Hallo
Laut wiki habe ich folgende Programme (32 Bit) nachinstalliert:
Für die 32-bit und die 64-bit-Version ist die Installation des folgenden Pakets erforderlich [1]: lsb-core (nur Ubuntu 14.04) Wiki/Vorlagen/Installbutton/button.png mit apturl Paketliste zum Kopieren: apt-get aptitude sudo apt-get install lsb-core Die jeweils aktuelle stabile Version erhält man im Download-Bereich {de} {dl} der offiziellen Website. Dort lädt man je nach Systemarchitektur entweder die 32- oder die 64-bit-Version herunter. Das heruntergeladene DEB-Paket kann nun manuell installiert werden [2]. 32-Bit-Version in einem 64-Bit-System Folgende Pakete sind vorab zu installieren: lsb-core (nur Ubuntu 14.04) libc6:i386 (32-Bit-Paket) libfontconfig1:i386 (32-Bit-Paket) libglib2.0-0:i386 (32-Bit-Paket) libglu1-mesa:i386 (32-Bit-Paket) libsm6:i386 (32-Bit-Paket) libx11-6:i386 (32-Bit-Paket) libxext6:i386 (32-Bit-Paket) libxrender1:i386 (32-Bit-Paket) Wiki/Vorlagen/Installbutton/button.png mit apturl Paketliste zum Kopieren: apt-get aptitude sudo apt-get install lsb-core libc6:i386 libfontconfig1:i386 libglib2.0-0:i386 libglu1-mesa:i386 libsm6:i386 libx11-6:i386 libxext6:i386 libxrender1:i386 Außerdem wird eine passende 32-Bit-Version von libgl1-mesa-glx benötigt. Benutzer von LTS-Versionen haben möglicherweise einen LTS Enablement Stack installiert und müssen daher auch die dazu passende Version von libgl1-mesa-glx wählen. Die folgenden Terminalbefehle [3] installieren die richtige Version: pkg=$(dpkg-query -l libgl1-mesa-glx | grep -m1 ^ii[[:space:]]* | grep -o libgl1-mesa-glx[[:graph:]]* | sed -r s/:\(i386\|amd64\)/""/g) sudo apt-get install $pkg:i386 Wer keinen LTS Enablement Stack installiert hat (Ubuntu 14.04 und 14.04.1), wählt das folgende Paket: libgl1-mesa-glx:i386 (32-Bit-Paket) Wiki/Vorlagen/Installbutton/button.png mit apturl Paketliste zum Kopieren: apt-get aptitude sudo apt-get install libgl1-mesa-glx:i386 Das zuvor von der Website heruntergeladene DEB-Paket von Google Earth kann nun manuell installiert werden [2].
sowie:
sudo apt-get install lsb-core
Hier meine Hardwareinfos:
sudo lshw -short [sudo] Passwort für pat: H/W-Pfad Gerät Klasse Beschreibung ========================================================== system To Be Filled By O.E.M. (To Be Fill /0 bus N68C-S UCC /0/0 memory 64KiB BIOS /0/3 processor AMD Phenom(tm) II X4 945 Processor /0/3/5 memory 512KiB L1 Cache /0/3/6 memory 2MiB L2 Cache /0/e memory 16GiB Systemspeicher /0/e/0 memory 8GiB DIMMProject-Id-Version: lshwR /0/e/1 memory 8GiB DIMMProject-Id-Version: lshwR /0/4 memory RAM memory /0/1 bridge MCP61 LPC Bridge /0/1.1 bus MCP61 SMBus /0/1.2 memory RAM memory /0/2 bus MCP61 USB 1.1 Controller /0/2/1 usb2 bus OHCI PCI host controller /0/2/1/1 input Wired Keyboard 600 /0/2/1/2 scsi6 printer DCP-J515W /0/2/1/2/0.0.0 /dev/sdh disk DCP-J515W /0/2/1/2/0.0.0/0 /dev/sdh disk /0/2.1 bus MCP61 USB 2.0 Controller /0/2.1/1 usb1 bus EHCI Host Controller /0/2.1/1/9 bus USB2.0 Hub /0/2.1/1/9/1 input 2.4G Keyboard Mouse /0/2.1/1/9/3 scsi7 storage USB3.0 Card Reader /0/2.1/1/9/3/0.0.0 /dev/sdc disk USB3.0 CRW-CF/MD /0/2.1/1/9/3/0.0.0/0 /dev/sdc disk /0/2.1/1/9/3/0.0.1 /dev/sdd disk USB3.0 CRW-SM/xD /0/2.1/1/9/3/0.0.1/0 /dev/sdd disk /0/2.1/1/9/3/0.0.2 /dev/sde disk USB3.0 CRW-SD /0/2.1/1/9/3/0.0.2/0 /dev/sde disk /0/2.1/1/9/3/0.0.3 /dev/sdf disk USB3.0 CRW-MS /0/2.1/1/9/3/0.0.3/0 /dev/sdf disk /0/2.1/1/9/3/0.0.4 /dev/sdg disk USB3.0 CRW-SD/MS /0/2.1/1/9/3/0.0.4/0 /dev/sdg disk /0/2.1/1/9/4 multimedia Microsoft /0/2.1/1/a bus HighSpeed Hub /0/2.1/1/a/2 multimedia Microsoft LifeChat LX-3000 /0/2.1/1/a/3 input Generic USB Joystick /0/2.1/1/a/4 storage Mass Storage /0/100 bridge MCP61 PCI bridge /0/100/8 bus VT6306/7/8 [Fire II(M)] IEEE 1394 /0/5 multimedia MCP61 High Definition Audio /0/6 storage MCP61 IDE /0/8 storage MCP61 SATA Controller /0/8.1 storage MCP61 SATA Controller /0/9 bridge MCP61 PCI Express bridge /0/9/0 display GF116 [GeForce GTX 550 Ti] /0/9/0.1 multimedia GF116 High Definition Audio Contro /0/b bridge MCP61 PCI Express bridge /0/b/0 enp3s0 network 82574L Gigabit Network Connection /0/c bridge MCP61 PCI Express bridge /0/101 bridge Family 10h Processor HyperTranspor /0/102 bridge Family 10h Processor Address Map /0/103 bridge Family 10h Processor DRAM Controll /0/104 bridge Family 10h Processor Miscellaneous /0/105 bridge Family 10h Processor Link Control /0/7 scsi2 storage /0/7/0.0.0 /dev/sda disk 1TB ST1000DM003-1CH1 /0/7/0.0.0/1 /dev/sda1 volume 350MiB Windows NTFS Laufwerk /0/7/0.0.0/2 /dev/sda2 volume 376GiB Windows NTFS Laufwerk /0/7/0.0.0/3 /dev/sda3 volume 478MiB Windows NTFS Laufwerk /0/7/0.0.0/4 /dev/sda4 volume 554GiB Extended partition /0/7/0.0.0/4/5 /dev/sda5 volume 15GiB Linux swap Laufwerk /0/7/0.0.0/4/6 /dev/sda6 volume 538GiB EXT4-Laufwerk /0/a scsi4 storage /0/a/0.0.0 /dev/cdrom disk DVDRAM GH24NS90 /0/d scsi5 storage /0/d/0.0.0 /dev/cdrw disk CDDVDW SH-224FB /0/f scsi8 storage /0/f/0.0.0 /dev/sdb disk 4005MB Flash Disk /0/f/0.0.0/0 /dev/sdb disk 4005MB /0/f/0.0.0/0/1 /dev/sdb1 volume 3819MiB Windows FAT Laufwerk pat@pat-desktop:~$ lspci -nnk | grep -i VGA -A2 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF116 [GeForce GTX 550 Ti] [10de:1244] (rev a1) Subsystem: eVga.com. Corp. GF116 [GeForce GTX 550 Ti] [3842:1559] Kernel driver in use: nvidia Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia -- Subsystem: eVga.com. Corp. GF116 High Definition Audio Controller [3842:1559] Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel pat@pat-desktop:~$ lsb_release -a LSB Version: core-9.20170808ubuntu1-noarch:security-9.20170808ubuntu1-noarch Distributor ID: Ubuntu Description: Ubuntu 18.04 LTS Release: 18.04 Codename: bionic
cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 16 model : 4 model name : AMD Phenom(tm) II X4 945 Processor stepping : 3 microcode : 0x10000c8 cpu MHz : 800.000 cache size : 512 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate vmmcall npt lbrv svm_lock nrip_save bugs : tlb_mmatch fxsave_leak sysret_ss_attrs null_seg spectre_v1 spectre_v2 bogomips : 6027.46 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate processor : 1 vendor_id : AuthenticAMD cpu family : 16 model : 4 model name : AMD Phenom(tm) II X4 945 Processor stepping : 3 microcode : 0x10000c8 cpu MHz : 800.000 cache size : 512 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 4 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate vmmcall npt lbrv svm_lock nrip_save bugs : tlb_mmatch fxsave_leak sysret_ss_attrs null_seg spectre_v1 spectre_v2 bogomips : 6027.46 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate processor : 2 vendor_id : AuthenticAMD cpu family : 16 model : 4 model name : AMD Phenom(tm) II X4 945 Processor stepping : 3 microcode : 0x10000c8 cpu MHz : 800.000 cache size : 512 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 4 apicid : 2 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate vmmcall npt lbrv svm_lock nrip_save bugs : tlb_mmatch fxsave_leak sysret_ss_attrs null_seg spectre_v1 spectre_v2 bogomips : 6027.46 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate processor : 3 vendor_id : AuthenticAMD cpu family : 16 model : 4 model name : AMD Phenom(tm) II X4 945 Processor stepping : 3 microcode : 0x10000c8 cpu MHz : 800.000 cache size : 512 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 4 apicid : 3 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate vmmcall npt lbrv svm_lock nrip_save bugs : tlb_mmatch fxsave_leak sysret_ss_attrs null_seg spectre_v1 spectre_v2 bogomips : 6027.46 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate
Problem ist, das nach starten von google earth und dem entsprechenden Flugziel: zb. Berlin, San Francisco, ec. ... das Ziel erst korrekt angeflogen wird. Nachdem der Flug abgeschlossen ist und der Bildschirm "steht" vergrößere ich das im Zielfeld gelegende detaillierte Ziel mit der Maus!
Danach erfolgt ein Absturz!!
Im Terminal erfolgt (Programm wurde im Terminal gestartet folgende Fehlermeldung:
pat@pat-desktop:~$ google-earth-pro Google Earth has caught signal 4. We apologize for the inconvenience, but Google Earth has crashed. This is a bug in the program, and should never happen under normal circumstances. A bug report and debugging data have been written to this text file: /home/pat/.googleearth/crashlogs/crashlog-5b30fdff.txt Please include this file if you submit a bug report to Google.
Der Sprachcode zum anfliegen der Ziele habe ich wie folgt abgeändert:
sudo -H gedit /usr/bin/google-earth-pro Sieht zur Zeit so aus: {{{ #!/bin/sh # Always run Google Earth from this shell script and not # Google Earth directly! This script makes sure the app looks # in the right place for libraries that might also be installed # elsewhere on your system. # # Ryan C. Gordon, Thu Jul 20 14:32:33 PDT 2006 # Function to find the real directory a program resides in. FindPath() { fullpath="`echo $1 | grep /`" if [ "$fullpath" = "" ]; then oIFS="$IFS" IFS=: for path in $PATH do if [ -x "$path/$1" ]; then if [ "$path" = "" ]; then path="." fi fullpath="$path/$1" break fi done IFS="$oIFS" fi if [ "$fullpath" = "" ]; then fullpath="$1" fi # Is the sed/ls magic portable? if [ -L "$fullpath" ]; then #fullpath="`ls -l "$fullpath" | awk '{print $11}'`" fullpath=`ls -l "$fullpath" |sed -e 's/.* -> //' |sed -e 's/\*//'` fi dirname $fullpath } script_path=$(FindPath $0); cd $script_path; export LANG="en_US.UTF8 google-earth-pro" LD_LIBRARY_PATH=.:$LD_LIBRARY_PATH ./googleearth-bin "$@"
}}}
Wie man sieht ist der amerikanische Sprachanflugscode eingetragen
Die ganze Zeit war
export LANG="de_DE.ISO-8859-15" export LC_MESSAGES="de_DE.ISO-8859-15"
Das eingetragen
Das hat genausowenig gebracht.
Was kann ich tun??
LG