Hallo zusammen,
ich habe einen sehr alten PC und ein Problem. Die beiden Lüfter drehen immer voll auf. Ansonsten bin ich noch zufrieden auch wenn er schon sehr alt ist.
Ich habe einen 120er Noiseblocker ELoop PS (PWM) als CPU Lüfter und einen 140 Noiseblocker ELoop PS (PWM) als Gehäuselüfter. Da mein Board nur einen PWM Anschluss hat, hängen beiden an einen Y-Kabel.
Das Problem besteht aber auch wenn ich nur einen Lüfter angehängt habe. Ich habe mich schon so viel gespielt im Bios leider hatte ich keinen Erfolg. Im Windows (ist schon eine Weile her) ging die Regelung ganz prima.
pwmconfig erkennt keine Sensoren.
Ich bin nicht so versiert. Vielleicht kann mich da jemand Schritt für Schritt durchführen.
Hier noch Daten die sicherlich gebraucht werden.
Motherboard: Asus M4A785D-V EVO
stefan@Superman:~$ sensors atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage: 1.28 V (min = +0.85 V, max = +1.60 V) +3.3 Voltage: 3.33 V (min = +2.97 V, max = +3.63 V) +5 Voltage: 4.97 V (min = +4.50 V, max = +5.50 V) +12 Voltage: 12.04 V (min = +10.20 V, max = +13.80 V) CPU FAN Speed: 855 RPM (min = 600 RPM, max = 7200 RPM) CHASSIS FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM) POWER FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM) CPU Temperature: +41.0°C (high = +60.0°C, crit = +95.0°C) MB Temperature: +32.0°C (high = +45.0°C, crit = +75.0°C) k10temp-pci-00c3 Adapter: PCI adapter temp1: +0.0°C (high = +70.0°C) (crit = +99.5°C, hyst = +97.5°C) stefan@Superman:~$ sudo pwmconfig [sudo] Passwort für stefan: # pwmconfig version 3.6.0 This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
LG
Stefan
Bearbeitet von ChickenLipsRfun2eat:
Entspammt.