ubuntuusers.de

64 GB Karte mit Musik befüllen

Status: Gelöst | Ubuntu-Version: Ubuntu 16.04 (Xenial Xerus)
Antworten |

helsup

Anmeldungsdatum:
1. Mai 2014

Beiträge: 96

Hallo Zusammen, die Karte wird unter "Laufwerke" angezeigt als Generic STORAGE DEVICE (0903),64 GB (63.864.569.856 Bytes) Ich möchte die Karte mit exFAT neu formatieren. Sodann möchte ich die Karte befüllen.

Ich habe die Karte in einem USB- Adapter angeschlossen, aber sie erscheint nicht wie üblich als USB- Stick. Auch in einem flachem Adapter erscheint sie nicht. Kann mir bitte jemand helfen?

Moderiert von sebix:

Thema in einen passenden Forenbereich verschoben. Partitionierung/Laufwerksverwaltung hat keine Bezug zu Multimedia. Bitte beachte die als wichtig markierten Themen („Welche Themen gehören hier her und welche nicht?“) in jedem Forenbereich. Danke.

Thomas_Do Team-Icon

Moderator
Avatar von Thomas_Do

Anmeldungsdatum:
24. November 2009

Beiträge: 8808

Wenn die Karte erkannt wird ist doch gut. Du kannst sie dann z.B. mit gparted neu formatieren.

helsup

(Themenstarter)

Anmeldungsdatum:
1. Mai 2014

Beiträge: 96

erkannt- jaein. Sie bootet nicht, d.h. sie erscheint nicht links im Panell. Anfangs tauchte ein Fenster auf mit Frage "bootbar"- habe ich angeklickt. Dann existiert sie im "verborgenem"

tomtomtom Team-Icon

Supporter
Avatar von tomtomtom

Anmeldungsdatum:
22. August 2008

Beiträge: 55432

Wohnort: Berlin

Zeige bitte die Terminal-Ausgaben von

sudo parted --list

dmesg

und

dpkg -l | grep exfat

hier jeweils im Codeblock.

Ohne Infos wird das sonst Stochern im Dunklen.

helsup

(Themenstarter)

Anmeldungsdatum:
1. Mai 2014

Beiträge: 96

Modell: ATA WDC WD5000AZRX-0 (scsi)
Festplatte  /dev/sda:  500GB
Sektorgröße (logisch/physisch): 512B/4096B
Partitionstabelle: msdos
Disk-Flags: 

Nummer  Anfang  Ende   Größe   Typ       Dateisystem     Flags
 1      1049kB  497GB  497GB   primary   ext4            boot
 2      497GB   500GB  3422MB  extended
 5      497GB   500GB  3422MB  logical   linux-swap(v1)


Modell: Generic STORAGE DEVICE (scsi)
Festplatte  /dev/sdb:  63,9GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: msdos
Disk-Flags: 

Nummer  Anfang  Ende    Größe   Typ      Dateisystem  Flags
 1      1049kB  63,9GB  63,9GB  primary
helmuth@helmuth-MS-7721:~$ sudo parted --list
[sudo] Passwort für helmuth: 
Modell: ATA WDC WD5000AZRX-0 (scsi)
Festplatte  /dev/sda:  500GB
Sektorgröße (logisch/physisch): 512B/4096B
Partitionstabelle: msdos
Disk-Flags: 

Nummer  Anfang  Ende   Größe   Typ       Dateisystem     Flags
 1      1049kB  497GB  497GB   primary   ext4            boot
 2      497GB   500GB  3422MB  extended
 5      497GB   500GB  3422MB  logical   linux-swap(v1)


Modell: Generic STORAGE DEVICE (scsi)
Festplatte  /dev/sdb:  63,9GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: msdos
Disk-Flags: 

Nummer  Anfang  Ende    Größe   Typ      Dateisystem  Flags
 1      1049kB  63,9GB  63,9GB  primary


helmuth@helmuth-MS-7721:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-34-generic (buildd@lgw01-20) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #53-Ubuntu SMP Wed Jul 27 16:06:39 UTC 2016 (Ubuntu 4.4.0-34.53-generic 4.4.15)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic root=UUID=d4e1384b-6e94-4516-b014-d8185dbed805 ro recovery nomodeset
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 008f000000
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008ca88fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ca89000-0x000000008cab8fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008cab9000-0x000000008cd73fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008cd74000-0x000000008ce30fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008ce31000-0x000000008e235fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008e236000-0x000000008e236fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008e237000-0x000000008e43cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008e43d000-0x000000008e881fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008e882000-0x000000008eff2fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008eff3000-0x000000008effffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: MSI MS-7721/A78M-E45 (MS-7721), BIOS V25.5 10/20/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFF8000000 write-back
[    0.000000]   2 base 000088000000 mask FFFFFC000000 write-back
[    0.000000]   3 base 00008C000000 mask FFFFFE000000 write-back
[    0.000000]   4 base 00008E000000 mask FFFFFF000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000013f000000 aka 5104M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0x8f000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x8f000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd920-0x000fd92f] mapped at [ffff8800000fd920]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33880000-0x35c37fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000008CDF8080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000008CDFEA78 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[    0.000000] ACPI: DSDT 0x000000008CDF81A0 0068D2 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000008CE27D80 000040
[    0.000000] ACPI: APIC 0x000000008CDFEB88 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000008CDFEC00 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000008CDFEC48 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000008CDFECE8 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: UEFI 0x000000008CDFED28 000042 (v01 ALASKA A M I    01072009      00000000)
[    0.000000] ACPI: IVRS 0x000000008CDFED70 000068 (v02 AMD    BANTRY   00000001 AMD  00000000)
[    0.000000] ACPI: SSDT 0x000000008CDFEDD8 0009F8 (v01 AMD    BANTRY   00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x000000008CDFF7D0 0004B7 (v02 AMD    BANTRY   00000001 MSFT 04000000)
[    0.000000] ACPI: CRAT 0x000000008CDFFC88 000500 (v01 AMD    BANTRY   00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x000000008CE00188 00122C (v01 AMD    CPMCMN   00000001 INTL 20051117)
[    0.000000] ACPI: SSDT 0x000000008CE013B8 001457 (v01 AMD    CPMDFIGP 00000001 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13eff6000-0x13effafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000008ca88fff]
[    0.000000]   node   0: [mem 0x000000008cab9000-0x000000008cd73fff]
[    0.000000]   node   0: [mem 0x000000008e236000-0x000000008e236fff]
[    0.000000]   node   0: [mem 0x000000008e43d000-0x000000008e881fff]
[    0.000000]   node   0: [mem 0x000000008eff3000-0x000000008effffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[    0.000000] On node 0 totalpages: 835892
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8967 pages used for memmap
[    0.000000]   DMA32 zone: 573847 pages, LIFO batch:31
[    0.000000]   Normal zone: 4032 pages used for memmap
[    0.000000]   Normal zone: 258048 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ca89000-0x8cab8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8cd74000-0x8ce30fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ce31000-0x8e235fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8e237000-0x8e43cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8e882000-0x8eff2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8f000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x8f000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013ec00000 s98008 r8192 d28968 u524288
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 822808
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic root=UUID=d4e1384b-6e94-4516-b014-d8185dbed805 ro recovery nomodeset
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3168332K/3343568K available (8394K kernel code, 1282K rwdata, 3944K rodata, 1480K init, 1292K bss, 175236K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:456 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2096.186 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.37 BogoMIPS (lpj=8384744)
[    0.000094] pid_max: default: 32768 minimum: 301
[    0.000132] ACPI: Core revision 20150930
[    0.005550] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.005705] Security Framework initialized
[    0.005738] Yama: becoming mindful.
[    0.005788] AppArmor: AppArmor initialized
[    0.006134] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.007467] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.008091] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.008146] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.008430] Initializing cgroup subsys io
[    0.008480] Initializing cgroup subsys memory
[    0.008519] Initializing cgroup subsys devices
[    0.008554] Initializing cgroup subsys freezer
[    0.008588] Initializing cgroup subsys net_cls
[    0.008622] Initializing cgroup subsys perf_event
[    0.008656] Initializing cgroup subsys net_prio
[    0.008690] Initializing cgroup subsys hugetlb
[    0.008726] Initializing cgroup subsys pids
[    0.008780] CPU: Physical Processor ID: 0
[    0.008813] CPU: Processor Core ID: 0
[    0.008846] mce: CPU supports 7 MCE banks
[    0.008890] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.008923] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.009241] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
[    0.024770] ftrace: allocating 31994 entries in 125 pages
[    0.036920] smpboot: Max logical packages: 2
[    0.036971] smpboot: APIC(10) Converting physical 1 to logical package 0
[    0.038309] [Firmware Bug]: AMD-Vi: IOAPIC[0] not in IVRS table
[    0.038388] [Firmware Bug]: AMD-Vi: No southbridge IOAPIC found
[    0.038421] AMD-Vi: Disabling interrupt remapping
[    0.038777] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.182754] smpboot: CPU0: AMD A8-6500T APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
[    0.182895] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.183015] ... version:                0
[    0.183048] ... bit width:              48
[    0.183079] ... generic registers:      6
[    0.183112] ... value mask:             0000ffffffffffff
[    0.183144] ... max period:             00007fffffffffff
[    0.183176] ... fixed-purpose events:   0
[    0.183209] ... event mask:             000000000000003f
[    0.184026] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.186491] x86: Booting SMP configuration:
[    0.186537] .... node  #0, CPUs:      #1 #2 #3
[    0.193615] x86: Booted up 1 node, 4 CPUs
[    0.193694] smpboot: Total of 4 processors activated (16769.48 BogoMIPS)
[    0.194613] devtmpfs: initialized
[    0.198588] evm: security.selinux
[    0.198666] evm: security.SMACK64
[    0.198698] evm: security.SMACK64EXEC
[    0.198730] evm: security.SMACK64TRANSMUTE
[    0.198764] evm: security.SMACK64MMAP
[    0.198796] evm: security.ima
[    0.198828] evm: security.capability
[    0.199023] PM: Registering ACPI NVS region [mem 0x8cd74000-0x8ce30fff] (774144 bytes)
[    0.199120] PM: Registering ACPI NVS region [mem 0x8e237000-0x8e43cfff] (2121728 bytes)
[    0.199291] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.199459] pinctrl core: initialized pinctrl subsystem
[    0.199625] RTC time: 19:56:06, date: 01/12/17
[    0.199833] NET: Registered protocol family 16
[    0.210841] cpuidle: using governor ladder
[    0.222838] cpuidle: using governor menu
[    0.222896] PCCT header not found.
[    0.223086] ACPI: bus type PCI registered
[    0.223134] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.223280] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.223320] PCI: not using MMCONFIG
[    0.223352] PCI: Using configuration type 1 for base access
[    0.223386] PCI: Using configuration type 1 for extended access
[    0.223734] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.223781] mtrr: probably your BIOS does not setup all CPUs.
[    0.223814] mtrr: corrected configuration.
[    0.235450] ACPI: Added _OSI(Module Device)
[    0.235532] ACPI: Added _OSI(Processor Device)
[    0.235565] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.235599] ACPI: Added _OSI(Processor Aggregator Device)
[    0.237590] ACPI: Executed 1 blocks of module-level executable AML code
[    0.241177] ACPI: Interpreter enabled
[    0.241229] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.241327] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.241436] ACPI: (supports S0 S3 S4 S5)
[    0.241469] ACPI: Using IOAPIC for interrupt routing
[    0.241528] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.241602] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.241680] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.242309] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.246731] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.247015] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.249036] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.249118] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.249309] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.249429] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.249480] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.249517] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.249554] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.250010] PCI host bridge to bus 0000:00
[    0.250045] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.250080] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.250115] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.250149] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.250184] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.250221] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.250259] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfed3ffff window]
[    0.250296] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
[    0.250334] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.250373] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[    0.250492] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[    0.250619] pci 0000:00:01.0: [1002:999d] type 00 class 0x030000
[    0.250636] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[    0.250642] pci 0000:00:01.0: reg 0x14: [io  0xf000-0xf0ff]
[    0.250654] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[    0.250683] pci 0000:00:01.0: supports D1 D2
[    0.250764] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[    0.250777] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[    0.250811] pci 0000:00:01.1: supports D1 D2
[    0.250930] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[    0.250968] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.251012] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.251100] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[    0.251137] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.251180] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.251297] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.251343] pci 0000:00:10.0: reg 0x10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
[    0.251420] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.251478] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.251597] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[    0.251633] pci 0000:00:10.1: reg 0x10: [mem 0xfeb48000-0xfeb49fff 64bit]
[    0.251710] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[    0.251766] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.251884] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.251907] pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
[    0.251916] pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
[    0.251925] pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
[    0.251933] pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
[    0.251942] pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
[    0.251951] pci 0000:00:11.0: reg 0x24: [mem 0xfeb51000-0xfeb517ff]
[    0.252073] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.252087] pci 0000:00:12.0: reg 0x10: [mem 0xfeb50000-0xfeb50fff]
[    0.252178] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.252277] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.252306] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4f000-0xfeb4f0ff]
[    0.252365] pci 0000:00:12.2: supports D1 D2
[    0.252367] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.252410] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.252492] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.252505] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4e000-0xfeb4efff]
[    0.252590] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.252668] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.252690] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4d000-0xfeb4d0ff]
[    0.252750] pci 0000:00:13.2: supports D1 D2
[    0.252751] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.252794] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.252874] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.253003] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.253026] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[    0.253076] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.253119] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.253195] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.253338] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.253407] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.253483] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[    0.253496] pci 0000:00:14.5: reg 0x10: [mem 0xfeb4c000-0xfeb4cfff]
[    0.253582] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.253683] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[    0.253770] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[    0.253855] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[    0.253942] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[    0.254031] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[    0.254115] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[    0.254301] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.254331] pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.254352] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
[    0.254365] pci 0000:01:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.254420] pci 0000:01:00.0: supports D1 D2
[    0.254422] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.258843] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.258929] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.258932] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.258936] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.259015] pci 0000:02:00.0: [1912:0015] type 00 class 0x0c0330
[    0.259051] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe901fff 64bit]
[    0.259135] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.266841] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.266929] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.267027] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.267067] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.267070] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.267072] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.267073] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.267075] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.267077] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.267079] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xfed3ffff window] (subtractive decode)
[    0.267080] pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
[    0.267792] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
[    0.268153] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *10 11 14 15)
[    0.268517] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
[    0.268866] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
[    0.269208] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.269564] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.269938] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.270301] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.270944] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.270991] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.271032] vgaarb: loaded
[    0.271065] vgaarb: bridge control possible 0000:00:01.0
[    0.271424] SCSI subsystem initialized
[    0.271570] libata version 3.00 loaded.
[    0.271598] ACPI: bus type USB registered
[    0.271656] usbcore: registered new interface driver usbfs
[    0.271699] usbcore: registered new interface driver hub
[    0.271752] usbcore: registered new device driver usb
[    0.271960] PCI: Using ACPI for IRQ routing
[    0.279079] PCI: pci_cache_line_size set to 64 bytes
[    0.279130] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.279132] e820: reserve RAM buffer [mem 0x8ca89000-0x8fffffff]
[    0.279134] e820: reserve RAM buffer [mem 0x8cd74000-0x8fffffff]
[    0.279136] e820: reserve RAM buffer [mem 0x8e237000-0x8fffffff]
[    0.279137] e820: reserve RAM buffer [mem 0x8e882000-0x8fffffff]
[    0.279138] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff]
[    0.279139] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[    0.279261] NetLabel: Initializing
[    0.279309] NetLabel:  domain hash size = 128
[    0.279351] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.279397] NetLabel:  unlabeled traffic allowed by default
[    0.279552] clocksource: Switched to clocksource refined-jiffies
[    0.288186] AppArmor: AppArmor Filesystem Enabled
[    0.288358] pnp: PnP ACPI init
[    0.288553] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.288603] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.288689] system 00:01: [mem 0x90000000-0xbfffffff] has been reserved
[    0.288724] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.288813] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
[    0.288861] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.289080] system 00:03: [io  0x0295-0x0296] has been reserved
[    0.289128] system 00:03: [io  0x0778-0x077f] has been reserved
[    0.289163] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.289397] pnp 00:04: [dma 0 disabled]
[    0.289444] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.289720] pnp 00:05: [dma 3]
[    0.289834] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.289884] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.289960] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.290108] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.290157] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.290478] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.290526] system 00:09: [io  0x040b] has been reserved
[    0.290560] system 00:09: [io  0x04d6] has been reserved
[    0.290604] system 00:09: [io  0x0c00-0x0c01] has been reserved
[    0.290637] system 00:09: [io  0x0c14] has been reserved
[    0.290671] system 00:09: [io  0x0c50-0x0c51] has been reserved
[    0.290704] system 00:09: [io  0x0c52] has been reserved
[    0.290742] system 00:09: [io  0x0c6c] has been reserved
[    0.290776] system 00:09: [io  0x0c6f] has been reserved
[    0.290811] system 00:09: [io  0x0cd0-0x0cd1] has been reserved
[    0.290845] system 00:09: [io  0x0cd2-0x0cd3] has been reserved
[    0.290878] system 00:09: [io  0x0cd4-0x0cd5] has been reserved
[    0.290912] system 00:09: [io  0x0cd6-0x0cd7] has been reserved
[    0.290946] system 00:09: [io  0x0cd8-0x0cdf] has been reserved
[    0.290980] system 00:09: [io  0x0800-0x089f] could not be reserved
[    0.291014] system 00:09: [io  0x0b20-0x0b3f] has been reserved
[    0.291047] system 00:09: [io  0x0900-0x090f] has been reserved
[    0.291081] system 00:09: [io  0x0910-0x091f] has been reserved
[    0.291115] system 00:09: [io  0xfe00-0xfefe] has been reserved
[    0.291149] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.291183] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.291217] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.291251] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.291287] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.291330] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[    0.291366] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.291563] pnp: PnP ACPI: found 10 devices
[    0.298415] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.298536] clocksource: Switched to clocksource acpi_pm
[    0.298594] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.298630] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.298665] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.298701] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.298754] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.298789] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.298835] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.298877] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.298879] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.298881] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.298883] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.298885] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.298887] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.298888] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfed3ffff window]
[    0.298890] pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
[    0.298892] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.298894] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.298896] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.298898] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.298900] pci_bus 0000:03: resource 4 [io  0x0000-0x03af window]
[    0.298902] pci_bus 0000:03: resource 5 [io  0x03e0-0x0cf7 window]
[    0.298903] pci_bus 0000:03: resource 6 [io  0x03b0-0x03df window]
[    0.298905] pci_bus 0000:03: resource 7 [io  0x0d00-0xffff window]
[    0.298907] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.298909] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.298910] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xfed3ffff window]
[    0.298912] pci_bus 0000:03: resource 11 [mem 0xfed45000-0xffffffff window]
[    0.298946] NET: Registered protocol family 2
[    0.299173] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.299348] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.299517] TCP: Hash tables configured (established 32768 bind 32768)
[    0.299606] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.299671] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.299764] NET: Registered protocol family 1
[    0.299826] pci 0000:00:01.0: Video device with shadowed ROM
[    0.546949] PCI: CLS 64 bytes, default 64
[    0.547011] Trying to unpack rootfs image as initramfs...
[    1.151768] Freeing initrd memory: 36576K (ffff880033880000 - ffff880035c38000)
[    1.236984] iommu: Adding device 0000:00:01.0 to group 0
[    1.237081] iommu: Adding device 0000:00:01.1 to group 0
[    1.240015] iommu: Adding device 0000:00:04.0 to group 1
[    1.240571] iommu: Adding device 0000:00:05.0 to group 2
[    1.241096] iommu: Adding device 0000:00:10.0 to group 3
[    1.241191] iommu: Adding device 0000:00:10.1 to group 3
[    1.241658] iommu: Adding device 0000:00:11.0 to group 4
[    1.242177] iommu: Adding device 0000:00:12.0 to group 5
[    1.242269] iommu: Adding device 0000:00:12.2 to group 5
[    1.242856] iommu: Adding device 0000:00:13.0 to group 6
[    1.242951] iommu: Adding device 0000:00:13.2 to group 6
[    1.243478] iommu: Adding device 0000:00:14.0 to group 7
[    1.243578] iommu: Adding device 0000:00:14.2 to group 7
[    1.243626] iommu: Adding device 0000:00:14.3 to group 7
[    1.244096] iommu: Adding device 0000:00:14.4 to group 8
[    1.244616] iommu: Adding device 0000:00:14.5 to group 9
[    1.245159] iommu: Adding device 0000:00:18.0 to group 10
[    1.245254] iommu: Adding device 0000:00:18.1 to group 10
[    1.245303] iommu: Adding device 0000:00:18.2 to group 10
[    1.245352] iommu: Adding device 0000:00:18.3 to group 10
[    1.245401] iommu: Adding device 0000:00:18.4 to group 10
[    1.245449] iommu: Adding device 0000:00:18.5 to group 10
[    1.245495] iommu: Adding device 0000:01:00.0 to group 1
[    1.245539] iommu: Adding device 0000:02:00.0 to group 2
[    1.245573] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    1.245605] AMD-Vi:  Extended features:  PreF PPR GT IA
[    1.246023] AMD-Vi: Lazy IO/TLB flushing enabled
[    1.248186] perf: AMD NB counters detected
[    1.248360] LVT offset 0 assigned for vector 0x400
[    1.248421] perf: AMD IBS detected (0x000000ff)
[    1.248550] Scanning for low memory corruption every 60 seconds
[    1.249138] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.249224] audit: initializing netlink subsys (disabled)
[    1.249300] audit: type=2000 audit(1484250967.127:1): initialized
[    1.249706] Initialise system trusted keyring
[    1.250011] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    1.250046] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.252209] zbud: loaded
[    1.252621] VFS: Disk quotas dquot_6.6.0
[    1.252711] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.253123] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.253664] fuse init (API version 7.23)
[    1.253890] Key type big_key registered
[    1.253956] Allocating IMA MOK and blacklist keyrings.
[    1.254775] Key type asymmetric registered
[    1.254811] Asymmetric key parser 'x509' registered
[    1.254887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.254989] io scheduler noop registered
[    1.255024] io scheduler deadline registered (default)
[    1.255096] io scheduler cfq registered
[    1.255448] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.255531] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.255686] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.255738] ACPI: Power Button [PWRB]
[    1.255813] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.255863] ACPI: Power Button [PWRF]
[    1.255933] ACPI: acpi_idle registered with cpuidle
[    1.256610] GHES: HEST is not enabled!
[    1.256812] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.277306] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.279549] hpet_acpi_add: no address or irqs in _CRS
[    1.279645] Linux agpgart interface v0.103
[    1.284245] brd: module loaded
[    1.286141] loop: module loaded
[    1.286480] libphy: Fixed MDIO Bus: probed
[    1.286585] tun: Universal TUN/TAP device driver, 1.6
[    1.286620] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.286714] PPP generic driver version 2.4.2
[    1.286823] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.286860] ehci-pci: EHCI PCI platform driver
[    1.287053] QUIRK: Enable AMD PLL fix
[    1.287090] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.287128] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.287167] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.287211] ehci-pci 0000:00:12.2: debug port 1
[    1.287281] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4f000
[    1.298632] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.298730] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.298765] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.298803] usb usb1: Product: EHCI Host Controller
[    1.298836] usb usb1: Manufacturer: Linux 4.4.0-34-generic ehci_hcd
[    1.298870] usb usb1: SerialNumber: 0000:00:12.2
[    1.299149] hub 1-0:1.0: USB hub found
[    1.299200] hub 1-0:1.0: 5 ports detected
[    1.299612] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.299650] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.299690] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.299744] ehci-pci 0000:00:13.2: debug port 1
[    1.299805] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4d000
[    1.310638] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.310759] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.310808] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.310846] usb usb2: Product: EHCI Host Controller
[    1.310879] usb usb2: Manufacturer: Linux 4.4.0-34-generic ehci_hcd
[    1.310913] usb usb2: SerialNumber: 0000:00:13.2
[    1.311195] hub 2-0:1.0: USB hub found
[    1.311247] hub 2-0:1.0: 5 ports detected
[    1.311495] ehci-platform: EHCI generic platform driver
[    1.311546] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.311582] ohci-pci: OHCI PCI platform driver
[    1.311773] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.311811] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.311875] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb50000
[    1.370655] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.370694] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.370732] usb usb3: Product: OHCI PCI host controller
[    1.370765] usb usb3: Manufacturer: Linux 4.4.0-34-generic ohci_hcd
[    1.370799] usb usb3: SerialNumber: 0000:00:12.0
[    1.371137] hub 3-0:1.0: USB hub found
[    1.371193] hub 3-0:1.0: 5 ports detected
[    1.371548] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.371587] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.371650] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4e000
[    1.430653] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.430692] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.430729] usb usb4: Product: OHCI PCI host controller
[    1.430762] usb usb4: Manufacturer: Linux 4.4.0-34-generic ohci_hcd
[    1.430795] usb usb4: SerialNumber: 0000:00:13.0
[    1.431075] hub 4-0:1.0: USB hub found
[    1.431130] hub 4-0:1.0: 5 ports detected
[    1.431482] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.431522] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[    1.431585] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb4c000
[    1.490647] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.490686] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.490722] usb usb5: Product: OHCI PCI host controller
[    1.490756] usb usb5: Manufacturer: Linux 4.4.0-34-generic ohci_hcd
[    1.490789] usb usb5: SerialNumber: 0000:00:14.5
[    1.491069] hub 5-0:1.0: USB hub found
[    1.491123] hub 5-0:1.0: 2 ports detected
[    1.491300] ohci-platform: OHCI generic platform driver
[    1.491351] uhci_hcd: USB Universal Host Controller Interface driver
[    1.491582] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.491620] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[    1.491849] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[    1.492040] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    1.492074] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.492110] usb usb6: Product: xHCI Host Controller
[    1.492143] usb usb6: Manufacturer: Linux 4.4.0-34-generic xhci-hcd
[    1.492176] usb usb6: SerialNumber: 0000:00:10.0
[    1.492436] hub 6-0:1.0: USB hub found
[    1.492490] hub 6-0:1.0: 2 ports detected
[    1.492630] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.492666] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[    1.495257] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.495312] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[    1.495346] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.495383] usb usb7: Product: xHCI Host Controller
[    1.495416] usb usb7: Manufacturer: Linux 4.4.0-34-generic xhci-hcd
[    1.495449] usb usb7: SerialNumber: 0000:00:10.0
[    1.495699] hub 7-0:1.0: USB hub found
[    1.495754] hub 7-0:1.0: 2 ports detected
[    1.496026] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    1.496064] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
[    1.496286] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[    1.496455] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    1.496489] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.496529] usb usb8: Product: xHCI Host Controller
[    1.496569] usb usb8: Manufacturer: Linux 4.4.0-34-generic xhci-hcd
[    1.498810] usb usb8: SerialNumber: 0000:00:10.1
[    1.498987] hub 8-0:1.0: USB hub found
[    1.499038] hub 8-0:1.0: 2 ports detected
[    1.499181] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    1.499217] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
[    1.499696] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.499748] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[    1.499782] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.499818] usb usb9: Product: xHCI Host Controller
[    1.499851] usb usb9: Manufacturer: Linux 4.4.0-34-generic xhci-hcd
[    1.499884] usb usb9: SerialNumber: 0000:00:10.1
[    1.500149] hub 9-0:1.0: USB hub found
[    1.500202] hub 9-0:1.0: 2 ports detected
[    1.500393] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.500444] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10
[    1.505721] xhci_hcd 0000:02:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[    1.505883] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[    1.505930] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.505967] usb usb10: Product: xHCI Host Controller
[    1.506000] usb usb10: Manufacturer: Linux 4.4.0-34-generic xhci-hcd
[    1.506033] usb usb10: SerialNumber: 0000:02:00.0
[    1.506288] hub 10-0:1.0: USB hub found
[    1.506340] hub 10-0:1.0: 2 ports detected
[    1.506494] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.506533] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 11
[    1.509262] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.509358] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[    1.509392] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.509428] usb usb11: Product: xHCI Host Controller
[    1.509461] usb usb11: Manufacturer: Linux 4.4.0-34-generic xhci-hcd
[    1.509494] usb usb11: SerialNumber: 0000:02:00.0
[    1.509747] hub 11-0:1.0: USB hub found
[    1.509800] hub 11-0:1.0: 2 ports detected
[    1.509973] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.510398] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.510434] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.510793] mousedev: PS/2 mouse device common for all mice
[    1.511006] rtc_cmos 00:07: RTC can wake from S4
[    1.511162] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.511214] rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram
[    1.511255] i2c /dev entries driver
[    1.511355] device-mapper: uevent: version 1.0.3
[    1.511488] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.511543] ledtrig-cpu: registered to indicate activity on CPUs
[    1.512071] NET: Registered protocol family 10
[    1.512497] NET: Registered protocol family 17
[    1.512564] Key type dns_resolver registered
[    1.513150] microcode: CPU0: patch_level=0x06001119
[    1.513190] microcode: CPU1: patch_level=0x06001119
[    1.513238] microcode: CPU2: patch_level=0x06001119
[    1.513289] microcode: CPU3: patch_level=0x06001119
[    1.513371] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.513647] registered taskstats version 1
[    1.513697] Loading compiled-in X.509 certificates
[    1.514727] Loaded X.509 cert 'Build time autogenerated kernel key: c40ffa48d8617ce4553ee3ab59017c95e74f2501'
[    1.514798] zswap: loaded using pool lzo/zbud
[    1.518155] Key type trusted registered
[    1.524019] Key type encrypted registered
[    1.524067] AppArmor: AppArmor sha1 policy hashing enabled
[    1.524105] ima: No TPM chip found, activating TPM-bypass!
[    1.524163] evm: HMAC attrs: 0x1
[    1.524650]   Magic number: 1:776:950
[    1.524718] tty tty7: hash matches
[    1.524773] memory memory3: hash matches
[    1.524855] rtc_cmos 00:07: setting system clock to 2017-01-12 19:56:08 UTC (1484250968)
[    1.525086] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.525339] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.525373] EDD information not available.
[    1.525519] PM: Hibernation image not present or could not be loaded.
[    1.527171] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    1.527254] Write protecting the kernel read-only data: 14336k
[    1.528233] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000)
[    1.528866] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[    1.544546] random: systemd-udevd urandom read with 4 bits of entropy available
[    1.577101] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.579677] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.579781] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.580096] acpi device:02: registered as cooling_device4
[    1.580223] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    1.587020] wmi: Mapper loaded
[    1.590574] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.590628] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.595474] ahci 0000:00:11.0: version 3.0
[    1.595885] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.595932] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio sxs 
[    1.599492] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc900006ec000, d8:cb:8a:3e:5c:b3, XID 0c000800 IRQ 41
[    1.599541] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.603566] scsi host0: ahci
[    1.603826] [drm] Initialized drm 1.1.0 20060810
[    1.606567] scsi host1: ahci
[    1.606901] scsi host2: ahci
[    1.607076] scsi host3: ahci
[    1.607363] scsi host4: ahci
[    1.607555] scsi host5: ahci
[    1.607664] ata1: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 40
[    1.607708] ata2: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51180 irq 40
[    1.607748] ata3: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51200 irq 40
[    1.607794] ata4: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51280 irq 40
[    1.607833] ata5: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51300 irq 40
[    1.607873] ata6: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 40
[    1.610510] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    1.641347] [drm] VGACON disable radeon kernel modesetting.
[    1.641410] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[    1.755141] usb 1-3: New USB device found, idVendor=05e3, idProduct=0745
[    1.755181] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[    1.755215] usb 1-3: Product: USB Storage
[    1.755249] usb 1-3: SerialNumber: 000000000903
[    1.762380] usb-storage 1-3:1.0: USB Mass Storage device detected
[    1.762616] scsi host6: usb-storage 1-3:1.0
[    1.762754] usbcore: registered new interface driver usb-storage
[    1.764374] usbcore: registered new interface driver uas
[    1.766613] usb 4-1: new low-speed USB device number 2 using ohci-pci
[    1.810604] usb 8-1: new high-speed USB device number 2 using xhci_hcd
[    1.814599] usb 10-1: new high-speed USB device number 2 using xhci_hcd
[    1.926631] ata3: SATA link down (SStatus 0 SControl 300)
[    1.926713] ata4: SATA link down (SStatus 0 SControl 300)
[    1.926777] ata2: SATA link down (SStatus 0 SControl 300)
[    1.933720] usb 4-1: New USB device found, idVendor=099a, idProduct=610c
[    1.933759] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.933794] usb 4-1: Product: EL USB Keyboard 
[    1.943897] hidraw: raw HID events driver (C) Jiri Kosina
[    1.946924] usb 10-1: New USB device found, idVendor=03f0, idProduct=8811
[    1.946961] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.946999] usb 10-1: Product: Deskjet 1000 J110 series
[    1.947032] usb 10-1: Manufacturer: HP
[    1.947065] usb 10-1: SerialNumber: CN15924MP105D2
[    1.947450] usb 8-1: New USB device found, idVendor=04b8, idProduct=011e
[    1.947485] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.947523] usb 8-1: Product: EPSON Scanner
[    1.947560] usb 8-1: Manufacturer: EPSON
[    1.957056] usbcore: registered new interface driver usbhid
[    1.957095] usbhid: USB HID core driver
[    1.959428] input: EL USB Keyboard  as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/0003:099A:610C.0001/input/input6
[    2.014850] hid-generic 0003:099A:610C.0001: input,hidraw0: USB HID v1.00 Keyboard [EL USB Keyboard ] on usb-0000:00:13.0-1/input0
[    2.015165] input: EL USB Keyboard  as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.1/0003:099A:610C.0002/input/input7
[    2.058591] usb 10-2: new full-speed USB device number 3 using xhci_hcd
[    2.058640] usb 8-2: new full-speed USB device number 3 using xhci_hcd
[    2.070924] hid-generic 0003:099A:610C.0002: input,hidraw1: USB HID v1.00 Device [EL USB Keyboard ] on usb-0000:00:13.0-1/input1
[    2.098609] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.098673] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.098724] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.099471] ata1.00: ATA-8: WDC WD5000AZRX-00L4HB0, 01.01A01, max UDMA/133
[    2.099513] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.101904] ata5.00: ATAPI: ATAPI   iHDS118   7, VL08, max UDMA/100
[    2.101961] ata6.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[    2.102541] ata1.00: configured for UDMA/133
[    2.102782] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AZRX-0 1A01 PQ: 0 ANSI: 5
[    2.102935] ata6.00: configured for UDMA/100
[    2.103209] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.103255] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.103256] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.103366] ata5.00: configured for UDMA/100
[    2.103367] sd 0:0:0:0: [sda] Write Protect is off
[    2.103378] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.103458] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.106725] scsi 4:0:0:0: CD-ROM            ATAPI    iHDS118   7      VL08 PQ: 0 ANSI: 5
[    2.124991] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    2.125033] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.125389] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.125500] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.127626] scsi 5:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB01 PQ: 0 ANSI: 5
[    2.146416] sr 5:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.146713] sr 5:0:0:0: Attached scsi CD-ROM sr1
[    2.146837] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    2.164608]  sda: sda1 sda2 < sda5 >
[    2.165197] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.225858] usb 8-2: New USB device found, idVendor=046d, idProduct=c52f
[    2.225898] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.225933] usb 8-2: Product: USB Receiver
[    2.225966] usb 8-2: Manufacturer: Logitech
[    2.227287] usb 10-2: New USB device found, idVendor=041e, idProduct=30d7
[    2.227327] usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.227364] usb 10-2: Product: USB Sound Blaster HD
[    2.227398] usb 10-2: Manufacturer: Creative Technology
[    2.227432] usb 10-2: SerialNumber: 000000bI
[    2.227642] usb 10-2: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.242362] input: Creative Technology USB Sound Blaster HD as /devices/pci0000:00/0000:00:05.0/0000:02:00.0/usb10/10-2/10-2:1.5/0003:041E:30D7.0003/input/input8
[    2.246593] tsc: Refined TSC clocksource calibration: 2096.083 MHz
[    2.246640] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e36bc5d01e, max_idle_ns: 440795291319 ns
[    2.247055] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/0003:046D:C52F.0004/input/input9
[    2.294673] hid-generic 0003:041E:30D7.0003: input,hidraw2: USB HID v1.11 Device [Creative Technology USB Sound Blaster HD] on usb-0000:02:00.0-2/input5
[    2.294902] hid-generic 0003:046D:C52F.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-2/input0
[    2.319956] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.1/0003:046D:C52F.0005/input/input10
[    2.374889] hid-generic 0003:046D:C52F.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.1-2/input1
[    2.764444] scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0903 PQ: 0 ANSI: 6
[    2.764990] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    2.769613] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    3.246757] clocksource: Switched to clocksource tsc
[    3.820653] random: nonblocking pool is initialized
[    7.924555] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    9.080216] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    9.080431] systemd[1]: Detected architecture x86-64.
[    9.125422] systemd[1]: Set hostname to <helmuth-MS-7721>.
[   11.293101] systemd[1]: Listening on udev Control Socket.
[   11.293482] systemd[1]: Listening on Journal Socket (/dev/log).
[   11.293759] systemd[1]: Listening on Journal Socket.
[   11.294150] systemd[1]: Created slice User and Session Slice.
[   11.294410] systemd[1]: Listening on udev Kernel Socket.
[   11.294652] systemd[1]: Reached target Encrypted Volumes.
[   11.294953] systemd[1]: Listening on Journal Audit Socket.
[   11.295214] systemd[1]: Reached target User and Group Name Lookups.
[   11.295469] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   11.295716] systemd[1]: Listening on fsck to fsckd communication Socket.
[   11.295988] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   11.296230] systemd[1]: Reached target Remote File Systems (Pre).
[   11.296464] systemd[1]: Reached target Remote File Systems.
[   11.296807] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   11.297080] systemd[1]: Listening on Syslog Socket.
[   11.297374] systemd[1]: Created slice System Slice.
[   11.314246] systemd[1]: Mounting POSIX Message Queue File System...
[   11.314510] systemd[1]: Reached target Slices.
[   11.315407] systemd[1]: Starting Journal Service...
[   11.316231] systemd[1]: Started Braille Device Support.
[   11.317458] systemd[1]: Starting Set console keymap...
[   11.318352] systemd[1]: Started Read required files in advance.
[   11.319265] systemd[1]: Mounting Huge Pages File System...
[   11.674313] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   11.675238] systemd[1]: Starting Uncomplicated firewall...
[   11.734383] systemd[1]: Starting Load Kernel Modules...
[   11.735347] systemd[1]: Mounting Debug File System...
[   11.747308] systemd[1]: Started Uncomplicated firewall.
[   11.783081] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   11.794433] systemd[1]: Starting Create Static Device Nodes in /dev...
[   11.963628] systemd[1]: Mounted POSIX Message Queue File System.
[   11.963914] systemd[1]: Mounted Debug File System.
[   11.964166] systemd[1]: Mounted Huge Pages File System.
[   12.250176] systemd[1]: Started Journal Service.
[   12.618804] lp: driver loaded but no devices found
[   12.701954] ppdev: user-space parallel port driver
[   12.737191] parport_pc 00:05: reported by Plug and Play ACPI
[   12.737310] parport0: PC-style at 0x378, irq 5 [PCSPP]
[   12.834189] lp0: using parport0 (interrupt-driven).
[   19.816628] kvm: Nested Virtualization enabled
[   19.816633] kvm: Nested Paging enabled
[   28.984329] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   29.178619] systemd-journald[262]: Received request to flush runtime journal from PID 1
[   29.366511] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   29.603552] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   29.603688] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[   29.930145] [drm] VGACON disable radeon kernel modesetting.
[   29.930173] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[   29.965437] AVX version of gcm_enc/dec engaged.
[   29.965441] AES CTR mode by8 optimization enabled
[   30.281027] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[   30.329907] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
[   30.461619] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   30.461624] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   30.461627] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   30.461629] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   30.461631] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   30.461633] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[   30.461635] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[   30.461637] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[   30.477134] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[   30.477215] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[   30.477288] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[   30.477358] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[   30.477430] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[   30.477501] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[   30.477574] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input18
[   30.477644] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input19
[   30.733109] usbcore: registered new interface driver snd-usb-audio
[   31.343380] audit: type=1400 audit(1484250998.314:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=952 comm="apparmor_parser"
[   31.343390] audit: type=1400 audit(1484250998.314:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=952 comm="apparmor_parser"
[   31.343396] audit: type=1400 audit(1484250998.314:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=952 comm="apparmor_parser"
[   31.343402] audit: type=1400 audit(1484250998.314:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=952 comm="apparmor_parser"
[   31.344785] audit: type=1400 audit(1484250998.314:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=956 comm="apparmor_parser"
[   31.425695] audit: type=1400 audit(1484250998.398:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=957 comm="apparmor_parser"
[   31.425707] audit: type=1400 audit(1484250998.398:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=957 comm="apparmor_parser"
[   31.443295] audit: type=1400 audit(1484250998.414:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=953 comm="apparmor_parser"
[   31.443304] audit: type=1400 audit(1484250998.414:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=953 comm="apparmor_parser"
[   31.443310] audit: type=1400 audit(1484250998.414:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=953 comm="apparmor_parser"
[   33.682326] Adding 3341308k swap on /dev/sda5.  Priority:-1 extents:1 across:3341308k FS
[   33.757493] usblp 10-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8811
[   33.757526] usbcore: registered new interface driver usblp
[   34.115704] cgroup: new mount options do not match the existing superblock, will be ignored
[   38.431311] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   38.967256] r8169 0000:01:00.0 eth0: link down
[   38.967274] r8169 0000:01:00.0 eth0: link down
[   38.967337] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   39.396050] usblp1: removed
[   39.401094] usblp 10-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8811
[   39.525117] usblp1: removed
[   39.531781] usblp 10-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8811
[   41.461074] r8169 0000:01:00.0 eth0: link up
[   41.461086] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   42.886145] ip_tables: (C) 2000-2006 Netfilter Core Team
[   43.029315] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   43.114714] Ebtables v2.0 registered
[   43.767869] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   43.836689] device virbr0-nic entered promiscuous mode
[   44.317652] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   44.763401] virbr0: port 1(virbr0-nic) entered listening state
[   44.763414] virbr0: port 1(virbr0-nic) entered listening state
[   45.050911] virbr0: port 1(virbr0-nic) entered disabled state
[   45.178480] device virbr0-nic left promiscuous mode
[   45.178510] virbr0: port 1(virbr0-nic) entered disabled state
[ 2114.713473] sd 6:0:0:0: [sdb] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
[ 2114.726748]  sdb: sdb1
[ 3805.285722] sd 6:0:0:0: [sdb] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
[ 3805.297241]  sdb: sdb1
[ 3816.037079] sd 6:0:0:0: [sdb] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
[ 3816.048716]  sdb: sdb1
[ 3888.132202] usb 8-1: USB disconnect, device number 2
[19598.429025] perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[35316.261031] usb 8-1: new high-speed USB device number 4 using xhci_hcd
[35316.397697] usb 8-1: New USB device found, idVendor=04b8, idProduct=011e
[35316.397706] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[35316.397711] usb 8-1: Product: EPSON Scanner
[35316.397729] usb 8-1: Manufacturer: EPSON
[36239.143255] usb 8-1: USB disconnect, device number 4
[38641.211061] usb 8-1: new high-speed USB device number 5 using xhci_hcd
[38641.348220] usb 8-1: New USB device found, idVendor=04b8, idProduct=011e
[38641.348228] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[38641.348233] usb 8-1: Product: EPSON Scanner
[38641.348236] usb 8-1: Manufacturer: EPSON
[38957.151904]  sdb: sdb1
 helmuth@helmuth-MS-7721:~$ dpkg -l | grep exfat
helmuth@helmuth-MS-7721:~$ dpkg -l | grep exfat

tomtomtom Team-Icon

Supporter
Avatar von tomtomtom

Anmeldungsdatum:
22. August 2008

Beiträge: 55432

Wohnort: Berlin

Naja, wenn da weder exfat-fuse noch exfat-utils installiert ist kann dein System mit exFAT natürlich nichts anfangen. 😉

helsup

(Themenstarter)

Anmeldungsdatum:
1. Mai 2014

Beiträge: 96

super, ich bin nah dran 😬

gib mir bitte die Komandos für beide Programme vor, danke

unbuntuS12

Anmeldungsdatum:
2. Juni 2010

Beiträge: 1816

Die kannst du mit dem Paketverwaltungsfrontend deiner Wahl installieren. Wenn es über die Kommandozeile gehen soll, dann z.B. mit dem dort verlinkten apt-get-Kommando "install". Im Link ist beschrieben, wie das geht.

helsup

(Themenstarter)

Anmeldungsdatum:
1. Mai 2014

Beiträge: 96

mit Synaptic- Paketverwaltung habe ich exfat-fuels und exfat-utils instaliert

sebix Team-Icon

Ehemalige

Anmeldungsdatum:
14. April 2009

Beiträge: 5582

Dann kannst du nun mit exFAT formatieren

Thomas_Do schrieb:

Wenn die Karte erkannt wird ist doch gut. Du kannst sie dann z.B. mit gparted neu formatieren.

unbuntuS12

Anmeldungsdatum:
2. Juni 2010

Beiträge: 1816

Dann kannst du sie jetzt, wie ThomasDo vorschlug, mit gparted formatieren. Oder im Terminal mit parted. Was dir lieber ist.

helsup

(Themenstarter)

Anmeldungsdatum:
1. Mai 2014

Beiträge: 96

... die Karte wird mit "Laufwerke" nicht aufgeführt, was zuvor der Fall war. Ich weiß nicht, wie ich sie packen kann. Sie ist im Verborgenen

unbuntuS12

Anmeldungsdatum:
2. Juni 2010

Beiträge: 1816

Dann zeige bitte erneut

sudo fdisk --list

helsup

(Themenstarter)

Anmeldungsdatum:
1. Mai 2014

Beiträge: 96

helmuth@helmuth-MS-7721:~$ sudo fdisk --list
[sudo] Passwort für helmuth: 
Medium /dev/ram0: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram1: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram2: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram3: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram4: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram5: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram6: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram7: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram8: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram9: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram10: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram11: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram12: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram13: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram14: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/ram15: 64 MiB, 67108864 Bytes, 131072 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes


Medium /dev/sda: 465,8 GiB, 500107862016 Bytes, 976773168 Sektoren
Einheiten: sectors von 1 * 512 = 512 Bytes
Sektorengröße (logisch/physisch): 512 Bytes / 4096 Bytes
I/O Größe (minimal/optimal): 4096 Bytes / 4096 Bytes
Typ der Medienbezeichnung: dos
Medienkennung: 0x000a95ec

Gerät      Boot     Start      Ende  Sektoren Größe Id Typ
/dev/sda1  *         2048 970086399 970084352 462,6G 83 Linux
/dev/sda2       970088446 976771071   6682626   3,2G  5 Erweiterte
/dev/sda5       970088448 976771071   6682624   3,2G 82 Linux Swap / Solaris

Die Partition 2 beginnt nicht im Bereich der physischen Sektoren.


sebix Team-Icon

Ehemalige

Anmeldungsdatum:
14. April 2009

Beiträge: 5582

Der Datenträger taucht in der Liste nicht auf. Kannst du mal die Karte neu einstecken und dann die Ausgabe von dmesg posten?

Antworten |