pbg
Anmeldungsdatum: 16. Mai 2019
Beiträge: 65
|
Hallo,
ich habe seit 21.10 ein Problem mit den Druckern: Z.B der Kyocera M5521.cdn wird von der automatischen Druckerkonfiguration (ich habe in einem Artikel gelesen, dass man die mit einem Script abschalten kann, finde aber die Seite nicht wieder) gefunden und mit Treiber <Aktuell - ECOSYS M5521cdn, driverless, cups-filters 1.28.10> unter <implicitclass://Kyocera_ECOSYS_M5521cdn/> eingebunden. Wenn ich einen Druckauftrag losschicke, erscheint der in der Warteschlange, der Drucker wird aber anscheinend nicht "geweckt".
Bei 21.04 funktionierte das noch tadellos und ich bin etwas rat-los. Die komplette "cups" Reihe habe ich schon mal mit Synaptic neu installiert, hat aber nichts geholfen. der Fehler tritt bei allen 21.10'ern auf, also Gnome, Kubuntu und Budgie, nicht aber bei Mint (das ja noch 21.04 als Basis hat).
Hat jemand eine Idee, was da schiefläuft? Am Drucker liegt es nicht, der läuft mit Mint, und beim Minolta das gleiche Spiel.
Edit: Habe es heute mal vom Kyocera-Druckcenter unter Windoze probiert, da druckt er normal.
In Kubuntu Testseite gedruckt, in "Drucker-Systemeinstellungen" blitzt kurz (nicht vollständig lesbar) etwas mit "not accepted" auf, und dann "ready". In der Druckerwarteschlange steht dann eine ausstehende Testseite mit 8 (!) Seiten und der Statusmeldung "Bad value (0) for orientation-requested, using 0 degrees
In /var/log/cups steht als Error-log:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217 | E [27/Oct/2021:09:47:54 +0200] [Job 19] Unable to queue job for destination "Unknown".
E [27/Oct/2021:09:50:13 +0200] [Job 20] Die Druckdatei kann nicht geöffnet werden: Permission denied
W [27/Oct/2021:09:50:13 +0200] [Job 20] Backend returned status 1 (failed)
W [27/Oct/2021:09:51:04 +0200] [Job 21] Backend returned status 7 (retry job immediately)
W [27/Oct/2021:09:51:09 +0200] [Job 21] Backend returned status 7 (retry job immediately)
W [27/Oct/2021:09:51:14 +0200] [Job 21] Backend returned status 7 (retry job immediately)
W [27/Oct/2021:09:51:19 +0200] [Job 21] Backend returned status 7 (retry job immediately)
W [27/Oct/2021:09:51:24 +0200] [Job 21] Backend returned status 7 (retry job immediately)
W [27/Oct/2021:09:51:29 +0200] [Job 21] Backend returned status 7 (retry job immediately)
W [27/Oct/2021:09:51:34 +0200] [Job 21] Backend returned status 7 (retry job immediately)
W [27/Oct/2021:09:51:54 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Kyocera_ECOSYS_M5521cdn_USB_-Gray..\' already exists
W [27/Oct/2021:09:51:54 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Kyocera_ECOSYS_M5521cdn_USB_-DeviceN..\' already exists
E [27/Oct/2021:09:52:36 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:52:37 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:52:47 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:52:47 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degreesDebug: implicitclass - copying to temp print file \"/tmp/0215d617c37de\"
E [27/Oct/2021:09:52:47 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:52:57 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:52:57 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:52:57 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:53:07 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:53:07 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:53:07 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:53:17 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:53:17 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:53:17 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:53:27 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:53:27 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:53:27 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:53:38 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:53:38 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:53:38 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:53:48 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:53:48 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:53:48 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:53:58 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:53:58 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:53:58 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:54:08 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:54:08 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:54:08 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:54:18 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:54:18 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:54:18 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:54:28 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:54:28 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:54:28 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:54:38 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:54:38 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:54:39 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:54:49 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:54:49 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:54:49 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:54:59 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:54:59 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:54:59 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:55:09 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:55:09 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:55:09 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:55:19 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:55:19 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:55:19 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:55:29 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:55:29 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:55:30 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:55:40 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:55:40 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:55:40 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:55:50 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:55:50 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:55:50 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:56:00 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:56:00 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:56:00 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:56:10 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:56:10 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:56:10 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:56:20 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:56:20 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:56:20 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:56:30 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:56:30 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:56:31 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:56:41 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:56:41 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:56:41 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:56:51 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:56:51 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:56:51 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:57:01 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:57:01 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:57:01 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:57:11 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:57:11 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:57:11 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:58:16 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Kyocera_ECOSYS_M5521cdn_USB_-Gray..\' already exists
W [27/Oct/2021:09:58:16 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Kyocera_ECOSYS_M5521cdn_USB_-DeviceN..\' already exists
E [27/Oct/2021:09:58:28 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:58:28 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:58:38 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:58:38 +0200] [Job 22] DEBUG: Received job for the printer with the destination uri - ipp://Kyocera%20ECOSYS%20M5521cdn%20(USB)._ipp._tcp.local/, Final-document format for the printer - pdf and requested resolution - 600dpi
E [27/Oct/2021:09:58:38 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:58:48 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:58:48 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:58:48 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:58:58 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:58:58 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:58:58 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:59:08 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:59:08 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:59:09 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:59:19 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:59:19 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:59:19 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:59:29 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:59:29 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:59:29 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:59:39 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:59:39 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:59:39 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:59:49 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:59:49 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:59:49 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:09:59:59 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:09:59:59 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:09:59:59 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:00:09 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:00:09 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:00:10 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:00:20 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:00:20 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:00:20 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
E [27/Oct/2021:10:00:24 +0200] [Job 23] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:00:25 +0200] [Job 23] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:00:30 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:00:30 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:00:30 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:00:35 +0200] [Job 23] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:00:35 +0200] [Job 23] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:00:35 +0200] [Job 23] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:00:40 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:00:40 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:00:40 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:00:45 +0200] [Job 23] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:00:45 +0200] [Job 23] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:00:45 +0200] [Job 23] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:00:50 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:00:50 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:00:50 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:00:55 +0200] [Job 23] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:00:55 +0200] [Job 23] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:00:55 +0200] [Job 23] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:01:00 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:01:00 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:01:00 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:01:05 +0200] [Job 23] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:01:05 +0200] [Job 23] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:01:05 +0200] [Job 23] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:01:10 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:01:10 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:01:11 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:01:15 +0200] [Job 23] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:01:15 +0200] [Job 23] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:01:16 +0200] [Job 23] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:01:21 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:01:21 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:01:21 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:01:26 +0200] [Job 23] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:01:26 +0200] [Job 23] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:01:26 +0200] [Job 23] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:01:31 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:01:31 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:01:31 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:01:36 +0200] [Job 23] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:01:36 +0200] [Job 23] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:01:36 +0200] [Job 23] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:01:41 +0200] [Job 22] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:01:41 +0200] [Job 22] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:01:41 +0200] [Job 22] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:01:46 +0200] [Job 23] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:01:46 +0200] [Job 23] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:01:46 +0200] [Job 23] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:01:56 +0200] [Job 23] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:01:56 +0200] [Job 23] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:01:56 +0200] [Job 23] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:02:06 +0200] [Job 23] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:02:06 +0200] [Job 23] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:10:02:06 +0200] [Job 23] Der Druckauftrag wurde nicht angenommen.
E [27/Oct/2021:10:02:19 +0200] [Job 24] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:02:29 +0200] [Job 24] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:02:29 +0200] [Job 24] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:10:02:39 +0200] [Job 24] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:10:02:39 +0200] [Job 24] Der Druckauftrag wurde nicht angenommen.
E [27/Oct/2021:11:04:56 +0200] [Job 19] Files have gone away.
E [27/Oct/2021:11:09:36 +0200] [Job 25] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:11:09:38 +0200] [Job 25] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:11:09:48 +0200] [Job 25] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:11:09:48 +0200] [Job 25] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:11:09:48 +0200] [Job 25] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:11:09:58 +0200] [Job 25] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:11:09:58 +0200] [Job 25] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:11:09:59 +0200] [Job 25] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:11:10:09 +0200] [Job 25] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:11:10:09 +0200] [Job 25] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:11:10:09 +0200] [Job 25] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:11:10:19 +0200] [Job 25] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:11:10:19 +0200] [Job 25] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:11:10:19 +0200] [Job 25] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:11:10:29 +0200] [Job 25] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:11:10:29 +0200] [Job 25] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:11:10:29 +0200] [Job 25] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:11:10:39 +0200] [Job 25] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:11:10:39 +0200] [Job 25] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:11:10:39 +0200] [Job 25] Der Druckauftrag wurde nicht angenommen.
W [27/Oct/2021:11:10:49 +0200] [Job 25] Backend returned status 7 (retry job immediately)
E [27/Oct/2021:11:10:49 +0200] [Job 25] Bad value (0) for orientation-requested, using 0 degrees
E [27/Oct/2021:11:10:49 +0200] [Job 25] Der Druckauftrag wurde nicht angenommen.
|
Das "Permission denied" in Zeile 2 deutet doch auf ein Rechteproblem hin?
Gleiches Verhalten beim Druck über USB, also sicher kein Netzwerkproblem. Als User bin ich mit "Systemverwalter" eingetragen, Kuser gibt es ja nicht mehr, wo kann ich denn die Rechte überprüfen?
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Moin, wir sehen erst mal was du so hast.Dazu zeige systemctl --no-pager status cups* id dpkg -l | egrep 'ippusbxd|libusb-0.1-4|system-config-printer-udev' avahi-browse -rt _ipp._tcp lpstat -l -e -r -p danach sehen wir weiter.
|
pbg
(Themenstarter)
Anmeldungsdatum: 16. Mai 2019
Beiträge: 65
|
Kellerkind_2009 schrieb: Moin, wir sehen erst mal was du so hast.Dazu zeige systemctl --no-pager status cups*
{{{
eterb@black:~$ systemctl --no-pager status cups*
● cups.path - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.path; enabled; vendor preset: enabled)
Active: active (running) since Sat 2021-10-30 09:09:58 CEST; 29min ago
Triggers: ● cups.service
Okt 30 09:09:58 black systemd[1]: Started CUPS Scheduler.
● cups.service - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.service; enabled; vendor preset: enabled)
Active: active (running) since Sat 2021-10-30 09:09:59 CEST; 29min ago
TriggeredBy: ● cups.socket
● cups.path
Docs: man:cupsd(8)
Main PID: 1786 (cupsd)
Status: "Scheduler is running..."
Tasks: 7 (limit: 76954)
Memory: 10.9M
CPU: 5.283s
CGroup: /system.slice/cups.service
├─ 1786 /usr/sbin/cupsd -l
├─10509 /usr/lib/cups/notifier/dbus dbus://
├─10510 /usr/lib/cups/notifier/dbus dbus://
├─10712 implicitclass://Kyocera_ECOSYS_M5521cdn/ 29 pe…
└─10719 ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.lo…
Okt 30 09:09:58 black systemd[1]: Starting CUPS Scheduler...
Okt 30 09:09:59 black systemd[1]: Started CUPS Scheduler.
● cups-browsed.service - Make remote CUPS printers available locally
Loaded: loaded (/lib/systemd/system/cups-browsed.service; enabled; vendor preset: enabled)
Active: active (running) since Sat 2021-10-30 09:10:02 CEST; 29min ago
Main PID: 2983 (cups-browsed)
Tasks: 3 (limit: 76954)
Memory: 3.9M
CPU: 248ms
CGroup: /system.slice/cups-browsed.service
└─2983 /usr/sbin/cups-browsed
Okt 30 09:10:02 black systemd[1]: Started Make remote CUPS print…ly.
● cups.socket - CUPS Scheduler
Loaded: loaded (/lib/systemd/system/cups.socket; enabled; vendor preset: enabled)
Active: active (running) since Sat 2021-10-30 09:09:58 CEST; 29min ago
Triggers: ● cups.service
Listen: /run/cups/cups.sock (Stream)
Tasks: 0 (limit: 76954)
Memory: 0B
CPU: 0
CGroup: /system.slice/cups.socket
Okt 30 09:09:58 black systemd[1]: Listening on CUPS Scheduler.
Hint: Some lines were ellipsized, use -l to show in full.
}}} id {{{
peterb@black:~$ id
uid=1000(peterb) gid=1000(peterb) Gruppen=1000(peterb),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),123(lpadmin),132(lxd),133(sambashare)
dpkg -l | egrep 'ippusbxd|libusb-0.1-4|system-config-printer-udev'
}}} {{{
peterb@black:~$ dpkg -l | egrep 'ippusbxd|libusb-0.1-4|system-config-printer-udev'
ii system-config-printer-udev 1.5.15-0ubuntu2 amd64 Utilities to detect and configure printers automatically
avahi-browse -rt _ipp._tcp
}}} {{{
peterb@black:~$ avahi-browse -rt _ipp._tcp
+ eno1 IPv6 Kyocera ECOSYS M5521cdn Internet Printer local
+ eno1 IPv6 5430DL @ black Internet Printer local
+ eno1 IPv4 Kyocera ECOSYS M5521cdn Internet Printer local
+ eno1 IPv4 5430DL @ black Internet Printer local
+ lo IPv4 5430DL @ black Internet Printer local
= eno1 IPv6 Kyocera ECOSYS M5521cdn Internet Printer local
hostname = [Kyocera.local]
address = [192.168.2.32]
port = [631]
txt = ["air=none" "mopria-certified=1.2" "print_wfds=T" "rp=ipp/print" "priority=48" "rfo=ipp/faxout" "kind=document,envelope" "PaperMax=legal-A4" "URF=CP255,DM4,IFU0,IS19-20,OB1-10,PQ4,RS600,SRGB24,V1.4,W8" "UUID=4509a320-00a4-0092-00b1-002507512498" "Color=T" "Scan=T" "Fax=T" "Duplex=T" "adminurl=http://Kyocera.local/airprint" "note=Buero Peter" "usb_MDL=Kyocera ECOSYS M5521cdn (KPDL)" "usb_MFG=Kyocera" "qtotal=1" "ty=Kyocera ECOSYS M5521cdn" "product=(ECOSYS M5521cdn)" "pdl=image/pwg-raster,application/octet-stream,application/pdf,image/tiff,image/jpeg,image/urf,application/postscript,application/vnd.hp-PCL,application/vnd.hp-PCLXL,application/vnd.xpsdocument" "txtvers=1"]
= eno1 IPv4 Kyocera ECOSYS M5521cdn Internet Printer local
hostname = [Kyocera.local]
address = [192.168.2.32]
port = [631]
txt = ["air=none" "mopria-certified=1.2" "print_wfds=T" "rp=ipp/print" "priority=48" "rfo=ipp/faxout" "kind=document,envelope" "PaperMax=legal-A4" "URF=CP255,DM4,IFU0,IS19-20,OB1-10,PQ4,RS600,SRGB24,V1.4,W8" "UUID=4509a320-00a4-0092-00b1-002507512498" "Color=T" "Scan=T" "Fax=T" "Duplex=T" "adminurl=http://Kyocera.local/airprint" "note=Buero Peter" "usb_MDL=Kyocera ECOSYS M5521cdn (KPDL)" "usb_MFG=Kyocera" "qtotal=1" "ty=Kyocera ECOSYS M5521cdn" "product=(ECOSYS M5521cdn)" "pdl=image/pwg-raster,application/octet-stream,application/pdf,image/tiff,image/jpeg,image/urf,application/postscript,application/vnd.hp-PCL,application/vnd.hp-PCLXL,application/vnd.xpsdocument" "txtvers=1"]
= eno1 IPv4 5430DL @ black Internet Printer local
hostname = [black.local]
address = [192.168.2.61]
port = [631]
txt = ["printer-type=0x904E" "printer-state=3" "Copies=T" "Color=T" "TLS=1.2" "UUID=9ee766bb-35cf-3747-6f03-301c8d7501cd" "URF=DM3" "pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf" "product=(magicolor 5430 DL)" "priority=0" "note=B\195\188ro Ilona" "adminurl=https://black.local.:631/printers/Minolta" "ty=KONICA MINOLTA magicolor 5430 DL" "rp=printers/Minolta" "qtotal=1" "txtvers=1"]
= lo IPv4 5430DL @ black Internet Printer local
hostname = [black.local]
address = [127.0.0.1]
port = [631]
txt = ["printer-type=0x904E" "printer-state=3" "Copies=T" "Color=T" "TLS=1.2" "UUID=9ee766bb-35cf-3747-6f03-301c8d7501cd" "URF=DM3" "pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf" "product=(magicolor 5430 DL)" "priority=0" "note=B\195\188ro Ilona" "adminurl=https://black.local.:631/printers/Minolta" "ty=KONICA MINOLTA magicolor 5430 DL" "rp=printers/Minolta" "qtotal=1" "txtvers=1"]
= eno1 IPv6 5430DL @ black Internet Printer local
hostname = [black.local]
address = [fe80::aed7:4874:f17a:e9f1]
port = [631]
txt = ["printer-type=0x904E" "printer-state=3" "Copies=T" "Color=T" "TLS=1.2" "UUID=9ee766bb-35cf-3747-6f03-301c8d7501cd" "URF=DM3" "pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf" "product=(magicolor 5430 DL)" "priority=0" "note=B\195\188ro Ilona" "adminurl=https://black.local.:631/printers/Minolta" "ty=KONICA MINOLTA magicolor 5430 DL" "rp=printers/Minolta" "qtotal=1" "txtvers=1"]
lpstat -l -e -r -p
}}} danach sehen wir weiter.
peterb@black:~$ lpstat -l -e -r -p
5430DL_black network none ipps://5430DL%20%40%20black._ipps._tcp.local/cups
Kyocera_ECOSYS_M5521cdn network none ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/
Minolta permanent ipp://localhost/printers/Minolta ipps://minolta
Zeitplandienst läuft
Drucker Kyocera_ECOSYS_M5521cdn druckt jetzt Kyocera_ECOSYS_M5521cdn-29. Aktiviert seit Sa 30 Okt 2021 09:44:11 CEST
Ready.
Geladenes Formblatt
Inhaltstypen: beliebig
Druckertypen: unbekannt
Beschreibung: Kyocera_ECOSYS_M5521cdn
Alarme: none
Ort:
Verbindung: direkt
Schnittstelle: /etc/cups/ppp/Kyocera_ECOSYS_M5521cdn.ppd
Bei Fehlern: kein Alarm
Nach einem Fehler: fortfahren
Erlaubte Benutzer:
(alle)
Erlaubte Formblätter:
(keine)
Banner erforderlich
Zeichensatz Set:
(keine)
Voreingestellte Neigung:
Voreingestellte Seitengrösse:
Voreingestellte Porteinstellungen:
Drucker Minolta ist im Leerlauf. Aktiviert seit Di 26 Okt 2021 20:11:16 CEST
Geladenes Formblatt
Inhaltstypen: beliebig
Druckertypen: unbekannt
Beschreibung: 5430DL
Alarme: none
Ort: Büro Ilona
Verbindung: direkt
Schnittstelle: /etc/cups/ppp/Minolta.ppd
Bei Fehlern: kein Alarm
Nach einem Fehler: fortfahren
Erlaubte Benutzer:
(alle)
Erlaubte Formblätter:
(keine)
Banner erforderlich
Zeichensatz Set:
(keine)
Voreingestellte Neigung:
Voreingestellte Seitengrösse:
Voreingestellte Porteinstellungen:
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Wir bringen dich mal in die Gruppe lp.Dazu sudo adduser $USER lp und Installieren einen Treiber sudo apt install libusb-0.1-4 Neustart.Dann mal einen Testdruck starten und die Ausgabe zeigen von tail -n 150 /var/log/cups/error_log journalctl -b | grep -i cups
|
pbg
(Themenstarter)
Anmeldungsdatum: 16. Mai 2019
Beiträge: 65
|
Kellerkind_2009 schrieb: Wir bringen dich mal in die Gruppe lp.Dazu sudo adduser $USER lp
Passiert, aus und eingeloggt
und Installieren einen Treiber > sudo apt install libusb-0.1-4
>
Ja
Neustart.Dann mal einen Testdruck starten und die Ausgabe zeigen von > tail -n 150 /var/log/cups/error_log
>
peterb@black:~$ tail -n 150 /var/log/cups/error_log
E [30/Oct/2021:15:14:41 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:14:42 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:14:52 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:14:52 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:14:52 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:15:02 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:15:02 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:15:03 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:15:13 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:15:13 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:15:14 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:15:24 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:15:24 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:15:24 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:15:34 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:15:34 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:15:35 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:15:45 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:15:45 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:15:45 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:15:55 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:15:55 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:15:56 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:16:06 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:16:06 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:16:07 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:16:17 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:16:17 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:16:17 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:16:27 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:16:27 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:16:28 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:16:38 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:16:38 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:16:38 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:16:48 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:16:48 +0200] [Job 29] DEBUG: OUTFORMAT=\"PDF\", so output format will be PDF
E [30/Oct/2021:15:16:49 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:16:59 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:16:59 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:17:00 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:17:10 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:17:10 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:17:10 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:17:20 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:17:20 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:17:21 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:17:31 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:17:31 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:17:31 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:17:41 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:17:41 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:17:42 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:17:52 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:17:52 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:17:53 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:18:03 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:18:03 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:18:03 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:18:13 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:18:13 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:18:14 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:18:24 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:18:24 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:18:24 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:18:34 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:18:34 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:18:35 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:18:45 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:18:45 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:18:45 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:19:38 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Kyocera_ECOSYS_M5521cdn-Gray..\' already exists
W [30/Oct/2021:15:19:38 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Kyocera_ECOSYS_M5521cdn-DeviceN..\' already exists
E [30/Oct/2021:15:19:45 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:19:46 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:19:56 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:19:56 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:19:56 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:20:06 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:20:06 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:20:06 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:20:16 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:20:16 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:20:17 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:20:27 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:20:27 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:20:28 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:20:38 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:20:38 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:20:38 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:20:48 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:20:48 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:20:49 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:20:59 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:20:59 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:20:59 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:21:09 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:21:09 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:21:10 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:21:20 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:21:20 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:21:21 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:21:31 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:21:31 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:21:31 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:21:41 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:21:41 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:21:42 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:21:52 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:21:52 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:21:52 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:22:02 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:22:02 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:22:03 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:22:13 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:22:13 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:22:13 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:22:23 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:22:23 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:22:24 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:22:34 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:22:34 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:22:35 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:22:45 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:22:45 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:22:45 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:22:55 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:22:55 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:22:56 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:23:06 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:23:06 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:23:06 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:23:16 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:23:16 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:23:17 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:23:27 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:23:27 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:23:28 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:23:38 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:23:38 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:23:38 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:23:48 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:23:48 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:23:49 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:23:59 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:23:59 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:23:59 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
W [30/Oct/2021:15:24:09 +0200] [Job 29] Backend returned status 7 (retry job immediately)
E [30/Oct/2021:15:24:09 +0200] [Job 29] Bad value (0) for orientation-requested, using 0 degrees
E [30/Oct/2021:15:24:10 +0200] [Job 29] Der Druckauftrag wurde nicht angenommen.
peterb@black:~$
> journalctl -b | grep -i cups
>
peterb@black:~$ journalctl -b | grep -i cups
Okt 30 15:19:32 black audit[1474]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1474 comm="apparmor_parser"
Okt 30 15:19:33 black audit[1475]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1475 comm="apparmor_parser"
Okt 30 15:19:33 black audit[1475]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1475 comm="apparmor_parser"
Okt 30 15:19:33 black audit[1475]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1475 comm="apparmor_parser"
Okt 30 15:19:33 black systemd[1]: Started CUPS Scheduler.
Okt 30 15:19:33 black systemd[1]: Listening on CUPS Scheduler.
Okt 30 15:19:33 black systemd[1]: Starting CUPS Scheduler...
Okt 30 15:19:33 black dbus-daemon[1547]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service' requested by ':1.17' (uid=0 pid=1659 comm="/usr/sbin/cupsd -l " label="/usr/sbin/cupsd (enforce)")
Okt 30 15:19:34 black audit[1659]: AVC apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1659 comm="cupsd" capability=12 capname="net_admin"
Okt 30 15:19:34 black audit[1659]: SYSCALL arch=c000003e syscall=54 success=no exit=-1 a0=d a1=1 a2=20 a3=7ffcd4351ab4 items=0 ppid=1 pid=1659 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="cupsd" exe="/usr/sbin/cupsd" subj=/usr/sbin/cupsd key=(null)
Okt 30 15:19:34 black systemd[1]: Started CUPS Scheduler.
Okt 30 15:19:34 black audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg='unit=cups comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 30 15:19:37 black systemd[1]: Started Make remote CUPS printers available locally.
Okt 30 15:19:37 black audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg='unit=cups-browsed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Okt 30 15:19:37 black audit[3050]: AVC apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=3050 comm="cups-browsed" capability=23 capname="sys_nice"
Okt 30 15:19:37 black audit[3050]: SYSCALL arch=c000003e syscall=314 success=yes exit=0 a0=bea a1=563a7152cf80 a2=0 a3=563a7152bdf0 items=0 ppid=1 pid=3050 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="cups-browsed" exe="/usr/sbin/cups-browsed" subj=/usr/sbin/cups-browsed key=(null)
Okt 30 15:19:37 black audit: PROCTITLE proctitle="/usr/sbin/cups-browsed"
Okt 30 15:19:38 black audit[1659]: AVC apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/proc/sys/kernel/osrelease" pid=1659 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Okt 30 15:19:38 black audit[1659]: SYSCALL arch=c000003e syscall=257 success=no exit=-13 a0=ffffff9c a1=7fc8f3d04476 a2=80000 a3=0 items=0 ppid=1 pid=1659 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="cupsd" exe="/usr/sbin/cupsd" subj=/usr/sbin/cupsd key=(null)
Okt 30 15:19:38 black audit[1659]: AVC apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/proc/1/environ" pid=1659 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Okt 30 15:19:38 black audit[1659]: SYSCALL arch=c000003e syscall=257 success=no exit=-13 a0=ffffff9c a1=7ffcd433f6b0 a2=80000 a3=0 items=0 ppid=1 pid=1659 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="cupsd" exe="/usr/sbin/cupsd" subj=/usr/sbin/cupsd key=(null)
Okt 30 15:19:38 black audit[1659]: AVC apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/proc/cmdline" pid=1659 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Okt 30 15:19:38 black audit[1659]: SYSCALL arch=c000003e syscall=257 success=no exit=-13 a0=ffffff9c a1=7fc8f3d04630 a2=80000 a3=0 items=0 ppid=1 pid=1659 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="cupsd" exe="/usr/sbin/cupsd" subj=/usr/sbin/cupsd key=(null)
peterb@black:~$
OK, ich hoffe, das hilft weiter ;-)
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Hmm,der Drucker lehnt die Anfrage immer noch ab.Ich denke mal,das es bei dem Minolta genauso ist. Zeige mal sudo ufw status sudo cupsd -t cups-browsed -v
|
pbg
(Themenstarter)
Anmeldungsdatum: 16. Mai 2019
Beiträge: 65
|
Kellerkind_2009 schrieb: Hmm,der Drucker lehnt die Anfrage immer noch ab.Ich denke mal,das es bei dem Minolta genauso ist.
Nein, auf dem habe ich gestern noch gedruckt.
Das merkwürdige ist, dass vom Mint 20.2 auf der gleichen Maschine der Druck funktioniert. Deshalb dachte ich ja, dass entweder irgendwas "zerkonfiguriert" ist oder die Rechte nicht stimmen.
Zeige mal sudo ufw status
peterb@black:~$ sudo ufw status
Status: Inaktiv
Die Firewall scheint es nicht zu sein > sudo cupsd -t
>
peterb@black:~$ sudo cupsd -t
"/etc/cups/cups-files.conf" is OK.
"/etc/cups/cupsd.conf" is OK.
> cups-browsed -v
>
Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:35 2021 on_printer_modified() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer modified: Printer "Kyocera_ECOSYS_M5521cdn" modified by "root".
Sat Oct 30 17:09:35 2021 Requested IPP attributes (get-printer-attributes) for printer with URI ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 Full list of all IPP attributes:
Sat Oct 30 17:09:35 2021 Attr: attributes-charset
Sat Oct 30 17:09:35 2021 Value: utf-8
Sat Oct 30 17:09:35 2021 Keyword: utf-8
Sat Oct 30 17:09:35 2021 Attr: attributes-natural-language
Sat Oct 30 17:09:35 2021 Value: de-de
Sat Oct 30 17:09:35 2021 Keyword: de-de
Sat Oct 30 17:09:35 2021 Attr: printer-uri-supported
Sat Oct 30 17:09:35 2021 Value: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 Keyword: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 Attr: printer-name
Sat Oct 30 17:09:35 2021 Value: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 Keyword: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 Attr: device-uri
Sat Oct 30 17:09:35 2021 Value: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:09:35 2021 Keyword: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:09:35 2021 Attr: printer-make-and-model
Sat Oct 30 17:09:35 2021 Value: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:09:35 2021 Keyword: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:09:35 2021
Sat Oct 30 17:09:35 2021 Settings of printer Kyocera_ECOSYS_M5521cdn got modified, doing backup.
Sat Oct 30 17:09:35 2021 Recording printer options for Kyocera_ECOSYS_M5521cdn to /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 Recording option settings of the PPD file for Kyocera_ECOSYS_M5521cdn (ECOSYS M5521cdn, driverless, cups-filters 1.28.10):
Sat Oct 30 17:09:35 2021 ColorModel=RGB
Sat Oct 30 17:09:35 2021 cupsPrintQuality=Normal
Sat Oct 30 17:09:35 2021 Duplex=DuplexNoTumble
Sat Oct 30 17:09:35 2021 InputSlot=Tray1
Sat Oct 30 17:09:35 2021 MediaType=Stationery
Sat Oct 30 17:09:35 2021 OutputBin=Top
Sat Oct 30 17:09:35 2021 PageSize=A4
Sat Oct 30 17:09:35 2021 print-scaling=auto
Sat Oct 30 17:09:35 2021 Recording option settings from the IPP attributes for Kyocera_ECOSYS_M5521cdn:
Sat Oct 30 17:09:35 2021 printer-error-policy=retry-job
Sat Oct 30 17:09:35 2021 printer-is-accepting-jobs=true
Sat Oct 30 17:09:35 2021 printer-is-shared=false
Sat Oct 30 17:09:35 2021 printer-op-policy=default
Sat Oct 30 17:09:35 2021 printer-location=
Sat Oct 30 17:09:35 2021 printer-geo-location=unknown
Sat Oct 30 17:09:35 2021 printer-info=Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 printer-organization=
Sat Oct 30 17:09:35 2021 printer-organizational-unit=
Sat Oct 30 17:09:35 2021 job-quota-period=0
Sat Oct 30 17:09:35 2021 job-k-limit=0
Sat Oct 30 17:09:35 2021 job-page-limit=0
Sat Oct 30 17:09:35 2021 job-sheets-default=none,none
Sat Oct 30 17:09:35 2021 copies-default=1
Sat Oct 30 17:09:35 2021 cups-browsed-default=true
Sat Oct 30 17:09:35 2021 finishings-default=0
Sat Oct 30 17:09:35 2021 job-cancel-after-default=10800
Sat Oct 30 17:09:35 2021 job-hold-until-default=no-hold
Sat Oct 30 17:09:35 2021 job-priority-default=50
Sat Oct 30 17:09:35 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:09:35 2021 notify-events-default=job-completed
Sat Oct 30 17:09:35 2021 notify-lease-duration-default=86400
Sat Oct 30 17:09:35 2021 number-up-default=1
Sat Oct 30 17:09:35 2021 orientation-requested-default=0
Sat Oct 30 17:09:35 2021 output-bin-default=top
Sat Oct 30 17:09:35 2021 print-color-mode-default=color
Sat Oct 30 17:09:35 2021 print-quality-default=0
Sat Oct 30 17:09:35 2021 printer-resolution-default=600dpi
Sat Oct 30 17:09:35 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:09:35 2021 document-format-default=application/octet-stream
Sat Oct 30 17:09:35 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:09:35 2021 media-col-default={media-size={x-dimension=21000 y-dimension=29700} media-bottom-margin=400 media-left-margin=400 media-right-margin=400 media-top-margin=400}
Sat Oct 30 17:09:35 2021 output-bin-default=top
Sat Oct 30 17:09:35 2021 print-color-mode-default=color
Sat Oct 30 17:09:35 2021 printer-resolution-default=600dpi
Sat Oct 30 17:09:35 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:09:35 2021 finishings-default=none
Sat Oct 30 17:09:35 2021 ERROR: Failed creating file /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn: Permission denied
Sat Oct 30 17:09:35 2021 on_printer_modified() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer modified: Printer "Kyocera_ECOSYS_M5521cdn" modified by "peterb".
Sat Oct 30 17:09:35 2021 Requested IPP attributes (get-printer-attributes) for printer with URI ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 Full list of all IPP attributes:
Sat Oct 30 17:09:35 2021 Attr: attributes-charset
Sat Oct 30 17:09:35 2021 Value: utf-8
Sat Oct 30 17:09:35 2021 Keyword: utf-8
Sat Oct 30 17:09:35 2021 Attr: attributes-natural-language
Sat Oct 30 17:09:35 2021 Value: de-de
Sat Oct 30 17:09:35 2021 Keyword: de-de
Sat Oct 30 17:09:35 2021 Attr: printer-uri-supported
Sat Oct 30 17:09:35 2021 Value: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 Keyword: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 Attr: printer-name
Sat Oct 30 17:09:35 2021 Value: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 Keyword: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 Attr: device-uri
Sat Oct 30 17:09:35 2021 Value: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:09:35 2021 Keyword: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:09:35 2021 Attr: printer-make-and-model
Sat Oct 30 17:09:35 2021 Value: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:09:35 2021 Keyword: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:09:35 2021
Sat Oct 30 17:09:35 2021 Settings of printer Kyocera_ECOSYS_M5521cdn got modified, doing backup.
Sat Oct 30 17:09:35 2021 Recording printer options for Kyocera_ECOSYS_M5521cdn to /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 Recording option settings of the PPD file for Kyocera_ECOSYS_M5521cdn (ECOSYS M5521cdn, driverless, cups-filters 1.28.10):
Sat Oct 30 17:09:35 2021 ColorModel=RGB
Sat Oct 30 17:09:35 2021 cupsPrintQuality=Normal
Sat Oct 30 17:09:35 2021 Duplex=DuplexNoTumble
Sat Oct 30 17:09:35 2021 InputSlot=Tray1
Sat Oct 30 17:09:35 2021 MediaType=Stationery
Sat Oct 30 17:09:35 2021 OutputBin=Top
Sat Oct 30 17:09:35 2021 PageSize=A4
Sat Oct 30 17:09:35 2021 print-scaling=auto
Sat Oct 30 17:09:35 2021 Recording option settings from the IPP attributes for Kyocera_ECOSYS_M5521cdn:
Sat Oct 30 17:09:35 2021 printer-error-policy=retry-job
Sat Oct 30 17:09:35 2021 printer-is-accepting-jobs=true
Sat Oct 30 17:09:35 2021 printer-is-shared=false
Sat Oct 30 17:09:35 2021 printer-op-policy=default
Sat Oct 30 17:09:35 2021 printer-location=
Sat Oct 30 17:09:35 2021 printer-geo-location=unknown
Sat Oct 30 17:09:35 2021 printer-info=Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:35 2021 printer-organization=
Sat Oct 30 17:09:35 2021 printer-organizational-unit=
Sat Oct 30 17:09:35 2021 job-quota-period=0
Sat Oct 30 17:09:35 2021 job-k-limit=0
Sat Oct 30 17:09:35 2021 job-page-limit=0
Sat Oct 30 17:09:35 2021 job-sheets-default=none,none
Sat Oct 30 17:09:35 2021 copies-default=1
Sat Oct 30 17:09:35 2021 cups-browsed-default=true
Sat Oct 30 17:09:35 2021 finishings-default=0
Sat Oct 30 17:09:35 2021 job-cancel-after-default=10800
Sat Oct 30 17:09:35 2021 job-hold-until-default=no-hold
Sat Oct 30 17:09:35 2021 job-priority-default=50
Sat Oct 30 17:09:35 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:09:35 2021 notify-events-default=job-completed
Sat Oct 30 17:09:35 2021 notify-lease-duration-default=86400
Sat Oct 30 17:09:35 2021 number-up-default=1
Sat Oct 30 17:09:35 2021 orientation-requested-default=0
Sat Oct 30 17:09:35 2021 output-bin-default=top
Sat Oct 30 17:09:35 2021 print-color-mode-default=color
Sat Oct 30 17:09:35 2021 print-quality-default=0
Sat Oct 30 17:09:35 2021 printer-resolution-default=600dpi
Sat Oct 30 17:09:35 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:09:35 2021 document-format-default=application/octet-stream
Sat Oct 30 17:09:35 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:09:35 2021 media-col-default={media-size={x-dimension=21000 y-dimension=29700} media-bottom-margin=400 media-left-margin=400 media-right-margin=400 media-top-margin=400}
Sat Oct 30 17:09:35 2021 output-bin-default=top
Sat Oct 30 17:09:35 2021 print-color-mode-default=color
Sat Oct 30 17:09:35 2021 printer-resolution-default=600dpi
Sat Oct 30 17:09:35 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:09:35 2021 finishings-default=none
Sat Oct 30 17:09:35 2021 ERROR: Failed creating file /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn: Permission denied
Sat Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: connecting-to-device
Sat Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: connecting-to-device
Sat Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:35 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:35 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:37 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:37 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:37 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:45 2021 on_job_state() in THREAD 139668381178560
Sat Oct 30 17:09:45 2021 [CUPS Notification] Job state changed on printer Kyocera_ECOSYS_M5521cdn: Retrying job on same printer.
Sat Oct 30 17:09:45 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:45 2021 [CUPS Notification] Job ID: 29
Sat Oct 30 17:09:45 2021 [CUPS Notification] Job State: none
Sat Oct 30 17:09:45 2021 [CUPS Notification] Job is processing: No
Sat Oct 30 17:09:45 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:45 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed to idle.
Sat Oct 30 17:09:45 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:45 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:45 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed to processing.
Sat Oct 30 17:09:45 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:45 2021 on_job_state() in THREAD 139668381178560
Sat Oct 30 17:09:45 2021 [CUPS Notification] Job state changed on printer Kyocera_ECOSYS_M5521cdn: Job #29 started.
Sat Oct 30 17:09:45 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:45 2021 [CUPS Notification] Job ID: 29
Sat Oct 30 17:09:45 2021 [CUPS Notification] Job State: job-printing
Sat Oct 30 17:09:45 2021 [CUPS Notification] Job is processing: Yes
Sat Oct 30 17:09:45 2021 [CUPS Notification] Kyocera_ECOSYS_M5521cdn starts processing a job.
Sat Oct 30 17:09:45 2021 [CUPS Notification] Kyocera_ECOSYS_M5521cdn is using the "implicitclass" CUPS backend, so let us search for a destination for this job.
Sat Oct 30 17:09:45 2021 Remote CUPS printers clustered as queue Kyocera_ECOSYS_M5521cdn:
Sat Oct 30 17:09:45 2021 ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/* (last job printed)
Sat Oct 30 17:09:45 2021 Checking state of remote printer ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/ on host Kyocera.local, IP (null), port 631.
Sat Oct 30 17:09:45 2021 HTTP connection to Kyocera.local:631 established.
Sat Oct 30 17:09:46 2021 Requested IPP attributes (get-printer-attributes) for printer with URI ipp://Kyocera.local:631/ipp/print
Sat Oct 30 17:09:46 2021
Sat Oct 30 17:09:46 2021 IPP request to Kyocera.local:631 successful.
Sat Oct 30 17:09:46 2021 IPP Response contains attributes values printer-name Kyocera, accepting-job 1
Sat Oct 30 17:09:46 2021 Printer ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/ on host Kyocera.local, port 631 is accepting jobs.
Sat Oct 30 17:09:46 2021 Printer ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/ on host Kyocera.local, port 631 is idle, take this as destination and stop searching.
Sat Oct 30 17:09:46 2021 600 600
Sat Oct 30 17:09:46 2021 Destination for job 29 to Kyocera_ECOSYS_M5521cdn: ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:46 2021 on_printer_modified() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer modified: Printer "Kyocera_ECOSYS_M5521cdn" modified by "root".
Sat Oct 30 17:09:46 2021 Requested IPP attributes (get-printer-attributes) for printer with URI ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 Full list of all IPP attributes:
Sat Oct 30 17:09:46 2021 Attr: attributes-charset
Sat Oct 30 17:09:46 2021 Value: utf-8
Sat Oct 30 17:09:46 2021 Keyword: utf-8
Sat Oct 30 17:09:46 2021 Attr: attributes-natural-language
Sat Oct 30 17:09:46 2021 Value: de-de
Sat Oct 30 17:09:46 2021 Keyword: de-de
Sat Oct 30 17:09:46 2021 Attr: printer-uri-supported
Sat Oct 30 17:09:46 2021 Value: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 Keyword: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 Attr: printer-name
Sat Oct 30 17:09:46 2021 Value: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 Keyword: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 Attr: device-uri
Sat Oct 30 17:09:46 2021 Value: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:09:46 2021 Keyword: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:09:46 2021 Attr: printer-make-and-model
Sat Oct 30 17:09:46 2021 Value: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:09:46 2021 Keyword: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:09:46 2021
Sat Oct 30 17:09:46 2021 Settings of printer Kyocera_ECOSYS_M5521cdn got modified, doing backup.
Sat Oct 30 17:09:46 2021 Recording printer options for Kyocera_ECOSYS_M5521cdn to /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 Recording option settings of the PPD file for Kyocera_ECOSYS_M5521cdn (ECOSYS M5521cdn, driverless, cups-filters 1.28.10):
Sat Oct 30 17:09:46 2021 ColorModel=RGB
Sat Oct 30 17:09:46 2021 cupsPrintQuality=Normal
Sat Oct 30 17:09:46 2021 Duplex=DuplexNoTumble
Sat Oct 30 17:09:46 2021 InputSlot=Tray1
Sat Oct 30 17:09:46 2021 MediaType=Stationery
Sat Oct 30 17:09:46 2021 OutputBin=Top
Sat Oct 30 17:09:46 2021 PageSize=A4
Sat Oct 30 17:09:46 2021 print-scaling=auto
Sat Oct 30 17:09:46 2021 Recording option settings from the IPP attributes for Kyocera_ECOSYS_M5521cdn:
Sat Oct 30 17:09:46 2021 printer-error-policy=retry-job
Sat Oct 30 17:09:46 2021 printer-is-accepting-jobs=true
Sat Oct 30 17:09:46 2021 printer-is-shared=false
Sat Oct 30 17:09:46 2021 printer-op-policy=default
Sat Oct 30 17:09:46 2021 printer-location=
Sat Oct 30 17:09:46 2021 printer-geo-location=unknown
Sat Oct 30 17:09:46 2021 printer-info=Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 printer-organization=
Sat Oct 30 17:09:46 2021 printer-organizational-unit=
Sat Oct 30 17:09:46 2021 job-quota-period=0
Sat Oct 30 17:09:46 2021 job-k-limit=0
Sat Oct 30 17:09:46 2021 job-page-limit=0
Sat Oct 30 17:09:46 2021 job-sheets-default=none,none
Sat Oct 30 17:09:46 2021 copies-default=1
Sat Oct 30 17:09:46 2021 cups-browsed-default=true
Sat Oct 30 17:09:46 2021 finishings-default=0
Sat Oct 30 17:09:46 2021 job-cancel-after-default=10800
Sat Oct 30 17:09:46 2021 job-hold-until-default=no-hold
Sat Oct 30 17:09:46 2021 job-priority-default=50
Sat Oct 30 17:09:46 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:09:46 2021 notify-events-default=job-completed
Sat Oct 30 17:09:46 2021 notify-lease-duration-default=86400
Sat Oct 30 17:09:46 2021 number-up-default=1
Sat Oct 30 17:09:46 2021 orientation-requested-default=0
Sat Oct 30 17:09:46 2021 output-bin-default=top
Sat Oct 30 17:09:46 2021 print-color-mode-default=color
Sat Oct 30 17:09:46 2021 print-quality-default=0
Sat Oct 30 17:09:46 2021 printer-resolution-default=600dpi
Sat Oct 30 17:09:46 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:09:46 2021 document-format-default=application/octet-stream
Sat Oct 30 17:09:46 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:09:46 2021 media-col-default={media-size={x-dimension=21000 y-dimension=29700} media-bottom-margin=400 media-left-margin=400 media-right-margin=400 media-top-margin=400}
Sat Oct 30 17:09:46 2021 output-bin-default=top
Sat Oct 30 17:09:46 2021 print-color-mode-default=color
Sat Oct 30 17:09:46 2021 printer-resolution-default=600dpi
Sat Oct 30 17:09:46 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:09:46 2021 finishings-default=none
Sat Oct 30 17:09:46 2021 ERROR: Failed creating file /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn: Permission denied
Sat Oct 30 17:09:46 2021 on_printer_modified() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer modified: Printer "Kyocera_ECOSYS_M5521cdn" modified by "peterb".
Sat Oct 30 17:09:46 2021 Requested IPP attributes (get-printer-attributes) for printer with URI ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 Full list of all IPP attributes:
Sat Oct 30 17:09:46 2021 Attr: attributes-charset
Sat Oct 30 17:09:46 2021 Value: utf-8
Sat Oct 30 17:09:46 2021 Keyword: utf-8
Sat Oct 30 17:09:46 2021 Attr: attributes-natural-language
Sat Oct 30 17:09:46 2021 Value: de-de
Sat Oct 30 17:09:46 2021 Keyword: de-de
Sat Oct 30 17:09:46 2021 Attr: printer-uri-supported
Sat Oct 30 17:09:46 2021 Value: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 Keyword: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 Attr: printer-name
Sat Oct 30 17:09:46 2021 Value: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 Keyword: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 Attr: device-uri
Sat Oct 30 17:09:46 2021 Value: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:09:46 2021 Keyword: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:09:46 2021 Attr: printer-make-and-model
Sat Oct 30 17:09:46 2021 Value: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:09:46 2021 Keyword: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:09:46 2021
Sat Oct 30 17:09:46 2021 Settings of printer Kyocera_ECOSYS_M5521cdn got modified, doing backup.
Sat Oct 30 17:09:46 2021 Recording printer options for Kyocera_ECOSYS_M5521cdn to /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 Recording option settings of the PPD file for Kyocera_ECOSYS_M5521cdn (ECOSYS M5521cdn, driverless, cups-filters 1.28.10):
Sat Oct 30 17:09:46 2021 ColorModel=RGB
Sat Oct 30 17:09:46 2021 cupsPrintQuality=Normal
Sat Oct 30 17:09:46 2021 Duplex=DuplexNoTumble
Sat Oct 30 17:09:46 2021 InputSlot=Tray1
Sat Oct 30 17:09:46 2021 MediaType=Stationery
Sat Oct 30 17:09:46 2021 OutputBin=Top
Sat Oct 30 17:09:46 2021 PageSize=A4
Sat Oct 30 17:09:46 2021 print-scaling=auto
Sat Oct 30 17:09:46 2021 Recording option settings from the IPP attributes for Kyocera_ECOSYS_M5521cdn:
Sat Oct 30 17:09:46 2021 printer-error-policy=retry-job
Sat Oct 30 17:09:46 2021 printer-is-accepting-jobs=true
Sat Oct 30 17:09:46 2021 printer-is-shared=false
Sat Oct 30 17:09:46 2021 printer-op-policy=default
Sat Oct 30 17:09:46 2021 printer-location=
Sat Oct 30 17:09:46 2021 printer-geo-location=unknown
Sat Oct 30 17:09:46 2021 printer-info=Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:46 2021 printer-organization=
Sat Oct 30 17:09:46 2021 printer-organizational-unit=
Sat Oct 30 17:09:46 2021 job-quota-period=0
Sat Oct 30 17:09:46 2021 job-k-limit=0
Sat Oct 30 17:09:46 2021 job-page-limit=0
Sat Oct 30 17:09:46 2021 job-sheets-default=none,none
Sat Oct 30 17:09:46 2021 copies-default=1
Sat Oct 30 17:09:46 2021 cups-browsed-default=true
Sat Oct 30 17:09:46 2021 finishings-default=0
Sat Oct 30 17:09:46 2021 job-cancel-after-default=10800
Sat Oct 30 17:09:46 2021 job-hold-until-default=no-hold
Sat Oct 30 17:09:46 2021 job-priority-default=50
Sat Oct 30 17:09:46 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:09:46 2021 notify-events-default=job-completed
Sat Oct 30 17:09:46 2021 notify-lease-duration-default=86400
Sat Oct 30 17:09:46 2021 number-up-default=1
Sat Oct 30 17:09:46 2021 orientation-requested-default=0
Sat Oct 30 17:09:46 2021 output-bin-default=top
Sat Oct 30 17:09:46 2021 print-color-mode-default=color
Sat Oct 30 17:09:46 2021 print-quality-default=0
Sat Oct 30 17:09:46 2021 printer-resolution-default=600dpi
Sat Oct 30 17:09:46 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:09:46 2021 document-format-default=application/octet-stream
Sat Oct 30 17:09:46 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:09:46 2021 media-col-default={media-size={x-dimension=21000 y-dimension=29700} media-bottom-margin=400 media-left-margin=400 media-right-margin=400 media-top-margin=400}
Sat Oct 30 17:09:46 2021 output-bin-default=top
Sat Oct 30 17:09:46 2021 print-color-mode-default=color
Sat Oct 30 17:09:46 2021 printer-resolution-default=600dpi
Sat Oct 30 17:09:46 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:09:46 2021 finishings-default=none
Sat Oct 30 17:09:46 2021 ERROR: Failed creating file /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn: Permission denied
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: connecting-to-device
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: connecting-to-device
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:46 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:46 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:47 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:47 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:47 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:56 2021 on_job_state() in THREAD 139668381178560
Sat Oct 30 17:09:56 2021 [CUPS Notification] Job state changed on printer Kyocera_ECOSYS_M5521cdn: Retrying job on same printer.
Sat Oct 30 17:09:56 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:56 2021 [CUPS Notification] Job ID: 29
Sat Oct 30 17:09:56 2021 [CUPS Notification] Job State: none
Sat Oct 30 17:09:56 2021 [CUPS Notification] Job is processing: No
Sat Oct 30 17:09:56 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:56 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed to idle.
Sat Oct 30 17:09:56 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:56 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:56 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed to processing.
Sat Oct 30 17:09:56 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:56 2021 on_job_state() in THREAD 139668381178560
Sat Oct 30 17:09:56 2021 [CUPS Notification] Job state changed on printer Kyocera_ECOSYS_M5521cdn: Job #29 started.
Sat Oct 30 17:09:56 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:56 2021 [CUPS Notification] Job ID: 29
Sat Oct 30 17:09:56 2021 [CUPS Notification] Job State: job-printing
Sat Oct 30 17:09:56 2021 [CUPS Notification] Job is processing: Yes
Sat Oct 30 17:09:56 2021 [CUPS Notification] Kyocera_ECOSYS_M5521cdn starts processing a job.
Sat Oct 30 17:09:56 2021 [CUPS Notification] Kyocera_ECOSYS_M5521cdn is using the "implicitclass" CUPS backend, so let us search for a destination for this job.
Sat Oct 30 17:09:56 2021 Remote CUPS printers clustered as queue Kyocera_ECOSYS_M5521cdn:
Sat Oct 30 17:09:56 2021 ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/* (last job printed)
Sat Oct 30 17:09:56 2021 Checking state of remote printer ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/ on host Kyocera.local, IP (null), port 631.
Sat Oct 30 17:09:56 2021 HTTP connection to Kyocera.local:631 established.
Sat Oct 30 17:09:56 2021 Requested IPP attributes (get-printer-attributes) for printer with URI ipp://Kyocera.local:631/ipp/print
Sat Oct 30 17:09:56 2021
Sat Oct 30 17:09:56 2021 IPP request to Kyocera.local:631 successful.
Sat Oct 30 17:09:56 2021 IPP Response contains attributes values printer-name Kyocera, accepting-job 1
Sat Oct 30 17:09:56 2021 Printer ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/ on host Kyocera.local, port 631 is accepting jobs.
Sat Oct 30 17:09:56 2021 Printer ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/ on host Kyocera.local, port 631 is idle, take this as destination and stop searching.
Sat Oct 30 17:09:56 2021 600 600
Sat Oct 30 17:09:56 2021 Destination for job 29 to Kyocera_ECOSYS_M5521cdn: ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/
Sat Oct 30 17:09:56 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:56 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:56 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:56 2021 on_printer_modified() in THREAD 139668381178560
Sat Oct 30 17:09:56 2021 [CUPS Notification] Printer modified: Printer "Kyocera_ECOSYS_M5521cdn" modified by "root".
Sat Oct 30 17:09:56 2021 Requested IPP attributes (get-printer-attributes) for printer with URI ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 Full list of all IPP attributes:
Sat Oct 30 17:09:56 2021 Attr: attributes-charset
Sat Oct 30 17:09:56 2021 Value: utf-8
Sat Oct 30 17:09:56 2021 Keyword: utf-8
Sat Oct 30 17:09:56 2021 Attr: attributes-natural-language
Sat Oct 30 17:09:56 2021 Value: de-de
Sat Oct 30 17:09:56 2021 Keyword: de-de
Sat Oct 30 17:09:56 2021 Attr: printer-uri-supported
Sat Oct 30 17:09:56 2021 Value: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 Keyword: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 Attr: printer-name
Sat Oct 30 17:09:56 2021 Value: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 Keyword: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 Attr: device-uri
Sat Oct 30 17:09:56 2021 Value: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:09:56 2021 Keyword: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:09:56 2021 Attr: printer-make-and-model
Sat Oct 30 17:09:56 2021 Value: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:09:56 2021 Keyword: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:09:56 2021
Sat Oct 30 17:09:56 2021 Settings of printer Kyocera_ECOSYS_M5521cdn got modified, doing backup.
Sat Oct 30 17:09:56 2021 Recording printer options for Kyocera_ECOSYS_M5521cdn to /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 Recording option settings of the PPD file for Kyocera_ECOSYS_M5521cdn (ECOSYS M5521cdn, driverless, cups-filters 1.28.10):
Sat Oct 30 17:09:56 2021 ColorModel=RGB
Sat Oct 30 17:09:56 2021 cupsPrintQuality=Normal
Sat Oct 30 17:09:56 2021 Duplex=DuplexNoTumble
Sat Oct 30 17:09:56 2021 InputSlot=Tray1
Sat Oct 30 17:09:56 2021 MediaType=Stationery
Sat Oct 30 17:09:56 2021 OutputBin=Top
Sat Oct 30 17:09:56 2021 PageSize=A4
Sat Oct 30 17:09:56 2021 print-scaling=auto
Sat Oct 30 17:09:56 2021 Recording option settings from the IPP attributes for Kyocera_ECOSYS_M5521cdn:
Sat Oct 30 17:09:56 2021 printer-error-policy=retry-job
Sat Oct 30 17:09:56 2021 printer-is-accepting-jobs=true
Sat Oct 30 17:09:56 2021 printer-is-shared=false
Sat Oct 30 17:09:56 2021 printer-op-policy=default
Sat Oct 30 17:09:56 2021 printer-location=
Sat Oct 30 17:09:56 2021 printer-geo-location=unknown
Sat Oct 30 17:09:56 2021 printer-info=Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 printer-organization=
Sat Oct 30 17:09:56 2021 printer-organizational-unit=
Sat Oct 30 17:09:56 2021 job-quota-period=0
Sat Oct 30 17:09:56 2021 job-k-limit=0
Sat Oct 30 17:09:56 2021 job-page-limit=0
Sat Oct 30 17:09:56 2021 job-sheets-default=none,none
Sat Oct 30 17:09:56 2021 copies-default=1
Sat Oct 30 17:09:56 2021 cups-browsed-default=true
Sat Oct 30 17:09:56 2021 finishings-default=0
Sat Oct 30 17:09:56 2021 job-cancel-after-default=10800
Sat Oct 30 17:09:56 2021 job-hold-until-default=no-hold
Sat Oct 30 17:09:56 2021 job-priority-default=50
Sat Oct 30 17:09:56 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:09:56 2021 notify-events-default=job-completed
Sat Oct 30 17:09:56 2021 notify-lease-duration-default=86400
Sat Oct 30 17:09:56 2021 number-up-default=1
Sat Oct 30 17:09:56 2021 orientation-requested-default=0
Sat Oct 30 17:09:56 2021 output-bin-default=top
Sat Oct 30 17:09:56 2021 print-color-mode-default=color
Sat Oct 30 17:09:56 2021 print-quality-default=0
Sat Oct 30 17:09:56 2021 printer-resolution-default=600dpi
Sat Oct 30 17:09:56 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:09:56 2021 document-format-default=application/octet-stream
Sat Oct 30 17:09:56 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:09:56 2021 media-col-default={media-size={x-dimension=21000 y-dimension=29700} media-bottom-margin=400 media-left-margin=400 media-right-margin=400 media-top-margin=400}
Sat Oct 30 17:09:56 2021 output-bin-default=top
Sat Oct 30 17:09:56 2021 print-color-mode-default=color
Sat Oct 30 17:09:56 2021 printer-resolution-default=600dpi
Sat Oct 30 17:09:56 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:09:56 2021 finishings-default=none
Sat Oct 30 17:09:56 2021 ERROR: Failed creating file /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn: Permission denied
Sat Oct 30 17:09:56 2021 on_printer_modified() in THREAD 139668381178560
Sat Oct 30 17:09:56 2021 [CUPS Notification] Printer modified: Printer "Kyocera_ECOSYS_M5521cdn" modified by "peterb".
Sat Oct 30 17:09:56 2021 Requested IPP attributes (get-printer-attributes) for printer with URI ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 Full list of all IPP attributes:
Sat Oct 30 17:09:56 2021 Attr: attributes-charset
Sat Oct 30 17:09:56 2021 Value: utf-8
Sat Oct 30 17:09:56 2021 Keyword: utf-8
Sat Oct 30 17:09:56 2021 Attr: attributes-natural-language
Sat Oct 30 17:09:56 2021 Value: de-de
Sat Oct 30 17:09:56 2021 Keyword: de-de
Sat Oct 30 17:09:56 2021 Attr: printer-uri-supported
Sat Oct 30 17:09:56 2021 Value: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 Keyword: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 Attr: printer-name
Sat Oct 30 17:09:56 2021 Value: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 Keyword: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 Attr: device-uri
Sat Oct 30 17:09:56 2021 Value: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:09:56 2021 Keyword: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:09:56 2021 Attr: printer-make-and-model
Sat Oct 30 17:09:56 2021 Value: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:09:56 2021 Keyword: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:09:56 2021
Sat Oct 30 17:09:56 2021 Settings of printer Kyocera_ECOSYS_M5521cdn got modified, doing backup.
Sat Oct 30 17:09:56 2021 Recording printer options for Kyocera_ECOSYS_M5521cdn to /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 Recording option settings of the PPD file for Kyocera_ECOSYS_M5521cdn (ECOSYS M5521cdn, driverless, cups-filters 1.28.10):
Sat Oct 30 17:09:56 2021 ColorModel=RGB
Sat Oct 30 17:09:56 2021 cupsPrintQuality=Normal
Sat Oct 30 17:09:56 2021 Duplex=DuplexNoTumble
Sat Oct 30 17:09:56 2021 InputSlot=Tray1
Sat Oct 30 17:09:56 2021 MediaType=Stationery
Sat Oct 30 17:09:56 2021 OutputBin=Top
Sat Oct 30 17:09:56 2021 PageSize=A4
Sat Oct 30 17:09:56 2021 print-scaling=auto
Sat Oct 30 17:09:56 2021 Recording option settings from the IPP attributes for Kyocera_ECOSYS_M5521cdn:
Sat Oct 30 17:09:56 2021 printer-error-policy=retry-job
Sat Oct 30 17:09:56 2021 printer-is-accepting-jobs=true
Sat Oct 30 17:09:56 2021 printer-is-shared=false
Sat Oct 30 17:09:56 2021 printer-op-policy=default
Sat Oct 30 17:09:56 2021 printer-location=
Sat Oct 30 17:09:56 2021 printer-geo-location=unknown
Sat Oct 30 17:09:56 2021 printer-info=Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:09:56 2021 printer-organization=
Sat Oct 30 17:09:56 2021 printer-organizational-unit=
Sat Oct 30 17:09:56 2021 job-quota-period=0
Sat Oct 30 17:09:56 2021 job-k-limit=0
Sat Oct 30 17:09:56 2021 job-page-limit=0
Sat Oct 30 17:09:56 2021 job-sheets-default=none,none
Sat Oct 30 17:09:56 2021 copies-default=1
Sat Oct 30 17:09:56 2021 cups-browsed-default=true
Sat Oct 30 17:09:56 2021 finishings-default=0
Sat Oct 30 17:09:56 2021 job-cancel-after-default=10800
Sat Oct 30 17:09:56 2021 job-hold-until-default=no-hold
Sat Oct 30 17:09:56 2021 job-priority-default=50
Sat Oct 30 17:09:56 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:09:56 2021 notify-events-default=job-completed
Sat Oct 30 17:09:56 2021 notify-lease-duration-default=86400
Sat Oct 30 17:09:56 2021 number-up-default=1
Sat Oct 30 17:09:56 2021 orientation-requested-default=0
Sat Oct 30 17:09:56 2021 output-bin-default=top
Sat Oct 30 17:09:56 2021 print-color-mode-default=color
Sat Oct 30 17:09:56 2021 print-quality-default=0
Sat Oct 30 17:09:56 2021 printer-resolution-default=600dpi
Sat Oct 30 17:09:56 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:09:56 2021 document-format-default=application/octet-stream
Sat Oct 30 17:09:56 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:09:56 2021 media-col-default={media-size={x-dimension=21000 y-dimension=29700} media-bottom-margin=400 media-left-margin=400 media-right-margin=400 media-top-margin=400}
Sat Oct 30 17:09:56 2021 output-bin-default=top
Sat Oct 30 17:09:56 2021 print-color-mode-default=color
Sat Oct 30 17:09:56 2021 printer-resolution-default=600dpi
Sat Oct 30 17:09:56 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:09:56 2021 finishings-default=none
Sat Oct 30 17:09:56 2021 ERROR: Failed creating file /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn: Permission denied
Sat Oct 30 17:09:56 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:56 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:56 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:57 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:57 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:57 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state reasons: connecting-to-device
Sat Oct 30 17:09:57 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state reasons: connecting-to-device
Sat Oct 30 17:09:57 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:57 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:57 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:57 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:57 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:57 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:57 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:57 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:09:58 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:09:58 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:09:58 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_job_state() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Job state changed on printer Kyocera_ECOSYS_M5521cdn: Retrying job on same printer.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 [CUPS Notification] Job ID: 29
Sat Oct 30 17:10:07 2021 [CUPS Notification] Job State: none
Sat Oct 30 17:10:07 2021 [CUPS Notification] Job is processing: No
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed to idle.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed to processing.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_job_state() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Job state changed on printer Kyocera_ECOSYS_M5521cdn: Job #29 started.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 [CUPS Notification] Job ID: 29
Sat Oct 30 17:10:07 2021 [CUPS Notification] Job State: job-printing
Sat Oct 30 17:10:07 2021 [CUPS Notification] Job is processing: Yes
Sat Oct 30 17:10:07 2021 [CUPS Notification] Kyocera_ECOSYS_M5521cdn starts processing a job.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Kyocera_ECOSYS_M5521cdn is using the "implicitclass" CUPS backend, so let us search for a destination for this job.
Sat Oct 30 17:10:07 2021 Remote CUPS printers clustered as queue Kyocera_ECOSYS_M5521cdn:
Sat Oct 30 17:10:07 2021 ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/* (last job printed)
Sat Oct 30 17:10:07 2021 Checking state of remote printer ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/ on host Kyocera.local, IP (null), port 631.
Sat Oct 30 17:10:07 2021 HTTP connection to Kyocera.local:631 established.
Sat Oct 30 17:10:07 2021 Requested IPP attributes (get-printer-attributes) for printer with URI ipp://Kyocera.local:631/ipp/print
Sat Oct 30 17:10:07 2021
Sat Oct 30 17:10:07 2021 IPP request to Kyocera.local:631 successful.
Sat Oct 30 17:10:07 2021 IPP Response contains attributes values printer-name Kyocera, accepting-job 1
Sat Oct 30 17:10:07 2021 Printer ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/ on host Kyocera.local, port 631 is accepting jobs.
Sat Oct 30 17:10:07 2021 Printer ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/ on host Kyocera.local, port 631 is idle, take this as destination and stop searching.
Sat Oct 30 17:10:07 2021 600 600
Sat Oct 30 17:10:07 2021 Destination for job 29 to Kyocera_ECOSYS_M5521cdn: ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_printer_modified() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer modified: Printer "Kyocera_ECOSYS_M5521cdn" modified by "peterb".
Sat Oct 30 17:10:07 2021 Requested IPP attributes (get-printer-attributes) for printer with URI ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 Full list of all IPP attributes:
Sat Oct 30 17:10:07 2021 Attr: attributes-charset
Sat Oct 30 17:10:07 2021 Value: utf-8
Sat Oct 30 17:10:07 2021 Keyword: utf-8
Sat Oct 30 17:10:07 2021 Attr: attributes-natural-language
Sat Oct 30 17:10:07 2021 Value: de-de
Sat Oct 30 17:10:07 2021 Keyword: de-de
Sat Oct 30 17:10:07 2021 Attr: printer-uri-supported
Sat Oct 30 17:10:07 2021 Value: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 Keyword: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 Attr: printer-name
Sat Oct 30 17:10:07 2021 Value: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 Keyword: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 Attr: device-uri
Sat Oct 30 17:10:07 2021 Value: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:10:07 2021 Keyword: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:10:07 2021 Attr: printer-make-and-model
Sat Oct 30 17:10:07 2021 Value: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:10:07 2021 Keyword: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:10:07 2021
Sat Oct 30 17:10:07 2021 Settings of printer Kyocera_ECOSYS_M5521cdn got modified, doing backup.
Sat Oct 30 17:10:07 2021 Recording printer options for Kyocera_ECOSYS_M5521cdn to /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 Recording option settings of the PPD file for Kyocera_ECOSYS_M5521cdn (ECOSYS M5521cdn, driverless, cups-filters 1.28.10):
Sat Oct 30 17:10:07 2021 ColorModel=RGB
Sat Oct 30 17:10:07 2021 cupsPrintQuality=Normal
Sat Oct 30 17:10:07 2021 Duplex=DuplexNoTumble
Sat Oct 30 17:10:07 2021 InputSlot=Tray1
Sat Oct 30 17:10:07 2021 MediaType=Stationery
Sat Oct 30 17:10:07 2021 OutputBin=Top
Sat Oct 30 17:10:07 2021 PageSize=A4
Sat Oct 30 17:10:07 2021 print-scaling=auto
Sat Oct 30 17:10:07 2021 Recording option settings from the IPP attributes for Kyocera_ECOSYS_M5521cdn:
Sat Oct 30 17:10:07 2021 printer-error-policy=retry-job
Sat Oct 30 17:10:07 2021 printer-is-accepting-jobs=true
Sat Oct 30 17:10:07 2021 printer-is-shared=false
Sat Oct 30 17:10:07 2021 printer-op-policy=default
Sat Oct 30 17:10:07 2021 printer-location=
Sat Oct 30 17:10:07 2021 printer-geo-location=unknown
Sat Oct 30 17:10:07 2021 printer-info=Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 printer-organization=
Sat Oct 30 17:10:07 2021 printer-organizational-unit=
Sat Oct 30 17:10:07 2021 job-quota-period=0
Sat Oct 30 17:10:07 2021 job-k-limit=0
Sat Oct 30 17:10:07 2021 job-page-limit=0
Sat Oct 30 17:10:07 2021 job-sheets-default=none,none
Sat Oct 30 17:10:07 2021 copies-default=1
Sat Oct 30 17:10:07 2021 cups-browsed-default=true
Sat Oct 30 17:10:07 2021 finishings-default=0
Sat Oct 30 17:10:07 2021 job-cancel-after-default=10800
Sat Oct 30 17:10:07 2021 job-hold-until-default=no-hold
Sat Oct 30 17:10:07 2021 job-priority-default=50
Sat Oct 30 17:10:07 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:10:07 2021 notify-events-default=job-completed
Sat Oct 30 17:10:07 2021 notify-lease-duration-default=86400
Sat Oct 30 17:10:07 2021 number-up-default=1
Sat Oct 30 17:10:07 2021 orientation-requested-default=0
Sat Oct 30 17:10:07 2021 output-bin-default=top
Sat Oct 30 17:10:07 2021 print-color-mode-default=color
Sat Oct 30 17:10:07 2021 print-quality-default=0
Sat Oct 30 17:10:07 2021 printer-resolution-default=600dpi
Sat Oct 30 17:10:07 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:10:07 2021 document-format-default=application/octet-stream
Sat Oct 30 17:10:07 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:10:07 2021 media-col-default={media-size={x-dimension=21000 y-dimension=29700} media-bottom-margin=400 media-left-margin=400 media-right-margin=400 media-top-margin=400}
Sat Oct 30 17:10:07 2021 output-bin-default=top
Sat Oct 30 17:10:07 2021 print-color-mode-default=color
Sat Oct 30 17:10:07 2021 printer-resolution-default=600dpi
Sat Oct 30 17:10:07 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:10:07 2021 finishings-default=none
Sat Oct 30 17:10:07 2021 ERROR: Failed creating file /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn: Permission denied
Sat Oct 30 17:10:07 2021 on_printer_modified() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer modified: Printer "Kyocera_ECOSYS_M5521cdn" modified by "root".
Sat Oct 30 17:10:07 2021 Requested IPP attributes (get-printer-attributes) for printer with URI ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 Full list of all IPP attributes:
Sat Oct 30 17:10:07 2021 Attr: attributes-charset
Sat Oct 30 17:10:07 2021 Value: utf-8
Sat Oct 30 17:10:07 2021 Keyword: utf-8
Sat Oct 30 17:10:07 2021 Attr: attributes-natural-language
Sat Oct 30 17:10:07 2021 Value: de-de
Sat Oct 30 17:10:07 2021 Keyword: de-de
Sat Oct 30 17:10:07 2021 Attr: printer-uri-supported
Sat Oct 30 17:10:07 2021 Value: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 Keyword: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 Attr: printer-name
Sat Oct 30 17:10:07 2021 Value: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 Keyword: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 Attr: device-uri
Sat Oct 30 17:10:07 2021 Value: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:10:07 2021 Keyword: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:10:07 2021 Attr: printer-make-and-model
Sat Oct 30 17:10:07 2021 Value: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:10:07 2021 Keyword: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:10:07 2021
Sat Oct 30 17:10:07 2021 Settings of printer Kyocera_ECOSYS_M5521cdn got modified, doing backup.
Sat Oct 30 17:10:07 2021 Recording printer options for Kyocera_ECOSYS_M5521cdn to /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 Recording option settings of the PPD file for Kyocera_ECOSYS_M5521cdn (ECOSYS M5521cdn, driverless, cups-filters 1.28.10):
Sat Oct 30 17:10:07 2021 ColorModel=RGB
Sat Oct 30 17:10:07 2021 cupsPrintQuality=Normal
Sat Oct 30 17:10:07 2021 Duplex=DuplexNoTumble
Sat Oct 30 17:10:07 2021 InputSlot=Tray1
Sat Oct 30 17:10:07 2021 MediaType=Stationery
Sat Oct 30 17:10:07 2021 OutputBin=Top
Sat Oct 30 17:10:07 2021 PageSize=A4
Sat Oct 30 17:10:07 2021 print-scaling=auto
Sat Oct 30 17:10:07 2021 Recording option settings from the IPP attributes for Kyocera_ECOSYS_M5521cdn:
Sat Oct 30 17:10:07 2021 printer-error-policy=retry-job
Sat Oct 30 17:10:07 2021 printer-is-accepting-jobs=true
Sat Oct 30 17:10:07 2021 printer-is-shared=false
Sat Oct 30 17:10:07 2021 printer-op-policy=default
Sat Oct 30 17:10:07 2021 printer-location=
Sat Oct 30 17:10:07 2021 printer-geo-location=unknown
Sat Oct 30 17:10:07 2021 printer-info=Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:07 2021 printer-organization=
Sat Oct 30 17:10:07 2021 printer-organizational-unit=
Sat Oct 30 17:10:07 2021 job-quota-period=0
Sat Oct 30 17:10:07 2021 job-k-limit=0
Sat Oct 30 17:10:07 2021 job-page-limit=0
Sat Oct 30 17:10:07 2021 job-sheets-default=none,none
Sat Oct 30 17:10:07 2021 copies-default=1
Sat Oct 30 17:10:07 2021 cups-browsed-default=true
Sat Oct 30 17:10:07 2021 finishings-default=0
Sat Oct 30 17:10:07 2021 job-cancel-after-default=10800
Sat Oct 30 17:10:07 2021 job-hold-until-default=no-hold
Sat Oct 30 17:10:07 2021 job-priority-default=50
Sat Oct 30 17:10:07 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:10:07 2021 notify-events-default=job-completed
Sat Oct 30 17:10:07 2021 notify-lease-duration-default=86400
Sat Oct 30 17:10:07 2021 number-up-default=1
Sat Oct 30 17:10:07 2021 orientation-requested-default=0
Sat Oct 30 17:10:07 2021 output-bin-default=top
Sat Oct 30 17:10:07 2021 print-color-mode-default=color
Sat Oct 30 17:10:07 2021 print-quality-default=0
Sat Oct 30 17:10:07 2021 printer-resolution-default=600dpi
Sat Oct 30 17:10:07 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:10:07 2021 document-format-default=application/octet-stream
Sat Oct 30 17:10:07 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:10:07 2021 media-col-default={media-size={x-dimension=21000 y-dimension=29700} media-bottom-margin=400 media-left-margin=400 media-right-margin=400 media-top-margin=400}
Sat Oct 30 17:10:07 2021 output-bin-default=top
Sat Oct 30 17:10:07 2021 print-color-mode-default=color
Sat Oct 30 17:10:07 2021 printer-resolution-default=600dpi
Sat Oct 30 17:10:07 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:10:07 2021 finishings-default=none
Sat Oct 30 17:10:07 2021 ERROR: Failed creating file /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn: Permission denied
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: connecting-to-device
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: connecting-to-device
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:07 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:07 2021 [CUPS Notification] Printer state reasons: none
Sat Oct 30 17:10:08 2021 on_printer_state_changed() in THREAD 139668381178560
Sat Oct 30 17:10:08 2021 [CUPS Notification] Printer state change on printer Kyocera_ECOSYS_M5521cdn: Printer "Kyocera_ECOSYS_M5521cdn" state changed.
Sat Oct 30 17:10:08 2021 [CUPS Notification] Printer state reasons: none
^CSat Oct 30 17:10:09 2021 Caught signal 2, shutting down ...
Sat Oct 30 17:10:09 2021 main loop exited
Sat Oct 30 17:10:09 2021 Processing printer list ...
Sat Oct 30 17:10:09 2021 === Remote printer overview ===
Sat Oct 30 17:10:09 2021 Printer ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/ (Kyocera.local, IP not determined): Local queue Kyocera_ECOSYS_M5521cdn, IPP Printer, Slave of None (Disappeared)
Sat Oct 30 17:10:09 2021 ===============================
Sat Oct 30 17:10:09 2021 Removing entry Kyocera_ECOSYS_M5521cdn (ipp://Kyocera%20ECOSYS%20M5521cdn._ipp._tcp.local/) and its CUPS queue.
Sat Oct 30 17:10:09 2021 Recording printer options for Kyocera_ECOSYS_M5521cdn to /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:09 2021 Recording option settings of the PPD file for Kyocera_ECOSYS_M5521cdn (ECOSYS M5521cdn, driverless, cups-filters 1.28.10):
Sat Oct 30 17:10:09 2021 ColorModel=RGB
Sat Oct 30 17:10:09 2021 cupsPrintQuality=Normal
Sat Oct 30 17:10:09 2021 Duplex=DuplexNoTumble
Sat Oct 30 17:10:09 2021 InputSlot=Tray1
Sat Oct 30 17:10:09 2021 MediaType=Stationery
Sat Oct 30 17:10:09 2021 OutputBin=Top
Sat Oct 30 17:10:09 2021 PageSize=A4
Sat Oct 30 17:10:09 2021 print-scaling=auto
Sat Oct 30 17:10:09 2021 Recording option settings from the IPP attributes for Kyocera_ECOSYS_M5521cdn:
Sat Oct 30 17:10:09 2021 printer-error-policy=retry-job
Sat Oct 30 17:10:09 2021 printer-is-accepting-jobs=true
Sat Oct 30 17:10:09 2021 printer-is-shared=false
Sat Oct 30 17:10:09 2021 printer-op-policy=default
Sat Oct 30 17:10:09 2021 printer-location=
Sat Oct 30 17:10:09 2021 printer-geo-location=unknown
Sat Oct 30 17:10:09 2021 printer-info=Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:09 2021 printer-organization=
Sat Oct 30 17:10:09 2021 printer-organizational-unit=
Sat Oct 30 17:10:09 2021 job-quota-period=0
Sat Oct 30 17:10:09 2021 job-k-limit=0
Sat Oct 30 17:10:09 2021 job-page-limit=0
Sat Oct 30 17:10:09 2021 job-sheets-default=none,none
Sat Oct 30 17:10:09 2021 copies-default=1
Sat Oct 30 17:10:09 2021 cups-browsed-default=true
Sat Oct 30 17:10:09 2021 finishings-default=0
Sat Oct 30 17:10:09 2021 job-cancel-after-default=10800
Sat Oct 30 17:10:09 2021 job-hold-until-default=no-hold
Sat Oct 30 17:10:09 2021 job-priority-default=50
Sat Oct 30 17:10:09 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:10:09 2021 notify-events-default=job-completed
Sat Oct 30 17:10:09 2021 notify-lease-duration-default=86400
Sat Oct 30 17:10:09 2021 number-up-default=1
Sat Oct 30 17:10:09 2021 orientation-requested-default=0
Sat Oct 30 17:10:09 2021 output-bin-default=top
Sat Oct 30 17:10:09 2021 print-color-mode-default=color
Sat Oct 30 17:10:09 2021 print-quality-default=0
Sat Oct 30 17:10:09 2021 printer-resolution-default=600dpi
Sat Oct 30 17:10:09 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:10:09 2021 document-format-default=application/octet-stream
Sat Oct 30 17:10:09 2021 media-default=iso_a4_210x297mm
Sat Oct 30 17:10:09 2021 media-col-default={media-size={x-dimension=21000 y-dimension=29700} media-bottom-margin=400 media-left-margin=400 media-right-margin=400 media-top-margin=400}
Sat Oct 30 17:10:09 2021 output-bin-default=top
Sat Oct 30 17:10:09 2021 print-color-mode-default=color
Sat Oct 30 17:10:09 2021 printer-resolution-default=600dpi
Sat Oct 30 17:10:09 2021 sides-default=two-sided-long-edge
Sat Oct 30 17:10:09 2021 finishings-default=none
Sat Oct 30 17:10:09 2021 ERROR: Failed creating file /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn: Permission denied
Sat Oct 30 17:10:09 2021 Requested IPP attributes (get-printer-attributes) for printer with URI ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:09 2021 Full list of all IPP attributes:
Sat Oct 30 17:10:09 2021 Attr: attributes-charset
Sat Oct 30 17:10:09 2021 Value: utf-8
Sat Oct 30 17:10:09 2021 Keyword: utf-8
Sat Oct 30 17:10:09 2021 Attr: attributes-natural-language
Sat Oct 30 17:10:09 2021 Value: de-de
Sat Oct 30 17:10:09 2021 Keyword: de-de
Sat Oct 30 17:10:09 2021 Attr: printer-uri-supported
Sat Oct 30 17:10:09 2021 Value: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:09 2021 Keyword: ipp://localhost/printers/Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:09 2021 Attr: printer-name
Sat Oct 30 17:10:09 2021 Value: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:09 2021 Keyword: Kyocera_ECOSYS_M5521cdn
Sat Oct 30 17:10:09 2021 Attr: device-uri
Sat Oct 30 17:10:09 2021 Value: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:10:09 2021 Keyword: implicitclass://Kyocera_ECOSYS_M5521cdn/
Sat Oct 30 17:10:09 2021 Attr: printer-make-and-model
Sat Oct 30 17:10:09 2021 Value: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:10:09 2021 Keyword: ECOSYS M5521cdn, driverless, cups-filters 1.28.10
Sat Oct 30 17:10:09 2021
Sat Oct 30 17:10:09 2021 Queue has still jobs or CUPS error!
Sat Oct 30 17:10:09 2021 Disabled printer 'Kyocera_ECOSYS_M5521cdn'
Sat Oct 30 17:10:09 2021 === Remote printer overview ===
Sat Oct 30 17:10:09 2021 ===============================
Sat Oct 30 17:10:09 2021 cups-browsed [BrowsePoll /run/cups/cups.sock:0]: IPP-Cancel-Subscription
Sat Oct 30 17:10:09 2021 free_local_printer() in THREAD 139668381178560
Sat Oct 30 17:10:09 2021 free_local_printer() in THREAD 139668381178560
peterb@black:~$
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Hmmm .. ERROR: Failed creating file /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn: Permission denied zeige mal ls -l /var/cache/cups/ sowie sudo apt -s purge cups-browsed
|
pbg
(Themenstarter)
Anmeldungsdatum: 16. Mai 2019
Beiträge: 65
|
Kellerkind_2009 schrieb: Hmmm .. ERROR: Failed creating file /var/cache/cups/cups-browsed-options-Kyocera_ECOSYS_M5521cdn: Permission denied zeige mal ls -l /var/cache/cups/
peterb@black:~$ ls -l /var/cache/cups/
insgesamt 12476
-rw------- 1 root lp 5284 Okt 5 10:03 192.168.2.32.snmp
-rw-r--r-- 1 root root 1131 Okt 26 18:33 cups-browsed-options-kyocera_ecosys_m5521cdn
-rw-r--r-- 1 root root 1131 Okt 30 17:10 cups-browsed-options-Kyocera_ECOSYS_M5521cdn
-rw-r--r-- 1 root root 1131 Okt 5 10:05 cups-browsed-options-Kyocera_ECOSYS_M5521cdn@Kyocera.local
-rw-r--r-- 1 root root 1116 Okt 27 11:50 cups-browsed-options-Kyocera_ECOSYS_M5521cdn_USB_
-rw-r----- 1 root lp 677 Okt 30 17:10 job.cache
-rw-r----- 1 root lp 677 Okt 30 17:09 job.cache.O
-rw-r--r-- 1 root root 2315 Okt 30 17:08 Kyocera_ECOSYS_M5521cdn.data
-rw-r--r-- 1 root root 1267 Okt 22 11:57 Kyocera_ECOSYS_M5521cdn@Kyocera.local.strings
-rw-r--r-- 1 root root 925 Okt 30 17:08 Kyocera_ECOSYS_M5521cdn.strings
-rw-r--r-- 1 root root 925 Okt 27 11:05 Kyocera_ECOSYS_M5521cdn_USB_.strings
-rw-r--r-- 1 root root 2301 Okt 26 20:11 Minolta.data
-rw-r--r-- 1 root root 599 Okt 26 20:11 Minolta.strings
-rw-r--r-- 1 root root 5 Okt 30 15:19 org.cups.cupsd
-rw------- 1 lp lp 12698956 Okt 26 20:06 ppds.dat
-rw-r--r-- 1 root root 380 Okt 24 12:12 ppd-updates
drwxrwxr-x 2 root lp 4096 Sep 10 19:20 rss
-rw-r--r-- 1 root root 457 Okt 26 20:06 Unknown.strings
sowie > sudo apt -s purge cups-browsed
>
peterb@black:~$ sudo apt -s purge cups-browsed
[sudo] Passwort für peterb:
Paketlisten werden gelesen… Fertig
Abhängigkeitsbaum wird aufgebaut… Fertig
Statusinformationen werden eingelesen… Fertig
Die folgenden Pakete werden ENTFERNT:
cups-browsed*
0 aktualisiert, 0 neu installiert, 1 zu entfernen und 0 nicht aktualisiert.
Purg cups-browsed [1.28.10-2]
|
Kellerkind_2009
Anmeldungsdatum: 26. November 2009
Beiträge: 19610
Wohnort: Schleswig-Holstein
|
Ok,dann machen wir das mal sudo apt purge cups-browsed sudo mv /var/cache/cups /var/cache/cups-old Neustart und Testen.
|
pbg
(Themenstarter)
Anmeldungsdatum: 16. Mai 2019
Beiträge: 65
|
Kellerkind_2009 schrieb: Ok,dann machen wir das mal sudo apt purge cups-browsed sudo mv /var/cache/cups /var/cache/cups-old Neustart und Testen.
Ja, das war's, vielen Dank!
Nachdem ich den Drucker gelöscht und manuell wieder hinzugefügt hatte, funktioniert es wieder.
Anscheinend ist in dem Autokonfigurationsscript eine Macke, wie gesagt, beim 21.04 ging es noch.
LG
Peter
|