Mafino
Anmeldungsdatum: 6. Juni 2006
Beiträge: 100
|
Auf meinem Laptop (Lenovo Thinkpad E570) ist kein das Brennen von (Audio-)CDs nicht mehr möglich. K3b bricht den Brennvorgang mit der Fehlermeldung "cdrecord has no permission to open the device" ab. (Daten-)DVDs werden erfolgreich gebrannt. Mitgliedschaft in der Gruppe cdrom ist gegeben: | cdrom:x:24:meinNutzername
|
Was kann ich tun?
|
Mafino
(Themenstarter)
Anmeldungsdatum: 6. Juni 2006
Beiträge: 100
|
Guter Hinweis... 😳 Insbesondere der dritte Punkt scheint's gebracht zu haben. Vielen Dank!
|
Mafino
(Themenstarter)
Anmeldungsdatum: 6. Juni 2006
Beiträge: 100
|
Ich mach das hier noch mal auf, weil K3b wieder (andere?) Probleme macht - DAO-Brennvorgang wird abgebrochen, die Konfiguration ist unverändert geblieben. Fehlermeldung lautet
| cdrecord gab einen unbekannten Fehlercode zurück (Fehlercode 255).
Manchmal hilft es, den TAO-Modus zu verwenden.
|
Letzteres habe ich probiert, der Brennvorgang wird dann auch gestartet und läuft bis zum Ende durch, die Disk wird jedoch nicht abgeschlossen (macht Audio-CDs unbrauchbar, die älteren werden sich erinnern). Detaillierte Fehlerausgabe lautet wie folgt: 1. DAO-Modus:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123 | Devices
-----------------------
PLDS DVD-RW DA8A6SH GU64 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R doppelschichtig, DVD+R, DVD+RW, DVD+R doppelschichtig) [DVD-ROM, DVD-R sequenziell, Zweischichtige DVD-R sequenziell, Zweischicht-DVD-R-Sprung, DVD-RAM, DVD-RW Eingeschränktes Überbrennen, DVD-RW sequenziell, DVD+RW, DVD+R, Zweischichtige DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Eingeschränktes Überbrennen, Sprung zwischen DVD-Schichten] [%7]
System
-----------------------
K3b Version: 18.12.3
KDE Version: 5.55.0
Qt Version: 5.12.2
Kernel: 5.0.0-27-generic
Used versions
-----------------------
cdrecord: 1.1.11
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Text len: 54
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'PLDS '
Identification : 'DVD-RW DA8A6SH '
Revision : 'GU64'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 335104 = 327 KB
FIFO size : 12582912 = 12288 KB
Speed set to 3529 KB/s
pregap1: -1
Track 01: audio 104 MB (10:21.02) no preemp swab copy
Track 02: audio 119 MB (11:52.93) no preemp swab copy
Track 03: audio 128 MB (12:44.34) no preemp swab copy
Track 04: audio 137 MB (13:37.93) no preemp swab copy
Track 05: audio 101 MB (10:05.36) no preemp swab copy
Track 06: audio 48 MB (04:48.20) no preemp swab copy
Track 07: audio 158 MB (15:44.44) no preemp swab copy
Total size: 799 MB (79:14.24) = 356568 sectors
Lout start: 800 MB (79:16/18) = 356568 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 3278
Forcespeed is OFF.
Starting to write CD/DVD at speed 20.0 in real force SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
SAO startsec: -11634
Writing lead-in...
Lead-in write time: 28.239s
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 104 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 01 7A 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.321s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
Errno: 5 (Input/output error), test unit ready scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.032s timeout 200s
write track data: error after 889056 bytes
Writing time: 34.266s
Average write speed 788.7x.
Fixating...
Fixating time: 1.258s
/usr/bin/wodim: fifo had 205 puts and 15 gets.
/usr/bin/wodim: fifo was 0 times empty and 7 times full, min fill was 97%.
BURN-Free was 1 times used.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=20 -sao driveropts=burnfree -force textfile=/tmp/k3b.ppXBqI -ignsize -useinfo -audio /tmp/k3b_audio_0_01.inf /tmp/k3b_audio_0_02.inf /tmp/k3b_audio_0_03.inf /tmp/k3b_audio_0_04.inf /tmp/k3b_audio_0_05.inf /tmp/k3b_audio_0_06.inf /tmp/k3b_audio_0_07.inf
|
2. TAO-Modus:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111 | Devices
-----------------------
PLDS DVD-RW DA8A6SH GU64 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R doppelschichtig, DVD+R, DVD+RW, DVD+R doppelschichtig) [DVD-ROM, DVD-R sequenziell, Zweischichtige DVD-R sequenziell, Zweischicht-DVD-R-Sprung, DVD-RAM, DVD-RW Eingeschränktes Überbrennen, DVD-RW sequenziell, DVD+RW, DVD+R, Zweischichtige DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Eingeschränktes Überbrennen, Sprung zwischen DVD-Schichten] [%7]
System
-----------------------
K3b Version: 18.12.3
KDE Version: 5.55.0
Qt Version: 5.12.2
Kernel: 5.0.0-27-generic
Used versions
-----------------------
cdrecord: 1.1.11
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'PLDS '
Identification : 'DVD-RW DA8A6SH '
Revision : 'GU64'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 335104 = 327 KB
FIFO size : 12582912 = 12288 KB
Speed set to 3529 KB/s
pregap1: -1
Track 01: audio 104 MB (10:21.02) no preemp swab copy
Track 02: audio 119 MB (11:52.93) no preemp swab copy
Track 03: audio 128 MB (12:44.34) no preemp swab copy
Track 04: audio 137 MB (13:37.93) no preemp swab copy
Track 05: audio 101 MB (10:05.36) no preemp swab copy
Track 06: audio 48 MB (04:48.20) no preemp swab copy
Track 07: audio 158 MB (15:44.44) no preemp swab copy
Total size: 801 MB (79:26.24) = 357468 sectors
Lout start: 802 MB (79:28/18) = 357468 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 2378
Forcespeed is OFF.
Starting to write CD/DVD at speed 20.0 in real force TAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
(Trackdetails zugunsten der Lesbarkeit gelöscht)
Writing time: 324.795s
Average write speed 15.2x.
Min drive buffer fill was 98%
Fixating...
Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 72 01 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x72 Qual 0x01 (session fixation error writing lead-in) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 10.711s timeout 480s
=== last message repeated 2 times. ===
/usr/bin/wodim: Cannot fixate disk.
Fixating time: 11.463s
/usr/bin/wodim: fifo had 13211 puts and 13211 gets.
/usr/bin/wodim: fifo was 0 times empty and 12117 times full, min fill was 97%.
BURN-Free was 1 times used.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=20 -tao driveropts=burnfree -force -ignsize -useinfo -audio /tmp/k3b_audio_1_01.inf /tmp/k3b_audio_1_02.inf /tmp/k3b_audio_1_03.inf /tmp/k3b_audio_1_04.inf /tmp/k3b_audio_1_05.inf /tmp/k3b_audio_1_06.inf /tmp/k3b_audio_1_07.inf
|
Wäre schön, wenn mir auch hier jemand helfen könnte.
|