Hallo liebe Experten,
mein internes Mikro geht leider nicht.
lspci | grep -i audio 00:1f.3 Multimedia audio controller: Intel Corporation Alder Lake PCH-P High Definition Audio Controller (rev 01)
Treiberinfo:
hwinfo --sound
18: PCI 1f.3: 0401 Multimedia audio controller
[Created at pci.386]
Unique ID: nS1_.5xL6mF2sAj3
SysFS ID: /devices/pci0000:00/0000:00:1f.3
SysFS BusID: 0000:00:1f.3
Hardware Class: sound
Model: "Intel Multimedia audio controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x51c8
SubVendor: pci 0x1e26 "Fujitsu Client Computing Limited"
SubDevice: pci 0x0040
Revision: 0x01
Driver: "sof-audio-pci-intel-tgl"
Driver Modules: "snd_sof_pci_intel_tgl"
Memory Range: 0x5e430000-0x5e433fff (rw,non-prefetchable)
Memory Range: 0x601e000000-0x601e0fffff (rw,non-prefetchable)
IRQ: 178 (3695 events)
Module Alias: "pci:v00008086d000051C8sv00001E26sd00000040bc04sc01i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Driver Info #1:
Driver Status: snd_sof_pci_intel_tgl is active
Driver Activation Cmd: "modprobe snd_sof_pci_intel_tgl"
Config Status: cfg=new, avail=yes, need=no, active=unknown
33: USB 00.1: 0401 Multimedia audio controller
[Created at usb.122]
Unique ID: ufwI.IjnotL8urt1
Parent ID: Yl4J.DFkaVl_rzX0
SysFS ID: /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1
SysFS BusID: 3-1.2.3:1.1
Hardware Class: sound
Model: "JMTek, LLC USB PnP Audio Device"
Hotplug: USB
Vendor: usb 0x0c76 "JMTek, LLC."
Device: usb 0x161f "USB PnP Audio Device"
Revision: "1.00"
Driver: "snd-usb-audio"
Driver Modules: "snd_usb_audio"
Speed: 12 Mbps
Module Alias: "usb:v0C76p161Fd0100dc00dsc00dp00ic01isc02ip00in01"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #57 (Hub)Weitere Infos:
pulsemixer --list-sources Source: ID: source-1, Name: Monitor of sof-hda-dsp HDMI / DisplayPort 3 Output, Mute: 0, Channels: 2, Volumes: ['100%', '100%'] Source: ID: source-2, Name: Monitor of sof-hda-dsp HDMI / DisplayPort 2 Output, Mute: 0, Channels: 2, Volumes: ['100%', '100%'] Source: ID: source-3, Name: Monitor of sof-hda-dsp HDMI / DisplayPort 1 Output, Mute: 0, Channels: 2, Volumes: ['100%', '100%'] Source: ID: source-4, Name: Monitor of sof-hda-dsp Speaker + Headphones, Mute: 0, Channels: 2, Volumes: ['100%', '100%'] Source: ID: source-5, Name: sof-hda-dsp Headphones Stereo Microphone, Mute: 0, Channels: 2, Volumes: ['32%', '32%'] Source: ID: source-6, Name: sof-hda-dsp Digital Microphone, Mute: 0, Channels: 2, Volumes: ['43%', '43%'] Source: ID: source-7, Name: Monitor of USB PnP Audio Device Analog Stereo, Mute: 0, Channels: 2, Volumes: ['100%', '100%'] Source: ID: source-8, Name: USB PnP Audio Device Mono, Mute: 0, Channels: 1, Volumes: ['53%'] Source: ID: source-10, Name: Monitor of Zone Wireless, Mute: 0, Channels: 1, Volumes: ['100%'] Source: ID: source-11, Name: Zone Wireless, Mute: 0, Channels: 1, Volumes: ['98%'], Default Source output: ID: source-output-24, Name: Google Chrome input, Mute: 0, Channels: 2, Volumes: ['100%', '100%'] Source output: ID: source-output-27, Name: GNOME Settings, Mute: 0, Channels: 1, Volumes: ['100%'] Source output: ID: source-output-28, Name: GNOME Settings, Mute: 0, Channels: 1, Volumes: ['100%']
Was kann ich tun? Danke für Eure Hilfe
