Festplattenstatus mit smartctl
https://forum.ubuntuusers.de/topic/festplattenstatus-mit-smartctl/#post-1427719
Festplattenstatus mit smartctl
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl --test=long /dev/sda (dauert eine weile)
bash: Syntaxfehler beim unerwarteten Wort »(«
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl --test=long /dev/sda #(dauert eine weile)
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 54 minutes for test to complete.
Test will complete after Wed Jul 8 02:39:51 2020
Use smartctl -X to abort test.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl --all /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10
Device Model: ST3160815AS
Serial Number: 6RX2LWW3
Firmware Version: 3.ADA
User Capacity: 160.000.000.000 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Wed Jul 8 01:46:38 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 097 006 Pre-fail Always - 208428627
3 Spin_Up_Time 0x0003 098 097 070 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3573
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail Always - 883752937
9 Power_On_Hours 0x0032 060 060 000 Old_age Always - 35146
10 Spin_Retry_Count 0x0013 100 099 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3571
187 Reported_Uncorrect 0x0032 089 089 000 Old_age Always - 11
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 057 049 045 Old_age Always - 43 (Min/Max 38/46)
194 Temperature_Celsius 0x0022 043 051 000 Old_age Always - 43 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 088 072 000 Old_age Always - 48579291
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 11 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 11 occurred at disk power-on lifetime: 35146 hours (1464 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 64 00 00 e0 Error: UNC at LBA = 0x00000064 = 100
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 64 00 00 e0 00 03:09:56.910 READ SECTOR(S)
27 00 00 00 00 00 e0 00 03:09:56.837 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 03:09:56.835 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 03:09:53.588 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 03:09:36.625 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 10 occurred at disk power-on lifetime: 35146 hours (1464 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 64 00 00 e0 Error: UNC at LBA = 0x00000064 = 100
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 64 00 00 e0 00 03:09:56.910 READ SECTOR(S)
27 00 00 00 00 00 e0 00 03:09:56.837 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 03:09:56.835 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 03:09:53.588 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 03:09:36.625 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 9 occurred at disk power-on lifetime: 35146 hours (1464 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 64 00 00 e0 Error: UNC at LBA = 0x00000064 = 100
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 64 00 00 e0 00 03:07:49.433 READ SECTOR(S)
33 00 01 64 00 00 e0 00 03:07:49.424 WRITE LONG (w/o retry) [OBS-4]
ea 00 01 00 00 00 a0 00 03:07:49.415 FLUSH CACHE EXT
ea 00 01 00 00 00 a0 00 03:09:53.588 FLUSH CACHE EXT
ec 00 01 00 00 00 40 00 03:09:36.625 IDENTIFY DEVICE
Error 8 occurred at disk power-on lifetime: 35144 hours (1464 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 de d4 42 e0 Error: UNC at LBA = 0x0042d4de = 4379870
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d8 d4 42 e0 00 01:16:48.000 READ DMA
e5 00 00 00 00 00 00 00 01:16:47.938 CHECK POWER MODE
27 00 00 00 00 00 e0 00 01:16:47.936 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 01:16:44.988 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:16:44.930 SET FEATURES [Set transfer mode]
Error 7 occurred at disk power-on lifetime: 35144 hours (1464 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 de d4 42 e0 Error: UNC at LBA = 0x0042d4de = 4379870
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d8 d4 42 e0 00 01:16:41.744 READ DMA
27 00 00 00 00 00 e0 00 01:16:38.819 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 01:16:38.819 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:16:44.988 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:16:44.930 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 35146 4379870
# 2 Extended offline Completed: read failure 90% 35146 4379870
# 3 Selective offline Completed: read failure 90% 35146 4379870
# 4 Selective offline Completed: read failure 90% 35146 4379870
# 5 Selective offline Completed: read failure 90% 35146 4379870
# 6 Short offline Completed: read failure 90% 35146 4379870
# 7 Extended offline Completed: read failure 90% 35146 4379870
# 8 Short offline Completed: read failure 90% 35146 4379870
# 9 Short offline Completed without error 00% 35143 -
#10 Short offline Aborted by host 80% 35133 -
#11 Extended offline Completed: read failure 90% 35121 4379870
#12 Extended offline Completed: read failure 90% 35121 4379870
#13 Extended offline Completed: read failure 90% 35119 4379870
#14 Short offline Completed without error 00% 35119 -
#15 Short offline Aborted by host 90% 35119 -
#16 Extended offline Completed: read failure 90% 35119 4379870
#17 Extended offline Completed: read failure 90% 35117 4379870
#18 Short offline Completed without error 00% 25367 -
#19 Extended offline Completed without error 00% 23080 -
#20 Short offline Completed without error 00% 21781 -
#21 Short offline Completed without error 00% 21781 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 10 Not_testing
2 5 15 Not_testing
3 10 20 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
Nach dieser Artikel habe ich das gemacht.
https://www.thomas-krenn.com/de/wiki/SMART_Tests_mit_smartctl
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -i /dev/sda
[sudo] Passwort für mimoun:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10
Device Model: ST3160815AS
Serial Number: 6RX2LWW3
Firmware Version: 3.ADA
User Capacity: 160.000.000.000 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Wed Jul 8 02:03:35 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -t select,10-20 /dev/sdc #LBA 10 bis LBA 20 (inkl.)
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Smartctl open device: /dev/sdc failed: No such device
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -t select,10-20 /dev/sda #LBA 10 bis LBA 20 (inkl.)
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Selective self-test routine immediately in off-line mode".
SPAN STARTING_LBA ENDING_LBA
0 10 20
Drive command "Execute SMART Selective self-test routine immediately in off-line mode" successful.
Testing has begun.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -t select,10+11 /dev/sda #LBA 10 bis LBA 20 (inkl.)
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Selective self-test routine immediately in off-line mode".
SPAN STARTING_LBA ENDING_LBA
0 10 20
Drive command "Execute SMART Selective self-test routine immediately in off-line mode" successful.
Testing has begun.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -t select,0-10 -t select,5-15 -t select,10-20 /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Selective self-test routine immediately in off-line mode".
SPAN STARTING_LBA ENDING_LBA
0 0 10
1 5 15
2 10 20
Drive command "Execute SMART Selective self-test routine immediately in off-line mode" successful.
Testing has begun.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -c /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -t <short|long|conveyance|select> /dev/sda
bash: Syntaxfehler beim unerwarteten Wort »>«
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -t short /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Wed Jul 8 02:09:36 2020
Use smartctl -X to abort test.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -t long /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 54 minutes for test to complete.
Test will complete after Wed Jul 8 03:02:02 2020
Use smartctl -X to abort test.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -t conveyance /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Conveyance Self-test functions not supported
Sending command: "Execute SMART Conveyance self-test routine immediately in off-line mode".
Drive command "Execute SMART Conveyance self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 3 minutes for test to complete.
Test will complete after Wed Jul 8 02:11:22 2020
Use smartctl -X to abort test.
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -t conveyance -C /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Conveyance Self-test functions not supported
Sending command: "Execute SMART Conveyance self-test routine immediately in captive mode".
Drive command "Execute SMART Conveyance self-test routine immediately in captive mode" successful.
Testing has begun.
Please wait 3 minutes for test to complete.
Test will complete after Wed Jul 8 02:12:52 2020
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -t long -C /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in captive mode".
Drive command "Execute SMART Extended self-test routine immediately in captive mode" successful.
Testing has begun.
Please wait 54 minutes for test to complete.
Test will complete after Wed Jul 8 03:04:43 2020
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -t short -C /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in captive mode".
Drive command "Execute SMART Short self-test routine immediately in captive mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Wed Jul 8 02:12:59 2020
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10
Device Model: ST3160815AS
Serial Number: 6RX2LWW3
Firmware Version: 3.ADA
User Capacity: 160.000.000.000 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Wed Jul 8 02:11:29 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 097 006 Pre-fail Always - 208428627
3 Spin_Up_Time 0x0003 098 097 070 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3573
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail Always - 883753439
9 Power_On_Hours 0x0032 060 060 000 Old_age Always - 35147
10 Spin_Retry_Count 0x0013 100 099 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3571
187 Reported_Uncorrect 0x0032 089 089 000 Old_age Always - 11
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 057 049 045 Old_age Always - 43 (Min/Max 38/46)
194 Temperature_Celsius 0x0022 043 051 000 Old_age Always - 43 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 088 072 000 Old_age Always - 48579671
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 11 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 11 occurred at disk power-on lifetime: 35146 hours (1464 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 64 00 00 e0 Error: UNC at LBA = 0x00000064 = 100
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 64 00 00 e0 00 03:09:56.910 READ SECTOR(S)
27 00 00 00 00 00 e0 00 03:09:56.837 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 03:09:56.835 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 03:09:53.588 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 03:09:36.625 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 10 occurred at disk power-on lifetime: 35146 hours (1464 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 64 00 00 e0 Error: UNC at LBA = 0x00000064 = 100
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 64 00 00 e0 00 03:09:56.910 READ SECTOR(S)
27 00 00 00 00 00 e0 00 03:09:56.837 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 03:09:56.835 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 03:09:53.588 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 03:09:36.625 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 9 occurred at disk power-on lifetime: 35146 hours (1464 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 64 00 00 e0 Error: UNC at LBA = 0x00000064 = 100
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 64 00 00 e0 00 03:07:49.433 READ SECTOR(S)
33 00 01 64 00 00 e0 00 03:07:49.424 WRITE LONG (w/o retry) [OBS-4]
ea 00 01 00 00 00 a0 00 03:07:49.415 FLUSH CACHE EXT
ea 00 01 00 00 00 a0 00 03:09:53.588 FLUSH CACHE EXT
ec 00 01 00 00 00 40 00 03:09:36.625 IDENTIFY DEVICE
Error 8 occurred at disk power-on lifetime: 35144 hours (1464 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 de d4 42 e0 Error: UNC at LBA = 0x0042d4de = 4379870
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d8 d4 42 e0 00 01:16:48.000 READ DMA
e5 00 00 00 00 00 00 00 01:16:47.938 CHECK POWER MODE
27 00 00 00 00 00 e0 00 01:16:47.936 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 01:16:44.988 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:16:44.930 SET FEATURES [Set transfer mode]
Error 7 occurred at disk power-on lifetime: 35144 hours (1464 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 de d4 42 e0 Error: UNC at LBA = 0x0042d4de = 4379870
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d8 d4 42 e0 00 01:16:41.744 READ DMA
27 00 00 00 00 00 e0 00 01:16:38.819 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 01:16:38.819 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:16:44.988 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:16:44.930 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short captive Completed: read failure 90% 35147 4379870
# 2 Extended captive Completed: read failure 90% 35147 4379870
# 3 Conveyance captive Completed: read failure 90% 35147 4379870
# 4 Conveyance offline Completed: read failure 90% 35147 4379870
# 5 Extended offline Completed: read failure 90% 35147 4379870
# 6 Short offline Completed: read failure 90% 35147 4379870
# 7 Selective offline Completed: read failure 90% 35147 4379870
# 8 Selective offline Completed: read failure 90% 35147 4379870
# 9 Selective offline Completed: read failure 90% 35147 4379870
#10 Extended offline Completed: read failure 90% 35146 4379870
#11 Extended offline Completed: read failure 90% 35146 4379870
#12 Selective offline Completed: read failure 90% 35146 4379870
#13 Selective offline Completed: read failure 90% 35146 4379870
#14 Selective offline Completed: read failure 90% 35146 4379870
#15 Short offline Completed: read failure 90% 35146 4379870
#16 Extended offline Completed: read failure 90% 35146 4379870
#17 Short offline Completed: read failure 90% 35146 4379870
#18 Short offline Completed without error 00% 35143 -
#19 Short offline Aborted by host 80% 35133 -
#20 Extended offline Completed: read failure 90% 35121 4379870
#21 Extended offline Completed: read failure 90% 35121 4379870
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 10 Not_testing
2 5 15 Not_testing
3 10 20 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
mimoun@mimoun:~$ sudo smartctl -a /dev/sdcsudo smartctl -a /dev/sdc
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
ERROR: smartctl takes ONE device name as the final command-line argument.
You have provided 3 device names:
/dev/sdcsudo
smartctl
/dev/sdc
Use smartctl -h to get a usage summary
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$
sudo mount /dev/sda /mnt
mimoun@mimoun:~$
mimoun@mimoun:~$
mimoun@mimoun:~$ sudo mount /dev/sda /mnt
mount: /mnt: Falscher Dateisystemtyp, ungültige Optionen, der Superblock von /dev/sda ist beschädigt, fehlende Kodierungsseite oder ein anderer Fehler.
mimoun@mimoun:~$
mimoun@mimoun:~$