Saptah
Anmeldungsdatum: 20. Juli 2019
Beiträge: 59
Wohnort: Saarland
|
Hallo, ich habe gerade ein paar Schwierigkeiten mit dem Brother HL-L2300D unter Ubuntu 18.04.3
Manche PDF-Dateien und auch DOCX-Dokumente werden nicht ausgedruckt, obwohl der Druckauftrag anscheinend ganz normal verarbeitet wird. Bei den DOCX-Dokumenten konnte ich durch abspeichern als ODF-Dokument drucken.
Bei den PDF-Dateien hatte ich mir zunächst überlegt diese neu als PDF zu drucken und anschließend den Ausdruck über den Drucker mit der neuen Datei zu probieren – leider ohne Ergebnis. Als Treiber hatte ich sowohl den in CUPS vorhanden Treiber "Brother HL-L2300D, using brlaser V4" als auch den Treiber von der Brother Homepage getestet, das Ergebnis ist jeweils das Gleiche.
Mit einem anderen Rechner (gleiche Systemkonfig) hatte ich auch keinen Erfolg. Der Druckauftrag wird in CUPS in der Weboberfläche angezeigt und verarbeitet, der Drucker blinkt, beginnt den Druckvorgang jedoch nicht. Nach einiger Zeit verschwindet der Druckauftrag und wird zu den "abgeschlossenen" Druckaufträgen verschoben. Das Problem scheint an den Dateien zu liegen. Anbei eine Beispieldatei, die ich nicht drucken kann. Vielleicht hat jemand den gleichen Drucker und kann probieren die Datei zu drucken.
Auch PDFs, die durch Simple Scan erstellt wurden können nicht gedruckt werden unabhängig von der Dateigröße. Beispiel: https://ec.europa.eu/health/sites/health/files/files/eudralex/vol-1/reg_2012_520/reg_2012_520_de.pdf
- Beispiel (964.8 KiB)
- Download Beispiel
|
Flatlander
Anmeldungsdatum: 24. November 2012
Beiträge: 5
|
Hallo Saptah,
habe ein ähnliches Problem, bei mir ist es allerdings ein Samsung C480W. Ich kann keine pdf-Dateien noch docx- Dateien drucken, es kommen immer nur ein paar Steuerzeichen pro Seite. Seltsamerweise kann ich Dokumente aus dem Netz über Firefox fehlerfrei ausdrucken.
Gruß Flatlander.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Das liegt sehr Häufig an den Standard PDF Programm (Viewer).Mein Tipp https://wiki.ubuntuusers.de/Master_PDF_Editor/ P.s. Die PDF wird damit Korrekt gedruckt.
|
Saptah
(Themenstarter)
Anmeldungsdatum: 20. Juli 2019
Beiträge: 59
Wohnort: Saarland
|
Erstmal vielen Dank für den Hinweis.
Ich habe es mit dem Master PDF- Editor versucht, leider ohne Erfolg ☹ Das Ergebnis ist das gleiche. Seltsamerweise lassen sich die betroffenen Dateien mit einem anderen Drucker (MFC-J5730DW über CUPS (IPP) ) ohne Probleme ausdrucken... Es scheint also an der Kombination Dokument + HL-L2300D zu liegen...
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Da wäre mal dpkg -l | egrep Brother interessant.
|
Saptah
(Themenstarter)
Anmeldungsdatum: 20. Juli 2019
Beiträge: 59
Wohnort: Saarland
|
| martin@Martins-TP:~$ dpkg -l | egrep Brother
ii brscan-skey 0.2.4-1 amd64 Brother Linux scanner S-KEY tool
ii brscan4 0.4.8-1 amd64 Brother Scanner Driver
ii printer-driver-brlaser 4-1 amd64 printer driver for (some) Brother laser printers
ii printer-driver-ptouch 1.4.2-3 amd64 printer driver Brother P-touch label printers
|
Die ersten beiden Einträge würde ich dem MFC J5730DW zuordnen auf dem das Drucken funktioniert.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Falsch 😛 Das ist für den Scanner. Es sind keine Druckertreiber installiert 😉
|
Saptah
(Themenstarter)
Anmeldungsdatum: 20. Juli 2019
Beiträge: 59
Wohnort: Saarland
|
Ja ok da geb ich dir recht, dass für den MFCJ5730 keine Druckertreiber installiert sind, das Teil hat jedoch auch einen Scanner 😉
Auf jeden Fall ist der dritte Eintrag der für den HL-L2300D (Laserdrucker).
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ja,aber es sind nicht die Originalen von Brother 😇
|
Saptah
(Themenstarter)
Anmeldungsdatum: 20. Juli 2019
Beiträge: 59
Wohnort: Saarland
|
| martin@Martins-TP:~$ dpkg -l | egrep Brother
ii brscan-skey 0.2.4-1 amd64 Brother Linux scanner S-KEY tool
ii brscan4 0.4.8-1 amd64 Brother Scanner Driver
ii hll2300dcupswrapper:i386 3.2.0-1 i386 Brother HL-L2300D CUPS wrapper driver
ii hll2300dlpr:i386 3.2.0-1 i386 Brother HL-L2300D LPR driver
ii printer-driver-brlaser 4-1 amd64 printer driver for (some) Brother laser printers
ii printer-driver-ptouch 1.4.2-3 amd64 printer driver Brother P-touch label printers
|
Ich habe die Treiber von Brother zum HL-L2300D nochmal installiert.
Auch mit dem Master pdf Editor lässt sich auch damit nicht drucken.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Hast du den HL-L2300D auch mit dem Treiber nun eingerichtet? tail -n 150 /var/log/cups/error_log
|
Saptah
(Themenstarter)
Anmeldungsdatum: 20. Juli 2019
Beiträge: 59
Wohnort: Saarland
|
Nein eine gesonderte Einrichtung habe ich nicht vorgenommen. 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33 | $ tail -n 150 /var/log/cups/error_log
W [20/Dec/2019:20:26:05 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [20/Dec/2019:20:26:05 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
W [24/Dec/2019:12:47:40 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [24/Dec/2019:12:47:40 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
W [24/Dec/2019:20:40:31 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [24/Dec/2019:20:40:31 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
W [01/Jan/2020:13:55:30 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [01/Jan/2020:13:55:30 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
E [08/Jan/2020:17:58:24 +0100] [cups-deviced] PID 2629 (gutenprint52+usb) stopped with status 1!
W [08/Jan/2020:18:19:34 +0100] [Job 16] [Boomaga] QIODevice::read (QFile, \"/proc/1289/environ\"): device not open
W [08/Jan/2020:18:19:34 +0100] [Job 16] [Boomaga] QIODevice::read (QFile, \"/proc/1381/environ\"): device not open
W [08/Jan/2020:18:19:34 +0100] [Job 16] [Boomaga] QIODevice::read (QFile, \"/proc/1414/environ\"): device not open
W [08/Jan/2020:18:20:30 +0100] [Job 17] [Boomaga] QIODevice::read (QFile, \"/proc/1289/environ\"): device not open
W [08/Jan/2020:18:20:30 +0100] [Job 17] [Boomaga] QIODevice::read (QFile, \"/proc/1381/environ\"): device not open
W [08/Jan/2020:18:20:30 +0100] [Job 17] [Boomaga] QIODevice::read (QFile, \"/proc/1414/environ\"): device not open
W [08/Jan/2020:18:21:01 +0100] [Job 18] [Boomaga] QIODevice::read (QFile, \"/proc/1289/environ\"): device not open
W [08/Jan/2020:18:21:01 +0100] [Job 18] [Boomaga] QIODevice::read (QFile, \"/proc/1381/environ\"): device not open
W [08/Jan/2020:18:21:01 +0100] [Job 18] [Boomaga] QIODevice::read (QFile, \"/proc/1414/environ\"): device not open
E [08/Jan/2020:18:27:44 +0100] [cups-deviced] PID 28795 (gutenprint52+usb) stopped with status 1!
E [08/Jan/2020:18:31:52 +0100] [cups-deviced] PID 28882 (gutenprint52+usb) stopped with status 1!
E [08/Jan/2020:18:47:54 +0100] [cups-deviced] PID 30166 (gutenprint52+usb) stopped with status 1!
E [08/Jan/2020:20:15:46 +0100] [cups-deviced] PID 3375 (gutenprint52+usb) stopped with status 1!
W [09/Jan/2020:20:12:48 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [09/Jan/2020:20:12:48 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
E [09/Jan/2020:20:15:23 +0100] [cups-deviced] PID 4014 (gutenprint52+usb) stopped with status 1!
W [09/Jan/2020:20:24:53 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [09/Jan/2020:20:24:53 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
W [09/Jan/2020:20:42:15 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [09/Jan/2020:20:42:15 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
E [09/Jan/2020:20:44:30 +0100] [cups-deviced] PID 6053 (gutenprint52+usb) stopped with status 1!
W [09/Jan/2020:21:01:48 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [09/Jan/2020:21:01:48 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
|
|
Saptah
(Themenstarter)
Anmeldungsdatum: 20. Juli 2019
Beiträge: 59
Wohnort: Saarland
|
Eine besondere Einrichtung habe ich nicht vorgenommen. 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33 | $ tail -n 150 /var/log/cups/error_log
W [20/Dec/2019:20:26:05 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [20/Dec/2019:20:26:05 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
W [24/Dec/2019:12:47:40 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [24/Dec/2019:12:47:40 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
W [24/Dec/2019:20:40:31 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [24/Dec/2019:20:40:31 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
W [01/Jan/2020:13:55:30 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [01/Jan/2020:13:55:30 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
E [08/Jan/2020:17:58:24 +0100] [cups-deviced] PID 2629 (gutenprint52+usb) stopped with status 1!
W [08/Jan/2020:18:19:34 +0100] [Job 16] [Boomaga] QIODevice::read (QFile, \"/proc/1289/environ\"): device not open
W [08/Jan/2020:18:19:34 +0100] [Job 16] [Boomaga] QIODevice::read (QFile, \"/proc/1381/environ\"): device not open
W [08/Jan/2020:18:19:34 +0100] [Job 16] [Boomaga] QIODevice::read (QFile, \"/proc/1414/environ\"): device not open
W [08/Jan/2020:18:20:30 +0100] [Job 17] [Boomaga] QIODevice::read (QFile, \"/proc/1289/environ\"): device not open
W [08/Jan/2020:18:20:30 +0100] [Job 17] [Boomaga] QIODevice::read (QFile, \"/proc/1381/environ\"): device not open
W [08/Jan/2020:18:20:30 +0100] [Job 17] [Boomaga] QIODevice::read (QFile, \"/proc/1414/environ\"): device not open
W [08/Jan/2020:18:21:01 +0100] [Job 18] [Boomaga] QIODevice::read (QFile, \"/proc/1289/environ\"): device not open
W [08/Jan/2020:18:21:01 +0100] [Job 18] [Boomaga] QIODevice::read (QFile, \"/proc/1381/environ\"): device not open
W [08/Jan/2020:18:21:01 +0100] [Job 18] [Boomaga] QIODevice::read (QFile, \"/proc/1414/environ\"): device not open
E [08/Jan/2020:18:27:44 +0100] [cups-deviced] PID 28795 (gutenprint52+usb) stopped with status 1!
E [08/Jan/2020:18:31:52 +0100] [cups-deviced] PID 28882 (gutenprint52+usb) stopped with status 1!
E [08/Jan/2020:18:47:54 +0100] [cups-deviced] PID 30166 (gutenprint52+usb) stopped with status 1!
E [08/Jan/2020:20:15:46 +0100] [cups-deviced] PID 3375 (gutenprint52+usb) stopped with status 1!
W [09/Jan/2020:20:12:48 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [09/Jan/2020:20:12:48 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
E [09/Jan/2020:20:15:23 +0100] [cups-deviced] PID 4014 (gutenprint52+usb) stopped with status 1!
W [09/Jan/2020:20:24:53 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [09/Jan/2020:20:24:53 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
W [09/Jan/2020:20:42:15 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [09/Jan/2020:20:42:15 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
E [09/Jan/2020:20:44:30 +0100] [cups-deviced] PID 6053 (gutenprint52+usb) stopped with status 1!
W [09/Jan/2020:21:01:48 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-Gray..\' already exists
W [09/Jan/2020:21:01:48 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_MFC_J5730DW-DeviceN..\' already exists
|
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
*hust* wenn du deine Ausgaben mal ansiehst –- was fällt dir auf?? Mir fällt auf das der HL-L2300D überhaupt nicht auftaucht! Es wird nur der MFC_J5730DW registriert – also --was ist da Los ❓ sudo lpstat -p cat /etc/printcap
|
Saptah
(Themenstarter)
Anmeldungsdatum: 20. Juli 2019
Beiträge: 59
Wohnort: Saarland
|
Hm ok, folgende Ausgabe bekomme ich 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 | martin@Martins-TP:~$ sudo lpstat -p
[sudo] Passwort für martin:
Drucker Brother_MFC_J5730DW ist im Leerlauf. Aktiviert seit Fr 10 Jan 2020 18:33:56 CET
Drucker HL-L2300D-series ist im Leerlauf. Aktiviert seit Do 09 Jan 2020 20:46:36 CET
Drucker HLL2300D ist im Leerlauf. Aktiviert seit Do 09 Jan 2020 20:50:38 CET
Drucker MFCJ5730DW ist im Leerlauf. Aktiviert seit Sa 31 Aug 2019 16:28:07 CEST
martin@Martins-TP:~$ cat /etc/printcap
# This file was automatically generated by cupsd(8) from the
# /etc/cups/printers.conf file. All changes to this file
# will be lost.
HL-L2300D-series|Brother HL-L2300D series:rm=Martins-TP:rp=HL-L2300D-series:
Brother_MFC_J5730DW|Brother MFC-J5730DW:rm=Martins-TP:rp=Brother_MFC_J5730DW:
HLL2300D|HLL2300D:rm=Martins-TP:rp=HLL2300D:
MFCJ5730DW|MFCJ5730DW:rm=Martins-TP:rp=MFCJ5730DW:
|
|