ubuntuusers.de

Hallo Zusammen,

unter Ubuntu 18.04. wird der integrierte Kartenleser meines MacBook Pro Baujahr 2012 nicht erkannt. Mit dem vorherigen System Linux Mint 18.04 ging das noch. Das Gerät selbst und die SD Karten sind ok, unter macOS werden sie sauber angesprochen.

Kann ich irgendetwas tun bzw. versuchen, um auch unter Ubuntu den Kartenleser zu nutzen?

Beste Grüße

Zeige

lspci

lsusb

Sagt dmesq irgendwas?

Hallo,

lspci

01:00.1 SD Host controller: Broadcom Limited BCM57765/57785 SDXC/MMC Card Reader (rev 10)

lsusb

zeigt den Card Reader nicht an.

dmesq zeigt den CardReader an. Ich hoffe, das hier ist der richtige Ausschnitt? Bin noch nicht so tief in Linux drin.

[   37.765892] mmc0: Tuning timeout, falling back to fixed sampling clock
[   37.765916] mmc0: new ultra high speed SDR104 SDHC card at address 0001
[   37.766450] mmcblk0: mmc0:0001 00000 14.9 GiB 
[   44.768893] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:7a:8a:20:8e:a2:bc:86:dd SRC=fe80:0000:0000:0000:788a:20ff:fe8e:a2bc DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=196 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=43257 DPT=10001 LEN=156 
[   47.695951] mmc0: Timeout waiting for hardware interrupt.
[   47.695957] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[   47.695963] mmc0: sdhci: Sys addr:  0x000010c8 | Version:  0x00001502
[   47.695970] mmc0: sdhci: Blk size:  0x00007200 | Blk cnt:  0x00000000
[   47.695976] mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x0000003b
[   47.695993] mmc0: sdhci: Present:   0x1fff0000 | Host ctl: 0x0000001f
[   47.696000] mmc0: sdhci: Power:     0x0000000f | Blk gap:  0x00000000
[   47.696017] mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[   47.696023] mmc0: sdhci: Timeout:   0x0000000a | Int stat: 0x00000000
[   47.696029] mmc0: sdhci: Int enab:  0x02ff008b | Sig enab: 0x02ff008b
[   47.696034] mmc0: sdhci: AC12 err:  0x00000000 | Slot int: 0x00000000
[   47.696040] mmc0: sdhci: Caps:      0x176ec8b0 | Caps_1:   0x03002177
[   47.696047] mmc0: sdhci: Cmd:       0x0000123a | Max curr: 0x00000000
[   47.696053] mmc0: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x00000900
[   47.696058] mmc0: sdhci: Resp[2]:   0x00000900 | Resp[3]:  0x00000900
[   47.696062] mmc0: sdhci: Host ctl2: 0x0000804b
[   47.696070] mmc0: sdhci: ADMA Err:  0x00000001 | ADMA Ptr: 0x0000000451f6e204
[   47.696071] mmc0: sdhci: ============================================
[   47.696102] mmc0: Unexpected interrupt 0x04000000.
[   47.696105] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[   47.696114] mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00001502
[   47.696123] mmc0: sdhci: Blk size:  0x00007200 | Blk cnt:  0x00000000
[   47.696133] mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000033
[   47.696142] mmc0: sdhci: Present:   0x1fff0001 | Host ctl: 0x0000001f
[   47.696148] mmc0: sdhci: Power:     0x0000000f | Blk gap:  0x00000000
[   47.696154] mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[   47.696161] mmc0: sdhci: Timeout:   0x0000000a | Int stat: 0x00000000
[   47.696168] mmc0: sdhci: Int enab:  0x02ff008b | Sig enab: 0x02ff008b
[   47.696174] mmc0: sdhci: AC12 err:  0x00000000 | Slot int: 0x00000000
[   47.696180] mmc0: sdhci: Caps:      0x176ec8b0 | Caps_1:   0x03002177
[   47.696186] mmc0: sdhci: Cmd:       0x00000c1a | Max curr: 0x00000000
[   47.696193] mmc0: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x00000900
[   47.696209] mmc0: sdhci: Resp[2]:   0x00000900 | Resp[3]:  0x00000900
[   47.696213] mmc0: sdhci: Host ctl2: 0x0000800b
[   47.696222] mmc0: sdhci: ADMA Err:  0x00000001 | ADMA Ptr: 0x0000000451f6e204
[   47.696227] mmc0: sdhci: ============================================
[   47.696299] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x400900
[   48.002069] mmcblk0: error -110 transferring data, sector 31222824, nr 8, cmd response 0x900, card status 0xb00
[   48.532914] mmc0: Tuning timeout, falling back to fixed sampling clock
[   50.410184] [UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:c8:0e:14:8c:b1:89:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[   52.353015] mmc0: Card removed during transfer!
[   52.353023] mmc0: Resetting controller.
[   52.353155] mmcblk0: error -123 sending status command, retrying
[   52.405746] mmc0: Tuning timeout, falling back to fixed sampling clock
[   52.405836] mmcblk0: error -123 sending status command, retrying
[   52.405917] mmcblk0: error -123 sending status command, aborting
[   52.553492] mmc0: card 0001 removed
[   53.730940] mmc0: Tuning timeout, falling back to fixed sampling clock
[   53.730963] mmc0: new ultra high speed SDR104 SDHC card at address 0001
[   53.731449] mmcblk0: mmc0:0001 00000 14.9 GiB 
[   54.773513] [UFW BLOCK] IN=wlp2s0 OUT= MAC=33:33:00:00:00:01:7a:8a:20:8e:a2:bc:86:dd SRC=fe80:0000:0000:0000:788a:20ff:fe8e:a2bc DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=196 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=58127 DPT=10001 LEN=156 
[   56.189835] mmc0: Card removed during transfer!
[   56.189843] mmc0: Resetting controller.
[   56.189962] mmcblk0: error -123 sending status command, retrying
[   56.243114] mmc0: Tuning timeout, falling back to fixed sampling clock
[   56.243158] mmcblk0: error -123 sending status command, retrying
[   56.243181] mmcblk0: error -123 sending status command, aborting
[   56.243507] ldm_validate_partition_table(): Disk read failed.
[   56.243905] Dev mmcblk0: unable to read RDB block 0
[   56.244042]  mmcblk0: unable to read partition table
[   56.390869] mmc0: card 0001 removed
[   62.177664] mmc0: Tuning timeout, falling back to fixed sampling clock
[   62.177687] mmc0: new ultra high speed SDR104 SDXC card at address 59b4
[   62.178149] mmcblk0: mmc0:59b4 SD128 120 GiB 

Beste Grüße