Danke, hier alle infos
uname -a
Linux <hostname> 5.19.0-45-generic #46~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Wed Jun 7 15:06:04 UTC 20 x86_64 x86_64 x86_64 GNU/Linux
lspci -nnk | grep -A3 02[08]0
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] (rev 05)
DeviceName: Realtek RTL8125BG LAN
Subsystem: ASUSTeK Computer Inc. RTL8125 2.5GbE Controller [1043:87d7]
Kernel driver in use: r8169
--
08:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:b852]
Subsystem: AzureWave Device [1a3b:5471]
09:00.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Device [1022:43f7] (rev 01)
Subsystem: ASMedia Technology Inc. Device [1b21:1142]
lsusb -v -t
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/0p, 5000M
ID 1d6b:0003 Linux Foundation 3.0 root hub
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
ID 1d6b:0003 Linux Foundation 3.0 root hub
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
ID 1d6b:0003 Linux Foundation 3.0 root hub
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
ID 0461:4d17 Primax Electronics, Ltd Optical Mouse
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 10000M
ID 1d6b:0003 Linux Foundation 3.0 root hub
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 2: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
ID 13d3:3571 IMC Networks
|__ Port 2: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
ID 13d3:3571 IMC Networks
|__ Port 7: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 12M
ID 0b05:19af ASUSTek Computer, Inc.
|__ Port 7: Dev 3, If 2, Class=Human Interface Device, Driver=usbhid, 12M
ID 0b05:19af ASUSTek Computer, Inc.
|__ Port 8: Dev 4, If 3, Class=Human Interface Device, Driver=usbhid, 12M
ID 04d9:a293 Holtek Semiconductor, Inc.
|__ Port 8: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M
ID 04d9:a293 Holtek Semiconductor, Inc.
|__ Port 8: Dev 4, If 2, Class=Human Interface Device, Driver=usbhid, 12M
ID 04d9:a293 Holtek Semiconductor, Inc.
|__ Port 8: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
ID 04d9:a293 Holtek Semiconductor, Inc.
Das Netzwerk an sich ist einfach gehalten, das WLAN kommt von der Fritz Box ohne irgendwelche extra APs dazwischen.
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether c8:7f:54:a9:d7:18 brd ff:ff:ff:ff:ff:ff
altname enp7s0
rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
iwconfig
lo no wireless extensions.
eno1 no wireless extensions.
Das sollten alle eventuell relevanten Infos sein, falls noch irgendwas gebraucht wird bringe ich das auch gerne in Erfahrung.
Vielen dank schon einmal im Vorraus!