Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Gut,dann werden wir im Manuellen Modus mal Installieren cd /home/dbas/Downloads/hp/hplip dann sh hplip-3.18.10.run bei der Frage Please choose the installation mode (a=automatic*, c=custom, q=quit) : wähle c Bei der Frage Would you like to install Custom Discrete Drivers or Class Drivers ( 'd'= Discrete Drivers*,'c'= Class Drivers,'q'= Quit)? wähle d Bei den Optionen SELECT HPLIP OPTIONS
--------------------
You can select which HPLIP options to enable. Some options require extra dependencies.
Do you wish to enable 'Network/JetDirect I/O' (y=yes*, n=no, q=quit) ? n
Do you wish to enable 'Graphical User Interfaces (Qt4)' (y=yes*, n=no, q=quit) ? y
Do you wish to enable 'Graphical User Interfaces (Qt5)' (y=yes, n=no*, q=quit) ? n
Do you wish to enable 'PC Send Fax support' (y=yes*, n=no, q=quit) ? n ## must du wissen
Do you wish to enable 'Scanning support' (y=yes*, n=no, q=quit) ? y
Do you wish to enable 'HPLIP documentation (HTML)' (y=yes*, n=no, q=quit) ? n erst mal bis hier.
|
dbas
(Themenstarter)
Anmeldungsdatum: 2. März 2008
Beiträge: Zähle...
|
ok soweit, bin jetzt bei
Would you like to have this installer install the hplip specific policy/profile (y=yes*, n=no, q=quit) ?
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ok,das mit y Bei der Frage nach Do you want to install these missing dependencies (y=yes*, n=no, q=quit) ? wähle y Bei der Frage Would you like to have this installer install the missing dependency (y=yes*, n=no, q=quit) ? auch y Bis hier erst mal.
|
dbas
(Themenstarter)
Anmeldungsdatum: 2. März 2008
Beiträge: Zähle...
|
bin durch die Installation und habe neugestartet. Leider immer noch dasselbe:
dbas@dbas:~$ hp-check -r
Saving output in log file: /home/dbas/hp-check.log
HP Linux Imaging and Printing System (ver. 3.18.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 12-18.10 version is not supported. Using 12-18.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.18.0-11-generic #12-Ubuntu SMP Tue Oct 23 19:22:37 UTC 2018 GNU/Linux
Host: dbas
Proc: 4.18.0-11-generic #12-Ubuntu SMP Tue Oct 23 19:22:37 UTC 2018 GNU/Linux
Distribution: 12 18.10
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.18.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.10 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.18.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.18.10
html=/usr/share/doc/hplip-3.18.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=no
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=no
dbus-build=yes
cups11-build=no
doc-build=no
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.18.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
qt5=no
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: Datei oder Verzeichnis nicht gefunden
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 16.11.2018 16:51:50
version = 3.18.10
[upgrade]
notify_upgrade = true
last_upgraded_time = 1542382939
pending_upgrade_time = 0
latest_available_version = 3.17.10
[settings]
systray_visible = 0
systray_messages = 0
[last_used]
device_uri = "hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.178.38"
printer_name =
working_dir = .
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------
| COMPILEDEP |
--------------
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 8.2.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
------------------------
| General Dependencies |
------------------------
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python-xml Python XML libraries REQUIRED - 2.2.6 OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 REQUIRED 4.0 4.12.1 OK -
libpthread libpthread - POSIX threads library REQUIRED - 2.28 OK -
python-devel Python devel - Python development files REQUIRED 2.2 2.7.15 OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.8 OK -
python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.8 OK -
cups-ddk CUPS DDK - CUPS driver development kit OPTIONAL - - OK -
reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.6 OK -
pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.12.1 OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.2.8 OK -
python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.15 OK -
python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
libjpeg libjpeg - JPEG library REQUIRED - - OK -
sane SANE - Scanning library REQUIRED - - OK -
----------------------
| Scan Configuration |
----------------------
scanext Scan-SANE-Extension REQUIRED - 3.18.10 OK -
hpaio HPLIP-SANE-Backend REQUIRED - 3.18.10 OK 'hpaio found in /etc/sane.d/dll.conf'
-------------------------
| External Dependencies |
-------------------------
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.25 OK -
error: scanimage scanimage - Shell scanning program OPTIONAL 1.0 - MISSING 'scanimage needs to be installed'
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.8 OK 'CUPS Scheduler is running'
network network -wget OPTIONAL - 1.19.5 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
dbus DBus - Message bus system REQUIRED - 1.12.10 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
---------------------
| Python Extentions |
---------------------
hpmudext IO-Extension REQUIRED - 3.18.10 OK -
cupsext CUPS-Extension REQUIRED - 3.18.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
error: Failed to get Scanners information.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Brother-MFC-J5320DW
-------------------
Type: Unknown
Device URI: dnssd://Brother%20MFC-J5320DW._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055c584412
PPD: /etc/cups/ppd/Brother-MFC-J5320DW.ppd
PPD Description: Brother MFC-J5320DW CUPS
Printer status: Drucker Brother-MFC-J5320DW ist im Leerlauf. Aktiviert seit Mo 12 Nov 2018 14:50:16 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
HP_Officejet_Pro_8620
---------------------
Type: Printer
Device URI: hp:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: Unable to communicate with device (code=4): hp:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: unable to open channel
error: Communication status: Failed
HP_Officejet_Pro_8620_2
-----------------------
Type: Printer
Device URI: hp:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: Unable to communicate with device (code=4): hp:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: unable to open channel
error: Communication status: Failed
HP_Officejet_Pro_8620_3
-----------------------
Type: Printer
Device URI: hp:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: Unable to communicate with device (code=4): hp:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: unable to open channel
error: Communication status: Failed
HP_Officejet_Pro_8620_fax
-------------------------
Type: Fax
Device URI: hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: Unable to communicate with device (code=4): hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: unable to open channel
error: Communication status: Failed
Samsung-M283x-Series
--------------------
Type: Unknown
Device URI: dnssd://Samsung%20M283x%20Series%20(SEC30CDA73C8B6B)._printer._tcp.local/
PPD: /etc/cups/ppd/Samsung-M283x-Series.ppd
PPD Description: Samsung M283x Series
Printer status: Drucker Samsung-M283x-Series ist im Leerlauf. Aktiviert seit Di 13 Nov 2018 22:18:15 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Samsung-M283x-Series-2
----------------------
Type: Unknown
Device URI: dnssd://Samsung%20M283x%20Series%20(SEC30CDA73C8B6B)._printer._tcp.local/
PPD: /etc/cups/ppd/Samsung-M283x-Series-2.ppd
PPD Description: Samsung M283x Series
Printer status: Drucker Samsung-M283x-Series-2 ist im Leerlauf. Aktiviert seit Di 13 Nov 2018 22:36:25 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
error: 'sane-utils' package is missing/incompatible
Total Errors: 5
Total Warnings: 3
Done.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Hmm HP_Officejet_Pro_8620
---------------------
Type: Printer
Device URI: hp:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: Unable to communicate with device (code=4): hp:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: unable to open channel
error: Communication status: Failed Zeige noch mal ls -l /etc/cups/ppd/* scanimage -T
|
dbas
(Themenstarter)
Anmeldungsdatum: 2. März 2008
Beiträge: 292
|
da fehlt jetzt auch der Drucker... dbas@dbas:~$ ls -l /etc/cups/ppd/*
-rw-r----- 1 root lp 33353 Okt 20 2016 /etc/cups/ppd/Brother-MFC-J5320DW.ppd
-rw-r----- 1 root lp 6813 Apr 29 2018 /etc/cups/ppd/Brother_MFC_J5320DW.ppd
-rw-r----- 1 root lp 50423 Okt 15 16:21 /etc/cups/ppd/Samsung-M283x-Series-2.ppd
-rw-r----- 1 root lp 50423 Okt 15 16:18 /etc/cups/ppd/Samsung-M283x-Series.ppd
dbas@dbas:~$ scanimage -T
scanimage: symbol lookup error: scanimage: undefined symbol: md5_buffer
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Das merkwürdige ist eher das noch alle "alten" da sind HP_Officejet_Pro_8620
---------------------
Type: Printer
Device URI: hp:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: Unable to communicate with device (code=4): hp:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: unable to open channel
error: Communication status: Failed
HP_Officejet_Pro_8620_2
-----------------------
Type: Printer
Device URI: hp:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: Unable to communicate with device (code=4): hp:/net/HP_Officejet_Pro_8620?ip=192.168.178.38
error: unable to open channel
error: Communication status: Failed
HP_Officejet_Pro_8620_3 Mal ein Neustart ausführen.
|
dbas
(Themenstarter)
Anmeldungsdatum: 2. März 2008
Beiträge: 292
|
ne, brachte leider nichts.
Kann es sei, dass wir das Einstellungsmenü gelöscht haben in dem normalerweise die Druckerkonfiguration erfolgt?
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Nein,du meinst system-config-printer ?
|
dbas
(Themenstarter)
Anmeldungsdatum: 2. März 2008
Beiträge: 292
|
ja, es scheint aber da zu sein, nur über die Dash-Suche nicht auffindbar. Hat wohl erstmal nicht zu tun mit dem Drucker. Über die GUI (hp-toolbox) wird jetzt übrigens nur noch USB als Anbindung für den Drucker angeboten - entsprechend kein Drucker gefunden. Über system-config-printer wird der Drucker als Netzwerkdrucker erkannt. Hier nochmal der aktuelle Stand von hp-check: dbas@dbas:~$ hp-check -r
Saving output in log file: /home/dbas/hp-check.log
HP Linux Imaging and Printing System (ver. 3.18.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 12-18.10 version is not supported. Using 12-18.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.18.0-11-generic #12-Ubuntu SMP Tue Oct 23 19:22:37 UTC 2018 GNU/Linux
Host: dbas
Proc: 4.18.0-11-generic #12-Ubuntu SMP Tue Oct 23 19:22:37 UTC 2018 GNU/Linux
Distribution: 12 18.10
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.18.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.10 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.18.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.18.10
html=/usr/share/doc/hplip-3.18.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=no
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=no
dbus-build=yes
cups11-build=no
doc-build=no
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.18.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
qt5=no
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: Datei oder Verzeichnis nicht gefunden
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 16.11.2018 17:56:28
version = 3.18.10
[upgrade]
notify_upgrade = true
last_upgraded_time = 1542382939
pending_upgrade_time = 0
latest_available_version = 3.17.10
[settings]
systray_visible = 0
systray_messages = 0
[last_used]
device_uri = "hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.178.38"
printer_name =
working_dir = .
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------
| COMPILEDEP |
--------------
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 8.2.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
------------------------
| General Dependencies |
------------------------
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python-xml Python XML libraries REQUIRED - 2.2.6 OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 REQUIRED 4.0 4.12.1 OK -
libpthread libpthread - POSIX threads library REQUIRED - 2.28 OK -
python-devel Python devel - Python development files REQUIRED 2.2 2.7.15 OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.8 OK -
python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.8 OK -
cups-ddk CUPS DDK - CUPS driver development kit OPTIONAL - - OK -
reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.6 OK -
pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.12.1 OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.2.8 OK -
python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.15 OK -
python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
libjpeg libjpeg - JPEG library REQUIRED - - OK -
sane SANE - Scanning library REQUIRED - - OK -
----------------------
| Scan Configuration |
----------------------
scanext Scan-SANE-Extension REQUIRED - 3.18.10 OK -
hpaio HPLIP-SANE-Backend REQUIRED - 3.18.10 OK 'hpaio found in /etc/sane.d/dll.conf'
-------------------------
| External Dependencies |
-------------------------
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.25 OK -
error: scanimage scanimage - Shell scanning program OPTIONAL 1.0 - MISSING 'scanimage needs to be installed'
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.8 OK 'CUPS Scheduler is running'
network network -wget OPTIONAL - 1.19.5 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
dbus DBus - Message bus system REQUIRED - 1.12.10 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
---------------------
| Python Extentions |
---------------------
hpmudext IO-Extension REQUIRED - 3.18.10 OK -
cupsext CUPS-Extension REQUIRED - 3.18.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
error: Failed to get Scanners information.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
Brother-MFC-J5320DW
-------------------
Type: Unknown
Device URI: dnssd://Brother%20MFC-J5320DW._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055c584412
PPD: /etc/cups/ppd/Brother-MFC-J5320DW.ppd
PPD Description: Brother MFC-J5320DW CUPS
Printer status: Drucker Brother-MFC-J5320DW ist im Leerlauf. Aktiviert seit Mo 12 Nov 2018 14:50:16 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
HP-HP-Officejet-Pro-8620
------------------------
Type: Unknown
Device URI: dnssd://HP%20Officejet%20Pro%208620%20%5B9A1044%5D._ipp._tcp.local/?uuid=1c852a4d-b800-1f08-abcd-9457a59a1044
PPD: /etc/cups/ppd/HP-HP-Officejet-Pro-8620.ppd
PPD Description: HP Officejet Pro 8620, driverless, cups-filters 1.21.3
Printer status: Drucker HP-HP-Officejet-Pro-8620 ist im Leerlauf. Aktiviert seit Fr 16 Nov 2018 17:54:02 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Samsung-M283x-Series
--------------------
Type: Unknown
Device URI: dnssd://Samsung%20M283x%20Series%20(SEC30CDA73C8B6B)._printer._tcp.local/
PPD: /etc/cups/ppd/Samsung-M283x-Series.ppd
PPD Description: Samsung M283x Series
Printer status: Drucker Samsung-M283x-Series ist im Leerlauf. Aktiviert seit Di 13 Nov 2018 22:18:15 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
Samsung-M283x-Series-2
----------------------
Type: Unknown
Device URI: dnssd://Samsung%20M283x%20Series%20(SEC30CDA73C8B6B)._printer._tcp.local/
PPD: /etc/cups/ppd/Samsung-M283x-Series-2.ppd
PPD Description: Samsung M283x Series
Printer status: Drucker Samsung-M283x-Series-2 ist im Leerlauf. Aktiviert seit Di 13 Nov 2018 22:36:25 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
error: 'sane-utils' package is missing/incompatible
Total Errors: 1
Total Warnings: 4
|
dbas
(Themenstarter)
Anmeldungsdatum: 2. März 2008
Beiträge: 292
|
by the way: vielen Dank, dass Du mein Problem so engagiert zu lösen versuchst!
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Für das Netzwerk führe mal hp-setup -i Du kannst es aber auch über die GUI. >Device< dann >Setup Device< Wähle dabei Netzwerk.
|
dbas
(Themenstarter)
Anmeldungsdatum: 2. März 2008
Beiträge: 292
|
Netzwerk ist ausgegraut und es heißt: dbas@dbas:~$ hp-setup -i
HP Linux Imaging and Printing System (ver. 3.18.10)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
Using connection type: usb
error: No device selected/specified or that supports this functionality.
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ist schon manches mal Verrückt 😀 Zeige mal bitte scanimage -A Hast du das System hochgezogen auf 18.10 oder Neu Installiert?
|
dbas
(Themenstarter)
Anmeldungsdatum: 2. März 2008
Beiträge: 292
|
dbas@dbas:~$ scanimage -A
scanimage: symbol lookup error: scanimage: undefined symbol: md5_buffer
Ich habe ein Upgrade von 18.04 gemacht.
|