Vielleicht helfen die Ausgaben von journalctl -xep err und dmsg ja weiter?
journalctl -xep err
Sep 03 14:25:11 kurt-Lenovo-M30-70 kernel: usb 2-2: unable to read config index
Sep 03 14:25:11 kurt-Lenovo-M30-70 kernel: usb 2-2: can't read configurations, e
Sep 03 14:30:53 kurt-Lenovo-M30-70 kernel: usb 2-2: device not accepting address
Sep 03 17:46:07 kurt-Lenovo-M30-70 gdm3[931]: GLib: g_variant_new_string: assert
Sep 03 17:46:07 kurt-Lenovo-M30-70 gdm3[931]: GLib: g_variant_new_string: assert
Sep 03 17:46:07 kurt-Lenovo-M30-70 gdm3[931]: GLib: g_hash_table_find: assertion
-- Reboot --
Sep 03 17:46:16 kurt-Lenovo-M30-70 bluetoothd[859]: Loading LTKs timed out for h
Sep 03 17:46:18 kurt-Lenovo-M30-70 wpa_supplicant[850]: dbus: wpa_dbus_get_objec
Sep 03 17:46:18 kurt-Lenovo-M30-70 wpa_supplicant[850]: dbus: Failed to construc
Sep 03 17:46:28 kurt-Lenovo-M30-70 spice-vdagent[1181]: Cannot access vdagent vi
Sep 03 17:46:42 kurt-Lenovo-M30-70 spice-vdagent[1616]: Cannot access vdagent vi
Sep 03 17:46:42 kurt-Lenovo-M30-70 pulseaudio[1623]: [pulseaudio] backend-ofono.
Sep 04 07:58:36 kurt-Lenovo-M30-70 systemd-rfkill[13119]: Failed to open device
Sep 04 08:21:02 kurt-Lenovo-M30-70 systemd-rfkill[13714]: Failed to open device
Sep 04 08:21:18 kurt-Lenovo-M30-70 gdm3[941]: GLib: g_variant_new_string: assert
Sep 04 08:21:18 kurt-Lenovo-M30-70 gdm3[941]: GLib: g_hash_table_find: assertion
-- Reboot --
Sep 04 08:21:40 kurt-Lenovo-M30-70 wpa_supplicant[864]: dbus: wpa_dbus_get_objec
Sep 04 08:21:40 kurt-Lenovo-M30-70 wpa_supplicant[864]: dbus: Failed to construc
Sep 04 08:22:07 kurt-Lenovo-M30-70 spice-vdagent[1191]: Cannot access vdagent vi
Sep 04 08:22:33 kurt-Lenovo-M30-70 spice-vdagent[1632]: Cannot access vdagent vi
Sep 04 08:22:34 kurt-Lenovo-M30-70 pulseaudio[1638]: [pulseaudio] backend-ofono.
dmesg
[ 0.000000] Linux version 4.15.0-60-generic (buildd@lgw01-amd64-007) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #67-Ubuntu SMP Thu Aug 22 17:00:47 UTC 2019 (Ubuntu 4.15.0-60.67-generic 4.15.18)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007c51ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c520000-0x000000007d91ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007d920000-0x000000009cabefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009cabf000-0x000000009cebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 80H8/INVALID, BIOS 8BCN46WW(V3.09) 12/03/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect
[ 0.000000] 5 base 0100000000 mask 7F80000000 write-back
[ 0.000000] 6 base 015F600000 mask 7FFFE00000 uncachable
[ 0.000000] 7 base 015F800000 mask 7FFF800000 uncachable
[ 0.000000] 8 base 0160000000 mask 7FE0000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1b3fffff]
[ 0.000000] BRK [0x1afde000, 0x1afdefff] PGTABLE
[ 0.000000] BRK [0x1afdf000, 0x1afdffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33801000-0x35bf7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009CFF7000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000009CFE5000 00E131 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000009CFBA000 000040
[ 0.000000] ACPI: SLIC 0x000000009CFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000009CFFA000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x000000009CFF9000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000009CFF6000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000009CFF5000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000009CFF4000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFE4000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x000000009CFE2000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000009CFE1000 00005C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x000000009CFDF000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFDE000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD8000 0004D6 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD7000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD3000 00351F (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x000000009CFD1000 0000B0 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4736MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] BRK [0x1afe0000, 0x1afe0fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000375fdfff]
[ 0.000000] HighMem [mem 0x00000000375fe000-0x000000015f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007c51ffff]
[ 0.000000] node 0: [mem 0x000000007d920000-0x000000009cabefff]
[ 0.000000] node 0: [mem 0x000000009cfff000-0x000000009cffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000015f5fffff]
[ 0.000000] Reserved but unavailable: 100 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000015f5fffff]
[ 0.000000] On node 0 totalpages: 1027164
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] Normal zone: 2175 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 800450 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at 0x000000009da00000-0x000000009f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c520000-0x7d91ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cabf000-0x9cebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x81/0x433 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 30 pages/cpu s93132 r0 d29748 u122880
[ 0.000000] pcpu-alloc: s93132 r0 d29748 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1024949
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-60-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2019-02-26
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0015f600)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 3946828K/4108656K available (8940K kernel code, 894K rwdata, 3440K rodata, 1108K init, 844K bss, 161828K reserved, 0K cma-reserved, 3201800K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xdad11000 - 0xdae26000 (1108 kB)
.data : 0xda8bb3f0 - 0xdacfdac0 (4361 kB)
.text : 0xda000000 - 0xda8bb3f0 (8940 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ************************************************************
[ 0.000000] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
[ 0.000000] ** **
[ 0.000000] ** You are using 32-bit PTI on a 64-bit PCID-capable CPU. **
[ 0.000000] ** Your performance will increase dramatically if you **
[ 0.000000] ** switch to a 64-bit kernel! **
[ 0.000000] ** **
[ 0.000000] ** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
[ 0.000000] ************************************************************
[ 0.000000] ftrace: allocating 38001 entries in 75 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 2304, nr_irqs: 760, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 1895.608 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3791.21 BogoMIPS (lpj=7582432)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024000] CPU0: Thermal monitoring enabled (TM1)
[ 0.024000] process: using mwait in idle threads
[ 0.024000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.024000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.024000] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.024000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.024000] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.024000] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.024000] MDS: Mitigation: Clear CPU buffers
[ 0.024000] Freeing SMP alternatives memory: 36K
[ 0.029690] TSC deadline timer enabled
[ 0.029693] smpboot: CPU0: Intel(R) Core(TM) i3-4030U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ 0.029769] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.029818] ... version: 3
[ 0.029819] ... bit width: 48
[ 0.029819] ... generic registers: 4
[ 0.029820] ... value mask: 0000ffffffffffff
[ 0.029821] ... max period: 00007fffffffffff
[ 0.029822] ... fixed-purpose events: 3
[ 0.029823] ... event mask: 000000070000000f
[ 0.029864] Hierarchical SRCU implementation.
[ 0.031246] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.031268] smp: Bringing up secondary CPUs ...
[ 0.031368] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.031369] x86: Booting SMP configuration:
[ 0.031370] .... node #0, CPUs: #1
[ 0.004000] Initializing CPU#1
[ 0.032000] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.032000] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.032000] #2
[ 0.004000] Initializing CPU#2
[ 0.034092] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.034092] #3
[ 0.004000] Initializing CPU#3
[ 0.034092] smp: Brought up 1 node, 4 CPUs
[ 0.034092] smpboot: Max logical packages: 2
[ 0.034092] smpboot: Total of 4 processors activated (15164.86 BogoMIPS)
[ 0.036564] allocated 4194304 bytes of page_ext
[ 0.036610] devtmpfs: initialized
[ 0.036610] evm: security.selinux
[ 0.036610] evm: security.SMACK64
[ 0.036610] evm: security.SMACK64EXEC
[ 0.036610] evm: security.SMACK64TRANSMUTE
[ 0.036610] evm: security.SMACK64MMAP
[ 0.036610] evm: security.apparmor
[ 0.036610] evm: security.ima
[ 0.036610] evm: security.capability
[ 0.036610] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[ 0.036610] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.036610] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.036610] pinctrl core: initialized pinctrl subsystem
[ 0.036610] RTC time: 15:20:42, date: 05/28/15
[ 0.036610] NET: Registered protocol family 16
[ 0.036610] audit: initializing netlink subsys (disabled)
[ 0.036610] audit: type=2000 audit(1432826442.036:1): state=initialized audit_enabled=0 res=1
[ 0.036610] EISA bus registered
[ 0.036610] cpuidle: using governor ladder
[ 0.036610] cpuidle: using governor menu
[ 0.036610] Simple Boot Flag at 0x44 set to 0x1
[ 0.036610] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.036610] ACPI: bus type PCI registered
[ 0.036610] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.036610] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.036610] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.036610] PCI: Using MMCONFIG for extended config space
[ 0.036610] PCI: Using configuration type 1 for base access
[ 0.036610] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.036610] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.036610] mtrr: probably your BIOS does not setup all CPUs.
[ 0.036610] mtrr: corrected configuration.
[ 0.037580] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.040117] ACPI: Added _OSI(Module Device)
[ 0.040118] ACPI: Added _OSI(Processor Device)
[ 0.040119] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.040120] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.040122] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.040123] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.040125] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.040393] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.047774] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.048707] ACPI: Dynamic OEM Table Load:
[ 0.048717] ACPI: SSDT 0x00000000ED469C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.049225] ACPI: Dynamic OEM Table Load:
[ 0.049234] ACPI: SSDT 0x00000000EE00C000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.049769] ACPI: Dynamic OEM Table Load:
[ 0.049776] ACPI: SSDT 0x00000000ED40A400 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.050996] ACPI: EC: EC started
[ 0.050997] ACPI: EC: interrupt blocked
[ 0.328028] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.328031] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.328033] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.328033] ACPI: Interpreter enabled
[ 0.328077] ACPI: (supports S0 S3 S4 S5)
[ 0.328078] ACPI: Using IOAPIC for interrupt routing
[ 0.328112] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.328608] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.423306] ACPI: Power Resource [FN00] (off)
[ 0.423397] ACPI: Power Resource [FN01] (off)
[ 0.423487] ACPI: Power Resource [FN02] (off)
[ 0.423576] ACPI: Power Resource [FN03] (off)
[ 0.423665] ACPI: Power Resource [FN04] (off)
[ 0.424726] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.424732] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.425331] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.425332] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.425962] PCI host bridge to bus 0000:00
[ 0.425965] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.425967] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.425968] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.425970] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.425972] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.425982] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.426159] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.426174] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
[ 0.426181] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.426187] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.426349] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.426362] pci 0000:00:03.0: reg 0x10: [mem 0xb0610000-0xb0613fff 64bit]
[ 0.426550] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.426570] pci 0000:00:14.0: reg 0x10: [mem 0xb0600000-0xb060ffff 64bit]
[ 0.426629] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.426775] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.426798] pci 0000:00:16.0: reg 0x10: [mem 0xb0618000-0xb061801f 64bit]
[ 0.426868] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.427018] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.427038] pci 0000:00:1b.0: reg 0x10: [mem 0xb0614000-0xb0617fff 64bit]
[ 0.427107] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.427253] pci 0000:00:1c.0: [8086:9c12] type 01 class 0x060400
[ 0.427328] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.427526] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.427601] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.427799] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.427821] pci 0000:00:1d.0: reg 0x10: [mem 0xb061c000-0xb061c3ff]
[ 0.427907] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.428062] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.428321] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.428337] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.428344] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.428351] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.428358] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.428365] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.428372] pci 0000:00:1f.2: reg 0x24: [mem 0xb061b000-0xb061b7ff]
[ 0.428407] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.428545] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.428562] pci 0000:00:1f.3: reg 0x10: [mem 0xb0619000-0xb06190ff 64bit]
[ 0.428582] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.428799] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[ 0.428831] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.428860] pci 0000:01:00.0: reg 0x18: [mem 0xb0504000-0xb0504fff 64bit]
[ 0.428878] pci 0000:01:00.0: reg 0x20: [mem 0xb0500000-0xb0503fff 64bit]
[ 0.428982] pci 0000:01:00.0: supports D1 D2
[ 0.428983] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.440044] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.440047] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.440051] pci 0000:00:1c.0: bridge window [mem 0xb0500000-0xb05fffff]
[ 0.440131] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[ 0.440184] pci 0000:02:00.0: reg 0x10: [mem 0xb0400000-0xb047ffff 64bit]
[ 0.440263] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.440378] pci 0000:02:00.0: supports D1 D2
[ 0.440380] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.452030] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.452035] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb04fffff]
[ 0.452050] pci_bus 0000:00: on NUMA node 0
[ 0.536599] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.536658] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.536715] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.536770] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.536825] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.536880] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.536936] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.536990] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.537432] ACPI: EC: interrupt unblocked
[ 0.537440] ACPI: EC: event unblocked
[ 0.537460] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.537462] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.537747] SCSI subsystem initialized
[ 0.537766] libata version 3.00 loaded.
[ 0.537766] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.537766] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.537766] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.537766] vgaarb: loaded
[ 0.537766] ACPI: bus type USB registered
[ 0.537766] usbcore: registered new interface driver usbfs
[ 0.537766] usbcore: registered new interface driver hub
[ 0.537766] usbcore: registered new device driver usb
[ 0.537766] EDAC MC: Ver: 3.0.0
[ 0.537766] PCI: Using ACPI for IRQ routing
[ 0.540051] PCI: pci_cache_line_size set to 64 bytes
[ 0.540093] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.540095] e820: reserve RAM buffer [mem 0x7c520000-0x7fffffff]
[ 0.540096] e820: reserve RAM buffer [mem 0x9cabf000-0x9fffffff]
[ 0.540098] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.540099] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
[ 0.540214] NetLabel: Initializing
[ 0.540215] NetLabel: domain hash size = 128
[ 0.540216] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.540233] NetLabel: unlabeled traffic allowed by default
[ 0.544645] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.544652] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.546677] clocksource: Switched to clocksource hpet
[ 0.558799] VFS: Disk quotas dquot_6.6.0
[ 0.558821] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.558937] AppArmor: AppArmor Filesystem Enabled
[ 0.558968] pnp: PnP ACPI init
[ 0.559152] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.559155] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 0.559156] system 00:00: [io 0xffff] has been reserved
[ 0.559158] system 00:00: [io 0xffff] has been reserved
[ 0.559160] system 00:00: [io 0xffff] has been reserved
[ 0.559161] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.559163] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.559169] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.559219] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.559276] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.559280] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.559304] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.559356] pnp 00:04: Plug and Play ACPI device, IDs SYN2b26 SYN0700 SYN0002 PNP0f13 (active)
[ 0.640188] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.640191] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.640192] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.640194] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.640196] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.640198] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.640200] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.640201] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 0.640203] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.640205] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.640207] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.640209] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.640213] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.640549] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.641047] pnp: PnP ACPI: found 7 devices
[ 0.641050] PnPBIOS: Disabled by ACPI PNP
[ 0.677730] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.677748] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.677768] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.677770] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.677775] pci 0000:00:1c.0: bridge window [mem 0xb0500000-0xb05fffff]
[ 0.677785] pci 0000:02:00.0: BAR 6: assigned [mem 0xb0480000-0xb048ffff pref]
[ 0.677787] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.677792] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb04fffff]
[ 0.677800] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.677802] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.677803] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.677805] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[ 0.677806] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.677808] pci_bus 0000:01: resource 1 [mem 0xb0500000-0xb05fffff]
[ 0.677810] pci_bus 0000:02: resource 1 [mem 0xb0400000-0xb04fffff]
[ 0.677970] NET: Registered protocol family 2
[ 0.678141] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.678152] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.678166] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.678191] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.678196] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.678238] NET: Registered protocol family 1
[ 0.678252] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.696150] PCI: CLS 64 bytes, default 64
[ 0.696196] Unpacking initramfs...
[ 1.524728] Freeing initrd memory: 36828K
[ 1.524791] DMAR: Host address width 39
[ 1.524794] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 1.524809] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 1.524811] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 1.524818] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 1.524819] DMAR: RMRR base: 0x0000009ce10000 end: 0x0000009ce2ffff
[ 1.524820] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff
[ 1.524835] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.524836] software IO TLB: mapped [mem 0x2e841000-0x32841000] (64MB)
[ 1.525136] Scanning for low memory corruption every 60 seconds
[ 1.525943] Initialise system trusted keyrings
[ 1.525955] Key type blacklist registered
[ 1.525986] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 1.527418] zbud: loaded
[ 1.527776] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.527932] fuse init (API version 7.26)
[ 1.529581] Key type asymmetric registered
[ 1.529582] Asymmetric key parser 'x509' registered
[ 1.529594] bounce: pool size: 64 pages
[ 1.529604] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.529644] io scheduler noop registered
[ 1.529645] io scheduler deadline registered
[ 1.529697] io scheduler cfq registered (default)
[ 1.530273] pcieport 0000:00:1c.0: Signaling PME with IRQ 40
[ 1.530294] pcieport 0000:00:1c.2: Signaling PME with IRQ 41
[ 1.530373] intel_idle: MWAIT substates: 0x11142120
[ 1.530374] intel_idle: v0.4.1 model 0x45
[ 1.530608] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.530749] ACPI: AC Adapter [ACAD] (off-line)
[ 1.530834] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0
[ 1.530842] ACPI: Lid Switch [LID0]
[ 1.530879] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input1
[ 1.530888] ACPI: Power Button [PWRB]
[ 1.530917] ACPI: More than one Lid device found!
[ 1.530949] button: probe of PNP0C0D:01 failed with error -17
[ 1.530985] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.531014] ACPI: Power Button [PWRF]
[ 1.531777] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.531900] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.531901] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.532161] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.532162] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.532348] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.532403] isapnp: Scanning for PnP cards...
[ 1.816115] ACPI: Battery Slot [BAT1] (battery present)
[ 1.816347] Linux agpgart interface v0.103
[ 1.843117] loop: module loaded
[ 1.843318] libphy: Fixed MDIO Bus: probed
[ 1.843319] tun: Universal TUN/TAP device driver, 1.6
[ 1.843361] PPP generic driver version 2.4.2
[ 1.843409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.843412] ehci-pci: EHCI PCI platform driver
[ 1.843560] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.843566] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.843577] ehci-pci 0000:00:1d.0: debug port 2
[ 1.847471] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.847485] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb061c000
[ 1.864044] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.864104] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.864106] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.864108] usb usb1: Product: EHCI Host Controller
[ 1.864109] usb usb1: Manufacturer: Linux 4.15.0-60-generic ehci_hcd
[ 1.864110] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.864245] hub 1-0:1.0: USB hub found
[ 1.864251] hub 1-0:1.0: 2 ports detected
[ 1.864400] ehci-platform: EHCI generic platform driver
[ 1.864414] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.864417] ohci-pci: OHCI PCI platform driver
[ 1.864427] ohci-platform: OHCI generic platform driver
[ 1.864435] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.864571] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.864576] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.865638] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 1.865642] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.865767] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.865769] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.865770] usb usb2: Product: xHCI Host Controller
[ 1.865772] usb usb2: Manufacturer: Linux 4.15.0-60-generic xhci-hcd
[ 1.865773] usb usb2: SerialNumber: 0000:00:14.0
[ 1.865892] hub 2-0:1.0: USB hub found
[ 1.865902] hub 2-0:1.0: 9 ports detected
[ 1.867324] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.867328] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.867331] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.867366] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.867367] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.867368] usb usb3: Product: xHCI Host Controller
[ 1.867370] usb usb3: Manufacturer: Linux 4.15.0-60-generic xhci-hcd
[ 1.867371] usb usb3: SerialNumber: 0000:00:14.0
[ 1.867487] hub 3-0:1.0: USB hub found
[ 1.867494] hub 3-0:1.0: 4 ports detected
[ 1.867912] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 1.877166] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.877171] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.877310] mousedev: PS/2 mouse device common for all mice
[ 1.878672] rtc_cmos 00:01: RTC can wake from S4
[ 1.878797] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.878826] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.878835] i2c /dev entries driver
[ 1.878909] device-mapper: uevent: version 1.0.3
[ 1.878980] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.879003] platform eisa.0: Probing EISA bus 0
[ 1.879004] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.879006] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.879008] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.879009] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.879010] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.879011] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.879013] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.879014] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.879015] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.879017] platform eisa.0: EISA: Detected 0 cards
[ 1.879021] cpufreq_nforce2: No nForce2 chipset
[ 1.879028] intel_pstate: Intel P-state driver initializing
[ 1.884802] isapnp: No Plug & Play device found
[ 1.884953] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.885224] NET: Registered protocol family 10
[ 1.889471] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.892557] Segment Routing with IPv6
[ 1.892586] NET: Registered protocol family 17
[ 1.892646] Key type dns_resolver registered
[ 1.893009] mce: Using 7 MCE banks
[ 1.893045] microcode: sig=0x40651, pf=0x40, revision=0x25
[ 1.893108] microcode: Microcode Update Driver: v2.2.
[ 1.893112] Using IPI No-Shortcut mode
[ 1.893119] sched_clock: Marking stable (1893101725, 0)->(1876194346, 16907379)
[ 1.893362] registered taskstats version 1
[ 1.893371] Loading compiled-in X.509 certificates
[ 1.900331] Loaded X.509 cert 'Build time autogenerated kernel key: c1cbda3ee0fe6f8769057ce652bc1a78806eea99'
[ 1.900352] zswap: loaded using pool lzo/zbud
[ 1.906192] Key type big_key registered
[ 1.906197] Key type trusted registered
[ 1.909056] Key type encrypted registered
[ 1.909060] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.909063] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.909068] ima: Allocated hash algorithm: sha1
[ 1.909087] evm: HMAC attrs: 0x1
[ 1.909423] Magic number: 15:958:336
[ 1.909450] tty tty57: hash matches
[ 1.909554] rtc_cmos 00:01: setting system clock to 2015-05-28 15:20:44 UTC (1432826444)
[ 1.909618] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.909619] EDD information not available.
[ 1.911000] Freeing unused kernel image memory: 1108K
[ 1.952220] Write protecting the kernel text: 8944k
[ 1.952274] Write protecting the kernel read-only data: 3464k
[ 1.952275] NX-protecting the kernel data: 7440k
[ 1.952458] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.952495] x86/mm: Checking user space page tables
[ 1.952517] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.139012] ahci 0000:00:1f.2: version 3.0
[ 2.139265] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.140691] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.140700] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.149351] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[ 2.149355] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 2.153201] scsi host0: ahci
[ 2.153402] r8169 0000:01:00.0 eth0: RTL8106e at 0x(ptrval), f0:76:1c:69:73:2f, XID 10900800 IRQ 44
[ 2.153610] scsi host1: ahci
[ 2.153745] scsi host2: ahci
[ 2.153822] ata1: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b100 irq 43
[ 2.153824] ata2: DUMMY
[ 2.153825] ata3: DUMMY
[ 2.204024] usb 2-2: new low-speed USB device number 2 using xhci_hcd
[ 2.204034] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.358854] usb 2-2: New USB device found, idVendor=046d, idProduct=c03e
[ 2.358856] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.358858] usb 2-2: Product: USB-PS/2 Optical Mouse
[ 2.358859] usb 2-2: Manufacturer: Logitech
[ 2.360481] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ 2.360483] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.360857] hub 1-1:1.0: USB hub found
[ 2.361294] hub 1-1:1.0: 8 ports detected
[ 2.467255] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.468018] ata1.00: ATA-9: WDC WD5000LPCX-24C6HT0, 02.01A02, max UDMA/133
[ 2.468021] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.468848] ata1.00: configured for UDMA/133
[ 2.469139] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPCX-2 1A02 PQ: 0 ANSI: 5
[ 2.469582] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.469632] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.469635] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.469656] sd 0:0:0:0: [sda] Write Protect is off
[ 2.469658] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.469709] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.488056] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[ 2.522883] sda: sda1 sda2 < sda5 >
[ 2.523573] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.556105] tsc: Refined TSC clocksource calibration: 1895.612 MHz
[ 2.556119] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a5f58a5e2, max_idle_ns: 881590593810 ns
[ 2.637057] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
[ 2.637059] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.637061] usb 2-4: Product: USB2.0-CRW
[ 2.637062] usb 2-4: Manufacturer: Generic
[ 2.637064] usb 2-4: SerialNumber: 20100201396000000
[ 2.692795] random: fast init done
[ 2.696677] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.696747] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.703257] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4682]
[ 2.748230] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1172..]
[ 2.748238] psmouse serio1: synaptics: Your touchpad (PNP: SYN2b26 SYN0700 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 2.765256] usb 2-6: new high-speed USB device number 4 using xhci_hcd
[ 2.776746] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.834623] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00/0x0, board id: 2133, fw id: 1468684
[ 2.889876] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.976289] usb 2-6: New USB device found, idVendor=5986, idProduct=0551
[ 2.976292] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.976294] usb 2-6: Product: Lenovo EasyCamera
[ 2.976295] usb 2-6: Manufacturer: Generic
[ 2.976297] usb 2-6: SerialNumber: 200901010001
[ 3.108077] usb 2-7: new full-speed USB device number 5 using xhci_hcd
[ 3.257307] usb 2-7: New USB device found, idVendor=0cf3, idProduct=3004
[ 3.257310] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.269713] usbcore: registered new interface driver rtsx_usb
[ 3.271378] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.280367] usbcore: registered new interface driver usbhid
[ 3.280369] usbhid: USB HID core driver
[ 3.286035] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:046D:C03E.0001/input/input7
[ 3.286160] hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-2/input0
[ 3.580151] clocksource: Switched to clocksource tsc
[ 38.812185] random: crng init done
[ 38.812187] random: 7 urandom warning(s) missed due to ratelimiting
[ 63.024894] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 64.808585] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 64.808637] systemd[1]: System time before build time, advancing clock.
[ 65.279518] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 65.383509] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 65.400188] systemd[1]: Detected architecture x86.
[ 65.439681] systemd[1]: Set hostname to <kurt-Lenovo-M30-70>.
[ 69.400666] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 69.400972] systemd[1]: Created slice System Slice.
[ 69.401083] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 69.401190] systemd[1]: Listening on LVM2 poll daemon socket.
[ 69.401277] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 69.401414] systemd[1]: Listening on Journal Socket.
[ 69.402297] systemd[1]: Starting Uncomplicated firewall...
[ 69.852956] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 70.321109] lp: driver loaded but no devices found
[ 70.563163] ppdev: user-space parallel port driver
[ 70.826776] systemd-journald[309]: Received request to flush runtime journal from PID 1
[ 71.229030] systemd-journald[309]: File /var/log/journal/c89f7628f231945c57facf24556c9713/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 77.973150] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 78.361332] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 78.361335] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 78.361336] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 78.361337] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 78.361338] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 78.463165] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
[ 78.978872] Bluetooth: Core ver 2.22
[ 78.978894] NET: Registered protocol family 31
[ 78.978895] Bluetooth: HCI device and connection manager initialized
[ 78.978899] Bluetooth: HCI socket layer initialized
[ 78.978903] Bluetooth: L2CAP socket layer initialized
[ 78.978910] Bluetooth: SCO socket layer initialized
[ 79.088390] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 79.092895] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 79.754678] usbcore: registered new interface driver btusb
[ 79.885088] media: Linux media interface: v0.10
[ 80.030197] usbcore: registered new interface driver ath3k
[ 80.031650] usb 2-7: USB disconnect, device number 5
[ 80.050565] [drm] Memory usable by graphics device = 2048M
[ 80.050568] [drm] Replacing VGA console driver
[ 80.051116] Console: switching to colour dummy device 80x25
[ 80.062146] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 80.062148] [drm] Driver supports precise vblank timestamp query.
[ 80.064131] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 80.082048] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 80.083875] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 80.084169] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 80.100645] fbcon: inteldrmfb (fb0) is primary device
[ 80.206781] Linux video capture interface: v2.00
[ 80.305111] kvm: disabled by bios
[ 80.356047] usb 2-7: new full-speed USB device number 6 using xhci_hcd
[ 80.372587] kvm: disabled by bios
[ 80.430067] kvm: disabled by bios
[ 80.474706] kvm: disabled by bios
[ 80.496107] ath: phy0: WB335 2-ANT card detected
[ 80.496108] ath: phy0: Set BT/WLAN RX diversity capability
[ 80.504968] ath: phy0: Enable LNA combining
[ 80.506204] ath: phy0: ASPM enabled: 0x43
[ 80.506205] ath: EEPROM regdomain: 0x65
[ 80.506206] ath: EEPROM indicates we should expect a direct regpair map
[ 80.506207] ath: Country alpha2 being used: 00
[ 80.506208] ath: Regpair used: 0x65
[ 80.600797] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 80.601310] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xf8600000, irq=18
[ 80.647961] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0551)
[ 80.652302] uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
[ 80.652305] uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
[ 80.652307] uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
[ 80.652435] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input10
[ 80.652550] usbcore: registered new interface driver uvcvideo
[ 80.652551] USB Video Class driver (1.1.1)
[ 80.661891] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 80.661893] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 80.661895] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 80.661896] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 80.661897] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 80.661899] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 80.661900] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 80.711670] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 80.711767] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 80.855345] intel_rapl: Found RAPL domain package
[ 80.855347] intel_rapl: Found RAPL domain core
[ 80.855348] intel_rapl: Found RAPL domain uncore
[ 80.855349] intel_rapl: Found RAPL domain dram
[ 80.855351] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 81.097193] wl: loading out-of-tree module taints kernel.
[ 81.097197] wl: module license 'MIXED/Proprietary' taints kernel.
[ 81.097198] Disabling lock debugging due to kernel taint
[ 81.099798] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 81.230229] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 81.230230] Console: switching to colour frame buffer device 170x48
[ 81.249604] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 81.351747] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 81.351848] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 81.351943] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 81.352057] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 81.352150] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 85.617244] usb 2-7: New USB device found, idVendor=0cf3, idProduct=3004
[ 85.617247] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 86.125549] Adding 4108284k swap on /dev/mapper/xubuntu--vg-swap_1. Priority:-2 extents:1 across:4108284k FS
[ 89.645536] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 89.667852] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 93.842260] audit: type=1400 audit(1567578082.743:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=717 comm="apparmor_parser"
[ 93.842266] audit: type=1400 audit(1567578082.743:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=717 comm="apparmor_parser"
[ 93.842269] audit: type=1400 audit(1567578082.743:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=717 comm="apparmor_parser"
[ 93.941786] audit: type=1400 audit(1567578082.843:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=714 comm="apparmor_parser"
[ 93.941792] audit: type=1400 audit(1567578082.843:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=714 comm="apparmor_parser"
[ 93.941796] audit: type=1400 audit(1567578082.843:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=714 comm="apparmor_parser"
[ 93.941798] audit: type=1400 audit(1567578082.843:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=714 comm="apparmor_parser"
[ 94.050152] audit: type=1400 audit(1567578082.951:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=718 comm="apparmor_parser"
[ 94.132000] audit: type=1400 audit(1567578083.031:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=719 comm="apparmor_parser"
[ 94.137968] audit: type=1400 audit(1567578083.039:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=720 comm="apparmor_parser"
[ 103.221841] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 103.221843] Bluetooth: BNEP filters: protocol multicast
[ 103.221848] Bluetooth: BNEP socket layer initialized
[ 111.197167] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 111.334054] r8169 0000:01:00.0 eth0: link down
[ 111.334220] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 111.345016] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 111.358143] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 112.006335] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 157.578889] wlan0: authenticate with b0:4e:26:28:66:55
[ 157.594933] wlan0: send auth to b0:4e:26:28:66:55 (try 1/3)
[ 157.600040] wlan0: authenticated
[ 157.600331] wlan0: associating with AP with corrupt probe response
[ 157.604030] wlan0: associate with b0:4e:26:28:66:55 (try 1/3)
[ 157.623921] wlan0: RX AssocResp from b0:4e:26:28:66:55 (capab=0xc11 status=0 aid=4)
[ 157.624092] wlan0: associated
[ 157.933279] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 165.607617] Bluetooth: RFCOMM TTY layer initialized
[ 165.607624] Bluetooth: RFCOMM socket layer initialized
[ 165.607725] Bluetooth: RFCOMM ver 1.11