Hallo zusammen,
ich hatte den o.g. Drucker bereits vor längerer Zeit mal erfolgreich am Laufen und irgendwann hatten sich Funktionsdefizite eingeschlichen. Ich kann nicht sagen, wie diese zustanden gekommen sind und ob ggf. Updates in einem zeitlichen Zusammenhang damit standen. Letztlich möchte das Gerät nicht erfolgreich über die PC-Oberfläche gesteuert werden, insbesondere Drucken und Scannen machte permanent Probleme. Auch scannen auf Stick führt permanent zu kaputten Dateien. Letztlich habe ich das Gerät einfach nicht mehr genutzt. Irgendwie war zuviel los und nie die Zeit, dem Problem erfolgreich auf den Grund zu gehen. Ich hatte diverse Male hier im Forum und auch in restlichen Internet gesucht, aber keine erfolgreiche Behebung des Problems erreichen können.
Was mich stutzig gemacht hatte, war dass das Gerät in der Druckerübersicht mehrmals unter verschiedenen Bezeichnungen aufgetaucht war. Ich hatte dann irgendwann mal alle Geräte entfernt und eine Neuinstallation über USB versucht, da eine Ersteinrichtung über ausschließlich WLAN (Wlan-Betrieb wäre mir am liebsten) immer nach einem primären USB-Anschluss gefragt hatte.
Ich hoffe, mit eurer Hilfe den Drucker erfolgreich zum laufen zu bringen und ihn künftig nur noch über WLAN zu betreiben. Alternativ installiere ich ihn gerne mit eurer Hilfe einmal komplett neu, um die Probleme in de Griff zu bekommen.
Hier die gewünschten Abfragen, allerdings wurde hier "sudo" gefordert und eingegeben (im Gegensatz zur Beschreibung bei den geforderten Angaben):
Zuerst die Abfragen zwecks der Scanner-Probleme:
mitch@Meister-Lampe:~$ export SANE_DEBUG_DLL=255 && scanimage -L [13:10:00.225401] [sanei_debug] Setting debug level of dll to 255. [13:10:00.225543] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.1.1-debian [13:10:00.225580] [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [13:10:00.225649] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [13:10:00.225704] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [13:10:00.225758] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/airscan [13:10:00.225810] [dll] sane_init/read_config: reading dll.d/airscan [13:10:00.225860] [dll] add_backend: adding backend `airscan' [13:10:00.225895] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [13:10:00.225945] [dll] sane_init/read_config: reading dll.d/hplip [13:10:00.225980] [dll] add_backend: adding backend `hpaio' [13:10:00.226019] [dll] sane_init/read_dlld: done. [13:10:00.226073] [dll] sane_init/read_config: reading dll.conf [13:10:00.226117] [dll] add_backend: adding backend `net' [13:10:00.226144] [dll] add_backend: adding backend `abaton' [13:10:00.226170] [dll] add_backend: adding backend `agfafocus' [13:10:00.226195] [dll] add_backend: adding backend `apple' [13:10:00.226220] [dll] add_backend: adding backend `artec' [13:10:00.226246] [dll] add_backend: adding backend `artec_eplus48u' [13:10:00.226271] [dll] add_backend: adding backend `as6e' [13:10:00.226296] [dll] add_backend: adding backend `avision' [13:10:00.226321] [dll] add_backend: adding backend `bh' [13:10:00.226346] [dll] add_backend: adding backend `canon' [13:10:00.226371] [dll] add_backend: adding backend `canon630u' [13:10:00.226396] [dll] add_backend: adding backend `canon_dr' [13:10:00.226421] [dll] add_backend: adding backend `canon_lide70' [13:10:00.226447] [dll] add_backend: adding backend `cardscan' [13:10:00.226473] [dll] add_backend: adding backend `coolscan' [13:10:00.226498] [dll] add_backend: adding backend `coolscan3' [13:10:00.226525] [dll] add_backend: adding backend `dell1600n_net' [13:10:00.226550] [dll] add_backend: adding backend `dmc' [13:10:00.226576] [dll] add_backend: adding backend `epjitsu' [13:10:00.226601] [dll] add_backend: adding backend `epson2' [13:10:00.226626] [dll] add_backend: adding backend `epsonds' [13:10:00.226653] [dll] add_backend: adding backend `escl' [13:10:00.226678] [dll] add_backend: adding backend `fujitsu' [13:10:00.226704] [dll] add_backend: adding backend `genesys' [13:10:00.226729] [dll] add_backend: adding backend `gt68xx' [13:10:00.226755] [dll] add_backend: adding backend `hp' [13:10:00.226780] [dll] add_backend: adding backend `hp3500' [13:10:00.226805] [dll] add_backend: adding backend `hp3900' [13:10:00.226831] [dll] add_backend: adding backend `hp4200' [13:10:00.226857] [dll] add_backend: adding backend `hp5400' [13:10:00.226882] [dll] add_backend: adding backend `hp5590' [13:10:00.226907] [dll] add_backend: adding backend `hpljm1005' [13:10:00.226933] [dll] add_backend: adding backend `hpsj5s' [13:10:00.226959] [dll] add_backend: adding backend `hs2p' [13:10:00.226984] [dll] add_backend: adding backend `ibm' [13:10:00.227016] [dll] add_backend: adding backend `kodak' [13:10:00.227042] [dll] add_backend: adding backend `kodakaio' [13:10:00.227069] [dll] add_backend: adding backend `kvs1025' [13:10:00.227094] [dll] add_backend: adding backend `kvs20xx' [13:10:00.227120] [dll] add_backend: adding backend `kvs40xx' [13:10:00.227145] [dll] add_backend: adding backend `leo' [13:10:00.227199] [dll] add_backend: adding backend `lexmark' [13:10:00.227231] [dll] add_backend: adding backend `ma1509' [13:10:00.227261] [dll] add_backend: adding backend `magicolor' [13:10:00.227288] [dll] add_backend: adding backend `matsushita' [13:10:00.227314] [dll] add_backend: adding backend `microtek' [13:10:00.227340] [dll] add_backend: adding backend `microtek2' [13:10:00.227366] [dll] add_backend: adding backend `mustek' [13:10:00.227392] [dll] add_backend: adding backend `mustek_usb' [13:10:00.227418] [dll] add_backend: adding backend `mustek_usb2' [13:10:00.227444] [dll] add_backend: adding backend `nec' [13:10:00.227469] [dll] add_backend: adding backend `niash' [13:10:00.227495] [dll] add_backend: adding backend `pie' [13:10:00.227521] [dll] add_backend: adding backend `pieusb' [13:10:00.227547] [dll] add_backend: adding backend `pint' [13:10:00.227572] [dll] add_backend: adding backend `pixma' [13:10:00.227597] [dll] add_backend: adding backend `plustek' [13:10:00.227624] [dll] add_backend: adding backend `qcam' [13:10:00.227657] [dll] add_backend: adding backend `ricoh' [13:10:00.227683] [dll] add_backend: adding backend `ricoh2' [13:10:00.227709] [dll] add_backend: adding backend `rts8891' [13:10:00.227735] [dll] add_backend: adding backend `s9036' [13:10:00.227761] [dll] add_backend: adding backend `sceptre' [13:10:00.227787] [dll] add_backend: adding backend `sharp' [13:10:00.227813] [dll] add_backend: adding backend `sm3600' [13:10:00.227838] [dll] add_backend: adding backend `sm3840' [13:10:00.227864] [dll] add_backend: adding backend `snapscan' [13:10:00.227890] [dll] add_backend: adding backend `sp15c' [13:10:00.227916] [dll] add_backend: adding backend `tamarack' [13:10:00.227943] [dll] add_backend: adding backend `teco1' [13:10:00.227969] [dll] add_backend: adding backend `teco2' [13:10:00.227995] [dll] add_backend: adding backend `teco3' [13:10:00.228021] [dll] add_backend: adding backend `u12' [13:10:00.228046] [dll] add_backend: adding backend `umax' [13:10:00.228072] [dll] add_backend: adding backend `umax1220u' [13:10:00.228098] [dll] add_backend: adding backend `v4l' [13:10:00.228124] [dll] add_backend: adding backend `xerox_mfp' [13:10:00.228198] [dll] sane_get_devices [13:10:00.228225] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.228252] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [13:10:00.228292] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [13:10:00.228617] [dll] init: initializing backend `xerox_mfp' [13:10:00.247397] [dll] init: backend `xerox_mfp' is version 1.0.13 [13:10:00.247684] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.247714] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [13:10:00.247752] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory) [13:10:00.247779] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1' [13:10:00.247813] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory) [13:10:00.247841] [dll] load: trying to load `/usr/lib64/sane/libsane-v4l.so.1' [13:10:00.247875] [dll] load: couldn't open `/usr/lib64/sane/libsane-v4l.so.1' (No such file or directory) [13:10:00.247901] [dll] load: couldn't find backend `v4l' (No such file or directory) [13:10:00.247928] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.247954] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [13:10:00.247994] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [13:10:00.248312] [dll] init: initializing backend `umax1220u' [13:10:00.266880] [dll] init: backend `umax1220u' is version 1.0.2 [13:10:00.266915] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.266944] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [13:10:00.266985] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [13:10:00.267339] [dll] init: initializing backend `umax' [13:10:00.284765] [dll] init: backend `umax' is version 1.0.45 [13:10:00.284786] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.284794] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [13:10:00.284807] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [13:10:00.284950] [dll] init: initializing backend `u12' [13:10:00.291097] [dll] init: backend `u12' is version 1.0.0 [13:10:00.291128] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.291136] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [13:10:00.291149] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [13:10:00.291257] [dll] init: initializing backend `teco3' [13:10:00.293425] [dll] init: backend `teco3' is version 1.0.1 [13:10:00.293443] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.293451] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [13:10:00.293464] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [13:10:00.293547] [dll] init: initializing backend `teco2' [13:10:00.297480] [dll] init: backend `teco2' is version 1.0.10 [13:10:00.297490] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.297500] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [13:10:00.297513] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [13:10:00.297604] [dll] init: initializing backend `teco1' [13:10:00.300147] [dll] init: backend `teco1' is version 1.0.10 [13:10:00.300166] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.300174] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [13:10:00.300187] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [13:10:00.300273] [dll] init: initializing backend `tamarack' [13:10:00.301363] [dll] init: backend `tamarack' is version 1.0.0 [13:10:00.301382] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.301390] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [13:10:00.301402] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [13:10:00.301488] [dll] init: initializing backend `sp15c' [13:10:00.301880] [dll] init: backend `sp15c' is version 1.0.0 [13:10:00.301891] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.301902] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [13:10:00.301915] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [13:10:00.302033] [dll] init: initializing backend `snapscan' [13:10:00.309747] [dll] init: backend `snapscan' is version 1.4.53 [13:10:00.309773] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.309782] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [13:10:00.309795] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [13:10:00.309917] [dll] init: initializing backend `sm3840' [13:10:00.316071] [dll] init: backend `sm3840' is version 1.0.0 [13:10:00.316091] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.316099] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [13:10:00.316112] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [13:10:00.316271] [dll] init: initializing backend `sm3600' [13:10:00.322345] [dll] init: backend `sm3600' is version 1.0.6 [13:10:00.322365] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.322373] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [13:10:00.322386] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [13:10:00.322521] [dll] init: initializing backend `sharp' [13:10:00.323656] [dll] init: backend `sharp' is version 1.0.0 [13:10:00.323675] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.323683] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [13:10:00.323696] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [13:10:00.323783] [dll] init: initializing backend `sceptre' [13:10:00.324880] [dll] init: backend `sceptre' is version 1.0.10 [13:10:00.324899] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.324908] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [13:10:00.324921] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [13:10:00.324994] [dll] init: initializing backend `s9036' [13:10:00.325733] [dll] init: backend `s9036' is version 1.0.0 [13:10:00.325751] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.325759] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [13:10:00.325771] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [13:10:00.325904] [dll] init: initializing backend `rts8891' [13:10:00.331989] [dll] init: backend `rts8891' is version 1.0.2401 [13:10:00.332088] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.332099] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1' [13:10:00.332112] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1' [13:10:00.332228] [dll] init: initializing backend `ricoh2' [13:10:00.338347] [dll] init: backend `ricoh2' is version 1.0.0 [13:10:00.338366] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.338375] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [13:10:00.338388] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [13:10:00.338513] [dll] init: initializing backend `ricoh' [13:10:00.339289] [dll] init: backend `ricoh' is version 1.0.0 [13:10:00.339308] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.339316] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [13:10:00.339329] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [13:10:00.339405] [dll] init: initializing backend `qcam' [13:10:00.339438] [dll] init: backend `qcam' is version 1.0.0 [13:10:00.339449] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.339457] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [13:10:00.339472] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [13:10:00.339595] [dll] init: initializing backend `plustek' [13:10:00.345780] [dll] init: backend `plustek' is version 1.0.0 [13:10:00.345800] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.345809] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [13:10:00.345822] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [13:10:00.345978] [dll] init: initializing backend `pixma' [13:10:00.352151] [dll] init: backend `pixma' is version 1.0.28 [13:10:00.873404] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.873465] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' [13:10:00.873492] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory) [13:10:00.873508] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1' [13:10:00.873544] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory) [13:10:00.873562] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1' [13:10:00.873586] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory) [13:10:00.873603] [dll] load: couldn't find backend `pint' (No such file or directory) [13:10:00.873621] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.873639] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1' [13:10:00.873669] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1' [13:10:00.873985] [dll] init: initializing backend `pieusb' [13:10:00.884499] [dll] init: backend `pieusb' is version 1.0.1 [13:10:00.884527] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.884540] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [13:10:00.884559] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [13:10:00.884681] [dll] init: initializing backend `pie' [13:10:00.887396] [dll] init: backend `pie' is version 1.0.9 [13:10:00.887417] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.887427] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [13:10:00.887443] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [13:10:00.887572] [dll] init: initializing backend `niash' [13:10:00.894298] [dll] init: backend `niash' is version 1.0.1 [13:10:00.894320] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.894328] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [13:10:00.894341] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [13:10:00.894466] [dll] init: initializing backend `nec' [13:10:00.895240] [dll] init: backend `nec' is version 1.0.0 [13:10:00.895258] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.895266] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [13:10:00.895280] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [13:10:00.895391] [dll] init: initializing backend `mustek_usb2' [13:10:00.895410] [dll] init: backend `mustek_usb2' is version 1.0.10 [13:10:00.901353] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.901364] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [13:10:00.901383] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [13:10:00.901530] [dll] init: initializing backend `mustek_usb' [13:10:00.907749] [dll] init: backend `mustek_usb' is version 1.0.18 [13:10:00.907771] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.907779] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [13:10:00.907792] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [13:10:00.907982] [dll] init: initializing backend `mustek' [13:10:00.909580] [dll] init: backend `mustek' is version 1.0.138 [13:10:00.909598] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.909607] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [13:10:00.909619] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [13:10:00.909718] [dll] init: initializing backend `microtek2' [13:10:00.910833] [dll] init: backend `microtek2' is version 1.0.0 [13:10:00.910857] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.910866] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [13:10:00.910879] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [13:10:00.910967] [dll] init: initializing backend `microtek' [13:10:00.912200] [dll] init: backend `microtek' is version 1.0.0 [13:10:00.912218] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.912226] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [13:10:00.912239] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [13:10:00.912326] [dll] init: initializing backend `matsushita' [13:10:00.914821] [dll] init: backend `matsushita' is version 1.0.7 [13:10:00.914839] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:00.914847] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [13:10:00.914860] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [13:10:00.916189] [dll] init: initializing backend `magicolor' [13:10:00.922489] [dll] init: backend `magicolor' is version 1.0.1 [13:10:02.475701] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:02.475751] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [13:10:02.475809] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [13:10:02.476273] [dll] init: initializing backend `ma1509' [13:10:02.494740] [dll] init: backend `ma1509' is version 1.0.3 [13:10:02.494783] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:02.494808] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [13:10:02.494854] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [13:10:02.495233] [dll] init: initializing backend `lexmark' [13:10:02.513690] [dll] init: backend `lexmark' is version 1.0.32 [13:10:02.513980] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:02.514010] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [13:10:02.514051] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [13:10:02.514296] [dll] init: initializing backend `leo' [13:10:02.518639] [dll] init: backend `leo' is version 1.0.11 [13:10:02.518672] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:02.518697] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1' [13:10:02.518747] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1' [13:10:02.519063] [dll] init: initializing backend `kvs40xx' [13:10:02.537743] [dll] init: backend `kvs40xx' is version 1.0.1 [13:10:02.540992] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:02.541028] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [13:10:02.541092] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [13:10:02.541444] [dll] init: initializing backend `kvs20xx' [13:10:02.558342] [dll] init: backend `kvs20xx' is version 1.0.2 [13:10:02.561734] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:02.561756] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [13:10:02.561775] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [13:10:02.561952] [dll] init: initializing backend `kvs1025' [13:10:02.570459] [dll] init: backend `kvs1025' is version 1.0.5 [13:10:02.570473] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:02.570483] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [13:10:02.570499] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [13:10:02.571656] [dll] init: initializing backend `kodakaio' [13:10:02.578746] [dll] init: backend `kodakaio' is version 1.0.3 [13:10:04.411921] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.411978] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [13:10:04.412036] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [13:10:04.412413] [dll] init: initializing backend `kodak' [13:10:04.412472] [dll] init: backend `kodak' is version 1.0.7 [13:10:04.413733] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.413773] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [13:10:04.413810] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [13:10:04.414046] [dll] init: initializing backend `ibm' [13:10:04.416247] [dll] init: backend `ibm' is version 1.0.0 [13:10:04.416287] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.416311] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [13:10:04.416355] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [13:10:04.416585] [dll] init: initializing backend `hs2p' [13:10:04.419789] [dll] init: backend `hs2p' is version 1.0.0 [13:10:04.419821] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.419845] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [13:10:04.419882] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [13:10:04.420129] [dll] init: initializing backend `hpsj5s' [13:10:04.420251] [dll] init: backend `hpsj5s' is version 1.0.3 [13:10:04.420280] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.420308] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [13:10:04.420349] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [13:10:04.420662] [dll] init: initializing backend `hpljm1005' [13:10:04.439053] [dll] init: backend `hpljm1005' is version 1.0.1 [13:10:04.439088] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.439117] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [13:10:04.439373] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [13:10:04.439792] [dll] init: initializing backend `hp5590' [13:10:04.457763] [dll] init: backend `hp5590' is version 1.0.8 [13:10:04.457801] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.457826] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [13:10:04.457876] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [13:10:04.458280] [dll] init: initializing backend `hp5400' [13:10:04.476621] [dll] init: backend `hp5400' is version 1.0.3 [13:10:04.476660] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.476685] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [13:10:04.476734] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [13:10:04.477074] [dll] init: initializing backend `hp4200' [13:10:04.494180] [dll] init: backend `hp4200' is version 1.0.0 [13:10:04.494207] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.494223] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [13:10:04.494248] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [13:10:04.495101] [dll] init: initializing backend `hp3900' [13:10:04.505215] [dll] init: backend `hp3900' is version 1.0.0 [13:10:04.505243] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.505255] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [13:10:04.505274] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [13:10:04.505457] [dll] init: initializing backend `hp3500' [13:10:04.512914] [dll] init: backend `hp3500' is version 1.0.0 [13:10:04.512934] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.512943] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [13:10:04.512955] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [13:10:04.513140] [dll] init: initializing backend `hp' [13:10:04.513166] [dll] init: backend `hp' is version 1.0.8 [13:10:04.520364] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.520384] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [13:10:04.520397] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [13:10:04.520579] [dll] init: initializing backend `gt68xx' [13:10:04.526940] [dll] init: backend `gt68xx' is version 1.0.84 [13:10:04.527097] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.527108] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [13:10:04.527124] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [13:10:04.527569] [dll] init: initializing backend `genesys' [13:10:04.534363] [dll] init: backend `genesys' is version 1.0.0 [13:10:04.534479] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.534490] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [13:10:04.534503] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [13:10:04.534637] [dll] init: initializing backend `fujitsu' [13:10:04.534656] [dll] init: backend `fujitsu' is version 1.0.137 [13:10:04.541226] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:04.541247] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1' [13:10:04.541261] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1' [13:10:04.552381] [dll] init: initializing backend `escl' [13:10:04.552418] [dll] init: backend `escl' is version 1.0.0 [13:10:05.569345] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:05.569404] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [13:10:05.569451] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [13:10:05.570157] [dll] init: initializing backend `epsonds' [13:10:05.588590] [dll] init: backend `epsonds' is version 1.0.0 [13:10:06.605760] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:06.605823] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [13:10:06.605870] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [13:10:06.606452] [dll] init: initializing backend `epson2' [13:10:06.624944] [dll] init: backend `epson2' is version 1.0.124 [13:10:07.627483] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:07.627536] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [13:10:07.627586] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [13:10:07.628083] [dll] init: initializing backend `epjitsu' [13:10:07.628130] [dll] init: backend `epjitsu' is version 1.0.31 [13:10:07.646549] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:07.646587] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [13:10:07.646625] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [13:10:07.646920] [dll] init: initializing backend `dmc' [13:10:07.649185] [dll] init: backend `dmc' is version 1.0.0 [13:10:07.649217] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:07.649242] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [13:10:07.649279] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [13:10:07.649639] [dll] init: initializing backend `dell1600n_net' [13:10:07.649675] [dll] init: backend `dell1600n_net' is version 1.0.0 [13:10:07.951370] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:07.951429] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [13:10:07.951474] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [13:10:07.951929] [dll] init: initializing backend `coolscan3' [13:10:07.970225] [dll] init: backend `coolscan3' is version 1.0.0 [13:10:07.971531] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:07.971572] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [13:10:07.971611] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [13:10:07.972031] [dll] init: initializing backend `coolscan' [13:10:07.975436] [dll] init: backend `coolscan' is version 1.0.0 [13:10:07.975471] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:07.975495] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [13:10:07.975532] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [13:10:07.975869] [dll] init: initializing backend `cardscan' [13:10:07.994130] [dll] init: backend `cardscan' is version 1.0.3 [13:10:07.994323] [dll] load: searching backend `canon_lide70' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:07.994353] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1' [13:10:07.994396] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1' [13:10:07.994788] [dll] init: initializing backend `canon_lide70' [13:10:08.013221] [dll] init: backend `canon_lide70' is version 1.0.0 [13:10:08.013261] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.013285] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [13:10:08.013323] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [13:10:08.013732] [dll] init: initializing backend `canon_dr' [13:10:08.013793] [dll] init: backend `canon_dr' is version 1.0.62 [13:10:08.033445] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.033474] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [13:10:08.033500] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [13:10:08.033764] [dll] init: initializing backend `canon630u' [13:10:08.043680] [dll] init: backend `canon630u' is version 1.0.1 [13:10:08.043710] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.043723] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [13:10:08.043743] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [13:10:08.043941] [dll] init: initializing backend `canon' [13:10:08.044483] [dll] init: backend `canon' is version 1.0.0 [13:10:08.044497] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.044507] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [13:10:08.044525] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [13:10:08.044640] [dll] init: initializing backend `bh' [13:10:08.045972] [dll] init: backend `bh' is version 1.0.4 [13:10:08.045995] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.046005] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [13:10:08.046021] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [13:10:08.046190] [dll] init: initializing backend `avision' [13:10:08.076419] [dll] init: backend `avision' is version 1.0.297 [13:10:08.099904] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.099917] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [13:10:08.099931] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [13:10:08.100094] [dll] init: initializing backend `as6e' [13:10:08.100136] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.100147] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [13:10:08.100162] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [13:10:08.100299] [dll] init: initializing backend `artec_eplus48u' [13:10:08.106541] [dll] init: backend `artec_eplus48u' is version 1.0.0 [13:10:08.106553] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.106561] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [13:10:08.106574] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [13:10:08.106689] [dll] init: initializing backend `artec' [13:10:08.107813] [dll] init: backend `artec' is version 1.0.0 [13:10:08.107824] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.107839] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [13:10:08.107854] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [13:10:08.107945] [dll] init: initializing backend `apple' [13:10:08.109059] [dll] init: backend `apple' is version 1.0.0 [13:10:08.109070] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.109078] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [13:10:08.109102] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [13:10:08.109204] [dll] init: initializing backend `agfafocus' [13:10:08.109950] [dll] init: backend `agfafocus' is version 1.0.0 [13:10:08.109968] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.109976] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [13:10:08.109990] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [13:10:08.110076] [dll] init: initializing backend `abaton' [13:10:08.111184] [dll] init: backend `abaton' is version 1.0.0 [13:10:08.111197] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.111213] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [13:10:08.111228] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [13:10:08.111415] [dll] init: initializing backend `net' [13:10:08.114940] [dll] init: backend `net' is version 1.1.1 [13:10:08.114984] [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:08.115008] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [13:10:08.115043] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [13:10:08.116740] [dll] init: initializing backend `hpaio' [13:10:08.117486] [dll] init: backend `hpaio' is version 1.0.0 [13:10:09.172804] [dll] load: searching backend `airscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [13:10:09.172839] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-airscan.so.1' [13:10:09.172857] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-airscan.so.1' [13:10:09.173391] [dll] init: initializing backend `airscan' [13:10:09.180326] [dll] init: backend `airscan' is version 1.0.0 [13:10:12.412334] [dll] sane_get_devices: found 6 devices device `escl:http://localhost:60000' is a HP PageWide Pro 477dw MFP [5BCEFE] (USB) platen,adf scanner device `hpaio:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY' is a Hewlett-Packard HP_PageWide_Pro_477dw_MFP all-in-one device `hpaio:/net/hp_pagewide_pro_477dw_mfp?ip=192.168.178.29&queue=false' is a Hewlett-Packard hp_pagewide_pro_477dw_mfp all-in-one device `hpaio:/net/hp_pagewide_pro_477dw_mfp?ip=127.0.0.1&queue=false' is a Hewlett-Packard hp_pagewide_pro_477dw_mfp all-in-one device `airscan:e0:HP PageWide Pro 477dw MFP [5BCEFE]' is a eSCL HP PageWide Pro 477dw MFP [5BCEFE] ip=192.168.178.29 device `airscan:e1:HP PageWide Pro 477dw MFP [5BCEFE] (USB)' is a eSCL HP PageWide Pro 477dw MFP [5BCEFE] (USB) ip=127.0.0.1 [13:10:12.412491] [dll] sane_exit: exiting [13:10:12.412524] [dll] sane_exit: calling backend `xerox_mfp's exit function [13:10:12.412745] [dll] sane_exit: calling backend `umax1220u's exit function [13:10:12.412886] [dll] sane_exit: calling backend `umax's exit function [13:10:12.413034] [dll] sane_exit: calling backend `u12's exit function [13:10:12.413172] [dll] sane_exit: calling backend `teco3's exit function [13:10:12.413303] [dll] sane_exit: calling backend `teco2's exit function [13:10:12.413429] [dll] sane_exit: calling backend `teco1's exit function [13:10:12.413558] [dll] sane_exit: calling backend `tamarack's exit function [13:10:12.413680] [dll] sane_exit: calling backend `sp15c's exit function [13:10:12.413802] [dll] sane_exit: calling backend `snapscan's exit function [13:10:12.413938] [dll] sane_exit: calling backend `sm3840's exit function [13:10:12.414068] [dll] sane_exit: calling backend `sm3600's exit function [13:10:12.414199] [dll] sane_exit: calling backend `sharp's exit function [13:10:12.414324] [dll] sane_exit: calling backend `sceptre's exit function [13:10:12.414451] [dll] sane_exit: calling backend `s9036's exit function [13:10:12.414570] [dll] sane_exit: calling backend `rts8891's exit function [13:10:12.414720] [dll] sane_exit: calling backend `ricoh2's exit function [13:10:12.414879] [dll] sane_exit: calling backend `ricoh's exit function [13:10:12.414997] [dll] sane_exit: calling backend `qcam's exit function [13:10:12.415113] [dll] sane_exit: calling backend `plustek's exit function [13:10:12.415284] [dll] sane_exit: calling backend `pixma's exit function [13:10:12.415449] [dll] sane_exit: calling backend `pieusb's exit function [13:10:12.415582] [dll] sane_exit: calling backend `pie's exit function [13:10:12.415703] [dll] sane_exit: calling backend `niash's exit function [13:10:12.415829] [dll] sane_exit: calling backend `nec's exit function [13:10:12.415949] [dll] sane_exit: calling backend `mustek_usb2's exit function [13:10:12.416079] [dll] sane_exit: calling backend `mustek_usb's exit function [13:10:12.416218] [dll] sane_exit: calling backend `mustek's exit function [13:10:12.416348] [dll] sane_exit: calling backend `microtek2's exit function [13:10:12.416473] [dll] sane_exit: calling backend `microtek's exit function [13:10:12.416595] [dll] sane_exit: calling backend `matsushita's exit function [13:10:12.416710] [dll] sane_exit: calling backend `magicolor's exit function [13:10:12.416843] [dll] sane_exit: calling backend `ma1509's exit function [13:10:12.416969] [dll] sane_exit: calling backend `lexmark's exit function [13:10:12.417125] [dll] sane_exit: calling backend `leo's exit function [13:10:12.417243] [dll] sane_exit: calling backend `kvs40xx's exit function [13:10:12.417366] [dll] sane_exit: calling backend `kvs20xx's exit function [13:10:12.417499] [dll] sane_exit: calling backend `kvs1025's exit function [13:10:12.417631] [dll] sane_exit: calling backend `kodakaio's exit function [13:10:12.417763] [dll] sane_exit: calling backend `kodak's exit function [13:10:12.417883] [dll] sane_exit: calling backend `ibm's exit function [13:10:12.417994] [dll] sane_exit: calling backend `hs2p's exit function [13:10:12.418113] [dll] sane_exit: calling backend `hpsj5s's exit function [13:10:12.418253] [dll] sane_exit: calling backend `hpljm1005's exit function [13:10:12.418371] [dll] sane_exit: calling backend `hp5590's exit function [13:10:12.418499] [dll] sane_exit: calling backend `hp5400's exit function [13:10:12.418619] [dll] sane_exit: calling backend `hp4200's exit function [13:10:12.418739] [dll] sane_exit: calling backend `hp3900's exit function [13:10:12.418878] [dll] sane_exit: calling backend `hp3500's exit function [13:10:12.419008] [dll] sane_exit: calling backend `hp's exit function [13:10:12.419138] [dll] sane_exit: calling backend `gt68xx's exit function [13:10:12.419307] [dll] sane_exit: calling backend `genesys's exit function [13:10:12.419752] [dll] sane_exit: calling backend `fujitsu's exit function [13:10:12.419887] [dll] sane_exit: calling backend `escl's exit function [13:10:12.421645] [dll] sane_exit: calling backend `epsonds's exit function [13:10:12.421775] [dll] sane_exit: calling backend `epson2's exit function [13:10:12.421891] [dll] sane_exit: calling backend `epjitsu's exit function [13:10:12.422007] [dll] sane_exit: calling backend `dmc's exit function [13:10:12.422105] [dll] sane_exit: calling backend `dell1600n_net's exit function [13:10:12.422351] [dll] sane_exit: calling backend `coolscan3's exit function [13:10:12.422454] [dll] sane_exit: calling backend `coolscan's exit function [13:10:12.422558] [dll] sane_exit: calling backend `cardscan's exit function [13:10:12.422655] [dll] sane_exit: calling backend `canon_lide70's exit function [13:10:12.422755] [dll] sane_exit: calling backend `canon_dr's exit function [13:10:12.422857] [dll] sane_exit: calling backend `canon630u's exit function [13:10:12.422953] [dll] sane_exit: calling backend `canon's exit function [13:10:12.423043] [dll] sane_exit: calling backend `bh's exit function [13:10:12.423133] [dll] sane_exit: calling backend `avision's exit function [13:10:12.423306] [dll] sane_exit: calling backend `artec_eplus48u's exit function [13:10:12.423407] [dll] sane_exit: calling backend `artec's exit function [13:10:12.423501] [dll] sane_exit: calling backend `apple's exit function [13:10:12.423583] [dll] sane_exit: calling backend `agfafocus's exit function [13:10:12.423675] [dll] sane_exit: calling backend `abaton's exit function [13:10:12.423759] [dll] sane_exit: calling backend `net's exit function [13:10:12.424725] [dll] sane_exit: calling backend `hpaio's exit function [13:10:12.425467] [dll] sane_exit: calling backend `airscan's exit function [13:10:12.429265] [dll] sane_exit: finished
itch@Meister-Lampe:~$ sudo dpkg -l *sane* | grep ii [sudo] Passwort für mitch: ii libsane-common 1.1.1-5 all API library for scanners -- documentation and support files ii libsane-hpaio:amd64 3.21.12+dfsg0-1 amd64 HP SANE backend for multi-function peripherals ii libsane1:amd64 1.1.1-5 amd64 API library for scanners ii sane-airscan 0.99.27-1build1 amd64 SANE backend for AirScan (eSCL) and WSD document scanner ii sane-utils 1.1.1-5 amd64 API library for scanners -- utilities
mitch@Meister-Lampe:~$ sudo dpkg -l libusb* | grep ii ii libusb-0.1-4:amd64 2:0.1.12-32build3 amd64 userspace USB programming library ii libusb-1.0-0:amd64 2:1.0.25-1ubuntu2 amd64 userspace USB programming library ii libusb-1.0-0:i386 2:1.0.25-1ubuntu2 i386 userspace USB programming library ii libusb-dev 2:0.1.12-32build3 amd64 userspace USB programming library development files ii libusbmuxd6:amd64 2.0.2-3build2 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library
mitch@Meister-Lampe:~$ sudo dpkg -l | egrep Brother ii printer-driver-brlaser 6-3 amd64 printer driver for (some) Brother laser printers ii printer-driver-ptouch 1.6-2build1 amd64 printer driver Brother P-touch label printers
mitch@Meister-Lampe:~$ sudo dpkg -l | egrep hp ii hplip 3.21.12+dfsg0-1 amd64 HP Linux Printing and Imaging System (HPLIP) ii hplip-data 3.21.12+dfsg0-1 all HP Linux Printing and Imaging - data files ii hplip-gui 3.21.12+dfsg0-1 all HP Linux Printing and Imaging - GUI utilities (Qt-based) ii libhpmud0:amd64 3.21.12+dfsg0-1 amd64 HP Multi-Point Transport Driver (hpmud) run-time libraries ii libsane-hpaio:amd64 3.21.12+dfsg0-1 amd64 HP SANE backend for multi-function peripherals ii printer-driver-hpcups 3.21.12+dfsg0-1 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups) ii printer-driver-postscript-hp 3.21.12+dfsg0-1 amd64 HP Printers PostScript Descriptions ii python3-launchpadlib 1.10.16-1 all Launchpad web services client library (Python 3)
mitch@Meister-Lampe:~$ sudo dpkg -l | egrep 'iscan*|esci-*|epson'
mitch@Meister-Lampe:~$ sudo dpkg -l | egrep 'scangear*|cnij*'
mitch@Meister-Lampe:~$ sudo updatedb && locate libsane-smfp.so sudo: updatedb: Befehl nicht gefunden
mitch@Meister-Lampe:~$ systemctl --no-pager status sane*
mitch@Meister-Lampe:~$ hp-info -i
HP Linux Imaging and Printing System (ver. 3.21.12)
Device Information Utility ver. 5.2
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.21.12)
System Tray Status Service ver. 2.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway.
hp:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY
error: Channel write error
error: Channel write error
error: Channel write error
Device Parameters (dynamic data):
Parameter Value(s)
---------------------------- ----------------------------------------------------------
back-end hp
cups-printers ['HP-PageWide-Pro-477dw-MFP']
cups-uri hp:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY
dev-file
device-state 1
device-uri hp:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY
deviceid MFG:HP;MDL:HP PageWide Pro 477dw
MFP;CMD:PCL5c,PCLXL,POSTSCRIPT,NATIVEOFFICE,PDF,PCL3GUI,PC
L3,PJL,Automatic,JPEG,PCLM,AppleRaster,PWGRaster,802.11,80
2.3,DESKJET,DYN;CLS:PRINTER;DES:D3Q20B;CID:HPIJPDLV1;LEDMD
IS:USB#FF#CC#00,USB#FF#04#01;MCT:MF;MCL:DI;MCV:3.1;SN:CN87
KHX0TY;S:038080C484100001005800000004600000045000000440000
0041000000;Z:05000009000005000005000005000005,12000,170000
00000000000000000000000000,181;
error-state 101
fax-uri hpfax:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY
host
is-hp True
panel 0
panel-line1
panel-line2
port 1
r 0
rg 000
rr 000000
rs 000000000
scan-uri hpaio:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY
serial CN87KHX0TY
status-code 5002
status-desc Device is busy, powered down, or unplugged
Model Parameters (static data):
Parameter Value(s)
---------------------------- ----------------------------------------------------------
align-type 0
clean-type 0
color-cal-type 0
copy-type 0
embedded-server-type 1
family-class ['Undefined']
family-ppd hp-postscript-inkjet.ppd
fax-type 6
fw-download False
icon hp_color_laserjet_cp2025.png
io-mfp-mode 1
io-mode 1
io-support 14
job-storage 0
linefeed-cal-type 0
model HP_PageWide_Pro_477dw_MFP
model-ui HP Pagewide Pro 477dw MFP
model1 HP PageWide Pro 477dw Multifunction Printer
monitor-type 0
panel-check-type 0
pcard-type 0
plugin 0
plugin-reason 0
power-settings 0
ppd-name pagewide_pro_477_mfp-ps.ppd
pq-diag-type 0
r-type 0
scan-src 3
scan-type 7
status-battery-check 0
status-dynamic-counters 0
status-type 10
support-released True
support-subtype 18627
support-type 2
support-ver 3.16.3
tech-class ['Postscript']
tech-subclass ['Normal']
tech-type 4
usb-pid 54545
usb-vid 1008
wifi-config 3
Status History (most recent first):
Date/Time Code Status Description User Job ID
-------------------- ----- ---------------------------------------- -------- --------
07/18/23 13:17:38 5002 Device is busy, powered down, or mitch 0
unplugged
Done.mitch@Meister-Lampe:~$ uname -rm 5.19.0-46-generic x86_64
mitch@Meister-Lampe:~$ lsusb Bus 003 Device 005: ID 03f0:d511 HP, Inc HP PageWide Pro 477dw MFP Bus 003 Device 002: ID 148f:5572 Ralink Technology, Corp. RT5572 Wireless Adapter Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 046d:085c Logitech, Inc. C922 Pro Stream Webcam Bus 002 Device 002: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader Controller Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 003: ID 045e:008c Microsoft Corp. Wireless Intellimouse Explorer 2.0 Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. Keyboard LKS02 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub mitch@Meister-Lampe:~$
mitch@Meister-Lampe:~$ id uid=1000(mitch) gid=1000(mitch) Gruppen=1000(mitch),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),120(lpadmin),131(lxd),132(sambashare)
Anschließend die Abfragen bezüglich der Druckerprobleme:
mitch@Meister-Lampe:~$ sudo dpkg -l *cups* lpr* | grep ii ii bluez-cups 5.64-0ubuntu1 amd64 Bluetooth printer driver for CUPS ii cups 2.4.1op1-1ubuntu4.4 amd64 Common UNIX Printing System(tm) - PPD/driver support, web interface ii cups-browsed 1.28.15-0ubuntu1.2 amd64 OpenPrinting CUPS Filters - cups-browsed ii cups-bsd 2.4.1op1-1ubuntu4.4 amd64 Common UNIX Printing System(tm) - BSD commands ii cups-client 2.4.1op1-1ubuntu4.4 amd64 Common UNIX Printing System(tm) - client programs (SysV) ii cups-common 2.4.1op1-1ubuntu4.4 all Common UNIX Printing System(tm) - common files ii cups-core-drivers 2.4.1op1-1ubuntu4.4 amd64 Common UNIX Printing System(tm) - driverless printing ii cups-daemon 2.4.1op1-1ubuntu4.4 amd64 Common UNIX Printing System(tm) - daemon ii cups-filters 1.28.15-0ubuntu1.2 amd64 OpenPrinting CUPS Filters - Main Package ii cups-filters-core-drivers 1.28.15-0ubuntu1.2 amd64 OpenPrinting CUPS Filters - Driverless printing ii cups-ipp-utils 2.4.1op1-1ubuntu4.4 amd64 Common UNIX Printing System(tm) - IPP developer/admin utilities ii cups-pk-helper 0.2.6-1ubuntu5 amd64 PolicyKit helper to configure cups with fine-grained privileges ii cups-ppdc 2.4.1op1-1ubuntu4.4 amd64 Common UNIX Printing System(tm) - PPD manipulation utilities ii cups-server-common 2.4.1op1-1ubuntu4.4 all Common UNIX Printing System(tm) - server common files ii libcups2:amd64 2.4.1op1-1ubuntu4.4 amd64 Common UNIX Printing System(tm) - Core library ii libcups2:i386 2.4.1op1-1ubuntu4.4 i386 Common UNIX Printing System(tm) - Core library ii libcupsfilters1:amd64 1.28.15-0ubuntu1.2 amd64 OpenPrinting CUPS Filters - Shared library ii libcupsimage2:amd64 2.4.1op1-1ubuntu4.4 amd64 Common UNIX Printing System(tm) - Raster image library ii printer-driver-hpcups 3.21.12+dfsg0-1 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups) ii python3-cups:amd64 2.0.1-5build1 amd64 Python3 bindings for CUPS ii python3-cupshelpers 1.5.16-0ubuntu3 all Python utility modules around the CUPS printing system
mitch@Meister-Lampe:~$ sudo dpkg -l libusb* | grep ii ii libusb-0.1-4:amd64 2:0.1.12-32build3 amd64 userspace USB programming library ii libusb-1.0-0:amd64 2:1.0.25-1ubuntu2 amd64 userspace USB programming library ii libusb-1.0-0:i386 2:1.0.25-1ubuntu2 i386 userspace USB programming library ii libusb-dev 2:0.1.12-32build3 amd64 userspace USB programming library development files ii libusbmuxd6:amd64 2.0.2-3build2 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library mitch@Meister-Lampe:~$
mitch@Meister-Lampe:~$ sudo dpkg -l | egrep Brother ii printer-driver-brlaser 6-3 amd64 printer driver for (some) Brother laser printers ii printer-driver-ptouch 1.6-2build1 amd64 printer driver Brother P-touch label printers
mitch@Meister-Lampe:~$ sudo dpkg -l | egrep hp ii hplip 3.21.12+dfsg0-1 amd64 HP Linux Printing and Imaging System (HPLIP) ii hplip-data 3.21.12+dfsg0-1 all HP Linux Printing and Imaging - data files ii hplip-gui 3.21.12+dfsg0-1 all HP Linux Printing and Imaging - GUI utilities (Qt-based) ii libhpmud0:amd64 3.21.12+dfsg0-1 amd64 HP Multi-Point Transport Driver (hpmud) run-time libraries ii libsane-hpaio:amd64 3.21.12+dfsg0-1 amd64 HP SANE backend for multi-function peripherals ii printer-driver-hpcups 3.21.12+dfsg0-1 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups) ii printer-driver-postscript-hp 3.21.12+dfsg0-1 amd64 HP Printers PostScript Descriptions ii python3-launchpadlib 1.10.16-1 all Launchpad web services client library (Python 3)
mitch@Meister-Lampe:~$ sudo dpkg -l | egrep 'iscan*|esci-*|epson'
mitch@Meister-Lampe:~$ sudo dpkg -l | egrep 'scangear*|cnij*'
ch@Meister-Lampe:~$ systemctl --no-pager status cups*
● cups.service - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2023-07-18 12:45:56 CEST; 39min ago
TriggeredBy: ● cups.socket
● cups.path
Docs: man:cupsd(8)
Main PID: 5508 (cupsd)
Status: "Scheduler is running..."
Tasks: 6 (limit: 19050)
Memory: 9.5M
CPU: 7.416s
CGroup: /system.slice/cups.service
├─5508 /usr/sbin/cupsd -l
├─5512 /usr/lib/cups/notifier/dbus dbus:// ""
├─5516 /usr/lib/cups/notifier/dbus dbus:// ""
├─5517 /usr/lib/cups/notifier/dbus dbus:// ""
└─5519 /usr/lib/cups/notifier/dbus dbus:// ""
Jul 18 12:45:56 Meister-Lampe systemd[1]: Starting CUPS Scheduler...
Jul 18 12:45:56 Meister-Lampe systemd[1]: Started CUPS Scheduler.
● cups.socket - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.socket; enabled; vendor preset: enabled)
Active: active (running) since Tue 2023-07-18 12:45:56 CEST; 39min ago
Triggers: ● cups.service
Listen: /run/cups/cups.sock (Stream)
CGroup: /system.slice/cups.socket
Jul 18 12:45:56 Meister-Lampe systemd[1]: Listening on CUPS Scheduler.
● cups.path - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.path; enabled; vendor preset: enabled)
Active: active (running) since Tue 2023-07-18 12:45:56 CEST; 39min ago
Triggers: ● cups.service
Jul 18 12:45:56 Meister-Lampe systemd[1]: Started CUPS Scheduler.
● cups-browsed.service - Make remote CUPS printers available locally
Loaded: loaded (/lib/systemd/system/cups-browsed.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2023-07-18 12:45:56 CEST; 39min ago
Main PID: 5513 (cups-browsed)
Tasks: 3 (limit: 19050)
Memory: 4.7M
CPU: 1.410s
CGroup: /system.slice/cups-browsed.service
└─5513 /usr/sbin/cups-browsed
Jul 18 12:45:56 Meister-Lampe systemd[1]: Started Make remote CUPS printers…lly.
Hint: Some lines were ellipsized, use -l to show in full.mitch@Meister-Lampe:~$ lpstat -t Zeitplandienst läuft keine systemvoreingestellten Ziele Gerät für HP-PageWide-Pro-477dw-MFP: hp:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY Gerät für HP_PageWide_Pro_477dw_MFP_5BCEFE: implicitclass://HP_PageWide_Pro_477dw_MFP_5BCEFE/ Gerät für HP_PageWide_Pro_477dw_MFP_5BCEFE_USB: implicitclass://HP_PageWide_Pro_477dw_MFP_5BCEFE_USB/ HP-PageWide-Pro-477dw-MFP akzeptiert Anfragen seit Di 18 Jul 2023 12:50:44 CEST HP_PageWide_Pro_477dw_MFP_5BCEFE akzeptiert Anfragen seit Di 18 Jul 2023 12:50:36 CEST HP_PageWide_Pro_477dw_MFP_5BCEFE_USB akzeptiert Anfragen seit Di 18 Jul 2023 12:50:43 CEST Drucker HP-PageWide-Pro-477dw-MFP ist im Leerlauf. Aktiviert seit Di 18 Jul 2023 12:50:44 CEST Drucker HP_PageWide_Pro_477dw_MFP_5BCEFE ist im Leerlauf. Aktiviert seit Di 18 Jul 2023 12:50:36 CEST Drucker HP_PageWide_Pro_477dw_MFP_5BCEFE_USB ist im Leerlauf. Aktiviert seit Di 18 Jul 2023 12:50:43 CEST
mitch@Meister-Lampe:~$ lpinfo -v file cups-brf:/ network beh network ipp network socket direct usb://HP/PageWide%20Pro%20477dw%20MFP?serial=CN87KHX0TY&interface=1 network http direct hp:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY network ipps network lpd network https direct hpfax:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY network dnssd://HP%20PageWide%20Pro%20477dw%20MFP%20%5B5BCEFE%5D._ipp._tcp.local/?uuid=bcb5f326-4487-7754-b71b-1cfe032cfe7d network socket://192.168.178.29:9100 network ipp://HP%20PageWide%20Pro%20477dw%20MFP%20%5B5BCEFE%5D%20(USB)._ipp._tcp.local/ network ipps://HP%20PageWide%20Pro%20477dw%20MFP%20%5B5BCEFE%5D._ipps._tcp.local/
mitch@Meister-Lampe:~$ hp-info -i
HP Linux Imaging and Printing System (ver. 3.21.12)
Device Information Utility ver. 5.2
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
hp:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY
error: Channel write error
error: Channel write error
error: Channel write error
Device Parameters (dynamic data):
Parameter Value(s)
---------------------------- ----------------------------------------------------------
back-end hp
cups-printers ['HP-PageWide-Pro-477dw-MFP']
cups-uri hp:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY
dev-file
device-state 1
device-uri hp:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY
deviceid MFG:HP;MDL:HP PageWide Pro 477dw
MFP;CMD:PCL5c,PCLXL,POSTSCRIPT,NATIVEOFFICE,PDF,PCL3GUI,PC
L3,PJL,Automatic,JPEG,PCLM,AppleRaster,PWGRaster,802.11,80
2.3,DESKJET,DYN;CLS:PRINTER;DES:D3Q20B;CID:HPIJPDLV1;LEDMD
IS:USB#FF#CC#00,USB#FF#04#01;MCT:MF;MCL:DI;MCV:3.1;SN:CN87
KHX0TY;S:038080C484100001005800000004600000045000000440000
0041000000;Z:05000009000005000005000005000005,12000,170000
00000000000000000000000000,181;
error-state 101
fax-uri hpfax:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY
host
is-hp True
panel 0
panel-line1
panel-line2
port 1
r 0
rg 000
rr 000000
rs 000000000
scan-uri hpaio:/usb/HP_PageWide_Pro_477dw_MFP?serial=CN87KHX0TY
serial CN87KHX0TY
status-code 5002
status-desc Device is busy, powered down, or unplugged
Model Parameters (static data):
Parameter Value(s)
---------------------------- ----------------------------------------------------------
align-type 0
clean-type 0
color-cal-type 0
copy-type 0
embedded-server-type 1
family-class ['Undefined']
family-ppd hp-postscript-inkjet.ppd
fax-type 6
fw-download False
icon hp_color_laserjet_cp2025.png
io-mfp-mode 1
io-mode 1
io-support 14
job-storage 0
linefeed-cal-type 0
model HP_PageWide_Pro_477dw_MFP
model-ui HP Pagewide Pro 477dw MFP
model1 HP PageWide Pro 477dw Multifunction Printer
monitor-type 0
panel-check-type 0
pcard-type 0
plugin 0
plugin-reason 0
power-settings 0
ppd-name pagewide_pro_477_mfp-ps.ppd
pq-diag-type 0
r-type 0
scan-src 3
scan-type 7
status-battery-check 0
status-dynamic-counters 0
status-type 10
support-released True
support-subtype 18627
support-type 2
support-ver 3.16.3
tech-class ['Postscript']
tech-subclass ['Normal']
tech-type 4
usb-pid 54545
usb-vid 1008
wifi-config 3
Status History (most recent first):
Date/Time Code Status Description User Job ID
-------------------- ----- ---------------------------------------- -------- --------
07/18/23 13:27:24 5002 Device is busy, powered down, or mitch 0
unplugged
Done.mitch@Meister-Lampe:~$ uname -rm 5.19.0-46-generic x86_64
mitch@Meister-Lampe:~$ lsusb Bus 003 Device 005: ID 03f0:d511 HP, Inc HP PageWide Pro 477dw MFP Bus 003 Device 002: ID 148f:5572 Ralink Technology, Corp. RT5572 Wireless Adapter Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 046d:085c Logitech, Inc. C922 Pro Stream Webcam Bus 002 Device 002: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader Controller Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 003: ID 045e:008c Microsoft Corp. Wireless Intellimouse Explorer 2.0 Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. Keyboard LKS02 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
mitch@Meister-Lampe:~$ id uid=1000(mitch) gid=1000(mitch) Gruppen=1000(mitch),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),120(lpadmin),131(lxd),132(sambashare)
mitch@Meister-Lampe:~$ ls -l /etc/cups/ppd/* -rw-r----- 1 root lp 16119 Jul 18 12:50 /etc/cups/ppd/HP_PageWide_Pro_477dw_MFP_5BCEFE.ppd -rw-r----- 1 root lp 16108 Jul 18 12:50 /etc/cups/ppd/HP_PageWide_Pro_477dw_MFP_5BCEFE_USB.ppd -rw-r----- 1 root lp 180959 Jul 18 12:50 /etc/cups/ppd/HP-PageWide-Pro-477dw-MFP.ppd
Ich weiß, dass einige Angaben doppelt sind, aber der Übersichtlichkeit halber habe ich alle Angaben wie gefordert in der Reihenfolge angegegeben. Das war hoffentlich kein Fehler?
Bearbeitet von schwarzheit:
Versionsangabe angepasst.
