Vielleicht kann swkh ja dazu mal posten, genauso wie bei ihm Gruppenmitgliedschaft von `lp` eingestellt ist. Gruß Stephan Auch mal eine gute Idee, also ... Gruß vom schönen Rhein, Ulf
UlfZibis (Themenstarter) Anmeldungsdatum: 13. Juli 2011 Beiträge: 3304 Wohnort: Köln	Zitieren 26. Oktober 2019 14:55 (zuletzt bearbeitet: 26. Oktober 2019 15:14) UlfZibis schrieb: $ cat /lib/udev/rules.d/99-saned.rules # $Id: 99-saned.rules 218 2016-02-19 18:48:21Z wimalopaan $ # # scanbd - KMUX scanner button daemon # # Copyright (C) 2008 - 2016 Wilhelm Meier (wilhelm.meier@fh-kl.de) [.....] Hab' den Übeltäter entlarvt, und gleich mal notiert: scanbd/a/diff/973936/975046
Kellerkind_2009 Anmeldungsdatum: 26. November 2009 Beiträge: 19617 Wohnort: Schleswig-Holstein	Zitieren 26. Oktober 2019 20:21 Dann ist das ganze gelöst ❓ ☺
UlfZibis (Themenstarter) Anmeldungsdatum: 13. Juli 2011 Beiträge: 3304 Wohnort: Köln	Zitieren 26. Oktober 2019 21:48 (zuletzt bearbeitet: 26. Oktober 2019 23:08) Kellerkind_2009 schrieb: Dann ist das ganze gelöst ❓ ☺ Quasi! Der Störenfried ist entlarvt, aber noch nicht entstört. Ich habe eine E-Mail an den Autor der `udev`-Regel geschrieben, mit der Bitte, nach einer Lösung zu suchen. Theoretisch kann der Fehler auch im HPLIP-Paket sein, also dass die `udev`-Regel falsch interpretiert wird. Und dann ist da noch der Fehler mit dem Indikator-Menü. EDIT: Auf dem 16.04 Xubuntu funktioniert das Indikator-Menü. Das kann daran liegen, das dort hplip-gui von python3-dbus.mainloop.qt abhängig ist, letzteres also automatisch mitinstalliert wird. Auf 18.04 ist hplip-gui von python3-dbus.mainloop.pyqt5 abhängig. Somit fehlt python3-dbus.mainloop.qt. Wenn ich es manuell nachinstalliere, sagt `hp-check -r`, dass es inkompatibel ist. Wenn ich dann noch zusätzlich python3-pyqt4 installiere, ist `hp-check -r` wieder zufrieden, aber das Indikator-Menü geht immer noch nicht.
swkh Anmeldungsdatum: 10. April 2015 Beiträge: 610	Zitieren 27. Oktober 2019 09:27 UlfZibis schrieb: Und dann ist da noch der Fehler mit dem Indikator-Menü. Könntest Du mal genauer beschreiben, was Du mit Indikator-Menü meinst und was Du von diesem Menü erwartest? Was soll - kann aber nicht - in diesem Menü ausgewählt werden? Und worüber soll eine Anzeige erfolgen? Zum besseren Verständnis meines Unverständnisses: Auf meinem Rechner (Xubuntu 18.04) gibt es ein Whisker-Menü, in dem ich HPLIP-Toolbox, HP Fax Utility und Fax address book auswählen kann. Die beiden letzten sind überflüssig, da ich von HP nichts zum Faxen habe. Schließlich gibt es eine Benachrichtigung, die z.B. laufende Druckjobs zeigt, sowie ein Icon im System tray, wenn der HP Device Manager aktiv ist. Unter Einstellungen / Benachrichtigungen ist hplip aktiviert.
UlfZibis (Themenstarter) Anmeldungsdatum: 13. Juli 2011 Beiträge: 3304 Wohnort: Köln	Zitieren 27. Oktober 2019 10:17 swkh schrieb: Könntest Du mal genauer beschreiben, was Du mit Indikator-Menü meinst und was Du von diesem Menü erwartest? Mit Indikator wird unter Unity ungefähr das bezeichnet, was woanders Panel-Applet oder Systray-Applet genannt wird. Den Begriff Whisker-Menü kenne ich nicht, bezeichnet aber wohl was ähnliches. Was soll - kann aber nicht - in diesem Menü ausgewählt werden? Wenn ich diesen Indikator anklicke, sehe ich da, wo ein Menü erscheinen sollte, nur einen schwarzen Balken, siehe: https://media-cdn.ubuntu-de.org/forum/attachments/17/42/9107262-HP_Indikator_Menu.png Und worüber soll eine Anzeige erfolgen? Über das, was Du im Systray-Applet bzw. Whisker-Menü siehst. Schließlich gibt es eine Benachrichtigung, die z.B. laufende Druckjobs zeigt, Solche "On-Screen-Blasen" erscheinen bei mir auch. Dann würde mich noch interessieren, ob Dein Normal-User Mitglied in der Gruppe `lp` ist, was mit dem Befehl `id` angezeigt werden kann und welche der im letzten Beitrag von mir aufgeführten Pakete (Python/QT) und in welcher Version installiert sind.
swkh Anmeldungsdatum: 10. April 2015 Beiträge: 610	Zitieren 27. Oktober 2019 12:31 UlfZibis schrieb: Mit Indikator wird unter Unity ungefähr das bezeichnet, was woanders Panel-Applet oder Systray-Applet genannt wird. Den Begriff Whisker-Menü kenne ich nicht, bezeichnet aber wohl was ähnliches. Jetzt bin ich komplett verwirrt: Ubuntu 18.04 verwendet standardmäßig Gnome Shell als Desktop, Unity ist passé. Ich verwende Xfce als Desktop, und dort erscheint im Menü (das Menü, aus dem man Anwendungen auswählt, nennt sich hier Whisker Menu) neben anderen Anwendungen auch einiges von HP - wie im beigefügten Screenshot ersichtlich). Zu Deinem Unity-Problem kann ich leider nichts beitragen. Vermutlich ist bei einem solchen Desktop-spezifischen Problem auch ein anderes Unterforum besser geeignet. Mit der Überschrift "HP Laser Jet 1320 druckt nicht" hat es ja offenbar nichts zu tun. Dann würde mich noch interessieren, ob Dein Normal-User Mitglied in der Gruppe `lp` ist, was mit dem Befehl `id` angezeigt werden kann und welche der im letzten Beitrag von mir aufgeführten Pakete (Python/QT) und in welcher Version installiert sind. Voilà: $ id uid=1000(bill) gid=1000(bill) Gruppen=1000(bill),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),118(lpadmin),126(sambashare) python3-dbus.mainloop.pyqt5 ist in der Version 5.10.1 installiert. python3-dbus.mainloop.qt ist nicht installiert. python3-pyqt4 ist ebenfalls nicht installiert. Bilder Download Whisker_Menu
UlfZibis (Themenstarter) Anmeldungsdatum: 13. Juli 2011 Beiträge: 3304 Wohnort: Köln	Zitieren 27. Oktober 2019 13:38 swkh schrieb: Jetzt bin ich komplett verwirrt: Ubuntu 18.04 verwendet standardmäßig Gnome Shell als Desktop, Unity ist passé. Nicht wirklich, Du kannst es weiterhin nachinstallieren. Solange es in den Repositories ist, gehe ich davon aus, dass es dann auch noch Sicherheitsaktualisierungen gibt, nur eben keine neuen Features mehr. Ich verwende Xfce als Desktop, und dort erscheint im Menü (das Menü, aus dem man Anwendungen auswählt, nennt sich hier Whisker Menu) neben anderen Anwendungen auch einiges von HP - wie im beigefügten Screenshot ersichtlich). Danke, genau das wollte ich wissen. Grundsätzlich funktioniert es also noch unter 18.04, nur scheinbar nicht mehr unter Unity auf 18.04. Na gut, damit kann man leben, Hauptsache, der Drucker druckt und die Terminal-Befehle funktionieren. Auf scanbd muss ich dann bis auf weiteres verzichten, bis dieser Fehler behoben ist. $ id uid=1000(bill) gid=1000(bill) Gruppen=1000(bill),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),118(lpadmin),126(sambashare) OK, die Gruppe `lp` ist also auch bei Dir nicht vonnöten. python3-dbus.mainloop.pyqt5 ist in der Version 5.10.1 installiert. python3-dbus.mainloop.qt ist nicht installiert. python3-pyqt4 ist ebenfalls nicht installiert. Danke, also auch alles wie bei mir.

HP Laser Jet 1320 druckt nicht