BlueBerry
Anmeldungsdatum: 5. Februar 2012
Beiträge: 20
|
Hallo, habe seid ein paar Wochen folgendes Problem: Nach ein paar Minuten oder wenn sich der PC in Standby schaltet weil ich kurz was anderes erledige stürzt scheinbar mein Maus Treiber ab. Der Mauszeiger lässt sich noch bewegen aber in manchen Fenstern nix mehr anklicken. Teilweise funktioniert es wieder sobald ich oben Rechts über das Sitzungsmenü gehe. Manchmal muss ich mir aber dan mit einen Neustart behelfen. Hatte bis gestern 15.10 drauf und mir gestern 16.4.1 neu Installiert und immer noch das selbe Problem. Denke das es ein Softwareproblem ist. Kann mir jemand helfen. Liebe Grüße Sascha
|
BlueBerry
(Themenstarter)
Anmeldungsdatum: 5. Februar 2012
Beiträge: 20
|
Hallo,
hat keiner eine Lösung. Beim einen mal Starten funktionieren die Maustasten beim Dell 6430u und beim nächsten mal nicht. Behelfe mir immer mit Neustart bis es dan funktioniert. Kanns aber nicht sein. Normale per USB angeschlossene Maus funktioniert dan auch nicht. Kann mir jemand helfen? Vielen dank in Vorraus
|
ChickenLipsRfun2eat
Anmeldungsdatum: 6. Dezember 2009
Beiträge: 12067
|
Hallo! Du bist doch nun schon länger dabei, solltest also Richtig Fragen kennen. Was hast du bisher versucht? Welche Ergebnisse kamen dabei heraus? Logdateien/journalctl durchforstet? Als Minimum solltest du die relevanten Hardwareausgaben hier einstellen, damit ein potentieller Helfer überhaupt eine Chance hat zu antworten oder gezielt Fragen zu stellen. BlueBerry schrieb: Hallo,
hat keiner eine Lösung.
Wir haben jede Menge Lösungen. Es kann nur aktuell keiner beurteilen, ob dein Problem zu einer der Lösungen passt.
|
BlueBerry
(Themenstarter)
Anmeldungsdatum: 5. Februar 2012
Beiträge: 20
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41 | Dez 09 18:49:48 sascha systemd-journald[249]: Runtime journal (/run/log/journal/) is 8.0M, max 78.5M, 70.5M free.
Dez 09 18:49:48 sascha kernel: microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26
Dez 09 18:49:48 sascha kernel: Initializing cgroup subsys cpuset
Dez 09 18:49:48 sascha kernel: Initializing cgroup subsys cpu
Dez 09 18:49:48 sascha kernel: Initializing cgroup subsys cpuacct
Dez 09 18:49:48 sascha kernel: Linux version 4.4.0-51-generic (buildd@lcy01-08) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #
Dez 09 18:49:48 sascha kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-51-generic.efi.signed root=UUID=822b5c9f-f100-4dd7-b947-109379a673d
Dez 09 18:49:48 sascha kernel: KERNEL supported cpus:
Dez 09 18:49:48 sascha kernel: Intel GenuineIntel
Dez 09 18:49:48 sascha kernel: AMD AuthenticAMD
Dez 09 18:49:48 sascha kernel: Centaur CentaurHauls
Dez 09 18:49:48 sascha kernel: x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
Dez 09 18:49:48 sascha kernel: x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
Dez 09 18:49:48 sascha kernel: x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
Dez 09 18:49:48 sascha kernel: x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
Dez 09 18:49:48 sascha kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Dez 09 18:49:48 sascha kernel: x86/fpu: Using 'eager' FPU context switches.
Dez 09 18:49:48 sascha kernel: e820: BIOS-provided physical RAM map:
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x0000000040005000-0x00000000d5f09fff] usable
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000d5f0a000-0x00000000d5ffffff] reserved
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000d6000000-0x00000000d6752fff] usable
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000d6753000-0x00000000d67fffff] type 20
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000d6800000-0x00000000d6fb2fff] usable
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000d6fb3000-0x00000000d6ffffff] ACPI data
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000d7000000-0x00000000d86fcfff] usable
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000d86fd000-0x00000000d87fffff] ACPI NVS
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000d8800000-0x00000000d948dfff] usable
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000d948e000-0x00000000da050fff] reserved
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000da051000-0x00000000da093fff] ACPI NVS
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000da094000-0x00000000daad6fff] usable
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000daad7000-0x00000000dafeffff] reserved
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000daff0000-0x00000000daffffff] usable
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Dez 09 18:49:48 sascha kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
|
Falls das weiter hilft. Weis jetzt nicht ob das das richtige ist. Musste wieder mal zwei mal starten. Bis die Maus funktionierte. Eine per usb angeschlossene Maus funktioniert dan auch nicht. Denke das ich dadurch Hardwaredefekt auschliessen kann. Kann das jemand bestätigen? Ist noch Gebrauchtgeräte Garantie drauf.
|
BlueBerry
(Themenstarter)
Anmeldungsdatum: 5. Februar 2012
Beiträge: 20
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48 | lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
DeviceName: Onboard IGD
Subsystem: Dell 3rd Gen Core processor Graphics Controller [1028:0584]
sascha@sascha:~$ xrandr --prop
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
EDID:
00ffffffffffff000dae711400000000
24150104901f1178022b359757548f29
23505400000001010101010101010101
010101010101f11d56fb500016305c3d
150035ae1000001af61356fb50001630
5c3d150035ae1000001a000000fe004a
43475259803134314247450a00000000
00004131940110000001010a202000f4
BACKLIGHT: 976
range: (0, 976)
Backlight: 976
range: (0, 976)
scaling mode: Full aspect
supported: None, Full, Center, Full aspect
1366x768 60.00*+ 40.00
1360x768 59.80 59.96
1280x720 60.00
1024x768 60.00
1024x576 60.00
960x540 60.00
800x600 60.32 56.25
864x486 60.00
640x480 59.94
720x405 60.00
680x384 60.00
640x360 60.00
DP1 disconnected (normal left inverted right x axis y axis)
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
HDMI1 disconnected (normal left inverted right x axis y axis)
aspect ratio: Automatic
supported: Automatic, 4:3, 16:9
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
|
Hoffe das sind nun die richtigen Angaben
|
BlueBerry
(Themenstarter)
Anmeldungsdatum: 5. Februar 2012
Beiträge: 20
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358 | [ 4.609]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 4.609] X Protocol Version 11, Revision 0
[ 4.609] Build Operating System: Linux 4.4.0-45-generic x86_64 Ubuntu
[ 4.609] Current Operating System: Linux sascha 4.4.0-53-generic #74-Ubuntu SMP Fri Dec 2 15:59:10 UTC 2016 x86_64
[ 4.609] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-53-generic.efi.signed root=UUID=822b5c9f-f100-4dd7-b947-109379a673d8 ro quiet splash vt.handoff=7
[ 4.609] Build Date: 02 November 2016 10:06:10PM
[ 4.609] xorg-server 2:1.18.4-0ubuntu0.2 (For technical support please see http://www.ubuntu.com/support)
[ 4.609] Current version of pixman: 0.33.6
[ 4.609] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.609] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.609] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 10 22:37:37 2016
[ 4.610] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.614] (==) No Layout section. Using the first Screen section.
[ 4.614] (==) No screen section available. Using defaults.
[ 4.614] (**) |-->Screen "Default Screen Section" (0)
[ 4.614] (**) | |-->Monitor "<default monitor>"
[ 4.615] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.615] (==) Automatically adding devices
[ 4.615] (==) Automatically enabling devices
[ 4.615] (==) Automatically adding GPU devices
[ 4.615] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.615] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4.615] Entry deleted from font path.
[ 4.615] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 4.615] Entry deleted from font path.
[ 4.615] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 4.615] Entry deleted from font path.
[ 4.615] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 4.615] Entry deleted from font path.
[ 4.615] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 4.615] Entry deleted from font path.
[ 4.615] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 4.615] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 4.615] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.615] (II) Loader magic: 0x55e6c379adc0
[ 4.616] (II) Module ABI versions:
[ 4.616] X.Org ANSI C Emulation: 0.4
[ 4.616] X.Org Video Driver: 20.0
[ 4.616] X.Org XInput driver : 22.1
[ 4.616] X.Org Server Extension : 9.0
[ 4.619] (++) using VT number 7
[ 4.619] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.619] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.621] (--) PCI:*(0:0:2:0) 8086:0166:1028:0584 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 4.621] (II) LoadModule: "glx"
[ 4.623] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.635] (II) Module glx: vendor="X.Org Foundation"
[ 4.635] compiled for 1.18.4, module version = 1.0.0
[ 4.635] ABI class: X.Org Server Extension, version 9.0
[ 4.635] (==) AIGLX enabled
[ 4.635] (==) Matched intel as autoconfigured driver 0
[ 4.635] (==) Matched intel as autoconfigured driver 1
[ 4.635] (==) Matched modesetting as autoconfigured driver 2
[ 4.635] (==) Matched fbdev as autoconfigured driver 3
[ 4.635] (==) Matched vesa as autoconfigured driver 4
[ 4.635] (==) Assigned the driver to the xf86ConfigLayout
[ 4.635] (II) LoadModule: "intel"
[ 4.636] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4.640] (II) Module intel: vendor="X.Org Foundation"
[ 4.640] compiled for 1.18.4, module version = 2.99.917
[ 4.640] Module class: X.Org Video Driver
[ 4.640] ABI class: X.Org Video Driver, version 20.0
[ 4.640] (II) LoadModule: "modesetting"
[ 4.640] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.641] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.641] compiled for 1.18.4, module version = 1.18.4
[ 4.641] Module class: X.Org Video Driver
[ 4.641] ABI class: X.Org Video Driver, version 20.0
[ 4.641] (II) LoadModule: "fbdev"
[ 4.641] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4.642] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.642] compiled for 1.18.1, module version = 0.4.4
[ 4.642] Module class: X.Org Video Driver
[ 4.642] ABI class: X.Org Video Driver, version 20.0
[ 4.642] (II) LoadModule: "vesa"
[ 4.642] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.642] (II) Module vesa: vendor="X.Org Foundation"
[ 4.642] compiled for 1.18.1, module version = 2.3.4
[ 4.642] Module class: X.Org Video Driver
[ 4.642] ABI class: X.Org Video Driver, version 20.0
[ 4.642] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4.642] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 4.642] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 4.642] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 4.642] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.642] (II) FBDEV: driver for framebuffer: fbdev
[ 4.642] (II) VESA: driver for VESA chipsets: vesa
[ 4.643] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[ 4.643] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>)
[ 4.643] (II) intel(0): SNA compiled for use with valgrind
[ 4.644] (WW) Falling back to old probe method for modesetting
[ 4.644] (WW) Falling back to old probe method for fbdev
[ 4.644] (II) Loading sub module "fbdevhw"
[ 4.644] (II) LoadModule: "fbdevhw"
[ 4.644] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4.645] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4.645] compiled for 1.18.4, module version = 0.0.2
[ 4.645] ABI class: X.Org Video Driver, version 20.0
[ 4.645] (WW) Falling back to old probe method for vesa
[ 4.646] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 4.646] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[ 4.646] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.646] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4.646] (==) intel(0): RGB weight 888
[ 4.646] (==) intel(0): Default visual is TrueColor
[ 4.646] (II) intel(0): Output LVDS1 has no monitor section
[ 4.656] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 4.656] (II) intel(0): Enabled output LVDS1
[ 4.656] (II) intel(0): Output VGA1 has no monitor section
[ 4.656] (II) intel(0): Enabled output VGA1
[ 4.656] (II) intel(0): Output HDMI1 has no monitor section
[ 4.656] (II) intel(0): Enabled output HDMI1
[ 4.656] (II) intel(0): Output DP1 has no monitor section
[ 4.656] (II) intel(0): Enabled output DP1
[ 4.656] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 4.656] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 4.656] (II) intel(0): Enabled output VIRTUAL1
[ 4.656] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 4.656] (==) intel(0): TearFree disabled
[ 4.656] (==) intel(0): DPI set to (96, 96)
[ 4.656] (II) Loading sub module "dri2"
[ 4.656] (II) LoadModule: "dri2"
[ 4.656] (II) Module "dri2" already built-in
[ 4.656] (II) Loading sub module "present"
[ 4.656] (II) LoadModule: "present"
[ 4.656] (II) Module "present" already built-in
[ 4.657] (II) UnloadModule: "modesetting"
[ 4.657] (II) Unloading modesetting
[ 4.657] (II) UnloadModule: "fbdev"
[ 4.657] (II) Unloading fbdev
[ 4.657] (II) UnloadSubModule: "fbdevhw"
[ 4.657] (II) Unloading fbdevhw
[ 4.657] (II) UnloadModule: "vesa"
[ 4.657] (II) Unloading vesa
[ 4.657] (==) Depth 24 pixmap format is 32 bpp
[ 4.662] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 4.662] (==) intel(0): Backing store enabled
[ 4.662] (==) intel(0): Silken mouse enabled
[ 4.663] (II) intel(0): HW Cursor enabled
[ 4.663] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4.664] (==) intel(0): DPMS enabled
[ 4.664] (==) intel(0): Display hotplug detection enabled
[ 4.664] (II) intel(0): [DRI2] Setup complete
[ 4.664] (II) intel(0): [DRI2] DRI driver: i965
[ 4.664] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 4.664] (II) intel(0): direct rendering: DRI2 enabled
[ 4.664] (II) intel(0): hardware support for Present enabled
[ 4.664] (--) RandR disabled
[ 4.670] (II) SELinux: Disabled on system
[ 4.695] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4.695] (II) AIGLX: enabled GLX_ARB_create_context
[ 4.695] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4.695] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 4.695] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4.695] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4.695] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 4.695] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 4.695] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 4.695] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4.695] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 4.695] (II) AIGLX: Loaded and initialized i965
[ 4.695] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.698] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 4.698] (II) intel(0): Setting screen physical size to 361 x 203
[ 4.740] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 4.740] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.740] (II) LoadModule: "evdev"
[ 4.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4.744] (II) Module evdev: vendor="X.Org Foundation"
[ 4.744] compiled for 1.18.1, module version = 2.10.1
[ 4.744] Module class: X.Org XInput Driver
[ 4.744] ABI class: X.Org XInput driver, version 22.1
[ 4.744] (II) Using input driver 'evdev' for 'Power Button'
[ 4.744] (**) Power Button: always reports core events
[ 4.744] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 4.744] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.744] (--) evdev: Power Button: Found keys
[ 4.744] (II) evdev: Power Button: Configuring as keyboard
[ 4.744] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 4.744] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.744] (**) Option "xkb_rules" "evdev"
[ 4.744] (**) Option "xkb_model" "pc105"
[ 4.744] (**) Option "xkb_layout" "de"
[ 4.761] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 4.761] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4.761] (II) Using input driver 'evdev' for 'Video Bus'
[ 4.761] (**) Video Bus: always reports core events
[ 4.761] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 4.761] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4.761] (--) evdev: Video Bus: Found keys
[ 4.761] (II) evdev: Video Bus: Configuring as keyboard
[ 4.761] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event5"
[ 4.761] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4.761] (**) Option "xkb_rules" "evdev"
[ 4.761] (**) Option "xkb_model" "pc105"
[ 4.761] (**) Option "xkb_layout" "de"
[ 4.762] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 4.762] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.762] (II) Using input driver 'evdev' for 'Power Button'
[ 4.762] (**) Power Button: always reports core events
[ 4.762] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 4.762] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.762] (--) evdev: Power Button: Found keys
[ 4.762] (II) evdev: Power Button: Configuring as keyboard
[ 4.762] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 4.762] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 4.762] (**) Option "xkb_rules" "evdev"
[ 4.762] (**) Option "xkb_model" "pc105"
[ 4.762] (**) Option "xkb_layout" "de"
[ 4.762] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 4.762] (II) No input driver specified, ignoring this device.
[ 4.762] (II) This device may have been added with another device file.
[ 4.762] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 4.762] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4.762] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4.762] (**) Sleep Button: always reports core events
[ 4.762] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 4.763] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4.763] (--) evdev: Sleep Button: Found keys
[ 4.763] (II) evdev: Sleep Button: Configuring as keyboard
[ 4.763] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 4.763] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 4.763] (**) Option "xkb_rules" "evdev"
[ 4.763] (**) Option "xkb_model" "pc105"
[ 4.763] (**) Option "xkb_layout" "de"
[ 4.763] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event8)
[ 4.763] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 4.763] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[ 4.763] (**) Laptop_Integrated_Webcam_HD: always reports core events
[ 4.763] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event8"
[ 4.763] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0x1bcf Product 0x2982
[ 4.763] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[ 4.763] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[ 4.763] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input10/event8"
[ 4.763] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[ 4.763] (**) Option "xkb_rules" "evdev"
[ 4.763] (**) Option "xkb_model" "pc105"
[ 4.763] (**) Option "xkb_layout" "de"
[ 4.764] (II) config/udev: Adding input device HDA Intel PCH Headset Mic (/dev/input/event9)
[ 4.764] (II) No input driver specified, ignoring this device.
[ 4.764] (II) This device may have been added with another device file.
[ 4.764] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 4.764] (II) No input driver specified, ignoring this device.
[ 4.764] (II) This device may have been added with another device file.
[ 4.764] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 4.764] (II) No input driver specified, ignoring this device.
[ 4.764] (II) This device may have been added with another device file.
[ 4.765] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 4.765] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4.765] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4.765] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.765] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 4.765] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4.765] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4.765] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4.765] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 4.765] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 4.765] (**) Option "xkb_rules" "evdev"
[ 4.765] (**) Option "xkb_model" "pc105"
[ 4.765] (**) Option "xkb_layout" "de"
[ 4.765] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event7)
[ 4.765] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 4.765] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchscreen catchall"
[ 4.765] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 4.765] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[ 4.765] (II) LoadModule: "synaptics"
[ 4.765] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4.766] (II) Module synaptics: vendor="X.Org Foundation"
[ 4.766] compiled for 1.18.1, module version = 1.8.2
[ 4.766] Module class: X.Org XInput Driver
[ 4.766] ABI class: X.Org XInput driver, version 22.1
[ 4.766] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 4.766] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 4.766] (**) Option "Device" "/dev/input/event7"
[ 4.824] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: ignoring touch events for semi-multitouch device
[ 4.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000 (res 21)
[ 4.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400 (res 32)
[ 4.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[ 4.824] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[ 4.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple
[ 4.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[ 4.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[ 4.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 4.824] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 4.852] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 4.852] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 12)
[ 4.852] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 4.852] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[ 4.852] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.082
[ 4.852] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 4.852] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 4.852] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 4.852] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 4.852] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 4.852] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
[ 4.852] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 4.853] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event6)
[ 4.853] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 4.853] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "trackpoint catchall"
[ 4.853] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS DualPoint Stick'
[ 4.853] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[ 4.853] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: Device: "/dev/input/event6"
[ 4.853] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Vendor 0x2 Product 0x8
[ 4.853] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found 3 mouse buttons
[ 4.853] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found relative axes
[ 4.853] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found x and y relative axes
[ 4.853] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Configuring as mouse
[ 4.853] (**) Option "Emulate3Buttons" "true"
[ 4.853] (**) Option "EmulateWheel" "true"
[ 4.853] (**) Option "EmulateWheelButton" "2"
[ 4.853] (**) Option "YAxisMapping" "4 5"
[ 4.853] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 4.853] (**) Option "XAxisMapping" "6 7"
[ 4.853] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: XAxisMapping: buttons 6 and 7
[ 4.853] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event6"
[ 4.853] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 13)
[ 4.853] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: initialized for relative axes.
[ 4.853] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) keeping acceleration scheme 1
[ 4.853] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration profile 0
[ 4.853] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[ 4.853] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[ 4.853] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse0)
[ 4.853] (II) No input driver specified, ignoring this device.
[ 4.853] (II) This device may have been added with another device file.
[ 4.855] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event12)
[ 4.855] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 4.855] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 4.855] (**) Dell WMI hotkeys: always reports core events
[ 4.855] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event12"
[ 4.855] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 4.855] (--) evdev: Dell WMI hotkeys: Found keys
[ 4.855] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 4.855] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event12"
[ 4.855] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[ 4.855] (**) Option "xkb_rules" "evdev"
[ 4.855] (**) Option "xkb_model" "pc105"
[ 4.855] (**) Option "xkb_layout" "de"
[ 5.723] (II) intel(0): EDID vendor "CMN", prod id 5233
[ 5.723] (II) intel(0): Printing DDC gathered Modelines:
[ 5.724] (II) intel(0): Modeline "1366x768"x0.0 76.65 1366 1458 1519 1617 768 769 774 790 +hsync -vsync (47.4 kHz eP)
[ 5.724] (II) intel(0): Modeline "1366x768"x0.0 51.10 1366 1458 1519 1617 768 769 774 790 +hsync -vsync (31.6 kHz e)
|
|
Benno-007
Anmeldungsdatum: 28. August 2007
Beiträge: 29240
Wohnort: Germany
|
In der Zwischenzeit, bis jemand kommt, kannst du mal versuchen, ob der Fehler auch durch STRG + ALT + F1 und danach STRG + ALT + F7 weg geht. Oder durch Abmelden/ Anmelden. Geht schneller als Neustart.
|