francesco1950
Anmeldungsdatum: 9. August 2013
Beiträge: Zähle...
|
Danke Tuemmler,
aber ich komme nicht weiter.
Habe irgendwo noch einen Hinweis zu python gefunden und folgendes erhalten:
wilma@B:~$ sudo apt-get install python-all
[sudo] password for wilma:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
kde-l10n-de language-pack-kde-de language-pack-kde-en
language-pack-kde-en-base kde-l10n-engb language-pack-kde-de-base
stellarium-data
Verwenden Sie »apt-get autoremove«, um sie zu entfernen.
Die folgenden NEUEN Pakete werden installiert:
python-all
0 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 912 B an Archiven heruntergeladen werden.
Nach dieser Operation werden 21,5 kB Plattenplatz zusätzlich benutzt.
Hole:1 http://de.archive.ubuntu.com/ubuntu/ precise-updates/main python-all i386 2.7.3-0ubuntu2.2 [912 B]
Es wurden 912 B in 0 s geholt (4.961 B/s)
Vormals nicht ausgewähltes Paket python-all wird gewählt.
(Lese Datenbank ... 324836 Dateien und Verzeichnisse sind derzeit installiert.)
Entpacken von python-all (aus .../python-all_2.7.3-0ubuntu2.2_i386.deb) ...
python-all (2.7.3-0ubuntu2.2) wird eingerichtet ...
wilma@B:~$ cd Downloads
wilma@B:~/Downloads$ sh hplip-3.13.8.run
Creating directory hplip-3.13.8
Verifying archive integrity... All good.
Uncompressing HPLIP 3.13.8 Self Extracting Archive......................................................................................................... HP Linux Imaging and Printing System (ver. 3.13.8)
HPLIP Installer ver. 5.1 Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details. Installer log saved in: hplip-install_Tue-13-Aug-2013_15:17:59.log \
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default. INSTALLATION MODE
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements. Please choose the installation mode (a=automatic*, c=custom, q=quit) : a Initializing. Please wait... INTRODUCTION
This installer will install HPLIP version 3.13.8 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc). DISTRO/OS CONFIRMATION
Distro appears to be Ubuntu 12.04. Is "Ubuntu 12.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y ENTER USER PASSWORD
Please enter the sudoer (wilma)'s password: INSTALLATION NOTES
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information. Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive. During the install process you will be added to the lp and lpadmin group, please quit the installer before the setup stage, log out, log back in, and run hp-setup to complete the install. Please read the installation notes. Press <enter> to continue or 'q' to quit: RUNNING PRE-INSTALL COMMANDS
OK PRE-BUILD COMMANDS
OK BUILD AND INSTALL
Running './configure --with-hpppddir=/usr/share/ppd/HP --prefix=/usr --enable-udev-acl-rules --enable-qt4 --disable-libusb01_build --enable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-foomatic-ppd-install --disable-hpijs-install --disable-udev_sysfs_rules --disable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build'
Please wait, this may take several minutes...
error: Configure failed with error: python-devel not found Ich gebe auf!
Gruß
|
Tuemmler
Anmeldungsdatum: 26. März 2007
Beiträge: 8020
Wohnort: Süsel / Ostholstein
|
Moin Moin. francesco1950 schrieb:
Ich gebe auf!
Das machst Du nicht! Alt + F2 drücken Eingabe
software-properties-gtk Passwort bei der Aufforderung nachliefern. Nun öffnen sich die Einstellungen für Deine Paketquellen.
Für Software von Ubuntu außer Quelltext alles aktivieren und ⇒ Haupt-Server wählen. Für Andere Software cdrom deaktivieren, ggf. auch PPAs deaktivieren Für Aktualisierungen wichtige Sicherheitsaktualisierungen und empfohlene Aktualisierungen aktivieren, die unteren beiden Kästchen bleiben leer Paketquellen schließen
Teminal auf, Eingabe
sudo apt-get autoremove
sudo apt-get clean
sudo apt-get update
sudo apt-get dist-upgrade Fehlermeldungen im Codeblock posten. Treten keine Fehler auf, HPLIP erneut wie gehabt aufrufen. Und bitte, nutze für Terminalausgaben Codeblöcke. Gruß
|
francesco1950
Anmeldungsdatum: 9. August 2013
Beiträge: 8
|
Hallo nochmal, habe die Anweisungen hoffentlich richtig nachvollzogen.
wilma@B:~$ sudo apt-get autoremove
[sudo] password for wilma:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
Die folgenden Pakete werden ENTFERNT:
kde-l10n-de kde-l10n-engb language-pack-kde-de language-pack-kde-de-base
language-pack-kde-en language-pack-kde-en-base stellarium-data
0 aktualisiert, 0 neu installiert, 7 zu entfernen und 0 nicht aktualisiert.
Nach dieser Operation werden 106 MB Plattenplatz freigegeben.
Möchten Sie fortfahren [J/n]? j
(Lese Datenbank ... 324574 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von kde-l10n-de ...
Entfernen von kde-l10n-engb ...
Entfernen von stellarium-data ...
Entfernen von language-pack-kde-en-base ...
Entfernen von language-pack-kde-de-base ...
Entfernen von language-pack-kde-en ...
Entfernen von language-pack-kde-de ...
Trigger für man-db werden verarbeitet ...
Trigger für software-center werden verarbeitet ...
INFO:softwarecenter.db.update:translation information in database is up-to-date
Trigger für bamfdaemon werden verarbeitet ...
Rebuilding /usr/share/applications/bamf.index...
wilma@B:~$ sudo apt-get clean
wilma@B:~$ sudo apt-get update
Hole:1 http://extras.ubuntu.com precise Release.gpg [72 B]
OK http://de.archive.ubuntu.com precise Release.gpg
Hole:2 http://de.archive.ubuntu.com precise-updates Release.gpg [198 B]
OK http://extras.ubuntu.com precise Release
OK http://de.archive.ubuntu.com precise Release
Hole:3 http://de.archive.ubuntu.com precise-updates Release [49,6 kB]
OK http://security.ubuntu.com precise-security Release.gpg
OK http://extras.ubuntu.com precise/main Sources
OK http://extras.ubuntu.com precise/main i386 Packages
Ign http://extras.ubuntu.com precise/main TranslationIndex
OK http://security.ubuntu.com precise-security Release
OK http://de.archive.ubuntu.com precise/main Sources
OK http://de.archive.ubuntu.com precise/restricted Sources
OK http://de.archive.ubuntu.com precise/universe Sources
OK http://de.archive.ubuntu.com precise/multiverse Sources
OK http://de.archive.ubuntu.com precise/main i386 Packages
OK http://de.archive.ubuntu.com precise/restricted i386 Packages
OK http://de.archive.ubuntu.com precise/universe i386 Packages
OK http://de.archive.ubuntu.com precise/multiverse i386 Packages
OK http://de.archive.ubuntu.com precise/main TranslationIndex
OK http://de.archive.ubuntu.com precise/multiverse TranslationIndex
OK http://de.archive.ubuntu.com precise/restricted TranslationIndex
OK http://de.archive.ubuntu.com precise/universe TranslationIndex
Hole:4 http://de.archive.ubuntu.com precise-updates/main Sources [412 kB]
OK http://security.ubuntu.com precise-security/main Sources
OK http://security.ubuntu.com precise-security/restricted Sources
OK http://security.ubuntu.com precise-security/universe Sources
OK http://security.ubuntu.com precise-security/multiverse Sources
OK http://security.ubuntu.com precise-security/main i386 Packages
OK http://security.ubuntu.com precise-security/restricted i386 Packages
OK http://security.ubuntu.com precise-security/universe i386 Packages
OK http://security.ubuntu.com precise-security/multiverse i386 Packages
OK http://security.ubuntu.com precise-security/main TranslationIndex
OK http://security.ubuntu.com precise-security/multiverse TranslationIndex
OK http://security.ubuntu.com precise-security/restricted TranslationIndex
OK http://security.ubuntu.com precise-security/universe TranslationIndex
Ign http://extras.ubuntu.com precise/main Translation-de_DE
Ign http://extras.ubuntu.com precise/main Translation-de
Hole:5 http://de.archive.ubuntu.com precise-updates/restricted Sources [5.467 B]
Hole:6 http://de.archive.ubuntu.com precise-updates/universe Sources [93,9 kB]
OK http://security.ubuntu.com precise-security/main Translation-en
OK http://security.ubuntu.com precise-security/multiverse Translation-en
Ign http://extras.ubuntu.com precise/main Translation-en
Hole:7 http://de.archive.ubuntu.com precise-updates/multiverse Sources [6.582 B]
Hole:8 http://de.archive.ubuntu.com precise-updates/main i386 Packages [692 kB]
OK http://security.ubuntu.com precise-security/restricted Translation-en
OK http://security.ubuntu.com precise-security/universe Translation-en
Hole:9 http://de.archive.ubuntu.com precise-updates/restricted i386 Packages [10,0 kB]
Hole:10 http://de.archive.ubuntu.com precise-updates/universe i386 Packages [215 kB]
Hole:11 http://de.archive.ubuntu.com precise-updates/multiverse i386 Packages [13,8 kB]
Hole:12 http://de.archive.ubuntu.com precise-updates/main TranslationIndex [3.564 B]
Hole:13 http://de.archive.ubuntu.com precise-updates/multiverse TranslationIndex [2.605 B]
Hole:14 http://de.archive.ubuntu.com precise-updates/restricted TranslationIndex [2.461 B]
Hole:15 http://de.archive.ubuntu.com precise-updates/universe TranslationIndex [2.850 B]
OK http://de.archive.ubuntu.com precise/main Translation-de
OK http://de.archive.ubuntu.com precise/main Translation-en
OK http://de.archive.ubuntu.com precise/multiverse Translation-de
OK http://de.archive.ubuntu.com precise/multiverse Translation-en
OK http://de.archive.ubuntu.com precise/restricted Translation-de
OK http://de.archive.ubuntu.com precise/restricted Translation-en
OK http://de.archive.ubuntu.com precise/universe Translation-de
OK http://de.archive.ubuntu.com precise/universe Translation-en
OK http://de.archive.ubuntu.com precise-updates/main Translation-de
OK http://de.archive.ubuntu.com precise-updates/main Translation-en
OK http://de.archive.ubuntu.com precise-updates/multiverse Translation-de
OK http://de.archive.ubuntu.com precise-updates/multiverse Translation-en
OK http://de.archive.ubuntu.com precise-updates/restricted Translation-de
OK http://de.archive.ubuntu.com precise-updates/restricted Translation-en
OK http://de.archive.ubuntu.com precise-updates/universe Translation-de
OK http://de.archive.ubuntu.com precise-updates/universe Translation-en
Es wurden 1.510 kB in 3 s geholt (494 kB/s)
Paketlisten werden gelesen... Fertig
wilma@B:~$ sudo apt-get dist-upgrade
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
Paketaktualisierung (Upgrade) wird berechnet... Fertig
Die folgenden Pakete werden aktualisiert (Upgrade):
lsb-base lsb-release
2 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 21,4 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 1.024 B Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren [J/n]? j
Hole:1 http://de.archive.ubuntu.com/ubuntu/ precise-updates/main lsb-base all 4.0-0ubuntu20.3 [10,5 kB]
Hole:2 http://de.archive.ubuntu.com/ubuntu/ precise-updates/main lsb-release all 4.0-0ubuntu20.3 [11,0 kB]
Es wurden 21,4 kB in 0 s geholt (130 kB/s)
(Lese Datenbank ... 319058 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Ersetzen von lsb-base 4.0-0ubuntu20.2 (durch .../lsb-base_4.0-0ubuntu20.3_all.deb) ...
Ersatz für lsb-base wird entpackt ...
lsb-base (4.0-0ubuntu20.3) wird eingerichtet ...
(Lese Datenbank ... 319058 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Ersetzen von lsb-release 4.0-0ubuntu20.2 (durch .../lsb-release_4.0-0ubuntu20.3_all.deb) ...
Ersatz für lsb-release wird entpackt ...
Trigger für man-db werden verarbeitet ...
lsb-release (4.0-0ubuntu20.3) wird eingerichtet ...
wilma@B:~$ cd Downloads
wilma@B:~/Downloads$ sh hplip-3.13.8.run
Creating directory hplip-3.13.8
Verifying archive integrity... All good.
Uncompressing HPLIP 3.13.8 Self Extracting Archive.................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
HP Linux Imaging and Printing System (ver. 3.13.8)
HPLIP Installer ver. 5.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installer log saved in: hplip-install_Tue-13-Aug-2013_20:58:12.log
\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.
Please choose the installation mode (a=automatic*, c=custom, q=quit) : *
error: Please enter 'a', 'c', 'q' or press <enter> for the default of 'a'.
Please choose the installation mode (a=automatic*, c=custom, q=quit) : a
Initializing. Please wait...
INTRODUCTION
------------
This installer will install HPLIP version 3.13.8 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).
DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 12.04.
Is "Ubuntu 12.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y
ENTER USER PASSWORD
-------------------
Please enter the sudoer (wilma)'s password:
INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information. Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive. During the install process you will be added to the lp and lpadmin group, please quit the installer before the setup stage, log out, log back in, and run hp-setup to complete the install.
Please read the installation notes. Press <enter> to continue or 'q' to quit:
RUNNING PRE-INSTALL COMMANDS
----------------------------
OK
INSTALL MISSING OPTIONAL DEPENDENCIES
-------------------------------------
warning: There are 1 missing OPTIONAL dependencies.
note: Installation of dependencies requires an active internet connection.
warning: Missing OPTIONAL dependency for option 'scan': xsane (xsane - Graphical scanner frontend for SANE)
CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.
RUNNING PRE-PACKAGE COMMANDS
----------------------------
sudo dpkg --configure -a (Pre-depend step 1)
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
sudo apt-get update (Pre-depend step 3)
OK
DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
Running 'sudo apt-get install --assume-yes gtk2-engines-pixbuf'
Please wait, this may take several minutes...
Running 'sudo apt-get install --assume-yes xsane'
Please wait, this may take several minutes...
RUNNING POST-PACKAGE COMMANDS
-----------------------------
OK
RE-CHECKING DEPENDENCIES
------------------------
PRE-BUILD COMMANDS
------------------
OK
BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --prefix=/usr --enable-udev-acl-rules --enable-qt4 --disable-libusb01_build --enable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-foomatic-ppd-install --disable-hpijs-install --disable-udev_sysfs_rules --disable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build'
Please wait, this may take several minutes...
error: Configure failed with error: python-devel not found
wilma@B:~/Downloads$
Leider endet die Installation wieder mit der gleichen Fehlermeldung.
Habe ich was falsch gemacht?
Gruß
Francesco
|
Tuemmler
Anmeldungsdatum: 26. März 2007
Beiträge: 8020
Wohnort: Süsel / Ostholstein
|
OK, Terminal auf, Eingabe sudo apt-get install python-dev und zur Vorsicht bitte einmal
lsb_release -a Ausgaben bitte im Codeblock Gruß Update: Und auch noch zur Vorsicht gibst Du bitte im Terminal ein
sudo apt-get install build-essential Dann HPLIP wie schon gewohnt
|
francesco1950
Anmeldungsdatum: 9. August 2013
Beiträge: 8
|
Hallo again,
hier das Ergebnis der letzten Anweisungen:
wilma@B:~$ sudo apt-get install pyton-dev
[sudo] password for wilma:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
E: Paket pyton-dev kann nicht gefunden werden
wilma@B:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 12.04.2 LTS
Release: 12.04
Codename: precise
wilma@B:~$ sudo apt-get install build-essential
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
build-essential ist schon die neueste Version.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
wilma@B:~$ cd Downloads
wilma@B:~/Downloads$ sh hplip-3.13.8.run
Creating directory hplip-3.13.8
Verifying archive integrity... All good.
Uncompressing HPLIP 3.13.8 Self Extracting Archive.........................................................................................................
HP Linux Imaging and Printing System (ver. 3.13.8)
HPLIP Installer ver. 5.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installer log saved in: hplip-install_Wed-14-Aug-2013_19:44:44.log
\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.
Please choose the installation mode (a=automatic*, c=custom, q=quit) : a
Initializing. Please wait...
INTRODUCTION
------------
This installer will install HPLIP version 3.13.8 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).
DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 12.04.
Is "Ubuntu 12.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y
ENTER USER PASSWORD
-------------------
Please enter the sudoer (wilma)'s password:
INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information. Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive. During the install process you will be added to the lp and lpadmin group, please quit the installer before the setup stage, log out, log back in, and run hp-setup to complete the install.
Please read the installation notes. Press <enter> to continue or 'q' to quit:
RUNNING PRE-INSTALL COMMANDS
----------------------------
OK
PRE-BUILD COMMANDS
------------------
OK
BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --prefix=/usr --enable-udev-acl-rules --enable-qt4 --disable-libusb01_build --enable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-foomatic-ppd-install --disable-hpijs-install --disable-udev_sysfs_rules --disable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build'
Please wait, this may take several minutes...
error: Configure failed with error: python-devel not found
wilma@B:~/Downloads$ Mir ist nur aufgefallen, dass ich über den Dash-Startseite Button HPLIP-Toolbox anwählen kann. Der Button erscheint dann aber nicht mehr in der linken Leiste und auch kein Bildschirmfenster.
Gibt das irgendwelche zusätzlichen Hinweise? Gruß
Francesco
|
Tuemmler
Anmeldungsdatum: 26. März 2007
Beiträge: 8020
Wohnort: Süsel / Ostholstein
|
OK, versuchen wir einen anderen Weg, um python zu installieren.
E: Paket pyton-dev kann nicht gefunden werden
kann nicht richtig sein, es ist Bestandteil von Ubuntu 12.04 zeige bitte Die Ausgabe von
cat /etc/ept/sources.list Hast Du mit
sudo apt-get install synaptic Synaptic installiert? Wenn ja, öffne die Paketverwaltung (in der Dash einfach syn eingeben) öffnet nach Klick ⇒ Synaptic, dort ⇒ in der Suchfunktion → pyton-dev eingeben, was wird angezeigt? Ansonsten wählen wir einen anderen Weg, Terminal auf, Eingabe
sudo apt-get install python3-all-dev Fehlermeldungen bitte im Codeblock posten Gruß
- Bilder
|
francesco1950
Anmeldungsdatum: 9. August 2013
Beiträge: 8
|
Hallo Tümmler,
es sieh so aus, als ob es diemal geklappt hat.
python-dev war nicht geladen. Merkwürdigerweise wurde mir nach Eingabe von python-dev im Suchfenster auch eine ander Funktion mit -dev gezeigt und ich mußt erst an die richtige Stelle zurück scrollen. Vielleicht war das auch der Grund dafür, dass nicht korrekt über die alternative Methode installiert wurde.
wilma@B:~$ cat /etc/ept/sources.list
cat: /etc/ept/sources.list: Datei oder Verzeichnis nicht gefunden
wilma@B:~$ cd ..
wilma@B:/home$ cat /etc/ept/sources.list
cat: /etc/ept/sources.list: Datei oder Verzeichnis nicht gefunden
wilma@B:/home$ ls
lost+found wilma
wilma@B:/home$ cd ..
wilma@B:/$ ls
bin etc lib opt sbin tmp vmlinuz.old
boot home lost+found proc selinux usr
cdrom initrd.img media root srv var
dev initrd.img.old mnt run sys vmlinuz
wilma@B:/$ cat /etc/ept/sources.list
cat: /etc/ept/sources.list: Datei oder Verzeichnis nicht gefunden
wilma@B:/$ sudo apt-get install synaptic
[sudo] password for wilma:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Statusinformationen werden eingelesen... Fertig
synaptic ist schon die neueste Version.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
wilma@B:/$ cd Downloads
bash: cd: Downloads: Datei oder Verzeichnis nicht gefunden
wilma@B:/$ cd home
wilma@B:/home$ ls
lost+found wilma
wilma@B:/home$ cd wilma
wilma@B:~$ cd Downloads
wilma@B:~/Downloads$ sh hplip-3.13.8.run
Creating directory hplip-3.13.8
Verifying archive integrity... All good.
Uncompressing HPLIP 3.13.8 Self Extracting Archive..........................................................................................................................................................................................................................................................
HP Linux Imaging and Printing System (ver. 3.13.8)
HPLIP Installer ver. 5.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installer log saved in: hplip-install_Wed-14-Aug-2013_22:36:13.log
\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.
Please choose the installation mode (a=automatic*, c=custom, q=quit) : a
Initializing. Please wait...
INTRODUCTION
------------
This installer will install HPLIP version 3.13.8 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).
DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 12.04.
Is "Ubuntu 12.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y
ENTER USER PASSWORD
-------------------
Please enter the sudoer (wilma)'s password:
INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information. Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive. During the install process you will be added to the lp and lpadmin group, please quit the installer before the setup stage, log out, log back in, and run hp-setup to complete the install.
Please read the installation notes. Press <enter> to continue or 'q' to quit:
RUNNING PRE-INSTALL COMMANDS
----------------------------
OK
PRE-BUILD COMMANDS
------------------
OK
BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --prefix=/usr --enable-udev-acl-rules --enable-qt4 --disable-libusb01_build --enable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-foomatic-ppd-install --disable-hpijs-install --disable-udev_sysfs_rules --disable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make'
Please wait, this may take several minutes...
Command completed successfully.
Running 'sudo make install'
Please wait, this may take several minutes...
Command completed successfully.
Build complete.
POST-BUILD COMMANDS
-------------------
sudo /usr/sbin/usermod -a -Glp,lpadmin wilma (Post-build step 1)
HPLIP UPDATE NOTIFICATION
-------------------------
Do you want to check for HPLIP updates?. (y=yes*, n=no) : y
HPLIP UPDATE NOTIFICATION
-------------------------
RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in
when you started this installer, you will need to either restart your PC or
unplug and re-plug in your printer (USB cable only). If you choose to restart,
run this command after restarting: hp-setup (Note: If you are using a parallel
connection, you will have to restart your PC. If you are using network/wireless,
you can ignore and continue).
Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) : p
Please unplug and re-plugin your printer now. Press <enter> to continue or 'q' to quit:
PRINTER SETUP
-------------
Please make sure your printer is connected and powered on at this time.
RE-STARTING HP_SYSTRAY
----------------------
HP Linux Imaging and Printing System (ver. 3.13.8)
System Tray Status Service ver. 2.0
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
/usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK
set_interactive(1)
wilma@B:~/Downloads$
Nochmal besten Dank für die Hilfe.
francesco
|
Tuemmler
Anmeldungsdatum: 26. März 2007
Beiträge: 8020
Wohnort: Süsel / Ostholstein
|
Sorry mein Fehler cat /etc/apt/sources.list bitte noch einmal. francesco1950 schrieb: Hallo Tümmler,
es sieh so aus, als ob es diemal geklappt hat.
python-dev war nicht geladen. Merkwürdigerweise wurde mir nach Eingabe von python-dev im Suchfenster auch eine ander Funktion mit -dev gezeigt und ich mußt erst an die richtige Stelle zurück scrollen. Vielleicht war das auch der Grund dafür, dass nicht korrekt über die alternative Methode installiert wurde.
Was immer Du auch mir sagen willst, läuft der Drucker? Hast Du im Anschluss sudo hp-setup eingegeben? Gruß
|
francesco1950
Anmeldungsdatum: 9. August 2013
Beiträge: 8
|
Hallo Tümmler, der Drucker funktioniert nach wie vor, allerdings stelle ich nach dem heutigen Neustart fest, das xsane nicht mehr mit allen Bildschirmfenstern erschein. Es wird nur noch das Bildschirmfenster xsane 0.998 Officejet_6600 gezeigt. Die anderen Fenster blinken nur noch kurz auf und verschwinden wieder.
Gestern hatte ich mir nur so ein kleines Objekt markiert und für den Test-scan eingestellt. Jetzt bekomme die Einstellung nicht wieder vergrößert auf die volle DIN A4 größe, weil diese Anpassung in einem der anderen Fenster gemacht wurde.
Auf der Arbeitsflächer erscheinen mir noch drei xsane-icons wie Dokumente, wo ich nicht weiss, was damit anzufangen ist.
/home/wilma/Arbeitsfläche/xsane-preview-level-0-hpaio:_usb_Officejet__6600_serial=CN25I2B08R05RN.ppm-1000-mgU31K, /home/wilma/Arbeitsfläche/xsane-preview-level-1-hpaio:_usb_Officejet__6600_serial=CN25I2B08R05RN.ppm-1000-Pqr5Ud und /home/wilma/Arbeitsfläche/xsane-preview-level-2-hpaio:_usb_Officejet__6600_serial=CN25I2B08R05RN.ppm-1000-UIC7NG
Haben die vieleicht etwas damit zu tun?
Gruß
Francesco
|
Tuemmler
Anmeldungsdatum: 26. März 2007
Beiträge: 8020
Wohnort: Süsel / Ostholstein
|
Moin Moin, öffne xsane, gehe auf den Menüpunkt ⇒ Fenster, aktiviere das was Du suchst oder brauchst. Gruß
|
francesco1950
Anmeldungsdatum: 9. August 2013
Beiträge: 8
|
Au, das tut weh!
Komme offensichtlich mit den vielen Fenstern immer noch nicht zurecht und habe die oberste Zeile aus meinem Blickfeld verloren.
Nochmal Danke für die Hand.
Francesco
|
Tuemmler
Anmeldungsdatum: 26. März 2007
Beiträge: 8020
Wohnort: Süsel / Ostholstein
|
|
chessmz
Anmeldungsdatum: 18. Juni 2017
Beiträge: Zähle...
|
Hallo zusammen! Das hier soll keine Antwort sein, wohl eher eine Frage. Ich bin seit ein paar Tagen Kubuntu-User (und seit ein paar Minuten registrierter Ubuntuuser), d.h. ich war bis vor Kurzem sonst mit Windows beschäftigt. Nun lese ich mich überall ein und kann aber trotzdem mein Problem nicht wirklich finden. Es geht um die Scanqualität. Ich habe einen HP Officejet 6600 e-all in one, welcher bereits vom PC gefunden wurde und auch schon gescannt hat (läuft bei mir alles über wlan). Nur leider kann ich das Produkt nicht entziffern, geschweige denn lesen. Ich weiß nicht, was ich tun soll. Kennt sich jemand damit aus und wäre so freundlich und könnte mir dabei auf die Sprünge helfen, please??!!??
Ich sitze schon seit Stunden dran... LG
Chessmz
|