|
Anmeldungsdatum: Beiträge: 96 Wohnort: Berlin |
Hallo zusammen, hab meinem Schwiegervater einen Brix von Gigabyte zusammengebaut und Ubuntu draufgepackt, läuft wie hulle, alles super. Nur der USB-Brenner (Samsung SE-218GN/RSBD extern slim DVD+RW) wird nicht angezeigt, was kann man da machen? Moderiert von redknight: Es gibt eine ganze Menge, was man machen kann. Schritt 1 wäre, im richtigen Forum zu fragen, denn dein Brenner hat vermutlich keine der Funktionen "Drucken, Scannen, Faxen". Verschoben. |
|
Supporter
Anmeldungsdatum: Beiträge: 55426 Wohnort: Berlin |
Wenn das Gerät mit einem Y-Kabel kommt - was die USB-Spezifikation nicht vorsieht - achte darauf, dass beide angeschlossen sind und möglichst nicht am selben USB-Controller. Außerdem wären die Terminal-Ausgaben von lsusb und dmesg mit angestecktem DVD-Brenner hier im Codeblock gepostet äußerst interessant. |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 96 Wohnort: Berlin |
Hallo tomtomtom, der Brenner geht von Mini-USB auf USB 2.0, also kein Y-Kabel. Nachfolgend die beiden Ausgaben (Im Brenner liegt keine CD...), hoffe dir sagt das etwas: lsusb: erich@erich:~$ lsusb Bus 002 Device 003: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 8087:0a2a Intel Corp. Bus 001 Device 006: ID 040b:2000 Weltrend Semiconductor Bus 001 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg: [ 2.052887] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.053331] sd 2:0:0:0: [sdb] Write Protect is off [ 2.053339] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.053516] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.053803] ata3.00: Enabling discard_zeroes_data [ 2.054789] sdb: sdb1 sdb2 < sdb5 > [ 2.055430] ata3.00: Enabling discard_zeroes_data [ 2.055820] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.103563] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 2.218616] usb 1-4: New USB device found, idVendor=040b, idProduct=2000 [ 2.218622] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.218626] usb 1-4: Product: USB Keyboard [ 2.218629] usb 1-4: Manufacturer: Generic [ 2.218854] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.218907] usb 1-4: ep 0x82 - rounding interval to 256 microframes, ep desc says 384 microframes [ 2.227006] e1000e 0000:00:1f.6 eth0: registered PHC clock [ 2.227013] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 40:8d:5c:a2:52:21 [ 2.227017] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 2.227055] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 2.386941] usb 1-7: new full-speed USB device number 4 using xhci_hcd [ 2.543274] clocksource: Switched to clocksource tsc [ 2.574216] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a [ 2.574223] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.647414] random: init urandom read with 54 bits of entropy available [ 2.666590] init: plymouth-upstart-bridge main process (193) terminated with status 1 [ 2.666597] init: plymouth-upstart-bridge main process ended, respawning [ 2.671340] init: plymouth-upstart-bridge main process (203) terminated with status 1 [ 2.671348] init: plymouth-upstart-bridge main process ended, respawning [ 2.675228] init: plymouth-upstart-bridge main process (206) terminated with status 1 [ 2.675239] init: plymouth-upstart-bridge main process ended, respawning [ 2.736904] Adding 16689148k swap on /dev/sdb5. Priority:-1 extents:1 across:16689148k SSFS [ 2.740160] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 2.803594] scsi 3:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6 [ 2.803924] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2.807359] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.807557] sd 3:0:0:0: [sdc] Write Protect is off [ 2.807562] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 2.808460] systemd-udevd[350]: starting version 204 [ 2.811846] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.824889] random: nonblocking pool is initialized [ 2.862656] lp: driver loaded but no devices found [ 2.871296] [drm] Initialized drm 1.1.0 20060810 [ 2.884392] wmi: Mapper loaded [ 2.885669] ppdev: user-space parallel port driver [ 2.890778] parport0: PC-style at 0x378 (0x778) [ 2.901277] hidraw: raw HID events driver (C) Jiri Kosina [ 2.905280] [drm] Memory usable by graphics device = 4096M [ 2.905286] checking generic (c0000000 7f0000) vs hw (c0000000 10000000) [ 2.905288] fb: switching to inteldrmfb from VESA VGA [ 2.905318] Console: switching to colour dummy device 80x25 [ 2.906965] [drm] Replacing VGA console driver [ 2.920166] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.920170] [drm] Driver supports precise vblank timestamp query. [ 2.932566] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.960286] AVX2 version of gcm_enc/dec engaged. [ 2.960289] AES CTR mode by8 optimization enabled [ 2.982087] Bluetooth: Core ver 2.20 [ 2.982195] NET: Registered protocol family 31 [ 2.982197] Bluetooth: HCI device and connection manager initialized [ 2.982201] Bluetooth: HCI socket layer initialized [ 2.982205] Bluetooth: L2CAP socket layer initialized [ 2.982564] Bluetooth: SCO socket layer initialized [ 2.992293] [drm] failed to retrieve link info, disabling eDP [ 2.998399] usbcore: registered new interface driver btusb [ 3.011223] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.011516] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 3.019209] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0 [ 3.019249] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.019353] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.039605] Bluetooth: hci0: read Intel version: 370810011003110e04 [ 3.039608] Bluetooth: hci0: Intel device is already patched. patch num: 04 [ 3.043873] fbcon: inteldrmfb (fb0) is primary device [ 3.043995] Console: switching to colour frame buffer device 240x67 [ 3.044035] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.044037] i915 0000:00:02.0: registered panic notifier [ 3.084528] audit: type=1400 audit(1460304039.897:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=557 comm="apparmor_parser" [ 3.084536] audit: type=1400 audit(1460304039.897:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=557 comm="apparmor_parser" [ 3.084541] audit: type=1400 audit(1460304039.897:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser" [ 3.085024] audit: type=1400 audit(1460304039.897:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=557 comm="apparmor_parser" [ 3.085030] audit: type=1400 audit(1460304039.897:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser" [ 3.085285] audit: type=1400 audit(1460304039.897:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser" [ 3.108262] Intel(R) Wireless WiFi driver for Linux [ 3.108265] Copyright(c) 2003- 2015 Intel Corporation [ 3.114048] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-15.ucode failed with error -2 [ 3.114073] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-14.ucode failed with error -2 [ 3.114487] iwlwifi 0000:01:00.0: Unsupported splx structure [ 3.124309] intel_rapl: Found RAPL domain package [ 3.124313] intel_rapl: Found RAPL domain core [ 3.124315] intel_rapl: Found RAPL domain uncore [ 3.124319] intel_rapl: Found RAPL domain dram [ 3.128814] iwlwifi 0000:01:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm [ 3.133647] usbcore: registered new interface driver usbhid [ 3.133650] usbhid: USB HID core driver [ 3.149134] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.149137] Bluetooth: BNEP filters: protocol multicast [ 3.149141] Bluetooth: BNEP socket layer initialized [ 3.155210] Bluetooth: RFCOMM TTY layer initialized [ 3.155216] Bluetooth: RFCOMM socket layer initialized [ 3.155220] Bluetooth: RFCOMM ver 1.11 [ 3.163505] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210 [ 3.163739] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled [ 3.163904] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled [ 3.182943] sdc: sdc1 [ 3.184025] sd 3:0:0:0: [sdc] Attached SCSI disk [ 3.202131] audit: type=1400 audit(1460304040.017:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=657 comm="apparmor_parser" [ 3.202139] audit: type=1400 audit(1460304040.017:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=657 comm="apparmor_parser" [ 3.202596] audit: type=1400 audit(1460304040.017:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=657 comm="apparmor_parser" [ 3.248109] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 3.250725] cfg80211: World regulatory domain updated: [ 3.250732] cfg80211: DFS Master region: unset [ 3.250737] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3.250740] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3.250742] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3.250744] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3.250745] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3.250747] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 3.250839] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:093A:2510.0001/input/input4 [ 3.254229] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-3/input0 [ 3.254475] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:040B:2000.0002/input/input5 [ 3.281516] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.306585] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp [ 3.306590] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.306592] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.306594] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.306596] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.306598] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1b [ 3.310176] hid-generic 0003:040B:2000.0002: input,hidraw1: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-0000:00:14.0-4/input0 [ 3.310336] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:040B:2000.0003/input/input6 [ 3.310698] [PCSPP,TRISTATE,EPP] [ 3.310704] parport0: irq 0 detected [ 3.321117] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 [ 3.366190] hid-generic 0003:040B:2000.0003: input,hidraw2: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-0000:00:14.0-4/input1 [ 3.366507] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 [ 3.366582] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 3.366659] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 3.366747] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 3.405897] lp0: using parport0 (polling). [ 3.436925] init: failsafe main process (730) killed by TERM signal [ 3.437953] init: samba-ad-dc main process (769) terminated with status 1 [ 3.563363] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled [ 3.563654] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled [ 3.572500] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 3.572510] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 3.572513] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 3.572516] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 3.625050] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled [ 3.625216] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled [ 3.632795] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 3.632807] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 3.632811] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 3.632814] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 3.637886] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3.837520] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.873578] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 3.873599] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 3.873608] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 3.873614] pcieport 0000:00:1c.0: [ 0] Receiver Error [ 4.052636] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 4.057761] vboxdrv: Found 4 processor cores. [ 4.063859] vboxdrv: fAsync=0 offMin=0x226 offMax=0x229e [ 4.064011] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 4.064014] vboxdrv: Successfully loaded version 4.3.36_Ubuntu (interface 0x001a000b). [ 4.085886] vboxpci: IOMMU not found (not registered) [ 4.407897] init: plymouth-upstart-bridge main process ended, respawning [ 4.420903] init: plymouth-upstart-bridge main process (1280) terminated with status 1 [ 4.420938] init: plymouth-upstart-bridge main process ended, respawning [ 4.792563] [drm] RC6 on [ 5.343771] ahci 0000:00:17.0: port does not support device sleep [ 7.139380] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 7.139388] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 7.139391] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 7.139393] pcieport 0000:00:1c.0: [ 0] Receiver Error [ 27.749862] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 27.749905] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 27.749916] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 27.749924] pcieport 0000:00:1c.0: [ 0] Receiver Error [ 59.937755] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 59.937787] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 59.937802] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 59.937813] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 60.946868] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 60.946894] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 60.946904] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 60.946913] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 102.895787] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 102.895811] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 102.895822] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 102.895830] pcieport 0000:00:1c.0: [ 0] Receiver Error [ 103.790253] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 103.790280] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 103.790293] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 103.790302] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 156.736333] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 156.736367] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 156.736385] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 156.736400] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 221.846654] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 221.846680] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 221.846690] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 221.846699] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 282.383103] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 282.383128] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 282.383139] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 282.383150] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 344.656143] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 344.656168] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 344.656179] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 344.656187] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 345.207847] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 345.207873] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 345.207884] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 345.207893] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 533.465344] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 533.465376] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 533.465391] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 533.465403] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 536.529653] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 536.529678] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 536.529688] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 536.529697] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 596.957322] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 596.957354] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 596.957368] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 596.957380] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 659.340059] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 659.340091] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 659.340106] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 659.340118] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 722.279532] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 722.279556] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 722.279567] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 722.279575] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 785.213912] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 785.213936] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 785.213960] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 785.213968] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 911.088100] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 911.088125] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 911.088136] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 911.088144] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 911.639824] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 911.639853] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 911.639864] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 911.639875] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 921.849657] usb 1-4: USB disconnect, device number 3 [ 922.928797] usb 1-4: new low-speed USB device number 5 using xhci_hcd [ 923.120377] usb 1-4: New USB device found, idVendor=040b, idProduct=2000 [ 923.120390] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 923.120398] usb 1-4: Product: USB Keyboard [ 923.120403] usb 1-4: Manufacturer: Generic [ 923.120939] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 923.120958] usb 1-4: ep 0x82 - rounding interval to 256 microframes, ep desc says 384 microframes [ 923.125966] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:040B:2000.0004/input/input12 [ 923.181538] hid-generic 0003:040B:2000.0004: input,hidraw1: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-0000:00:14.0-4/input0 [ 923.188077] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:040B:2000.0005/input/input13 [ 923.241381] hid-generic 0003:040B:2000.0005: input,hidraw2: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-0000:00:14.0-4/input1 [ 955.003055] ------------[ cut here ]------------ [ 955.003128] WARNING: CPU: 2 PID: 0 at /build/linux-lts-wily-H6pWeh/linux-lts-wily-4.2.0/drivers/gpu/drm/i915/intel_display.c:11104 intel_check_page_flip+0x100/0x110 [i915]() [ 955.003132] Kicking stuck page flip: queued at 18866, now 18870 [ 955.003135] Modules linked in: pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) input_leds snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm hid_generic arc4 cmac snd_seq_midi snd_seq_midi_event snd_rawmidi iwlmvm rfcomm bnep mac80211 intel_rapl x86_pkg_temp_thermal intel_powerclamp usbhid snd_seq coretemp kvm_intel iwlwifi kvm cfg80211 crct10dif_pclmul snd_seq_device crc32_pclmul snd_timer btusb btrtl btbcm btintel bluetooth aesni_intel aes_x86_64 lrw gf128mul snd glue_helper ablk_helper cryptd soundcore mei_me mei shpchp i2c_hid hid i915 pinctrl_sunrisepoint pinctrl_intel intel_lpss_acpi parport_pc intel_lpss wmi ppdev video drm_kms_helper mac_hid acpi_pad drm acpi_als kfifo_buf i2c_algo_bit lp parport industrialio uas usb_storage e1000e ptp pps_core ahci libahci [ 955.003238] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G OE 4.2.0-35-generic #40~14.04.1-Ubuntu [ 955.003241] Hardware name: GIGABYTE GB-BSi3-6100/MKLP3AP-00, BIOS F3 10/20/2015 [ 955.003245] 0000000000000000 ffff880473d03d38 ffffffff817bcbf8 ffff880473d03d88 [ 955.003251] ffffffffc029aca8 ffff880473d03d78 ffffffff81079b5a 0000000000000001 [ 955.003256] ffff88008604c800 ffff88045e692000 ffff88008604c9a8 0000000000000000 [ 955.003262] Call Trace: [ 955.003265] <IRQ> [<ffffffff817bcbf8>] dump_stack+0x63/0x81 [ 955.003283] [<ffffffff81079b5a>] warn_slowpath_common+0x8a/0xc0 [ 955.003290] [<ffffffff81079bd6>] warn_slowpath_fmt+0x46/0x50 [ 955.003344] [<ffffffffc02407d0>] intel_check_page_flip+0x100/0x110 [i915] [ 955.003391] [<ffffffffc0209764>] gen8_irq_handler+0x354/0x540 [i915] [ 955.003398] [<ffffffff810d1084>] handle_irq_event_percpu+0x44/0x1d0 [ 955.003405] [<ffffffff810d1259>] handle_irq_event+0x49/0x70 [ 955.003411] [<ffffffff810d43bd>] handle_edge_irq+0x9d/0x150 [ 955.003417] [<ffffffff81018285>] handle_irq+0x25/0x40 [ 955.003424] [<ffffffff817c6cb1>] do_IRQ+0x51/0xe0 [ 955.003430] [<ffffffff817c4c2b>] common_interrupt+0x6b/0x6b [ 955.003432] <EOI> [<ffffffff8165c6a8>] ? cpuidle_enter_state+0xd8/0x250 [ 955.003445] [<ffffffff8165c684>] ? cpuidle_enter_state+0xb4/0x250 [ 955.003450] [<ffffffff8165c857>] cpuidle_enter+0x17/0x20 [ 955.003455] [<ffffffff810ba5fb>] call_cpuidle+0x3b/0x70 [ 955.003461] [<ffffffff8165c833>] ? cpuidle_select+0x13/0x20 [ 955.003465] [<ffffffff810ba8d7>] cpu_startup_entry+0x2a7/0x370 [ 955.003474] [<ffffffff8104c485>] start_secondary+0x175/0x1a0 [ 955.003478] ---[ end trace 1f2692ee25162ab4 ]--- [ 974.920451] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 974.920465] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 974.920469] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 974.920472] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 1031.405686] usb 1-4: USB disconnect, device number 5 [ 1031.788180] usb 1-4: new low-speed USB device number 6 using xhci_hcd [ 1031.979981] usb 1-4: New USB device found, idVendor=040b, idProduct=2000 [ 1031.979994] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1031.980002] usb 1-4: Product: USB Keyboard [ 1031.980008] usb 1-4: Manufacturer: Generic [ 1031.980558] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1031.980581] usb 1-4: ep 0x82 - rounding interval to 256 microframes, ep desc says 384 microframes [ 1031.985309] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:040B:2000.0006/input/input14 [ 1032.041043] hid-generic 0003:040B:2000.0006: input,hidraw1: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-0000:00:14.0-4/input0 [ 1032.047607] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:040B:2000.0007/input/input15 [ 1032.100896] hid-generic 0003:040B:2000.0007: input,hidraw2: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-0000:00:14.0-4/input1 [ 1036.963392] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 1036.963430] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1036.963448] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 1036.963462] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 1044.002053] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 1044.002159] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1099.881235] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 1099.881267] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1099.881282] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 1099.881293] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 1142.459934] usb 2-1: USB disconnect, device number 2 [ 1142.461261] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 1142.461367] sd 3:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 1162.784271] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 1162.784301] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1162.784315] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 1162.784326] pcieport 0000:00:1c.0: [ 0] Receiver Error [ 1225.692668] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 1225.692700] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1225.692716] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 1225.692728] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 1226.587113] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: id=00e0 [ 1226.587145] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1226.587158] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 1226.587170] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 1352.740077] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 1352.740102] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1352.740114] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 1352.740128] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 1414.407625] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 1414.407664] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1414.407684] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 1414.407699] pcieport 0000:00:1c.0: [ 0] Receiver Error [ 1477.314307] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 1477.314322] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1477.314331] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 1477.314337] pcieport 0000:00:1c.0: [ 0] Receiver Error [ 1480.378792] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 1480.378828] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1480.378846] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 1480.378860] pcieport 0000:00:1c.0: [ 0] Receiver Error [ 1540.222876] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 1540.222907] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1540.222922] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 1540.222933] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) [ 1541.231763] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0 [ 1541.231790] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID) [ 1541.231801] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00000001/00002000 [ 1541.231809] pcieport 0000:00:1c.0: [ 0] Receiver Error (First) |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 96 Wohnort: Berlin |
Der USB-Brenner funktioniert und wird erkannt, habe es mit einer CD probiert und sie wurde eingelesen, lsusb hat ihn danach auch angezeigt. Ich habe aber ein Problem mit dem einen USB-Port, der erkennt den Brenner nicht und auch den USB-Stick nicht... kann sein das ich da zu oft raus und reingesteckt habe.. der funktionierte nämlich gestern noch. Was kann man da machen? |
|
Anmeldungsdatum: Beiträge: 29240 Wohnort: Germany |
Hier ist die Fehlermeldung gelistet: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1521173. Vielleicht findest du da irgendwann eine Lösung oder Hinweise in den Kommentaren. Ansonsten natürlich die andre USB-Buchse beibehalten, die funktioniert. Möglicherweise helfen irgendwelche Bootoptionen, aber damit würde ich bei gefundener Lösung keine Zeit verschwenden. |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 96 Wohnort: Berlin |
Irgendwie funktioniert der Port mal ab und an mit einer externen Festplatte, nur ein spezieller USB-Stick wird gar nicht mehr erkannt auf diesem Port... ich werde mich um dieses Thema jedoch nicht mehr bemühen, ist abgehakt. 😳 😛 🙄 |
