Hallo,
ich hoffe mir kann einer mal den Schubs in die richtige Richtung geben. Stehe grade etwas auf dem Schlauch :/
Problem ist, dass ich mich nicht ins mobile Internet verbinden kann. Unter Windows kein Problem. Seit dem ich Kubuntu nutze, bekomme ich nach dem Verbindungsversuch die Meldung: "die Verbindung zu Netzclub wurde deaktiviert"
Dem Syslog kann ich folgendes entnehmen:
ModemManager[984]: <info> Simple connect started... ModemManager[984]: <info> Simple connect state (4/8): Wait to get fully enabled ModemManager[984]: <info> Simple connect state (5/8): Register NetworkManager[1251]: <warn> (ttyACM1) failed to connect modem: Network timeout NetworkManager[1251]: <info> (ttyACM1): device state change: prepare -> failed (reason 'gsm-registration-timeout') [40 120 32] NetworkManager[1251]: <info> Marking connection 'Netzclub' invalid. NetworkManager[1251]: <warn> Activation (ttyACM1) failed for connection 'Netzclub' NetworkManager[1251]: <info> (ttyACM1): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[1251]: <info> (ttyACM1): deactivating device (reason 'none') [0]
lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02) Subsystem: Toshiba America Info Systems Device [1179:0001] Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) Subsystem: Toshiba America Info Systems Device [1179:0002] Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06) Subsystem: Toshiba America Info Systems Device [1179:0001] Kernel driver in use: mei_me 00:19.0 Ethernet controller [0200]: Intel Corporation 82577LC Gigabit Network Connection [8086:10eb] (rev 06) Subsystem: Toshiba America Info Systems Device [1179:0001] Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) Subsystem: Toshiba America Info Systems Device [1179:0001] Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06) Subsystem: Toshiba America Info Systems Device [1179:0001] Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06) Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 06) Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) Subsystem: Toshiba America Info Systems Device [1179:0001] Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 06) Subsystem: Toshiba America Info Systems Device [1179:0001] Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 06) Subsystem: Toshiba America Info Systems Device [1179:0001] Kernel driver in use: ahci 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06) Subsystem: Toshiba America Info Systems Device [1179:0001] Kernel driver in use: intel ips 01:00.0 SD Host controller [0805]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 01) Subsystem: Toshiba America Info Systems Device [1179:0001] Kernel driver in use: sdhci-pci 01:00.1 System peripheral [0880]: Ricoh Co Ltd R5U2xx (R5U230 / R5U231 / R5U241) [Memory Stick Host Controller] [1180:e230] (rev 01) Subsystem: Toshiba America Info Systems Device [1179:0001] 02:00.0 Network controller [0280]: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) Subsystem: Askey Computer Corp. Device [144f:7156] Kernel driver in use: ath9k ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02) Subsystem: Intel Corporation Device [8086:8086] ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02) Subsystem: Intel Corporation Device [8086:8086] ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02) Subsystem: Intel Corporation Device [8086:8086] ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02) Subsystem: Intel Corporation Device [8086:8086] ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02) Subsystem: Intel Corporation Device [8086:8086] ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02) Subsystem: Intel Corporation Device [8086:8086]
lsusb
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 0930:0508 Toshiba Corp. Integrated Bluetooth HCI Bus 001 Device 005: ID 0930:1311 Toshiba Corp. F3607gw v2 Mobile Broadband Module Bus 001 Device 004: ID 04f2:b130 Chicony Electronics Co., Ltd Bus 001 Device 003: ID 08ff:168b AuthenTec, Inc. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.13 S: Manufacturer=Linux 3.13.0-45-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1a.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 6 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0020 Rev=00.00 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=08ff ProdID=168b Rev=25.01 S: Product=Fingerprint Sensor C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04f2 ProdID=b130 Rev=77.30 S: Manufacturer=Chicony S: Product=USB2.0 UVC WebCam S: SerialNumber=CNA8155-000001 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo I: If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo T: Bus=01 Lev=02 Prnt=02 Port=04 Cnt=03 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 2 P: Vendor=0930 ProdID=1311 Rev=00.00 S: Manufacturer=0 F3607gw S: Product=F3607gw S: SerialNumber=3564000305809320 C: #Ifs=11 Cfg#= 1 Atr=e0 MxPwr=20mA I: If#= 0 Alt= 0 #EPs= 0 Cls=02(commc) Sub=08 Prot=00 Driver=(none) I: If#= 1 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm /usr/bin/usb-devices: Zeile 79: printf: a: Ungültige Zahl. I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm I: If#= 2 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm I: If#= 4 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm I: If#= 5 Alt= 0 #EPs= 1 Cls=02(commc) Sub=09 Prot=01 Driver=cdc_wdm I: If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0a Prot=00 Driver=cdc_ether I: If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#= 8 Alt= 0 #EPs= 1 Cls=02(commc) Sub=09 Prot=01 Driver=cdc_wdm I: If#= 9 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=04 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0930 ProdID=0508 Rev=52.76 S: Manufacturer=TAIYO YUDEN S: Product=EYSNJCSAX-A C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.13 S: Manufacturer=Linux 3.13.0-45-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 8 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0020 Rev=00.00 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 127.0.1.1 search fritz.box
ifconfig
eth0 Link encap:Ethernet Hardware Adresse 00:yy:18:xx71:fd inet Adresse:192.168.178.20 Bcast:192.168.178.255 Maske:255.255.255.0 inet6-Adresse: fe80::223:18ff:feb7:71fd/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX-Pakete:6289933 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:3427107 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:7903932426 (7.9 GB) TX-Bytes:250551740 (250.5 MB) Interrupt:20 Speicher:d4600000-d4620000 lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:65536 Metrik:1 RX-Pakete:49548 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:49548 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX-Bytes:6589440 (6.5 MB) TX-Bytes:6589440 (6.5 MB) wlan0 Link encap:Ethernet Hardware Adresse 00:xx:b6:xx:f8:9a inet6-Adresse: fe80::226:b6ff:xxxx:f89a/64 Gültigkeitsbereich:Verbindung UP BROADCAST MULTICAST MTU:1500 Metrik:1 RX-Pakete:214382 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:42825 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:127217644 (127.2 MB) TX-Bytes:3880620 (3.8 MB)
NetworManager.state
[main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true
demsg
g [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13) [ 0.000000] Command line: auto BOOT_IMAGE=Linux ro root=/dev/mapper/Defcon--vg-root quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b70cffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b70d0000-0x00000000b70d01ff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b70d0200-0x00000000b70d1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b70d2000-0x00000000b71cffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b71d0000-0x00000000b71effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b71f0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: TOSHIBA TECRA A11/Portable PC, BIOS Version 2.90 12/03/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFE00000 mask FFFE00000 uncachable [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable [ 0.000000] 4 base 100000000 mask FC0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 4094MB, range: 2MB, type UC [ 0.000000] reg 1, base: 0GB, range: 2GB, type WB [ 0.000000] reg 2, base: 2GB, range: 1GB, type WB [ 0.000000] reg 3, base: 2944MB, range: 128MB, type UC [ 0.000000] reg 4, base: 4GB, range: 1GB, type WB [ 0.000000] total RAM covered: 3968M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 2944MB, range: 128MB, type UC [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB [ 0.000000] e820: update [mem 0xb8000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xb70d0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff] [ 0.000000] [mem 0x137e00000-0x137ffffff] page 2M [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x134000000-0x137dfffff] [ 0.000000] [mem 0x134000000-0x137dfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x133ffffff] [ 0.000000] [mem 0x100000000-0x133ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xb70cffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xb6ffffff] page 2M [ 0.000000] [mem 0xb7000000-0xb70cffff] page 4k [ 0.000000] RAMDISK: [mem 0x7e3fb000-0x7fffffff] [ 0.000000] ACPI: RSDP 00000000000f0030 000014 (v00 TOSHIB) [ 0.000000] ACPI: RSDT 00000000b71ef038 000050 (v01 TOSHIB A0076 00000002 01000013) [ 0.000000] ACPI: FACP 00000000b71ee000 000081 (v02 TOSHIB A0076 00000002 LOHR 0000005F) [ 0.000000] ACPI: DSDT 00000000b71dc000 009C26 (v02 TOSHIB A0076 20101203 INTL 20061109) [ 0.000000] ACPI: FACS 00000000b715a000 000040 [ 0.000000] ACPI: HPET 00000000b71ed000 000038 (v01 TOSHIB A0076 00000001 LOHR 0000005F) [ 0.000000] ACPI: APIC 00000000b71ec000 0000BC (v01 TOSHIB A0076 00000001 LOHR 0000005F) [ 0.000000] ACPI: MCFG 00000000b71eb000 00003C (v01 TOSHIB A0076 00000001 LOHR 0000005F) [ 0.000000] ACPI: TCPA 00000000b71e9000 000032 (v02 TOSHIB A0076 00000000 LOHR 0000005F) [ 0.000000] ACPI: BOOT 00000000b71e8000 000028 (v01 TOSHIB A0076 00000000 LOHR 0000005F) [ 0.000000] ACPI: SLIC 00000000b71e7000 000176 (v01 TOSHIB A0076 00000000 LOHR 0000005F) [ 0.000000] ACPI: SSDT 00000000b71db000 0002A2 (v01 TOSHIB SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000b71d8000 00072A (v01 TOSHIB PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000b71ea000 0000A0 (v32 TOSHIB A0076 00000001 LOHR 0000005F) [ 0.000000] ACPI: SSDT 00000000b71d7000 000A10 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x137ffffff] [ 0.000000] NODE_DATA [mem 0x137ff8000-0x137ffcfff] [ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133a00000-ffff8801375fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x137ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xb70cffff] [ 0.000000] node 0: [mem 0x100000000-0x137ffffff] [ 0.000000] On node 0 totalpages: 979053 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11652 pages used for memmap [ 0.000000] DMA32 zone: 745680 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 229376 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb70d0000-0xb70d0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb70d1000-0xb70d1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb70d2000-0xb71cffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb71d0000-0xb71effff] [ 0.000000] PM: Registered nosave memory: [mem 0xb71f0000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s82368 r8192 d24128 u262144 [ 0.000000] pcpu-alloc: s82368 r8192 d24128 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 963732 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=/dev/mapper/Defcon--vg-root quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3742480K/3916212K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 173732K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 15728640 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2660.036 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.07 BogoMIPS (lpj=10640144) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000034] Security Framework initialized [ 0.000057] AppArmor: AppArmor initialized [ 0.000058] Yama: becoming mindful. [ 0.000338] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001641] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002225] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002231] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002460] Initializing cgroup subsys memory [ 0.002467] Initializing cgroup subsys devices [ 0.002469] Initializing cgroup subsys freezer [ 0.002471] Initializing cgroup subsys blkio [ 0.002472] Initializing cgroup subsys perf_event [ 0.002474] Initializing cgroup subsys hugetlb [ 0.002495] CPU: Physical Processor ID: 0 [ 0.002496] CPU: Processor Core ID: 0 [ 0.002502] mce: CPU supports 9 MCE banks [ 0.002510] CPU0: Thermal monitoring handled by SMI [ 0.002521] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.002521] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.002521] tlb_flushall_shift: 6 [ 0.002623] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.003755] ACPI: Core revision 20131115 [ 0.008569] ACPI: All ACPI Tables successfully acquired [ 0.009635] ftrace: allocating 28554 entries in 112 pages [ 0.023671] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063362] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz (fam: 06, model: 25, stepping: 05) [ 0.171157] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver. [ 0.171164] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.171166] ... version: 3 [ 0.171167] ... bit width: 48 [ 0.171168] ... generic registers: 4 [ 0.171169] ... value mask: 0000ffffffffffff [ 0.171170] ... max period: 000000007fffffff [ 0.171170] ... fixed-purpose events: 3 [ 0.171171] ... event mask: 000000070000000f [ 0.172736] x86: Booting SMP configuration: [ 0.183789] CPU1: Thermal monitoring handled by SMI [ 0.186003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.197146] CPU2: Thermal monitoring handled by SMI [ 0.210405] CPU3: Thermal monitoring handled by SMI [ 0.172737] .... node #0, CPUs: #1 #2 #3 [ 0.212531] x86: Booted up 1 node, 4 CPUs [ 0.212535] smpboot: Total of 4 processors activated (21280.28 BogoMIPS) [ 0.214939] devtmpfs: initialized [ 0.216896] EVM: security.selinux [ 0.216897] EVM: security.SMACK64 [ 0.216898] EVM: security.ima [ 0.216899] EVM: security.capability [ 0.216941] PM: Registering ACPI NVS region [mem 0xb70d0000-0xb70d01ff] (512 bytes) [ 0.216942] PM: Registering ACPI NVS region [mem 0xb70d2000-0xb71cffff] (1040384 bytes) [ 0.217753] pinctrl core: initialized pinctrl subsystem [ 0.217809] regulator-dummy: no parameters [ 0.217841] RTC time: 13:19:34, date: 02/12/15 [ 0.217873] NET: Registered protocol family 16 [ 0.217964] cpuidle: using governor ladder [ 0.217966] cpuidle: using governor menu [ 0.217994] ACPI: bus type PCI registered [ 0.217996] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.218056] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.218058] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.231048] PCI: Using configuration type 1 for base access [ 0.231813] bio: create slab <bio-0> at 0 [ 0.231953] ACPI: Added _OSI(Module Device) [ 0.231954] ACPI: Added _OSI(Processor Device) [ 0.231955] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.231957] ACPI: Added _OSI(Processor Aggregator Device) [ 0.234056] ACPI: Executed 1 blocks of module-level executable AML code [ 0.235208] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.237224] ACPI: SSDT 00000000b77f8a18 00049D (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.237464] ACPI: Dynamic OEM Table Load: [ 0.237466] ACPI: SSDT (null) 00049D (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.237567] ACPI: SSDT 00000000b77f6018 0008B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.237792] ACPI: Dynamic OEM Table Load: [ 0.237794] ACPI: SSDT (null) 0008B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.243420] ACPI: SSDT 00000000b77f7a98 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.243696] ACPI: Dynamic OEM Table Load: [ 0.243697] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.247291] ACPI: SSDT 00000000b77fac18 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.247538] ACPI: Dynamic OEM Table Load: [ 0.247540] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.251659] ACPI: Interpreter enabled [ 0.251665] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.251669] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.251681] ACPI: (supports S0 S3 S4 S5) [ 0.251683] ACPI: Using IOAPIC for interrupt routing [ 0.251704] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.251970] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.261089] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.261095] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.261099] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.261658] PCI host bridge to bus 0000:00 [ 0.261660] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.261662] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.261663] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.261665] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.261666] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.261668] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.261669] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.261670] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff] [ 0.261678] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000 [ 0.261695] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 0.261763] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000 [ 0.261773] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.261778] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.261782] pci 0000:00:02.0: reg 0x20: [io 0x3050-0x3057] [ 0.261891] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.261920] pci 0000:00:16.0: reg 0x10: [mem 0xd4627000-0xd462700f 64bit] [ 0.262015] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.262103] pci 0000:00:19.0: [8086:10eb] type 00 class 0x020000 [ 0.262128] pci 0000:00:19.0: reg 0x10: [mem 0xd4600000-0xd461ffff] [ 0.262138] pci 0000:00:19.0: reg 0x14: [mem 0xd4625000-0xd4625fff] [ 0.262150] pci 0000:00:19.0: reg 0x18: [io 0x3020-0x303f] [ 0.262238] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.262300] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.262338] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.262363] pci 0000:00:1a.0: reg 0x10: [mem 0xd4626c00-0xd4626fff] [ 0.262470] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.262519] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.262554] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.262574] pci 0000:00:1b.0: reg 0x10: [mem 0xd4620000-0xd4623fff 64bit] [ 0.262671] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.262722] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.262750] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.262848] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.262926] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.263024] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.263075] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.263105] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400 [ 0.263202] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.263256] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.263295] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.263320] pci 0000:00:1d.0: reg 0x10: [mem 0xd4626800-0xd4626bff] [ 0.263428] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.263476] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.263504] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.263632] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100 [ 0.263804] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601 [ 0.263830] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.263841] pci 0000:00:1f.2: reg 0x14: [io 0x305c-0x305f] [ 0.263852] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.263862] pci 0000:00:1f.2: reg 0x1c: [io 0x3058-0x305b] [ 0.263873] pci 0000:00:1f.2: reg 0x20: [io 0x3000-0x301f] [ 0.263883] pci 0000:00:1f.2: reg 0x24: [mem 0xd4626000-0xd46267ff] [ 0.263949] pci 0000:00:1f.2: PME# supported from D3hot [ 0.264030] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000 [ 0.264057] pci 0000:00:1f.6: reg 0x10: [mem 0xd4624000-0xd4624fff 64bit] [ 0.264324] pci 0000:01:00.0: [1180:e822] type 00 class 0x080500 [ 0.264341] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. [ 0.264353] pci 0000:01:00.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.264354] pci 0000:01:00.0: MMC cards are now supported by standard SDHCI controller [ 0.264374] pci 0000:01:00.0: reg 0x10: [mem 0xd4500200-0xd45002ff] [ 0.264534] pci 0000:01:00.0: supports D1 D2 [ 0.264535] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.264639] pci 0000:01:00.1: [1180:e230] type 00 class 0x088000 [ 0.264662] pci 0000:01:00.1: reg 0x10: [mem 0xd4500100-0xd45001ff] [ 0.264822] pci 0000:01:00.1: supports D1 D2 [ 0.264823] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.273958] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.273970] pci 0000:00:1c.0: bridge window [mem 0xd4500000-0xd45fffff] [ 0.274077] pci 0000:02:00.0: [168c:002a] type 00 class 0x028000 [ 0.274099] pci 0000:02:00.0: reg 0x10: [mem 0xd4400000-0xd440ffff 64bit] [ 0.274213] pci 0000:02:00.0: supports D1 [ 0.274215] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.274247] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.274267] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.274276] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.274283] pci 0000:00:1c.1: bridge window [mem 0xd4400000-0xd44fffff] [ 0.274362] acpiphp: Slot [1] registered [ 0.274369] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.274373] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.274378] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd43fffff] [ 0.274385] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd23fffff 64bit pref] [ 0.274468] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.274480] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.274482] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.274483] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.274485] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.274486] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.274488] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.274489] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode) [ 0.274803] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.274848] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15) [ 0.274891] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.274934] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.274977] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 *6 7 10 12 14 15) [ 0.275020] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.275063] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.275106] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.275253] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff]) [ 0.275257] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.275260] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.275293] PCI host bridge to bus 0000:ff [ 0.275296] pci_bus 0000:ff: root bus resource [bus ff] [ 0.275300] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000 [ 0.275332] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000 [ 0.275367] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000 [ 0.275397] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000 [ 0.275426] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000 [ 0.275455] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000 [ 0.275732] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.275738] ACPI: \_SB_.PCI0: notify handler is installed [ 0.275775] ACPI: \_SB_.CPBG: notify handler is installed [ 0.275785] Found 2 acpi root devices [ 0.275922] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.275925] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.275929] vgaarb: loaded [ 0.275931] vgaarb: bridge control possible 0000:00:02.0 [ 0.276160] SCSI subsystem initialized [ 0.276210] libata version 3.00 loaded. [ 0.276236] ACPI: bus type USB registered [ 0.276255] usbcore: registered new interface driver usbfs [ 0.276265] usbcore: registered new interface driver hub [ 0.276290] usbcore: registered new device driver usb [ 0.276394] PCI: Using ACPI for IRQ routing [ 0.286101] PCI: pci_cache_line_size set to 64 bytes [ 0.286222] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.286224] e820: reserve RAM buffer [mem 0xb70d0000-0xb7ffffff] [ 0.286310] NetLabel: Initializing [ 0.286312] NetLabel: domain hash size = 128 [ 0.286312] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.286325] NetLabel: unlabeled traffic allowed by default [ 0.286393] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.286398] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.288434] Switched to clocksource hpet [ 0.292816] AppArmor: AppArmor Filesystem Enabled [ 0.292848] pnp: PnP ACPI init [ 0.292864] ACPI: bus type PNP registered [ 0.293069] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.293071] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.293073] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.293076] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.293078] system 00:00: [mem 0xd4700000-0xd4700fff] has been reserved [ 0.293079] system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved [ 0.293081] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.293083] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.293084] system 00:00: [mem 0xff000000-0xffffffff] could not be reserved [ 0.293086] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.293090] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293308] pnp 00:01: [dma 4] [ 0.293331] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.293382] pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.293465] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.293468] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.293503] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.293539] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.293540] system 00:05: [io 0x1010-0x1013] has been reserved [ 0.293542] system 00:05: [io 0xffff] has been reserved [ 0.293545] system 00:05: [io 0x0400-0x047f] could not be reserved [ 0.293546] system 00:05: [io 0x0500-0x053f] has been reserved [ 0.293548] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293581] system 00:06: [io 0x0680-0x06ff] has been reserved [ 0.293583] system 00:06: [io 0x01e0-0x01e7] has been reserved [ 0.293585] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293613] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.293798] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.293837] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.293862] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.293953] pnp: PnP ACPI: found 11 devices [ 0.293954] ACPI: bus type PNP unregistered [ 0.300584] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.300588] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.300598] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.300600] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.300620] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.300622] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.300624] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.300625] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.300630] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd4800000-0xd49fffff 64bit pref] [ 0.300632] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4a00000-0xd4bfffff 64bit pref] [ 0.300635] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.300636] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff] [ 0.300639] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.300643] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.300648] pci 0000:00:1c.0: bridge window [mem 0xd4500000-0xd45fffff] [ 0.300653] pci 0000:00:1c.0: bridge window [mem 0xd4800000-0xd49fffff 64bit pref] [ 0.300660] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.300663] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 0.300668] pci 0000:00:1c.1: bridge window [mem 0xd4400000-0xd44fffff] [ 0.300673] pci 0000:00:1c.1: bridge window [mem 0xd4a00000-0xd4bfffff 64bit pref] [ 0.300680] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.300683] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.300688] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd43fffff] [ 0.300693] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd23fffff 64bit pref] [ 0.300700] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.300714] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.300716] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.300717] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.300718] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.300720] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.300721] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 0.300723] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfeafffff] [ 0.300725] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.300726] pci_bus 0000:01: resource 1 [mem 0xd4500000-0xd45fffff] [ 0.300727] pci_bus 0000:01: resource 2 [mem 0xd4800000-0xd49fffff 64bit pref] [ 0.300729] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.300731] pci_bus 0000:02: resource 1 [mem 0xd4400000-0xd44fffff] [ 0.300732] pci_bus 0000:02: resource 2 [mem 0xd4a00000-0xd4bfffff 64bit pref] [ 0.300734] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.300735] pci_bus 0000:03: resource 1 [mem 0xd2400000-0xd43fffff] [ 0.300736] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd23fffff 64bit pref] [ 0.300738] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.300740] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.300741] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.300743] pci_bus 0000:05: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.300744] pci_bus 0000:05: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.300745] pci_bus 0000:05: resource 9 [mem 0x000dc000-0x000dffff] [ 0.300747] pci_bus 0000:05: resource 10 [mem 0xc0000000-0xfeafffff] [ 0.300780] NET: Registered protocol family 2 [ 0.300966] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.301077] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.301223] TCP: Hash tables configured (established 32768 bind 32768) [ 0.301251] TCP: reno registered [ 0.301257] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.301279] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.301351] NET: Registered protocol family 1 [ 0.301364] pci 0000:00:02.0: Video device with shadowed ROM [ 0.301911] PCI: CLS 64 bytes, default 64 [ 0.301965] Trying to unpack rootfs image as initramfs... [ 0.718678] Freeing initrd memory: 28692K (ffff88007e3fb000 - ffff880080000000) [ 0.718685] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.718687] software IO TLB [mem 0xb30d0000-0xb70d0000] (64MB) mapped at [ffff8800b30d0000-ffff8800b70cffff] [ 0.718765] Simple Boot Flag at 0x7c set to 0x1 [ 0.718943] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2 [ 0.718949] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2 [ 0.718952] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2 [ 0.718958] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2 [ 0.719024] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.719025] Scanning for low memory corruption every 60 seconds [ 0.719315] Initialise system trusted keyring [ 0.719358] audit: initializing netlink socket (disabled) [ 0.719369] type=2000 audit(1423747174.612:1): initialized [ 0.741932] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.742837] zbud: loaded [ 0.742983] VFS: Disk quotas dquot_6.5.2 [ 0.743016] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.743407] fuse init (API version 7.22) [ 0.743473] msgmni has been set to 7365 [ 0.743524] Key type big_key registered [ 0.744077] Key type asymmetric registered [ 0.744079] Asymmetric key parser 'x509' registered [ 0.744106] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.744149] io scheduler noop registered [ 0.744150] io scheduler deadline registered (default) [ 0.744171] io scheduler cfq registered [ 0.744802] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.744814] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.744852] intel_idle: MWAIT substates: 0x1120 [ 0.744853] intel_idle: v0.4 model 0x25 [ 0.744855] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.744951] ipmi message handler version 39.2 [ 0.745001] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.745039] ACPI: AC Adapter [ADP1] (on-line) [ 0.745110] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.745116] ACPI: Power Button [PWRB] [ 0.745142] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.745157] ACPI: Lid Switch [LID] [ 0.745183] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.745185] ACPI: Power Button [PWRF] [ 0.745487] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.745489] ACPI: Thermal Zone [TZ01] (46 C) [ 0.745509] GHES: HEST is not enabled! [ 0.745597] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.745817] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.745822] ACPI: Battery Slot [BAT1] (battery present) [ 0.766288] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.767776] Linux agpgart interface v0.103 [ 0.767825] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset [ 0.767869] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.768435] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.768609] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 0.768735] tpm_tis 00:02: 1.2 TPM (device-id 0xB, rev-id 16) [ 0.900598] tpm_tis 00:02: Adjusting TPM timeout parameters. [ 1.692702] tpm_tis 00:02: TPM is disabled/deactivated (0x7) [ 1.695373] brd: module loaded [ 1.696094] loop: module loaded [ 1.696394] libphy: Fixed MDIO Bus: probed [ 1.696459] tun: Universal TUN/TAP device driver, 1.6 [ 1.696460] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.696508] PPP generic driver version 2.4.2 [ 1.696549] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.696553] ehci-pci: EHCI PCI platform driver [ 1.696732] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.696738] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.696754] ehci-pci 0000:00:1a.0: debug port 2 [ 1.700677] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.700696] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4626c00 [ 1.712589] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.712630] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.712632] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.712633] usb usb1: Product: EHCI Host Controller [ 1.712635] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd [ 1.712636] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.712770] hub 1-0:1.0: USB hub found [ 1.712776] hub 1-0:1.0: 2 ports detected [ 1.712958] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.712962] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.712975] ehci-pci 0000:00:1d.0: debug port 2 [ 1.716883] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.716885] tsc: Refined TSC clocksource calibration: 2659.998 MHz [ 1.716898] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4626800 [ 1.728591] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.728638] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.728640] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.728641] usb usb2: Product: EHCI Host Controller [ 1.728643] usb usb2: Manufacturer: Linux 3.13.0-45-generic ehci_hcd [ 1.728647] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.728746] hub 2-0:1.0: USB hub found [ 1.728754] hub 2-0:1.0: 2 ports detected [ 1.728813] ehci-platform: EHCI generic platform driver [ 1.728819] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.728820] ohci-pci: OHCI PCI platform driver [ 1.728826] ohci-platform: OHCI generic platform driver [ 1.728830] uhci_hcd: USB Universal Host Controller Interface driver [ 1.728872] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.730235] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.730240] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.730367] mousedev: PS/2 mouse device common for all mice [ 1.730551] rtc_cmos 00:07: RTC can wake from S4 [ 1.730697] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.730728] rtc_cmos 00:07: alarms up to one year, 242 bytes nvram, hpet irqs [ 1.730780] device-mapper: uevent: version 1.0.3 [ 1.730858] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.730865] ledtrig-cpu: registered to indicate activity on CPUs [ 1.730952] TCP: cubic registered [ 1.731017] NET: Registered protocol family 10 [ 1.731157] NET: Registered protocol family 17 [ 1.731165] Key type dns_resolver registered [ 1.731438] Loading compiled-in X.509 certificates [ 1.732211] Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a' [ 1.732227] registered taskstats version 1 [ 1.734608] Key type trusted registered [ 1.736684] Key type encrypted registered [ 1.739186] AppArmor: AppArmor sha1 policy hashing enabled [ 1.741366] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.784712] tpm_tis 00:02: A TPM error (7) occurred attempting to read a pcr value [ 1.784716] IMA: No TPM chip found, activating TPM-bypass! [ 1.785105] regulator-dummy: disabling [ 1.785457] Magic number: 3:525:331 [ 1.785498] tty tty52: hash matches [ 1.785659] rtc_cmos 00:07: setting system clock to 2015-02-12 13:19:36 UTC (1423747176) [ 1.786526] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.786528] EDD information not available. [ 1.786563] PM: Hibernation image not present or could not be loaded. [ 1.787721] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) [ 1.787723] Write protecting the kernel read-only data: 12288k [ 1.789508] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000) [ 1.790921] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000) [ 1.805589] systemd-udevd[124]: starting version 204 [ 1.826729] pps_core: LinuxPPS API ver. 1 registered [ 1.826734] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.827838] sdhci: Secure Digital Host Controller Interface driver [ 1.827840] sdhci: Copyright(c) Pierre Ossman [ 1.828451] PTP clock support registered [ 1.829740] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 1) [ 1.829959] sdhci-pci 0000:01:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.829966] sdhci-pci 0000:01:00.0: dummy supplies not allowed [ 1.829967] mmc0: no vqmmc regulator found [ 1.829969] sdhci-pci 0000:01:00.0: dummy supplies not allowed [ 1.829971] mmc0: no vmmc regulator found [ 1.830076] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA [ 1.831377] ahci 0000:00:1f.2: version 3.0 [ 1.831614] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 1.831658] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.831701] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode [ 1.831704] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.832886] [drm] Initialized drm 1.1.0 20060810 [ 1.835115] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.835118] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.848390] scsi0 : ahci [ 1.848570] scsi1 : ahci [ 1.849351] scsi2 : ahci [ 1.849427] scsi3 : ahci [ 1.849524] scsi4 : ahci [ 1.849591] scsi5 : ahci [ 1.849638] ata1: SATA max UDMA/133 abar m2048@0xd4626000 port 0xd4626100 irq 40 [ 1.849642] ata2: SATA max UDMA/133 abar m2048@0xd4626000 port 0xd4626180 irq 40 [ 1.849644] ata3: DUMMY [ 1.849646] ata4: DUMMY [ 1.849647] ata5: DUMMY [ 1.849650] ata6: SATA max UDMA/133 abar m2048@0xd4626000 port 0xd4626380 irq 40 [ 1.850010] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.850039] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 2.024811] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.076914] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:23:18:b7:71:fd [ 2.076917] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.076967] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: FFFFFF-0FF [ 2.077669] [drm] Memory usable by graphics device = 2048M [ 2.116779] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 2.116794] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.116797] [drm] Driver supports precise vblank timestamp query. [ 2.116869] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.161468] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 2.161474] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.161936] hub 1-1:1.0: USB hub found [ 2.162150] hub 1-1:1.0: 6 ports detected [ 2.168709] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.169509] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 2.169519] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff880131d8a848), AE_NOT_FOUND (20131115/psparse-536) [ 2.169542] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 2.169544] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880131d8a870), AE_NOT_FOUND (20131115/psparse-536) [ 2.170026] ata1.00: ATA-8: Hitachi HTS725032A9A360, PC3OC71E, max UDMA/133 [ 2.170032] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.171034] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 2.171043] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff880131d8a848), AE_NOT_FOUND (20131115/psparse-536) [ 2.171076] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 2.171079] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880131d8a870), AE_NOT_FOUND (20131115/psparse-536) [ 2.171545] ata1.00: configured for UDMA/133 [ 2.171857] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72503 PC3O PQ: 0 ANSI: 5 [ 2.172079] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.172090] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.172187] sd 0:0:0:0: [sda] Write Protect is off [ 2.172190] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.172314] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.172651] [drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 2.201275] sda: sda1 sda2 < sda5 > [ 2.201663] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.219370] fbcon: inteldrmfb (fb0) is primary device [ 2.272767] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.405149] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 2.405151] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.405658] hub 2-1:1.0: USB hub found [ 2.405888] hub 2-1:1.0: 8 ports detected [ 2.476964] usb 1-1.2: new full-speed USB device number 3 using ehci-pci [ 2.488766] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.493717] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 2.493723] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT1._SDD] (Node ffff880131d8a960), AE_NOT_FOUND (20131115/psparse-536) [ 2.493743] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 2.493746] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT1._GTF] (Node ffff880131d8a988), AE_NOT_FOUND (20131115/psparse-536) [ 2.493749] ata2.00: ATAPI: TEAC DV-W28S-VT, 7.5A, max UDMA/100 [ 2.499607] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 2.499613] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT1._SDD] (Node ffff880131d8a960), AE_NOT_FOUND (20131115/psparse-536) [ 2.499636] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 2.499639] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT1._GTF] (Node ffff880131d8a988), AE_NOT_FOUND (20131115/psparse-536) [ 2.499642] ata2.00: configured for UDMA/100 [ 2.504380] scsi 1:0:0:0: CD-ROM TEAC DV-W28S-VT 7.5A PQ: 0 ANSI: 5 [ 2.508394] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.508396] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.508671] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.508730] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.571663] usb 1-1.2: New USB device found, idVendor=08ff, idProduct=168b [ 2.571666] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.571669] usb 1-1.2: Product: Fingerprint Sensor [ 2.644987] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 2.716963] Switched to clocksource tsc [ 2.743170] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b130 [ 2.743173] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.743175] usb 1-1.4: Product: USB2.0 UVC WebCam [ 2.743178] usb 1-1.4: Manufacturer: Chicony [ 2.743180] usb 1-1.4: SerialNumber: CNA8155-000001 [ 2.790009] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input7 [ 2.806236] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 [ 2.812941] usb 1-1.5: new high-speed USB device number 5 using ehci-pci [ 2.828816] ata6: SATA link down (SStatus 0 SControl 300) [ 2.908726] usb 1-1.5: New USB device found, idVendor=0930, idProduct=1311 [ 2.908730] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.908732] usb 1-1.5: Product: F3607gw [ 2.908734] usb 1-1.5: Manufacturer: 0 F3607gw [ 2.908736] usb 1-1.5: SerialNumber: 3564000305809320 [ 3.267284] Console: switching to colour frame buffer device 170x48 [ 3.269695] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.269697] i915 0000:00:02.0: registered panic notifier [ 3.269794] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) [ 3.272902] acpi device:09: registered as cooling_device4 [ 3.272973] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8 [ 3.273062] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.253525] random: nonblocking pool is initialized [ 15.521371] bio: create slab <bio-1> at 1 [ 15.687809] bio: create slab <bio-1> at 1 [ 21.395680] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 21.395683] EXT4-fs (dm-1): write access will be enabled during recovery [ 23.311631] EXT4-fs (dm-1): orphan cleanup on readonly fs [ 23.311700] EXT4-fs (dm-1): 1 orphan inode deleted [ 23.311702] EXT4-fs (dm-1): recovery complete [ 23.382135] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 32.353214] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.422490] systemd-udevd[428]: starting version 204 [ 32.561879] lp: driver loaded but no devices found [ 32.566180] ppdev: user-space parallel port driver [ 32.588359] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [ 32.597998] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler [ 32.605732] toshiba_bluetooth: Re-enabling Toshiba Bluetooth [ 32.612322] wmi: Mapper loaded [ 32.623323] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19 [ 32.623419] input: Toshiba input device as /devices/virtual/input/input9 [ 32.685143] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 32.685152] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 32.685156] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 32.685160] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 32.685161] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 32.685169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 32.685183] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 32.685190] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 32.685192] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 32.703887] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29) [ 32.711623] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90 [ 32.721949] cfg80211: Calling CRDA to update world regulatory domain [ 32.758843] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 32.812231] type=1400 audit(1423747207.521:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=476 comm="apparmor_parser" [ 32.812240] type=1400 audit(1423747207.521:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=476 comm="apparmor_parser" [ 32.812245] type=1400 audit(1423747207.521:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=476 comm="apparmor_parser" [ 32.812747] type=1400 audit(1423747207.521:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=476 comm="apparmor_parser" [ 32.812756] type=1400 audit(1423747207.521:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=476 comm="apparmor_parser" [ 32.813412] type=1400 audit(1423747207.521:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=476 comm="apparmor_parser" [ 32.878521] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 32.901350] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 32.901355] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 32.901356] hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 32.901357] mono: mono_out=0x0 [ 32.901358] inputs: [ 32.901360] Internal Mic=0x19 [ 32.901362] Mic=0x18 [ 32.901363] realtek: No valid SSID, checking pincfg 0x4015822d for NID 0x1d [ 32.901365] realtek: Enabling init ASM_ID=0x822d CODEC_ID=10ec0268 [ 32.926475] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 32.926563] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 32.926636] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 33.135745] usb 1-1.6: new full-speed USB device number 6 using ehci-pci [ 33.239472] ath: EEPROM regdomain: 0x6a [ 33.239477] ath: EEPROM indicates we should expect a direct regpair map [ 33.239480] ath: Country alpha2 being used: 00 [ 33.239481] ath: Regpair used: 0x6a [ 33.249110] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 33.249427] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90010d20000, irq=17 [ 33.577942] cfg80211: World regulatory domain updated: [ 33.577947] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 33.577948] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.577950] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.577951] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 33.577952] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.577953] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.650002] cdc_wdm 1-1.5:1.5: cdc-wdm0: USB WDM device [ 33.650090] cdc_wdm 1-1.5:1.8: cdc-wdm1: USB WDM device [ 33.650114] usbcore: registered new interface driver cdc_wdm [ 33.650189] cdc_acm 1-1.5:1.1: ttyACM0: USB ACM device [ 33.650350] Linux video capture interface: v2.00 [ 33.655561] cdc_acm 1-1.5:1.3: ttyACM1: USB ACM device [ 33.657742] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b130) [ 33.678391] cdc_acm 1-1.5:1.9: ttyACM2: USB ACM device [ 33.680254] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13 [ 33.680433] usbcore: registered new interface driver uvcvideo [ 33.680435] USB Video Class driver (1.1.1) [ 33.687170] usbcore: registered new interface driver cdc_acm [ 33.687175] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 33.698160] cdc_ether 1-1.5:1.6 wwan0: register 'cdc_ether' at usb-0000:00:1a.0-1.5, Mobile Broadband Network Device, 02:80:37:ec:02:00 [ 33.698191] usbcore: registered new interface driver cdc_ether [ 34.076532] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 34.241900] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0508 [ 34.241906] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 34.241910] usb 1-1.6: Product: EYSNJCSAX-A [ 34.241913] usb 1-1.6: Manufacturer: TAIYO YUDEN [ 34.250653] Bluetooth: Core ver 2.17 [ 34.250680] NET: Registered protocol family 31 [ 34.250682] Bluetooth: HCI device and connection manager initialized [ 34.250693] Bluetooth: HCI socket layer initialized [ 34.250695] Bluetooth: L2CAP socket layer initialized [ 34.250700] Bluetooth: SCO socket layer initialized [ 34.253001] usbcore: registered new interface driver btusb [ 34.587284] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 34.762176] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 35.127439] init: failsafe main process (821) killed by TERM signal [ 35.682707] type=1400 audit(1423747210.389:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=994 comm="apparmor_parser" [ 35.682716] type=1400 audit(1423747210.389:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=994 comm="apparmor_parser" [ 35.683066] type=1400 audit(1423747210.389:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=994 comm="apparmor_parser" [ 35.749262] type=1400 audit(1423747210.457:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1005 comm="apparmor_parser" [ 36.205279] Bluetooth: RFCOMM TTY layer initialized [ 36.205303] Bluetooth: RFCOMM socket layer initialized [ 36.205313] Bluetooth: RFCOMM ver 1.11 [ 36.267564] init: cups main process (995) killed by HUP signal [ 36.267571] init: cups main process ended, respawning [ 36.342402] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 36.342407] Bluetooth: BNEP filters: protocol multicast [ 36.342419] Bluetooth: BNEP socket layer initialized