ubuntuusers.de

doro@doro-E6222:~$ python3 /usr/share/hplip/check.py
Saving output in log file: /home/doro/hp-check.log

HP Linux Imaging and Printing System (ver. 3.17.7)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Check types:                                                                    
a. EXTERNALDEP - External Dependencies                                          
b. GENERALDEP - General Dependencies (required both at compile and run time)    
c. COMPILEDEP - Compile time Dependencies                                       
d. [All are run-time checks]                                                    
PYEXT SCANCONF QUEUES PERMISSION                                                

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

> \/usr/share/themes/Ambiance/gtk-2.0/apps/mate-panel.rc:30: error: invalid string constant "murrine-scrollbar", expected valid string constant
> warning: 12-17.10 version is not supported. Using 12-17.04 versions dependencies to verify and install...


---------------
| SYSTEM INFO |
---------------

 Kernel: 4.13.0-16-generic #19-Ubuntu SMP Wed Oct 11 18:35:14 UTC 2017 GNU/Linux
 Host: doro-E6222
 Proc: 4.13.0-16-generic #19-Ubuntu SMP Wed Oct 11 18:35:14 UTC 2017 GNU/Linux
 Distribution: 12 17.10
 Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.17.7
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro  17.10 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.17.7

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.17.7
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no


Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.17.7



Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[fax]
email_address = 
voice_phone = 

[last_used]
device_uri = hp:/net/HP_LaserJet_MFP_M129-M134?ip=192.168.2.106
printer_name = 
working_dir = .

[polling]
device_list = 
enable = false
interval = 5

[refresh]
enable = false
rate = 30
type = 1

[settings]
systray_messages = 0
systray_visible = 2

[upgrade]
last_upgraded_time = 1503352430
notify_upgrade = false
pending_upgrade_time = 0

[installation]
date_time = 11/17/17 22:44:33
version = 3.17.7


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

-------------------------
| External Dependencies |
-------------------------

 cups                 CUPS - Common Unix Printing System                           REQUIRED        1.1             2.2.4           OK         'CUPS Scheduler is running'
 gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.21            OK         -
> /usr/share/themes/Ambiance/gtk-2.0/apps/mate-panel.rc:30: error: invalid string constant "murrine-scrollbar", expected valid string constant
> /usr/share/themes/Ambiance/gtk-2.0/apps/mate-panel.rc:30: error: invalid string constant "murrine-scrollbar", expected valid string constant

 xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.999           OK         -
 scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.27          OK         -
 dbus                 DBus - Message bus system                                    REQUIRED        -               1.10.22         OK         -
 policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.105           OK         -
 network              network -wget                                                OPTIONAL        -               1.19.1          OK         -
 avahi-utils          avahi-utils                                                  OPTIONAL        -               0.6.32          OK         -

------------------------
| General Dependencies |
------------------------

 libjpeg              libjpeg - JPEG library                                       REQUIRED        -               -               OK         -
 cups-devel           CUPS devel- Common Unix Printing System development files    REQUIRED        -               2.2.4           OK         -
 cups-image           CUPS image - CUPS image development files                    REQUIRED        -               2.2.4           OK         -
 libpthread           libpthread - POSIX threads library                           REQUIRED        -               b'2.26'         OK         -
 libusb               libusb - USB library                                         REQUIRED        -               1.0             OK         -
 sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
 sane-devel           SANE - Scanning library development files                    REQUIRED        -               -               OK         -
 libnetsnmp-devel     libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           5.7.3           OK         -
>  error: libcrypto     libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.0.2           MISSING 
   'libcrypto needs to be installed'
 python3X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             3.6.3           OK         -
 python3-notify2      Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               OK         -
 error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4                         OPTIONAL        4.0             -               MISSING    'python3-pyqt4-dbus needs to be installed'
>  error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)         REQUIRED        4.0             -               MISSING
    'python3-pyqt4 needs to be installed'
 python3-dbus         Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.4           OK         -
 python3-xml          Python XML libraries                                         REQUIRED        -               2.2.3           OK         -
 error: python3-devel Python devel - Python development files                      REQUIRED        2.2             3.6.3           MISSING    'python3-devel needs to be installed'
 python3-pil          PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               1.1.7           OK         -
 python3-reportlab    Reportlab - PDF library for Python                           OPTIONAL        2.0             3.4.0           OK         -

--------------
| COMPILEDEP |
--------------

 libtool              libtool - Library building support services                  REQUIRED        -               2.4.6           OK         -
 gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               7.2.0           OK         -
 make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.1             OK         -

---------------------
| Python Extentions |
---------------------

 cupsext              CUPS-Extension                                               REQUIRED        -               3.17.7          OK         -
 hpmudext             IO-Extension                                                 REQUIRED        -               3.17.7          OK         -

----------------------
| Scan Configuration |
----------------------

'/etc/sane.d/dll.d/hpaio' not found.
 hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.17.7          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension                                          REQUIRED        -               3.17.7          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP_LaserJet_MFP_M130nw_BC7C6B_
------------------------------
Type: Unknown
Device URI: ipps://NPIBC7C6B.local:631/ipp/print
PPD: /etc/cups/ppd/HP_LaserJet_MFP_M130nw_BC7C6B_.ppd
> warning: Failed to read /etc/cups/ppd/HP_LaserJet_MFP_M130nw_BC7C6B_.ppd ppd file
PPD Description: 
Printer status: Drucker HP_LaserJet_MFP_M130nw_BC7C6B_ ist im Leerlauf.  Aktiviert seit Fr 17 Nov 2017 21:32:59 CET
> warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.



--------------
| PERMISSION |
--------------

 
-----------
| SUMMARY |
-----------

> Missing Required Dependencies
> -----------------------------
> error: 'openssl' package is missing/incompatible 
> error: 'python3-pyqt4' package is missing/incompatible 
> error: 'gtk2-engines-pixbuf' package is missing/incompatible 
> error: 'python3-dev' package is missing/incompatible 
> 
> Missing Optional Dependencies
> -----------------------------
> error: 'python3-dbus.mainloop.qt' package is missing/incompatible
 

Total Errors: 4
Total Warnings: 1


Done.
doro@doro-E6222:~$ 

error: libcrypto     libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.0.2           MISSING    'libcrypto needs to be installed'

doro@doro-E6222:~$ sudo apt show libcrypto++6
Package: libcrypto++6
Version: 5.6.4-8
.....
.....

Missing Required Dependencies
-----------------------------
error: 'openssl' package is missing/incompatible 

Missing Optional Dependencies

doro@doro-E6222:~$ sudo apt show openssl
Package: openssl
Version: 1.0.2g-1ubuntu13.2
......
......

doro@doro-E6222:~$ export SANE_DEBUG_HPAIO=20 && scanimage -L
[sanei_debug] Setting debug level of hpaio to 20.
[hpaio] sane_hpaio_init(): scan/sane/hpaio.c 323
[hpaio] sane_hpaio_get_devices(local=0): scan/sane/hpaio.c 342
[hpaio] unsupported scantype=0 hp:/net/laserjet_mfp_m129-m134?ip=192.168.2.106&queue=false

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[hpaio] sane_hpaio_exit(): scan/sane/hpaio.c 336

doro@doro-E6222:~$ export SANE_DEBUG_HPAIO=20 && scanimage -L
[sanei_debug] Setting debug level of hpaio to 20.
[hpaio] sane_hpaio_init(): scan/sane/hpaio.c 323
[hpaio] sane_hpaio_get_devices(local=0): scan/sane/hpaio.c 342
[hpaio] unsupported scantype=0 hp:/net/laserjet_mfp_m129-m134?ip=192.168.2.106&queue=false
device `hpaio:/usb/HP_LaserJet_MFP_M129-M134?serial=VNFVC07485' is a Hewlett-Packard HP_LaserJet_MFP_M129-M134 all-in-one
[hpaio] sane_hpaio_exit(): scan/sane/hpaio.c 336
doro@doro-E6222:~$