Ich habe immer noch Probleme bei der Verbindung wenn ich aus dem Standby modus einschalte. Meinstens bleibt mir nichts anderes übrig, wie einen Neustart durchzuführen. Gibt es dafür eine dauerhafte Lösung?
HP250G7 FREE DOS kein Wlan - Erstinstallation
(Themenstarter)
Anmeldungsdatum: Beiträge: Zähle... |
|
Supporter, Wikiteam
Anmeldungsdatum: Beiträge: 8554 Wohnort: Münster |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 23 |
Hallo. So sieht es aus:santiago@santiago:~$ dkms status rtl8821ce, 5.5.2.1, 5.3.0-45-generic, x86_64: installed rtl8821ce, 5.5.2.1, 5.3.0-46-generic, x86_64: installed rtl8821ce, v5.5.2_34066.20190614, 5.3.0-40-generic, x86_64: built rtl8821ce, v5.5.2_34066.20190614, 5.3.0-42-generic, x86_64: built rtl8821ce, v5.5.2_34066.20190614, 5.3.0-45-generic, x86_64: built rtl8821ce, v5.5.2_34066.20190614, 5.3.0-46-generic, x86_64: built santiago@santiago:~$ lsmod | grep -e 80211 -e rtl btrtl 20480 1 btusb bluetooth 573440 43 btrtl,btintel,btbcm,bnep,btusb,rfcomm cfg80211 704512 1 8821ce santiago@santiago:~$ modinfo rtl8821ce filename: /lib/modules/5.3.0-46-generic/updates/rtl8821ce.ko version: v5.5.2.1_35598.20191029 author: Realtek Semiconductor Corp. description: Realtek Wireless Lan Driver license: GPL srcversion: C09B428D25739BC6860F9B7 alias: pci:v000010ECd0000C82Bsv*sd*bc*sc*i* alias: pci:v000010ECd0000C82Asv*sd*bc*sc*i* alias: pci:v000010ECd0000C821sv*sd*bc*sc*i* depends: cfg80211 retpoline: Y name: rtl8821ce vermagic: 5.3.0-46-generic SMP mod_unload signat: PKCS#7 signer: sig_key: sig_hashalgo: md4 parm: rtw_wireless_mode:int parm: rtw_ips_mode:The default IPS mode (int) parm: rtw_lps_level:The default LPS level (int) parm: rtw_lps_chk_by_tp:int parm: rtw_max_bss_cnt:int parm: rtw_usb_rxagg_mode:int parm: rtw_dynamic_agg_enable:int parm: rtw_tx_bw_mode:The max tx bw for 2.4G and 5G. format is the same as rtw_bw_mode (uint) parm: rtw_rx_ampdu_sz_limit_1ss:RX AMPDU size limit for 1SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_rx_ampdu_sz_limit_2ss:RX AMPDU size limit for 2SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_rx_ampdu_sz_limit_3ss:RX AMPDU size limit for 3SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_rx_ampdu_sz_limit_4ss:RX AMPDU size limit for 4SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_vht_enable:int parm: rtw_vht_rx_mcs_map:VHT RX MCS map (uint) parm: rtw_rf_config:int parm: rtw_country_code:The default country code (in alpha2) (charp) parm: rtw_channel_plan:The default chplan ID when rtw_alpha2 is not specified or valid (int) parm: rtw_excl_chs:exclusive channel array (array of uint) parm: rtw_btcoex_enable:BT co-existence on/off, 0:off, 1:on, 2:by efuse (int) parm: rtw_ant_num:Antenna number setting, 0:by efuse (int) parm: rtw_qos_opt_enable:int parm: ifname:The default name to allocate for first interface (charp) parm: if2name:The default name to allocate for second interface (charp) parm: rtw_pwrtrim_enable:int parm: rtw_initmac:charp parm: rtw_special_rf_path:int parm: rtw_chip_version:int parm: rtw_rfintfs:int parm: rtw_lbkmode:int parm: rtw_network_mode:int parm: rtw_channel:int parm: rtw_mp_mode:int parm: rtw_wmm_enable:int parm: rtw_uapsd_max_sp:int parm: rtw_uapsd_ac_enable:int parm: rtw_wmm_smart_ps:int parm: rtw_vrtl_carrier_sense:int parm: rtw_vcs_type:int parm: rtw_busy_thresh:int parm: rtw_ht_enable:int parm: rtw_bw_mode:int parm: rtw_ampdu_enable:int parm: rtw_rx_stbc:int parm: rtw_rx_ampdu_amsdu:int parm: rtw_tx_ampdu_amsdu:int parm: rtw_lowrate_two_xmit:int parm: rtw_power_mgnt:int parm: rtw_smart_ps:int parm: rtw_low_power:int parm: rtw_wifi_spec:int parm: rtw_full_ch_in_p2p_handshake:int parm: rtw_antdiv_cfg:int parm: rtw_antdiv_type:int parm: rtw_drv_ant_band_switch:int parm: rtw_single_ant_path:int parm: rtw_switch_usb_mode:int parm: rtw_enusbss:int parm: rtw_hwpdn_mode:int parm: rtw_hwpwrp_detect:int parm: rtw_hw_wps_pbc:int parm: rtw_check_hw_status:int parm: rtw_pci_aspm_enable:int parm: rtw_max_roaming_times:The max roaming times to try (uint) parm: rtw_mc2u_disable:int parm: rtw_notch_filter:0:Disable, 1:Enable, 2:Enable only for P2P (uint) parm: rtw_hiq_filter:0:allow all, 1:allow special, 2:deny all (uint) parm: rtw_adaptivity_en:0:disable, 1:enable (uint) parm: rtw_adaptivity_mode:0:normal, 1:carrier sense (uint) parm: rtw_adaptivity_th_l2h_ini:th_l2h_ini for Adaptivity (int) parm: rtw_adaptivity_th_edcca_hl_diff:th_edcca_hl_diff for Adaptivity (int) parm: rtw_amplifier_type_2g:BIT3:2G ext-PA, BIT4:2G ext-LNA (uint) parm: rtw_amplifier_type_5g:BIT6:5G ext-PA, BIT7:5G ext-LNA (uint) parm: rtw_RFE_type:default init value:64 (uint) parm: rtw_powertracking_type:default init value:64 (uint) parm: rtw_GLNA_type:default init value:0 (uint) parm: rtw_TxBBSwing_2G:default init value:0xFF (uint) parm: rtw_TxBBSwing_5G:default init value:0xFF (uint) parm: rtw_OffEfuseMask:default open Efuse Mask value:0 (uint) parm: rtw_FileMaskEfuse:default drv Mask Efuse value:0 (uint) parm: rtw_rxgain_offset_2g:default RF Gain 2G Offset value:0 (uint) parm: rtw_rxgain_offset_5gl:default RF Gain 5GL Offset value:0 (uint) parm: rtw_rxgain_offset_5gh:uint parm: rtw_rxgain_offset_5gm:default RF Gain 5GM Offset value:0 (uint) parm: rtw_pll_ref_clk_sel:force pll_ref_clk_sel, 0xF:use autoload value (uint) parm: rtw_tx_pwr_by_rate:0:Disable, 1:Enable, 2: Depend on efuse (int) parm: rtw_tx_pwr_lmt_enable:0:Disable, 1:Enable, 2: Depend on efuse (int) parm: rtw_target_tx_pwr_2g_a:2.4G target tx power (unit:dBm) of RF path A for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_2g_b:2.4G target tx power (unit:dBm) of RF path B for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_2g_c:2.4G target tx power (unit:dBm) of RF path C for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_2g_d:2.4G target tx power (unit:dBm) of RF path D for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_a:5G target tx power (unit:dBm) of RF path A for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_b:5G target tx power (unit:dBm) of RF path B for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_c:5G target tx power (unit:dBm) of RF path C for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_d:5G target tx power (unit:dBm) of RF path D for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_tsf_update_pause_factor:num of bcn intervals to stay TSF update pause status (int) parm: rtw_tsf_update_restore_factor:num of bcn intervals to stay TSF update restore status (int) parm: rtw_phy_file_path:The path of phy parameter (charp) parm: rtw_load_phy_file:PHY File Bit Map (int) parm: rtw_decrypt_phy_file:Enable Decrypt PHY File (int) parm: rtw_en_napi:int parm: rtw_en_gro:int parm: rtw_iqk_fw_offload:int parm: rtw_ch_switch_offload:int |
(Themenstarter)
Anmeldungsdatum: Beiträge: 23 |
santiago@santiago:~$ dkms status rtl8821ce, 5.5.2.1, 5.3.0-45-generic, x86_64: installed rtl8821ce, 5.5.2.1, 5.3.0-46-generic, x86_64: installed rtl8821ce, v5.5.2_34066.20190614, 5.3.0-40-generic, x86_64: built rtl8821ce, v5.5.2_34066.20190614, 5.3.0-42-generic, x86_64: built rtl8821ce, v5.5.2_34066.20190614, 5.3.0-45-generic, x86_64: built rtl8821ce, v5.5.2_34066.20190614, 5.3.0-46-generic, x86_64: built santiago@santiago:~$ lsmod | grep -e 80211 -e rtl btrtl 20480 1 btusb bluetooth 573440 43 btrtl,btintel,btbcm,bnep,btusb,rfcomm cfg80211 704512 1 8821ce santiago@santiago:~$ modinfo rtl8821ce filename: /lib/modules/5.3.0-46-generic/updates/rtl8821ce.ko version: v5.5.2.1_35598.20191029 author: Realtek Semiconductor Corp. description: Realtek Wireless Lan Driver license: GPL srcversion: C09B428D25739BC6860F9B7 alias: pci:v000010ECd0000C82Bsv*sd*bc*sc*i* alias: pci:v000010ECd0000C82Asv*sd*bc*sc*i* alias: pci:v000010ECd0000C821sv*sd*bc*sc*i* depends: cfg80211 retpoline: Y name: rtl8821ce vermagic: 5.3.0-46-generic SMP mod_unload signat: PKCS#7 signer: sig_key: sig_hashalgo: md4 parm: rtw_wireless_mode:int parm: rtw_ips_mode:The default IPS mode (int) parm: rtw_lps_level:The default LPS level (int) parm: rtw_lps_chk_by_tp:int parm: rtw_max_bss_cnt:int parm: rtw_usb_rxagg_mode:int parm: rtw_dynamic_agg_enable:int parm: rtw_tx_bw_mode:The max tx bw for 2.4G and 5G. format is the same as rtw_bw_mode (uint) parm: rtw_rx_ampdu_sz_limit_1ss:RX AMPDU size limit for 1SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_rx_ampdu_sz_limit_2ss:RX AMPDU size limit for 2SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_rx_ampdu_sz_limit_3ss:RX AMPDU size limit for 3SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_rx_ampdu_sz_limit_4ss:RX AMPDU size limit for 4SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_vht_enable:int parm: rtw_vht_rx_mcs_map:VHT RX MCS map (uint) parm: rtw_rf_config:int parm: rtw_country_code:The default country code (in alpha2) (charp) parm: rtw_channel_plan:The default chplan ID when rtw_alpha2 is not specified or valid (int) parm: rtw_excl_chs:exclusive channel array (array of uint) parm: rtw_btcoex_enable:BT co-existence on/off, 0:off, 1:on, 2:by efuse (int) parm: rtw_ant_num:Antenna number setting, 0:by efuse (int) parm: rtw_qos_opt_enable:int parm: ifname:The default name to allocate for first interface (charp) parm: if2name:The default name to allocate for second interface (charp) parm: rtw_pwrtrim_enable:int parm: rtw_initmac:charp parm: rtw_special_rf_path:int parm: rtw_chip_version:int parm: rtw_rfintfs:int parm: rtw_lbkmode:int parm: rtw_network_mode:int parm: rtw_channel:int parm: rtw_mp_mode:int parm: rtw_wmm_enable:int parm: rtw_uapsd_max_sp:int parm: rtw_uapsd_ac_enable:int parm: rtw_wmm_smart_ps:int parm: rtw_vrtl_carrier_sense:int parm: rtw_vcs_type:int parm: rtw_busy_thresh:int parm: rtw_ht_enable:int parm: rtw_bw_mode:int parm: rtw_ampdu_enable:int parm: rtw_rx_stbc:int parm: rtw_rx_ampdu_amsdu:int parm: rtw_tx_ampdu_amsdu:int parm: rtw_lowrate_two_xmit:int parm: rtw_power_mgnt:int parm: rtw_smart_ps:int parm: rtw_low_power:int parm: rtw_wifi_spec:int parm: rtw_full_ch_in_p2p_handshake:int parm: rtw_antdiv_cfg:int parm: rtw_antdiv_type:int parm: rtw_drv_ant_band_switch:int parm: rtw_single_ant_path:int parm: rtw_switch_usb_mode:int parm: rtw_enusbss:int parm: rtw_hwpdn_mode:int parm: rtw_hwpwrp_detect:int parm: rtw_hw_wps_pbc:int parm: rtw_check_hw_status:int parm: rtw_pci_aspm_enable:int parm: rtw_max_roaming_times:The max roaming times to try (uint) parm: rtw_mc2u_disable:int parm: rtw_notch_filter:0:Disable, 1:Enable, 2:Enable only for P2P (uint) parm: rtw_hiq_filter:0:allow all, 1:allow special, 2:deny all (uint) parm: rtw_adaptivity_en:0:disable, 1:enable (uint) parm: rtw_adaptivity_mode:0:normal, 1:carrier sense (uint) parm: rtw_adaptivity_th_l2h_ini:th_l2h_ini for Adaptivity (int) parm: rtw_adaptivity_th_edcca_hl_diff:th_edcca_hl_diff for Adaptivity (int) parm: rtw_amplifier_type_2g:BIT3:2G ext-PA, BIT4:2G ext-LNA (uint) parm: rtw_amplifier_type_5g:BIT6:5G ext-PA, BIT7:5G ext-LNA (uint) parm: rtw_RFE_type:default init value:64 (uint) parm: rtw_powertracking_type:default init value:64 (uint) parm: rtw_GLNA_type:default init value:0 (uint) parm: rtw_TxBBSwing_2G:default init value:0xFF (uint) parm: rtw_TxBBSwing_5G:default init value:0xFF (uint) parm: rtw_OffEfuseMask:default open Efuse Mask value:0 (uint) parm: rtw_FileMaskEfuse:default drv Mask Efuse value:0 (uint) parm: rtw_rxgain_offset_2g:default RF Gain 2G Offset value:0 (uint) parm: rtw_rxgain_offset_5gl:default RF Gain 5GL Offset value:0 (uint) parm: rtw_rxgain_offset_5gh:uint parm: rtw_rxgain_offset_5gm:default RF Gain 5GM Offset value:0 (uint) parm: rtw_pll_ref_clk_sel:force pll_ref_clk_sel, 0xF:use autoload value (uint) parm: rtw_tx_pwr_by_rate:0:Disable, 1:Enable, 2: Depend on efuse (int) parm: rtw_tx_pwr_lmt_enable:0:Disable, 1:Enable, 2: Depend on efuse (int) parm: rtw_target_tx_pwr_2g_a:2.4G target tx power (unit:dBm) of RF path A for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_2g_b:2.4G target tx power (unit:dBm) of RF path B for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_2g_c:2.4G target tx power (unit:dBm) of RF path C for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_2g_d:2.4G target tx power (unit:dBm) of RF path D for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_a:5G target tx power (unit:dBm) of RF path A for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_b:5G target tx power (unit:dBm) of RF path B for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_c:5G target tx power (unit:dBm) of RF path C for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_d:5G target tx power (unit:dBm) of RF path D for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_tsf_update_pause_factor:num of bcn intervals to stay TSF update pause status (int) parm: rtw_tsf_update_restore_factor:num of bcn intervals to stay TSF update restore status (int) parm: rtw_phy_file_path:The path of phy parameter (charp) parm: rtw_load_phy_file:PHY File Bit Map (int) parm: rtw_decrypt_phy_file:Enable Decrypt PHY File (int) parm: rtw_en_napi:int parm: rtw_en_gro:int parm: rtw_iqk_fw_offload:int parm: rtw_ch_switch_offload:int |
Supporter, Wikiteam
Anmeldungsdatum: Beiträge: 8554 Wohnort: Münster |
Der Editor für Forumsbeiträge hat eine Vorschau-Funktion. Bitte benutze diese! Sie hilft, Katastrophen wie in den beiden vorstehenden Posts von Dir zu vermeiden. |
(Themenstarter)
Anmeldungsdatum: Beiträge: 23 |
santiago@santiago:~$ dkms status rtl8821ce, 5.5.2.1, 5.3.0-45-generic, x86_64: installed rtl8821ce, 5.5.2.1, 5.3.0-46-generic, x86_64: installed rtl8821ce, v5.5.2_34066.20190614, 5.3.0-40-generic, x86_64: built rtl8821ce, v5.5.2_34066.20190614, 5.3.0-42-generic, x86_64: built rtl8821ce, v5.5.2_34066.20190614, 5.3.0-45-generic, x86_64: built rtl8821ce, v5.5.2_34066.20190614, 5.3.0-46-generic, x86_64: built santiago@santiago:~$ lsmod | grep -e 80211 -e rtl btrtl 20480 1 btusb bluetooth 573440 43 btrtl,btintel,btbcm,bnep,btusb,rfcomm cfg80211 704512 1 8821ce santiago@santiago:~$ modinfo rtl8821ce filename: /lib/modules/5.3.0-46-generic/updates/rtl8821ce.ko version: v5.5.2.1_35598.20191029 author: Realtek Semiconductor Corp. description: Realtek Wireless Lan Driver license: GPL srcversion: C09B428D25739BC6860F9B7 alias: pci:v000010ECd0000C82Bsv*sd*bc*sc*i* alias: pci:v000010ECd0000C82Asv*sd*bc*sc*i* alias: pci:v000010ECd0000C821sv*sd*bc*sc*i* depends: cfg80211 retpoline: Y name: rtl8821ce vermagic: 5.3.0-46-generic SMP mod_unload signat: PKCS#7 signer: sig_key: sig_hashalgo: md4 parm: rtw_wireless_mode:int parm: rtw_ips_mode:The default IPS mode (int) parm: rtw_lps_level:The default LPS level (int) parm: rtw_lps_chk_by_tp:int parm: rtw_max_bss_cnt:int parm: rtw_usb_rxagg_mode:int parm: rtw_dynamic_agg_enable:int parm: rtw_tx_bw_mode:The max tx bw for 2.4G and 5G. format is the same as rtw_bw_mode (uint) parm: rtw_rx_ampdu_sz_limit_1ss:RX AMPDU size limit for 1SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_rx_ampdu_sz_limit_2ss:RX AMPDU size limit for 2SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_rx_ampdu_sz_limit_3ss:RX AMPDU size limit for 3SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_rx_ampdu_sz_limit_4ss:RX AMPDU size limit for 4SS link of each BW, 0xFF: no limitation (array of uint) parm: rtw_vht_enable:int parm: rtw_vht_rx_mcs_map:VHT RX MCS map (uint) parm: rtw_rf_config:int parm: rtw_country_code:The default country code (in alpha2) (charp) parm: rtw_channel_plan:The default chplan ID when rtw_alpha2 is not specified or valid (int) parm: rtw_excl_chs:exclusive channel array (array of uint) parm: rtw_btcoex_enable:BT co-existence on/off, 0:off, 1:on, 2:by efuse (int) parm: rtw_ant_num:Antenna number setting, 0:by efuse (int) parm: rtw_qos_opt_enable:int parm: ifname:The default name to allocate for first interface (charp) parm: if2name:The default name to allocate for second interface (charp) parm: rtw_pwrtrim_enable:int parm: rtw_initmac:charp parm: rtw_special_rf_path:int parm: rtw_chip_version:int parm: rtw_rfintfs:int parm: rtw_lbkmode:int parm: rtw_network_mode:int parm: rtw_channel:int parm: rtw_mp_mode:int parm: rtw_wmm_enable:int parm: rtw_uapsd_max_sp:int parm: rtw_uapsd_ac_enable:int parm: rtw_wmm_smart_ps:int parm: rtw_vrtl_carrier_sense:int parm: rtw_vcs_type:int parm: rtw_busy_thresh:int parm: rtw_ht_enable:int parm: rtw_bw_mode:int parm: rtw_ampdu_enable:int parm: rtw_rx_stbc:int parm: rtw_rx_ampdu_amsdu:int parm: rtw_tx_ampdu_amsdu:int parm: rtw_lowrate_two_xmit:int parm: rtw_power_mgnt:int parm: rtw_smart_ps:int parm: rtw_low_power:int parm: rtw_wifi_spec:int parm: rtw_full_ch_in_p2p_handshake:int parm: rtw_antdiv_cfg:int parm: rtw_antdiv_type:int parm: rtw_drv_ant_band_switch:int parm: rtw_single_ant_path:int parm: rtw_switch_usb_mode:int parm: rtw_enusbss:int parm: rtw_hwpdn_mode:int parm: rtw_hwpwrp_detect:int parm: rtw_hw_wps_pbc:int parm: rtw_check_hw_status:int parm: rtw_pci_aspm_enable:int parm: rtw_max_roaming_times:The max roaming times to try (uint) parm: rtw_mc2u_disable:int parm: rtw_notch_filter:0:Disable, 1:Enable, 2:Enable only for P2P (uint) parm: rtw_hiq_filter:0:allow all, 1:allow special, 2:deny all (uint) parm: rtw_adaptivity_en:0:disable, 1:enable (uint) parm: rtw_adaptivity_mode:0:normal, 1:carrier sense (uint) parm: rtw_adaptivity_th_l2h_ini:th_l2h_ini for Adaptivity (int) parm: rtw_adaptivity_th_edcca_hl_diff:th_edcca_hl_diff for Adaptivity (int) parm: rtw_amplifier_type_2g:BIT3:2G ext-PA, BIT4:2G ext-LNA (uint) parm: rtw_amplifier_type_5g:BIT6:5G ext-PA, BIT7:5G ext-LNA (uint) parm: rtw_RFE_type:default init value:64 (uint) parm: rtw_powertracking_type:default init value:64 (uint) parm: rtw_GLNA_type:default init value:0 (uint) parm: rtw_TxBBSwing_2G:default init value:0xFF (uint) parm: rtw_TxBBSwing_5G:default init value:0xFF (uint) parm: rtw_OffEfuseMask:default open Efuse Mask value:0 (uint) parm: rtw_FileMaskEfuse:default drv Mask Efuse value:0 (uint) parm: rtw_rxgain_offset_2g:default RF Gain 2G Offset value:0 (uint) parm: rtw_rxgain_offset_5gl:default RF Gain 5GL Offset value:0 (uint) parm: rtw_rxgain_offset_5gh:uint parm: rtw_rxgain_offset_5gm:default RF Gain 5GM Offset value:0 (uint) parm: rtw_pll_ref_clk_sel:force pll_ref_clk_sel, 0xF:use autoload value (uint) parm: rtw_tx_pwr_by_rate:0:Disable, 1:Enable, 2: Depend on efuse (int) parm: rtw_tx_pwr_lmt_enable:0:Disable, 1:Enable, 2: Depend on efuse (int) parm: rtw_target_tx_pwr_2g_a:2.4G target tx power (unit:dBm) of RF path A for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_2g_b:2.4G target tx power (unit:dBm) of RF path B for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_2g_c:2.4G target tx power (unit:dBm) of RF path C for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_2g_d:2.4G target tx power (unit:dBm) of RF path D for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_a:5G target tx power (unit:dBm) of RF path A for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_b:5G target tx power (unit:dBm) of RF path B for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_c:5G target tx power (unit:dBm) of RF path C for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_target_tx_pwr_5g_d:5G target tx power (unit:dBm) of RF path D for each rate section, should match the real calibrate power, -1: undefined (array of int) parm: rtw_tsf_update_pause_factor:num of bcn intervals to stay TSF update pause status (int) parm: rtw_tsf_update_restore_factor:num of bcn intervals to stay TSF update restore status (int) parm: rtw_phy_file_path:The path of phy parameter (charp) parm: rtw_load_phy_file:PHY File Bit Map (int) parm: rtw_decrypt_phy_file:Enable Decrypt PHY File (int) parm: rtw_en_napi:int parm: rtw_en_gro:int parm: rtw_iqk_fw_offload:int parm: rtw_ch_switch_offload:int santiago@santiago:~$
Bearbeitet von sebix: Bitte verwende in Zukunft Codeblöcke, um die Übersicht im Forum zu verbessern! |
(Themenstarter)
Anmeldungsdatum: Beiträge: 23 |
Sorry , irgendwie funktioniert dies nicht beim einfügen sieht alles ok aus. Nach dem Abschicken erscheint das Chaos. |
Anmeldungsdatum: Beiträge: 1749 |
Das Zauberwort heißt Codeblock –> Klick-mich. Gruß, Holger |
Supporter, Wikiteam
Anmeldungsdatum: Beiträge: 8554 Wohnort: Münster |
santiago@santiago:~$ dkms status rtl8821ce, 5.5.2.1, 5.3.0-45-generic, x86_64: installed rtl8821ce, 5.5.2.1, 5.3.0-46-generic, x86_64: installed rtl8821ce, v5.5.2_34066.20190614, 5.3.0-40-generic, x86_64: built rtl8821ce, v5.5.2_34066.20190614, 5.3.0-42-generic, x86_64: built rtl8821ce, v5.5.2_34066.20190614, 5.3.0-45-generic, x86_64: built rtl8821ce, v5.5.2_34066.20190614, 5.3.0-46-generic, x86_64: built Da sind für den aktuellsten installierten Kernel zwei Versionen des Treibers installiert. Das kann nicht gut sein. Bereinige das bitte. Möglicherweise löst das schon das Problem. |